AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

CBSE Class 12 Chemistry Sample Paper 2022-23 with Solutions

Step-by-step solutions to all 35 questions of the CBSE Class 12 Chemistry sample question paper for 2022-23, written the way the marking scheme awards marks, with every internal choice, every "any 3" part and both versions for visually challenged learners solved. Every key and number is checked against the official marking scheme and recomputed from the question, every equation is checked for balance, and every question has a doubt chat. Where the paper or the marking scheme slips (Q6, Q27, Q33), the solution gives the correct answer and says so.

CBSE Class 12 Chemistry Sample Question Paper 2022-23, subject code 043: 35 questions, 70 marks, 3 hours. Open any question to see the steps one at a time, ask a doubt about a step, or practise its chapter.

Section A: 18 multiple-choice questions with one correct answer, carrying 1 mark each; no internal choice

Q1

Question 1 (1 mark)

Chapter 7: Alcohols, Phenols and Ethers
The major product of acid catalysed dehydration of 1-methylcyclohexanol is:
  1. (A)1-methylcyclohexane
  2. (B)1-methylcyclohexene
  3. (C)1-cyclohexylmethanol
  4. (D)1-methylenecyclohexane

Tests: Acid-catalysed dehydration of alcohols and the Saytzeff rule.

Show solution
  1. Acid protonates the OH, water leaves, and the tertiary carbocation (C-1 carries the CH3\mathrm{CH_3}) loses a proton from a neighbouring carbon to give an alkene: C7H14O→H+, ΔC7H12+H2O\mathrm{C_7H_{14}O \xrightarrow{H^+,\ \Delta} C_7H_{12} + H_2O}.
  2. Losing H from a ring carbon (C-2) puts the double bond inside the ring: 1-methylcyclohexene, a trisubstituted alkene. Losing H from the CH₃ gives methylenecyclohexane, only disubstituted.
  3. Saytzeff (Zaitsev) rule: the more substituted alkene is the major product, so 1-methylcyclohexene.

    Why: (A) is not an alkene at all, and (C) is an alcohol, not a dehydration product.

Answer(B) 1-methylcyclohexene
Ask about this question
Q2

Question 2 (1 mark)

Chapter 6: Haloalkanes and Haloarenes
Which one of the following compounds is more reactive towards SN1S_N1 reaction?
  1. (A)CH2=CHCH2Br\mathrm{CH_2{=}CHCH_2Br}
  2. (B)C6H5CH2Br\mathrm{C_{6}H_{5}CH_{2}Br}
  3. (C)C6H5CH(C6H5)Br\mathrm{C_{6}H_{5}CH(C_{6}H_{5})Br}
  4. (D)C6H5CH(CH3)Br\mathrm{C_{6}H_{5}CH(CH_{3})Br}

Tests: Reactivity in SN1 reactions decided by carbocation stability.

Show solution
  1. The rate of an SN1S_N1 reaction is set by how stable the carbocation formed in the slow step is.
  2. The cations: allyl CH2=CHCH2+\mathrm{CH_2{=}CHCH_2^+} (one C=C to spread the charge), benzyl C6H5CH2+\mathrm{C_6H_5CH_2^+} (one ring), 1-phenylethyl C6H5C+HCH3\mathrm{C_6H_5\overset{+}{C}HCH_3} (one ring + one CH₃), diphenylmethyl (C6H5)2CH+\mathrm{(C_6H_5)_2CH^+} (two rings).
  3. The diphenylmethyl cation spreads its positive charge over two benzene rings by resonance: the most stable, so its bromide reacts fastest.
Answer(C) C₆H₅CH(C₆H₅)Br
Ask about this question
Q3

Question 3 (1 mark)

Chapter 4: The d- and f-Block Elements
KMnO4\mathrm{KMnO_{4}} is coloured due to:
  1. (A)d-d transitions
  2. (B)charge transfer from ligand to metal
  3. (C)unpaired electrons in d orbital of Mn
  4. (D)charge transfer from metal to ligand

Tests: Origin of colour in d⁰ oxoanions: ligand-to-metal charge transfer.

Show solution
  1. In MnO4−\mathrm{MnO_4^-} manganese is +7: [Ar]3d04s0\mathrm{[Ar]3d^04s^0}. With no d electrons there can be no d–d transition and no unpaired electron, so (A) and (C) are out.
  2. The intense purple colour comes from charge transfer: an electron jumps from a filled 2p orbital of oxygen (the ligand) to an empty 3d orbital of Mn (the metal), L → M.
Answer(B) charge transfer from ligand to metal
Ask about this question
Q4

Question 4 (1 mark)

Chapter 3: Chemical Kinetics
Which radioactive isotope would have the longer half-life 15O\mathrm{^{15}O} or 19O\mathrm{^{19}O}? (Given rate constants for 15O\mathrm{^{15}O} and 19O\mathrm{^{19}O} are 5.63×10−3 s−15.63 \times 10^{-3}\ \mathrm{s^{-1}} and k=2.38×10−2 s−1k = 2.38 \times 10^{-2}\ \mathrm{s^{-1}} respectively.)
  1. (A)15O\mathrm{^{15}O}
  2. (B)19O\mathrm{^{19}O}
  3. (C)Both will have the same half-life
  4. (D)None of the above, information given is insufficient

Tests: Half-life of a first-order reaction from its rate constant.

Show solution
  1. Radioactive decay is first order: t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}, so the smaller rate constant gives the longer half-life.
  2. 15O\mathrm{^{15}O}: t1/2=0.6935.63×10−3=123t_{1/2} = \dfrac{0.693}{5.63 \times 10^{-3}} = 123 s. 19O\mathrm{^{19}O}: t1/2=0.6932.38×10−2=29.1t_{1/2} = \dfrac{0.693}{2.38 \times 10^{-2}} = 29.1 s.
Answer(A) ¹⁵O (k is smaller: t½ ≈ 123 s against 29 s)
Ask about this question
Q5

Question 5 (1 mark)

Chapter 2: Electrochemistry
The molar conductivity of CH3COOH\mathrm{CH_{3}COOH} at infinite dilution is 390 S cm2/mol\mathrm{S\,cm^2/mol}. Using the graph and given information, the molar conductivity of CH3COOK\mathrm{CH_{3}COOK} will be: (The paper's graph plots Λ\Lambda (S cm2/mol\mathrm{S\,cm^2/mol}, axis 75 to 425) against (c/M)1/2(c/\mathrm{M})^{1/2} (0 to 0.3) for HCl and KCl. Both are nearly straight lines falling gently with concentration: the HCl line starts at about 425 at c=0c = 0 and the KCl line at about 150.)
  1. (A)100 S cm2/mol\mathrm{S\,cm^2/mol}
  2. (B)115 S cm2/mol\mathrm{S\,cm^2/mol}
  3. (C)150 S cm2/mol\mathrm{S\,cm^2/mol}
  4. (D)125 S cm2/mol\mathrm{S\,cm^2/mol}
  1. VI
    For visually challenged learners: What is the molar conductance at infinite dilution for sodium chloride if the molar conductance at infinite dilution of Na+\mathrm{Na^+} and Cl−\mathrm{Cl^-} ions are 51.12×10−4 S cm2/mol51.12 \times 10^{-4}\ \mathrm{S\,cm^2/mol} and 73.54×10−4 S cm2/mol73.54 \times 10^{-4}\ \mathrm{S\,cm^2/mol} respectively? (A) 124.66 S cm2/mol\mathrm{S\,cm^2/mol} (B) 22.42 S cm2/mol\mathrm{S\,cm^2/mol} (C) 198.20 S cm2/mol\mathrm{S\,cm^2/mol} (D) 175.78 S cm2/mol\mathrm{S\,cm^2/mol}

Tests: Kohlrausch's law of independent migration of ions, with values read from a graph.

Show solution

  1. Strong electrolytes give straight lines; extrapolating to c=0c = 0 gives Λm∘(HCl)=425\Lambda^\circ_m(\mathrm{HCl}) = 425 and Λm∘(KCl)=150 S cm2 mol−1\Lambda^\circ_m(\mathrm{KCl}) = 150\ \mathrm{S\,cm^2\,mol^{-1}}.
  2. Kohlrausch's law: Λm∘(CH3COOK)=λ∘(CH3COO−)+λ∘(K+)\Lambda^\circ_m(\mathrm{CH_3COOK}) = \lambda^\circ(\mathrm{CH_3COO^-}) + \lambda^\circ(\mathrm{K^+}) =Λm∘(CH3COOH)+Λm∘(KCl)−Λm∘(HCl)= \Lambda^\circ_m(\mathrm{CH_3COOH}) + \Lambda^\circ_m(\mathrm{KCl}) - \Lambda^\circ_m(\mathrm{HCl}).

    Why: Adding KCl and taking away HCl swaps H⁺ for K⁺; the Cl⁻ terms cancel.

  3. =390+150−425=115 S cm2 mol−1= 390 + 150 - 425 = 115\ \mathrm{S\,cm^2\,mol^{-1}}.
Answer(B) 115 S cm²/mol

VI For visually challenged learners: What is the molar conductance at infinite dilution for sodium chloride if the molar conductance at infinite dilution of Na+\mathrm{Na^+} and Cl−\mathrm{Cl^-} ions are 51.12×10−4 S cm2/mol51.12 \times 10^{-4}\ \mathrm{S\,cm^2/mol} and 73.54×10−4 S cm2/mol73.54 \times 10^{-4}\ \mathrm{S\,cm^2/mol} respectively? (A) 124.66 S cm2/mol\mathrm{S\,cm^2/mol} (B) 22.42 S cm2/mol\mathrm{S\,cm^2/mol} (C) 198.20 S cm2/mol\mathrm{S\,cm^2/mol} (D) 175.78 S cm2/mol\mathrm{S\,cm^2/mol}

  1. Kohlrausch's law: Λm∘(NaCl)=λ∘(Na+)+λ∘(Cl−)=(51.12+73.54)×10−4=124.66×10−4 S m2 mol−1\Lambda^\circ_m(\mathrm{NaCl}) = \lambda^\circ(\mathrm{Na^+}) + \lambda^\circ(\mathrm{Cl^-}) = (51.12 + 73.54) \times 10^{-4} = 124.66 \times 10^{-4}\ \mathrm{S\,m^2\,mol^{-1}}.
  2. Since 1 S m2=104 S cm21\ \mathrm{S\,m^2} = 10^4\ \mathrm{S\,cm^2}, this is 124.66 S cm2 mol−1124.66\ \mathrm{S\,cm^2\,mol^{-1}}, option (A).

    Why: The paper prints the ion values with S cm²/mol; with ×10⁻⁴ they are in S m²/mol, as the scheme's answer (124.66 × 10⁻⁴ S m² mol⁻¹) shows.

Answer(A) 124.66 S cm²/mol (= 124.66 × 10⁻⁴ S m² mol⁻¹)
Ask about this question
Q6

Question 6 (1 mark)

Chapter 3: Chemical Kinetics
For the reaction, A + 2B → AB₂, the order w.r.t. reactant A is 2 and w.r.t. reactant B. What will be change in rate of reaction if the concentration of A is doubled and B is halved?
  1. (A)increases four times
  2. (B)decreases four times
  3. (C)increases two times
  4. (D)no change

Tests: Effect of concentration changes on rate, from the orders in the rate law.

Show solution
  1. The paper breaks off before giving B's order. The marking scheme writes Rate = k[A]², i.e. it takes the order in B as zero.
  2. Then rate =k[A]2[B]0= k[\mathrm{A}]^2[\mathrm{B}]^0, and the new rate =k(2[A])2=4k[A]2= k(2[\mathrm{A}])^2 = 4k[\mathrm{A}]^2: four times. Halving B changes nothing.
  3. (Had B been first order, the rate would change by 22×12=22^2 \times \dfrac{1}{2} = 2, option (C).)
Answer(A) increases four times (zero order in B, as the scheme takes it)
Ask about this question
Q7

Question 7 (1 mark)

Chapter 9: Amines
Arrange the following in the increasing order of their boiling points: A: Butanamine, B: N,N-Dimethylethanamine, C: N-Ethylethanamine
  1. (A)C<B<A
  2. (B)A<B<C
  3. (C)A<C<B
  4. (D)B<C<A

Tests: Boiling points of isomeric amines and hydrogen bonding.

Show solution
  1. All three are C4H11N\mathrm{C_4H_{11}N} (same molar mass): A is a primary amine (CH3CH2CH2CH2NH2\mathrm{CH_3CH_2CH_2CH_2NH_2}, two N–H), C is secondary ((C2H5)2NH\mathrm{(C_2H_5)_2NH}, one N–H), B is tertiary ((CH3)2NC2H5\mathrm{(CH_3)_2NC_2H_5}, no N–H).
  2. Intermolecular hydrogen bonding needs N–H: most in the primary amine, none in the tertiary. Boiling points (about 351 K, 329 K and 310 K) follow: B < C < A.
Answer(D) B < C < A
Ask about this question
Q8

Question 8 (1 mark)

Chapter 5: Coordination Compounds
The CFSE of [CoCl6]3−\mathrm{[CoCl_6]^{3-}} is 18000 cm−1\mathrm{cm^{-1}} the CFSE for [CoCl4]−\mathrm{[CoCl_4]^-} will be:
  1. (A)18000 cm−1\mathrm{cm^{-1}}
  2. (B)8000 cm−1\mathrm{cm^{-1}}
  3. (C)2000 cm−1\mathrm{cm^{-1}}
  4. (D)16000 cm−1\mathrm{cm^{-1}}

Tests: Crystal field splitting in tetrahedral and octahedral complexes: Δt = (4/9)Δo.

Show solution
  1. Both complexes have the same metal ion (Co3+\mathrm{Co^{3+}}) and ligand (Cl−\mathrm{Cl^-}); one is octahedral, the other tetrahedral. (The paper uses "CFSE" for the splitting energy Δ\Delta.)
  2. For the same metal and ligands, Δt=49Δo=49×18000=8000 cm−1\Delta_t = \dfrac{4}{9}\Delta_o = \dfrac{4}{9} \times 18000 = 8000\ \mathrm{cm^{-1}}.

    Why: Only four ligands, and none points straight at a d orbital, so the splitting is smaller.

Answer(B) 8000 cm⁻¹
Ask about this question
Q9

Question 9 (1 mark)

Chapter 7: Alcohols, Phenols and Ethers
What would be the major product of the following reaction? C6H5−CH2−OC6H5+HBr→A+B\mathrm{C_6H_5{-}CH_2{-}OC_6H_5 + HBr \rightarrow A + B}
  1. (A)A = C6H5CH2OH\mathrm{C_{6}H_{5}CH_{2}OH}, B = C6H6\mathrm{C_{6}H_{6}}
  2. (B)A = C6H5CH2OH\mathrm{C_{6}H_{5}CH_{2}OH}, B = C6H5Br\mathrm{C_{6}H_{5}Br}
  3. (C)A = C6H5CH3\mathrm{C_{6}H_{5}CH_{3}}, B = C6H5Br\mathrm{C_{6}H_{5}Br}
  4. (D)A = C6H5CH2Br\mathrm{C_{6}H_{5}CH_{2}Br}, B = C6H5OH\mathrm{C_{6}H_{5}OH}

Tests: Cleavage of alkyl aryl ethers by HX.

Show solution
  1. HBr protonates the ether oxygen; then Br⁻ (or the leaving step) breaks a C–O bond. The O–phenyl bond has partial double-bond character (the O lone pair conjugates with the ring) and an aryl carbon cannot be attacked by Br⁻, so it stays.
  2. The benzyl C–O bond breaks easily (a stable benzyl carbocation, or SN2 at CH₂): C6H5CH2OC6H5+HBr→C6H5CH2Br+C6H5OH\mathrm{C_{6}H_{5}CH_{2}OC_{6}H_{5}} + \mathrm{HBr} \rightarrow \mathrm{C_{6}H_{5}CH_{2}Br} + \mathrm{C_{6}H_{5}OH}.
Answer(D) A = C₆H₅CH₂Br, B = C₆H₅OH
Ask about this question
Q10

Question 10 (1 mark)

Chapter 9: Amines
Which of the following statements is not correct for amines?
  1. (A)Most alkyl amines are more basic than ammonia solution.
  2. (B)pKb\mathrm{pK_b} value of ethylamine is lower than benzylamine.
  3. (C)CH3NH2\mathrm{CH_{3}NH_{2}} on reaction with nitrous acid releases NO2\mathrm{NO_{2}} gas.
  4. (D)Hinsberg’s reagent reacts with secondary amines to form sulphonamides.

Tests: Basicity and characteristic reactions of amines (nitrous acid, Hinsberg).

Show solution
  1. Primary aliphatic amines react with nitrous acid to give an unstable diazonium salt that loses nitrogen: CH3NH2+HNO2→CH3OH+N2+H2O\mathrm{CH_3NH_2 + HNO_2 \rightarrow CH_3OH + N_2 + H_2O}. The gas is N2\mathrm{N_2}, not NO2\mathrm{NO_2}, so (C) is wrong.
  2. (A) is true (the +I effect of alkyl groups). (B) is true: ethylamine pKb 3.29, benzylamine 4.70. (D) is true: secondary amines give N,N-dialkylbenzenesulphonamides.
Answer(C) CH₃NH₂ with nitrous acid gives N₂, not NO₂
Ask about this question
Q11

Question 11 (1 mark)

Chapter 8: Aldehydes, Ketones and Carboxylic Acids
Which of the following tests/ reactions is given by aldehydes as well as ketones?
  1. (A)Fehling’s test
  2. (B)Tollens’ test
  3. (C)2,4 DNP test
  4. (D)Cannizzaro reaction

Tests: Tests that distinguish aldehydes and ketones, and the one they share.

Show solution
  1. 2,4-Dinitrophenylhydrazine adds to any C=O group and loses water to give a yellow-orange 2,4-dinitrophenylhydrazone: aldehydes and ketones both give it.
  2. Fehling's and Tollens' tests need an easily oxidised aldehyde H, and the Cannizzaro reaction is given only by aldehydes without an α-hydrogen. Ketones give none of the three.

    Why: The scheme's reason says these are shown by 'alcohols only'; it means aldehydes only.

Answer(C) 2,4 DNP test
Ask about this question
Q12

Question 12 (1 mark)

Chapter 3: Chemical Kinetics
Arrhenius equation can be represented graphically as follows: (The paper's graph plots ln⁡k (s−1)\ln k\ (\mathrm{s^{-1}}) on the y-axis against 1T (K−1)\dfrac{1}{T}\ (\mathrm{K^{-1}}) on the x-axis: a straight line that starts on the y-axis and falls to the right.) The (i) intercept and (ii) slope of the graph are:
  1. (A)(i) ln⁡A\ln A (ii) Ea/RE_a/R
  2. (B)(i) AA (ii) EaE_a
  3. (C)(i) ln⁡A\ln A (ii) −Ea/R-E_a/R
  4. (D)(i) AA (ii) −Ea-E_a
  1. VI
    For visually challenged learners: The unit of rate constant for the reaction 2A+2B→A2B2\mathrm{2A + 2B \rightarrow A_2B_2} which has rate =k[A]2[B]= k[\mathrm{A}]^2[\mathrm{B}] is: (A) mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}} (B) s−1\mathrm{s^{-1}} (C) mol L−1\mathrm{mol\,L^{-1}} (D) mol−2 L2 s−1\mathrm{mol^{-2}\,L^2\,s^{-1}}

Tests: The linear form of the Arrhenius equation and its graph.

Show solution

  1. Arrhenius: k=A e−Ea/RTk = A\,e^{-E_a/RT}. Taking natural logs: ln⁡k=ln⁡A−EaR⋅1T\ln k = \ln A - \dfrac{E_a}{R}\cdot\dfrac{1}{T}.
  2. This is y=c+mxy = c + mx with y=ln⁡ky = \ln k and x=1/Tx = 1/T: intercept ln⁡A\ln A, slope −EaR-\dfrac{E_a}{R} (negative, as the falling line shows).
Answer(C) (i) ln A (ii) −Ea/R

VI For visually challenged learners: The unit of rate constant for the reaction 2A+2B→A2B2\mathrm{2A + 2B \rightarrow A_2B_2} which has rate =k[A]2[B]= k[\mathrm{A}]^2[\mathrm{B}] is: (A) mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}} (B) s−1\mathrm{s^{-1}} (C) mol L−1\mathrm{mol\,L^{-1}} (D) mol−2 L2 s−1\mathrm{mol^{-2}\,L^2\,s^{-1}}

  1. Overall order =2+1=3= 2 + 1 = 3. k=rate[A]2[B]=mol L−1 s−1(mol L−1)3=mol−2 L2 s−1k = \dfrac{\text{rate}}{[\mathrm{A}]^2[\mathrm{B}]} = \dfrac{\mathrm{mol\,L^{-1}\,s^{-1}}}{(\mathrm{mol\,L^{-1}})^3} = \mathrm{mol^{-2}\,L^2\,s^{-1}}.
Answer(D) mol⁻² L² s⁻¹ (third order)
Ask about this question
Q13

Question 13 (1 mark)

Chapter 5: Coordination Compounds
The number of ions formed on dissolving one molecule of FeSO4⋅(NH4)2SO4⋅6H2O\mathrm{FeSO_{4}}\cdot \mathrm{(NH_{4})_{2}SO_{4}}\cdot 6\mathrm{H_{2}O} in water is:
  1. (A)3
  2. (B)4
  3. (C)5
  4. (D)6

Tests: Double salts versus coordination compounds: complete dissociation into simple ions.

Show solution
  1. Mohr's salt is a double salt, not a complex: in water it breaks up completely into the simple ions of its two salts.
  2. FeSO4⋅(NH4)2SO4⋅6H2O→Fe2++2NH4++2SO42−+6H2O\mathrm{FeSO_4{\cdot}(NH_4)_2SO_4{\cdot}6H_2O \rightarrow Fe^{2+} + 2NH_4^+ + 2SO_4^{2-} + 6H_2O}: 1+2+2=51 + 2 + 2 = 5 ions.
Answer(C) 5
Ask about this question
Q14

Question 14 (1 mark)

Chapter 8: Aldehydes, Ketones and Carboxylic Acids
The oxidation of toluene to benzaldehyde by chromyl chloride is called
  1. (A)Etard reaction
  2. (B)Reimer-Tiemann reaction
  3. (C)Stephen’s reaction
  4. (D)Cannizzaro’s reaction

Tests: Named reactions for preparing aldehydes: the Étard reaction.

Show solution
  1. Chromyl chloride oxidises the methyl group of toluene to a chromium complex, which water hydrolyses to benzaldehyde: C6H5CH3→CrO2Cl2, CS2C6H5CH(OCrOHCl2)2→H3O+C6H5CHO\mathrm{C_6H_5CH_3 \xrightarrow{CrO_2Cl_2,\ CS_2} C_6H_5CH(OCrOHCl_2)_2 \xrightarrow{H_3O^+} C_6H_5CHO}.
  2. This is the Étard reaction. Reimer–Tiemann puts –CHO on phenol, Stephen reduces nitriles to aldehydes, and Cannizzaro disproportionates aldehydes.
Answer(A) Etard reaction
Ask about this question
Q15

Question 15 (1 mark)

Chapter 7: Alcohols, Phenols and Ethers
Assertion (A): An ether is more volatile than an alcohol of comparable molecular mass.
Reason (R): Ethers are polar in nature.
  1. (A)Both A and R are true and R is the correct explanation of A
  2. (B)Both A and R are true but R is not the correct explanation of A.
  3. (C)A is true but R is false.
  4. (D)A is false but R is true.

Tests: Boiling points of ethers versus alcohols: hydrogen bonding.

Show solution
  1. A is true: ethers have no O–H, so their molecules cannot hydrogen-bond to one another; they boil far lower than alcohols of similar mass (diethyl ether 308 K, butan-1-ol 391 K).
  2. R is true: the C–O–C bond is bent and the molecule has a small dipole moment. But polarity would raise the boiling point; it does not explain the volatility, which comes from the missing hydrogen bonds.
Answer(B) Both true, R is not the explanation
Ask about this question
Q16

Question 16 (1 mark)

Chapter 10: Biomolecules
Assertion (A): Proteins are found to have two different types of secondary structures viz alpha-helix and beta-pleated sheet structure.
Reason (R): The secondary structure of proteins is stabilized by hydrogen bonding.
  1. (A)Both A and R are true and R is the correct explanation of A
  2. (B)Both A and R are true but R is not the correct explanation of A.
  3. (C)A is true but R is false.
  4. (D)A is false but R is true.

Tests: Secondary structure of proteins: α-helix, β-pleated sheet and hydrogen bonding.

Show solution
  1. A is true: the polypeptide chain either coils into an α-helix or lies in β-pleated sheets.
  2. R is true: both are held by hydrogen bonds between C=O and N–H groups of peptide bonds. But that is true of both forms alike; it does not explain why there are two different types.
Answer(B) Both true, R is not the explanation
Ask about this question
Q17

Question 17 (1 mark)

Chapter 4: The d- and f-Block Elements
Assertion (A): Magnetic moment values of actinides are lesser than the theoretically predicted values.
Reason (R): Actinide elements are strongly paramagnetic.
  1. (A)Both A and R are true and R is the correct explanation of A
  2. (B)Both A and R are true but R is not the correct explanation of A.
  3. (C)A is true but R is false.
  4. (D)A is false but R is true.

Tests: Magnetic properties of the actinoids.

Show solution
  1. A is true: the observed moments fall below the values calculated for the 5f electrons, because the 5f electrons are less effectively shielded and their orbital contribution is partly quenched by the surroundings.
  2. R is true: actinides (and their ions) have unpaired 5f electrons, so they are strongly paramagnetic. But being paramagnetic does not explain why the moments are lower than predicted.
Answer(B) Both true, R is not the explanation
Ask about this question
Q18

Question 18 (1 mark)

Chapter 9: Amines
Assertion (A): Tertiary amines are more basic than corresponding secondary and primary amines in gaseous state.
Reason (R): Tertiary amines have three alkyl groups which cause +I effect.
  1. (A)Both A and R are true and R is the correct explanation of A
  2. (B)Both A and R are true but R is not the correct explanation of A.
  3. (C)A is true but R is false.
  4. (D)A is false but R is true.

Tests: Basicity of amines in the gas phase: the +I effect.

Show solution
  1. In the gas phase there is no solvent, so only the inductive effect matters: each alkyl group pushes electron density onto N and stabilises the protonated cation.
  2. Three alkyl groups give the largest +I effect: 3° > 2° > 1° > NH₃. A is true and R explains it.

    Why: In water the order changes (solvation and steric effects), which is why the assertion says gaseous state.

Answer(A) Both true, R is the explanation
Ask about this question

Section B: 7 very short answer questions carrying 2 marks each, with internal choice in two questions

Q19

Question 19 (2 marks)

Chapter 3: Chemical Kinetics
A first-order reaction takes 69.3 min for 50% completion. What is the time needed for 80% of the reaction to get completed? (Given: log 5 = 0.6990, log 8 = 0.9030, log 2 = 0.3010)

Tests: Integrated rate equation of a first-order reaction and its half-life.

Show solution
  1. Half-life: t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}, so k=0.69369.3=0.01 min−1k = \dfrac{0.693}{69.3} = 0.01\ \mathrm{min^{-1}}.
  2. 80% complete: [R]=20%[R] = 20\% of [R]0[R]_0. First order: t=2.303klog⁡[R]0[R]=2.3030.01log⁡10020t = \dfrac{2.303}{k}\log\dfrac{[R]_0}{[R]} = \dfrac{2.303}{0.01}\log\dfrac{100}{20}.
  3. t=230.3log⁡5=230.3×0.6990=160.98t = 230.3 \log 5 = 230.3 \times 0.6990 = 160.98 min ≈161\approx 161 min.

    Why: The scheme writes 160.9 min (230.3 × 0.6990 truncated).

Answert ≈ 161 min (160.98 min)
Ask about this question
Q20

Question 20 (2 marks)

Chapter 10: Biomolecules
Attempt either (a) and (b), or the OR part.
  1. (a)
    Account for the following: There are 5 OH groups in glucose
  2. (b)
    Glucose is a reducing sugar
  3. OR (a)
    OR: What happens when D-glucose is treated with the following reagents: Bromine water
  4. OR (b)
    HNO3\mathrm{HNO_{3}}

Tests: Structure of glucose from its reactions: acetylation and oxidation.

Show solution

(a) Account for the following: There are 5 OH groups in glucose

  1. Glucose reacts with acetic anhydride to give a pentaacetate: OHC(CHOH)4CH2OH+5(CH3CO)2O→OHC(CHOCOCH3)4CH2OCOCH3+5CH3COOH\mathrm{OHC(CHOH)_{4}CH_{2}OH} + 5\mathrm{(CH_{3}CO)_{2}O} \rightarrow \mathrm{OHC(CHOCOCH_{3})_{4}CH_{2}OCOCH_{3}} + 5\mathrm{CH_{3}COOH}.
  2. Five acetyl groups are taken up, so glucose has five –OH groups. The pentaacetate is stable, so the –OH groups sit on five different carbons (two –OH on one carbon would lose water).
AnswerAcetylation gives a stable glucose pentaacetate: five –OH on different carbons

(b) Glucose is a reducing sugar

  1. Glucose has a free aldehyde group (in its open-chain form), which is easily oxidised: it reduces Fehling's solution to red Cu₂O and Tollens' reagent to silver.
  2. With Fehling's solution: HOCH2(CHOH)4CHO+2Cu2++2H2O→HOCH2(CHOH)4COOH+Cu2O+4H+\mathrm{HOCH_2(CHOH)_4CHO + 2Cu^{2+} + 2H_2O \rightarrow HOCH_2(CHOH)_4COOH + Cu_2O + 4H^+} (gluconic acid and a red precipitate).
AnswerIts –CHO group reduces Fehling's (red Cu₂O) and Tollens' reagents

OR (a) OR: What happens when D-glucose is treated with the following reagents: Bromine water

  1. Bromine water, a mild oxidant, oxidises only the –CHO group to –COOH, giving gluconic acid: OHC(CHOH)4CH2OH+Br2+H2O→HOOC(CHOH)4CH2OH+2HBr\mathrm{OHC(CHOH)_{4}CH_{2}OH} + \mathrm{Br_{2}} + \mathrm{H_{2}O} \rightarrow \mathrm{HOOC(CHOH)_{4}CH_{2}OH} + 2\mathrm{HBr}.
  2. This shows that the carbonyl group of glucose is an aldehyde.
AnswerGluconic acid, HOOC(CHOH)₄CH₂OH

OR (b) HNO3\mathrm{HNO_{3}}

  1. Nitric acid, a stronger oxidant, oxidises both ends: –CHO and the primary –CH2OH\mathrm{CH_2OH} both become –COOH, giving saccharic (glucaric) acid: HOCH2(CHOH)4CHO+3[O]→HNO3HOOC(CHOH)4COOH+H2O\mathrm{HOCH_2(CHOH)_4CHO + 3[O] \xrightarrow{HNO_3} HOOC(CHOH)_4COOH + H_2O}.
  2. Gluconic acid gives the same saccharic acid with nitric acid: this shows glucose has a primary alcohol (–CH₂OH) group.
AnswerSaccharic acid, HOOC(CHOH)₄COOH
Ask about this question
Q21

Question 21 (2 marks)

Chapter 6: Haloalkanes and Haloarenes
Attempt either (a) and (b), or the OR part.
  1. (a)
    Give reason for the following: During the electrophilic substitution reaction of haloarenes, para substituted derivative is the major product.
  2. (b)
    The product formed during SN1S_N1 reaction is a racemic mixture.
  3. OR (a)
    OR: Name the suitable alcohol and reagent, from which 2-Chloro-2-methylpropane can be prepared.
  4. OR (b)
    Out of the Chloromethane and Fluoromethane, which one has higher dipole moment and why?

Tests: Electrophilic substitution in haloarenes, SN1 stereochemistry, and haloalkane preparation and dipole moments.

Show solution

(a) Give reason for the following: During the electrophilic substitution reaction of haloarenes, para substituted derivative is the major product.

  1. The halogen's lone pairs (+R effect) raise the electron density at the ortho and para positions, so the electrophile goes there.
  2. The ortho positions sit next to the bulky halogen: steric hindrance makes ortho attack harder, so the para isomer is the major product.
Answero/p directing by +R; steric hindrance at ortho makes para major

(b) The product formed during SN1S_N1 reaction is a racemic mixture.

  1. In SN1S_N1 the slow step gives a carbocation, which is sp2^2 hybridised and planar.
  2. The nucleophile can attack the flat cation from either face equally: front attack keeps the configuration, back attack inverts it. Equal amounts of the two enantiomers form: a racemic mixture (from an optically active substrate).
AnswerPlanar carbocation attacked equally from both faces

OR (a) OR: Name the suitable alcohol and reagent, from which 2-Chloro-2-methylpropane can be prepared.

  1. Alcohol: 2-methylpropan-2-ol (tert-butyl alcohol), (CH3)3COH\mathrm{(CH_3)_3COH}. Reagent: concentrated HCl (Lucas reagent, conc. HCl with anhydrous ZnCl2\mathrm{ZnCl_2}).
  2. (CH3)3COH+HCl→ZnCl2(CH3)3CCl+H2O\mathrm{(CH_{3})_{3}COH} + \mathrm{HCl} \xrightarrow{\text{ZnCl2}} \mathrm{(CH_{3})_{3}CCl} + \mathrm{H_{2}O}; the tertiary alcohol reacts at once by the SN1S_N1 path.
Answer2-Methylpropan-2-ol with conc. HCl (Lucas reagent)

OR (b) Out of the Chloromethane and Fluoromethane, which one has higher dipole moment and why?

  1. Chloromethane (1.860 D) has a slightly higher dipole moment than fluoromethane (1.847 D).
  2. Dipole moment = charge separation × bond length. F is more electronegative, but the C–F bond is much shorter (F is small); the longer C–Cl bond more than makes up for chlorine's smaller charge separation.
AnswerChloromethane: the longer C–Cl bond outweighs F's higher electronegativity
Ask about this question
Q22

Question 22 (2 marks)

Chapter 5: Coordination Compounds
The formula Co(NH3)5CO3Cl\mathrm{Co(NH_3)_5CO_3Cl} could represent a carbonate or a chloride. Write the structures and names of possible isomers.

Tests: Ionisation isomerism and IUPAC names of coordination compounds.

Show solution
  1. The two differ in which anion is bonded to cobalt and which is the counter ion (ionisation isomers). In both, cobalt is +3 with five NH3\mathrm{NH_3} and one anion in the coordination sphere (coordination number 6).
  2. Chloride: [Co(NH3)5(CO3)]Cl\mathrm{[Co(NH_3)_5(CO_3)]Cl}, pentaamminecarbonatocobalt(III) chloride. Complex charge +3−2=+1+3 - 2 = +1, balanced by Cl−\mathrm{Cl^-}.
  3. Carbonate: [Co(NH3)5Cl]CO3\mathrm{[Co(NH_3)_5Cl]CO_3}, pentaamminechloridocobalt(III) carbonate. Complex charge +3−1=+2+3 - 1 = +2, balanced by CO32−\mathrm{CO_3^{2-}}.

    Why: The scheme spells the ligand 'amine'; NH₃ as a ligand is 'ammine'.

Answer[Co(NH₃)₅(CO₃)]Cl, pentaamminecarbonatocobalt(III) chloride; [Co(NH₃)₅Cl]CO₃, pentaamminechloridocobalt(III) carbonate
Ask about this question
Q23

Question 23 (2 marks)

Chapter 2: Electrochemistry
Corrosion is an electrochemical phenomenon. The oxygen in moist air reacts as follows: O2(g)+2H2O(l)+4e−→4OH−(aq)\mathrm{O_2(g) + 2H_2O(l) + 4e^- \rightarrow 4OH^-(aq)}. Write down the possible reactions for corrosion of zinc occurring at anode, cathode, and overall reaction to form a white layer of zinc hydroxide.

Tests: Corrosion as an electrochemical cell: anode, cathode and overall reactions.

Show solution
  1. Anode (oxidation): Zn(s)→Zn2+(aq)+2e−\mathrm{Zn(s) \rightarrow Zn^{2+}(aq) + 2e^-}.
  2. Cathode (reduction): O2(g)+2H2O(l)+4e−→4OH−(aq)\mathrm{O_2(g) + 2H_2O(l) + 4e^- \rightarrow 4OH^-(aq)}.
  3. Overall (anode × 2 + cathode, 4 electrons): 2Zn(s)+O2(g)+2H2O(l)→2Zn2+(aq)+4OH−(aq)\mathrm{2Zn(s) + O_2(g) + 2H_2O(l) \rightarrow 2Zn^{2+}(aq) + 4OH^-(aq)}.
  4. The ions combine to the white layer: 2Zn (s)+O2 (g)+2H2O (l)→2Zn(OH)2 (s)2\mathrm{Zn}\,\text{(s)} + \mathrm{O_{2}}\,\text{(g)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{Zn(OH)_{2}}\,\text{(s)}.
AnswerAnode Zn → Zn²⁺ + 2e⁻; cathode O₂ + 2H₂O + 4e⁻ → 4OH⁻; overall 2Zn + O₂ + 2H₂O → 2Zn(OH)₂
Ask about this question
Q24

Question 24 (2 marks)

Chapter 3: Chemical Kinetics
Explain how and why will the rate of reaction for a given reaction be affected when
  1. (a)
    a catalyst is added
  2. (b)
    the temperature at which the reaction was taking place is decreased

Tests: Effect of a catalyst and of temperature on reaction rate.

Show solution

(a) a catalyst is added

  1. The rate increases. A catalyst gives the reaction a new path with a lower activation energy, so many more collisions have enough energy to react. (It does not change ΔH or the equilibrium position.)
AnswerRate increases: lower activation energy

(b) the temperature at which the reaction was taking place is decreased

  1. The rate decreases. At a lower temperature the molecules have less kinetic energy: they collide less often, and, more importantly, a much smaller fraction of collisions has energy at least equal to Ea.
  2. By the Arrhenius equation, k=A e−Ea/RTk = A\,e^{-E_a/RT} falls as TT falls; for many reactions the rate roughly halves for every 10 K drop.
AnswerRate decreases: fewer molecules have energy ≥ Ea
Ask about this question
Q25

Question 25 (2 marks)

Chapter 7: Alcohols, Phenols and Ethers
Write the reaction and IUPAC name of the product formed when 2-Methylpropanal (isobutyraldehyde) is treated with ethyl magnesium bromide followed by hydrolysis.

Tests: Preparation of alcohols from aldehydes and Grignard reagents.

Show solution
  1. The ethyl group of the Grignard reagent adds to the carbonyl carbon: (CH3)2CHCHO+C2H5MgBr→dry ether(CH3)2CHCH(OMgBr)C2H5\mathrm{(CH_{3})_{2}CHCHO} + \mathrm{C_{2}H_{5}MgBr} \xrightarrow{\text{dry ether}} \mathrm{(CH_{3})_{2}CHCH(OMgBr)C_{2}H_{5}}.
  2. Hydrolysis gives a secondary alcohol: (CH3)2CHCH(OMgBr)C2H5+H2O→H+(CH3)2CHCH(OH)C2H5+Mg(OH)Br\mathrm{(CH_{3})_{2}CHCH(OMgBr)C_{2}H_{5}} + \mathrm{H_{2}O} \xrightarrow{\text{H+}} \mathrm{(CH_{3})_{2}CHCH(OH)C_{2}H_{5}} + \mathrm{Mg(OH)Br}.
  3. Name: CH3−CH(CH3)−CH(OH)−CH2−CH3\mathrm{CH_3{-}CH(CH_3){-}CH(OH){-}CH_2{-}CH_3} has a five-carbon chain, numbered so the OH gets the lowest number (3, from either end) and then the methyl (2): 2-methylpentan-3-ol.
Answer(CH₃)₂CHCH(OH)C₂H₅, 2-methylpentan-3-ol
Ask about this question

Section C: 5 short answer questions carrying 3 marks each, with internal choice in two questions

Q26

Question 26 (3 marks)

Chapter 7: Alcohols, Phenols and Ethers
Write the equations for the following reaction:
  1. (a)
    Salicylic acid is treated with acetic anhydride in the presence of conc. H2SO4\mathrm{H_{2}SO_{4}}
  2. (b)
    Tert butyl chloride is treated with sodium ethoxide.
  3. (c)
    Phenol is treated with chloroform in the presence of NaOH

Tests: Reactions of phenols (acetylation, Reimer–Tiemann) and why tertiary halides eliminate with alkoxides.

Show solution

(a) Salicylic acid is treated with acetic anhydride in the presence of conc. H2SO4\mathrm{H_{2}SO_{4}}

  1. The phenolic –OH is acetylated: HOC6H4COOH+(CH3CO)2O→conc. H2SO4CH3COOC6H4COOH+CH3COOH\mathrm{HOC_{6}H_{4}COOH} + \mathrm{(CH_{3}CO)_{2}O} \xrightarrow{\text{conc. H2SO4}} \mathrm{CH_{3}COOC_{6}H_{4}COOH} + \mathrm{CH_{3}COOH}.
  2. Product: acetylsalicylic acid (aspirin), a benzene ring with –COOH and, on the next carbon, –OCOCH₃.
AnswerAcetylsalicylic acid (aspirin) + acetic acid

(b) Tert butyl chloride is treated with sodium ethoxide.

  1. Ethoxide is a strong base, and the tertiary carbon is too crowded for SN2S_N2, so elimination wins (no Williamson ether forms): (CH3)3CCl+C2H5ONa→(CH3)2C=CH2+C2H5OH+NaCl\mathrm{(CH_3)_3CCl + C_2H_5ONa \rightarrow (CH_3)_2C{=}CH_2 + C_2H_5OH + NaCl}.
  2. Product: 2-methylpropene.
Answer2-Methylpropene, (CH₃)₂C=CH₂ (elimination)

(c) Phenol is treated with chloroform in the presence of NaOH

  1. Reimer–Tiemann reaction: a –CHO group goes onto the ring ortho to –OH.
  2. C6H5OH+CHCl3+4NaOH→NaOC6H4CHO+3NaCl+3H2O\mathrm{C_{6}H_{5}OH} + \mathrm{CHCl_{3}} + 4\mathrm{NaOH} \rightarrow \mathrm{NaOC_{6}H_{4}CHO} + 3\mathrm{NaCl} + 3\mathrm{H_{2}O}, then acid: NaOC6H4CHO+HCl→HOC6H4CHO+NaCl\mathrm{NaOC_{6}H_{4}CHO} + \mathrm{HCl} \rightarrow \mathrm{HOC_{6}H_{4}CHO} + \mathrm{NaCl}.
  3. Product: salicylaldehyde (2-hydroxybenzaldehyde).
Answer2-Hydroxybenzaldehyde (salicylaldehyde)
Ask about this question
Q27

Question 27 (3 marks)

Chapter 5: Coordination Compounds
Using Valence bond theory, explain the following in relation to the paramagnetic complex [Mn(CN)6]3−\mathrm{[Mn(CN)_6]^{3-}}
  1. (a)
    type of hybridization
  2. (b)
    magnetic moment value
  3. (c)
    type of complex – inner, outer orbital complex

Tests: Valence bond description of an octahedral complex: hybridisation, magnetic moment and inner/outer orbital type.

Show solution

(a) type of hybridization

  1. Mn is [Ar]3d54s2\mathrm{[Ar]3d^54s^2}; in the complex it is Mn3+\mathrm{Mn^{3+}}, 3d4\mathrm{3d^4} (four unpaired electrons in four of the five 3d orbitals).
  2. CN−\mathrm{CN^-} is a strong-field ligand: it pairs two of the electrons, leaving the 3d orbitals as one pair and two singles (boxes: ↑↓, ↑, ↑, empty, empty).
  3. The two empty inner 3d orbitals, the 4s and the three 4p orbitals take the six CN−\mathrm{CN^-} lone pairs: d2sp3d^2sp^3 hybridisation, octahedral.
Answerd²sp³ (octahedral)

(b) magnetic moment value

  1. Two unpaired electrons remain: μ=n(n+2)=2×4=8=2.83\mu = \sqrt{n(n+2)} = \sqrt{2 \times 4} = \sqrt{8} = 2.83 BM. (Paramagnetic, as the question says.)

    Why: The scheme prints 2.87 BM; √8 is 2.83.

Answerμ = √8 ≈ 2.83 BM

(c) type of complex – inner, outer orbital complex

  1. Inner orbital (low spin) complex: the hybridisation uses the inner (n−1)d orbitals, 3d, not the outer 4d.
AnswerInner orbital (low spin) complex
Ask about this question
Q28

Question 28 (3 marks)

Chapter 1: Solutions
Answer the following questions:
  1. (a)
    State Henry’s law and explain why are the tanks used by scuba divers filled with air diluted with helium (11.7% helium, 56.2% nitrogen and 32.1% oxygen)?
  2. (b)
    Assume that argon exerts a partial pressure of 6 bar. Calculate the solubility of argon gas in water. (Given Henry’s law constant for argon dissolved in water, KH=40K_H = 40 kbar)

Tests: Henry's law and its applications.

Show solution

(a) State Henry’s law and explain why are the tanks used by scuba divers filled with air diluted with helium (11.7% helium, 56.2% nitrogen and 32.1% oxygen)?

  1. Henry's law: the partial pressure of a gas in the vapour phase (pp) is proportional to its mole fraction (xx) in the solution: p=KH xp = K_H\,x. (Equivalently, the solubility of a gas is proportional to its pressure over the liquid.)
  2. Under water the pressure is high, so more nitrogen dissolves in the diver's blood. On coming up, the pressure falls, the nitrogen comes out as bubbles in the blood and blocks capillaries: the bends, which are painful and dangerous.
  3. Diluting the air with helium, which is much less soluble in blood, lowers the amount of nitrogen that dissolves, so the bends (and nitrogen narcosis) are avoided.
Answerp = K_H x; helium (poorly soluble) replaces part of the nitrogen to prevent the bends

(b) Assume that argon exerts a partial pressure of 6 bar. Calculate the solubility of argon gas in water. (Given Henry’s law constant for argon dissolved in water, KH=40K_H = 40 kbar)

  1. p=KH xp = K_H\,x, so x=pKH=6 bar40×103 bar=1.5×10−4x = \dfrac{p}{K_H} = \dfrac{6\ \text{bar}}{40 \times 10^3\ \text{bar}} = 1.5 \times 10^{-4}.
AnswerMole fraction of argon x = 1.5 × 10⁻⁴
Ask about this question
Q29

Question 29 (3 marks)

Chapter 9: Amines
Give reasons for any 3 of the following observations:
  1. (a)
    Aniline is acetylated before nitration reaction.
  2. (b)
    pKb\mathrm{pK_b} of aniline is lower than the m-nitroaniline.
  3. (c)
    Primary amine on treatment with benzenesulphonyl chloride forms a product which is soluble in NaOH however secondary amine gives product which is insoluble in NaOH.
  4. (d)
    Aniline does not react with methyl chloride in the presence of anhydrous AlCl3\mathrm{AlCl_{3}} catalyst.

Tests: Reactivity and basicity of aromatic amines; the Hinsberg test.

Show solution

(a) Aniline is acetylated before nitration reaction.

  1. Direct nitration of aniline fails: nitric acid oxidises the very reactive ring to tarry products, and in the acid aniline becomes the anilinium ion (meta directing), giving much m-nitroaniline.
  2. Acetylation to acetanilide (–NHCOCH₃) protects the amino group and tones down its activating effect; nitration then gives mainly the p-nitro product, and hydrolysis gives back p-nitroaniline.
AnswerTo protect –NH₂ from oxidation and protonation, and get the p-nitro product

(b) pKb\mathrm{pK_b} of aniline is lower than the m-nitroaniline.

  1. A lower pKb\mathrm{pK_b} means a stronger base. –NO2\mathrm{NO_2} is strongly electron withdrawing (–I; at the meta position mainly by induction), so it pulls electron density away from the N lone pair of m-nitroaniline and makes it less available for a proton. Aniline is the stronger base, so its pKb\mathrm{pK_b} (9.38) is lower than that of m-nitroaniline (about 11.5).
Answer–NO₂ withdraws electrons and weakens the base, so m-nitroaniline has the higher pKb

(c) Primary amine on treatment with benzenesulphonyl chloride forms a product which is soluble in NaOH however secondary amine gives product which is insoluble in NaOH.

  1. A primary amine gives an N-alkylbenzenesulphonamide, C6H5SO2NHR\mathrm{C_6H_5SO_2NHR}. Its N–H is acidic (the strongly electron-withdrawing sulphonyl group stabilises the anion), so it dissolves in NaOH as the sodium salt.
  2. A secondary amine gives C6H5SO2NR2\mathrm{C_6H_5SO_2NR_2}, which has no H on nitrogen, so it is not acidic and does not dissolve in alkali.
AnswerThe 1° product has an acidic N–H; the 2° product has none

(d) Aniline does not react with methyl chloride in the presence of anhydrous AlCl3\mathrm{AlCl_{3}} catalyst.

  1. Aniline is a Lewis base and AlCl3\mathrm{AlCl_3} a Lewis acid: they form a salt, C6H5NH2→AlCl3\mathrm{C_6H_5NH_2{\to}AlCl_3}. The nitrogen now carries a positive charge, which strongly deactivates the ring, so Friedel–Crafts alkylation does not take place.
AnswerAniline forms a salt with AlCl₃; the positive N deactivates the ring
Ask about this question
Q30

Question 30 (3 marks)

Chapter 6: Haloalkanes and Haloarenes
Attempt either (a) and (b), or the OR part.
  1. (a)
    Identify the major product formed when 2-cyclohexylchloroethane undergoes a dehydrohalogenation reaction. Name the reagent which is used to carry out the reaction.
  2. (b)
    Why are haloalkanes more reactive towards nucleophilic substitution reactions than haloarenes and vinylic halides?
  3. OR (a)
    OR: Name the possible alkenes which will yield 1-chloro-1-methylcyclohexane on their reaction with HCl. Write the reactions involved.
  4. OR (b)
    Allyl chloride is hydrolysed more readily than n-propyl chloride. Why?

Tests: Elimination (dehydrohalogenation), Markovnikov addition, and reactivity of haloalkanes, haloarenes and allylic halides.

Show solution

(a) Identify the major product formed when 2-cyclohexylchloroethane undergoes a dehydrohalogenation reaction. Name the reagent which is used to carry out the reaction.

  1. 2-Cyclohexylchloroethane is C6H11−CH2−CH2Cl\mathrm{C_6H_{11}{-}CH_2{-}CH_2Cl}. The only β-hydrogens are on the CH2\mathrm{CH_2} next to the ring.
  2. Alcoholic (ethanolic) KOH removes HCl: C6H11CH2CH2Cl+KOH→ethanol, ΔC6H11CH=CH2+KCl+H2O\mathrm{C_6H_{11}CH_2CH_2Cl + KOH \xrightarrow{ethanol,\ \Delta} C_6H_{11}CH{=}CH_2 + KCl + H_2O}.
  3. Product: cyclohexylethene (vinylcyclohexane), a cyclohexane ring carrying –CH=CH₂.
AnswerCyclohexylethene (vinylcyclohexane); alcoholic KOH

(b) Why are haloalkanes more reactive towards nucleophilic substitution reactions than haloarenes and vinylic halides?

  1. In haloarenes and vinylic halides a lone pair on the halogen is in resonance with the ring or the C=C, giving the C–X bond partial double-bond character: it is shorter and stronger, hard to break.
  2. The carbon is also sp2^2 (more electronegative, holds the bond tighter), the phenyl or vinyl cation is unstable, and the π-electron cloud repels the incoming nucleophile. A haloalkane has none of these, so it reacts much faster.
AnswerPartial double-bond character of C–X in aryl and vinyl halides

OR (a) OR: Name the possible alkenes which will yield 1-chloro-1-methylcyclohexane on their reaction with HCl. Write the reactions involved.

  1. The Cl must end up on the ring carbon that carries the CH₃. By Markovnikov's rule H adds to the carbon with more H, Cl to the other (via the tertiary carbocation).
  2. 1-Methylcyclohexene (C=C in the ring at C-1): C7H12+HCl→C7H13Cl\mathrm{C_7H_{12} + HCl \rightarrow C_7H_{13}Cl}, the H+\mathrm{H^+} adding to C-2.
  3. Methylenecyclohexane (ring carbon =CH2\mathrm{{=}CH_2}): C6H10=CH2+HCl→\mathrm{C_6H_{10}{=}CH_2 + HCl \rightarrow} 1-chloro-1-methylcyclohexane, the H+\mathrm{H^+} adding to the CH2\mathrm{CH_2}.
Answer1-Methylcyclohexene and methylenecyclohexane

OR (b) Allyl chloride is hydrolysed more readily than n-propyl chloride. Why?

  1. Allyl chloride ionises to the allyl carbocation CH2=CH−CH2+\mathrm{CH_2{=}CH{-}CH_2^+}, stabilised by resonance (the charge is shared by both end carbons, +CH2−CH=CH2\mathrm{{}^+CH_2{-}CH{=}CH_2}).
  2. The n-propyl carbocation is primary with no resonance: it hardly forms. So allyl chloride is hydrolysed much faster.
AnswerThe allyl carbocation is resonance-stabilised; the n-propyl cation is not
Ask about this question

Section D: 2 case-based questions carrying 4 (1+1+2) marks each, each with an internal choice

Q31

Question 31 (4 marks)

Chapter 10: Biomolecules
Strengthening the Foundation: Chargaff Formulates His "Rules". Many people believe that James Watson and Francis Crick discovered DNA in the 1950s. In reality, this is not the case. Rather, DNA was first identified in the late 1860s by Swiss chemist Friedrich Miescher. Then, in the decades following Miescher's discovery, other scientists--notably, Phoebus Levene and Erwin Chargaff--carried out a series of research efforts that revealed additional details about the DNA molecule, including its primary chemical components and the ways in which they joined with one another. Without the scientific foundation provided by these pioneers, Watson and Crick may never have reached their groundbreaking conclusion of 1953: that the DNA molecule exists in the form of a three-dimensional double helix. Chargaff, an Austrian biochemist, as his first step in this DNA research, set out to see whether there were any differences in DNA among different species. After developing a new paper chromatography method for separating and identifying small amounts of organic material, Chargaff reached two major conclusions: (i) the nucleotide composition of DNA varies among species. (ii) Almost all DNA, no matter what organism or tissue type it comes from maintains certain properties, even as its composition varies. In particular, the amount of adenine (A) is similar to the amount of thymine (T), and the amount of guanine (G) approximates the amount of cytosine (C). In other words, the total amount of purines (A + G) and the total amount of pyrimidines (C + T) are usually nearly equal. This conclusion is now known as "Chargaff's rule." Chargaff’s rule is not obeyed in some viruses. These either have single- stranded DNA or RNA as their genetic material.
  1. (a)
    A segment of DNA has 100 adenine and 150 cytosine bases. What is the total number of nucleotides present in this segment of DNA?
  2. (b)
    A sample of hair and blood was found at two sites. Scientists claim that the samples belong to same species. How did the scientists arrive at this conclusion?
  3. (c)
    The sample of a virus was tested and it was found to contain 20% adenine, 20% thymine, 20% guanine and the rest cytosine. Is the genetic material of this virus (a) DNA- double helix (b) DNA-single helix (c) RNA? What do you infer from this data?
  4. (c) OR
    OR: How can Chargaff’s rule be used to infer that the genetic material of an organism is double- helix or single- helix?

Tests: Nucleic acids: base pairing in DNA and Chargaff's rule.

Show solution

(a) A segment of DNA has 100 adenine and 150 cytosine bases. What is the total number of nucleotides present in this segment of DNA?

  1. Chargaff's rule (base pairing in the double helix): A = T and G = C. So T = 100 and G = 150.
  2. Each nucleotide carries one base: total = 100 + 100 + 150 + 150 = 500 nucleotides.
Answer500 nucleotides

(b) A sample of hair and blood was found at two sites. Scientists claim that the samples belong to same species. How did the scientists arrive at this conclusion?

  1. By Chargaff's first conclusion, the nucleotide (base) composition of DNA differs between species but is the same for all tissues of one species. They studied the base composition of the DNA in the hair and the blood; it was the same, so the samples belong to the same species.
AnswerSame nucleotide (base) composition of their DNA

(c) The sample of a virus was tested and it was found to contain 20% adenine, 20% thymine, 20% guanine and the rest cytosine. Is the genetic material of this virus (a) DNA- double helix (b) DNA-single helix (c) RNA? What do you infer from this data?

  1. Cytosine = 100 − 20 − 20 − 20 = 40%.
  2. Thymine is present (and no uracil), so it is DNA, not RNA.
  3. A = T (20% each) but G (20%) ≠ C (40%); purines A + G = 40% and pyrimidines C + T = 60% are not equal. Chargaff's rule fails, so the bases are not paired: the DNA is not a double helix.
  4. So the virus has single-stranded (single helix) DNA, option (b).
Answer(b) DNA, single helix (single-stranded): T present, but G ≠ C

(c) OR OR: How can Chargaff’s rule be used to infer that the genetic material of an organism is double- helix or single- helix?

  1. In a double helix every A pairs with T and every G with C, so the amounts must be equal: A = T, G = C, and purines (A + G) = pyrimidines (C + T).
  2. Measure the base composition. If A = T and G = C, the DNA is double-stranded; if they are not equal, the bases are not all paired and the DNA is single-stranded.
AnswerA = T and G = C means double helix; otherwise single-stranded
Ask about this question
Q32

Question 32 (4 marks)

Chapter 1: Solutions
Henna is investigating the melting point of different salt solutions. She makes a salt solution using 10 mL of water with a known mass of NaCl salt. She puts the salt solution into a freezer and leaves it to freeze. She takes the frozen salt solution out of the freezer and measures the temperature when the frozen salt solution melts. She repeats each experiment. (Table shown with part (a).) Assuming the melting point of pure water as 0 °C, answer the following questions:
  1. (a)
    One temperature in the second set of results does not fit the pattern. Which temperature is that? Justify your answer.
    S.NoMass of the salt used in gMelting point in °C, Readings Set 1Melting point in °C, Reading Set 2
    10.3−1.9−1.9
    20.4−2.5−2.6
    30.5−3.0−5.5
    40.6−3.8−3.8
    50.8−5.1−5.0
    61.0−6.4−6.3
  2. (b)
    Why did Henna collect two sets of results?
  3. (c)
    In place of NaCl, if Henna had used glucose, what would have been the melting point of the solution with 0.6 g glucose in it?
  4. (c) OR
    OR: What is the predicted melting point if 1.2 g of salt is added to 10 mL of water? Justify your answer.

Tests: Depression in freezing point: proportionality to molality and the van 't Hoff factor.

Show solution

(a) One temperature in the second set of results does not fit the pattern. Which temperature is that? Justify your answer.

  1. The melting point of the frozen solution is its freezing point. The depression in freezing point is proportional to molality, i.e. to the mass of salt in the same 10 mL of water: more salt, lower melting point, about 6.3 °C lower per gram.
  2. Reading 3 of set 2, −5.5 °C for 0.5 g, breaks the pattern: it is lower than the value for 0.6 g (−3.8 °C) and even for 0.8 g. It should be about −3.0 to −3.2 °C, like set 1's −3.0 °C.
Answer−5.5 °C (0.5 g, set 2): it should lie between −2.6 and −3.8 °C

(b) Why did Henna collect two sets of results?

  1. Repeating each measurement checks the results: it shows up a mistake (like the −5.5 °C reading), avoids errors in data collection and makes the data more reliable and objective; the two readings can be averaged.
AnswerTo check for errors and make the data reliable

(c) In place of NaCl, if Henna had used glucose, what would have been the melting point of the solution with 0.6 g glucose in it?

  1. ΔTf=i Kf m\Delta T_f = i\,K_f\,m. For 0.6 g NaCl (i=2i = 2, M=58.5M = 58.5) in 10 g water: 3.8=2×Kf×0.6×100058.5×103.8 = 2 \times K_f \times \dfrac{0.6 \times 1000}{58.5 \times 10}.
  2. For 0.6 g glucose (i=1i = 1, M=180M = 180): ΔTf=1×Kf×0.6×1000180×10\Delta T_f = 1 \times K_f \times \dfrac{0.6 \times 1000}{180 \times 10}.
  3. Dividing: ΔTf(glucose)3.8=58.52×180\dfrac{\Delta T_f(\text{glucose})}{3.8} = \dfrac{58.5}{2 \times 180}, so ΔTf=3.8×58.5360=0.62\Delta T_f = \dfrac{3.8 \times 58.5}{360} = 0.62 °C.

    Why: The data give K_f = 1.85 K kg/mol, close to water's 1.86.

  4. Melting point = 0 − 0.62 = −0.62 °C.
AnswerAbout −0.62 °C

(c) OR OR: What is the predicted melting point if 1.2 g of salt is added to 10 mL of water? Justify your answer.

  1. The depression in freezing point is directly proportional to molality, i.e. to the mass of salt when the amount of water is the same.
  2. 0.3 g gives 1.9 °C and 0.6 g gives 3.8 °C: doubling the mass doubles the depression. 1.2 g is twice 0.6 g, so the depression is 2 × 3.8 = 7.6 °C.
  3. Predicted melting point = 0 − 7.6 = −7.6 °C. (Scaling 1.0 g's −6.4 °C by 1.2 gives the same, −7.7 °C.)

    Why: The scheme stops at the depression, 7.6 °C; the melting point is −7.6 °C.

Answer−7.6 °C (depression 7.6 °C)
Ask about this question

Section E: 3 long answer questions carrying 5 marks each; two have an internal choice

Q33

Question 33 (5 marks)

Chapter 2: Electrochemistry
Attempt either (a), (b) and (c), or the OR part.
  1. (a)
    Why does the cell voltage of a mercury cell remain constant during its lifetime?
  2. (b)
    Write the reaction occurring at anode and cathode and the products of electrolysis of aq KCl.
  3. (c)
    What is the pH of HCl solution when the hydrogen gas electrode shows a potential of −0.59 V at standard temperature and pressure?
  4. OR (a)
    OR: Molar conductivity of substance “A” is 5.9×10³ S/m and “B” is 1 × 10⁻¹⁶ S/m. Which of the two is most likely to be copper metal and why?
  5. OR (b)
    What is the quantity of electricity in Coulombs required to produce 4.8 g of Mg from molten MgCl2\mathrm{MgCl_{2}}? How much Ca will be produced if the same amount of electricity was passed through molten CaCl2\mathrm{CaCl_{2}}? (Atomic mass of Mg = 24 u, atomic mass of Ca = 40 u).
  6. OR (c)
    What is the standard free energy change for the following reaction at room temperature? Is the reaction spontaneous? Sn(s)+2Cu2+(aq)→Sn2+(aq)+2Cu+(s)\mathrm{Sn(s) + 2Cu^{2+}(aq) \rightarrow Sn^{2+}(aq) + 2Cu^+(s)}

Tests: Batteries, electrolysis products, the Nernst equation, Faraday's laws and ΔG° = −nFE°.

Show solution

(a) Why does the cell voltage of a mercury cell remain constant during its lifetime?

  1. The cell reaction, Zn(Hg)+HgO(s)→ZnO(s)+Hg(l)\mathrm{Zn(Hg) + HgO(s) \rightarrow ZnO(s) + Hg(l)}, involves only solids and a liquid; no ion in solution changes concentration as the cell works.
  2. The Nernst equation has no concentration term that changes, so the voltage stays at about 1.35 V throughout its life.
AnswerThe overall reaction involves no ion whose concentration changes

(b) Write the reaction occurring at anode and cathode and the products of electrolysis of aq KCl.

  1. KCl(aq)→K+(aq)+Cl−(aq)\mathrm{KCl(aq) \rightarrow K^+(aq) + Cl^-(aq)}. At the cathode water is reduced in preference to K+\mathrm{K^+} (far more negative E∘E^\circ): H2O(l)+e−→12H2(g)+OH−(aq)\mathrm{H_2O(l) + e^- \rightarrow \tfrac{1}{2}H_2(g) + OH^-(aq)}.
  2. At the anode chloride is oxidised (overpotential makes O2\mathrm{O_2} from water slower): Cl−(aq)→12Cl2(g)+e−\mathrm{Cl^-(aq) \rightarrow \tfrac{1}{2}Cl_2(g) + e^-}.
  3. Overall: 2KCl (aq)+2H2O (l)→2KOH (aq)+H2 (g)+Cl2 (g)2\mathrm{KCl}\,\text{(aq)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{KOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)} + \mathrm{Cl_{2}}\,\text{(g)}. Products: hydrogen at the cathode, chlorine at the anode, and KOH in the solution.
AnswerH₂ at cathode, Cl₂ at anode, KOH in solution

(c) What is the pH of HCl solution when the hydrogen gas electrode shows a potential of −0.59 V at standard temperature and pressure?

  1. Electrode reaction: H++e−→12H2\mathrm{H^+ + e^- \rightarrow \tfrac{1}{2}H_2}, n=1n = 1, E∘=0E^\circ = 0, pH2=1p_{\mathrm{H_2}} = 1 bar.
  2. Nernst: E=E∘−0.0591log⁡(pH2)1/2[H+]=0.059log⁡[H+]=−0.059 pHE = E^\circ - \dfrac{0.059}{1}\log\dfrac{(p_{\mathrm{H_2}})^{1/2}}{[\mathrm{H^+}]} = 0.059\log[\mathrm{H^+}] = -0.059\,\mathrm{pH}.
  3. −0.59=−0.059 pH-0.59 = -0.059\,\mathrm{pH}, so pH=0.590.059=10\mathrm{pH} = \dfrac{0.59}{0.059} = 10.
AnswerpH = 10

OR (a) OR: Molar conductivity of substance “A” is 5.9×10³ S/m and “B” is 1 × 10⁻¹⁶ S/m. Which of the two is most likely to be copper metal and why?

  1. A. Metals conduct electricity through free (delocalised) electrons and have very high conductivity; B's tiny value is that of an insulator (like glass).
  2. (The unit S/m is that of conductivity, not molar conductivity. Copper's measured conductivity is about 6 × 10⁷ S/m; either way it is enormously larger than B's.)
AnswerA: metals like copper have very high conductivity

OR (b) What is the quantity of electricity in Coulombs required to produce 4.8 g of Mg from molten MgCl2\mathrm{MgCl_{2}}? How much Ca will be produced if the same amount of electricity was passed through molten CaCl2\mathrm{CaCl_{2}}? (Atomic mass of Mg = 24 u, atomic mass of Ca = 40 u).

  1. Mg2++2e−→Mg\mathrm{Mg^{2+} + 2e^- \rightarrow Mg}: 24 g of Mg needs 2 F. 4.8 g is 0.2 mol, so it needs 2×0.2=0.42 \times 0.2 = 0.4 F =0.4×96500=38600= 0.4 \times 96500 = 38600 C.
  2. Ca2++2e−→Ca\mathrm{Ca^{2+} + 2e^- \rightarrow Ca}: 2 F give 40 g, so 0.4 F give 0.2×40=80.2 \times 40 = 8 g of Ca.

    Why: Same charge, same moles of a 2+ metal: 0.2 mol.

Answer38600 C (0.4 F); 8 g of Ca

OR (c) What is the standard free energy change for the following reaction at room temperature? Is the reaction spontaneous? Sn(s)+2Cu2+(aq)→Sn2+(aq)+2Cu+(s)\mathrm{Sn(s) + 2Cu^{2+}(aq) \rightarrow Sn^{2+}(aq) + 2Cu^+(s)}

  1. The paper gives no potentials; the scheme uses E∘(Sn2+/Sn)=−0.14E^\circ(\mathrm{Sn^{2+}/Sn}) = -0.14 V and E∘(Cu2+/Cu+)=+0.15E^\circ(\mathrm{Cu^{2+}/Cu^+}) = +0.15 V. (Cu+\mathrm{Cu^+} is an ion in solution; the paper's "(s)" is a slip.)
  2. Sn is oxidised (anode), Cu2+\mathrm{Cu^{2+}} is reduced to Cu+\mathrm{Cu^+} (cathode): Ecell∘=0.15−(−0.14)=0.29E^\circ_\text{cell} = 0.15 - (-0.14) = 0.29 V, with n=2n = 2.
  3. ΔG∘=−nFEcell∘=−2×96500×0.29=−55970\Delta G^\circ = -nFE^\circ_\text{cell} = -2 \times 96500 \times 0.29 = -55970 J/mol =−55.97= -55.97 kJ/mol.

    Why: The scheme prints 55970 J/mol without the minus sign; ΔG° is negative.

  4. ΔG° is negative (E°cell positive), so the reaction is spontaneous.
AnswerΔG° = −55970 J/mol (−55.97 kJ/mol); spontaneous
Ask about this question
Q34

Question 34 (5 marks)

Chapter 8: Aldehydes, Ketones and Carboxylic Acids
Attempt either the first question or the OR question.
  1. (a)
    A hydrocarbon (A) with molecular formula C5H10\mathrm{C_{5}H_{10}} on ozonolysis gives two products (B) and (C). Both (B) and (C) give a yellow precipitate when heated with iodine in presence of NaOH while only (B) give a silver mirror on reaction with Tollens’ reagent. (a) Identify (A), (B) and (C).
  2. (b)
    Write the reaction of B with Tollens’ reagent
  3. (c)
    Write the equation for iodoform test for C
  4. (d)
    Write down the equation for aldol condensation reaction of B and C.
  5. OR (a)
    OR: An organic compound (A) with molecular formula C2Cl3O2H\mathrm{C_{2}Cl_{3}O_{2}H} is obtained when (B) reacts with Red P and Cl2\mathrm{Cl_{2}}. The organic compound (B) can be obtained on the reaction of methyl magnesium chloride with dry ice followed by acid hydrolysis. (a) Identify A and B
  6. OR (b)
    Write down the reaction for the formation of A from B. What is this reaction called?
  7. OR (c)
    Give any one method by which organic compound B can be prepared from its corresponding acid chloride.
  8. OR (d)
    Which will be the more acidic compound (A) or (B)? Why?
  9. OR (e)
    Write down the reaction to prepare methane from the compound (B).

Tests: Identifying carbonyl compounds by tests; aldol, iodoform, HVZ and decarboxylation reactions; acidity of haloacids.

Show solution

(a) A hydrocarbon (A) with molecular formula C5H10\mathrm{C_{5}H_{10}} on ozonolysis gives two products (B) and (C). Both (B) and (C) give a yellow precipitate when heated with iodine in presence of NaOH while only (B) give a silver mirror on reaction with Tollens’ reagent. (a) Identify (A), (B) and (C).

  1. Iodoform test: B and C both have CH3CO−\mathrm{CH_3CO{-}}. B reduces Tollens' reagent, so it is an aldehyde with CH3CO−\mathrm{CH_3CO{-}}: only ethanal, CH3CHO\mathrm{CH_3CHO}. C does not: a methyl ketone.
  2. A has 5 carbons and B has 2, so C has 3: propanone, CH3COCH3\mathrm{CH_3COCH_3}.
  3. Joining the two carbonyl carbons by a C=C gives A: (CH3)2C=CHCH3\mathrm{(CH_3)_2C{=}CHCH_3}, 2-methylbut-2-ene: (CH3)2C=CHCH3→(i) O3, (ii) Zn/H2O(CH3)2C=O+CH3CHO\mathrm{(CH_3)_2C{=}CHCH_3 \xrightarrow{(i)\ O_3,\ (ii)\ Zn/H_2O} (CH_3)_2C{=}O + CH_3CHO}.
AnswerA = 2-methylbut-2-ene, (CH₃)₂C=CHCH₃; B = ethanal, CH₃CHO; C = propanone, CH₃COCH₃

(b) Write the reaction of B with Tollens’ reagent

  1. CH3CHO+2[Ag(NH3)2]++3OH−→CH3COO−+2Ag+4NH3+2H2O\mathrm{CH_3CHO + 2[Ag(NH_3)_2]^+ + 3OH^- \rightarrow CH_3COO^- + 2Ag + 4NH_3 + 2H_2O}: a silver mirror forms.

    Why: The scheme writes one Ag and one NH₃; the balanced equation needs 2 Ag, 3 OH⁻ and 4 NH₃.

AnswerCH₃CHO + 2[Ag(NH₃)₂]⁺ + 3OH⁻ → CH₃COO⁻ + 2Ag + 4NH₃ + 2H₂O

(c) Write the equation for iodoform test for C

  1. CH3COCH3+3I2+4NaOH→CHI3+CH3COONa+3NaI+3H2O\mathrm{CH_{3}COCH_{3}} + 3\mathrm{I_{2}} + 4\mathrm{NaOH} \rightarrow \mathrm{CHI_{3}} + \mathrm{CH_{3}COONa} + 3\mathrm{NaI} + 3\mathrm{H_{2}O}: yellow iodoform, CHI₃.
AnswerCH₃COCH₃ + 3I₂ + 4NaOH → CHI₃ + CH₃COONa + 3NaI + 3H₂O

(d) Write down the equation for aldol condensation reaction of B and C.

  1. With dilute alkali (Ba(OH)2\mathrm{Ba(OH)_2} or dil. NaOH) a mixture of ethanal and propanone gives a crossed aldol: both have α-H, so four β-hydroxy carbonyl compounds form: CH3CH(OH)CH2CHO\mathrm{CH_3CH(OH)CH_2CHO} (ethanal + ethanal), (CH3)2C(OH)CH2COCH3\mathrm{(CH_3)_2C(OH)CH_2COCH_3} (propanone + propanone), CH3CH(OH)CH2COCH3\mathrm{CH_3CH(OH)CH_2COCH_3} (propanone's CH2−\mathrm{CH_2^-} adding to ethanal) and (CH3)2C(OH)CH2CHO\mathrm{(CH_3)_2C(OH)CH_2CHO} (ethanal's CH2−\mathrm{CH_2^-} adding to propanone).
  2. On heating each loses water: CH3CH=CHCHO\mathrm{CH_3CH{=}CHCHO} (but-2-enal), (CH3)2C=CHCOCH3\mathrm{(CH_3)_2C{=}CHCOCH_3} (4-methylpent-3-en-2-one), CH3CH=CHCOCH3\mathrm{CH_3CH{=}CHCOCH_3} (pent-3-en-2-one) and (CH3)2C=CHCHO\mathrm{(CH_3)_2C{=}CHCHO} (3-methylbut-2-enal).
AnswerFour aldols, which dehydrate to CH₃CH=CHCHO, (CH₃)₂C=CHCOCH₃, CH₃CH=CHCOCH₃ and (CH₃)₂C=CHCHO

OR (a) OR: An organic compound (A) with molecular formula C2Cl3O2H\mathrm{C_{2}Cl_{3}O_{2}H} is obtained when (B) reacts with Red P and Cl2\mathrm{Cl_{2}}. The organic compound (B) can be obtained on the reaction of methyl magnesium chloride with dry ice followed by acid hydrolysis. (a) Identify A and B

  1. B: a Grignard reagent with CO₂ gives a carboxylic acid with one more carbon: CH3MgCl+CO2→CH3COOMgCl\mathrm{CH_{3}MgCl} + \mathrm{CO_{2}} \rightarrow \mathrm{CH_{3}COOMgCl}, CH3COOMgCl+H2O→H+CH3COOH+Mg(OH)Cl\mathrm{CH_{3}COOMgCl} + \mathrm{H_{2}O} \xrightarrow{\text{H+}} \mathrm{CH_{3}COOH} + \mathrm{Mg(OH)Cl}. B is ethanoic acid.
  2. A, C2HCl3O2\mathrm{C_2HCl_3O_2}, is B with all three α-hydrogens replaced by Cl: trichloroacetic acid, CCl3COOH\mathrm{CCl_3COOH}.
AnswerA = CCl₃COOH (trichloroethanoic acid), B = CH₃COOH (ethanoic acid)

OR (b) Write down the reaction for the formation of A from B. What is this reaction called?

  1. CH3COOH+3Cl2→red PCCl3COOH+3HCl\mathrm{CH_{3}COOH} + 3\mathrm{Cl_{2}} \xrightarrow{\text{red P}} \mathrm{CCl_{3}COOH} + 3\mathrm{HCl}: the α-hydrogens are replaced one by one (then water is added to work up).
  2. This is the Hell–Volhard–Zelinsky (HVZ) reaction.
AnswerCH₃COOH + 3Cl₂ (red P) → CCl₃COOH + 3HCl; Hell–Volhard–Zelinsky reaction

OR (c) Give any one method by which organic compound B can be prepared from its corresponding acid chloride.

  1. Hydrolysis with water: CH3COCl+H2O→CH3COOH+HCl\mathrm{CH_{3}COCl} + \mathrm{H_{2}O} \rightarrow \mathrm{CH_{3}COOH} + \mathrm{HCl}.
AnswerHydrolysis: CH₃COCl + H₂O → CH₃COOH + HCl

OR (d) Which will be the more acidic compound (A) or (B)? Why?

  1. A, trichloroacetic acid (pKa 0.7, against 4.76 for acetic acid). The three electron-withdrawing Cl atoms (–I effect) spread the negative charge of the carboxylate ion and stabilise it, so A gives up H⁺ much more readily.
AnswerA (CCl₃COOH): three –I chlorines stabilise its anion

OR (e) Write down the reaction to prepare methane from the compound (B).

  1. Neutralise B to its sodium salt, then decarboxylate with soda lime (NaOH + CaO) on heating: CH3COOH+NaOH→CH3COONa+H2O\mathrm{CH_{3}COOH} + \mathrm{NaOH} \rightarrow \mathrm{CH_{3}COONa} + \mathrm{H_{2}O}, CH3COONa+NaOH→CaO, heatCH4+Na2CO3\mathrm{CH_{3}COONa} + \mathrm{NaOH} \xrightarrow{\text{CaO, heat}} \mathrm{CH_{4}} + \mathrm{Na_{2}CO_{3}}.
AnswerSodium ethanoate heated with soda lime gives CH₄ + Na₂CO₃
Ask about this question
Q35

Question 35 (5 marks)

Chapter 4: The d- and f-Block Elements
Answer the following:
  1. (a)
    Why are all copper halides known except that copper iodide?
  2. (b)
    Why is the E(V3+/V2+)∘E^\circ_{(\mathrm{V^{3+}/V^{2+}})} value for vanadium comparatively low?
  3. (c)
    Why HCl should not be used for potassium permanganate titrations?
  4. (d)
    Explain the observation, at the end of each period, there is a slight increase in the atomic radius of d block elements.
  5. (e)
    What is the effect of pH on dichromate ion solution?

Tests: Properties of d-block elements: redox behaviour, electrode potentials, atomic radii, KMnO₄ and K₂Cr₂O₇.

Show solution

(a) Why are all copper halides known except that copper iodide?

  1. Copper(II) iodide, CuI₂, is the one that does not exist (copper(I) iodide, CuI, is well known). Cu²⁺ oxidises iodide to iodine, so mixing them gives CuI and I₂ instead:
  2. 2Cu2++4I−→Cu2I2+I2\mathrm{2Cu^{2+} + 4I^- \rightarrow Cu_2I_2 + I_2} (i.e. 2CuI+I2\mathrm{2CuI + I_2}).
AnswerCu²⁺ oxidises I⁻ to I₂, so CuI₂ cannot exist (CuI forms)

(b) Why is the E(V3+/V2+)∘E^\circ_{(\mathrm{V^{3+}/V^{2+}})} value for vanadium comparatively low?

  1. E∘(V3+/V2+)=−0.26E^\circ(\mathrm{V^{3+}/V^{2+}}) = -0.26 V: V3+\mathrm{V^{3+}} is hard to reduce, i.e. V2+\mathrm{V^{2+}} is easily oxidised. The low value reflects the stability of V2+\mathrm{V^{2+}} (3d33d^3, half-filled t2gt_{2g} level in its octahedral complexes).
AnswerStability of V²⁺ (half-filled t₂g, d³)

(c) Why HCl should not be used for potassium permanganate titrations?

  1. Permanganate oxidises HCl to chlorine, so some KMnO4\mathrm{KMnO_4} is used up by the acid and the titre is wrong: 2KMnO4+16HCl→2KCl+2MnCl2+5Cl2+8H2O2\mathrm{KMnO_{4}} + 16\mathrm{HCl} \rightarrow 2\mathrm{KCl} + 2\mathrm{MnCl_{2}} + 5\mathrm{Cl_{2}} + 8\mathrm{H_{2}O}.
  2. Dilute H2SO4\mathrm{H_2SO_4}, which is not oxidised, is used instead.
AnswerHCl is oxidised to Cl₂ by KMnO₄

(d) Explain the observation, at the end of each period, there is a slight increase in the atomic radius of d block elements.

  1. Towards the end of each series (Cu, Zn) the d subshell becomes full (d¹⁰). The full d set shields the outer s electrons well and the repulsion among the many d electrons grows, which outweighs the rising nuclear charge, so the atomic radius increases slightly.
AnswerA full d¹⁰ set shields the s electrons more and electron repulsion grows

(e) What is the effect of pH on dichromate ion solution?

  1. Chromate and dichromate interconvert with pH. Raising the pH (adding alkali) turns orange dichromate into yellow chromate: Cr2O72−+2OH−→2CrO42−+H2O\mathrm{Cr_2O_7^{2-} + 2OH^- \rightarrow 2CrO_4^{2-} + H_2O}.
  2. Lowering the pH (adding acid) reverses it: 2CrO42−+2H+→Cr2O72−+H2O\mathrm{2CrO_4^{2-} + 2H^+ \rightarrow Cr_2O_7^{2-} + H_2O}. Chromium stays +6 throughout.
AnswerIn base, orange Cr₂O₇²⁻ → yellow CrO₄²⁻; in acid, back to dichromate
Ask about this question

Questions are quoted from the CBSE Class 12 Chemistry Sample Question Paper 2022-23 (subject code 043); figures are described in words. Every final answer is checked against the official CBSE marking scheme. Where a question offers a choice, both options are solved.

Question papers are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to CBSE. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.