AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

CBSE Class 12 Physics Sample Paper 2025-26 with Solutions

Step-by-step solutions to all 33 questions of the CBSE Class 12 Physics sample question paper for 2025-26, from electrostatics to semiconductors, written the way the marking scheme awards marks. Every key and number is checked against the official marking scheme and recomputed from the question, the places where the scheme slips are corrected and explained, and every question has a doubt chat.

CBSE Class 12 Physics Sample Question Paper 2025-26, subject code 042: 33 questions, 70 marks, 3 hours. Open any question to see the steps one at a time, ask a doubt about a step, or practise its chapter.

Section A: 16 questions of 1 mark each: 12 MCQs and 4 assertion-reason

Q1

Question 1 (1 mark)

Chapter 2: Electrostatic Potential and Capacitance
If a charged hollow sphere and a solid sphere of aluminum and copper of equal radii are in electrostatic equilibrium, then which of the following statements is true?
  1. (A)Both the spheres are having equal charges.
  2. (B)The hollow sphere will have more charge than solid sphere at its surface.
  3. (C)The aluminum sphere will have more charge on its surface than copper sphere.
  4. (D)If hollow sphere is also made up of aluminum then it will have more charge.

Tests: Charge on a conductor sits on its surface; capacitance of a sphere depends only on its radius.

Show solution
  1. In electrostatic equilibrium (for example, joined by a wire) the two spheres are at the same potential.

    Why: Charge flows between conductors until their potentials are equal.

  2. For a conducting sphere q=CVq = CV with C=4πε0rC = 4\pi\varepsilon_0 r. The capacitance depends only on the radius, not on the metal or on whether the sphere is hollow.
  3. Same V and same r give the same q. On both spheres the charge sits on the outer surface.
Answer(A) Both spheres have equal charges
Ask about this question
Q2

Question 2 (1 mark)

Chapter 3: Current Electricity
A coil contains N turns of insulated copper wire of diameter d and resistivity ρ wound on a cylinder of diameter D. What is the total resistance between the two ends of the coil of copper wire? (given: D >> d)
  1. (A)4ρNDd2\dfrac{4\rho ND}{d^2}
  2. (B)8ρNDd2\dfrac{8\rho ND}{d^2}
  3. (C)2ρNDd2\dfrac{2\rho ND}{d^2}
  4. (D)12ρNDd2\dfrac{12\rho ND}{d^2}

Tests: Resistance from resistivity, length and cross-sectional area.

Show solution
  1. Length of wire: each turn is one circumference of the cylinder, so L=NπDL = N\pi D.
  2. Cross-section of the wire: A=πd24A = \dfrac{\pi d^2}{4}.
  3. R=ρLA=ρNπDπd2/4=4ρNDd2R = \dfrac{\rho L}{A} = \dfrac{\rho N \pi D}{\pi d^2/4} = \dfrac{4\rho N D}{d^2}.
Answer(A) 4ρNDd2\dfrac{4\rho ND}{d^2}
Ask about this question
Q3

Question 3 (1 mark)

Chapter 7: Alternating Current
If the phasor diagram for a device connected to AC supply is as shown in the fig, then which of the following statements is true? (The figure shows the voltage phasor V pointing up and to the left, at 135° from the positive x-axis, and the current phasor I pointing down and to the left, at 225°, with a right angle marked between them.)
  1. (A)When the frequency of the AC source is increased than the impedance of the device decreases.
  2. (B)This device behaves as conducting wire when connected across DC source.
  3. (C)When the frequency of the AC source is decreased than the impedance of the device decreases.
  4. (D)This device stores energy in the form of magnetic potential energy.

Tests: Phase relation between current and voltage in a capacitor, and how its reactance depends on frequency.

Show solution
  1. Phasors rotate anticlockwise. I is 90° ahead of V (225° against 135°), so the current leads the voltage by π/2: the device is a capacitor.

    Why: Current leads by π/2 only in a pure capacitor; in a pure inductor it lags.

  2. Its impedance is XC=1ωCX_C = \dfrac{1}{\omega C}, which falls as the frequency rises: (A) is true and (C) is false.
  3. A capacitor blocks steady DC (not (B)) and stores energy in its electric field (not (D)).
Answer(A)
Ask about this question
Q4

Question 4 (1 mark)

Chapter 8: Electromagnetic Waves
Which of the following statement is true for the radio waves and the gamma rays?
  1. (A)The energy of gamma rays is lesser than that of the radio waves.
  2. (B)The frequency of the radio waves is higher than that of gamma rays.
  3. (C)The radio waves and the gamma rays have the same energy.
  4. (D)The energy of radio waves is lesser than that of the gamma rays.

Tests: Order of the electromagnetic spectrum by frequency and photon energy.

Show solution
  1. Photon energy is E=hνE = h\nu. Radio waves have the lowest frequencies in the electromagnetic spectrum and gamma rays the highest, so radio photons carry the least energy.
Answer(D)
Ask about this question
Q5

Question 5 (1 mark)

Chapter 9: Ray Optics and Optical Instruments
A glass prism has internal angles of 45°, 45° and 90°. The glass has a critical angle of 45°. Which of the following ray diagrams depicts the possible path of light through the prism? (In each diagram the right angle is at A and BC is the longest face.)
  1. (A)A points left and BC is vertical on the right. A ray travelling straight down enters the upper face AB, crosses to BC, is reflected there to the lower face AC, and leaves travelling straight down.
  2. (B)A is at the top and BC is horizontal at the bottom. A ray travelling straight down enters face AC, is reflected at the base BC up to face AB, and leaves travelling straight up.
  3. (C)A points left and BC is vertical on the right. A ray travelling to the right enters the lower face AC near A, is reflected at BC back to face AB, and leaves travelling to the left.
  4. (D)A is at the bottom and BC is horizontal at the top. A ray travelling to the right enters the left face AB, is reflected at BC down to face AC, and leaves going downwards to the right.
  1. VI
    For visually impaired candidates: Light passes from a certain medium into air. The critical angle of the given medium is θ. Which of the following expressions gives the speed of light in the given medium, where c is the speed of light in air? (A) 1csin⁡θ\dfrac{1}{c\sin\theta} (B) sin⁡θc\dfrac{\sin\theta}{c} (C) csin⁡θ\dfrac{c}{\sin\theta} (D) csin⁡θc\sin\theta

Tests: Refraction at a prism face and total internal reflection.

Show solution

  1. Refractive index: μ=1sin⁡45∘=2\mu = \dfrac{1}{\sin 45^\circ} = \sqrt{2}.
  2. In every diagram the ray meets the first (slanted) face at 45°: sin⁡r=sin⁡45∘2=12\sin r = \dfrac{\sin 45^\circ}{\sqrt{2}} = \dfrac{1}{2}, so r=30∘r = 30^\circ inside the glass.
  3. (A): the ray then meets BC at 45° + 30° = 75°, more than the critical angle, so it is totally reflected; it meets AC at 30° and leaves at 45°, straight down. This path is possible.

    Why: Total internal reflection needs an angle of incidence greater than the critical angle.

  4. (B) and (C): the ray meets the long face at 45° − 30° = 15°, less than 45°, so it passes out instead of being reflected. (D): reflection at BC is right, but the ray must leave AC parallel to the incoming ray (the path is symmetric), not tilted downwards.
Answer(A)

VI For visually impaired candidates: Light passes from a certain medium into air. The critical angle of the given medium is θ. Which of the following expressions gives the speed of light in the given medium, where c is the speed of light in air? (A) 1csin⁡θ\dfrac{1}{c\sin\theta} (B) sin⁡θc\dfrac{\sin\theta}{c} (C) csin⁡θ\dfrac{c}{\sin\theta} (D) csin⁡θc\sin\theta

  1. μ=1sin⁡θ\mu = \dfrac{1}{\sin\theta} and μ=cv\mu = \dfrac{c}{v}, so v=cμ=csin⁡θv = \dfrac{c}{\mu} = c\sin\theta.
Answer(D) csin⁡θc\sin\theta
Ask about this question
Q6

Question 6 (1 mark)

Chapter 10: Wave Optics
The light from a monochromatic source is incident on a single slit and the resulting diffraction pattern is viewed on a screen. The graph shows the variation of the intensity with the distance on the screen (a tall central maximum with small side maxima). The width of slit is increased keeping the intensity of the source the same. Which of the following graphs is correct? (The original curve is shown with a dashed line.)
  1. (A)The new central maximum is narrower than the dashed curve, with the same peak height.
  2. (B)The new central maximum is wider than the dashed curve, with the same peak height.
  3. (C)The new central maximum is wider and taller than the dashed curve.
  4. (D)The new central maximum is narrower and taller than the dashed curve.
  1. VI
    For visually impaired candidates: The phenomenon of superposition of two waves, resulting in redistribution of energy is known as …… (A) diffraction (B) interference (C) reflection (D) refraction

Tests: How the slit width changes the width and brightness of a single-slit pattern.

Show solution

  1. The width of the central maximum is 2λDa\dfrac{2\lambda D}{a}: a wider slit aa gives a narrower central maximum.
  2. A wider slit also lets more light through, and that light is packed into a narrower band, so the peak is brighter: narrower and taller.
Answer(D)

VI For visually impaired candidates: The phenomenon of superposition of two waves, resulting in redistribution of energy is known as …… (A) diffraction (B) interference (C) reflection (D) refraction

  1. When two waves superpose, energy is moved from the dark fringes to the bright ones; this redistribution is interference.
Answer(B) interference
Ask about this question
Q7

Question 7 (1 mark)

Chapter 12: Atoms
Which of the following transitions corresponds to the emission of the radiation of the maximum wavelength? (The figure is an energy-level diagram with levels n = 1, 2, 3, 4 and ∞, and six arrows: I from 2 down to 1, II from 4 down to 2, III from 3 up to 4, IV from 3 down to 2, V from 1 up to 3, VI from 2 up to 3.)
  1. (A)I
  2. (B)III
  3. (C)IV
  4. (D)VI
  1. VI
    For visually impaired candidates: Which of the following transitions corresponds to the emission of the radiation of the maximum wavelength? I: from 4th orbit to 2nd orbit; II: from 2nd orbit to 1st orbit; III: from 3rd orbit to 4th orbit; IV: from 3rd orbit to 2nd orbit; V: from 1st orbit to 3rd orbit; VI: from 2nd orbit to 3rd orbit. (A) I (B) III (C) IV (D) VI

Tests: Emission versus absorption, and wavelength from the energy gap.

Show solution

  1. Upward arrows (III, V, VI) are absorption, so only I, II and IV emit radiation.
  2. λ=hcΔE\lambda = \dfrac{hc}{\Delta E}: the longest wavelength comes from the smallest energy gap. With En=−13.6n2E_n = -\dfrac{13.6}{n^2} eV: I (2→1) 10.2 eV, II (4→2) 2.55 eV, IV (3→2) 1.89 eV.
Answer(C) IV

VI For visually impaired candidates: Which of the following transitions corresponds to the emission of the radiation of the maximum wavelength? I: from 4th orbit to 2nd orbit; II: from 2nd orbit to 1st orbit; III: from 3rd orbit to 4th orbit; IV: from 3rd orbit to 2nd orbit; V: from 1st orbit to 3rd orbit; VI: from 2nd orbit to 3rd orbit. (A) I (B) III (C) IV (D) VI

  1. III, V and VI go to a higher orbit (absorption). Of the emissions, 3 → 2 (IV) has the smallest energy gap, 1.89 eV, so the longest wavelength.
Answer(C) IV
Ask about this question
Q8

Question 8 (1 mark)

Chapter 4: Moving Charges and Magnetism
A charged particle is projected along the axis of a current carrying loop. Which of the following statements is true?
  1. (A)The acceleration of the charged particle will depend on the velocity with which it is projected.
  2. (B)The acceleration of the charged particle will depend on the magnitude of the current passing through the coil.
  3. (C)The acceleration of the charged particle will depend on the radius of the coil.
  4. (D)The charged particle will move with constant velocity.

Tests: Magnetic force on a charge moving parallel to the field.

Show solution
  1. On the axis of a loop the magnetic field is along the axis, parallel to the velocity. F⃗=q v⃗×B⃗=0\vec F = q\,\vec v \times \vec B = 0 when v⃗∥B⃗\vec v \parallel \vec B, so there is no acceleration and the velocity stays constant.
Answer(D)
Ask about this question
Q9

Question 9 (1 mark)

Chapter 6: Electromagnetic Induction
Two small identical magnets are allowed to fall freely one through a vertical solenoid of 20 m made up of copper and another in air through the same vertical distance. The time taken by the two magnets to fall will be
  1. (A)same in both the cases.
  2. (B)more for the magnet falling in air.
  3. (C)more for the magnet falling through the solenoid.
  4. (D)infinite.

Tests: Lenz's law: induced currents oppose the change that causes them.

Show solution
  1. The falling magnet changes the flux through the copper turns, so a current is induced in them. By Lenz's law this current opposes the motion, slowing the magnet. The magnet in air falls freely with acceleration g, so it takes less time.
Answer(C)
Ask about this question
Q10

Question 10 (1 mark)

Chapter 6: Electromagnetic Induction
The emf generated by an AC generator is given by V = V₀ sin ωt, where ω is angular frequency of armature of generator. What will be the emf if the angular frequency is doubled?
  1. (A)V=V0sin⁡2ωtV = V_0 \sin 2\omega t
  2. (B)V=2V0sin⁡ωtV = 2V_0 \sin \omega t
  3. (C)V=2V0sin⁡2ωtV = 2V_0 \sin 2\omega t
  4. (D)V=V0sin⁡ωtV = V_0 \sin \omega t

Tests: How the emf of an AC generator depends on its angular speed.

Show solution
  1. V=NBAωsin⁡ωtV = NBA\omega \sin \omega t, so the peak V0=NBAωV_0 = NBA\omega is proportional to ω\omega.
  2. Doubling ω\omega doubles the peak and the frequency: V=2V0sin⁡2ωtV = 2V_0 \sin 2\omega t.
Answer(C) V=2V0sin⁡2ωtV = 2V_0 \sin 2\omega t
Ask about this question
Q11

Question 11 (1 mark)

Chapter 13: Nuclei
The ratio of the nuclear densities of two nuclei having the mass numbers 8 and 27 is
  1. (A)8 : 27
  2. (B)3 : 2
  3. (C)2 : 3
  4. (D)1 : 1

Tests: Nuclear density is the same for all nuclei.

Show solution
  1. R=R0A1/3R = R_0 A^{1/3}, so the volume 43πR3=43πR03A\dfrac{4}{3}\pi R^3 = \dfrac{4}{3}\pi R_0^3 A is proportional to AA; the mass is also proportional to AA.
  2. Density = mass / volume does not depend on A, so the ratio is 1 : 1.
Answer(D) 1 : 1
Ask about this question
Q12

Question 12 (1 mark)

Chapter 5: Magnetism and Matter
When we move magnetic compass from point P to Q then which of the following statement is true? (In the figure, a horizontal current-carrying solenoid is drawn; P is on its axis, beyond its right end, and Q is directly above the middle of the solenoid, on the perpendicular bisector of its axis.)
  1. (A)The deflection of the magnetic needle at P and Q will be in the same direction.
  2. (B)The deflection of the magnetic needle at P and Q will be in the opposite directions.
  3. (C)The deflection of the magnetic needle at P and Q will be perpendicular to each other.
  4. (D)The deflection of the magnetic needle at P and Q will be inclined at 45° with respect to each other.

Tests: Field of a solenoid (magnetic dipole) on its axial and equatorial lines.

Show solution
  1. A current-carrying solenoid behaves like a bar magnet. P is on its axial line, where the field is along the magnetic moment; Q is on its equatorial line, where the field is opposite to the magnetic moment.
  2. So the needle points one way at P and the opposite way at Q.
Answer(B)
Ask about this question
Q13

Question 13 (1 mark)

Chapter 12: Atoms
Assertion (A): Total energy of an electron in hydrogen atom is negative. \nReason (R): The centripetal force is provided by electrostatic force.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: Why the energy of a bound electron is negative.

Show solution
  1. A is true: the electron is bound to the nucleus. Taking energy zero at infinite separation, E=−ke22rE = -\dfrac{ke^2}{2r} (−13.6 eV in the ground state).
  2. R is true: the Coulomb attraction supplies the centripetal force.
  3. The marking scheme treats R as not the explanation: the energy is negative because the electron is bound (its negative potential energy outweighs its kinetic energy), and R only says what keeps it in orbit.

    Why: Official key (B).

Answer(B)
Ask about this question
Q14

Question 14 (1 mark)

Chapter 9: Ray Optics and Optical Instruments
Assertion (A): The critical angle of light passing from glass to air is minimum for violet colour. \nReason (R): The wavelength of blue light is greater than the light of other colours.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: Dispersion: refractive index and critical angle vary with colour.

Show solution
  1. sin⁡C=1μ\sin C = \dfrac{1}{\mu}. Glass has the largest refractive index for violet, so violet has the smallest critical angle: A is true.
  2. Red light has the longest wavelength in the visible spectrum; blue is shorter than red, orange, yellow and green: R is false.
Answer(C)
Ask about this question
Q15

Question 15 (1 mark)

Chapter 10: Wave Optics
Assertion (A): Two light sources emitting waves of similar wavelengths are coherent. \nReason (R): Two light sources emitting waves having zero or constant phase difference are known as coherent sources.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: What makes two light sources coherent.

Show solution
  1. A is false: similar (or even equal) wavelengths are not enough. Two independent sources change phase randomly, so their phase difference is not constant and they are not coherent.
  2. R is the usual textbook definition of coherent sources (a constant phase difference also needs the same frequency).
  3. With A false, the four options leave no 'A false, R true'. The marking scheme's key is (D).

    Why: Official key; see the reviewer note.

Answer(D) (official key)
Ask about this question
Q16

Question 16 (1 mark)

Chapter 1: Electric Charges and Fields
Assertion (A): For three point charges to be in equilibrium, they must be collinear. \nReason (R): One of the three charges must have different polarity than rest of the two.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation of Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
  3. (C)Assertion is true but Reason is false.
  4. (D)Both Assertion and Reason are false.

Tests: Equilibrium of a system of point charges.

Show solution
  1. A is true: each charge feels two forces, along the lines to the other two charges. They can cancel only if they are equal and opposite, along one line; so all three charges lie on one line.
  2. R is true: if all three had the same sign, the outer charges would be pushed outwards with nothing to balance them.
  3. But R is about the signs, not about why the charges must lie on a line, so R does not explain A.
Answer(B)
Ask about this question

Section B: 5 questions of 2 marks each

Q17

Question 17 (2 marks)

Chapter 8: Electromagnetic Waves
The amplitude of the magnetic field of a plane electromagnetic wave propagating along positive X axis in vacuum is 510 nT k^\hat{k} and its angular frequency is 60×10660 \times 10^6 rad/sec. Write the expression for the electric field E⃗\vec{E}.

Tests: Relations between E, B, c, k and ω in an electromagnetic wave.

Show solution
  1. E0=cB0=3×108×510×10−9=153E_0 = cB_0 = 3 \times 10^8 \times 510 \times 10^{-9} = 153 N/C.
  2. k=ωc=60×1063×108=0.2k = \dfrac{\omega}{c} = \dfrac{60 \times 10^6}{3 \times 10^8} = 0.2 rad/m.
  3. Direction: E⃗\vec E, B⃗\vec B and the direction of travel are mutually perpendicular with E⃗×B⃗\vec E \times \vec B along +i^+\hat i. With B⃗\vec B along k^\hat k, E⃗\vec E is along j^\hat j (since j^×k^=i^\hat j \times \hat k = \hat i).

    Why: The wave travels along E × B.

  4. E⃗=153sin⁡(6×107t−0.2x) j^\vec E = 153 \sin(6 \times 10^7 t - 0.2x)\,\hat j N/C.
AnswerE⃗=153sin⁡(6×107t−0.2x) j^\vec E = 153 \sin(6 \times 10^7 t - 0.2x)\,\hat j N/C
Ask about this question
Q18

Question 18 (2 marks)

Chapter 3: Current Electricity
The following graph shows the potential difference across the terminals of a cell against its load current. (The graph is a straight line from 6 V at zero current down to 0 V at a load current of 12 A.) Find, (I) the emf of the cell and (II) the internal resistance of the cell.
  1. VI
    For visually impaired candidates: Find the relation between internal resistance, emf, external resistance and the total current in the circuit.

Tests: Terminal voltage, emf and internal resistance of a cell.

Show solution

(I)

  1. When no current is drawn, the terminal voltage equals the emf: read the graph at I = 0, which gives 6 V.

    Why: V = E − Ir, and Ir = 0 when I = 0.

AnswerE = 6 V

(II)

  1. V=E−IrV = E - Ir, so the internal resistance is minus the slope of the graph.
  2. Slope =0−612−0=−0.5= \dfrac{0 - 6}{12 - 0} = -0.5 V/A, so r=0.5 Ωr = 0.5\ \Omega.
Answerr = 0.5 Ω

VI For visually impaired candidates: Find the relation between internal resistance, emf, external resistance and the total current in the circuit.

  1. The emf is shared between the external resistor and the cell's own resistance: E=IR+IrE = IR + Ir.
  2. So I=ER+rI = \dfrac{E}{R + r}.
AnswerI=ER+rI = \dfrac{E}{R + r}
Ask about this question
Q19

Question 19 (2 marks)

Chapter 1: Electric Charges and Fields
A charge q is placed inside a sphere of radius ‘a’ filled with water and another charge 2q is placed inside cube of side ‘2a’ which is vacuumed inside. Find the ratio of the flux linked with the sphere to that linked with the cube. (Take relative permittivity of water as 80)

Tests: Gauss's law: flux depends only on the enclosed charge and the medium.

Show solution
  1. Gauss's law in a medium: ϕ=qenclosedεrε0\phi = \dfrac{q_{\text{enclosed}}}{\varepsilon_r \varepsilon_0}. The size and shape of the surface do not matter.
  2. Sphere: ϕ1=q80 ε0\phi_1 = \dfrac{q}{80\,\varepsilon_0}. Cube: ϕ2=2qε0\phi_2 = \dfrac{2q}{\varepsilon_0}.
  3. ϕ1ϕ2=q/80ε02q/ε0=1160\dfrac{\phi_1}{\phi_2} = \dfrac{q/80\varepsilon_0}{2q/\varepsilon_0} = \dfrac{1}{160}.
Answer1 : 160
Ask about this question
Q20

Question 20 (2 marks)

Chapter 4: Moving Charges and Magnetism
Attempt either option (I) or (II).
  1. (I)
    Write an expression for the magnetic force per unit length between two parallel thin current carrying wires. Hence define one ampere.
  2. (II)
    OR: Draw a diagram representing the behaviour of magnetic field lines for a (A) diamagnetic & (B) paramagnetic substance.
  3. VI
    For visually impaired candidates (in place of (II)): State Gauss's law of magnetism. Hence find the magnetic flux linked with the sphere enclosing a current carrying solenoid.

Tests: Force between parallel currents and the definition of the ampere; diamagnetic and paramagnetic materials.

Show solution

(I) Write an expression for the magnetic force per unit length between two parallel thin current carrying wires. Hence define one ampere.

  1. FL=μ0I1I22πr\dfrac{F}{L} = \dfrac{\mu_0 I_1 I_2}{2\pi r}, where rr is the distance between the wires (attractive for currents in the same direction).
  2. With I1=I2=1I_1 = I_2 = 1 A and r=1r = 1 m: FL=2×10−7\dfrac{F}{L} = 2 \times 10^{-7} N/m. So one ampere is the current which, flowing in each of two infinitely long, thin parallel wires 1 m apart in vacuum, makes each wire exert a force of 2×10−72 \times 10^{-7} N per metre of length on the other.
AnswerF/L=μ0I1I2/2πrF/L = \mu_0 I_1 I_2 / 2\pi r; 1 A gives 2×10−72 \times 10^{-7} N/m at 1 m

(II) OR: Draw a diagram representing the behaviour of magnetic field lines for a (A) diamagnetic & (B) paramagnetic substance.

  1. (A) Diamagnetic: draw a block in a uniform field. The lines bend around the block and are spread out (fewer lines) inside it, as if pushed out.
  2. (B) Paramagnetic: draw the same block. The lines bend towards the block and crowd slightly (more lines) inside it.
AnswerDiamagnetic: lines pushed out; paramagnetic: lines drawn in

VI For visually impaired candidates (in place of (II)): State Gauss's law of magnetism. Hence find the magnetic flux linked with the sphere enclosing a current carrying solenoid.

  1. The net magnetic flux through any closed surface is zero (magnetic field lines are closed loops; there are no isolated magnetic poles).
  2. The sphere is a closed surface, so the net flux through it is zero: every line leaving it re-enters.
AnswerNet flux through any closed surface is zero; here zero
Ask about this question
Q21

Question 21 (2 marks)

Chapter 12: Atoms
Attempt either option (I) or (II).
  1. (I)
    How does the impact parameter affect the trajectory of α-particles scattered by a heavy nucleus? What is the value of impact parameter for head on collision of α-particles with the nucleus?
  2. (II)
    OR: Plot a graph showing variation of de-Broglie wavelength λ\lambda versus 1V\dfrac{1}{\sqrt{V}}, where V is accelerating potential for a particle of mass m and charge q. Obtain the slope of this graph.

Tests: Rutherford scattering and the impact parameter; de Broglie wavelength of an accelerated charge.

Show solution

(I) How does the impact parameter affect the trajectory of α-particles scattered by a heavy nucleus? What is the value of impact parameter for head on collision of α-particles with the nucleus?

  1. The impact parameter is the perpendicular distance of the α-particle's initial path from the centre of the nucleus.
  2. Small impact parameter: the particle passes close to the nucleus and is scattered through a large angle. Large impact parameter: it is hardly deflected and keeps nearly its original path.
  3. For a head-on collision the impact parameter is zero (the particle bounces straight back, scattering angle 180°).
AnswerSmaller impact parameter, larger scattering; zero for head-on

(II) OR: Plot a graph showing variation of de-Broglie wavelength λ\lambda versus 1V\dfrac{1}{\sqrt{V}}, where V is accelerating potential for a particle of mass m and charge q. Obtain the slope of this graph.

  1. Kinetic energy gained =qV= qV, so p=2mqVp = \sqrt{2mqV} and λ=hp=h2mq⋅1V\lambda = \dfrac{h}{p} = \dfrac{h}{\sqrt{2mq}} \cdot \dfrac{1}{\sqrt{V}}.
  2. The graph of λ\lambda against 1V\dfrac{1}{\sqrt V} is a straight line through the origin, with slope h2mq\dfrac{h}{\sqrt{2mq}}.
AnswerStraight line through the origin; slope h2mq\dfrac{h}{\sqrt{2mq}}
Ask about this question

Section C: 7 questions of 3 marks each

Q22

Question 22 (3 marks)

Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits
With the help of circuit diagram explain working of the full wave rectifier.

Tests: Working of a centre-tap full-wave rectifier.

Show solution
  1. Circuit: the AC input goes to the primary of a centre-tapped transformer. The two ends of the secondary go through diodes D₁ and D₂ to a common point; the load resistor R_L is connected between this point and the centre tap.
  2. In one half cycle, the top end of the secondary is positive: D₁ is forward biased and conducts, D₂ is reverse biased. Current flows through R_L in one direction.
  3. In the next half cycle, the bottom end is positive: D₂ conducts and D₁ does not. Current again flows through R_L in the same direction.

    Why: Both diodes deliver current to the load in the same direction.

  4. Output: a series of positive humps, one for each half cycle (unidirectional, pulsating DC). Draw the input sine wave and the output humps labelled D₁, D₂, D₁, D₂.
AnswerEach diode conducts in alternate half cycles, so both halves of the input reach the load in one direction
Ask about this question
Q23

Question 23 (3 marks)

Chapter 3: Current Electricity
(I) The current I₁ in a wire is getting divided in two wires with currents I₂ and I₃ at a junction in a circuit. The currents in the three wires are related by I₁ = I₂ + I₃. (A) State the fundamental law from which this relation is derived. (B) Explain the validation of law of conservation of energy in Kirchhoff's voltage law. (II) How the balancing condition gets affected if you are interchanging the galvanometer and the cell in the Wheatstone bridge?

    Tests: Kirchhoff's rules as conservation laws; the Wheatstone bridge.

    Show solution

    (I)(A)

    1. Conservation of electric charge: charge does not pile up at a junction, so the charge flowing in per second equals the charge flowing out (Kirchhoff's junction rule).
    AnswerConservation of charge

    (I)(B)

    1. The potential at a point has one value. A charge taken round a closed loop returns to its starting potential, so the net work done on it is zero: the energy gained from the cells equals the energy given to the resistors. Hence the algebraic sum of the potential changes round any loop is zero.
    AnswerRound a closed loop, net energy change of a charge is zero

    (II)

    1. No change: the balance condition PQ=RS\dfrac{P}{Q} = \dfrac{R}{S} can be rewritten PR=QS\dfrac{P}{R} = \dfrac{Q}{S}, which is the balance condition with the cell and galvanometer swapped. A balanced bridge stays balanced.
    AnswerBalance is not affected
    Ask about this question
    Q24

    Question 24 (3 marks)

    Chapter 13: Nuclei
    A fast-moving neutron collides with the nucleus of Plutonium (Pu), thereby producing Xenon (Xe) and Zirconium (Zr) along with neutrons. (I) Write the nuclear fission reaction. (II) Find the energy released in the above nuclear reaction. Given atomic masses: m(94239Pu^{239}_{94}\text{Pu}) = 239.052157 u, m(40103Zr^{103}_{40}\text{Zr}) = 102.926597 u, m(54134Xe^{134}_{54}\text{Xe}) = 133.905040 u and m(01n^{1}_{0}n) = 1.00866 u.

      Tests: Balancing a fission reaction and finding the energy from the mass defect.

      Show solution

      (I)

      1. Charge: 94 + 0 = 54 + 40, so the products are Xe and Zr with no other charged particle.
      2. Mass number: 239 + 1 = 240 = 134 + 103 + x, so x = 3 neutrons.
      3. 94239Pu+01n→54134Xe+40103Zr+3 01n^{239}_{94}\text{Pu} + {}^{1}_{0}n \rightarrow {}^{134}_{54}\text{Xe} + {}^{103}_{40}\text{Zr} + 3\,{}^{1}_{0}n
      Answer94239Pu+01n→54134Xe+40103Zr+3 01n^{239}_{94}\text{Pu} + {}^{1}_{0}n \rightarrow {}^{134}_{54}\text{Xe} + {}^{103}_{40}\text{Zr} + 3\,{}^{1}_{0}n

      (II)

      1. Mass defect Δm=[m(Pu)+m(n)]−[m(Xe)+m(Zr)+3m(n)]\Delta m = [m(\text{Pu}) + m(n)] - [m(\text{Xe}) + m(\text{Zr}) + 3m(n)].
      2. Δm=(239.052157+1.00866)−(133.905040+102.926597+3×1.00866)=240.060817−239.857617=0.2032\Delta m = (239.052157 + 1.00866) - (133.905040 + 102.926597 + 3 \times 1.00866) = 240.060817 - 239.857617 = 0.2032 u.
      3. Q=Δm×931.5Q = \Delta m \times 931.5 MeV/u =0.2032×931.5≈189.3= 0.2032 \times 931.5 \approx 189.3 MeV.

        Why: 1 u of mass is equivalent to 931.5 MeV.

      AnswerAbout 189.3 MeV
      Ask about this question
      Q25

      Question 25 (3 marks)

      Chapter 9: Ray Optics and Optical Instruments
      A compound microscope consists of an objective lens of focal length 0.82 cm and an eyepiece lens of focal length 2.9 cm. An object is placed 0.91 cm from the objective lens. The image is formed at the near point (25 cm) from the eye. (I) Calculate the angular magnification of the microscope. (II) Draw the ray diagram of compound microscope in normal adjustment.

        Tests: Image formation and magnifying power of a compound microscope.

        Show solution

        (I)

        1. Objective: uo=−0.91u_o = -0.91 cm, fo=0.82f_o = 0.82 cm. 1vo=1fo+1uo=10.82−10.91\dfrac{1}{v_o} = \dfrac{1}{f_o} + \dfrac{1}{u_o} = \dfrac{1}{0.82} - \dfrac{1}{0.91}, so vo≈8.29v_o \approx 8.29 cm.
        2. mo=vouo=8.29−0.91≈−9.11m_o = \dfrac{v_o}{u_o} = \dfrac{8.29}{-0.91} \approx -9.11.
        3. Eyepiece, final image at the near point: me=1+Dfe=1+252.9≈9.62m_e = 1 + \dfrac{D}{f_e} = 1 + \dfrac{25}{2.9} \approx 9.62.
        4. M=mo×me≈−9.11×9.62≈−87.7M = m_o \times m_e \approx -9.11 \times 9.62 \approx -87.7.

          Why: The minus sign shows the final image is inverted.

        AnswerM ≈ −87.7 (magnifying power about 88)

        (II)

        1. Draw the object AB just beyond the focus Fₒ of the objective. Rays through the objective form a real, inverted, magnified image A′B′ at the focus Fₑ of the eyepiece.
        2. Rays from A′B′ leave the eyepiece parallel, so the final image A″B″ is at infinity (normal adjustment), inverted with respect to the object. Mark Fₒ, Fₑ, the objective and the eyepiece.
        AnswerIntermediate image at the eyepiece's focus; final image at infinity
        Ask about this question
        Q26

        Question 26 (3 marks)

        Chapter 10: Wave Optics
        Draw the reflected wave front for a plane wave front incident on a plane reflecting surface. Hence verify the laws of reflection using Huygen’s principle.
        1. VI
          For visually impaired candidates: (I) Define wave front. (II) Define wavelet. (III) What will be the shape of the wave front intercepted by a large reflecting type telescope on earth, due to a star far-away from our solar system?

        Tests: Huygens' principle and the law of reflection.

        Show solution

        1. Diagram: a plane wavefront AB strikes the reflecting surface XY at angle i; A touches the surface first. While the disturbance from B travels BC to the surface, a secondary wavelet from A spreads to radius AD = BC. The tangent CD from C to this wavelet is the reflected wavefront, making angle r with the surface.
        2. Both distances are covered in the same time τ\tau in the same medium: BC=vτBC = v\tau and AD=vτAD = v\tau, so AD=BCAD = BC.
        3. In right triangles ABC and CDA (right angles at B and D) the hypotenuse AC is common and BC=ADBC = AD, so the triangles are congruent: ∠BAC=∠DCA\angle BAC = \angle DCA, that is, i=ri = r.

          Why: The angle between a wavefront and the surface equals the angle between the ray and the normal.

        4. The incident ray, the normal and the reflected ray are all in the plane of the diagram, which is the second law.
        AnswerAD = BC, congruent triangles, i = r

        VI For visually impaired candidates: (I) Define wave front. (II) Define wavelet. (III) What will be the shape of the wave front intercepted by a large reflecting type telescope on earth, due to a star far-away from our solar system?

        1. (I) A wavefront is the surface (locus) of all points that oscillate in the same phase.
        2. (II) Each point of a wavefront acts as a new source sending out secondary waves in all directions; these are secondary wavelets.
        3. (III) Plane: a spherical wavefront from a very distant star is so large that any small part of it is flat.
        AnswerSurface of equal phase; secondary waves; plane
        Ask about this question
        Q27

        Question 27 (3 marks)

        Chapter 4: Moving Charges and Magnetism
        Attempt either option (I) or (II).
        1. (I)
          If a point sized object having charge 1 C and mass 1 g is projected with velocity of 2i^2\hat{i} m/s from a point (0, 2 cm, 0) in the region of magnetic field −0.1k^-0.1\hat{k} T which spreads in the first quadrant. (The figure shows X and Y axes with crosses, the field into the page, filling the first quadrant; the charge starts on the Y-axis at 2 cm, moving along +X.) (A) What will be the shape of the path followed by the given charged particle? (B) At what point it will cross the X-axis? (C) What will be the kinetic energy of particle when it will enter in the fourth quadrant?
        2. (II)
          OR: A solenoid has a core of material with relative permeability 200. The windings of the solenoid are insulated from the core and carry a current of 1 A. If the number of turns is 2000 per metre, calculate (A) magnetic intensity, (B) magnetic field and (C) magnetisation.

        Tests: Motion of a charge in a uniform magnetic field; H, B and M in a magnetic material.

        Show solution

        (I) If a point sized object having charge 1 C and mass 1 g is projected with velocity of 2i^2\hat{i} m/s from a point (0, 2 cm, 0) in the region of magnetic field −0.1k^-0.1\hat{k} T which spreads in the first quadrant. (The figure shows X and Y axes with crosses, the field into the page, filling the first quadrant; the charge starts on the Y-axis at 2 cm, moving along +X.) (A) What will be the shape of the path followed by the given charged particle? (B) At what point it will cross the X-axis? (C) What will be the kinetic energy of particle when it will enter in the fourth quadrant?

        1. Radius: r=mvqB=10−3×21×0.1=0.02r = \dfrac{mv}{qB} = \dfrac{10^{-3} \times 2}{1 \times 0.1} = 0.02 m =2= 2 cm.
        2. Direction: F⃗=q v⃗×B⃗=1×(2i^)×(−0.1k^)=+0.2 j^\vec F = q\,\vec v \times \vec B = 1 \times (2\hat i) \times (-0.1\hat k) = +0.2\,\hat j N. At the start the force points along +y, away from the X-axis, so the centre of the circle is at (0, 4 cm) and the particle turns anticlockwise.

          Why: î × k̂ = −ĵ, and the minus sign of the field flips it to +ĵ.

        3. (A) As printed, the path is a semicircle of radius 2 cm in the first quadrant, from (0, 2 cm) to (0, 6 cm); there it leaves the field and moves in a straight line along −x.
        4. (B) So it never reaches the X-axis; it leaves the field at (0, 6 cm). The marking scheme's answer (a clockwise quarter circle about the origin, crossing the X-axis at (2 cm, 0)) is what happens when the force points towards the X-axis, for example with the field out of the page (+0.1 k̂) or a negative charge. Write the direction check in the exam.
        5. (C) A magnetic force is always perpendicular to the velocity, so it does no work and the speed never changes: K=12mv2=12×10−3×22=2×10−3K = \tfrac{1}{2}mv^2 = \tfrac{1}{2} \times 10^{-3} \times 2^2 = 2 \times 10^{-3} J at every point (including on entering the fourth quadrant in the scheme's version).
        AnswerCircle of radius 2 cm (as printed, a semicircle leaving the field at (0, 6 cm), not crossing the X-axis); K=2×10−3K = 2 \times 10^{-3} J throughout

        (II) OR: A solenoid has a core of material with relative permeability 200. The windings of the solenoid are insulated from the core and carry a current of 1 A. If the number of turns is 2000 per metre, calculate (A) magnetic intensity, (B) magnetic field and (C) magnetisation.

        1. (A) H=nI=2000×1=2×103H = nI = 2000 \times 1 = 2 \times 10^3 A/m.
        2. (B) B=μ0μrH=4π×10−7×200×2000≈0.50B = \mu_0 \mu_r H = 4\pi \times 10^{-7} \times 200 \times 2000 \approx 0.50 T.
        3. (C) M=(μr−1)H=199×2000=3.98×105M = (\mu_r - 1)H = 199 \times 2000 = 3.98 \times 10^5 A/m.

          Why: χ = μr − 1 and M = χH.

        AnswerH=2×103H = 2 \times 10^3 A/m, B≈0.50B \approx 0.50 T, M≈3.98×105M \approx 3.98 \times 10^5 A/m
        Ask about this question
        Q28

        Question 28 (3 marks)

        Chapter 6: Electromagnetic Induction
        A conducting coil of 50 turns and area 5π\dfrac{5}{\pi} cm² is rotating along the axis of solenoid of length 50 cm and 2000 turns, carrying current of 5 A. What will be the value of maximum emf generated?

        Tests: Field of a solenoid and the emf of a coil rotating in a uniform field.

        Show solution
        1. Field inside the solenoid: n=20000.5=4000n = \dfrac{2000}{0.5} = 4000 turns/m, B=μ0nI=4π×10−7×4000×5=8π×10−3B = \mu_0 n I = 4\pi \times 10^{-7} \times 4000 \times 5 = 8\pi \times 10^{-3} T ≈0.025\approx 0.025 T.
        2. Flux linkage of the rotating coil: Nϕ=NBAcos⁡ωtN\phi = NBA\cos \omega t, with A=5π×10−4A = \dfrac{5}{\pi} \times 10^{-4} m². Its peak is NBA=50×8π×10−3×5π×10−4=2×10−4NBA = 50 \times 8\pi \times 10^{-3} \times \dfrac{5}{\pi} \times 10^{-4} = 2 \times 10^{-4} Wb.
        3. ε=−d(Nϕ)dt=NBAωsin⁡ωt\varepsilon = -\dfrac{d(N\phi)}{dt} = NBA\omega \sin \omega t, so εmax⁡=NBAω=(2×10−4 Wb)×ω\varepsilon_{\max} = NBA\omega = (2 \times 10^{-4}\ \text{Wb}) \times \omega.

          Why: The question does not give the angular speed ω, so the answer stays in terms of ω.

        4. For example, at ω=10\omega = 10 rad/s, εmax⁡=2\varepsilon_{\max} = 2 mV. (The marking scheme writes εmax⁡=NBA=2\varepsilon_{\max} = NBA = 2 mV, which drops ω\omega and uses B=8π×10−2B = 8\pi \times 10^{-2} T.)
        Answerεmax⁡=NBAω=2×10−4 ω\varepsilon_{\max} = NBA\omega = 2 \times 10^{-4}\,\omega V (ω in rad/s)
        Ask about this question

        Section D: 2 case study-based questions of 4 marks each

        Q29

        Question 29 (4 marks)

        Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits
        When an external voltage is applied across a semiconductor diode such that p-side is connected to the positive terminal of the battery and n-side to the negative terminal it is said to be forward biased. The applied voltage mostly drops across the depletion region and the voltage drop across the p-side and n-side of the junction is negligible. When an external voltage is applied across the diode such that n-side is positive and p-side is negative, it is said to be reverse biased. The applied voltage mostly drops across the depletion region.
        1. (I)
          Ge and Si diodes start conducting at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the value of V₀ changes by (assume that the Ge diode has large breakdown voltage). (Figure: a 12 V battery; a Ge diode and a Si diode in parallel, both forward biased; then a 5 kΩ resistor to ground; V₀ is the voltage across the 5 kΩ resistor.) (A) 0.2 V (B) 0.4 V (C) 0.6 V (D) 0.8 V
        2. (II)
          The value of V₀ and I_d for the network are: (Figure: 12 V → Si diode → Ge diode, both forward biased, in series → output V₀, with a 5.6 kΩ resistor from V₀ to ground.) (A) 13 V, 2.32 mA (B) 11.7 V, 2.08 mA (C) 11.3 V, 2.01 mA (D) 11 V, 1.96 mA
        3. (III)
          The circuit shown below contains two ideal diodes, each with a forward resistance of 50 Ω. If the battery voltage is 6 V, the current through the 100 Ω resistance (in amperes) is (Figure: three branches between a left and a right junction. Top: diode D₁ pointing right, in series with 150 Ω. Middle: diode D₂ pointing left, in series with 75 Ω. Bottom: the 6 V battery, positive plate on the left, in series with 100 Ω.) (A) 0.036 (B) 0.020 (C) 0.030 (D) 0.027
        4. (IV)
          In the figure, potential difference between A and B is (Figure: a 30 V battery, positive terminal at the top, in series with a 10 kΩ resistor leading to point A. From A, a 10 kΩ resistor goes down to B on the bottom wire. Also from A, a diode pointing away from A leads to a second 10 kΩ resistor down to the bottom wire, which returns to the battery.) (A) Zero (B) 5 V (C) 10 V (D) 15 V

        Tests: Diodes in circuits: cut-in voltage, forward and reverse bias.

        Show solution

        (I) Ge and Si diodes start conducting at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the value of V₀ changes by (assume that the Ge diode has large breakdown voltage). (Figure: a 12 V battery; a Ge diode and a Si diode in parallel, both forward biased; then a 5 kΩ resistor to ground; V₀ is the voltage across the 5 kΩ resistor.) (A) 0.2 V (B) 0.4 V (C) 0.6 V (D) 0.8 V

        1. With both diodes forward, the Ge diode turns on first at 0.3 V and holds the voltage there: V₀ = 12 − 0.3 = 11.7 V.
        2. With the Ge diode reversed it does not conduct, so current goes through the Si diode: V₀ = 12 − 0.7 = 11.3 V.
        3. Change = 11.7 − 11.3 = 0.4 V.
        Answer(B) 0.4 V

        (II) The value of V₀ and I_d for the network are: (Figure: 12 V → Si diode → Ge diode, both forward biased, in series → output V₀, with a 5.6 kΩ resistor from V₀ to ground.) (A) 13 V, 2.32 mA (B) 11.7 V, 2.08 mA (C) 11.3 V, 2.01 mA (D) 11 V, 1.96 mA

        1. In series both diodes conduct, each with its own drop: V₀ = 12 − 0.7 − 0.3 = 11 V.
        2. Id=V0R=115.6×103≈1.96I_d = \dfrac{V_0}{R} = \dfrac{11}{5.6 \times 10^3} \approx 1.96 mA.
        Answer(D) 11 V, 1.96 mA

        (III) The circuit shown below contains two ideal diodes, each with a forward resistance of 50 Ω. If the battery voltage is 6 V, the current through the 100 Ω resistance (in amperes) is (Figure: three branches between a left and a right junction. Top: diode D₁ pointing right, in series with 150 Ω. Middle: diode D₂ pointing left, in series with 75 Ω. Bottom: the 6 V battery, positive plate on the left, in series with 100 Ω.) (A) 0.036 (B) 0.020 (C) 0.030 (D) 0.027

        1. The battery drives current up the left side and from left to right through the upper branches. D₁ points left to right, so it is forward biased; D₂ points the other way, so it is reverse biased and carries no current.
        2. One loop: I=650+150+100=6300=0.02I = \dfrac{6}{50 + 150 + 100} = \dfrac{6}{300} = 0.02 A.
        Answer(B) 0.020

        (IV) In the figure, potential difference between A and B is (Figure: a 30 V battery, positive terminal at the top, in series with a 10 kΩ resistor leading to point A. From A, a 10 kΩ resistor goes down to B on the bottom wire. Also from A, a diode pointing away from A leads to a second 10 kΩ resistor down to the bottom wire, which returns to the battery.) (A) Zero (B) 5 V (C) 10 V (D) 15 V

        1. A is at a higher potential than the far side of the diode, so the diode is forward biased: treat it as a connecting wire.
        2. The two 10 kΩ resistors between A and B are then in parallel: 5 kΩ. Total resistance 10 + 5 = 15 kΩ, so I=3015×103=2I = \dfrac{30}{15 \times 10^3} = 2 mA.
        3. VAB=2×10−3×5×103=10V_{AB} = 2 \times 10^{-3} \times 5 \times 10^3 = 10 V.
        Answer(C) 10 V
        Ask about this question
        Q30

        Question 30 (4 marks)

        Chapter 11: Dual Nature of Radiation and Matter
        Photoelectric effect is phenomenon of the ejection of electrons when the radiation of suitable frequency is made to fall on the surface of a metal. When light of suitable wavelength falls on the emitter C given in the diagram, the photoelectrons are emitted. These photoelectrons are drawn to the collector A. The photoelectric current of the order of a few microamperes can be normally obtained from the device given in figure. The device given converts a change in intensity of illumination into a change in photocurrent. This current can be used to operate control systems and in light measuring devices. The devices are made up of metals with low ionization enthalpies, for example platinum whose work function is 6.35 eV. (Figure: an evacuated glass bulb with the emitter C and the collector A; light falls on C. C is wired to the negative end of a battery; A is wired through a microammeter (μA) to a sliding contact B on the battery, whose positive end is on the right.)
        1. (I)
          If infrared radiation of 3×10113 \times 10^{11} Hz is used as incident radiation, determine the reading of microammeter. Justify mathematically.
        2. (II)
          In the given diagram, if terminal B is shifted towards the left then how will it affect the reading of the microammeter?
        3. VI (II)
          For visually impaired candidates: If the supplied voltage is decreased, then what will be effect on the reading of the microammeter?
        4. (III)
          Plot a graph showing this variation in reading of microammeter on shifting the terminal B towards the right.
        5. VI (III)
          For visually impaired candidates: If the intensity of incident radiation is doubled, by what factor will the kinetic energy change?

        Tests: Threshold frequency, and how photocurrent depends on collector potential and intensity.

        Show solution

        (I) If infrared radiation of 3×10113 \times 10^{11} Hz is used as incident radiation, determine the reading of microammeter. Justify mathematically.

        1. Threshold frequency: ν0=W0h=6.35×1.6×10−196.63×10−34≈1.5×1015\nu_0 = \dfrac{W_0}{h} = \dfrac{6.35 \times 1.6 \times 10^{-19}}{6.63 \times 10^{-34}} \approx 1.5 \times 10^{15} Hz.
        2. 3×10113 \times 10^{11} Hz is far below ν0\nu_0 (each photon carries only about 1.2×10−31.2 \times 10^{-3} eV, against 6.35 eV needed), so no electron is emitted, whatever the intensity.
        3. So the microammeter reads zero.
        AnswerZero

        (II) In the given diagram, if terminal B is shifted towards the left then how will it affect the reading of the microammeter?

        1. Moving B to the left lowers the collector's positive (accelerating) potential relative to the emitter. Fewer of the emitted electrons reach A, so the photocurrent decreases (once below the saturation value).
        AnswerThe reading decreases

        VI (II) For visually impaired candidates: If the supplied voltage is decreased, then what will be effect on the reading of the microammeter?

        1. A lower accelerating voltage collects fewer of the emitted electrons, so the photocurrent decreases (once it is below saturation).
        AnswerThe reading decreases

        (III) Plot a graph showing this variation in reading of microammeter on shifting the terminal B towards the right.

        1. Shifting B to the right raises the collector potential. Plot photocurrent (y) against collector potential (x): the current rises with potential and then levels off at the saturation current, when every emitted electron is collected.
        AnswerCurrent rises, then flattens at saturation

        VI (III) For visually impaired candidates: If the intensity of incident radiation is doubled, by what factor will the kinetic energy change?

        1. Kmax⁡=hν−W0K_{\max} = h\nu - W_0 does not depend on intensity. Doubling the intensity doubles the number of photoelectrons, not their energy: the factor is 1 (no change).
        AnswerNo change (factor 1)
        Ask about this question

        Section E: 3 long answer questions of 5 marks each

        Q31

        Question 31 (5 marks)

        Chapter 2: Electrostatic Potential and Capacitance
        Attempt either option (I) or (II).
        1. (I)
          (A) A dielectric slab of thickness t, is introduced between the plates of parallel plate capacitor of area A and separation d (where t < d). Find an expression for the capacitance with the dielectric slab. (B) A copper sphere of capacitance C is dropped in ocean. Will the capacitance of the sphere increase, decrease or remain same? Justify. (C) A capacitor is connected across a source of potential difference V and then the separation ‘d’ between the plates is increased using insulating stick. Plot ‘V’ vs ‘d’ graph for the given capacitor.
        2. (I) VI
          For visually impaired candidates (in place of (I)(C)): A capacitor is connected across potential difference V and then separation between plates ‘d’ is increased using insulating stick. Will the energy stored in capacitor increase or decrease? Justify.
        3. (II)
          OR: (A) If a charge of 1 μC is placed at the origin and another charge of 3 μC placed at the point (20 m, 0 m, 0 m) in an external uniform electric field of 40 V/m i^\hat{i} with the electric potential at origin to be zero. Find the electrical potential energy of system. (B) If one charge particle is moved from A to C to B and another charge particle of equal magnitude is moved from A to D to B, in uniform external magnetic field, then for which charge particle more work will be needed? (The figure shows uniform horizontal field lines labelled E pointing right; A and D lie on a lower line with D to the right of A; B is higher up, to the right of A; one path curves from A up through C to B, the other runs right from A to D and then up to B.) (C) Electrostatic potential is constant throughout the volume of conductor and has the same value on its surface. Why?
        4. (II) VI
          For visually impaired candidates (in place of (II)(B)/(C)): If a charge particle is taken from A to B along two different paths, one path has resistance of 10 Ω and another has capacitance of 3 μF. Work done by which path will be more?

        Tests: Capacitance with a dielectric; potential energy of charges in an external field; conservative fields.

        Show solution

        (I) (A) A dielectric slab of thickness t, is introduced between the plates of parallel plate capacitor of area A and separation d (where t < d). Find an expression for the capacitance with the dielectric slab. (B) A copper sphere of capacitance C is dropped in ocean. Will the capacitance of the sphere increase, decrease or remain same? Justify. (C) A capacitor is connected across a source of potential difference V and then the separation ‘d’ between the plates is increased using insulating stick. Plot ‘V’ vs ‘d’ graph for the given capacitor.

        1. (A) Without the slab, C0=ε0AdC_0 = \dfrac{\varepsilon_0 A}{d}. With charge qq on the plates, the field in the air gaps is E0=σε0=qε0AE_0 = \dfrac{\sigma}{\varepsilon_0} = \dfrac{q}{\varepsilon_0 A}; inside the slab, polarisation reduces it to E=E0KE = \dfrac{E_0}{K}.
        2. V=E0(d−t)+E0Kt=qε0A(d−t+tK)V = E_0(d - t) + \dfrac{E_0}{K}t = \dfrac{q}{\varepsilon_0 A}\left(d - t + \dfrac{t}{K}\right).
        3. C=qV=ε0Ad−t+tKC = \dfrac{q}{V} = \dfrac{\varepsilon_0 A}{d - t + \dfrac{t}{K}}.

          Why: Check: t = 0 gives ε₀A/d; t = d gives Kε₀A/d.

        4. (B) It increases. For an isolated sphere C=4πε0KRC = 4\pi\varepsilon_0 K R: the water (taken as a dielectric with K≈80K \approx 80) is polarised, which reduces the field and the potential for the same charge, so C=q/VC = q/V rises (about 80 times).
        5. (C) While the capacitor stays connected, the source fixes the voltage: V stays the same as d increases, so the graph is a horizontal straight line. (If it were disconnected first, Q would be fixed and V=Qdε0AV = \dfrac{Qd}{\varepsilon_0 A} would rise linearly with d: a straight line through the origin, the graph the marking scheme draws.)
        AnswerC=ε0Ad−t+t/KC = \dfrac{\varepsilon_0 A}{d - t + t/K}; increases; V constant (horizontal line) while connected

        (I) VI For visually impaired candidates (in place of (I)(C)): A capacitor is connected across potential difference V and then separation between plates ‘d’ is increased using insulating stick. Will the energy stored in capacitor increase or decrease? Justify.

        1. Increasing d lowers C=ε0AdC = \dfrac{\varepsilon_0 A}{d}. With the source still connected, V is fixed, so U=12CV2U = \tfrac{1}{2}CV^2 decreases (charge flows back to the source).
        2. (If the capacitor had been disconnected first, Q would be fixed and U=Q22CU = \dfrac{Q^2}{2C} would increase, the extra energy coming from the work done in pulling the plates apart.)
        AnswerDecreases (V fixed, C falls)

        (II) OR: (A) If a charge of 1 μC is placed at the origin and another charge of 3 μC placed at the point (20 m, 0 m, 0 m) in an external uniform electric field of 40 V/m i^\hat{i} with the electric potential at origin to be zero. Find the electrical potential energy of system. (B) If one charge particle is moved from A to C to B and another charge particle of equal magnitude is moved from A to D to B, in uniform external magnetic field, then for which charge particle more work will be needed? (The figure shows uniform horizontal field lines labelled E pointing right; A and D lie on a lower line with D to the right of A; B is higher up, to the right of A; one path curves from A up through C to B, the other runs right from A to D and then up to B.) (C) Electrostatic potential is constant throughout the volume of conductor and has the same value on its surface. Why?

        1. (A) In a uniform field along +x+x the potential falls along the field: V(x)=V(0)−Ex=−40xV(x) = V(0) - Ex = -40x. So V(0)=0V(0) = 0 and V(20 m)=−800V(20\text{ m}) = -800 V.

          Why: E = −dV/dx.

        2. U=kq1q2r+q1V(0)+q2V(20)=9×109×10−6×3×10−620+0+3×10−6×(−800)U = \dfrac{kq_1q_2}{r} + q_1V(0) + q_2V(20) = \dfrac{9 \times 10^9 \times 10^{-6} \times 3 \times 10^{-6}}{20} + 0 + 3 \times 10^{-6} \times (-800).
        3. U=1.35×10−3−2.4×10−3=−1.05×10−3U = 1.35 \times 10^{-3} - 2.4 \times 10^{-3} = -1.05 \times 10^{-3} J.
        4. (B) The same work for both. The field shown is an electrostatic field, which is conservative: the work depends only on the end points A and B, not on the path. (For a magnetic field, as the question words it, the magnetic force does no work at all, so again neither path needs more.)
        5. (C) Inside a conductor in electrostatic equilibrium the field is zero, so no work is done in moving a test charge anywhere inside or on to the surface: the potential is the same everywhere, equal to its value on the surface.
        AnswerU=−1.05×10−3U = -1.05 \times 10^{-3} J; same work on both paths; E = 0 inside a conductor

        (II) VI For visually impaired candidates (in place of (II)(B)/(C)): If a charge particle is taken from A to B along two different paths, one path has resistance of 10 Ω and another has capacitance of 3 μF. Work done by which path will be more?

        1. In an electrostatic field the work done in moving a charge from A to B is W=q(VB−VA)W = q(V_B - V_A): it depends only on the end points. Both paths need the same work.
        AnswerSame on both paths
        Ask about this question
        Q32

        Question 32 (5 marks)

        Chapter 9: Ray Optics and Optical Instruments
        Attempt either option (I) or (II).
        1. (I)
          (A) Derive lens maker’s formula. (B) Equi-convex lenses are to be manufactured from a glass of refractive index 1.55, with both faces of the same radius of curvature. What is the radius of curvature required if the focal length is to be 10 cm?
        2. (II)
          OR: (A) Define angle of deviation in a prism. (B) Obtain the relation A + δ = i + e for a prism where A is the angle of prism, δ is the angle of deviation, i is the angle of incidence and e is the angle of emergence. Write this relation for the minimum deviation. (C) Write the condition for minimum deviation.

        Tests: Lens maker's formula; refraction through a prism and minimum deviation.

        Show solution

        (I) (A) Derive lens maker’s formula. (B) Equi-convex lenses are to be manufactured from a glass of refractive index 1.55, with both faces of the same radius of curvature. What is the radius of curvature required if the focal length is to be 10 cm?

        1. (A) Thin lens of refractive index n2n_2 in a medium n1n_1, object O on the axis. Refraction at the first surface (radius R1R_1) alone would form an image I1I_1 at v1v_1: n2v1−n1u=n2−n1R1\dfrac{n_2}{v_1} - \dfrac{n_1}{u} = \dfrac{n_2 - n_1}{R_1}.
        2. I1I_1 acts as the object for the second surface (radius R2R_2), which forms the final image at vv: n1v−n2v1=n1−n2R2\dfrac{n_1}{v} - \dfrac{n_2}{v_1} = \dfrac{n_1 - n_2}{R_2}.

          Why: For a thin lens, distances are measured from the same optical centre.

        3. Adding: n1v−n1u=(n2−n1)(1R1−1R2)\dfrac{n_1}{v} - \dfrac{n_1}{u} = (n_2 - n_1)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right). With n21=n2n1n_{21} = \dfrac{n_2}{n_1}: 1v−1u=(n21−1)(1R1−1R2)\dfrac{1}{v} - \dfrac{1}{u} = (n_{21} - 1)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right).
        4. For an object at infinity the image is at the focus (u=−∞u = -\infty, v=fv = f): 1f=(n21−1)(1R1−1R2)\dfrac{1}{f} = (n_{21} - 1)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right), the lens maker's formula.
        5. (B) Equiconvex: R1=RR_1 = R, R2=−RR_2 = -R. 110=(1.55−1)2R\dfrac{1}{10} = (1.55 - 1)\dfrac{2}{R}, so R=2×0.55×10=11R = 2 \times 0.55 \times 10 = 11 cm.
        Answer1f=(n−1)(1R1−1R2)\dfrac{1}{f} = (n - 1)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right); R = 11 cm

        (II) OR: (A) Define angle of deviation in a prism. (B) Obtain the relation A + δ = i + e for a prism where A is the angle of prism, δ is the angle of deviation, i is the angle of incidence and e is the angle of emergence. Write this relation for the minimum deviation. (C) Write the condition for minimum deviation.

        1. (A) The angle of deviation is the angle between the direction of the incident ray and the direction of the emergent ray.
        2. (B) Draw the ray PQRS through prism ABC, with normals at Q and R meeting at N, and refraction angles r1r_1 and r2r_2. In quadrilateral AQNR the angles at Q and R are right angles, so A+∠QNR=180∘A + \angle QNR = 180^\circ. In triangle QNR, r1+r2+∠QNR=180∘r_1 + r_2 + \angle QNR = 180^\circ. So A=r1+r2A = r_1 + r_2.
        3. Deviation at the two faces: δ=(i−r1)+(e−r2)=i+e−A\delta = (i - r_1) + (e - r_2) = i + e - A, so A+δ=i+eA + \delta = i + e.
        4. At minimum deviation i=ei = e and r1=r2=rr_1 = r_2 = r: A+δm=2iA + \delta_m = 2i, and r=A2r = \dfrac{A}{2}.
        5. (C) At minimum deviation the angle of incidence equals the angle of emergence (r₁ = r₂), and the ray inside the prism is parallel to its base.
        AnswerA+δ=i+eA + \delta = i + e; at minimum deviation A+δm=2iA + \delta_m = 2i, with i=ei = e
        Ask about this question
        Q33

        Question 33 (5 marks)

        Chapter 4: Moving Charges and Magnetism
        Attempt either option (I) or (II).
        1. (I)
          (A) State the working principle of a moving coil galvanometer. What modification is required in the galvanometer to make its scale linear? (B) If a galvanometer of resistance 49.5 Ω has range of 0.05 A, what will be the value of resistance needed to convert it in ammeter of range 5 A? (C) How these two resistors should be connected to galvanometer in both cases?
        2. (II)
          OR: (A) An input potential Vin=200sin⁡100πtV_{in} = 200 \sin 100\pi t V is provided to an ideal transformer having 1000 turns in primary coil and 100 turns in secondary coil as shown in figure. The load circuit has a resistance of 4 Ω, a capacitive reactance of 2 Ω and an inductive reactance of 6 Ω. (The figure shows an AC source across the primary, an iron core, and the secondary connected to R, L and C in series.) Find: (i) the output voltage across the load circuit (ii) the current flowing through the load circuit (iii) the power supplied to the load circuit by the transformer. (B) State the working principle of a transformer and explain how it is a key component in the transfer of electrical power over long distances.

        Tests: Moving coil galvanometer and its conversion; transformer and an LCR load.

        Show solution

        (I) (A) State the working principle of a moving coil galvanometer. What modification is required in the galvanometer to make its scale linear? (B) If a galvanometer of resistance 49.5 Ω has range of 0.05 A, what will be the value of resistance needed to convert it in ammeter of range 5 A? (C) How these two resistors should be connected to galvanometer in both cases?

        1. (A) A current-carrying coil in a magnetic field feels a torque τ=NIAB\tau = NIAB; it turns until the spring's restoring torque kϕk\phi balances it.
        2. For a linear scale the field must be radial, so the plane of the coil is always along the field: use concave (cylindrical) pole pieces and a soft-iron core inside the coil. Then ϕ=NABkI\phi = \dfrac{NAB}{k}I, so ϕ∝I\phi \propto I.
        3. (B) Shunt: IgG=(I−Ig)SI_g G = (I - I_g)S, so S=IgGI−Ig=0.05×49.55−0.05=2.4754.95=0.5 ΩS = \dfrac{I_g G}{I - I_g} = \dfrac{0.05 \times 49.5}{5 - 0.05} = \dfrac{2.475}{4.95} = 0.5\ \Omega.
        4. (C) To make an ammeter, the low resistance (shunt) is connected in parallel with the galvanometer; to make a voltmeter, a high resistance is connected in series with it.
        AnswerTorque on a coil in a radial field; S = 0.5 Ω in parallel (ammeter), high R in series (voltmeter)

        (II) OR: (A) An input potential Vin=200sin⁡100πtV_{in} = 200 \sin 100\pi t V is provided to an ideal transformer having 1000 turns in primary coil and 100 turns in secondary coil as shown in figure. The load circuit has a resistance of 4 Ω, a capacitive reactance of 2 Ω and an inductive reactance of 6 Ω. (The figure shows an AC source across the primary, an iron core, and the secondary connected to R, L and C in series.) Find: (i) the output voltage across the load circuit (ii) the current flowing through the load circuit (iii) the power supplied to the load circuit by the transformer. (B) State the working principle of a transformer and explain how it is a key component in the transfer of electrical power over long distances.

        1. (i) VsVp=NsNp=1001000=0.1\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} = \dfrac{100}{1000} = 0.1, so Vout=20sin⁡100πtV_{out} = 20 \sin 100\pi t V.
        2. (ii) Z=R2+(XL−XC)2=42+(6−2)2=42 ΩZ = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{4^2 + (6 - 2)^2} = 4\sqrt{2}\ \Omega; Im=2042=52≈3.54I_m = \dfrac{20}{4\sqrt 2} = \dfrac{5}{\sqrt 2} \approx 3.54 A.
        3. XL>XCX_L > X_C, so the circuit is inductive and the current lags: tan⁡ϕ=XL−XCR=1\tan\phi = \dfrac{X_L - X_C}{R} = 1, ϕ=π4\phi = \dfrac{\pi}{4}. I=3.54sin⁡(100πt−π4)I = 3.54 \sin\left(100\pi t - \dfrac{\pi}{4}\right) A.

          Why: Current lags in an inductive circuit.

        4. (iii) P=VrmsIrmscos⁡ϕ=VmIm2cos⁡ϕ=20×3.542×12=25P = V_{rms} I_{rms} \cos\phi = \dfrac{V_m I_m}{2}\cos\phi = \dfrac{20 \times 3.54}{2} \times \dfrac{1}{\sqrt 2} = 25 W. Check: Irms2R=2.52×4=25I_{rms}^2 R = 2.5^2 \times 4 = 25 W.
        5. (B) A transformer works on mutual induction: the changing current in the primary changes the flux in the core, which induces an emf in the secondary.
        6. For transmission, the voltage is stepped up at the power station, so the same power P=VIP = VI is sent with a much smaller current. The loss in the lines, I2RI^2R, falls sharply. Near the consumers the voltage is stepped down again.
        Answer20sin⁡100πt20 \sin 100\pi t V; I=3.54sin⁡(100πt−π/4)I = 3.54 \sin(100\pi t - \pi/4) A; 25 W
        Ask about this question

        Questions are quoted from the CBSE Class 12 Physics Sample Question Paper 2025-26 (subject code 042); figures are described in words. Every final answer is checked against the official CBSE marking scheme. Where a question offers a choice, both options are solved.

        Question papers are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to CBSE. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.