AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

CBSE Class 12 Physics Sample Paper 2024-25 with Solutions

Step-by-step solutions to all 33 questions of the CBSE Class 12 Physics sample question paper for 2024-25, from electrostatics to semiconductors, written the way the marking scheme awards marks. Every key and number is checked against the official marking scheme and recomputed from the question, the places where the scheme slips are corrected and explained, and every question has a doubt chat.

CBSE Class 12 Physics Sample Question Paper 2024-25, subject code 042: 33 questions, 70 marks, 3 hours. Open any question to see the steps one at a time, ask a doubt about a step, or practise its chapter.

Section A: 16 questions of 1 mark each: 12 MCQs and 4 assertion-reason

Q1

Question 1 (1 mark)

Chapter 2: Electrostatic Potential and Capacitance
A uniform electric field pointing in positive X-direction exists in a region. Let A be the origin, B be the point on the X-axis at x = +1 cm and C be the point on the Y-axis at y = +1 cm. Then the potential at points A, B and C satisfy.
  1. (A)VA<VBV_A < V_B
  2. (B)VA>VBV_A > V_B
  3. (C)VA<VCV_A < V_C
  4. (D)VA>VCV_A > V_C

Tests: Potential decreases along the electric field and is constant perpendicular to it.

Show solution
  1. The potential falls along the direction of the field: E=−dVdxE = -\dfrac{dV}{dx}. B is 1 cm from A along the field, so VB=VA−E(0.01 m)<VAV_B = V_A - E(0.01\ \text{m}) < V_A.
  2. C is displaced from A at right angles to the field, so A and C lie on the same equipotential: V_A = V_C. That rules out (C) and (D).

    Why: No work is done moving a charge perpendicular to the field.

Answer(B) VA>VBV_A > V_B
Ask about this question
Q2

Question 2 (1 mark)

Chapter 2: Electrostatic Potential and Capacitance
A conducting wire connects two charged conducting spheres of radii r1r_1 and r2r_2 such that they attain equilibrium with respect to each other. The distance of separation between the two spheres is very large as compared to either of their radii. The ratio of the magnitudes of the electric fields at the surfaces of the spheres of radii r1r_1 and r2r_2 is
  1. (A)r1r2\dfrac{r_1}{r_2}
  2. (B)r2r1\dfrac{r_2}{r_1}
  3. (C)r22r12\dfrac{r_2^2}{r_1^2}
  4. (D)r12r22\dfrac{r_1^2}{r_2^2}

Tests: Charge sharing between connected conductors; the field is stronger at the smaller sphere.

Show solution
  1. Joined by a wire, the spheres reach the same potential: kq1r1=kq2r2\dfrac{kq_1}{r_1} = \dfrac{kq_2}{r_2}, so q1q2=r1r2\dfrac{q_1}{q_2} = \dfrac{r_1}{r_2}.

    Why: Far apart, each sphere's potential is due to its own charge only.

  2. Surface field E=kqr2E = \dfrac{kq}{r^2}: E1E2=q1q2⋅r22r12=r1r2⋅r22r12=r2r1\dfrac{E_1}{E_2} = \dfrac{q_1}{q_2} \cdot \dfrac{r_2^2}{r_1^2} = \dfrac{r_1}{r_2} \cdot \dfrac{r_2^2}{r_1^2} = \dfrac{r_2}{r_1}.
Answer(B) r2r1\dfrac{r_2}{r_1}
Ask about this question
Q3

Question 3 (1 mark)

Chapter 4: Moving Charges and Magnetism
A long straight wire of circular cross section of radius ‘a’ carries a steady current I. The current is uniformly distributed across its cross section. The ratio of magnitudes of the magnetic field at a point a/2 above the surface of wire to that of a point a/2 below its surface is
  1. (A)4 : 1
  2. (B)1 : 1
  3. (C)4 : 3
  4. (D)3 : 4

Tests: Magnetic field inside and outside a current-carrying wire from Ampère's circuital law.

Show solution
  1. Outside (distance 3a2\dfrac{3a}{2} from the axis), Ampère's law gives B2=μ0I2π(3a/2)=μ0I3πaB_2 = \dfrac{\mu_0 I}{2\pi(3a/2)} = \dfrac{\mu_0 I}{3\pi a}.
  2. Inside (distance a2\dfrac{a}{2} from the axis), the loop encloses I(a/2)2a2=I4I\dfrac{(a/2)^2}{a^2} = \dfrac{I}{4}, so B1=μ0(I/4)2π(a/2)=μ0I4πaB_1 = \dfrac{\mu_0 (I/4)}{2\pi(a/2)} = \dfrac{\mu_0 I}{4\pi a}.

    Why: Only the current inside the Amperian loop counts.

  3. B2B1=1/31/4=43\dfrac{B_2}{B_1} = \dfrac{1/3}{1/4} = \dfrac{4}{3}.
Answer(C) 4 : 3
Ask about this question
Q4

Question 4 (1 mark)

Chapter 10: Wave Optics
The diffraction effect can be observed in
  1. (A)sound waves only
  2. (B)light waves only
  3. (C)ultrasonic waves only
  4. (D)sound waves as well as light waves

Tests: Diffraction as a general wave property.

Show solution
  1. Diffraction is a property of every wave: it bends round an obstacle or opening whose size is comparable with its wavelength. Sound (we hear round corners), ultrasound and light all diffract; light needs very small openings because its wavelength is tiny.
Answer(D) sound waves as well as light waves
Ask about this question
Q5

Question 5 (1 mark)

Chapter 8: Electromagnetic Waves
A capacitor consists of two parallel plates, with an area of cross-section of 0.001 m², separated by a distance of 0.0001 m. If the voltage across the plates varies at the rate of 10810^8 V/s, then the value of displacement current through the capacitor is
  1. (A)8.85×10−38.85 \times 10^{-3} A
  2. (B)8.85×10−48.85 \times 10^{-4} A
  3. (C)7.85×10−37.85 \times 10^{-3} A
  4. (D)9.85×10−39.85 \times 10^{-3} A

Tests: Displacement current in a charging capacitor.

Show solution
  1. C=ε0Ad=8.85×10−12×10−310−4=8.85×10−11C = \dfrac{\varepsilon_0 A}{d} = \dfrac{8.85 \times 10^{-12} \times 10^{-3}}{10^{-4}} = 8.85 \times 10^{-11} F.
  2. Id=ε0dϕEdt=CdVdt=8.85×10−11×108=8.85×10−3I_d = \varepsilon_0 \dfrac{d\phi_E}{dt} = C\dfrac{dV}{dt} = 8.85 \times 10^{-11} \times 10^8 = 8.85 \times 10^{-3} A.
Answer(A) 8.85×10−38.85 \times 10^{-3} A
Ask about this question
Q6

Question 6 (1 mark)

Chapter 7: Alternating Current
In a series LCR circuit, the voltage across the resistance, capacitance and inductance is 10 V each. If the capacitance is short circuited the voltage across the inductance will be
  1. (A)10 V
  2. (B)10210\sqrt{2} V
  3. (C)10/210/\sqrt{2} V
  4. (D)20 V

Tests: Phasor addition of voltages in a series LCR circuit.

Show solution
  1. Same current through all three, so IR=IXC=IXL=10IR = IX_C = IX_L = 10 V gives XC=XL=RX_C = X_L = R. The circuit is at resonance: Z=RZ = R and the source voltage is V=IR=10V = IR = 10 V.
  2. Short the capacitor: Z′=R2+XL2=R2Z' = \sqrt{R^2 + X_L^2} = R\sqrt{2}, so I′=10R2I' = \dfrac{10}{R\sqrt 2}.
  3. VL=I′XL=10R2×R=102=52≈7.07V_L = I'X_L = \dfrac{10}{R\sqrt2} \times R = \dfrac{10}{\sqrt 2} = 5\sqrt2 \approx 7.07 V.

    Why: The marking scheme writes 5√2 V, the same value.

Answer(C) 10/210/\sqrt{2} V
Ask about this question
Q7

Question 7 (1 mark)

Chapter 8: Electromagnetic Waves
Correct match of column I with column II is
C-I (waves)C-II (Production)
(1) Infra-redP. Rapid vibration of electrons in aerials
(2) RadioQ. Electrons in atoms emit light when they move from higher to lower energy level.
(3) LightR. Klystron valve
(4) MicrowaveS. Vibration of atoms and molecules
  1. (A)1-P, 2-R, 3-S, 4-Q
  2. (B)1-S, 2-P, 3-O, 4-R
  3. (C)1-Q, 2-P, 3-S, 4-R
  4. (D)1-S, 2-R, 3-P, 4-Q

Tests: Sources of the different bands of the electromagnetic spectrum.

Show solution
  1. Infra-red comes from hot bodies, whose atoms and molecules vibrate: 1-S. Radio waves come from accelerated electrons in aerials: 2-P.
  2. Visible light is emitted when electrons in atoms jump to a lower level: 3-Q. Microwaves are produced by klystrons (and magnetrons): 4-R.
  3. 1-S, 2-P, 3-Q, 4-R is option (B); its printed '3-O' is a misprint for 3-Q.

    Why: There is no O in column II.

Answer(B) 1-S, 2-P, 3-Q, 4-R
Ask about this question
Q8

Question 8 (1 mark)

Chapter 12: Atoms
The distance of closest approach of an alpha particle is d when it moves with a speed V towards a nucleus. Another alpha particle is projected with higher energy such that the new distance of the closest approach is d/2. What is the speed of projection of the alpha particle in this case?
  1. (A)V/2
  2. (B)2\sqrt{2} V
  3. (C)2 V
  4. (D)4 V

Tests: Distance of closest approach from energy conservation.

Show solution
  1. At closest approach all the kinetic energy has become potential energy: 12mV2=k(2e)(Ze)d\dfrac{1}{2}mV^2 = \dfrac{k(2e)(Ze)}{d}, so d∝1V2d \propto \dfrac{1}{V^2}.
  2. Halving dd needs V2V^2 doubled: V′=2 VV' = \sqrt{2}\,V.
Answer(B) 2\sqrt{2} V
Ask about this question
Q9

Question 9 (1 mark)

Chapter 9: Ray Optics and Optical Instruments
A point object is placed at the centre of a glass sphere of radius 6 cm and refractive index 1.5. The distance of virtual image from the surface of the sphere is
  1. (A)2 cm
  2. (B)4 cm
  3. (C)6 cm
  4. (D)12 cm

Tests: Refraction at a spherical surface.

Show solution
  1. Refraction from glass (n1=1.5n_1 = 1.5) into air (n2=1n_2 = 1) at the surface: u=−6u = -6 cm, R=−6R = -6 cm (the centre is on the incident side).
  2. n2v−n1u=n2−n1R\dfrac{n_2}{v} - \dfrac{n_1}{u} = \dfrac{n_2 - n_1}{R}: 1v+1.56=−0.5−6\dfrac{1}{v} + \dfrac{1.5}{6} = \dfrac{-0.5}{-6}, so 1v=112−312=−16\dfrac{1}{v} = \dfrac{1}{12} - \dfrac{3}{12} = -\dfrac{1}{6}, v=−6v = -6 cm.
  3. The image is at the centre itself, 6 cm from the surface: every ray from the centre meets the surface along a normal and goes straight out.

    Why: A quick check without the formula.

Answer(C) 6 cm
Ask about this question
Q10

Question 10 (1 mark)

Chapter 10: Wave Optics
Colours observed on a CD (Compact Disk) is due to
  1. (A)Reflection
  2. (B)Diffraction
  3. (C)Dispersion
  4. (D)Absorption

Tests: A CD as a diffraction grating.

Show solution
  1. The tracks of a CD are closely and regularly spaced (about 1.6 μm apart), comparable to the wavelength of light, so the disc acts as a reflection grating. Each colour is diffracted most strongly in a different direction, so we see colours.
Answer(B) Diffraction
Ask about this question
Q11

Question 11 (1 mark)

Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits
The number of electrons made available for conduction by dopant atoms depends strongly upon
  1. (A)doping level
  2. (B)increase in ambient temperature
  3. (C)energy gap
  4. (D)options (A) and (B) both

Tests: Carriers contributed by dopants in an extrinsic semiconductor.

Show solution
  1. Each donor atom gives one electron, and its level is so close to the conduction band (about 0.01 to 0.05 eV) that almost every donor is already ionised at room temperature.
  2. So the number of electrons from dopants is set by how many dopant atoms there are, the doping level. Temperature mainly changes the number of thermally generated electron-hole pairs, which come from the host atoms, not the dopants.
Answer(A) doping level
Ask about this question
Q12

Question 12 (1 mark)

Chapter 3: Current Electricity
If copper wire is stretched to make its radius decrease by 0.1%, then the percentage change in its resistance is approximately
  1. (A)−0.4%
  2. (B)+0.8%
  3. (C)+0.4%
  4. (D)+0.2%

Tests: Resistance of a wire stretched at constant volume.

Show solution
  1. Stretching keeps the volume fixed: πr2l\pi r^2 l = constant, so l∝1r2l \propto \dfrac{1}{r^2}.
  2. R=ρlπr2∝1r4R = \dfrac{\rho l}{\pi r^2} \propto \dfrac{1}{r^4}, so ΔRR=−4Δrr=−4×(−0.1%)=+0.4%\dfrac{\Delta R}{R} = -4\dfrac{\Delta r}{r} = -4 \times (-0.1\%) = +0.4\%.

    Why: Small changes: the percentage change of x^n is n times that of x.

Answer(C) +0.4%
Ask about this question
Q13

Question 13 (1 mark)

Chapter 4: Moving Charges and Magnetism
Assertion (A): On increasing the current sensitivity of a galvanometer by increasing the number of turns may not necessarily increase its voltage sensitivity. \nReason (R): The resistance of the coil of the galvanometer increases on increasing the number of turns.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: Current and voltage sensitivity of a moving coil galvanometer.

Show solution
  1. Current sensitivity ϕI=NABk\dfrac{\phi}{I} = \dfrac{NAB}{k} rises with NN. Voltage sensitivity ϕV=NABkR\dfrac{\phi}{V} = \dfrac{NAB}{kR}.
  2. More turns means a longer wire, so RR rises roughly in proportion to NN, and NR\dfrac{N}{R} may stay the same: A is true, and R is true and is the reason.
Answer(A)
Ask about this question
Q14

Question 14 (1 mark)

Chapter 12: Atoms
Assertion (A): In a hydrogen atom there is only one electron but its emission spectrum shows many lines. \nReason (R): In a given sample of hydrogen there are many atoms each containing one electron; hence many electrons in different atoms may be in different orbits so many transitions from higher to lower orbits are possible.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: Origin of the many lines of the hydrogen spectrum.

Show solution
  1. A is true: the hydrogen spectrum has several series (Lyman, Balmer, Paschen, ...) with many lines.
  2. R is true and explains A: a sample has a huge number of atoms; at any moment their electrons are excited to different levels and drop by different routes, so all the possible transitions appear together.
Answer(A)
Ask about this question
Q15

Question 15 (1 mark)

Chapter 13: Nuclei
Assertion (A): Nuclei having mass number about 60 are least stable. \nReason (R): When two or more light nuclei are combined into a heavier nucleus then the binding energy per nucleon will decrease.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: The binding energy per nucleon curve and nuclear stability.

Show solution
  1. A is false: binding energy per nucleon peaks (about 8.75 MeV) near A = 56 to 60, so these nuclei are the MOST stable.
  2. R is false: fusing light nuclei moves them up the curve, so the binding energy per nucleon increases; that is why fusion releases energy.
Answer(D)
Ask about this question
Q16

Question 16 (1 mark)

Chapter 11: Dual Nature of Radiation and Matter
Assertion (A): de Broglie's wavelength of a freely falling body keeps decreasing with time. \nReason (R): The momentum of the freely falling body increases with time.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: de Broglie wavelength and momentum.

Show solution
  1. A freely falling body speeds up (v=gtv = gt), so its momentum p=mvp = mv increases: R is true.
  2. λ=hp\lambda = \dfrac{h}{p}, so as pp increases λ\lambda decreases: A is true, and R explains it.
Answer(A)
Ask about this question

Section B: 5 questions of 2 marks each

Q17

Question 17 (2 marks)

Chapter 11: Dual Nature of Radiation and Matter
A platinum surface having work function 5.63 eV is illuminated by a monochromatic source of 1.6×10151.6 \times 10^{15} Hz. What will be the minimum wavelength associated with the ejected electron.

Tests: Einstein's photoelectric equation and the de Broglie wavelength of the emitted electrons.

Show solution
  1. Photon energy: hν=6.63×10−34×1.6×1015=1.06×10−18h\nu = 6.63 \times 10^{-34} \times 1.6 \times 10^{15} = 1.06 \times 10^{-18} J =6.63= 6.63 eV.
  2. Kmax⁡=hν−ϕ0=6.63−5.63=1.0K_{\max} = h\nu - \phi_0 = 6.63 - 5.63 = 1.0 eV =1.6×10−19= 1.6 \times 10^{-19} J.
  3. The fastest electrons have the shortest de Broglie wavelength: λmin⁡=h2mKmax⁡=6.63×10−342×9.1×10−31×1.6×10−19=6.63×10−345.40×10−25\lambda_{\min} = \dfrac{h}{\sqrt{2mK_{\max}}} = \dfrac{6.63 \times 10^{-34}}{\sqrt{2 \times 9.1 \times 10^{-31} \times 1.6 \times 10^{-19}}} = \dfrac{6.63 \times 10^{-34}}{5.40 \times 10^{-25}}.

    Why: λ = h/p and p = √(2mK).

  4. λmin⁡≈1.23×10−9\lambda_{\min} \approx 1.23 \times 10^{-9} m ≈1.23\approx 1.23 nm.
  5. The marking scheme instead computes hcKmax⁡=12.4×10−7\dfrac{hc}{K_{\max}} = 12.4 \times 10^{-7} m, the wavelength of a 1 eV photon. The wavelength associated with a moving electron is its de Broglie wavelength h/ph/p.
Answerλmin⁡≈1.23×10−9\lambda_{\min} \approx 1.23 \times 10^{-9} m (de Broglie wavelength of the fastest electrons)
Ask about this question
Q18

Question 18 (2 marks)

Chapter 10: Wave Optics
Attempt either option (I) or (II).
  1. (I)
    A beam of light consisting of two wavelengths, 4000 Å and 6000 Å, is used to obtain interference fringes in a Young’s double-slit experiment. What is the least distance from the central maximum where the dark fringe is obtained?
  2. (II)
    OR: In Young’s double-slit experiment using monochromatic light of wavelength λ, the intensities of two sources are I. What is the intensity of light at a point where path difference between wavefronts is λ/4?

Tests: Positions of dark fringes in Young's experiment; resultant intensity from the phase difference.

Show solution

(I) A beam of light consisting of two wavelengths, 4000 Å and 6000 Å, is used to obtain interference fringes in a Young’s double-slit experiment. What is the least distance from the central maximum where the dark fringe is obtained?

  1. Dark fringes are at x=(n+12)λDdx = \left(n + \dfrac{1}{2}\right)\dfrac{\lambda D}{d}, n=0,1,2,…n = 0, 1, 2, \dots The question gives neither DD nor dd; the marking scheme takes Dd=100\dfrac{D}{d} = 100 (for example D=1D = 1 m, d=1d = 1 cm).
  2. First dark fringes: for 4000 Å, x1=12×4×10−7×100=2×10−5x_1 = \dfrac{1}{2} \times 4 \times 10^{-7} \times 100 = 2 \times 10^{-5} m; for 6000 Å, x2=12×6×10−7×100=3×10−5x_2 = \dfrac{1}{2} \times 6 \times 10^{-7} \times 100 = 3 \times 10^{-5} m.
  3. Can both be dark at one point? That needs (2n+1)λ1=(2m+1)λ2(2n + 1)\lambda_1 = (2m + 1)\lambda_2, that is (2n+1)×2=(2m+1)×3(2n + 1) \times 2 = (2m + 1) \times 3. The left side is even and the right side odd, so it never happens: no point of this pattern is completely dark.

    Why: Dark fringes of 4000 Å are at 2, 6, 10, ... and of 6000 Å at 3, 9, 15, ... (× 10⁻⁵ m).

  4. So the nearest dark fringe to the central maximum is the first dark fringe of 4000 Å, at x=λ1D2d=2×10−5x = \dfrac{\lambda_1 D}{2d} = 2 \times 10^{-5} m (with the scheme's D/dD/d).
  5. The marking scheme takes the "LCM" 6×10−56 \times 10^{-5} m; there the 4000 Å light is dark, but the 6000 Å light has its first bright fringe (x=λ2D/dx = \lambda_2 D/d), so that point is not dark.
AnswerNo point is dark for both wavelengths; the nearest dark fringe (of 4000 Å) is at λ1D2d=2×10−5\dfrac{\lambda_1 D}{2d} = 2 \times 10^{-5} m for D/d=100D/d = 100

(II) OR: In Young’s double-slit experiment using monochromatic light of wavelength λ, the intensities of two sources are I. What is the intensity of light at a point where path difference between wavefronts is λ/4?

  1. Inet=I1+I2+2I1I2cos⁡ϕ=2I(1+cos⁡ϕ)=4Icos⁡2ϕ2I_{net} = I_1 + I_2 + 2\sqrt{I_1 I_2}\cos\phi = 2I(1 + \cos\phi) = 4I\cos^2\dfrac{\phi}{2}.
  2. Phase difference ϕ=2πλ×λ4=π2\phi = \dfrac{2\pi}{\lambda} \times \dfrac{\lambda}{4} = \dfrac{\pi}{2}.
  3. Inet=4Icos⁡2π4=4I×12=2II_{net} = 4I\cos^2\dfrac{\pi}{4} = 4I \times \dfrac{1}{2} = 2I.
Answer2I
Ask about this question
Q19

Question 19 (2 marks)

Chapter 4: Moving Charges and Magnetism
P and Q are two identical charged particles each of mass 4×10−264 \times 10^{-26} kg and charge 4.8×10−194.8 \times 10^{-19} C, each moving with the same speed of 2.4×1052.4 \times 10^5 m/s as shown in the figure. The two particles are equidistant (0.5 m) from the vertical Y-axis. At some instant, a magnetic field B is switched on so that the two particles undergo head-on collision. (Figure: Q is on the X-axis, to the left of the Y-axis, moving along +X; P is 1 m above the X-axis, to the right of the Y-axis, moving along −X.) Find (I) the direction of the magnetic field and (II) the magnitude of the magnetic field applied in the region.
  1. VI
    For visually impaired candidates: A proton is moving with speed of 2×1052 \times 10^5 m/s enters a uniform magnetic field B = 1.5 T. At the entry velocity vector makes an angle of 30° to the direction of the magnetic field. Calculate (a) the pitch of helical path described by the charge (b) Kinetic energy after completing half of the circle.

Tests: Circular and helical motion of a charge in a magnetic field.

Show solution

(I)

  1. For a head-on collision, P must curve downwards and Q upwards, each through a quarter circle, so that they meet on the Y-axis midway, at (0, 0.5 m), moving straight at each other.
  2. For P (positive, velocity −i^-\hat i) the force must be along −j^-\hat j: (−i^)×B⃗∥−j^(-\hat i) \times \vec B \parallel -\hat j needs B⃗\vec B along −k^-\hat k, since (−i^)×(−k^)=i^×k^=−j^(-\hat i) \times (-\hat k) = \hat i \times \hat k = -\hat j. Check Q: i^×(−k^)=+j^\hat i \times (-\hat k) = +\hat j, upwards.

    Why: F = q v × B for a positive charge.

AnswerPerpendicular to the plane of the paper, into it

(II)

  1. Each quarter circle takes the particle 0.5 m across and 0.5 m vertically, so the radius is r = 0.5 m.
  2. r=mvqBr = \dfrac{mv}{qB} gives B=mvqr=4×10−26×2.4×1054.8×10−19×0.5=0.04B = \dfrac{mv}{qr} = \dfrac{4 \times 10^{-26} \times 2.4 \times 10^5}{4.8 \times 10^{-19} \times 0.5} = 0.04 T.
AnswerB = 0.04 T

VI For visually impaired candidates: A proton is moving with speed of 2×1052 \times 10^5 m/s enters a uniform magnetic field B = 1.5 T. At the entry velocity vector makes an angle of 30° to the direction of the magnetic field. Calculate (a) the pitch of helical path described by the charge (b) Kinetic energy after completing half of the circle.

  1. (a) The component along B, vcos⁡30∘v\cos 30^\circ, carries the proton forward; the component across B makes it circle with period T=2πmqBT = \dfrac{2\pi m}{qB}.
  2. Pitch p=vcos⁡30∘×T=2πmvcos⁡30∘qB=2×3.14×1.7×10−27×2×105×0.8661.6×10−19×1.5≈7.7×10−3p = v\cos 30^\circ \times T = \dfrac{2\pi m v\cos 30^\circ}{qB} = \dfrac{2 \times 3.14 \times 1.7 \times 10^{-27} \times 2 \times 10^5 \times 0.866}{1.6 \times 10^{-19} \times 1.5} \approx 7.7 \times 10^{-3} m.
  3. (b) The magnetic force is always perpendicular to the velocity, so it does no work and the KE is unchanged: K=12mv2=12×1.7×10−27×(2×105)2=3.4×10−17K = \dfrac{1}{2}mv^2 = \dfrac{1}{2} \times 1.7 \times 10^{-27} \times (2 \times 10^5)^2 = 3.4 \times 10^{-17} J.
AnswerPitch ≈7.7×10−3\approx 7.7 \times 10^{-3} m; KE =3.4×10−17= 3.4 \times 10^{-17} J
Ask about this question
Q20

Question 20 (2 marks)

Chapter 13: Nuclei
Binding energy per nucleon vs mass number curve for nuclei is shown in the figure. W, X, Y and Z are four nuclei indicated on the curve. Identify which of the following nuclei is most likely to undergo (i) Nuclear Fission (ii) Nuclear Fusion. Justify your answer. (Figure: the curve rises steeply, peaks and then falls slowly. Z is at A = 30 with 5.0 MeV, Y at A = 60 with 8.5 MeV, X at A = 90 with 8.0 MeV and W at A = 190 with 7.5 MeV.)
  1. VI
    For visually impaired candidates: Binding energy per nucleon and mass number of the following nuclei are given in the table: W 7.5 MeV, 190; X 8.0 MeV, 90; Y 8.5 MeV, 60; Z 5.0 MeV, 30. Identify which of the following nuclei is most likely to undergo (i) Nuclear Fission (ii) Nuclear Fusion. Justify your answer.

Tests: Using the binding energy curve to see which nuclei release energy by fission or fusion.

Show solution

  1. (i) Fission: W. It is the heaviest (A = 190) and its binding energy per nucleon (7.5 MeV) is lower than that of the middle nuclei X and Y. Splitting it into two middle-mass nuclei raises the binding energy per nucleon, so energy is released.
  2. (ii) Fusion: Z. It is light (A = 30) and has a low binding energy per nucleon (5.0 MeV), on the steep rising part of the curve. Fusing such nuclei raises the binding energy per nucleon, so energy is released.

    Why: The scheme's reason says Z has more binding energy per nucleon than X and Y; it has less, which is the point.

Answer(i) W (fission); (ii) Z (fusion)

VI For visually impaired candidates: Binding energy per nucleon and mass number of the following nuclei are given in the table: W 7.5 MeV, 190; X 8.0 MeV, 90; Y 8.5 MeV, 60; Z 5.0 MeV, 30. Identify which of the following nuclei is most likely to undergo (i) Nuclear Fission (ii) Nuclear Fusion. Justify your answer.

  1. Energy is released when the products have a higher binding energy per nucleon than the starting nuclei.
  2. (i) W (A = 190, 7.5 MeV): heavy, and splitting it gives middle nuclei with about 8 to 8.5 MeV per nucleon. (ii) Z (A = 30, 5.0 MeV): light, and fusing it moves towards the peak.
Answer(i) W; (ii) Z
Ask about this question
Q21

Question 21 (2 marks)

Chapter 3: Current Electricity
A cylindrical conductor of length l and cross-section area A is connected to a DC source. Under the influence of electric field set up due to source, the free electrons begin to drift in the opposite direction of the electric field.
  1. (I)
    Draw the curve showing the dependency of drift velocity on relaxation time.
  2. (II)
    If the DC source is replaced by a source whose current changes its magnitude with time such that I=I0sin⁡2πνtI = I_0 \sin 2\pi\nu t, where ν\nu is the frequency of variation of current, then determine the average drift velocity of the free electrons over one complete cycle.

Tests: Drift velocity, relaxation time and alternating current.

Show solution

(I) Draw the curve showing the dependency of drift velocity on relaxation time.

  1. vd=eEmτv_d = \dfrac{eE}{m}\tau: for a given field, the drift velocity is directly proportional to the relaxation time τ\tau.
  2. Graph: vdv_d on the y-axis against τ\tau on the x-axis is a straight line through the origin, with slope eEm\dfrac{eE}{m}.
AnswerA straight line through the origin

(II) If the DC source is replaced by a source whose current changes its magnitude with time such that I=I0sin⁡2πνtI = I_0 \sin 2\pi\nu t, where ν\nu is the frequency of variation of current, then determine the average drift velocity of the free electrons over one complete cycle.

  1. vd=IneAv_d = \dfrac{I}{neA} follows the current, so vd=I0neAsin⁡2πνtv_d = \dfrac{I_0}{neA}\sin 2\pi\nu t.
  2. The current is in one direction for half the cycle and in the opposite direction, with the same values, for the other half. The average of sin over a full cycle is zero, so the average drift velocity is zero.
AnswerZero
Ask about this question

Section C: 7 questions of 3 marks each

Q22

Question 22 (3 marks)

Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits
(I) Identify the circuit elements X and Y as shown in the given block diagram and draw the output waveforms of X and Y. (Block diagram: an AC source feeds block X, whose output feeds block Y, whose output feeds a D.C. appliance.) (II) If the centre tapping is shifted towards Diode D1 as shown in the diagram, draw the output waveform of the given circuit. (Diagram: a centre-tap transformer. End A of the secondary goes through diode D₁ and end B through diode D₂ to a common point X; the load R_L is between X and Y, and Y is joined to the centre tap, which is earthed. The tap is drawn nearer the end A.)
  1. VI
    For visually impaired candidates: Which device is used to convert AC into DC. State it’s underlying principle and explain its working. If the frequency of input AC to this device is 60 Hz, then what will be frequency of the output of this device.

Tests: Rectifier and filter, and how the centre tap sets each diode's share of the output.

Show solution

(I)

  1. X is a rectifier (full-wave): it turns AC into unidirectional, pulsating DC. Y is a filter (a capacitor across the load): it smooths the pulses into nearly steady DC for the appliance.
  2. Output of X: a row of identical positive half-sine humps, one for every half cycle, touching zero between them.
  3. Output of Y: a nearly flat line just below the peak value, with a small ripple: the capacitor charges near each peak and discharges slowly through the load between peaks.
AnswerX: full-wave rectifier; Y: filter

(II)

  1. With the tap moved towards the D₁ end, the half of the secondary that feeds D₁ has fewer turns, so it gives a smaller voltage than the half that feeds D₂.
  2. Output across R_L: still one hump in every half cycle, all positive, but they alternate: a smaller hump when D₁ conducts, a taller hump when D₂ conducts, and so on.
AnswerAlternate small (D₁) and large (D₂) humps, all on the same side

VI For visually impaired candidates: Which device is used to convert AC into DC. State it’s underlying principle and explain its working. If the frequency of input AC to this device is 60 Hz, then what will be frequency of the output of this device.

  1. A rectifier (made with p-n junction diodes).
  2. Principle: a diode conducts when forward biased and offers a very high resistance when reverse biased, so current passes in one direction only.

    Why: The marking scheme's 'changing the frequency' is not the principle.

  3. Working: during the half cycle that forward biases a diode, current flows through the load; in the other half cycle that diode blocks. In a full-wave rectifier a second diode conducts in that half, so current through the load is always in the same direction and the voltage across it is positive or zero.
  4. Output frequency: a half-wave rectifier gives one pulse per cycle, 60 Hz; a full-wave rectifier gives two, 120 Hz.
AnswerRectifier; one-way conduction of a diode; 60 Hz (half-wave), 120 Hz (full-wave)
Ask about this question
Q23

Question 23 (3 marks)

Chapter 2: Electrostatic Potential and Capacitance
Find the expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d when (I) a dielectric slab of thickness t and (II) a metallic slab of thickness t, where (t < d) are introduced one by one between the plates of the capacitor. In which case would the capacitance be more and why?

    Tests: Capacitance with a dielectric slab and with a metal slab.

    Show solution

    (I)

    1. Charges ±q\pm q on the plates give a field E0=σε0=qAε0E_0 = \dfrac{\sigma}{\varepsilon_0} = \dfrac{q}{A\varepsilon_0} in the air gaps. The slab is polarised; its induced charges reduce the field inside it to E=E0KE = \dfrac{E_0}{K}.
    2. V=E0(d−t)+E0Kt=qAε0(d−t+tK)V = E_0(d - t) + \dfrac{E_0}{K}t = \dfrac{q}{A\varepsilon_0}\left(d - t + \dfrac{t}{K}\right).
    3. C=qV=ε0Ad−t+tKC = \dfrac{q}{V} = \dfrac{\varepsilon_0 A}{d - t + \dfrac{t}{K}}.

      Why: Check: t = d gives Kε₀A/d.

    AnswerC=ε0Ad−t+t/KC = \dfrac{\varepsilon_0 A}{d - t + t/K}

    (II)

    1. Inside a metal the field is zero (the slab behaves as K→∞K \to \infty), so V=E0(d−t)V = E_0(d - t) and C=ε0Ad−tC = \dfrac{\varepsilon_0 A}{d - t}.
    2. The metallic slab gives more capacitance: d−t<d−t+tKd - t < d - t + \dfrac{t}{K} because tK>0\dfrac{t}{K} > 0. With the metal, the field vanishes over the whole thickness tt, so the same charge gives a smaller potential difference.
    AnswerC=ε0Ad−tC = \dfrac{\varepsilon_0 A}{d - t}; more with the metallic slab
    Ask about this question
    Q24

    Question 24 (3 marks)

    Chapter 9: Ray Optics and Optical Instruments
    (I) Draw a ray diagram for the formation of image by a Cassegrain telescope. (II) Why these types of telescopes are preferred over refracting type telescopes. (Write 2 points)
    1. VI
      For visually impaired candidates: A Cassegrain telescope is built with an arrangement of two mirrors placing them 20 mm apart. If the radius of curvature of the large mirror is 200 mm and the small mirror is 150 mm, where will the final image of an object at infinity be?

    Tests: The Cassegrain reflecting telescope and the advantages of mirror objectives.

    Show solution

    (I)

    1. Draw a large concave objective (primary) mirror with a hole at its centre, and a small convex secondary mirror in front of it on the axis, facing the primary.
    2. Parallel rays from a distant object fall on the primary and are reflected towards its focus. Before they reach it, the secondary mirror reflects them back through the hole in the primary, where they form the image, viewed through an eyepiece behind the primary. Label the objective mirror, secondary mirror and eyepiece.
    AnswerPrimary concave mirror, convex secondary, image through the central hole to the eyepiece

    (II)

    1. A mirror objective has no chromatic aberration, and a parabolic mirror is free from spherical aberration.
    2. A mirror can be made much larger (it is supported over its whole back and is lighter than an equal lens), so it gathers more light and resolves finer detail. (Any two such points.)
    AnswerNo chromatic aberration; large aperture, so brighter images and better resolution

    VI For visually impaired candidates: A Cassegrain telescope is built with an arrangement of two mirrors placing them 20 mm apart. If the radius of curvature of the large mirror is 200 mm and the small mirror is 150 mm, where will the final image of an object at infinity be?

    1. Primary (large, concave): f₁ = R₁/2 = 100 mm. Secondary (small, convex): f₂ = R₂/2 = 75 mm.
    2. The primary would form the image 100 mm in front of it, but the secondary, 20 mm in front, intercepts the converging rays. They act as a virtual object 100 − 20 = 80 mm behind the secondary: u₂ = +80 mm (taking the direction of the light falling on the secondary as positive).
    3. Mirror formula: 1v2=1f2−1u2=175−180=11200\dfrac{1}{v_2} = \dfrac{1}{f_2} - \dfrac{1}{u_2} = \dfrac{1}{75} - \dfrac{1}{80} = \dfrac{1}{1200}, so v2=1200v_2 = 1200 mm.
    4. The final image is 1200 mm from the secondary mirror. (Here the virtual object, 80 mm, lies just beyond the convex mirror's focal length, 75 mm, so the reflected rays diverge slightly and, strictly, the image is virtual, 1200 mm behind the secondary.)

      Why: The marking scheme gives 1200 mm without the side.

    Answer1200 mm from the secondary mirror
    Ask about this question
    Q25

    Question 25 (3 marks)

    Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits
    (I) Draw the energy band diagram for P-type semiconductor at (i) T = 0 K and (ii) room temperature. (II) In the given diagram considering an ideal diode, in which condition will the bulb glow (a) when the switch is open (b) when the switch is closed. Justify your answer. (Circuit: a cell, positive terminal on the left, drives current up the left wire and along the top wire from left to right through the bulb. A switch and an ideal diode in series, the diode pointing left to right, are connected across the bulb.)
    1. VI
      For visually impaired candidates: Explain briefly how (i) barrier potential is formed in p-n junction diode. (ii) Width of depletion region of the diode is affected when it is (a) forward biased, (b) reverse biased.

    Tests: Energy bands of a p-type semiconductor; a diode as a switch in a circuit.

    Show solution

    (I)

    1. (i) T = 0 K: the valence band is completely full, the conduction band is completely empty, separated by the gap E_g. A row of empty acceptor levels E_A lies just above the top of the valence band.
    2. (ii) Room temperature: the acceptor levels (about 0.01 to 0.05 eV above E_V) are filled by electrons from the valence band, leaving many holes in the valence band. A very few electrons are thermally excited across the gap into the conduction band, so holes far outnumber electrons.
    AnswerAcceptor level just above the valence band; at room temperature many holes in the valence band

    (II)

    1. The cell's positive terminal drives current from left to right along the top, which is the direction the diode points: when its branch is complete, the diode is forward biased.
    2. (a) Switch open: the diode branch is broken, so all the current passes through the bulb, and it glows.
    3. (b) Switch closed: the forward-biased ideal diode has zero resistance and short-circuits the bulb; the current bypasses the bulb, which does not glow.
    AnswerThe bulb glows when the switch is open (a)

    VI For visually impaired candidates: Explain briefly how (i) barrier potential is formed in p-n junction diode. (ii) Width of depletion region of the diode is affected when it is (a) forward biased, (b) reverse biased.

    1. (i) At the junction, electrons diffuse from the n-side to the p-side and holes from the p-side to the n-side. They leave behind immobile positive donor ions on the n-side and negative acceptor ions on the p-side: the depletion layer. The field of these ions opposes further diffusion, and the potential difference across this layer is the barrier potential.
    2. (ii) (a) Forward bias opposes the barrier, so the depletion region becomes narrower. (b) Reverse bias adds to the barrier, so the depletion region becomes wider.
    AnswerImmobile ions in the depletion layer set up the barrier; narrower in forward bias, wider in reverse bias
    Ask about this question
    Q26

    Question 26 (3 marks)

    Chapter 4: Moving Charges and Magnetism
    A boy is holding a smooth, hollow and non-conducting pipe vertically with charged spherical ball of mass 10 g carrying a charge of +10 mC inside it which is free to move along the axis of the pipe. The boy is moving the pipe from East to West direction in the presence of magnetic field of 2T. With what minimum velocity, should the boy move the pipe such that the ball does not move along the axis. Also determine the direction of the magnetic field.

    Tests: Balancing the magnetic force on a moving charge against gravity.

    Show solution
    1. The ball stays put when the magnetic force balances its weight: qvBsin⁡θ=mgqvB\sin\theta = mg, so v=mgqBsin⁡θv = \dfrac{mg}{qB\sin\theta}.
    2. vv is least when sin⁡θ=1\sin\theta = 1 (B perpendicular to the motion): v=mgqB=10−2×9.810−2×2=4.9v = \dfrac{mg}{qB} = \dfrac{10^{-2} \times 9.8}{10^{-2} \times 2} = 4.9 m/s.
    3. Direction: the force must be upwards with the velocity towards the West. With i^\hat i East, j^\hat j North, k^\hat k up: v⃗∥−i^\vec v \parallel -\hat i, and (−i^)×(−j^)=i^×j^=k^(-\hat i) \times (-\hat j) = \hat i \times \hat j = \hat k. So B⃗\vec B is horizontal, pointing from North to South.

      Why: F = q v × B for a positive charge (Fleming's left-hand rule gives the same).

    Answer4.9 m/s; B horizontal, from North to South
    Ask about this question
    Q27

    Question 27 (3 marks)

    Chapter 9: Ray Optics and Optical Instruments
    A light ray entering a right-angled prism undergoes refraction at the face AC as shown in Fig. 1. (Fig. 1: prism ABC with the right angle at B, AB vertical, BC the base and ∠C = 45°. A horizontal ray enters face AB normally and, at the slanted face AC, the refracted ray grazes along AC towards C.)
    1. (I)
      What is the refractive index of the material of the prism in Fig. 1?
    2. (II)
      (a) If the side AC of the above prism is now surrounded by a liquid of refractive index 23\dfrac{2}{\sqrt{3}}, as shown in Fig. 2, determine if the light ray continues to graze along the interface AC or undergoes total internal reflection or undergoes refraction into the liquid. (b) Draw the ray diagram to represent the path followed by the incident ray with the corresponding angle values. (Given, sin⁡−1(23)=54.6∘\sin^{-1}\left(\dfrac{\sqrt2}{\sqrt3}\right) = 54.6^\circ)
    3. VI
      For visually impaired candidates: A ray of light is incident on an equilateral prism at an angle 3/4 th of the angle of the prism. If the ray passes symmetrically through the prism, find the (a) angle of minimum deviation, and (b) refractive index of the material of the prism.

    Tests: Critical angle and refraction at a glass-liquid interface; minimum deviation in a prism.

    Show solution

    (I) What is the refractive index of the material of the prism in Fig. 1?

    1. The ray enters AB along the normal, undeviated. Since ∠C = 45° and ∠B = 90°, ∠A = 45°, and the ray meets AC at an angle of incidence of 45°.
    2. It grazes along AC, so 45° is the critical angle: n=1sin⁡45∘=2n = \dfrac{1}{\sin 45^\circ} = \sqrt{2}.
    Answern=2≈1.41n = \sqrt{2} \approx 1.41

    (II) (a) If the side AC of the above prism is now surrounded by a liquid of refractive index 23\dfrac{2}{\sqrt{3}}, as shown in Fig. 2, determine if the light ray continues to graze along the interface AC or undergoes total internal reflection or undergoes refraction into the liquid. (b) Draw the ray diagram to represent the path followed by the incident ray with the corresponding angle values. (Given, sin⁡−1(23)=54.6∘\sin^{-1}\left(\dfrac{\sqrt2}{\sqrt3}\right) = 54.6^\circ)

    1. (a) Critical angle for glass to liquid: sin⁡θC=nlng=2/32=23\sin\theta_C = \dfrac{n_l}{n_g} = \dfrac{2/\sqrt3}{\sqrt2} = \dfrac{\sqrt2}{\sqrt3}, so θC≈54.6∘\theta_C \approx 54.6^\circ (more exactly 54.7°).
    2. The angle of incidence on AC is still 45°, less than the critical angle, so the ray neither grazes nor is totally reflected: it is refracted into the liquid.
    3. (b) ngsin⁡i=nlsin⁡rn_g\sin i = n_l\sin r: 2sin⁡45∘=23sin⁡r\sqrt2 \sin 45^\circ = \dfrac{2}{\sqrt3}\sin r, so sin⁡r=32\sin r = \dfrac{\sqrt3}{2} and r=60∘r = 60^\circ.
    4. Diagram: the ray goes straight through AB, meets AC at 45° to the normal, and bends away from the normal into the liquid at 60° to the normal, heading slightly downwards beyond AC.
    AnswerRefracted into the liquid at 60° to the normal

    VI For visually impaired candidates: A ray of light is incident on an equilateral prism at an angle 3/4 th of the angle of the prism. If the ray passes symmetrically through the prism, find the (a) angle of minimum deviation, and (b) refractive index of the material of the prism.

    1. A=60∘A = 60^\circ, so i=34×60∘=45∘i = \dfrac{3}{4} \times 60^\circ = 45^\circ. Passing symmetrically means minimum deviation, with e=i=45∘e = i = 45^\circ.
    2. (a) δm=i+e−A=45∘+45∘−60∘=30∘\delta_m = i + e - A = 45^\circ + 45^\circ - 60^\circ = 30^\circ.
    3. (b) μ=sin⁡A+δm2sin⁡A2=sin⁡45∘sin⁡30∘=2\mu = \dfrac{\sin\frac{A + \delta_m}{2}}{\sin\frac{A}{2}} = \dfrac{\sin 45^\circ}{\sin 30^\circ} = \sqrt2.
    Answerδm=30∘\delta_m = 30^\circ, μ=2\mu = \sqrt{2}
    Ask about this question
    Q28

    Question 28 (3 marks)

    Chapter 1: Electric Charges and Fields
    Attempt either option (I) or (II).
    1. (I)
      State Gauss’s theorem in electrostatics. Using this theorem, derive an expression for the electric field due to an infinitely long straight wire of linear charge density λ.
    2. (II)
      OR: (a) Define electric flux and write its SI unit. (b) Use Gauss’s law to obtain the expression for the electric field due to a uniformly charged infinite plane sheet of charge.

    Tests: Gauss's law and its use for a line charge and a plane sheet.

    Show solution

    (I) State Gauss’s theorem in electrostatics. Using this theorem, derive an expression for the electric field due to an infinitely long straight wire of linear charge density λ.

    1. Gauss's theorem: the electric flux through any closed surface is 1ε0\dfrac{1}{\varepsilon_0} times the charge enclosed: ∮E⃗⋅dS⃗=qε0\oint \vec E \cdot d\vec S = \dfrac{q}{\varepsilon_0}.
    2. Take a cylindrical Gaussian surface of radius r and length l coaxial with the wire. By symmetry E is radial and has the same magnitude everywhere on the curved surface.
    3. On the flat ends E⃗⊥dS⃗\vec E \perp d\vec S (no flux); on the curved surface E⃗∥dS⃗\vec E \parallel d\vec S: ϕ=E×2πrl\phi = E \times 2\pi r l.
    4. Charge enclosed =λl= \lambda l: E⋅2πrl=λlε0E \cdot 2\pi r l = \dfrac{\lambda l}{\varepsilon_0}, so E=λ2πε0rE = \dfrac{\lambda}{2\pi\varepsilon_0 r}, directed radially outward for λ>0\lambda > 0.
    AnswerE=λ2πε0rE = \dfrac{\lambda}{2\pi\varepsilon_0 r}

    (II) OR: (a) Define electric flux and write its SI unit. (b) Use Gauss’s law to obtain the expression for the electric field due to a uniformly charged infinite plane sheet of charge.

    1. (a) Electric flux through a surface is the surface integral of the field over it, ϕ=∫E⃗⋅dS⃗\phi = \int \vec E \cdot d\vec S (for a uniform field and flat area, EAcos⁡θEA\cos\theta): a measure of the field lines crossing it. SI unit: N m² C⁻¹ (equivalently V m).
    2. (b) Take a cylinder of cross-section A piercing the sheet at right angles, with its two flat faces at equal distances on either side. By symmetry E is perpendicular to the sheet, pointing away on both sides (for σ > 0).
    3. Flux through the curved surface is zero (E⃗⊥dS⃗\vec E \perp d\vec S); through each flat face it is EAEA. Total ϕ=2EA\phi = 2EA.
    4. Charge enclosed =σA= \sigma A: 2EA=σAε02EA = \dfrac{\sigma A}{\varepsilon_0}, so E=σ2ε0E = \dfrac{\sigma}{2\varepsilon_0}, independent of the distance from the sheet.
    AnswerE=σ2ε0E = \dfrac{\sigma}{2\varepsilon_0}
    Ask about this question

    Section D: 2 case study-based questions of 4 marks each

    Q29

    Question 29 (4 marks)

    Chapter 4: Moving Charges and Magnetism
    Case Study Based Question: Motion of Charge in Magnetic Field. An electron with speed v0≪cv_0 \ll c moves in a circle of radius r0r_0 in a uniform magnetic field. This electron is able to traverse a circular path as the magnetic force acting on the electron is perpendicular to both v0v_0 and B, as shown in the figure. This force continuously deflects the particle sideways without changing its speed and the particle will move along a circle perpendicular to the field. The time required for one revolution of the electron is T0T_0. (Figure: the field B points into the page everywhere; the charge moves round a circle of radius r₀, and at each position the force F points towards the centre, perpendicular to v₀.)
    1. (i)
      If the speed of the electron is now doubled to 2v02v_0. The radius of the circle will change to (A) 4r04r_0 (B) 2r02r_0 (C) r0r_0 (D) r0/2r_0/2
    2. (ii)
      If v=2v0v = 2v_0, then the time required for one revolution of the electron (T0T_0) will change to (A) 4T04T_0 (B) 2T02T_0 (C) T0T_0 (D) T0/2T_0/2
    3. (iii)
      A charged particle is projected in a magnetic field B⃗=(2i^+4j^)×102\vec B = (2\hat i + 4\hat j) \times 10^2 T. The acceleration of the particle is found to be a⃗=(xi^+2j^)\vec a = (x\hat i + 2\hat j) m/s². Find the value of x. (A) 4 m/s² (B) −4 m/s² (C) −2 m/s² (D) 2 m/s²
    4. (iv)
      If the given electron has a velocity not perpendicular to B, then trajectory of the electron is (A) straight line (B) circular (C) helical (D) zig-zag
    5. (iv) OR
      OR: If this electron of charge (e) is moving parallel to uniform magnetic field with constant velocity v, the force acting on the electron is (A) Bev (B) Be/v (C) B/ev (D) Zero

    Tests: Radius, period and path of a charge moving in a uniform magnetic field.

    Show solution

    (i) If the speed of the electron is now doubled to 2v02v_0. The radius of the circle will change to (A) 4r04r_0 (B) 2r02r_0 (C) r0r_0 (D) r0/2r_0/2

    1. r=mvqB∝vr = \dfrac{mv}{qB} \propto v: doubling the speed doubles the radius, 2r02r_0.
    Answer(B) 2r02r_0

    (ii) If v=2v0v = 2v_0, then the time required for one revolution of the electron (T0T_0) will change to (A) 4T04T_0 (B) 2T02T_0 (C) T0T_0 (D) T0/2T_0/2

    1. T=2πrv=2πmqBT = \dfrac{2\pi r}{v} = \dfrac{2\pi m}{qB} does not depend on the speed: the circle is twice as long, but the electron goes twice as fast. It stays T0T_0.
    Answer(C) T0T_0

    (iii) A charged particle is projected in a magnetic field B⃗=(2i^+4j^)×102\vec B = (2\hat i + 4\hat j) \times 10^2 T. The acceleration of the particle is found to be a⃗=(xi^+2j^)\vec a = (x\hat i + 2\hat j) m/s². Find the value of x. (A) 4 m/s² (B) −4 m/s² (C) −2 m/s² (D) 2 m/s²

    1. The magnetic force qv⃗×B⃗q\vec v \times \vec B is always perpendicular to B⃗\vec B, so a⃗⋅B⃗=0\vec a \cdot \vec B = 0.
    2. (x)(2)+(2)(4)=0(x)(2) + (2)(4) = 0, so x=−4x = -4 m/s².
    Answer(B) −4 m/s²

    (iv) If the given electron has a velocity not perpendicular to B, then trajectory of the electron is (A) straight line (B) circular (C) helical (D) zig-zag

    1. Split v into a part along B, which is not affected and carries the electron forward steadily, and a part across B, which makes it go round in a circle. Together: a helix.
    Answer(C) helical

    (iv) OR OR: If this electron of charge (e) is moving parallel to uniform magnetic field with constant velocity v, the force acting on the electron is (A) Bev (B) Be/v (C) B/ev (D) Zero

    1. F=evBsin⁡θF = evB\sin\theta with θ=0∘\theta = 0^\circ: the force is zero.
    Answer(D) Zero
    Ask about this question
    Q30

    Question 30 (4 marks)

    Chapter 11: Dual Nature of Radiation and Matter
    Case Study Based Question: Photoelectric effect. It is the phenomenon of emission of electrons from a metallic surface when light of a suitable frequency is incident on it. The emitted electrons are called photoelectrons. Nearly all metals exhibit this effect with ultraviolet light but alkali metals like lithium, sodium, potassium, cesium etc. show this effect even with visible light. It is an instantaneous process i.e. photoelectrons are emitted as soon as the light is incident on the metal surface. The number of photoelectrons emitted per second is directly proportional to the intensity of the incident radiation. The maximum kinetic energy of the photoelectrons emitted from a given metal surface is independent of the intensity of the incident light and depends only on the frequency of the incident light. For a given metal surface there is a certain minimum value of the frequency of the incident light below which emission of photoelectrons does not occur.
    1. (I)
      In a photoelectric experiment plate current is plotted against anode potential. (Graph: three curves of current I against anode potential V. A and B start from the same negative cut-off potential; C starts from a more negative cut-off. B and C level off at the same saturation current; A levels off at a lower one.) (A) A and B will have same intensities while B and C will have different frequencies (B) B and C will have different intensities while A and B will have different frequencies (C) A and B will have different intensities while B and C will have equal frequencies (D) B and C will have equal intensities while A and B will have same frequencies.
    2. (II)
      Photoelectrons are emitted when a zinc plate is (A) Heated (B) hammered (C) Irradiated by ultraviolet light (D) subjected to a high pressure
    3. (III)
      The threshold frequency for photoelectric effect on sodium corresponds to a wavelength of 500 nm. Its work function is about (A) 4×10−194 \times 10^{-19} J (B) 1 J (C) 2×10−192 \times 10^{-19} J (D) 3×10−193 \times 10^{-19} J
    4. (IV)
      The maximum kinetic energy of photoelectrons emitted from a surface when photons of energy 6 eV fall on it is 4 eV. The stopping potential is (A) 2 V (B) 4 V (C) 6 V (D) 10 V
    5. (IV) OR
      OR: The minimum energy required to remove an electron from a substance is called its (A) work function (B) kinetic energy (C) stopping potential (D) potential energy

    Tests: Photoelectric effect: frequency, intensity, work function and stopping potential.

    Show solution

    (I) In a photoelectric experiment plate current is plotted against anode potential. (Graph: three curves of current I against anode potential V. A and B start from the same negative cut-off potential; C starts from a more negative cut-off. B and C level off at the same saturation current; A levels off at a lower one.) (A) A and B will have same intensities while B and C will have different frequencies (B) B and C will have different intensities while A and B will have different frequencies (C) A and B will have different intensities while B and C will have equal frequencies (D) B and C will have equal intensities while A and B will have same frequencies.

    1. The cut-off (stopping) potential depends only on the frequency; the saturation current depends on the intensity.
    2. A and B: same stopping potential, so same frequency; different saturation currents, so different intensities. B and C: same saturation current, so equal intensities; different stopping potentials, so different frequencies (C's is higher).
    3. Only (D) states both correctly.
    Answer(D)

    (II) Photoelectrons are emitted when a zinc plate is (A) Heated (B) hammered (C) Irradiated by ultraviolet light (D) subjected to a high pressure

    1. Zinc's work function (about 4.3 eV) needs photons of ultraviolet light; visible light cannot eject electrons from it. Heating gives thermionic, not photo, emission.
    Answer(C) Irradiated by ultraviolet light

    (III) The threshold frequency for photoelectric effect on sodium corresponds to a wavelength of 500 nm. Its work function is about (A) 4×10−194 \times 10^{-19} J (B) 1 J (C) 2×10−192 \times 10^{-19} J (D) 3×10−193 \times 10^{-19} J

    1. ϕ0=hcλ0=6.63×10−34×3×108500×10−9=3.98×10−19\phi_0 = \dfrac{hc}{\lambda_0} = \dfrac{6.63 \times 10^{-34} \times 3 \times 10^8}{500 \times 10^{-9}} = 3.98 \times 10^{-19} J ≈4×10−19\approx 4 \times 10^{-19} J.
    Answer(A) 4×10−194 \times 10^{-19} J

    (IV) The maximum kinetic energy of photoelectrons emitted from a surface when photons of energy 6 eV fall on it is 4 eV. The stopping potential is (A) 2 V (B) 4 V (C) 6 V (D) 10 V

    1. eV0=Kmax⁡=4eV_0 = K_{\max} = 4 eV, so V0=4V_0 = 4 V. (The photon energy is not needed; the work function is 6 − 4 = 2 eV.)
    Answer(B) 4 V

    (IV) OR OR: The minimum energy required to remove an electron from a substance is called its (A) work function (B) kinetic energy (C) stopping potential (D) potential energy

    1. That is the definition of the work function.
    Answer(A) work function
    Ask about this question

    Section E: 3 long answer questions of 5 marks each

    Q31

    Question 31 (5 marks)

    Chapter 3: Current Electricity
    Attempt either option (I) or (II).
    1. (I)(a)
      Write two limitations of ohm’s law. Plot their I-V characteristics.
    2. (I)(b)
      A heating element connected across a battery of 100 V having an internal resistance of 1 Ω draws an initial current of 10 A at room temperature 20.0 °C which settles after a few seconds to a steady value. What is the power consumed by battery itself after the steady temperature of 320.0 °C is attained? Temperature coefficient of resistance averaged over the temperature range involved is 3.70×10−43.70 \times 10^{-4} °C⁻¹.
    3. (II)(a)
      OR: Using Kirchhoff’s laws obtain the equation of the balanced state in Wheatstone bridge.
    4. (II)(b)
      A wire of uniform cross-section and resistance of 12 ohm is bent in the shape of circle as shown in the figure. A resistance of 10 ohms is connected to diametrically opposite ends C and D. A battery of emf 8V is connected between A and B. Determine the current flowing through arm AD. (Figure: circle with centre O; C at the top and D at the bottom, the 10 Ω resistor along the diameter CD. A is on the left and B on the right, below the centre, with ∠AOD = ∠DOB = 60°. The 8 V battery is connected between A and B.)
    5. (II)(b) VI
      For visually impaired candidates (in place of (II)(b)): What do you understand by ‘sensitivity of Wheatstone bridge’? How the sensitivity of wheatstone bridge can be increased?

    Tests: Ohm's law and its limits; temperature dependence of resistance; Kirchhoff's laws and the Wheatstone bridge.

    Show solution

    (I)(a) Write two limitations of ohm’s law. Plot their I-V characteristics.

    1. 1. V stops being proportional to I: in some devices the graph of I against V is not a straight line. Sketch: a curve bending away from a straight line through the origin (for example a filament lamp, whose resistance rises as it heats).
    2. 2. The relation depends on the sign of V: reversing V with the same magnitude does not give the same current in the opposite direction. Sketch: a diode's I-V graph, large current for positive V beyond a small knee, almost zero for negative V.
    3. 3. The relation is not unique: for some materials more than one V gives the same current. Sketch: the I-V curve of GaAs, which rises, falls (negative resistance) and rises again.

      Why: Any two with graphs. The marking scheme answers with Kirchhoff's laws instead.

    AnswerNon-linear I-V; dependence on the sign of V; non-unique V for a given I

    (I)(b) A heating element connected across a battery of 100 V having an internal resistance of 1 Ω draws an initial current of 10 A at room temperature 20.0 °C which settles after a few seconds to a steady value. What is the power consumed by battery itself after the steady temperature of 320.0 °C is attained? Temperature coefficient of resistance averaged over the temperature range involved is 3.70×10−43.70 \times 10^{-4} °C⁻¹.

    1. At 20 °C: I=ER0+rI = \dfrac{E}{R_0 + r}, so R0=10010−1=9 ΩR_0 = \dfrac{100}{10} - 1 = 9\ \Omega.
    2. At 320 °C: R=R0(1+αΔT)=9(1+3.70×10−4×300)=9×1.111≈10 ΩR = R_0(1 + \alpha\Delta T) = 9(1 + 3.70 \times 10^{-4} \times 300) = 9 \times 1.111 \approx 10\ \Omega.
    3. Steady current I=10010+1=9.09I = \dfrac{100}{10 + 1} = 9.09 A.
    4. Power consumed in the battery's internal resistance: P=I2r=(10011)2×1≈82.6P = I^2 r = \left(\dfrac{100}{11}\right)^2 \times 1 \approx 82.6 W.
    AnswerAbout 82.6 W

    (II)(a) OR: Using Kirchhoff’s laws obtain the equation of the balanced state in Wheatstone bridge.

    1. Bridge: P from A to B, Q from B to C, R from A to D, S from D to C; galvanometer G (resistance G) between B and D; cell between A and C. Let I₁ enter P, I₂ enter R, and I_g flow from B to D, so Q carries I₁ − I_g and S carries I₂ + I_g.
    2. Loop ABDA: I1P+IgG−I2R=0I_1P + I_gG - I_2R = 0. Loop BCDB: (I1−Ig)Q−(I2+Ig)S−IgG=0(I_1 - I_g)Q - (I_2 + I_g)S - I_gG = 0.
    3. Balanced: Ig=0I_g = 0. Then I1P=I2RI_1P = I_2R and I1Q=I2SI_1Q = I_2S. Dividing: PQ=RS\dfrac{P}{Q} = \dfrac{R}{S}.
    AnswerPQ=RS\dfrac{P}{Q} = \dfrac{R}{S}

    (II)(b) A wire of uniform cross-section and resistance of 12 ohm is bent in the shape of circle as shown in the figure. A resistance of 10 ohms is connected to diametrically opposite ends C and D. A battery of emf 8V is connected between A and B. Determine the current flowing through arm AD. (Figure: circle with centre O; C at the top and D at the bottom, the 10 Ω resistor along the diameter CD. A is on the left and B on the right, below the centre, with ∠AOD = ∠DOB = 60°. The 8 V battery is connected between A and B.)

    1. Resistance is proportional to arc length (12 Ω for 360°). Arc AD = arc DB = 60°: 2 Ω each. Arc AC = arc CB = 120°: 4 Ω each.
    2. Bridge between A and B: RACRCB=44=RADRDB=22\dfrac{R_{AC}}{R_{CB}} = \dfrac{4}{4} = \dfrac{R_{AD}}{R_{DB}} = \dfrac{2}{2}. It is balanced, so no current flows through the 10 Ω resistor.
    3. Path ADB: 2 + 2 = 4 Ω across 8 V, so IAD=84=2I_{AD} = \dfrac{8}{4} = 2 A.
    Answer2 A through AD (none through the 10 Ω)

    (II)(b) VI For visually impaired candidates (in place of (II)(b)): What do you understand by ‘sensitivity of Wheatstone bridge’? How the sensitivity of wheatstone bridge can be increased?

    1. Sensitivity is how much the galvanometer deflects for a small change in the unknown resistance near balance: the larger the deflection per unit change, the more sensitive the bridge.
    2. It is most sensitive when all four arms have resistances of the same order. A more sensitive galvanometer (and a suitable cell voltage) also helps.
    AnswerDeflection per unit change in resistance; largest when the four arms are of the same order
    Ask about this question
    Q32

    Question 32 (5 marks)

    Chapter 7: Alternating Current
    Attempt either option (I) or (II).
    1. (I)
      Explain briefly, with the help of a labelled diagram, the basic principle of the working of an a.c. generator. In an a.c. generator, coil of N turns and area A is rotated at an angular velocity ω in a uniform magnetic field B. Derive an expression for the instantaneous value of the emf induced in coil. What is the source of energy generation in this device?
    2. (II)
      OR: (a) With the help of a diagram, explain the principle of a device which changes a low ac voltage into a high voltage. Deduce the expression for the ratio of secondary voltage to the primary voltage in terms of the ratio of the number of turns of primary and secondary winding. For an ideal transformer, obtain the ratio of primary and secondary currents in terms of the ratio of the voltages in the secondary and primary coils. (b) Write any two sources of the energy losses which occur in actual transformers. (c) A step-up transformer converts a low input voltage into a high output voltage. Does it violate law of conservation of energy? Explain.

    Tests: AC generator and transformer: principle, construction and the key relations.

    Show solution

    (I) Explain briefly, with the help of a labelled diagram, the basic principle of the working of an a.c. generator. In an a.c. generator, coil of N turns and area A is rotated at an angular velocity ω in a uniform magnetic field B. Derive an expression for the instantaneous value of the emf induced in coil. What is the source of energy generation in this device?

    1. Principle: electromagnetic induction. As a coil rotates in a magnetic field, the flux through it keeps changing, so an emf is induced in it.
    2. Diagram: a rectangular coil (armature) ABCD between the pole pieces N and S of a magnet, on an axle perpendicular to the field. Its ends go to two slip rings that turn with it; two fixed carbon brushes press on the rings and connect to the external circuit.
    3. Let the coil's normal make angle θ=ωt\theta = \omega t with B⃗\vec B. Flux linkage Nϕ=NBAcos⁡ωtN\phi = NBA\cos\omega t.
    4. e=−d(Nϕ)dt=NBAωsin⁡ωt=e0sin⁡ωte = -\dfrac{d(N\phi)}{dt} = NBA\omega\sin\omega t = e_0\sin\omega t, with peak e0=NBAωe_0 = NBA\omega.
    5. Source of energy: the mechanical work done in turning the coil against the opposing (Lenz) torque, for example by a turbine, is converted into electrical energy.
    Answere=NBAωsin⁡ωte = NBA\omega\sin\omega t; energy comes from the mechanical work of rotation

    (II) OR: (a) With the help of a diagram, explain the principle of a device which changes a low ac voltage into a high voltage. Deduce the expression for the ratio of secondary voltage to the primary voltage in terms of the ratio of the number of turns of primary and secondary winding. For an ideal transformer, obtain the ratio of primary and secondary currents in terms of the ratio of the voltages in the secondary and primary coils. (b) Write any two sources of the energy losses which occur in actual transformers. (c) A step-up transformer converts a low input voltage into a high output voltage. Does it violate law of conservation of energy? Explain.

    1. (a) The device is a (step-up) transformer; principle: mutual induction. Diagram: primary P and secondary S wound on a laminated soft-iron core; the AC source on P, the load on S, with S having more turns.
    2. The alternating current in P sets up a changing flux ϕ\phi through each turn, the same in both coils (no leakage). εs=−Nsdϕdt\varepsilon_s = -N_s\dfrac{d\phi}{dt} and εp=−Npdϕdt\varepsilon_p = -N_p\dfrac{d\phi}{dt}, so VsVp=NsNp\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} (for negligible coil resistance).
    3. Ideal transformer: power in = power out, VpIp=VsIsV_pI_p = V_sI_s, so IpIs=VsVp=NsNp\dfrac{I_p}{I_s} = \dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}. Step up: Ns>NpN_s > N_p, so Vs>VpV_s > V_p and Is<IpI_s < I_p.
    4. (b) Any two: eddy currents in the core (reduced by laminating it); hysteresis loss in the core; flux leakage; copper (I²R) loss in the windings.
    5. (c) No. The voltage goes up but the current goes down in the same ratio, so the output power VsIs is at most the input VpIp; in a real transformer it is a little less, because of the losses.
    AnswerVsVp=NsNp\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}, IpIs=VsVp\dfrac{I_p}{I_s} = \dfrac{V_s}{V_p}; no violation (current falls as voltage rises)
    Ask about this question
    Q33

    Question 33 (5 marks)

    Chapter 9: Ray Optics and Optical Instruments
    Attempt either option (I) or (II).
    1. (I)
      (a) A giant refracting telescope at an observatory has an objective lens of focal length 15 m. If an eyepiece of focal length 1.0 cm is used, what is angular magnification of the telescope in normal adjustment? (b) If this telescope is used to view the moon, what is the diameter of the image of the moon formed by the objective lens? The diameter of the moon is 3.48×1063.48 \times 10^6 m, and the radius of lunar orbit is 3.8×1083.8 \times 10^8 m.
    2. (II)
      OR: A compound microscope consists of an objective lens of focal length 2.0 cm and an eyepiece of focal length 6.25 cm separated by a distance of 15 cm. How far from the objective should an object be placed in order to obtain the final image at (a) the least distance of distinct vision (25 cm) and (b) infinity? What is the magnifying power of the microscope in each case?

    Tests: Magnifying power of a telescope and of a compound microscope; image of the moon formed by an objective.

    Show solution

    (I) (a) A giant refracting telescope at an observatory has an objective lens of focal length 15 m. If an eyepiece of focal length 1.0 cm is used, what is angular magnification of the telescope in normal adjustment? (b) If this telescope is used to view the moon, what is the diameter of the image of the moon formed by the objective lens? The diameter of the moon is 3.48×1063.48 \times 10^6 m, and the radius of lunar orbit is 3.8×1083.8 \times 10^8 m.

    1. (a) M=fofe=150.01=1500M = \dfrac{f_o}{f_e} = \dfrac{15}{0.01} = 1500.
    2. (b) The moon subtends α=3.48×1063.8×108\alpha = \dfrac{3.48 \times 10^6}{3.8 \times 10^8} rad at the objective. Its image forms in the focal plane and subtends the same angle: α=dfo\alpha = \dfrac{d}{f_o}.

      Why: Rays through the optical centre go undeviated.

    3. d=αfo=3.48×1063.8×108×15≈0.137d = \alpha f_o = \dfrac{3.48 \times 10^6}{3.8 \times 10^8} \times 15 \approx 0.137 m =13.7= 13.7 cm.
    AnswerM = 1500; image diameter about 13.7 cm

    (II) OR: A compound microscope consists of an objective lens of focal length 2.0 cm and an eyepiece of focal length 6.25 cm separated by a distance of 15 cm. How far from the objective should an object be placed in order to obtain the final image at (a) the least distance of distinct vision (25 cm) and (b) infinity? What is the magnifying power of the microscope in each case?

    1. (a) Eyepiece: ve=−25v_e = -25 cm, fe=6.25f_e = 6.25 cm. 1ue=1ve−1fe=−125−425=−15\dfrac{1}{u_e} = \dfrac{1}{v_e} - \dfrac{1}{f_e} = -\dfrac{1}{25} - \dfrac{4}{25} = -\dfrac{1}{5}, so ue=−5u_e = -5 cm.
    2. The objective's image is 15 − 5 = 10 cm from the objective: vo=10v_o = 10 cm, fo=2f_o = 2 cm. 1uo=110−12=−25\dfrac{1}{u_o} = \dfrac{1}{10} - \dfrac{1}{2} = -\dfrac{2}{5}, so uo=−2.5u_o = -2.5 cm: the object is 2.5 cm from the objective.
    3. M=vo∣uo∣(1+Dfe)=102.5(1+256.25)=4×5=20M = \dfrac{v_o}{|u_o|}\left(1 + \dfrac{D}{f_e}\right) = \dfrac{10}{2.5}\left(1 + \dfrac{25}{6.25}\right) = 4 \times 5 = 20.
    4. (b) Final image at infinity: the objective's image is at the eyepiece's focus, vo=15−6.25=8.75v_o = 15 - 6.25 = 8.75 cm. 1uo=18.75−12=−6.7517.5\dfrac{1}{u_o} = \dfrac{1}{8.75} - \dfrac{1}{2} = -\dfrac{6.75}{17.5}, so uo≈−2.59u_o \approx -2.59 cm.
    5. M=vo∣uo∣⋅Dfe=8.752.59×256.25≈3.375×4=13.5M = \dfrac{v_o}{|u_o|} \cdot \dfrac{D}{f_e} = \dfrac{8.75}{2.59} \times \dfrac{25}{6.25} \approx 3.375 \times 4 = 13.5.
    Answer(a) 2.5 cm, M = 20; (b) about 2.59 cm, M = 13.5
    Ask about this question

    Questions are quoted from the CBSE Class 12 Physics Sample Question Paper 2024-25 (subject code 042); figures are described in words. Every final answer is checked against the official CBSE marking scheme. Where a question offers a choice, both options are solved.

    Question papers are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to CBSE. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.