AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2015 Paper 2: Question Paper with Solutions and Answer Key

All 60 questions of JEE Advanced 2015 Paper 2 solved step by step: Physics, Chemistry and Mathematics, with the official answer key and the marking of each section. Every final answer is checked against the official answer key.

JEE (Advanced) 2015 Paper 2: 60 questions, 240 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2015: Paper 1.

Physics, Section 1: 8 questions, answer is a single digit integer from 0 to 9: +4 if the correct integer is darkened, 0 in all other cases

Q1

Physics, Question 1 (4 marks)

Gravitation · +4
A large spherical mass MM is fixed at one position and two identical point masses mm are kept on a line passing through the centre of MM (see figure). The point masses are connected by a rigid massless rod of length ll and this assembly is free to move along the line connecting them. All three masses interact only through their mutual gravitational interaction. When the point mass nearer to MM is at a distance r=3lr = 3l from MM, the tension in the rod is zero for m=k(M288)m = k\left(\dfrac{M}{288}\right). The value of kk is (The figure shows MM, then the near mass mm at distance rr from the centre of MM, then the far mass mm a further ll along the same line.)

Tests: Use equal accelerations of rigidly linked bodies to find when the link carries no force.

Show solution
  1. Zero tension means each point mass, under gravity alone, has the same acceleration (the rod is rigid). Take "towards MM" as positive.
  2. Near mass (at 3l3l): pulled towards MM by MM, pulled away by the far mass. a1=GM9l2−Gml2a_1 = \dfrac{GM}{9l^2} - \dfrac{Gm}{l^2}.
  3. Far mass (at 4l4l): pulled towards MM by both. a2=GM16l2+Gml2a_2 = \dfrac{GM}{16l^2} + \dfrac{Gm}{l^2}.
  4. a1=a2a_1 = a_2: GM9−GM16=2Gm⇒7M144=2m⇒m=7M288\dfrac{GM}{9} - \dfrac{GM}{16} = 2Gm \Rightarrow \dfrac{7M}{144} = 2m \Rightarrow m = \dfrac{7M}{288}.
  5. So k=7k = 7.
AnswerAnswer: 7
Ask about this question
Q2

Physics, Question 2 (4 marks)

Errors in measurement · +4
The energy of a system as a function of time tt is given as E(t)=A2exp⁡(−αt)E(t) = A^2 \exp(-\alpha t), where α=0.2 s−1\alpha = 0.2\ \mathrm{s^{-1}}. The measurement of AA has an error of 1.25%. If the error in the measurement of time is 1.50%, the percentage error in the value of E(t)E(t) at t=5t = 5 s is

Tests: Propagate percentage errors through a power and an exponential.

Show solution
  1. Take logs: ln⁡E=2ln⁡A−αt\ln E = 2\ln A - \alpha t. Differentiate and add the magnitudes: ΔEE=2ΔAA+α Δt\dfrac{\Delta E}{E} = 2\dfrac{\Delta A}{A} + \alpha\,\Delta t.

    Why: Maximum error: every contribution adds.

  2. α Δt=αt⋅Δtt=0.2×5×0.015=0.015\alpha\,\Delta t = \alpha t \cdot \dfrac{\Delta t}{t} = 0.2 \times 5 \times 0.015 = 0.015, i.e. 1.5%.
  3. ΔEE=2(1.25%)+1.5%=4%\dfrac{\Delta E}{E} = 2(1.25\%) + 1.5\% = 4\%.
AnswerAnswer: 4
Ask about this question
Q3

Physics, Question 3 (4 marks)

Moment of inertia · +4
The densities of two solid spheres AA and BB of the same radii RR vary with radial distance rr as ρA(r)=k(rR)\rho_A(r) = k\left(\dfrac{r}{R}\right) and ρB(r)=k(rR)5\rho_B(r) = k\left(\dfrac{r}{R}\right)^5, respectively, where kk is a constant. The moments of inertia of the individual spheres about axes passing through their centres are IAI_A and IBI_B, respectively. If IBIA=n10\dfrac{I_B}{I_A} = \dfrac{n}{10}, the value of nn is

Tests: Find the moment of inertia of a sphere with radially varying density by adding thin shells.

Show solution
  1. Split each sphere into thin shells: a shell of radius rr and mass dm=ρ 4πr2 drdm = \rho\,4\pi r^2\,dr has dI=23r2 dm=8π3ρ r4 drdI = \dfrac{2}{3}r^2\,dm = \dfrac{8\pi}{3}\rho\,r^4\,dr.
  2. IA=8πk3R∫0Rr5 dr=8πk3⋅R56I_A = \dfrac{8\pi k}{3R}\displaystyle\int_0^R r^5\,dr = \dfrac{8\pi k}{3}\cdot\dfrac{R^5}{6}.
  3. IB=8πk3R5∫0Rr9 dr=8πk3⋅R510I_B = \dfrac{8\pi k}{3R^5}\displaystyle\int_0^R r^9\,dr = \dfrac{8\pi k}{3}\cdot\dfrac{R^5}{10}.
  4. IBIA=610\dfrac{I_B}{I_A} = \dfrac{6}{10}, so n=6n = 6.
AnswerAnswer: 6
Ask about this question
Q4

Physics, Question 4 (4 marks)

Superposition of waves · +4
Four harmonic waves of equal frequencies and equal intensities I0I_0 have phase angles 00, π/3\pi/3, 2π/32\pi/3 and π\pi. When they are superposed, the intensity of the resulting wave is nI0nI_0. The value of nn is

Tests: Add waves of equal frequency as phasors and convert amplitude to intensity.

Show solution
  1. Each wave has amplitude aa with I0∝a2I_0 \propto a^2. Add the four phasors of length aa at angles 0∘,60∘,120∘,180∘0^\circ, 60^\circ, 120^\circ, 180^\circ.
  2. Horizontal: a(1+12−12−1)=0a(1 + \tfrac{1}{2} - \tfrac{1}{2} - 1) = 0. Vertical: a(0+32+32+0)=3aa(0 + \tfrac{\sqrt{3}}{2} + \tfrac{\sqrt{3}}{2} + 0) = \sqrt{3}a.
  3. Resultant amplitude 3a\sqrt{3}a, so intensity =3I0= 3I_0 and n=3n = 3.
AnswerAnswer: 3
Ask about this question
Q5

Physics, Question 5 (4 marks)

Radioactivity · +4
For a radioactive material, its activity AA and rate of change of its activity RR are defined as A=−dNdtA = -\dfrac{dN}{dt} and R=−dAdtR = -\dfrac{dA}{dt}, where N(t)N(t) is the number of nuclei at time tt. Two radioactive sources PP (mean life τ\tau) and QQ (mean life 2τ2\tau) have the same activity at t=0t = 0. Their rates of change of activities at t=2τt = 2\tau are RPR_P and RQR_Q, respectively. If RPRQ=ne\dfrac{R_P}{R_Q} = \dfrac{n}{e}, then the value of nn is

Tests: Use exponential decay of activity and the link between mean life and decay constant.

Show solution
  1. A=λNA = \lambda N decays like NN: A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}, so R=−dAdt=λA0e−λtR = -\dfrac{dA}{dt} = \lambda A_0 e^{-\lambda t}, with λ=1/mean life\lambda = 1/\text{mean life}.
  2. PP: λ=1/τ\lambda = 1/\tau, RP=A0τe−2R_P = \dfrac{A_0}{\tau}e^{-2}. QQ: λ=1/(2τ)\lambda = 1/(2\tau), RQ=A02τe−1R_Q = \dfrac{A_0}{2\tau}e^{-1}.
  3. RPRQ=2e−1=2e\dfrac{R_P}{R_Q} = 2e^{-1} = \dfrac{2}{e}, so n=2n = 2.
AnswerAnswer: 2
Ask about this question
Q6

Physics, Question 6 (4 marks)

Refraction through a prism · +4
A monochromatic beam of light is incident at 60∘60^\circ on one face of an equilateral prism of refractive index nn and emerges from the opposite face making an angle θ(n)\theta(n) with the normal (see the figure). For n=3n = \sqrt{3} the value of θ\theta is 60∘60^\circ and dθdn=m\dfrac{d\theta}{dn} = m. The value of mm is (The figure shows the ray entering the left face at 60∘60^\circ to its normal, crossing the prism, and leaving the right face at θ\theta to that face's normal.)

Tests: Differentiate the prism equations to see how the emergent angle changes with refractive index.

Show solution
  1. Prism relations (A=60∘A = 60^\circ): sin⁡60∘=nsin⁡r1\sin 60^\circ = n\sin r_1, r1+r2=60∘r_1 + r_2 = 60^\circ, sin⁡θ=nsin⁡r2\sin\theta = n\sin r_2.
  2. At n=3n = \sqrt{3}: sin⁡r1=12\sin r_1 = \tfrac{1}{2}, so r1=r2=30∘r_1 = r_2 = 30^\circ and θ=60∘\theta = 60^\circ (minimum deviation).
  3. Differentiate the first relation (incidence fixed): 0=sin⁡r1 dn+ncos⁡r1 dr1⇒dr1=−1/23⋅3/2 dn=−dn30 = \sin r_1\,dn + n\cos r_1\,dr_1 \Rightarrow dr_1 = -\dfrac{1/2}{\sqrt{3}\cdot\sqrt{3}/2}\,dn = -\dfrac{dn}{3}, so dr2=+dn3dr_2 = +\dfrac{dn}{3}.
  4. Differentiate the third: cos⁡θ dθ=sin⁡r2 dn+ncos⁡r2 dr2=12dn+3⋅32⋅13dn=dn\cos\theta\,d\theta = \sin r_2\,dn + n\cos r_2\,dr_2 = \tfrac{1}{2}dn + \sqrt{3}\cdot\tfrac{\sqrt{3}}{2}\cdot\tfrac{1}{3}dn = dn.
  5. cos⁡60∘=12\cos 60^\circ = \tfrac{1}{2}, so dθdn=2\dfrac{d\theta}{dn} = 2 (per unit nn, in radians). m=2m = 2.
AnswerAnswer: 2
Ask about this question
Q7

Physics, Question 7 (4 marks)

Current electricity (Wheatstone bridge) · +4
In the following circuit, the current through the resistor R (=2 Ω)R\ (= 2\,\Omega) is II Amperes. The value of II is (The figure: a 6.5 V battery on the left. From its top, R=2 ΩR = 2\,\Omega leads to node AA. AA joins node BB (top right) through 1 Ω1\,\Omega and node CC (below AA) through 6 Ω6\,\Omega. BB joins node DD (below BB) through 2 Ω2\,\Omega; CC joins DD through 10 Ω10\,\Omega. A star sits inside the square ABDCABDC: a centre point OO joined to AA by 2 Ω2\,\Omega, to BB by 8 Ω8\,\Omega and to DD by 4 Ω4\,\Omega. Below, CC goes to the bottom wire through 12 Ω12\,\Omega and DD through 4 Ω4\,\Omega; the bottom wire returns to the battery.)

Tests: Reduce a network with star-delta conversion and spot a balanced Wheatstone bridge.

Show solution
  1. Replace the star at OO (2,8,4 Ω2, 8, 4\,\Omega to A,B,DA, B, D) by a delta. Σ=2⋅8+8⋅4+4⋅2=56\Sigma = 2\cdot 8 + 8\cdot 4 + 4\cdot 2 = 56: RAB=56/4=14R_{AB} = 56/4 = 14, RBD=56/2=28R_{BD} = 56/2 = 28, RAD=56/8=7 ΩR_{AD} = 56/8 = 7\,\Omega.

    Why: The delta resistor between two nodes is Σ divided by the star arm on the third node.

  2. AA-BB: 1∥14=14151 \parallel 14 = \tfrac{14}{15}. BB-DD: 2∥28=28152 \parallel 28 = \tfrac{28}{15}. In series: 4215=2.8\tfrac{42}{15} = 2.8. With RAD=7R_{AD} = 7 in parallel: 2.8×79.8=2 Ω\dfrac{2.8 \times 7}{9.8} = 2\,\Omega between AA and DD.
  3. Now AA to the bottom wire EE is a bridge: AC=6AC = 6, CE=12CE = 12, AD=2AD = 2, DE=4DE = 4, with 10 Ω10\,\Omega across CDCD. 612=24\dfrac{6}{12} = \dfrac{2}{4}: balanced, so no current in 10 Ω10\,\Omega.
  4. RAE=(6+12)∥(2+4)=18∥6=4.5 ΩR_{AE} = (6 + 12) \parallel (2 + 4) = 18 \parallel 6 = 4.5\,\Omega. Total =2+4.5=6.5 Ω= 2 + 4.5 = 6.5\,\Omega.
  5. I=6.56.5=1I = \dfrac{6.5}{6.5} = 1 A, all of it through RR.
AnswerAnswer: 1
Ask about this question
Q8

Physics, Question 8 (4 marks)

Bohr model and de Broglie waves · +4
An electron in an excited state of Li2+\mathrm{Li^{2+}} ion has angular momentum 3h/2π3h/2\pi. The de Broglie wavelength of the electron in this state is pπa0p\pi a_0 (where a0a_0 is the Bohr radius). The value of pp is

Tests: Combine Bohr quantisation with the de Broglie standing-wave picture of an orbit.

Show solution
  1. L=nh/2πL = nh/2\pi gives n=3n = 3; for Li2+\mathrm{Li^{2+}}, Z=3Z = 3.
  2. Orbit radius rn=a0n2Z=a093=3a0r_n = a_0\dfrac{n^2}{Z} = a_0\dfrac{9}{3} = 3a_0.
  3. Bohr's condition: nn wavelengths fit the orbit, nλ=2πrnn\lambda = 2\pi r_n. So λ=2π⋅3a03=2πa0\lambda = \dfrac{2\pi \cdot 3a_0}{3} = 2\pi a_0.
  4. p=2p = 2.
AnswerAnswer: 2
Ask about this question

Physics, Section 2: 8 questions, one or more options correct: +4 if only all the correct options are darkened, 0 if none is darkened, −2 in all other cases

Q9

Physics, Question 9 (4 marks)

Viscosity and buoyancy · +4 / −2
Two spheres PP and QQ of equal radii have densities ρ1\rho_1 and ρ2\rho_2, respectively. The spheres are connected by a massless string and placed in liquids L1L_1 and L2L_2 of densities σ1\sigma_1 and σ2\sigma_2 and viscosities η1\eta_1 and η2\eta_2, respectively. They float in equilibrium with the sphere PP in L1L_1 and sphere QQ in L2L_2 and the string being taut (see figure). If sphere PP alone in L2L_2 has terminal velocity V⃗P\vec{V}_P and QQ alone in L1L_1 has terminal velocity V⃗Q\vec{V}_Q, then (The figure shows a beaker with liquid L1L_1 layered above liquid L2L_2; PP is fully inside L1L_1, QQ fully inside L2L_2 directly below it, joined by the string.)
  1. (A)∣V⃗P∣∣V⃗Q∣=η1η2\dfrac{|\vec{V}_P|}{|\vec{V}_Q|} = \dfrac{\eta_1}{\eta_2}
  2. (B)∣V⃗P∣∣V⃗Q∣=η2η1\dfrac{|\vec{V}_P|}{|\vec{V}_Q|} = \dfrac{\eta_2}{\eta_1}
  3. (C)V⃗P⋅V⃗Q>0\vec{V}_P \cdot \vec{V}_Q > 0
  4. (D)V⃗P⋅V⃗Q<0\vec{V}_P \cdot \vec{V}_Q < 0

Tests: Combine floating equilibrium with Stokes' law to compare terminal velocities.

Show solution
  1. Equal volumes VV. Whole system in equilibrium: (ρ1+ρ2)Vg=(σ1+σ2)Vg(\rho_1 + \rho_2)Vg = (\sigma_1 + \sigma_2)Vg, so σ2−ρ1=ρ2−σ1\sigma_2 - \rho_1 = \rho_2 - \sigma_1.
  2. String taut: PP alone would rise in L1L_1 (ρ1<σ1\rho_1 < \sigma_1) and QQ alone would sink in L2L_2 (ρ2>σ2\rho_2 > \sigma_2). L1L_1 floats on L2L_2, so σ1<σ2\sigma_1 < \sigma_2. Hence ρ1<σ1<σ2<ρ2\rho_1 < \sigma_1 < \sigma_2 < \rho_2.
  3. PP in L2L_2: σ2>ρ1\sigma_2 > \rho_1, it rises. Terminal: 6πη2r∣V⃗P∣=(σ2−ρ1)Vg6\pi\eta_2 r|\vec{V}_P| = (\sigma_2 - \rho_1)Vg. QQ in L1L_1: ρ2>σ1\rho_2 > \sigma_1, it sinks: 6πη1r∣V⃗Q∣=(ρ2−σ1)Vg6\pi\eta_1 r|\vec{V}_Q| = (\rho_2 - \sigma_1)Vg.
  4. The right sides are equal, so η2∣V⃗P∣=η1∣V⃗Q∣\eta_2|\vec{V}_P| = \eta_1|\vec{V}_Q|: ∣V⃗P∣∣V⃗Q∣=η1η2\dfrac{|\vec{V}_P|}{|\vec{V}_Q|} = \dfrac{\eta_1}{\eta_2}. (A) true, (B) false.
  5. V⃗P\vec{V}_P is up and V⃗Q\vec{V}_Q is down, so V⃗P⋅V⃗Q<0\vec{V}_P \cdot \vec{V}_Q < 0. (D) true, (C) false.
AnswerAnswer: (A), (D)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Dimensional analysis · +4 / −2
In terms of potential difference VV, electric current II, permittivity ε0\varepsilon_0, permeability μ0\mu_0 and speed of light cc, the dimensionally correct equation(s) is(are)
  1. (A)μ0I2=ε0V2\mu_0 I^2 = \varepsilon_0 V^2
  2. (B)ε0I=μ0V\varepsilon_0 I = \mu_0 V
  3. (C)I=ε0cVI = \varepsilon_0 c V
  4. (D)μ0cI=ε0V\mu_0 c I = \varepsilon_0 V

Tests: Check electromagnetic dimensional equations using known formulas and μ0ε0c² = 1.

Show solution
  1. (A): force between parallel wires F=μ0I2l2πdF = \dfrac{\mu_0 I^2 l}{2\pi d}, so μ0I2\mu_0 I^2 is a force. Energy density 12ε0E2\tfrac{1}{2}\varepsilon_0 E^2 is energy per volume and V=EdV = Ed, so ε0V2\varepsilon_0 V^2 is energy per length, also a force. True.
  2. (C): Q=CVQ = CV with C=ε0S/dC = \varepsilon_0 S/d, so ε0V\varepsilon_0 V has the dimensions of charge per length. Times cc (length per time): charge per time = current. True.
  3. Using (C) and μ0ε0c2=1\mu_0\varepsilon_0 c^2 = 1: μ0cI\mu_0 c I has the dimension of μ0c⋅ε0cV=V\mu_0 c \cdot \varepsilon_0 c V = V, not ε0V\varepsilon_0 V. (D) false.
  4. (B): ε0I∼ε02cV\varepsilon_0 I \sim \varepsilon_0^2 c V while μ0V=Vε0c2\mu_0 V = \dfrac{V}{\varepsilon_0 c^2}; they differ by ε03c3\varepsilon_0^3 c^3, not dimensionless. False.
AnswerAnswer: (A), (C)
Ask about this question
Q11

Physics, Question 11 (4 marks)

Electric field (Gauss's law) · +4 / −2
Consider a uniform spherical charge distribution of radius R1R_1 centred at the origin O. In this distribution, a spherical cavity of radius R2R_2, centred at PP with distance OP=a=R1−R2OP = a = R_1 - R_2 (see figure) is made. If the electric field inside the cavity at position r⃗\vec{r} is E⃗(r⃗)\vec{E}(\vec{r}), then the correct statement(s) is(are) (The figure shows the large sphere with the small cavity touching its surface from inside, and aa drawn from OO to PP.)
  1. (A)E⃗\vec{E} is uniform, its magnitude is independent of R2R_2 but its direction depends on r⃗\vec{r}
  2. (B)E⃗\vec{E} is uniform, its magnitude depends on R2R_2 and its direction depends on r⃗\vec{r}
  3. (C)E⃗\vec{E} is uniform, its magnitude is independent of aa but its direction depends on a⃗\vec{a}
  4. (D)E⃗\vec{E} is uniform and both its magnitude and direction depend on a⃗\vec{a}

Tests: Find the field in a spherical cavity by superposing a positive and a negative sphere.

Show solution
  1. Superpose: a full sphere of density ρ\rho plus a sphere of density −ρ-\rho filling the cavity.
  2. Inside a uniform sphere, E⃗=ρ r⃗3ε0\vec{E} = \dfrac{\rho\,\vec{r}}{3\varepsilon_0} from its centre. In the cavity: E⃗=ρ r⃗3ε0−ρ(r⃗−a⃗)3ε0=ρ a⃗3ε0\vec{E} = \dfrac{\rho\,\vec{r}}{3\varepsilon_0} - \dfrac{\rho(\vec{r} - \vec{a})}{3\varepsilon_0} = \dfrac{\rho\,\vec{a}}{3\varepsilon_0}.
  3. So E⃗\vec{E} is uniform, along a⃗\vec{a}, with magnitude ρa/3ε0\rho a/3\varepsilon_0: both depend on a⃗\vec{a}. (D) true.
  4. (A), (B): the direction does not depend on r⃗\vec{r}. False. (C): the magnitude depends on aa. False.
AnswerAnswer: (D)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Elasticity (stress-strain curve) · +4 / −2
In plotting stress versus strain curves for two materials PP and QQ, a student by mistake puts strain on the y-axis and stress on the x-axis as shown in the figure. Then the correct statement(s) is(are) (The figure: both curves start at the origin as straight lines. PP rises more steeply, then bends upward steeply and ends at the larger strain and a slightly larger stress; QQ is less steep, curves up a little and ends at a smaller strain and slightly smaller stress.)
  1. (A)PP has more tensile strength than QQ
  2. (B)PP is more ductile than QQ
  3. (C)PP is more brittle than QQ
  4. (D)The Young's modulus of PP is more than that of QQ

Tests: Read Young's modulus, strength and ductility from a stress-strain plot with swapped axes.

Show solution
  1. With strain on the y-axis, the slope of the straight part is strain/stress =1/Y= 1/Y. PP is steeper, so YP<YQY_P < Y_Q. (D) false.
  2. Tensile strength is the largest stress before fracture. PP's curve ends further along the stress axis than QQ's. (A) true.
  3. PP undergoes much larger strain (a long plastic region) before breaking, so it is more ductile. (B) true, and (C) false.
AnswerAnswer: (A), (B)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Gravitation and fluid pressure · +4 / −2
A spherical body of radius RR consists of a fluid of constant density and is in equilibrium under its own gravity. If P(r)P(r) is the pressure at r (r<R)r\ (r < R), then the correct option(s) is(are)
  1. (A)P(r=0)=0P(r = 0) = 0
  2. (B)P(r=3R/4)P(r=2R/3)=6380\dfrac{P(r = 3R/4)}{P(r = 2R/3)} = \dfrac{63}{80}
  3. (C)P(r=3R/5)P(r=2R/5)=1621\dfrac{P(r = 3R/5)}{P(r = 2R/5)} = \dfrac{16}{21}
  4. (D)P(r=R/2)P(r=R/3)=2027\dfrac{P(r = R/2)}{P(r = R/3)} = \dfrac{20}{27}

Tests: Integrate hydrostatic equilibrium with gravity that grows linearly inside a uniform sphere.

Show solution
  1. Inside a uniform sphere g(r)=43πGρrg(r) = \dfrac{4}{3}\pi G\rho r. Hydrostatic balance: dPdr=−ρg(r)=−43πGρ2r\dfrac{dP}{dr} = -\rho g(r) = -\dfrac{4}{3}\pi G\rho^2 r.
  2. With P(R)=0P(R) = 0 at the surface: P(r)=23πGρ2(R2−r2)P(r) = \dfrac{2}{3}\pi G\rho^2(R^2 - r^2). So P∝R2−r2P \propto R^2 - r^2, largest at the centre. (A) false.
  3. (B): 1−9/161−4/9=7/165/9=6380\dfrac{1 - 9/16}{1 - 4/9} = \dfrac{7/16}{5/9} = \dfrac{63}{80}. True.
  4. (C): 1−9/251−4/25=1621\dfrac{1 - 9/25}{1 - 4/25} = \dfrac{16}{21}. True.
  5. (D): 1−1/41−1/9=3/48/9=2732≠2027\dfrac{1 - 1/4}{1 - 1/9} = \dfrac{3/4}{8/9} = \dfrac{27}{32} \ne \dfrac{20}{27}. False.
AnswerAnswer: (B), (C)
Ask about this question
Q14

Physics, Question 14 (4 marks)

Capacitors with dielectrics · +4 / −2
A parallel plate capacitor having plates of area SS and plate separation dd, has capacitance C1C_1 in air. When two dielectrics of different relative permittivities (ε1=2\varepsilon_1 = 2 and ε2=4\varepsilon_2 = 4) are introduced between the two plates as shown in the figure, the capacitance becomes C2C_2. The ratio C2C1\dfrac{C_2}{C_1} is (The figure shows the plates, ++ on the left and −- on the right, a distance dd apart. The plate area is split into an upper half S/2S/2 and a lower half S/2S/2. Dielectric ε2\varepsilon_2 is a slab of thickness d/2d/2 over the upper half, against the right plate; dielectric ε1\varepsilon_1 fills all the rest of the gap: the whole lower half and the left d/2d/2 of the upper half.)
  1. (A)6/5
  2. (B)5/3
  3. (C)7/5
  4. (D)7/3

Tests: Split a capacitor with dielectric blocks into series and parallel parts.

Show solution
  1. C1=ε0SdC_1 = \dfrac{\varepsilon_0 S}{d}. The two halves of the area are in parallel.
  2. Lower half: ε1=2\varepsilon_1 = 2 across the full gap: Clow=2ε0(S/2)d=C1C_{low} = \dfrac{2\varepsilon_0 (S/2)}{d} = C_1.
  3. Upper half: ε1\varepsilon_1 (thickness d/2d/2) in series with ε2\varepsilon_2 (thickness d/2d/2). Ca=2ε0(S/2)d/2=2C1C_a = \dfrac{2\varepsilon_0(S/2)}{d/2} = 2C_1, Cb=4ε0(S/2)d/2=4C1C_b = \dfrac{4\varepsilon_0(S/2)}{d/2} = 4C_1. Series: 2×42+4C1=43C1\dfrac{2 \times 4}{2 + 4}C_1 = \dfrac{4}{3}C_1.
  4. C2=C1+43C1=73C1C_2 = C_1 + \dfrac{4}{3}C_1 = \dfrac{7}{3}C_1.
AnswerAnswer: (D) 7/3
Ask about this question
Q15

Physics, Question 15 (4 marks)

Thermodynamics (first law) · +4 / −2
An ideal monoatomic gas is confined in a horizontal cylinder by a spring loaded piston (as shown in the figure). Initially the gas is at temperature T1T_1, pressure P1P_1 and volume V1V_1 and the spring is in its relaxed state. The gas is then heated very slowly to temperature T2T_2, pressure P2P_2 and volume V2V_2. During this process the piston moves out by a distance xx. Ignoring the friction between the piston and the cylinder, the correct statement(s) is(are) (The figure shows the gas on the left of the piston and a spring between the piston and the fixed right end wall.)
  1. (A)If V2=2V1V_2 = 2V_1 and T2=3T1T_2 = 3T_1, then the energy stored in the spring is 14P1V1\dfrac{1}{4}P_1V_1
  2. (B)If V2=2V1V_2 = 2V_1 and T2=3T1T_2 = 3T_1, then the change in internal energy is 3P1V13P_1V_1
  3. (C)If V2=3V1V_2 = 3V_1 and T2=4T1T_2 = 4T_1, then the work done by the gas is 73P1V1\dfrac{7}{3}P_1V_1
  4. (D)If V2=3V1V_2 = 3V_1 and T2=4T1T_2 = 4T_1, then the heat supplied to the gas is 176P1V1\dfrac{17}{6}P_1V_1

Tests: Apply the first law to a gas pushing a spring-loaded piston, where pressure is linear in volume.

Show solution
  1. With the spring relaxed, the gas pressure P1P_1 is balanced by a constant outside pressure P1P_1. As the piston (area AA) moves out by xx: P=P1+kxAP = P_1 + \dfrac{kx}{A}, and x=V−V1Ax = \dfrac{V - V_1}{A}, so PP rises linearly with VV.

    Why: A straight line on the P-V diagram makes work a trapezium area.

  2. V2=2V1V_2 = 2V_1, T2=3T1T_2 = 3T_1: P2=P1T2V1T1V2=32P1P_2 = P_1\dfrac{T_2 V_1}{T_1 V_2} = \dfrac{3}{2}P_1. Spring energy 12kx2=12(P2−P1)A⋅x=12⋅12P1⋅V1=14P1V1\tfrac{1}{2}kx^2 = \tfrac{1}{2}(P_2 - P_1)A\cdot x = \tfrac{1}{2}\cdot\tfrac{1}{2}P_1\cdot V_1 = \tfrac{1}{4}P_1V_1. (A) true.
  3. ΔU=32nRΔT=32(P2V2−P1V1)=32(3−1)P1V1=3P1V1\Delta U = \tfrac{3}{2}nR\Delta T = \tfrac{3}{2}(P_2V_2 - P_1V_1) = \tfrac{3}{2}(3 - 1)P_1V_1 = 3P_1V_1. (B) true.
  4. V2=3V1V_2 = 3V_1, T2=4T1T_2 = 4T_1: P2=43P1P_2 = \tfrac{4}{3}P_1. Work =12(P1+P2)(V2−V1)=12⋅73P1⋅2V1=73P1V1= \tfrac{1}{2}(P_1 + P_2)(V_2 - V_1) = \tfrac{1}{2}\cdot\tfrac{7}{3}P_1\cdot 2V_1 = \tfrac{7}{3}P_1V_1. (C) true.
  5. Heat: Q=ΔU+W=32(4−1)P1V1+73P1V1=92P1V1+73P1V1=416P1V1≠176P1V1Q = \Delta U + W = \tfrac{3}{2}(4 - 1)P_1V_1 + \tfrac{7}{3}P_1V_1 = \tfrac{9}{2}P_1V_1 + \tfrac{7}{3}P_1V_1 = \tfrac{41}{6}P_1V_1 \ne \tfrac{17}{6}P_1V_1. (D) false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q16

Physics, Question 16 (4 marks)

Nuclear fission · +4 / −2
A fission reaction is given by 92236U→ 54140Xe+ 3894Sr+x+y^{236}_{92}\mathrm{U} \rightarrow\ ^{140}_{54}\mathrm{Xe} +\ ^{94}_{38}\mathrm{Sr} + x + y, where xx and yy are two particles. Considering 92236U^{236}_{92}\mathrm{U} to be at rest, the kinetic energies of the products are denoted by KXeK_{Xe}, KSrK_{Sr}, KxK_x (2 MeV) and KyK_y (2 MeV), respectively. Let the binding energies per nucleon of 92236U^{236}_{92}\mathrm{U}, 54140Xe^{140}_{54}\mathrm{Xe} and 3894Sr^{94}_{38}\mathrm{Sr} be 7.5 MeV, 8.5 MeV and 8.5 MeV, respectively. Considering different conservation laws, the correct option(s) is(are)
  1. (A)x=nx = n, y=ny = n, KSr=129K_{Sr} = 129 MeV, KXe=86K_{Xe} = 86 MeV
  2. (B)x=px = p, y=e−y = e^-, KSr=129K_{Sr} = 129 MeV, KXe=86K_{Xe} = 86 MeV
  3. (C)x=px = p, y=ny = n, KSr=129K_{Sr} = 129 MeV, KXe=86K_{Xe} = 86 MeV
  4. (D)x=nx = n, y=ny = n, KSr=86K_{Sr} = 86 MeV, KXe=129K_{Xe} = 129 MeV

Tests: Use conservation of nucleon number, charge, energy and momentum in a fission reaction.

Show solution
  1. Mass number: 236−140−94=2236 - 140 - 94 = 2, so xx and yy carry one nucleon each. Charge: 92−54−38=092 - 54 - 38 = 0, so they are neutral. Both are neutrons. (B) fails the nucleon count (p+e−p + e^- carries 1), (C) fails charge (+1+1).
  2. Energy released: Q=(140+94)(8.5)−236(7.5)=1989−1770=219Q = (140 + 94)(8.5) - 236(7.5) = 1989 - 1770 = 219 MeV.
  3. KXe+KSr=219−2−2=215K_{Xe} + K_{Sr} = 219 - 2 - 2 = 215 MeV.
  4. Momentum: with the two neutrons' momenta cancelling, XeXe and SrSr have equal and opposite momenta, so K=p2/2mK = p^2/2m shares the energy inversely to mass: KSr=215×140234≈129K_{Sr} = 215 \times \dfrac{140}{234} \approx 129 MeV, KXe=215×94234≈86K_{Xe} = 215 \times \dfrac{94}{234} \approx 86 MeV.
  5. (A) matches. (D) swaps the two: the lighter fragment gets more energy, so (D) is false.
AnswerAnswer: (A)
Ask about this question

Physics, Section 3: Two paragraphs, two questions each, one or more options correct: +4 if only all the correct options are darkened, 0 if none is darkened, −2 in all other cases

Q17

Physics, Question 17 (4 marks)

Hall effect · +4 / −2
Paragraph: In a thin rectangular metallic strip a constant current II flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are ll, ww and dd, respectively. A uniform magnetic field B⃗\vec{B} is applied on the strip along the positive y-direction. Due to this, the charge carriers experience a net deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRSPQRS and appearance of equal and opposite charges on the face opposite to PQRSPQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross section of the strip and carried by electrons. (The figure shows the strip lying along x with length ll; its thickness dd is vertical, along y, and its width ww runs along z, towards the viewer. PQRSPQRS is the front face, perpendicular to z. Point MM is on the front face PQRSPQRS and point KK on the opposite back face. Axes: x to the right, y up, z out of the page towards the viewer.)

Question: Consider two different metallic strips (1 and 2) of the same material. Their lengths are the same, widths are w1w_1 and w2w_2 and thicknesses are d1d_1 and d2d_2, respectively. Two points KK and MM are symmetrically located on the opposite faces parallel to the x-y plane (see figure). V1V_1 and V2V_2 are the potential differences between KK and MM in strips 1 and 2, respectively. Then, for a given current II flowing through them in a given magnetic field strength BB, the correct statement(s) is(are)
  1. (A)If w1=w2w_1 = w_2 and d1=2d2d_1 = 2d_2, then V2=2V1V_2 = 2V_1
  2. (B)If w1=w2w_1 = w_2 and d1=2d2d_1 = 2d_2, then V2=V1V_2 = V_1
  3. (C)If w1=2w2w_1 = 2w_2 and d1=d2d_1 = d_2, then V2=2V1V_2 = 2V_1
  4. (D)If w1=2w2w_1 = 2w_2 and d1=d2d_1 = d_2, then V2=V1V_2 = V_1

Tests: Derive the Hall voltage and see which strip dimension it depends on.

Show solution
  1. At steady state eE=evdBeE = ev_dB, so E=vdBE = v_dB along z. KK and MM are across the width ww (z-direction): V=Ew=vdBwV = Ew = v_dBw.
  2. Current I=nevd(wd)I = nev_d(wd), so vd=Inewdv_d = \dfrac{I}{newd} and V=IBnedV = \dfrac{IB}{ned}.

    Why: The width cancels: a wider strip has slower carriers but a longer gap.

  3. Same material, II and BB: V∝1dV \propto \dfrac{1}{d}, independent of ww.
  4. d1=2d2d_1 = 2d_2: V2=2V1V_2 = 2V_1. (A) true, (B) false.
  5. w1=2w2w_1 = 2w_2, d1=d2d_1 = d_2: V2=V1V_2 = V_1. (D) true, (C) false.
AnswerAnswer: (A), (D)
Ask about this question
Q18

Physics, Question 18 (4 marks)

Hall effect · +4 / −2
Paragraph: In a thin rectangular metallic strip a constant current II flows along the positive x-direction, as shown in the figure. The length, width and thickness of the strip are ll, ww and dd, respectively. A uniform magnetic field B⃗\vec{B} is applied on the strip along the positive y-direction. Due to this, the charge carriers experience a net deflection along the z-direction. This results in accumulation of charge carriers on the surface PQRSPQRS and appearance of equal and opposite charges on the face opposite to PQRSPQRS. A potential difference along the z-direction is thus developed. Charge accumulation continues until the magnetic force is balanced by the electric force. The current is assumed to be uniformly distributed on the cross section of the strip and carried by electrons. (The figure shows the strip lying along x with length ll; its thickness dd is vertical, along y, and its width ww runs along z, towards the viewer. PQRSPQRS is the front face, perpendicular to z. Point MM is on the front face PQRSPQRS and point KK on the opposite back face. Axes: x to the right, y up, z out of the page towards the viewer.)

Question: Consider two different metallic strips (1 and 2) of same dimensions (length ll, width ww and thickness dd) with carrier densities n1n_1 and n2n_2, respectively. Strip 1 is placed in magnetic field B1B_1 and strip 2 is placed in magnetic field B2B_2, both along positive y-directions. Then V1V_1 and V2V_2 are the potential differences developed between KK and MM in strips 1 and 2, respectively. Assuming that the current II is the same for both the strips, the correct option(s) is(are)
  1. (A)If B1=B2B_1 = B_2 and n1=2n2n_1 = 2n_2, then V2=2V1V_2 = 2V_1
  2. (B)If B1=B2B_1 = B_2 and n1=2n2n_1 = 2n_2, then V2=V1V_2 = V_1
  3. (C)If B1=2B2B_1 = 2B_2 and n1=n2n_1 = n_2, then V2=0.5V1V_2 = 0.5V_1
  4. (D)If B1=2B2B_1 = 2B_2 and n1=n2n_1 = n_2, then V2=V1V_2 = V_1

Tests: Use V = IB/(ned) to compare Hall voltages for different carrier densities and fields.

Show solution
  1. Hall voltage across the width: V=IBnedV = \dfrac{IB}{ned}. Same II and dd: V∝BnV \propto \dfrac{B}{n}.
  2. B1=B2B_1 = B_2, n1=2n2n_1 = 2n_2: V2V1=n1n2=2\dfrac{V_2}{V_1} = \dfrac{n_1}{n_2} = 2. (A) true, (B) false.

    Why: Fewer carriers must drift faster to carry the same current, so the magnetic push is larger.

  3. B1=2B2B_1 = 2B_2, n1=n2n_1 = n_2: V2V1=B2B1=0.5\dfrac{V_2}{V_1} = \dfrac{B_2}{B_1} = 0.5. (C) true, (D) false.
AnswerAnswer: (A), (C)
Ask about this question
Q19

Physics, Question 19 (4 marks)

Optical fibre (total internal reflection) · +4 / −2
Paragraph: Light guidance in an optical fiber can be understood by considering a structure comprising of thin solid glass cylinder of refractive index n1n_1 surrounded by a medium of lower refractive index n2n_2. The light guidance in the structure takes place due to successive total internal reflections at the interface of the media n1n_1 and n2n_2 as shown in the figure. All rays with the angle of incidence ii less than a particular value imi_m are confined in the medium of refractive index n1n_1. The numerical aperture (NA) of the structure is defined as sin⁡im\sin i_m. (The figure shows a core of index n1n_1 between cladding of index n2n_2, with n1>n2n_1 > n_2; a ray from the outside medium (air) hits the flat end face at angle ii to the axis, refracts into the core, and meets the core-cladding boundary at angle θ\theta to the normal, reflecting back and forth along the core.)

Question: For two structures namely S1S_1 with n1=45/4n_1 = \sqrt{45}/4 and n2=3/2n_2 = 3/2, and S2S_2 with n1=8/5n_1 = 8/5 and n2=7/5n_2 = 7/5 and taking the refractive index of water to be 4/3 and that of air to be 1, the correct option(s) is(are)
  1. (A)NA of S1S_1 immersed in water is the same as that of S2S_2 immersed in a liquid of refractive index 16315\dfrac{16}{3\sqrt{15}}
  2. (B)NA of S1S_1 immersed in liquid of refractive index 615\dfrac{6}{\sqrt{15}} is the same as that of S2S_2 immersed in water
  3. (C)NA of S1S_1 placed in air is the same as that of S2S_2 immersed in liquid of refractive index 415\dfrac{4}{\sqrt{15}}
  4. (D)NA of S1S_1 placed in air is the same as that of S2S_2 placed in water

Tests: Derive the numerical aperture of a fibre and see how the outside medium changes it.

Show solution
  1. From an outside medium n0n_0: n0sin⁡im=n1sin⁡rn_0\sin i_m = n_1\sin r with r=90∘−θcr = 90^\circ - \theta_c and sin⁡θc=n2/n1\sin\theta_c = n_2/n_1. So n0sin⁡im=n1cos⁡θc=n12−n22n_0\sin i_m = n_1\cos\theta_c = \sqrt{n_1^2 - n_2^2} and NA=n12−n22n0\text{NA} = \dfrac{\sqrt{n_1^2 - n_2^2}}{n_0}.
  2. S1S_1: 45/16−36/16=34\sqrt{45/16 - 36/16} = \dfrac{3}{4}. S2S_2: 64/25−49/25=155\sqrt{64/25 - 49/25} = \dfrac{\sqrt{15}}{5}.
  3. (A): S1S_1 in water: 3/44/3=916\dfrac{3/4}{4/3} = \dfrac{9}{16}. S2S_2 in 16315\dfrac{16}{3\sqrt{15}}: 155⋅31516=4580=916\dfrac{\sqrt{15}}{5}\cdot\dfrac{3\sqrt{15}}{16} = \dfrac{45}{80} = \dfrac{9}{16}. True.
  4. (B): S1S_1 in 615\dfrac{6}{\sqrt{15}}: 34⋅156=158≈0.48\dfrac{3}{4}\cdot\dfrac{\sqrt{15}}{6} = \dfrac{\sqrt{15}}{8} \approx 0.48. S2S_2 in water: 155⋅34=31520≈0.58\dfrac{\sqrt{15}}{5}\cdot\dfrac{3}{4} = \dfrac{3\sqrt{15}}{20} \approx 0.58. False.
  5. (C): S1S_1 in air: 34\dfrac{3}{4}. S2S_2 in 415\dfrac{4}{\sqrt{15}}: 155⋅154=34\dfrac{\sqrt{15}}{5}\cdot\dfrac{\sqrt{15}}{4} = \dfrac{3}{4}. True.
  6. (D): 34\dfrac{3}{4} against 31520≈0.58\dfrac{3\sqrt{15}}{20} \approx 0.58. False.
AnswerAnswer: (A), (C)
Ask about this question
Q20

Physics, Question 20 (4 marks)

Optical fibre (total internal reflection) · +4 / −2
Paragraph: Light guidance in an optical fiber can be understood by considering a structure comprising of thin solid glass cylinder of refractive index n1n_1 surrounded by a medium of lower refractive index n2n_2. The light guidance in the structure takes place due to successive total internal reflections at the interface of the media n1n_1 and n2n_2 as shown in the figure. All rays with the angle of incidence ii less than a particular value imi_m are confined in the medium of refractive index n1n_1. The numerical aperture (NA) of the structure is defined as sin⁡im\sin i_m. (The figure shows a core of index n1n_1 between cladding of index n2n_2, with n1>n2n_1 > n_2; a ray from the outside medium (air) hits the flat end face at angle ii to the axis, refracts into the core, and meets the core-cladding boundary at angle θ\theta to the normal, reflecting back and forth along the core.)

Question: If two structures of same cross-sectional area, but different numerical apertures NA1NA_1 and NA2NA_2 (NA2<NA1NA_2 < NA_1) are joined longitudinally, the numerical aperture of the combined structure is
  1. (A)NA1 NA2NA1+NA2\dfrac{NA_1\,NA_2}{NA_1 + NA_2}
  2. (B)NA1+NA2NA_1 + NA_2
  3. (C)NA1NA_1
  4. (D)NA2NA_2

Tests: Recognise that a chain of light guides accepts only what its most restrictive part accepts.

Show solution
  1. A ray is guided by the joined structure only if it is guided all the way: in both pieces.
  2. A ray that enters within NA1NA_1 but outside NA2NA_2 meets the second piece's core-cladding boundary below its critical angle and leaks out.

    Why: The ray's angle to the axis carries over across the joint.

  3. Rays within NA2NA_2 (the smaller) satisfy both conditions. So the combined acceptance is limited by the smaller aperture: NA2NA_2.
  4. (A) and (B) are not acceptance angles of either piece; (C) would let leaking rays count. Only (D).
AnswerAnswer: (D) NA2NA_2
Ask about this question

Chemistry, Section 1: 8 questions, each answer a single-digit integer from 0 to 9: +4 if the bubble of the correct answer is darkened, 0 in all other cases

Q21

Chemistry, Question 21 (4 marks)

Alcohols and alkenes (carbocation rearrangement, Baeyer's reagent) · +4
The number of hydroxyl group(s) in Q is (The figure shows a decalin skeleton: 1,1-dimethyl-1,2,3,4,4a,5,8,8a-octahydronaphthalen-2-ol, i.e. one ring carries a CH(OH) next to a ring carbon bearing two methyl groups (C(CH3)2\mathrm{C(CH_3)_2}), which is bonded to a ring-fusion carbon; the other ring carries one C=C between the two carbons farthest from the fusion. The scheme: this alcohol with H+\mathrm{H^+}, heat gives P; P with aqueous dilute KMnO4\mathrm{KMnO_4} (excess) at 0 °C gives Q.)

Tests: Track a dehydration with a methyl shift, then count OH groups after cold KMnO4 dihydroxylation.

Show solution
  1. H+\mathrm{H^+}/heat protonates the OH and water leaves, giving a secondary carbocation at C2, next to the quaternary C(CH3)2\mathrm{C(CH_3)_2} (C1).
  2. A 1,2-methyl shift from C1 to C2 turns it into a tertiary carbocation at C1.

    Why: Rearrangement to the more stable cation comes before elimination.

  3. Loss of a proton gives a tetrasubstituted C=C in that ring (C1=C2 with a methyl on each carbon, i.e. 1,2-dimethyl-3,4,4a,5,8,8a-hexahydronaphthalene; loss from C8a would give C1=C8a, also tetrasubstituted). So P is a diene with two isolated C=C: the new one plus the original ring C=C.
  4. Cold, dilute, alkaline/aqueous KMnO4\mathrm{KMnO_4} (Baeyer's reagent) in excess does syn-dihydroxylation of every C=C: each C=C becomes a 1,2-diol.
  5. Two C=C ×\times 2 OH = 4 hydroxyl groups in Q (the original OH was lost as water in step 1).
AnswerAnswer: 4
Ask about this question
Q22

Chemistry, Question 22 (4 marks)

Aldehydes (preparation of benzaldehyde) · +4
Among the following, the number of reaction(s) that produce(s) benzaldehyde is: I. benzene with CO, HCl, anhydrous AlCl3/CuCl\mathrm{AlCl_3/CuCl}; II. C6H5CHCl2\mathrm{C_6H_5CHCl_2} with H2O\mathrm{H_2O}, 100 °C; III. C6H5COCl\mathrm{C_6H_5COCl} with H2\mathrm{H_2}, Pd-BaSO4\mathrm{Pd\text{-}BaSO_4}; IV. C6H5CO2Me\mathrm{C_6H_5CO_2Me} with DIBAL-H, toluene, −78-78 °C, then H2O\mathrm{H_2O}.

Tests: Recognise the named reactions that give an aromatic aldehyde.

Show solution
  1. I. Gattermann–Koch formylation: CO + HCl with AlCl3/CuCl\mathrm{AlCl_3/CuCl} puts CHO on benzene, giving C6H5CHO\mathrm{C_6H_5CHO}. Yes.
  2. II. Benzal chloride hydrolyses to the gem-diol C6H5CH(OH)2\mathrm{C_6H_5CH(OH)_2}, which loses water to C6H5CHO\mathrm{C_6H_5CHO}. Yes.

    Why: This is the industrial route from toluene via side-chain chlorination.

  3. III. Rosenmund reduction: the poisoned Pd catalyst reduces the acid chloride only as far as the aldehyde. Yes.
  4. IV. One equivalent of DIBAL-H at −78-78 °C stops at the tetrahedral aluminium hemiacetal, which hydrolyses to the aldehyde. Yes.
  5. All four reactions give benzaldehyde: 4.
AnswerAnswer: 4
Ask about this question
Q23

Chemistry, Question 23 (4 marks)

Coordination compounds (organometallics) · +4
In the complex acetylbromidodicarbonylbis(triethylphosphine)iron(II), the number of Fe–C bond(s) is

Tests: Turn a complex's IUPAC name into a formula and count metal–carbon bonds.

Show solution
  1. Write the formula from the name: [Fe(COCH3)Br(CO)2(PEt3)2]\mathrm{[Fe(COCH_3)Br(CO)_2(PEt_3)_2]}.
  2. Acetyl, CH3CO−\mathrm{CH_3CO^-}, binds through its acyl carbon: 1 Fe–C bond.
  3. Each carbonyl binds through C: 2 Fe–C bonds.
  4. Bromide binds through Br and triethylphosphine through P, so no further Fe–C bonds. Total = 1 + 2 = 3.

    Why: The ethyl carbons of PEt3 are bonded to P, not to Fe.

AnswerAnswer: 3
Ask about this question
Q24

Chemistry, Question 24 (4 marks)

Coordination compounds (geometrical isomerism) · +4
Among the complex ions, [Co(NH2-CH2-CH2-NH2)2Cl2]+\mathrm{[Co(NH_2\text{-}CH_2\text{-}CH_2\text{-}NH_2)_2Cl_2]^+}, [CrCl2(C2O4)2]3−\mathrm{[CrCl_2(C_2O_4)_2]^{3-}}, [Fe(H2O)4(OH)2]+\mathrm{[Fe(H_2O)_4(OH)_2]^+}, [Fe(NH3)2(CN)4]−\mathrm{[Fe(NH_3)_2(CN)_4]^-}, [Co(NH2-CH2-CH2-NH2)2(NH3)Cl]2+\mathrm{[Co(NH_2\text{-}CH_2\text{-}CH_2\text{-}NH_2)_2(NH_3)Cl]^{2+}} and [Co(NH3)4(H2O)Cl]2+\mathrm{[Co(NH_3)_4(H_2O)Cl]^{2+}}, the number of complex ion(s) that show(s) cis-trans isomerism is

Tests: Classify octahedral complexes by type and decide which show geometrical isomerism.

Show solution
  1. All six are octahedral. Cis-trans isomerism appears whenever two particular positions can be adjacent (90°) or opposite (180°).
  2. [Co(en)2Cl2]+\mathrm{[Co(en)_2Cl_2]^+} and [CrCl2(ox)2]3−\mathrm{[CrCl_2(ox)_2]^{3-}}: type M(AA)2B2\mathrm{M(AA)_2B_2}; the two B can be cis or trans. Both show it.
  3. [Fe(H2O)4(OH)2]+\mathrm{[Fe(H_2O)_4(OH)_2]^+} and [Fe(NH3)2(CN)4]−\mathrm{[Fe(NH_3)_2(CN)_4]^-}: type MA4B2\mathrm{MA_4B_2}; the two B can be cis or trans. Both show it.
  4. [Co(en)2(NH3)Cl]2+\mathrm{[Co(en)_2(NH_3)Cl]^{2+}}: type M(AA)2BC\mathrm{M(AA)_2BC}; NH3\mathrm{NH_3} and Cl can be cis or trans. Shows it.
  5. [Co(NH3)4(H2O)Cl]2+\mathrm{[Co(NH_3)_4(H_2O)Cl]^{2+}}: type MA4BC\mathrm{MA_4BC}; H2O\mathrm{H_2O} and Cl can be cis or trans. Shows it.
  6. All 6 ions show cis-trans isomerism.
AnswerAnswer: 6
Ask about this question
Q25

Chemistry, Question 25 (4 marks)

p-Block elements (boron hydrides) · +4
Three moles of B2H6\mathrm{B_2H_6} are completely reacted with methanol. The number of moles of boron containing product formed is

Tests: Write the methanolysis of diborane and use boron conservation.

Show solution
  1. Methanolysis of diborane: B2H6+6CH3OH→2B(OCH3)3+6H2\mathrm{B_2H_6 + 6CH_3OH \rightarrow 2B(OCH_3)_3 + 6H_2}.
  2. Each mole of B2H6\mathrm{B_2H_6} gives 2 mol of trimethyl borate (all boron ends up in it).
  3. 3 mol B2H6\mathrm{B_2H_6} →\rightarrow 3×2=3 \times 2 = 6 mol B(OCH3)3\mathrm{B(OCH_3)_3}.
AnswerAnswer: 6
Ask about this question
Q26

Chemistry, Question 26 (4 marks)

Electrochemistry (conductance of weak electrolytes) · +4
The molar conductivity of a solution of a weak acid HX (0.01 M) is 10 times smaller than the molar conductivity of a solution of a weak acid HY (0.10 M). If λX−0≈λY−0\lambda^0_{\mathrm{X^-}} \approx \lambda^0_{\mathrm{Y^-}}, the difference in their pKa\mathrm{p}K_a values, pKa(HX)−pKa(HY)\mathrm{p}K_a(\mathrm{HX}) - \mathrm{p}K_a(\mathrm{HY}), is (consider degree of ionization of both acids to be ≪1\ll 1)

Tests: Link molar conductivity to degree of ionisation and then to Ka by Ostwald's dilution law.

Show solution
  1. For a weak electrolyte α=Λm/Λm0\alpha = \Lambda_m / \Lambda_m^0. Since λX−0≈λY−0\lambda^0_{\mathrm{X^-}} \approx \lambda^0_{\mathrm{Y^-}}, both acids have the same Λm0\Lambda_m^0, so αHX/αHY=ΛHX/ΛHY=1/10\alpha_{\mathrm{HX}}/\alpha_{\mathrm{HY}} = \Lambda_{\mathrm{HX}}/\Lambda_{\mathrm{HY}} = 1/10.
  2. With α≪1\alpha \ll 1, Ka=cα2K_a = c\alpha^2.
  3. Ka(HX)Ka(HY)=0.010.10(110)2=10−1×10−2=10−3\dfrac{K_a(\mathrm{HX})}{K_a(\mathrm{HY})} = \dfrac{0.01}{0.10}\left(\dfrac{1}{10}\right)^2 = 10^{-1} \times 10^{-2} = 10^{-3}.
  4. pKa(HX)−pKa(HY)=−log⁡10−3=\mathrm{p}K_a(\mathrm{HX}) - \mathrm{p}K_a(\mathrm{HY}) = -\log 10^{-3} = 3.
AnswerAnswer: 3
Ask about this question
Q27

Chemistry, Question 27 (4 marks)

Nuclear chemistry and gas laws · +4
A closed vessel with rigid walls contains 1 mol of 92238U^{238}_{92}\mathrm{U} and 1 mol of air at 298 K. Considering complete decay of 92238U^{238}_{92}\mathrm{U} to 82206Pb^{206}_{82}\mathrm{Pb}, the ratio of the final pressure to the initial pressure of the system at 298 K is

Tests: Count α and β emissions in a decay series and apply p ∝ n at fixed V and T.

Show solution
  1. Mass number falls by 238−206=32238 - 206 = 32; only α\alpha decay changes it, by 4 each: 32/4=832/4 = 8 α\alpha particles.
  2. Charge check: 92−2(8)=7692 - 2(8) = 76; to reach 82 we need 6 β−\beta^- emissions. These do not change the gas count.
  3. Each α\alpha particle picks up two electrons and becomes a He atom, a gas. 1 mol U gives 8 mol He.
  4. U and Pb are solids, so gas moles go from 1 (air) to 1+8=91 + 8 = 9. At the same V and T, p∝np \propto n: pf/pi=9/1=p_f/p_i = 9/1 = 9.
AnswerAnswer: 9
Ask about this question
Q28

Chemistry, Question 28 (4 marks)

Redox reactions and rate of reaction · +4
In dilute aqueous H2SO4\mathrm{H_2SO_4}, the complex diaquodioxalatoferrate(II) is oxidized by MnO4−\mathrm{MnO_4^-}. For this reaction, the ratio of the rate of change of [H+][\mathrm{H^+}] to the rate of change of [MnO4−][\mathrm{MnO_4^-}] is

Tests: Balance a permanganate oxidation where both the metal and the ligand are oxidised, then relate rates by stoichiometry.

Show solution
  1. The complex is [Fe(H2O)2(C2O4)2]2−\mathrm{[Fe(H_2O)_2(C_2O_4)_2]^{2-}}. Both Fe(II) and the two oxalates are oxidised.
  2. Oxidation half: [Fe(H2O)2(C2O4)2]2−→Fe3++4CO2+2H2O+5e−\mathrm{[Fe(H_2O)_2(C_2O_4)_2]^{2-} \rightarrow Fe^{3+} + 4CO_2 + 2H_2O + 5e^-}

    Why: Fe2+ to Fe3+ gives 1 e−, each oxalate to 2 CO2 gives 2 e−: 1 + 4 = 5.

  3. Reduction half: MnO4−+8H++5e−→Mn2++4H2O\mathrm{MnO_4^- + 8H^+ + 5e^- \rightarrow Mn^{2+} + 4H_2O}.
  4. Both halves carry 5 e−, so they add 1 : 1: MnO4−+[Fe(H2O)2(C2O4)2]2−+8H+→Mn2++Fe3++4CO2+6H2O\mathrm{MnO_4^- + [Fe(H_2O)_2(C_2O_4)_2]^{2-} + 8H^+ \rightarrow Mn^{2+} + Fe^{3+} + 4CO_2 + 6H_2O} (charge: +5 on each side).
  5. −d[MnO4−]dt=−18d[H+]dt-\dfrac{d[\mathrm{MnO_4^-}]}{dt} = -\dfrac{1}{8}\dfrac{d[\mathrm{H^+}]}{dt}, so d[H+]/dtd[MnO4−]/dt=\dfrac{d[\mathrm{H^+}]/dt}{d[\mathrm{MnO_4^-}]/dt} = 8.
AnswerAnswer: 8
Ask about this question

Chemistry, Section 2: 8 questions, one or more options correct: +4 if only the bubble(s) of all the correct option(s) are darkened, 0 if none is darkened, −2 in all other cases

Q29

Chemistry, Question 29 (4 marks)

Ozonolysis and heterocycles · +4 / −2
In the following reactions, the product S is (The figure shows 5-methyl-1H-indene, i.e. indene with the CH3\mathrm{CH_3} on the benzene ring, meta to the ring-fusion carbon that carries the C=C and para to the one that carries the CH2\mathrm{CH_2}, treated with (i) O3\mathrm{O_3}, (ii) Zn, H2O\mathrm{H_2O} to give R; R with NH3\mathrm{NH_3} gives S.)
  1. (A)7-methylisoquinoline
  2. (B)7-methylquinoline
  3. (C)6-methylisoquinoline
  4. (D)6-methylquinoline

Tests: Follow ozonolysis of an indene to a dialdehyde and its ring closure with ammonia.

Show solution
  1. Ozonolysis (reductive work-up) cleaves the five-ring C2=C3 bond. C3 becomes a CHO on the ring (on C3a); C2 becomes the CHO of a CH2CHO\mathrm{CH_2CHO} group (on C7a).
  2. R = 2-(2-formyl-4-methylphenyl)ethanal: an aryl aldehyde and an acetaldehyde side chain ortho to each other, with the methyl para to the CH2CHO\mathrm{CH_2CHO} and meta to the CHO.
  3. NH3\mathrm{NH_3} condenses with both carbonyls (two imine formations, loss of 2 H2O\mathrm{H_2O}) to close a six-membered ring containing N, with the CH2\mathrm{CH_2} tautomerising into the aromatic ring: an isoquinoline.

    Why: N sits between the two former CHO carbons, i.e. at position 2, not next to the benzene ring; so it is isoquinoline, not quinoline.

  4. Numbering: the aryl CHO carbon becomes C1 (next to N2), the CH2\mathrm{CH_2} becomes C4. The ring carbon bearing C1 is C8a; the methyl, meta to C8a, is at C7. S = 7-methylisoquinoline, option (A).
  5. (B) and (D) are quinolines (N attached to the benzo ring), impossible here. (C) puts the methyl at C6, which would need methyl meta to the CH2-bearing carbon instead. Only (A).
AnswerAnswer: (A) 7-methylisoquinoline
Ask about this question
Q30

Chemistry, Question 30 (4 marks)

Phenols (cumene process) · +4 / −2
The major product U in the following reactions is (The figure shows benzene with CH2=CH-CH3\mathrm{CH_2{=}CH\text{-}CH_3}, H+\mathrm{H^+}, high pressure, heat giving T; T with a radical initiator and O2\mathrm{O_2} gives U.)
  1. (A)C6H5CH(OOH)CH2CH3\mathrm{C_6H_5CH(OOH)CH_2CH_3} (1-phenylpropyl hydroperoxide)
  2. (B)C6H5C(CH3)2OOH\mathrm{C_6H_5C(CH_3)_2OOH} (cumene hydroperoxide)
  3. (C)C6H5CH(OOH)CH=CH2\mathrm{C_6H_5CH(OOH)CH{=}CH_2} (1-phenylprop-2-enyl hydroperoxide)
  4. (D)C6H5C(=CH2)CH2OOH\mathrm{C_6H_5C({=}CH_2)CH_2OOH} (2-phenylprop-2-enyl hydroperoxide)

Tests: Recognise the first two steps of the cumene process for phenol.

Show solution
  1. Friedel–Crafts alkylation: propene + H+\mathrm{H^+} gives the secondary isopropyl cation (Markovnikov), which alkylates benzene: T = cumene, C6H5CH(CH3)2\mathrm{C_6H_5CH(CH_3)_2}.

    Why: The primary n-propyl cation is never formed, so n-propylbenzene is not obtained.

  2. Radical autoxidation abstracts the tertiary benzylic H (most stable radical) and O2\mathrm{O_2} adds there: U = C6H5C(CH3)2OOH\mathrm{C_6H_5C(CH_3)_2OOH}, cumene hydroperoxide.
  3. (A) would need n-propylbenzene; (C) and (D) contain a C=C that neither step can create. Only (B).
AnswerAnswer: (B) cumene hydroperoxide
Ask about this question
Q31

Chemistry, Question 31 (4 marks)

Amines (diazonium coupling) · +4 / −2
In the following reactions, the major product W is (The figure shows aniline with NaNO2\mathrm{NaNO_2}, HCl at 0 °C giving V; V with 2-naphthol and NaOH gives W.)
  1. (A)1-(phenylazo)naphthalen-2-ol (azo group at C1, next to the OH at C2)
  2. (B)4-(phenylazo)naphthalen-2-ol (azo group at C4 of the same ring as the OH at C2)
  3. (C)5-(phenylazo)naphthalen-2-ol (azo group on the other ring, at C5)
  4. (D)8-(phenylazo)naphthalen-2-ol (azo group on the other ring, at C8)

Tests: Predict the site of azo coupling on 2-naphthol.

Show solution
  1. V = benzenediazonium chloride, C6H5N2+Cl−\mathrm{C_6H_5N_2^+Cl^-} (diazotisation at 0 °C).
  2. In NaOH, 2-naphthol is the naphthoxide ion, strongly activated at C1 (the alpha position ortho to O−).
  3. Electrophilic attack at C1 keeps the other ring fully aromatic in the intermediate; attack at C3 would not. So coupling goes to C1.

    Why: C1 is the more reactive ortho position of 2-naphthol; the para position does not exist on the same ring.

  4. W = 1-(phenylazo)-2-naphthol (Sudan I, an orange-red dye): option (A). (B), (C) and (D) put the azo group at positions not activated by the O−.
AnswerAnswer: (A) 1-phenylazo-2-naphthol
Ask about this question
Q32

Chemistry, Question 32 (4 marks)

p-Block elements (oxoacids of chlorine) · +4 / −2
The correct statement(s) regarding, (i) HClO, (ii) HClO2\mathrm{HClO_2}, (iii) HClO3\mathrm{HClO_3} and (iv) HClO4\mathrm{HClO_4}, is(are)
  1. (A)The number of Cl=O bonds in (ii) and (iii) together is two
  2. (B)The number of lone pairs of electrons on Cl in (ii) and (iii) together is three
  3. (C)The hybridization of Cl in (iv) is sp3sp^3
  4. (D)Amongst (i) to (iv), the strongest acid is (i)

Tests: Draw the oxoacids of chlorine and compare bonding and acid strength.

Show solution
  1. Structures: HClO2\mathrm{HClO_2} is H–O–Cl(=O) with 2 lone pairs on Cl; HClO3\mathrm{HClO_3} is H–O–Cl(=O)2_2 with 1 lone pair on Cl; HClO4\mathrm{HClO_4} is H–O–Cl(=O)3_3 with none.
  2. (A) Cl=O bonds: 1 + 2 = 3, not two. False.
  3. (B) Lone pairs on Cl: 2 + 1 = 3. True.
  4. (C) Cl in HClO4\mathrm{HClO_4} has 4 sigma bonds and no lone pair: sp3sp^3. True.
  5. (D) Acid strength rises with the number of oxygen atoms on Cl (more stabilised anion): HClO4\mathrm{HClO_4} is the strongest, HClO the weakest. False.
AnswerAnswer: (B), (C)
Ask about this question
Q33

Chemistry, Question 33 (4 marks)

Qualitative analysis (group II cations) · +4 / −2
The pair(s) of ions where BOTH the ions are precipitated upon passing H2S\mathrm{H_2S} gas in presence of dilute HCl, is(are)
  1. (A)Ba2+,Zn2+\mathrm{Ba^{2+}, Zn^{2+}}
  2. (B)Bi3+,Fe3+\mathrm{Bi^{3+}, Fe^{3+}}
  3. (C)Cu2+,Pb2+\mathrm{Cu^{2+}, Pb^{2+}}
  4. (D)Hg2+,Bi3+\mathrm{Hg^{2+}, Bi^{3+}}

Tests: Use the group reagent of group II (H2S in dilute HCl) to decide which cations precipitate.

Show solution
  1. In dilute HCl the S2−\mathrm{S^{2-}} concentration is very low (common-ion suppression of H2S\mathrm{H_2S}), so only sulphides with very small KspK_{sp} precipitate: the group II cations Hg2+,Pb2+,Cu2+,Bi3+,Cd2+,As3+,Sb3+,Sn2+\mathrm{Hg^{2+}, Pb^{2+}, Cu^{2+}, Bi^{3+}, Cd^{2+}, As^{3+}, Sb^{3+}, Sn^{2+}}.
  2. (A) Ba2+\mathrm{Ba^{2+}} (group V) and Zn2+\mathrm{Zn^{2+}} (group IV, needs basic medium): neither. No.
  3. (B) Bi3+\mathrm{Bi^{3+}} yes, but Fe3+\mathrm{Fe^{3+}} is group III (it only oxidises H2S\mathrm{H_2S} to S and is reduced to Fe2+\mathrm{Fe^{2+}}). No.
  4. (C) CuS and PbS: both group II. Yes. (D) HgS and Bi2S3\mathrm{Bi_2S_3}: both group II. Yes.
AnswerAnswer: (C), (D)
Ask about this question
Q34

Chemistry, Question 34 (4 marks)

Silicones · +4 / −2
Under hydrolytic conditions, the compounds used for preparation of linear polymer and for chain termination, respectively, are
  1. (A)CH3SiCl3\mathrm{CH_3SiCl_3} and Si(CH3)4\mathrm{Si(CH_3)_4}
  2. (B)(CH3)2SiCl2\mathrm{(CH_3)_2SiCl_2} and (CH3)3SiCl\mathrm{(CH_3)_3SiCl}
  3. (C)(CH3)2SiCl2\mathrm{(CH_3)_2SiCl_2} and CH3SiCl3\mathrm{CH_3SiCl_3}
  4. (D)SiCl4\mathrm{SiCl_4} and (CH3)3SiCl\mathrm{(CH_3)_3SiCl}

Tests: Relate the number of hydrolysable groups on Si to the silicone structure formed.

Show solution
  1. Hydrolysis turns each Si–Cl into Si–OH; the silanols condense to Si–O–Si. The number of Cl on Si sets how many chain links that unit makes.
  2. (CH3)2SiCl2→(CH3)2Si(OH)2\mathrm{(CH_3)_2SiCl_2 \rightarrow (CH_3)_2Si(OH)_2}: two links, so it builds a linear chain −[Si(CH3)2-O]n−\mathrm{-[Si(CH_3)_2\text{-}O]_n-}.
  3. (CH3)3SiCl→(CH3)3SiOH\mathrm{(CH_3)_3SiCl \rightarrow (CH_3)_3SiOH}: only one link, so it caps the chain: chain terminator.
  4. CH3SiCl3\mathrm{CH_3SiCl_3} and SiCl4\mathrm{SiCl_4} have three or four links and give cross-linked networks; Si(CH3)4\mathrm{Si(CH_3)_4} has no Si–Cl and does not react. Only (B).
AnswerAnswer: (B) (CH3)2SiCl2\mathrm{(CH_3)_2SiCl_2} and (CH3)3SiCl\mathrm{(CH_3)_3SiCl}
Ask about this question
Q35

Chemistry, Question 35 (4 marks)

Surface chemistry (chemisorption) · +4 / −2
When O2\mathrm{O_2} is adsorbed on a metallic surface, electron transfer occurs from the metal to O2\mathrm{O_2}. The TRUE statement(s) regarding this adsorption is(are)
  1. (A)O2\mathrm{O_2} is physisorbed
  2. (B)heat is released
  3. (C)occupancy of π2p∗\pi^*_{2p} of O2\mathrm{O_2} is increased
  4. (D)bond length of O2\mathrm{O_2} is increased

Tests: Connect chemisorption with the MO picture of O2.

Show solution
  1. Electron transfer means a chemical bond with the surface: this is chemisorption, not physisorption. (A) False.
  2. Adsorption is spontaneous with a loss of entropy, so ΔH<0\Delta H < 0: heat is released. (B) True.
  3. The electron goes into the lowest empty-or-half-filled orbital of O2\mathrm{O_2}, the antibonding π2p∗\pi^*_{2p} (forming a superoxide/peroxide-like species). (C) True.
  4. More antibonding electrons lower the bond order (2 to 1.5 or 1), so the O–O bond lengthens. (D) True.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q36

Chemistry, Question 36 (4 marks)

Gaseous state (real gases) · +4 / −2
One mole of a monoatomic real gas satisfies the equation p(V−b)=RTp(V - b) = RT where bb is a constant. The relationship of interatomic potential V(r)V(r) and interatomic distance rr for the gas is given by (The figure shows four sketches of V(r)V(r) against rr.)
  1. (A)A smooth potential well: V(r)V(r) very large at small rr, falling below zero to a minimum, then rising back to 0 at large rr
  2. (B)V(r)=0V(r) = 0 for all rr (a horizontal line on the rr axis)
  3. (C)A vertical wall: V(r)V(r) infinite for rr below a finite distance, and exactly 0 at and beyond it
  4. (D)A square well: a vertical wall at a finite distance, then a flat negative region, then V(r)=0V(r) = 0 beyond it

Tests: Read the van der Waals constants a and b as attraction and finite size, and match them to a potential curve.

Show solution
  1. Compare with van der Waals: (p+aV2)(V−b)=RT\left(p + \dfrac{a}{V^2}\right)(V - b) = RT. Here a=0a = 0 but b≠0b \neq 0.
  2. b≠0b \neq 0: the atoms have a finite size and cannot approach closer than a fixed distance, so V(r)→∞V(r) \rightarrow \infty there (hard repulsive wall).
  3. a=0a = 0: there is no attraction, so V(r)=0V(r) = 0 everywhere outside that distance (no negative well).
  4. This is the hard-sphere potential, sketch (C). (A) and (D) have attraction (a≠0a \ne 0); (B) has neither attraction nor size (ideal gas).
AnswerAnswer: (C) hard-sphere potential
Ask about this question

Chemistry, Section 3: 2 paragraphs, 2 questions on each, one or more options correct: +4 if only the bubble(s) of all the correct option(s) are darkened, 0 if none is darkened, −2 in all other cases

Q37

Chemistry, Question 37 (4 marks)

Hydrocarbons (alkynes, hydroboration) · +4 / −2
Paragraph: In the following reactions: C8H6\mathrm{C_8H_6} with H2\mathrm{H_2}, Pd-BaSO4\mathrm{Pd\text{-}BaSO_4} gives C8H8\mathrm{C_8H_8}, which with (i) B2H6\mathrm{B_2H_6}, (ii) H2O2,NaOH,H2O\mathrm{H_2O_2, NaOH, H_2O} gives X. C8H6\mathrm{C_8H_6} with H2O\mathrm{H_2O}, HgSO4,H2SO4\mathrm{HgSO_4, H_2SO_4} gives C8H8O\mathrm{C_8H_8O}, which with (i) EtMgBr,H2O\mathrm{EtMgBr, H_2O}, (ii) H+\mathrm{H^+}, heat gives Y. Question: Compound X is
  1. (A)C6H5COCH3\mathrm{C_6H_5COCH_3} (acetophenone)
  2. (B)C6H5CH(OH)CH3\mathrm{C_6H_5CH(OH)CH_3} (1-phenylethanol)
  3. (C)C6H5CH2CH2OH\mathrm{C_6H_5CH_2CH_2OH} (2-phenylethanol)
  4. (D)C6H5CH2CHO\mathrm{C_6H_5CH_2CHO} (phenylacetaldehyde)

Tests: Identify phenylacetylene from its formula and follow partial hydrogenation and hydroboration–oxidation.

Show solution
  1. C8H6\mathrm{C_8H_6} has 6 degrees of unsaturation; with a benzene ring (4) the rest is a C≡C: phenylacetylene, C6H5C≡CH\mathrm{C_6H_5C{\equiv}CH}.
  2. Lindlar-type H2\mathrm{H_2}/Pd-BaSO4\mathrm{BaSO_4} stops at the alkene: C8H8\mathrm{C_8H_8} = styrene, C6H5CH=CH2\mathrm{C_6H_5CH{=}CH_2}.
  3. Hydroboration–oxidation adds H and OH anti-Markovnikov: OH goes to the terminal carbon. X = C6H5CH2CH2OH\mathrm{C_6H_5CH_2CH_2OH}.
  4. (A) is the hydration product of the alkyne (that is C8H8O\mathrm{C_8H_8O}), (B) the Markovnikov alcohol, (D) an aldehyde not formed here. Only (C).
AnswerAnswer: (C) 2-phenylethanol
Ask about this question
Q38

Chemistry, Question 38 (4 marks)

Alcohols (Grignard reaction, dehydration) · +4 / −2
Paragraph: In the following reactions: C8H6\mathrm{C_8H_6} with H2\mathrm{H_2}, Pd-BaSO4\mathrm{Pd\text{-}BaSO_4} gives C8H8\mathrm{C_8H_8}, which with (i) B2H6\mathrm{B_2H_6}, (ii) H2O2,NaOH,H2O\mathrm{H_2O_2, NaOH, H_2O} gives X. C8H6\mathrm{C_8H_6} with H2O\mathrm{H_2O}, HgSO4,H2SO4\mathrm{HgSO_4, H_2SO_4} gives C8H8O\mathrm{C_8H_8O}, which with (i) EtMgBr,H2O\mathrm{EtMgBr, H_2O}, (ii) H+\mathrm{H^+}, heat gives Y. Question: The major compound Y is
  1. (A)C6H5CH2CH=CHCH3\mathrm{C_6H_5CH_2CH{=}CHCH_3} (1-phenylbut-2-ene)
  2. (B)C6H5CH=CHCH2CH3\mathrm{C_6H_5CH{=}CHCH_2CH_3} (1-phenylbut-1-ene)
  3. (C)C6H5C(=CH2)CH2CH3\mathrm{C_6H_5C({=}CH_2)CH_2CH_3} (2-phenylbut-1-ene)
  4. (D)C6H5C(CH3)=CHCH3\mathrm{C_6H_5C(CH_3){=}CHCH_3} (2-phenylbut-2-ene)

Tests: Chain alkyne hydration, Grignard addition and E1 dehydration, and pick the Saytzeff alkene.

Show solution
  1. HgSO4/H2SO4\mathrm{HgSO_4/H_2SO_4} hydration of phenylacetylene follows Markovnikov's rule: the enol tautomerises to acetophenone, C6H5COCH3\mathrm{C_6H_5COCH_3} (C8H8O\mathrm{C_8H_8O}).
  2. EtMgBr adds to the ketone; work-up gives the tertiary alcohol 2-phenylbutan-2-ol, C6H5C(OH)(CH3)CH2CH3\mathrm{C_6H_5C(OH)(CH_3)CH_2CH_3}.
  3. H+\mathrm{H^+}, heat: E1 via the tertiary benzylic cation. Losing H from CH2\mathrm{CH_2} gives the trisubstituted, conjugated alkene; losing H from CH3\mathrm{CH_3} gives only a disubstituted one.
  4. Major Y = 2-phenylbut-2-ene, C6H5C(CH3)=CHCH3\mathrm{C_6H_5C(CH_3){=}CHCH_3} (Saytzeff product, conjugated with the ring): (D). (C) is the minor Hofmann-type alkene; (A) and (B) have the wrong carbon skeleton.
AnswerAnswer: (D) 2-phenylbut-2-ene
Ask about this question
Q39

Chemistry, Question 39 (4 marks)

Thermochemistry (enthalpy of neutralisation) · +4 / −2
Paragraph: When 100 mL of 1.0 M HCl was mixed with 100 mL of 1.0 M NaOH in an insulated beaker at constant pressure, a temperature increase of 5.7 °C was measured for the beaker and its contents (Expt. 1). Because the enthalpy of neutralization of a strong acid with a strong base is a constant (−57.0 kJ mol−1-57.0\ \mathrm{kJ\ mol^{-1}}), this experiment could be used to measure the calorimeter constant. In a second experiment (Expt. 2), 100 mL of 2.0 M acetic acid (Ka=2.0×10−5K_a = 2.0 \times 10^{-5}) was mixed with 100 mL of 1.0 M NaOH (under identical conditions to Expt. 1) where a temperature rise of 5.6 °C was measured. (Consider heat capacity of all solutions as 4.2 J g−1 K−14.2\ \mathrm{J\ g^{-1}\ K^{-1}} and density of all solutions as 1.0 g mL−11.0\ \mathrm{g\ mL^{-1}}) Question: Enthalpy of dissociation (in kJ mol−1\mathrm{kJ\ mol^{-1}}) of acetic acid obtained from the Expt. 2 is
  1. (A)1.0
  2. (B)10.0
  3. (C)24.5
  4. (D)51.4

Tests: Calibrate a calorimeter with a strong acid–strong base reaction and use it to find a weak acid's dissociation enthalpy.

Show solution
  1. Expt. 1: 0.1 mol HCl + 0.1 mol NaOH release 0.1×57.0=5.700.1 \times 57.0 = 5.70 kJ. Calorimeter constant (beaker + contents) =5.70 kJ/5.7 K=1.0 kJ K−1= 5.70\ \mathrm{kJ} / 5.7\ \mathrm{K} = 1.0\ \mathrm{kJ\ K^{-1}}.
  2. Expt. 2: NaOH (0.1 mol) is limiting, so 0.1 mol acetic acid is neutralised. Heat released =1.0×5.6=5.6= 1.0 \times 5.6 = 5.6 kJ, i.e. 5.6/0.1=56.0 kJ mol−15.6/0.1 = 56.0\ \mathrm{kJ\ mol^{-1}}.

    Why: Same volumes and identical conditions, so the same calorimeter constant applies.

  3. Neutralising a weak acid releases less heat because part of it is used to dissociate the acid: ΔHdiss=57.0−56.0=\Delta H_{\text{diss}} = 57.0 - 56.0 = 1.0 kJ mol−1\mathrm{kJ\ mol^{-1}}.
AnswerAnswer: (A) 1.0
Ask about this question
Q40

Chemistry, Question 40 (4 marks)

Ionic equilibrium (buffers) · +4 / −2
Paragraph: When 100 mL of 1.0 M HCl was mixed with 100 mL of 1.0 M NaOH in an insulated beaker at constant pressure, a temperature increase of 5.7 °C was measured for the beaker and its contents (Expt. 1). Because the enthalpy of neutralization of a strong acid with a strong base is a constant (−57.0 kJ mol−1-57.0\ \mathrm{kJ\ mol^{-1}}), this experiment could be used to measure the calorimeter constant. In a second experiment (Expt. 2), 100 mL of 2.0 M acetic acid (Ka=2.0×10−5K_a = 2.0 \times 10^{-5}) was mixed with 100 mL of 1.0 M NaOH (under identical conditions to Expt. 1) where a temperature rise of 5.6 °C was measured. (Consider heat capacity of all solutions as 4.2 J g−1 K−14.2\ \mathrm{J\ g^{-1}\ K^{-1}} and density of all solutions as 1.0 g mL−11.0\ \mathrm{g\ mL^{-1}}) Question: The pH of the solution after Expt. 2 is
  1. (A)2.8
  2. (B)4.7
  3. (C)5.0
  4. (D)7.0

Tests: Recognise a half-neutralised weak acid as a buffer with pH = pKa.

Show solution
  1. Moles: acetic acid 0.1 L×2.0=0.20.1\ \mathrm{L} \times 2.0 = 0.2 mol; NaOH 0.1×1.0=0.10.1 \times 1.0 = 0.1 mol.
  2. After reaction: 0.1 mol CH3COOH\mathrm{CH_3COOH} and 0.1 mol CH3COO−\mathrm{CH_3COO^-} in 200 mL, an equimolar buffer.
  3. Henderson: pH=pKa+log⁡[CH3COO−][CH3COOH]=pKa=−log⁡(2.0×10−5)=5−0.30=\mathrm{pH} = \mathrm{p}K_a + \log\dfrac{[\mathrm{CH_3COO^-}]}{[\mathrm{CH_3COOH}]} = \mathrm{p}K_a = -\log(2.0 \times 10^{-5}) = 5 - 0.30 = 4.7.
AnswerAnswer: (B) 4.7
Ask about this question

Mathematics, Section 1: 8 questions, answer is a single digit integer from 0 to 9: +4 if the bubble of the correct answer is darkened, 0 in all other cases (no negative marks)

Q41

Mathematics, Question 41 (4 marks)

Complex numbers (roots of unity) · +4
For any integer kk, let αk=cos⁡(kπ7)+isin⁡(kπ7)\alpha_k = \cos\left(\dfrac{k\pi}{7}\right) + i\sin\left(\dfrac{k\pi}{7}\right), where i=−1i = \sqrt{-1}. The value of the expression ∑k=112∣αk+1−αk∣∑k=13∣α4k−1−α4k−2∣\dfrac{\sum_{k=1}^{12} |\alpha_{k+1} - \alpha_k|}{\sum_{k=1}^{3} |\alpha_{4k-1} - \alpha_{4k-2}|} is

Tests: Use that consecutive powers of a unit complex number are equally spaced on the unit circle.

Show solution
  1. αk=eikπ/7\alpha_k = e^{ik\pi/7}, so αk+1−αk=eikπ/7(eiπ/7−1)\alpha_{k+1} - \alpha_k = e^{ik\pi/7}\left(e^{i\pi/7} - 1\right).
  2. Since ∣eikπ/7∣=1|e^{ik\pi/7}| = 1, every such difference has the same modulus: ∣αk+1−αk∣=∣eiπ/7−1∣=2sin⁡π14|\alpha_{k+1} - \alpha_k| = |e^{i\pi/7} - 1| = 2\sin\dfrac{\pi}{14}.

    Why: Consecutive points on the unit circle 'π/7 apart' are always the same chord length apart.

  3. Numerator: 12 equal terms, 12×2sin⁡π1412 \times 2\sin\dfrac{\pi}{14}.
  4. Denominator: α4k−1−α4k−2\alpha_{4k-1} - \alpha_{4k-2} is again a pair of consecutive indices (4k−24k-2 and 4k−14k-1), so 3 equal terms, 3×2sin⁡π143 \times 2\sin\dfrac{\pi}{14}.
  5. Ratio =123=4= \dfrac{12}{3} = 4.
AnswerAnswer: 4
Ask about this question
Q42

Mathematics, Question 42 (4 marks)

Arithmetic progression · +4
Suppose that all the terms of an arithmetic progression (A.P.) are natural numbers. If the ratio of the sum of the first seven terms to the sum of the first eleven terms is 6:116 : 11 and the seventh term lies in between 130 and 140, then the common difference of this A.P. is

Tests: Turn a ratio of A.P. sums into a relation between a and d, then use the bound on a term.

Show solution
  1. S7=72(2a+6d)=7(a+3d)S_7 = \dfrac{7}{2}(2a + 6d) = 7(a + 3d) and S11=112(2a+10d)=11(a+5d)S_{11} = \dfrac{11}{2}(2a + 10d) = 11(a + 5d).
  2. 7(a+3d)11(a+5d)=611⇒7a+21d=6a+30d⇒a=9d\dfrac{7(a + 3d)}{11(a + 5d)} = \dfrac{6}{11} \Rightarrow 7a + 21d = 6a + 30d \Rightarrow a = 9d.
  3. Seventh term: a7=a+6d=15da_7 = a + 6d = 15d, and 130<15d<140⇒8.67<d<9.33130 < 15d < 140 \Rightarrow 8.67 < d < 9.33.
  4. All terms are natural numbers, so dd is an integer: d=9d = 9 (then a=81a = 81, a7=135a_7 = 135).
AnswerAnswer: 9
Ask about this question
Q43

Mathematics, Question 43 (4 marks)

Binomial theorem and counting · +4
The coefficient of x9x^9 in the expansion of (1+x)(1+x2)(1+x3)…(1+x100)(1 + x)(1 + x^2)(1 + x^3)\ldots(1 + x^{100}) is

Tests: Read a product of binomials as counting partitions into distinct parts.

Show solution
  1. Each bracket contributes either 11 or xrx^r. A term x9x^9 arises by choosing distinct exponents from {1,2,…,100}\{1, 2, \ldots, 100\} that add to 9.

    Why: Each bracket is used at most once, so the exponents must be different.

  2. So the coefficient is the number of ways of writing 9 as a sum of distinct positive integers.
  3. One part: 99 (1 way). Two parts: 8+1,7+2,6+3,5+48+1, 7+2, 6+3, 5+4 (4 ways).
  4. Three parts: 6+2+1,5+3+1,4+3+26+2+1, 5+3+1, 4+3+2 (3 ways). Four parts need at least 1+2+3+4=10>91+2+3+4 = 10 > 9: none.
  5. Total =1+4+3=8= 1 + 4 + 3 = 8.
AnswerAnswer: 8
Ask about this question
Q44

Mathematics, Question 44 (4 marks)

Parabola and ellipse (tangents) · +4
Suppose that the foci of the ellipse x29+y25=1\dfrac{x^2}{9} + \dfrac{y^2}{5} = 1 are (f1,0)(f_1, 0) and (f2,0)(f_2, 0) where f1>0f_1 > 0 and f2<0f_2 < 0. Let P1P_1 and P2P_2 be two parabolas with a common vertex at (0,0)(0, 0) and with foci at (f1,0)(f_1, 0) and (2f2,0)(2f_2, 0), respectively. Let T1T_1 be a tangent to P1P_1 which passes through (2f2,0)(2f_2, 0) and T2T_2 be a tangent to P2P_2 which passes through (f1,0)(f_1, 0). If m1m_1 is the slope of T1T_1 and m2m_2 is the slope of T2T_2, then the value of (1m12+m22)\left(\dfrac{1}{m_1^2} + m_2^2\right) is

Tests: Find parabolas from vertex and focus, then use the slope form of a tangent through a given point.

Show solution
  1. Ellipse: a2=9a^2 = 9, b2=5b^2 = 5, ae=9−5=2ae = \sqrt{9 - 5} = 2. So f1=2f_1 = 2, f2=−2f_2 = -2.
  2. P1P_1: vertex (0,0)(0,0), focus (2,0)(2, 0): y2=8xy^2 = 8x. P2P_2: focus (2f2,0)=(−4,0)(2f_2, 0) = (-4, 0): y2=−16xy^2 = -16x.
  3. Tangent to y2=4axy^2 = 4ax with slope mm: y=mx+amy = mx + \dfrac{a}{m}. For P1P_1 (a=2a = 2): y=m1x+2m1y = m_1 x + \dfrac{2}{m_1} through (−4,0)(-4, 0): 0=−4m1+2m1⇒m12=120 = -4m_1 + \dfrac{2}{m_1} \Rightarrow m_1^2 = \dfrac{1}{2}.
  4. For P2P_2 (a=−4a = -4): y=m2x−4m2y = m_2 x - \dfrac{4}{m_2} through (2,0)(2, 0): 0=2m2−4m2⇒m22=20 = 2m_2 - \dfrac{4}{m_2} \Rightarrow m_2^2 = 2.
  5. 1m12+m22=2+2=4\dfrac{1}{m_1^2} + m_2^2 = 2 + 2 = 4.
AnswerAnswer: 4
Ask about this question
Q45

Mathematics, Question 45 (4 marks)

Limits · +4
Let mm and nn be two positive integers greater than 1. If lim⁡α→0(ecos⁡(αn)−eαm)=−(e2)\lim_{\alpha \to 0}\left(\dfrac{e^{\cos(\alpha^n)} - e}{\alpha^m}\right) = -\left(\dfrac{e}{2}\right), then the value of mn\dfrac{m}{n} is

Tests: Use standard exponential and cosine limits to match powers of α.

Show solution
  1. Write ecos⁡(αn)−e=e(ecos⁡(αn)−1−1)e^{\cos(\alpha^n)} - e = e\left(e^{\cos(\alpha^n) - 1} - 1\right).
  2. As α→0\alpha \to 0, cos⁡(αn)−1→0\cos(\alpha^n) - 1 \to 0, so ecos⁡(αn)−1−1∼cos⁡(αn)−1∼−α2n2e^{\cos(\alpha^n) - 1} - 1 \sim \cos(\alpha^n) - 1 \sim -\dfrac{\alpha^{2n}}{2}.

    Why: Standard limits: (e^u − 1)/u → 1 and (1 − cos v)/v² → 1/2.

  3. So the expression behaves like −e2 α2nαm=−e2 α2n−m-\dfrac{e}{2}\,\dfrac{\alpha^{2n}}{\alpha^m} = -\dfrac{e}{2}\,\alpha^{2n - m}.
  4. The limit is the finite non-zero value −e2-\dfrac{e}{2} only if 2n−m=02n - m = 0, i.e. m=2nm = 2n. Hence mn=2\dfrac{m}{n} = 2.
AnswerAnswer: 2
Ask about this question
Q46

Mathematics, Question 46 (4 marks)

Definite integration · +4
If α=∫01(e9x+3tan⁡−1x)(12+9x21+x2)dx\alpha = \displaystyle\int_0^1 \left(e^{9x + 3\tan^{-1}x}\right)\left(\dfrac{12 + 9x^2}{1 + x^2}\right)dx where tan⁡−1x\tan^{-1}x takes only principal values, then the value of (log⁡e∣1+α∣−3π4)\left(\log_e|1 + \alpha| - \dfrac{3\pi}{4}\right) is

Tests: Spot that the integrand is e^u times du/dx.

Show solution
  1. Let u=9x+3tan⁡−1xu = 9x + 3\tan^{-1}x. Then dudx=9+31+x2=12+9x21+x2\dfrac{du}{dx} = 9 + \dfrac{3}{1 + x^2} = \dfrac{12 + 9x^2}{1 + x^2}.

    Why: The second factor is exactly the derivative of the exponent.

  2. So α=∫eu du=[e9x+3tan⁡−1x]01=e9+3π/4−1\alpha = \displaystyle\int e^u\,du = \left[e^{9x + 3\tan^{-1}x}\right]_0^1 = e^{9 + 3\pi/4} - 1.
  3. 1+α=e9+3π/41 + \alpha = e^{9 + 3\pi/4}, so log⁡e∣1+α∣=9+3π4\log_e|1 + \alpha| = 9 + \dfrac{3\pi}{4}.
  4. log⁡e∣1+α∣−3π4=9\log_e|1 + \alpha| - \dfrac{3\pi}{4} = 9.
AnswerAnswer: 9
Ask about this question
Q47

Mathematics, Question 47 (4 marks)

Definite integrals and L'Hôpital's rule · +4
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be a continuous odd function, which vanishes exactly at one point and f(1)=12f(1) = \dfrac{1}{2}. Suppose that F(x)=∫−1xf(t) dtF(x) = \displaystyle\int_{-1}^{x} f(t)\,dt for all x∈[−1,2]x \in [-1, 2] and G(x)=∫−1xt ∣f(f(t))∣ dtG(x) = \displaystyle\int_{-1}^{x} t\,|f(f(t))|\,dt for all x∈[−1,2]x \in [-1, 2]. If lim⁡x→1F(x)G(x)=114\lim_{x \to 1}\dfrac{F(x)}{G(x)} = \dfrac{1}{14}, then the value of f(12)f\left(\dfrac{1}{2}\right) is

Tests: Use oddness to get a 0/0 form, then L'Hôpital with the Fundamental Theorem of Calculus.

Show solution
  1. F(1)=∫−11f(t) dt=0F(1) = \displaystyle\int_{-1}^{1} f(t)\,dt = 0 since ff is odd.
  2. f(f(−t))=f(−f(t))=−f(f(t))f(f(-t)) = f(-f(t)) = -f(f(t)), so ∣f(f(t))∣|f(f(t))| is even and t ∣f(f(t))∣t\,|f(f(t))| is odd: G(1)=0G(1) = 0.
  3. The limit is 00\dfrac{0}{0}; by L'Hôpital's rule lim⁡x→1F′(x)G′(x)=f(1)1⋅∣f(f(1))∣=1/2∣f(1/2)∣\lim_{x \to 1}\dfrac{F'(x)}{G'(x)} = \dfrac{f(1)}{1 \cdot |f(f(1))|} = \dfrac{1/2}{|f(1/2)|}.
  4. 1/2∣f(1/2)∣=114⇒∣f(1/2)∣=7\dfrac{1/2}{|f(1/2)|} = \dfrac{1}{14} \Rightarrow |f(1/2)| = 7.
  5. An odd function has f(0)=0f(0) = 0, and that is its only zero. ff is continuous and f(1)>0f(1) > 0, so f>0f > 0 on (0,∞)(0, \infty): f(1/2)=7f(1/2) = 7.

    Why: If f(1/2) were negative, f would vanish again between 1/2 and 1.

AnswerAnswer: 7
Ask about this question
Q48

Mathematics, Question 48 (4 marks)

Vectors (linear combinations) · +4
Suppose that p⃗\vec{p}, q⃗\vec{q} and r⃗\vec{r} are three non-coplanar vectors in R3\mathbb{R}^3. Let the components of a vector s⃗\vec{s} along p⃗\vec{p}, q⃗\vec{q} and r⃗\vec{r} be 4, 3 and 5, respectively. If the components of this vector s⃗\vec{s} along (−p⃗+q⃗+r⃗)(-\vec{p} + \vec{q} + \vec{r}), (p⃗−q⃗+r⃗)(\vec{p} - \vec{q} + \vec{r}) and (−p⃗−q⃗+r⃗)(-\vec{p} - \vec{q} + \vec{r}) are xx, yy and zz, respectively, then the value of 2x+y+z2x + y + z is

Tests: Express one vector in two bases and compare coefficients.

Show solution
  1. Read "components along p⃗,q⃗,r⃗\vec{p}, \vec{q}, \vec{r}" as the coefficients when s⃗\vec{s} is written in this basis: s⃗=4p⃗+3q⃗+5r⃗\vec{s} = 4\vec{p} + 3\vec{q} + 5\vec{r}. Likewise s⃗=x(−p⃗+q⃗+r⃗)+y(p⃗−q⃗+r⃗)+z(−p⃗−q⃗+r⃗)\vec{s} = x(-\vec{p} + \vec{q} + \vec{r}) + y(\vec{p} - \vec{q} + \vec{r}) + z(-\vec{p} - \vec{q} + \vec{r}).

    Why: Non-coplanar vectors form a basis, so the coefficients are unique.

  2. Compare coefficients. p⃗\vec{p}: −x+y−z=4-x + y - z = 4; q⃗\vec{q}: x−y−z=3x - y - z = 3; r⃗\vec{r}: x+y+z=5x + y + z = 5.
  3. Add the first two: −2z=7⇒z=−72-2z = 7 \Rightarrow z = -\dfrac{7}{2}. Add the first and third: 2y=9⇒y=922y = 9 \Rightarrow y = \dfrac{9}{2}. Then x=5−y−z=4x = 5 - y - z = 4.
  4. 2x+y+z=8+92−72=92x + y + z = 8 + \dfrac{9}{2} - \dfrac{7}{2} = 9.
  5. Why everyone got marks: "component of s⃗\vec{s} along p⃗\vec{p}" usually means the projection s⃗⋅p^\vec{s} \cdot \hat{p}, and for non-perpendicular p⃗,q⃗,r⃗\vec{p}, \vec{q}, \vec{r} that reading does not fix x,y,zx, y, z. The official key printed 9 (the coefficient reading above) but, "considering the level of the question", awarded +4 to all candidates.
AnswerAnswer: 9 (the official key's value; +4 was awarded to every candidate for this question)
Ask about this question

Mathematics, Section 2: 8 questions, one or more options correct: +4 if only the bubble(s) of all the correct option(s) are darkened, 0 if none is darkened, −2 in all other cases (no partial marks)

Q49

Mathematics, Question 49 (4 marks)

Quadratic equations · +4 / −2
Let SS be the set of all non-zero real numbers α\alpha such that the quadratic equation αx2−x+α=0\alpha x^2 - x + \alpha = 0 has two distinct real roots x1x_1 and x2x_2 satisfying the inequality ∣x1−x2∣<1|x_1 - x_2| < 1. Which of the following intervals is(are) a subset(s) of SS?
  1. (A)(−12,−15)\left(-\dfrac{1}{2}, -\dfrac{1}{\sqrt{5}}\right)
  2. (B)(−15,0)\left(-\dfrac{1}{\sqrt{5}}, 0\right)
  3. (C)(0,15)\left(0, \dfrac{1}{\sqrt{5}}\right)
  4. (D)(15,12)\left(\dfrac{1}{\sqrt{5}}, \dfrac{1}{2}\right)

Tests: Combine the discriminant condition with the formula for the difference of roots.

Show solution
  1. Distinct real roots: D=1−4α2>0⇒∣α∣<12D = 1 - 4\alpha^2 > 0 \Rightarrow |\alpha| < \dfrac{1}{2}.
  2. ∣x1−x2∣=D∣α∣=1−4α2∣α∣<1⇒1−4α2<α2⇒α2>15|x_1 - x_2| = \dfrac{\sqrt{D}}{|\alpha|} = \dfrac{\sqrt{1 - 4\alpha^2}}{|\alpha|} < 1 \Rightarrow 1 - 4\alpha^2 < \alpha^2 \Rightarrow \alpha^2 > \dfrac{1}{5}.
  3. So S=(−12,−15)∪(15,12)S = \left(-\dfrac{1}{2}, -\dfrac{1}{\sqrt{5}}\right) \cup \left(\dfrac{1}{\sqrt{5}}, \dfrac{1}{2}\right).
  4. (A) is exactly the negative part of SS: true. (D) is exactly the positive part: true.
  5. (B) and (C) have ∣α∣<15|\alpha| < \dfrac{1}{\sqrt{5}}, where the roots are more than 1 apart: false.
AnswerAnswer: (A), (D)
Ask about this question
Q50

Mathematics, Question 50 (4 marks)

Inverse trigonometric functions · +4 / −2
If α=3sin⁡−1(611)\alpha = 3\sin^{-1}\left(\dfrac{6}{11}\right) and β=3cos⁡−1(49)\beta = 3\cos^{-1}\left(\dfrac{4}{9}\right), where the inverse trigonometric functions take only the principal values, then the correct option(s) is(are)
  1. (A)cos⁡β>0\cos\beta > 0
  2. (B)sin⁡β<0\sin\beta < 0
  3. (C)cos⁡(α+β)>0\cos(\alpha + \beta) > 0
  4. (D)cos⁡α<0\cos\alpha < 0

Tests: Locate a multiple of an inverse trig value by bounding it between known angles.

Show solution
  1. Bound sin⁡−1(6/11)\sin^{-1}(6/11): 611≈0.545\dfrac{6}{11} \approx 0.545 lies between sin⁡30∘=0.5\sin 30^\circ = 0.5 and sin⁡36∘≈0.588\sin 36^\circ \approx 0.588, so 30∘<sin⁡−1611<36∘30^\circ < \sin^{-1}\dfrac{6}{11} < 36^\circ and 90∘<α<108∘90^\circ < \alpha < 108^\circ.
  2. Bound cos⁡−1(4/9)\cos^{-1}(4/9): 49≈0.444\dfrac{4}{9} \approx 0.444 lies between cos⁡65∘≈0.423\cos 65^\circ \approx 0.423 and cos⁡60∘=0.5\cos 60^\circ = 0.5, so 60∘<cos⁡−149<65∘60^\circ < \cos^{-1}\dfrac{4}{9} < 65^\circ and 180∘<β<195∘180^\circ < \beta < 195^\circ.

    Why: cos⁻¹ is decreasing, so a smaller cosine means a larger angle.

  3. (D) α\alpha is in the second quadrant: cos⁡α<0\cos\alpha < 0, true.
  4. (A), (B) β\beta is in the third quadrant: cos⁡β<0\cos\beta < 0, so (A) is false; sin⁡β<0\sin\beta < 0, so (B) is true.
  5. (C) 270∘<α+β<303∘270^\circ < \alpha + \beta < 303^\circ, the fourth quadrant: cos⁡(α+β)>0\cos(\alpha + \beta) > 0, true.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q51

Mathematics, Question 51 (4 marks)

Ellipse and circle (tangents) · +4 / −2
Let E1E_1 and E2E_2 be two ellipses whose centers are at the origin. The major axes of E1E_1 and E2E_2 lie along the xx-axis and the yy-axis, respectively. Let SS be the circle x2+(y−1)2=2x^2 + (y - 1)^2 = 2. The straight line x+y=3x + y = 3 touches the curves SS, E1E_1 and E2E_2 at PP, QQ and RR, respectively. Suppose that PQ=PR=223PQ = PR = \dfrac{2\sqrt{2}}{3}. If e1e_1 and e2e_2 are the eccentricities of E1E_1 and E2E_2, respectively, then the correct expression(s) is(are)
  1. (A)e12+e22=4340e_1^2 + e_2^2 = \dfrac{43}{40}
  2. (B)e1e2=7210e_1 e_2 = \dfrac{\sqrt{7}}{2\sqrt{10}}
  3. (C)∣e12−e22∣=58|e_1^2 - e_2^2| = \dfrac{5}{8}
  4. (D)e1e2=34e_1 e_2 = \dfrac{\sqrt{3}}{4}

Tests: Find the points of contact of a given tangent line and read the ellipse from them.

Show solution
  1. PP is the foot of the perpendicular from the centre (0,1)(0, 1) to x+y=3x + y = 3: P=(1,2)P = (1, 2).
  2. Points on the line at distance 223\dfrac{2\sqrt{2}}{3} from PP: (1±23,2∓23)\left(1 \pm \dfrac{2}{3}, 2 \mp \dfrac{2}{3}\right), i.e. (53,43)\left(\dfrac{5}{3}, \dfrac{4}{3}\right) and (13,83)\left(\dfrac{1}{3}, \dfrac{8}{3}\right).

    Why: Moving 2√2/3 along the direction (1, −1)/√2 changes each coordinate by 2/3.

  3. For x2a2+y2b2=1\dfrac{x^2}{a^2} + \dfrac{y^2}{b^2} = 1, the tangent at (x0,y0)(x_0, y_0) is xx0a2+yy0b2=1\dfrac{xx_0}{a^2} + \dfrac{yy_0}{b^2} = 1. Matching with x3+y3=1\dfrac{x}{3} + \dfrac{y}{3} = 1: the point of contact is (a23,b23)\left(\dfrac{a^2}{3}, \dfrac{b^2}{3}\right).
  4. E1E_1 (major axis along xx, a>ba > b) touches at Q=(53,43)Q = \left(\dfrac{5}{3}, \dfrac{4}{3}\right): a2=5a^2 = 5, b2=4b^2 = 4, e12=1−45=15e_1^2 = 1 - \dfrac{4}{5} = \dfrac{1}{5}.
  5. E2E_2 (major axis along yy) touches at R=(13,83)R = \left(\dfrac{1}{3}, \dfrac{8}{3}\right): a2=1a^2 = 1, b2=8b^2 = 8, e22=1−18=78e_2^2 = 1 - \dfrac{1}{8} = \dfrac{7}{8}.
  6. (A) 15+78=4340\dfrac{1}{5} + \dfrac{7}{8} = \dfrac{43}{40}: true. (B) e1e2=740=7210e_1 e_2 = \sqrt{\dfrac{7}{40}} = \dfrac{\sqrt{7}}{2\sqrt{10}}: true; so (D) 34\dfrac{\sqrt{3}}{4} is false. (C) 78−15=2740≠58\dfrac{7}{8} - \dfrac{1}{5} = \dfrac{27}{40} \ne \dfrac{5}{8}: false.
AnswerAnswer: (A), (B)
Ask about this question
Q52

Mathematics, Question 52 (4 marks)

Hyperbola (tangent and normal) · +4 / −2
Consider the hyperbola H:x2−y2=1H : x^2 - y^2 = 1 and a circle SS with center N(x2,0)N(x_2, 0). Suppose that HH and SS touch each other at a point P(x1,y1)P(x_1, y_1) with x1>1x_1 > 1 and y1>0y_1 > 0. The common tangent to HH and SS at PP intersects the xx-axis at point MM. If (l,m)(l, m) is the centroid of the triangle ΔPMN\Delta PMN, then the correct expression(s) is(are)
  1. (A)dldx1=1−13x12\dfrac{dl}{dx_1} = 1 - \dfrac{1}{3x_1^2} for x1>1x_1 > 1
  2. (B)dmdx1=x13(x12−1)\dfrac{dm}{dx_1} = \dfrac{x_1}{3\left(\sqrt{x_1^2 - 1}\right)} for x1>1x_1 > 1
  3. (C)dldx1=1+13x12\dfrac{dl}{dx_1} = 1 + \dfrac{1}{3x_1^2} for x1>1x_1 > 1
  4. (D)dmdy1=13\dfrac{dm}{dy_1} = \dfrac{1}{3} for y1>0y_1 > 0

Tests: Use tangent and normal of a hyperbola to locate M and N, then differentiate the centroid.

Show solution
  1. Tangent to HH at PP: xx1−yy1=1xx_1 - yy_1 = 1. At y=0y = 0: M=(1x1,0)M = \left(\dfrac{1}{x_1}, 0\right).
  2. The circle touches HH at PP, so its centre NN lies on the normal to HH at PP: y−y1=−y1x1(x−x1)y - y_1 = -\dfrac{y_1}{x_1}(x - x_1). At y=0y = 0: x=2x1x = 2x_1, so N=(2x1,0)N = (2x_1, 0).

    Why: A circle's radius to the point of contact is perpendicular to the common tangent.

  3. Centroid: l=x1+1x1+2x13=x1+13x1l = \dfrac{x_1 + \frac{1}{x_1} + 2x_1}{3} = x_1 + \dfrac{1}{3x_1}, m=y1+0+03=y13m = \dfrac{y_1 + 0 + 0}{3} = \dfrac{y_1}{3}.
  4. (A), (C) dldx1=1−13x12\dfrac{dl}{dx_1} = 1 - \dfrac{1}{3x_1^2}: (A) true, (C) false.
  5. (B) y1=x12−1y_1 = \sqrt{x_1^2 - 1}, so m=x12−13m = \dfrac{\sqrt{x_1^2 - 1}}{3} and dmdx1=x13x12−1\dfrac{dm}{dx_1} = \dfrac{x_1}{3\sqrt{x_1^2 - 1}}: true.
  6. (D) m=y13m = \dfrac{y_1}{3}, so dmdy1=13\dfrac{dm}{dy_1} = \dfrac{1}{3}: true.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q53

Mathematics, Question 53 (4 marks)

Definite integration (periodic functions) · +4 / −2
The option(s) with the values of aa and LL that satisfy the following equation is(are) ∫04πet(sin⁡6at+cos⁡4at) dt∫0πet(sin⁡6at+cos⁡4at) dt=L\dfrac{\displaystyle\int_0^{4\pi} e^t(\sin^6 at + \cos^4 at)\,dt}{\displaystyle\int_0^{\pi} e^t(\sin^6 at + \cos^4 at)\,dt} = L?
  1. (A)a=2a = 2, L=e4π−1eπ−1L = \dfrac{e^{4\pi} - 1}{e^{\pi} - 1}
  2. (B)a=2a = 2, L=e4π+1eπ+1L = \dfrac{e^{4\pi} + 1}{e^{\pi} + 1}
  3. (C)a=4a = 4, L=e4π−1eπ−1L = \dfrac{e^{4\pi} - 1}{e^{\pi} - 1}
  4. (D)a=4a = 4, L=e4π+1eπ+1L = \dfrac{e^{4\pi} + 1}{e^{\pi} + 1}

Tests: Use periodicity to break an integral of e^t times a periodic function into a geometric series.

Show solution
  1. g(t)=sin⁡6at+cos⁡4atg(t) = \sin^6 at + \cos^4 at has period πa\dfrac{\pi}{a}, so for a=2a = 2 or a=4a = 4 it also has period π\pi.
  2. Split ∫04π=∑k=03∫kπ(k+1)π\displaystyle\int_0^{4\pi} = \sum_{k=0}^{3}\int_{k\pi}^{(k+1)\pi} and put t=u+kπt = u + k\pi: ∫kπ(k+1)πetg(t) dt=ekπ∫0πeug(u) du\displaystyle\int_{k\pi}^{(k+1)\pi} e^t g(t)\,dt = e^{k\pi}\int_0^{\pi} e^u g(u)\,du.

    Why: g(u + kπ) = g(u), and e^{u + kπ} = e^{kπ} e^u.

  3. So L=1+eπ+e2π+e3π=e4π−1eπ−1L = 1 + e^{\pi} + e^{2\pi} + e^{3\pi} = \dfrac{e^{4\pi} - 1}{e^{\pi} - 1} (geometric series).
  4. This holds for both a=2a = 2 and a=4a = 4: (A) and (C) are true. (B) and (D) give a different value of LL: false.
AnswerAnswer: (A), (C)
Ask about this question
Q54

Mathematics, Question 54 (4 marks)

Rolle's theorem · +4 / −2
Let f,g:[−1,2]→Rf, g : [-1, 2] \rightarrow \mathbb{R} be continuous functions which are twice differentiable on the interval (−1,2)(-1, 2). Let the values of ff and gg at the points −1-1, 00 and 22 be as given in the following table. In each of the intervals (−1,0)(-1, 0) and (0,2)(0, 2) the function (f−3g)′′(f - 3g)'' never vanishes. Then the correct statement(s) is(are)
x=−1x = -1x=0x = 0x=2x = 2
f(x)f(x)360
g(x)g(x)01−1
  1. (A)f′(x)−3g′(x)=0f'(x) - 3g'(x) = 0 has exactly three solutions in (−1,0)∪(0,2)(-1, 0) \cup (0, 2)
  2. (B)f′(x)−3g′(x)=0f'(x) - 3g'(x) = 0 has exactly one solution in (−1,0)(-1, 0)
  3. (C)f′(x)−3g′(x)=0f'(x) - 3g'(x) = 0 has exactly one solution in (0,2)(0, 2)
  4. (D)f′(x)−3g′(x)=0f'(x) - 3g'(x) = 0 has exactly two solutions in (−1,0)(-1, 0) and exactly two solutions in (0,2)(0, 2)

Tests: Combine Rolle's theorem (at least one root) with a non-vanishing second derivative (at most one root).

Show solution
  1. Let h=f−3gh = f - 3g. From the table: h(−1)=3−0=3h(-1) = 3 - 0 = 3, h(0)=6−3=3h(0) = 6 - 3 = 3, h(2)=0+3=3h(2) = 0 + 3 = 3.
  2. Rolle's theorem on [−1,0][-1, 0] and [0,2][0, 2]: h′h' has at least one zero in (−1,0)(-1, 0) and at least one in (0,2)(0, 2).
  3. h′′h'' never vanishes in each interval, so h′h' is strictly monotonic there and has at most one zero in each.

    Why: Two zeros of h′ in one interval would give, by Rolle again, a zero of h″ between them.

  4. So h′=f′−3g′h' = f' - 3g' has exactly one zero in (−1,0)(-1, 0) and exactly one in (0,2)(0, 2): (B) and (C) true.
  5. (A) says three in total, but there are exactly two: false. (D) says two in each: false.
AnswerAnswer: (B), (C)
Ask about this question
Q55

Mathematics, Question 55 (4 marks)

Definite integration · +4 / −2
Let f(x)=7tan⁡8x+7tan⁡6x−3tan⁡4x−3tan⁡2xf(x) = 7\tan^8 x + 7\tan^6 x - 3\tan^4 x - 3\tan^2 x for all x∈(−π2,π2)x \in \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right). Then the correct expression(s) is(are)
  1. (A)∫0π/4xf(x) dx=112\displaystyle\int_0^{\pi/4} x f(x)\,dx = \dfrac{1}{12}
  2. (B)∫0π/4f(x) dx=0\displaystyle\int_0^{\pi/4} f(x)\,dx = 0
  3. (C)∫0π/4xf(x) dx=16\displaystyle\int_0^{\pi/4} x f(x)\,dx = \dfrac{1}{6}
  4. (D)∫0π/4f(x) dx=1\displaystyle\int_0^{\pi/4} f(x)\,dx = 1

Tests: Pair powers of tan to create sec² x and integrate by substitution and by parts.

Show solution
  1. Factor: f(x)=7tan⁡6x(tan⁡2x+1)−3tan⁡2x(tan⁡2x+1)=(7tan⁡6x−3tan⁡2x)sec⁡2xf(x) = 7\tan^6 x(\tan^2 x + 1) - 3\tan^2 x(\tan^2 x + 1) = (7\tan^6 x - 3\tan^2 x)\sec^2 x.
  2. So f=ddx(tan⁡7x−tan⁡3x)f = \dfrac{d}{dx}\left(\tan^7 x - \tan^3 x\right). Let Φ(x)=tan⁡7x−tan⁡3x\Phi(x) = \tan^7 x - \tan^3 x; Φ(0)=0\Phi(0) = 0, Φ(π/4)=1−1=0\Phi(\pi/4) = 1 - 1 = 0.
  3. (B), (D) ∫0π/4f dx=Φ(π/4)−Φ(0)=0\displaystyle\int_0^{\pi/4} f\,dx = \Phi(\pi/4) - \Phi(0) = 0: (B) true, (D) false.
  4. By parts: ∫0π/4xf dx=[xΦ]0π/4−∫0π/4Φ dx=−∫0π/4(tan⁡7x−tan⁡3x) dx\displaystyle\int_0^{\pi/4} x f\,dx = \left[x\Phi\right]_0^{\pi/4} - \int_0^{\pi/4}\Phi\,dx = -\int_0^{\pi/4}(\tan^7 x - \tan^3 x)\,dx.
  5. tan⁡7x−tan⁡3x=tan⁡3x(tan⁡4x−1)=(tan⁡5x−tan⁡3x)sec⁡2x\tan^7 x - \tan^3 x = \tan^3 x(\tan^4 x - 1) = (\tan^5 x - \tan^3 x)\sec^2 x, so ∫0π/4Φ dx=[tan⁡6x6−tan⁡4x4]0π/4=16−14=−112\displaystyle\int_0^{\pi/4}\Phi\,dx = \left[\dfrac{\tan^6 x}{6} - \dfrac{\tan^4 x}{4}\right]_0^{\pi/4} = \dfrac{1}{6} - \dfrac{1}{4} = -\dfrac{1}{12}.
  6. (A), (C) ∫0π/4xf dx=112\displaystyle\int_0^{\pi/4} x f\,dx = \dfrac{1}{12}: (A) true, (C) false.
AnswerAnswer: (A), (B)
Ask about this question
Q56

Mathematics, Question 56 (4 marks)

Definite integrals (bounds) · +4 / −2
Let f′(x)=192x32+sin⁡4πxf'(x) = \dfrac{192x^3}{2 + \sin^4 \pi x} for all x∈Rx \in \mathbb{R} with f(12)=0f\left(\dfrac{1}{2}\right) = 0. If m≤∫1/21f(x) dx≤Mm \le \displaystyle\int_{1/2}^{1} f(x)\,dx \le M, then the possible values of mm and MM are
  1. (A)m=13m = 13, M=24M = 24
  2. (B)m=14m = \dfrac{1}{4}, M=12M = \dfrac{1}{2}
  3. (C)m=−11m = -11, M=0M = 0
  4. (D)m=1m = 1, M=12M = 12

Tests: Bound a derivative, integrate twice, and test which given bounds are consistent.

Show solution
  1. For x∈[1/2,1]x \in [1/2, 1]: 2≤2+sin⁡4πx≤32 \le 2 + \sin^4 \pi x \le 3, so 64x3≤f′(x)≤96x364x^3 \le f'(x) \le 96x^3.
  2. Integrate from 12\dfrac{1}{2} to xx (with f(1/2)=0f(1/2) = 0): 16x4−1≤f(x)≤24x4−3216x^4 - 1 \le f(x) \le 24x^4 - \dfrac{3}{2}.
  3. Integrate from 12\dfrac{1}{2} to 1, using ∫1/21x4 dx=15(1−132)=31160\displaystyle\int_{1/2}^{1} x^4\,dx = \dfrac{1}{5}\left(1 - \dfrac{1}{32}\right) = \dfrac{31}{160}: lower bound 16⋅31160−12=2.616 \cdot \dfrac{31}{160} - \dfrac{1}{2} = 2.6, upper bound 24⋅31160−34=3.924 \cdot \dfrac{31}{160} - \dfrac{3}{4} = 3.9.
  4. So 2.6≤∫1/21f dx≤3.92.6 \le \displaystyle\int_{1/2}^{1} f\,dx \le 3.9.
  5. (A) needs the integral ≥13\ge 13: false. (B) needs it ≤12\le \dfrac{1}{2}: false. (C) needs it ≤0\le 0: false. (D) 1≤I≤121 \le I \le 12 contains [2.6,3.9][2.6, 3.9]: true.
AnswerAnswer: (D)
Ask about this question

Mathematics, Section 3: 2 paragraphs with 2 questions each, one or more options correct: +4 if only the bubble(s) of all the correct option(s) are darkened, 0 if none is darkened, −2 in all other cases (no partial marks)

Q57

Mathematics, Question 57 (4 marks)

Probability (Bayes' theorem) · +4 / −2
Paragraph: Let n1n_1 and n2n_2 be the number of red and black balls, respectively, in box I. Let n3n_3 and n4n_4 be the number of red and black balls, respectively, in box II.

Question: One of the two boxes, box I and box II, was selected at random and a ball was drawn randomly out of this box. The ball was found to be red. If the probability that this red ball was drawn from box II is 13\dfrac{1}{3}, then the correct option(s) with the possible values of n1n_1, n2n_2, n3n_3 and n4n_4 is(are)
  1. (A)n1=3n_1 = 3, n2=3n_2 = 3, n3=5n_3 = 5, n4=15n_4 = 15
  2. (B)n1=3n_1 = 3, n2=6n_2 = 6, n3=10n_3 = 10, n4=50n_4 = 50
  3. (C)n1=8n_1 = 8, n2=6n_2 = 6, n3=5n_3 = 5, n4=20n_4 = 20
  4. (D)n1=6n_1 = 6, n2=12n_2 = 12, n3=5n_3 = 5, n4=20n_4 = 20

Tests: Apply Bayes' theorem with equally likely boxes to get a condition on the ball counts.

Show solution
  1. Let p1=n1n1+n2p_1 = \dfrac{n_1}{n_1 + n_2} and p2=n3n3+n4p_2 = \dfrac{n_3}{n_3 + n_4} be the chances of red from each box. By Bayes: P(II∣red)=12p212p1+12p2=13P(\text{II} \mid \text{red}) = \dfrac{\frac{1}{2}p_2}{\frac{1}{2}p_1 + \frac{1}{2}p_2} = \dfrac{1}{3}.
  2. So 3p2=p1+p23p_2 = p_1 + p_2, i.e. p1=2p2p_1 = 2p_2.
  3. (A) p1=36=12p_1 = \dfrac{3}{6} = \dfrac{1}{2}, p2=520=14p_2 = \dfrac{5}{20} = \dfrac{1}{4}: p1=2p2p_1 = 2p_2, true.
  4. (B) p1=39=13p_1 = \dfrac{3}{9} = \dfrac{1}{3}, p2=1060=16p_2 = \dfrac{10}{60} = \dfrac{1}{6}: true.
  5. (C) p1=814=47p_1 = \dfrac{8}{14} = \dfrac{4}{7}, p2=525=15p_2 = \dfrac{5}{25} = \dfrac{1}{5}: 2p2=25≠472p_2 = \dfrac{2}{5} \ne \dfrac{4}{7}, false. (D) p1=618=13p_1 = \dfrac{6}{18} = \dfrac{1}{3}, 2p2=252p_2 = \dfrac{2}{5}: false.
AnswerAnswer: (A), (B)
Ask about this question
Q58

Mathematics, Question 58 (4 marks)

Probability (total probability) · +4 / −2
Paragraph: Let n1n_1 and n2n_2 be the number of red and black balls, respectively, in box I. Let n3n_3 and n4n_4 be the number of red and black balls, respectively, in box II.

Question: A ball is drawn at random from box I and transferred to box II. If the probability of drawing a red ball from box I, after this transfer, is 13\dfrac{1}{3}, then the correct option(s) with the possible values of n1n_1 and n2n_2 is(are)
  1. (A)n1=4n_1 = 4 and n2=6n_2 = 6
  2. (B)n1=2n_1 = 2 and n2=3n_2 = 3
  3. (C)n1=10n_1 = 10 and n2=20n_2 = 20
  4. (D)n1=3n_1 = 3 and n2=6n_2 = 6

Tests: Use the law of total probability over the unseen transferred ball.

Show solution
  1. After one ball leaves box I, it has n1+n2−1n_1 + n_2 - 1 balls. Condition on the ball moved.
  2. P(red)=n1n1+n2⋅n1−1n1+n2−1+n2n1+n2⋅n1n1+n2−1=n1(n1+n2−1)(n1+n2)(n1+n2−1)=n1n1+n2P(\text{red}) = \dfrac{n_1}{n_1 + n_2}\cdot\dfrac{n_1 - 1}{n_1 + n_2 - 1} + \dfrac{n_2}{n_1 + n_2}\cdot\dfrac{n_1}{n_1 + n_2 - 1} = \dfrac{n_1(n_1 + n_2 - 1)}{(n_1 + n_2)(n_1 + n_2 - 1)} = \dfrac{n_1}{n_1 + n_2}.

    Why: Removing an unseen random ball does not change the chance for the next draw.

  3. So the condition is n1n1+n2=13\dfrac{n_1}{n_1 + n_2} = \dfrac{1}{3}, i.e. n2=2n1n_2 = 2n_1.
  4. (A) 4/104/10: false. (B) 2/52/5: false. (C) 10/30=1/310/30 = 1/3: true. (D) 3/9=1/33/9 = 1/3: true.
AnswerAnswer: (C), (D)
Ask about this question
Q59

Mathematics, Question 59 (4 marks)

Application of derivatives · +4 / −2
Paragraph: Let F:R→RF : \mathbb{R} \rightarrow \mathbb{R} be a thrice differentiable function. Suppose that F(1)=0F(1) = 0, F(3)=−4F(3) = -4 and F′(x)<0F'(x) < 0 for all x∈(1/2,3)x \in (1/2, 3). Let f(x)=xF(x)f(x) = xF(x) for all x∈Rx \in \mathbb{R}.

Question: The correct statement(s) is(are)
  1. (A)f′(1)<0f'(1) < 0
  2. (B)f(2)<0f(2) < 0
  3. (C)f′(x)≠0f'(x) \ne 0 for any x∈(1,3)x \in (1, 3)
  4. (D)f′(x)=0f'(x) = 0 for some x∈(1,3)x \in (1, 3)

Tests: Use the product rule and the signs of F and F′ to fix the sign of f′.

Show solution
  1. f(x)=xF(x)⇒f′(x)=F(x)+xF′(x)f(x) = xF(x) \Rightarrow f'(x) = F(x) + xF'(x).
  2. (A) f′(1)=F(1)+F′(1)=F′(1)<0f'(1) = F(1) + F'(1) = F'(1) < 0: true.
  3. (B) FF is decreasing on (1/2,3)(1/2, 3) and F(1)=0F(1) = 0, so F(2)<0F(2) < 0 and f(2)=2F(2)<0f(2) = 2F(2) < 0: true.
  4. (C) For x∈(1,3)x \in (1, 3): F(x)<F(1)=0F(x) < F(1) = 0, F′(x)<0F'(x) < 0 and x>0x > 0, so f′(x)=F(x)+xF′(x)<0f'(x) = F(x) + xF'(x) < 0. Hence f′(x)≠0f'(x) \ne 0: true.
  5. (D) contradicts (C): false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q60

Mathematics, Question 60 (4 marks)

Definite integration (by parts) · +4 / −2
Paragraph: Let F:R→RF : \mathbb{R} \rightarrow \mathbb{R} be a thrice differentiable function. Suppose that F(1)=0F(1) = 0, F(3)=−4F(3) = -4 and F′(x)<0F'(x) < 0 for all x∈(1/2,3)x \in (1/2, 3). Let f(x)=xF(x)f(x) = xF(x) for all x∈Rx \in \mathbb{R}.

Question: If ∫13x2F′(x) dx=−12\displaystyle\int_1^3 x^2 F'(x)\,dx = -12 and ∫13x3F′′(x) dx=40\displaystyle\int_1^3 x^3 F''(x)\,dx = 40, then the correct expression(s) is(are)
  1. (A)9f′(3)+f′(1)−32=09f'(3) + f'(1) - 32 = 0
  2. (B)∫13f(x) dx=12\displaystyle\int_1^3 f(x)\,dx = 12
  3. (C)9f′(3)−f′(1)+32=09f'(3) - f'(1) + 32 = 0
  4. (D)∫13f(x) dx=−12\displaystyle\int_1^3 f(x)\,dx = -12

Tests: Integrate by parts to convert integrals of F′ and F″ into values of f and f′.

Show solution
  1. By parts: ∫13x2F′ dx=[x2F]13−∫132xF dx=9(−4)−0−2∫13f dx\displaystyle\int_1^3 x^2F'\,dx = \left[x^2F\right]_1^3 - \int_1^3 2xF\,dx = 9(-4) - 0 - 2\int_1^3 f\,dx.

    Why: xF(x) is f(x).

  2. −36−2∫13f dx=−12⇒∫13f dx=−12-36 - 2\displaystyle\int_1^3 f\,dx = -12 \Rightarrow \int_1^3 f\,dx = -12: (D) true, (B) false.
  3. By parts: ∫13x3F′′ dx=[x3F′]13−3∫13x2F′ dx=27F′(3)−F′(1)+36=40\displaystyle\int_1^3 x^3F''\,dx = \left[x^3F'\right]_1^3 - 3\int_1^3 x^2F'\,dx = 27F'(3) - F'(1) + 36 = 40, so 27F′(3)−F′(1)=427F'(3) - F'(1) = 4.
  4. f′(x)=F(x)+xF′(x)f'(x) = F(x) + xF'(x): f′(3)=−4+3F′(3)f'(3) = -4 + 3F'(3) and f′(1)=F′(1)f'(1) = F'(1).
  5. (C) 9f′(3)−f′(1)=−36+27F′(3)−F′(1)=−36+4=−329f'(3) - f'(1) = -36 + 27F'(3) - F'(1) = -36 + 4 = -32, so 9f′(3)−f′(1)+32=09f'(3) - f'(1) + 32 = 0: true.
  6. (A) 9f′(3)+f′(1)=−36+27F′(3)+F′(1)=−32+2F′(1)9f'(3) + f'(1) = -36 + 27F'(3) + F'(1) = -32 + 2F'(1). Since F′(1)<0F'(1) < 0 this is less than −32-32, never 3232: false.
AnswerAnswer: (C), (D)
Ask about this question

Questions are quoted from JEE (Advanced) 2015 Paper 2 (English); figures are described in words. Every final answer is checked against the official final answer key. Where the official key accepts more than one answer, or gave every candidate full marks, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.