AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2023 Paper 2: Question Paper with Solutions and Answer Key

All 51 questions of JEE Advanced 2023 Paper 2 solved step by step: Mathematics, Physics and Chemistry, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2023 Paper 2: 51 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2023: Paper 1.

Mathematics, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Mathematics, Question 1 (3 marks)

Differential equations (from an integral equation) · +3 / −1
Let f:[1,∞)→Rf : [1, \infty) \rightarrow \mathbb{R} be a differentiable function such that f(1)=13f(1) = \dfrac{1}{3} and 3∫1xf(t) dt=xf(x)−x333\displaystyle\int_1^x f(t)\,dt = x f(x) - \dfrac{x^3}{3}, x∈[1,∞)x \in [1, \infty). Let ee denote the base of the natural logarithm. Then the value of f(e)f(e) is
  1. (A)e2+43\dfrac{e^2 + 4}{3}
  2. (B)log⁡e4+e3\dfrac{\log_e 4 + e}{3}
  3. (C)4e23\dfrac{4e^2}{3}
  4. (D)e2−43\dfrac{e^2 - 4}{3}

Tests: Turn an integral equation into a linear differential equation and solve it with an integrating factor.

Show solution
  1. Differentiate both sides with respect to xx: 3f(x)=f(x)+xf′(x)−x23f(x) = f(x) + x f'(x) - x^2, so xf′(x)−2f(x)=x2x f'(x) - 2f(x) = x^2.

    Why: Leibniz rule: the derivative of ∫₁ˣ f(t) dt is f(x).

  2. Divide by x3x^3: xf′(x)−2f(x)x3=1x\dfrac{x f'(x) - 2f(x)}{x^3} = \dfrac{1}{x}, and the left side is ddx(f(x)x2)\dfrac{d}{dx}\left(\dfrac{f(x)}{x^2}\right).

    Why: Integrating factor 1/x² for f′ − (2/x) f = x.

  3. Integrate: f(x)x2=ln⁡x+C\dfrac{f(x)}{x^2} = \ln x + C. At x=1x = 1: 13=0+C\dfrac{1}{3} = 0 + C, so C=13C = \dfrac{1}{3}.
  4. f(x)=x2ln⁡x+x23f(x) = x^2 \ln x + \dfrac{x^2}{3}, so f(e)=e2+e23=4e23f(e) = e^2 + \dfrac{e^2}{3} = \dfrac{4e^2}{3}.
AnswerAnswer: (C) 4e23\dfrac{4e^2}{3}
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Probability (infinite series of events) · +3 / −1
Consider an experiment of tossing a coin repeatedly until the outcomes of two consecutive tosses are same. If the probability of a random toss resulting in head is 13\dfrac{1}{3}, then the probability that the experiment stops with head is
  1. (A)13\dfrac{1}{3}
  2. (B)521\dfrac{5}{21}
  3. (C)421\dfrac{4}{21}
  4. (D)27\dfrac{2}{7}

Tests: Add the probabilities of all alternating sequences that end in two heads as a geometric series.

Show solution
  1. Let p=P(H)=13p = P(H) = \dfrac{1}{3}, q=P(T)=23q = P(T) = \dfrac{2}{3}. The experiment stops with head exactly when the tosses alternate and then end in HHHH.

    Why: Before the first repeat, consecutive tosses must differ.

  2. The stopping sequences are HHHH, THHTHH, HTHHHTHH, THTHHTHTHH, ... with probabilities p2p^2, qp2qp^2, pq⋅p2pq \cdot p^2, qpq⋅p2q p q \cdot p^2, ...
  3. Sum =p2[(1+q)+pq(1+q)+(pq)2(1+q)+⋯ ]=p2(1+q)1−pq= p^2\left[(1 + q) + pq(1 + q) + (pq)^2(1 + q) + \cdots\right] = \dfrac{p^2(1 + q)}{1 - pq}.

    Why: Group the terms in pairs; each pair is pq times the previous pair.

  4. =19⋅531−29=527⋅97=521= \dfrac{\frac{1}{9} \cdot \frac{5}{3}}{1 - \frac{2}{9}} = \dfrac{5}{27} \cdot \dfrac{9}{7} = \dfrac{5}{21}.
AnswerAnswer: (B) 521\dfrac{5}{21}
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Inverse trigonometric functions · +3 / −1
For any y∈Ry \in \mathbb{R}, let cot⁡−1(y)∈(0,π)\cot^{-1}(y) \in (0, \pi) and tan⁡−1(y)∈(−π2,π2)\tan^{-1}(y) \in \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right). Then the sum of all the solutions of the equation tan⁡−1(6y9−y2)+cot⁡−1(9−y26y)=2π3\tan^{-1}\left(\dfrac{6y}{9 - y^2}\right) + \cot^{-1}\left(\dfrac{9 - y^2}{6y}\right) = \dfrac{2\pi}{3} for 0<∣y∣<30 < |y| < 3, is equal to
  1. (A)23−32\sqrt{3} - 3
  2. (B)3−233 - 2\sqrt{3}
  3. (C)43−64\sqrt{3} - 6
  4. (D)6−436 - 4\sqrt{3}

Tests: Use the correct branch of cot⁻¹(1/u) for positive and negative u when solving an inverse trig equation.

Show solution
  1. Let u=6y9−y2u = \dfrac{6y}{9 - y^2}. For 0<∣y∣<30 < |y| < 3, 9−y2>09 - y^2 > 0, so uu has the sign of yy. Also cot⁡−11u=tan⁡−1u\cot^{-1}\dfrac{1}{u} = \tan^{-1}u if u>0u > 0 and =π+tan⁡−1u= \pi + \tan^{-1}u if u<0u < 0.

    Why: cot⁻¹ takes values in (0, π), so a negative argument gives an angle in (π/2, π).

  2. 0<y<30 < y < 3: 2tan⁡−1u=2π32\tan^{-1}u = \dfrac{2\pi}{3}, so u=3u = \sqrt{3}: 3y2+6y−93=0\sqrt{3}y^2 + 6y - 9\sqrt{3} = 0, i.e. y2+23y−9=0y^2 + 2\sqrt{3}y - 9 = 0, y=−3±23y = -\sqrt{3} \pm 2\sqrt{3}. Keep y=3y = \sqrt{3}.
  3. −3<y<0-3 < y < 0: 2tan⁡−1u+π=2π32\tan^{-1}u + \pi = \dfrac{2\pi}{3}, so tan⁡−1u=−π6\tan^{-1}u = -\dfrac{\pi}{6}, u=−13u = -\dfrac{1}{\sqrt{3}}: y2−63y−9=0y^2 - 6\sqrt{3}y - 9 = 0, y=33±6y = 3\sqrt{3} \pm 6. Keep y=33−6≈−0.80y = 3\sqrt{3} - 6 \approx -0.80.
  4. Sum of solutions =3+33−6=43−6= \sqrt{3} + 3\sqrt{3} - 6 = 4\sqrt{3} - 6.
AnswerAnswer: (C) 43−64\sqrt{3} - 6
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Vectors (section formula, coplanarity) · +3 / −1
Let the position vectors of the points P,Q,RP, Q, R and SS be a⃗=i^+2j^−5k^\vec{a} = \hat{i} + 2\hat{j} - 5\hat{k}, b⃗=3i^+6j^+3k^\vec{b} = 3\hat{i} + 6\hat{j} + 3\hat{k}, c⃗=175i^+165j^+7k^\vec{c} = \dfrac{17}{5}\hat{i} + \dfrac{16}{5}\hat{j} + 7\hat{k} and d⃗=2i^+j^+k^\vec{d} = 2\hat{i} + \hat{j} + \hat{k}, respectively. Then which of the following statements is true?
  1. (A)The points P,Q,RP, Q, R and SS are NOT coplanar
  2. (B)b⃗+2d⃗3\dfrac{\vec{b} + 2\vec{d}}{3} is the position vector of a point which divides PRPR internally in the ratio 5:45 : 4
  3. (C)b⃗+2d⃗3\dfrac{\vec{b} + 2\vec{d}}{3} is the position vector of a point which divides PRPR externally in the ratio 5:45 : 4
  4. (D)The square of the magnitude of the vector b⃗×d⃗\vec{b} \times \vec{d} is 95

Tests: Check a section-formula claim, coplanarity by the scalar triple product, and a cross product.

Show solution
  1. b⃗+2d⃗3=(3+4)i^+(6+2)j^+(3+2)k^3=73i^+83j^+53k^\dfrac{\vec{b} + 2\vec{d}}{3} = \dfrac{(3 + 4)\hat{i} + (6 + 2)\hat{j} + (3 + 2)\hat{k}}{3} = \dfrac{7}{3}\hat{i} + \dfrac{8}{3}\hat{j} + \dfrac{5}{3}\hat{k}.
  2. (B): internal 5:45 : 4 on PRPR gives 4a⃗+5c⃗9=(4+17)i^+(8+16)j^+(−20+35)k^9=73i^+83j^+53k^\dfrac{4\vec{a} + 5\vec{c}}{9} = \dfrac{(4 + 17)\hat{i} + (8 + 16)\hat{j} + (-20 + 35)\hat{k}}{9} = \dfrac{7}{3}\hat{i} + \dfrac{8}{3}\hat{j} + \dfrac{5}{3}\hat{k}. True, so (C) (external division, 5c⃗−4a⃗1\dfrac{5\vec{c} - 4\vec{a}}{1}) is false.
  3. (A): PQ⃗=(2,4,8)\vec{PQ} = (2, 4, 8), PR⃗=(125,65,12)\vec{PR} = \left(\dfrac{12}{5}, \dfrac{6}{5}, 12\right), PS⃗=(1,−1,6)\vec{PS} = (1, -1, 6). Their scalar triple product is 2(365+12)−4(725−12)+8(−125−65)=192−48−1445=02\left(\dfrac{36}{5} + 12\right) - 4\left(\dfrac{72}{5} - 12\right) + 8\left(-\dfrac{12}{5} - \dfrac{6}{5}\right) = \dfrac{192 - 48 - 144}{5} = 0. The points are coplanar, so (A) is false.
  4. (D): b⃗×d⃗=(6−3)i^−(3−6)j^+(3−12)k^=3i^+3j^−9k^\vec{b} \times \vec{d} = (6 - 3)\hat{i} - (3 - 6)\hat{j} + (3 - 12)\hat{k} = 3\hat{i} + 3\hat{j} - 9\hat{k}, with ∣b⃗×d⃗∣2=9+9+81=99≠95|\vec{b} \times \vec{d}|^2 = 9 + 9 + 81 = 99 \ne 95. False.
AnswerAnswer: (B)
Ask about this question

Mathematics, Section 2: 3 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q5

Mathematics, Question 5 (4 marks)

Matrices and determinants · +4 / −2
Let M=(aij)M = (a_{ij}), i,j∈{1,2,3}i, j \in \{1, 2, 3\}, be the 3×33 \times 3 matrix such that aij=1a_{ij} = 1 if j+1j + 1 is divisible by ii, otherwise aij=0a_{ij} = 0. Then which of the following statements is(are) true?
  1. (A)MM is invertible
  2. (B)There exists a nonzero column matrix (a1a2a3)\begin{pmatrix} a_1 \\ a_2 \\ a_3 \end{pmatrix} such that M(a1a2a3)=(−a1−a2−a3)M\begin{pmatrix} a_1 \\ a_2 \\ a_3 \end{pmatrix} = \begin{pmatrix} -a_1 \\ -a_2 \\ -a_3 \end{pmatrix}
  3. (C)The set {X∈R3:MX=0}≠{0}\{X \in \mathbb{R}^3 : MX = \mathbf{0}\} \ne \{\mathbf{0}\}, where 0=(000)\mathbf{0} = \begin{pmatrix} 0 \\ 0 \\ 0 \end{pmatrix}
  4. (D)The matrix (M−2I)(M - 2I) is invertible, where II is the 3×33 \times 3 identity matrix

Tests: Build a matrix from a divisibility rule and test singularity of M, M + I and M − 2I with determinants.

Show solution
  1. Row 1 (i=1i = 1 divides everything): (1,1,1)(1, 1, 1). Row 2 (j+1j + 1 even, j=1,3j = 1, 3): (1,0,1)(1, 0, 1). Row 3 (j+1=3j + 1 = 3, j=2j = 2): (0,1,0)(0, 1, 0). So M=(111101010)M = \begin{pmatrix} 1 & 1 & 1 \\ 1 & 0 & 1 \\ 0 & 1 & 0 \end{pmatrix}.
  2. (A) and (C): det⁡M=1(0−1)−1(0−0)+1(1−0)=0\det M = 1(0 - 1) - 1(0 - 0) + 1(1 - 0) = 0. MM is not invertible, so (A) is false, and MX=0MX = \mathbf{0} has a nonzero solution (for example X=(1,0,−1)TX = (1, 0, -1)^T), so (C) is true.
  3. (B): we need (M+I)X=0(M + I)X = \mathbf{0} with X≠0X \ne \mathbf{0}. det⁡(M+I)=det⁡(211111011)=2(0)−1(1)+1(1)=0\det(M + I) = \det\begin{pmatrix} 2 & 1 & 1 \\ 1 & 1 & 1 \\ 0 & 1 & 1 \end{pmatrix} = 2(0) - 1(1) + 1(1) = 0, so such XX exists (e.g. (0,1,−1)T(0, 1, -1)^T). True.
  4. (D): det⁡(M−2I)=det⁡(−1111−2101−2)=−1(4−1)−1(−2−0)+1(1−0)=0\det(M - 2I) = \det\begin{pmatrix} -1 & 1 & 1 \\ 1 & -2 & 1 \\ 0 & 1 & -2 \end{pmatrix} = -1(4 - 1) - 1(-2 - 0) + 1(1 - 0) = 0. Not invertible: false.

    Why: The eigenvalues of M are 0, −1 and 2 (their sum is the trace, 1).

AnswerAnswer: (B), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Continuity and differentiability (greatest integer function) · +4 / −2
Let f:(0,1)→Rf : (0, 1) \rightarrow \mathbb{R} be the function defined as f(x)=[4x](x−14)2(x−12)f(x) = [4x]\left(x - \dfrac{1}{4}\right)^2\left(x - \dfrac{1}{2}\right), where [x][x] denotes the greatest integer less than or equal to xx. Then which of the following statements is(are) true?
  1. (A)The function ff is discontinuous exactly at one point in (0,1)(0, 1)
  2. (B)There is exactly one point in (0,1)(0, 1) at which the function ff is continuous but NOT differentiable
  3. (C)The function ff is NOT differentiable at more than three points in (0,1)(0, 1)
  4. (D)The minimum value of the function ff is −1512-\dfrac{1}{512}

Tests: Test continuity and differentiability of [4x] times a polynomial at each jump of the floor function, and find its minimum.

Show solution
  1. Let g(x)=(x−14)2(x−12)g(x) = \left(x - \dfrac{1}{4}\right)^2\left(x - \dfrac{1}{2}\right). [4x]=0,1,2,3[4x] = 0, 1, 2, 3 on (0,14)\left(0, \dfrac{1}{4}\right), [14,12)\left[\dfrac{1}{4}, \dfrac{1}{2}\right), [12,34)\left[\dfrac{1}{2}, \dfrac{3}{4}\right), [34,1)\left[\dfrac{3}{4}, 1\right); only the jumps at 14,12,34\dfrac{1}{4}, \dfrac{1}{2}, \dfrac{3}{4} need checking.
  2. At x=14x = \dfrac{1}{4}: gg has a double zero, so gg and g′g' are both 0 there; f=0⋅gf = 0 \cdot g on the left and 1⋅g1 \cdot g on the right are continuous and both have derivative 0. Differentiable.
  3. At x=12x = \dfrac{1}{2}: g=0g = 0, so ff is continuous. g′(12)=(14)2=116g'\left(\dfrac{1}{2}\right) = \left(\dfrac{1}{4}\right)^2 = \dfrac{1}{16}, so the left derivative is 1⋅1161 \cdot \dfrac{1}{16} and the right derivative is 2⋅1162 \cdot \dfrac{1}{16}. Continuous but not differentiable.
  4. At x=34x = \dfrac{3}{4}: g=14⋅14=116≠0g = \dfrac{1}{4} \cdot \dfrac{1}{4} = \dfrac{1}{16} \ne 0, so ff jumps from 216\dfrac{2}{16} to 316\dfrac{3}{16}: discontinuous. So (A) is true (only 34\dfrac{3}{4}), (B) is true (only 12\dfrac{1}{2}), and (C) is false (non-differentiable only at 12,34\dfrac{1}{2}, \dfrac{3}{4}).
  5. (D): f<0f < 0 only on (14,12)\left(\dfrac{1}{4}, \dfrac{1}{2}\right), where f=gf = g. g′(x)=(x−14)(3x−54)=0g'(x) = \left(x - \dfrac{1}{4}\right)\left(3x - \dfrac{5}{4}\right) = 0 at x=512x = \dfrac{5}{12}, giving g=(16)2(−112)=−1432g = \left(\dfrac{1}{6}\right)^2\left(-\dfrac{1}{12}\right) = -\dfrac{1}{432}. The minimum is −1432-\dfrac{1}{432}, so (D) is false.
AnswerAnswer: (A), (B)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Convex functions and roots · +4 / −2
Let SS be the set of all twice differentiable functions ff from R\mathbb{R} to R\mathbb{R} such that d2fdx2(x)>0\dfrac{d^2 f}{dx^2}(x) > 0 for all x∈(−1,1)x \in (-1, 1). For f∈Sf \in S, let XfX_f be the number of points x∈(−1,1)x \in (-1, 1) for which f(x)=xf(x) = x. Then which of the following statements is(are) true?
  1. (A)There exists a function f∈Sf \in S such that Xf=0X_f = 0
  2. (B)For every function f∈Sf \in S, we have Xf≤2X_f \le 2
  3. (C)There exists a function f∈Sf \in S such that Xf=2X_f = 2
  4. (D)There does NOT exist any function ff in SS such that Xf=1X_f = 1

Tests: Use Rolle's theorem to bound the zeros of a strictly convex function, and build examples for each count.

Show solution
  1. Let h(x)=f(x)−xh(x) = f(x) - x. Then h′′(x)=f′′(x)>0h''(x) = f''(x) > 0 on (−1,1)(-1, 1), and XfX_f is the number of zeros of hh in (−1,1)(-1, 1).
  2. (B): if hh had three zeros in (−1,1)(-1, 1), Rolle's theorem would give two zeros of h′h', and then a zero of h′′h'' between them, contradicting h′′>0h'' > 0. So Xf≤2X_f \le 2 always. True.
  3. (A): f(x)=x2+1f(x) = x^2 + 1 gives x2−x+1=0x^2 - x + 1 = 0, which has no real root. Xf=0X_f = 0: true.
  4. (C): f(x)=x2+x−14f(x) = x^2 + x - \dfrac{1}{4} gives x2=14x^2 = \dfrac{1}{4}, x=±12x = \pm\dfrac{1}{2}, both in (−1,1)(-1, 1). Xf=2X_f = 2: true.
  5. (D): f(x)=x2f(x) = x^2 gives x2=xx^2 = x, so x=0x = 0 or x=1x = 1; only x=0x = 0 lies in the open interval (−1,1)(-1, 1). Xf=1X_f = 1 is possible, so (D) is false.
AnswerAnswer: (A), (B), (C)
Ask about this question

Mathematics, Section 3: 6 questions, answer is a non-negative integer: +4 if only the correct integer is entered, 0 in all other cases

Q8

Mathematics, Question 8 (4 marks)

Definite integrals (functions defined by integrals) · +4
For x∈Rx \in \mathbb{R}, let tan⁡−1(x)∈(−π2,π2)\tan^{-1}(x) \in \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right). Then the minimum value of the function f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} defined by f(x)=∫0xtan⁡−1xe(t−cos⁡t)1+t2023 dtf(x) = \displaystyle\int_0^{x\tan^{-1}x} \dfrac{e^{(t - \cos t)}}{1 + t^{2023}}\,dt is

Tests: Find the minimum of an integral-defined function from the sign of its integrand and its upper limit.

Show solution
  1. The upper limit u(x)=xtan⁡−1x≥0u(x) = x\tan^{-1}x \ge 0 for every xx, because xx and tan⁡−1x\tan^{-1}x always have the same sign; u=0u = 0 only at x=0x = 0.
  2. For t≥0t \ge 0 the integrand et−cos⁡t1+t2023\dfrac{e^{t - \cos t}}{1 + t^{2023}} is positive (numerator >0> 0, denominator ≥1\ge 1).

    Why: Only t in [0, u] matters, so the odd power 2023 never makes the denominator zero or negative.

  3. So f(x)=∫0u(x)(positive) dt≥0f(x) = \displaystyle\int_0^{u(x)} (\text{positive})\,dt \ge 0, with equality exactly when u(x)=0u(x) = 0, i.e. x=0x = 0.
  4. Minimum value =f(0)=0= f(0) = 0.
AnswerAnswer: 0
Ask about this question
Q9

Mathematics, Question 9 (4 marks)

Linear differential equations · +4
For x∈Rx \in \mathbb{R}, let y(x)y(x) be a solution of the differential equation (x2−5)dydx−2xy=−2x(x2−5)2(x^2 - 5)\dfrac{dy}{dx} - 2xy = -2x(x^2 - 5)^2 such that y(2)=7y(2) = 7. Then the maximum value of the function y(x)y(x) is

Tests: Recognise the derivative of a quotient in a linear differential equation and maximise the solution.

Show solution
  1. Divide by (x2−5)2(x^2 - 5)^2: (x2−5)y′−2xy(x2−5)2=−2x\dfrac{(x^2 - 5)y' - 2xy}{(x^2 - 5)^2} = -2x. The left side is ddx(yx2−5)\dfrac{d}{dx}\left(\dfrac{y}{x^2 - 5}\right).

    Why: Quotient rule: (y/v)′ = (v y′ − v′ y)/v² with v = x² − 5.

  2. Integrate: yx2−5=−x2+C\dfrac{y}{x^2 - 5} = -x^2 + C. At x=2x = 2: 7−1=−4+C\dfrac{7}{-1} = -4 + C, so C=−3C = -3.
  3. y=(x2−5)(−x2−3)=−(x4−2x2−15)=16−(x2−1)2y = (x^2 - 5)(-x^2 - 3) = -(x^4 - 2x^2 - 15) = 16 - (x^2 - 1)^2.
  4. The maximum is 1616, at x2=1x^2 = 1 (x=±1x = \pm 1).
AnswerAnswer: 16
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Permutations and conditional probability · +4
Let XX be the set of all five digit numbers formed using 1, 2, 2, 2, 4, 4, 0. For example, 22240 is in XX while 02244 and 44422 are not in XX. Suppose that each element of XX has an equal chance of being chosen. Let pp be the conditional probability that an element chosen at random is a multiple of 20 given that it is a multiple of 5. Then the value of 38p38p is equal to

Tests: Count arrangements of a multiset with repeated digits and use them for a conditional probability.

Show solution
  1. A multiple of 5 must end in 0 (there is no 5). Then the first four digits are chosen from 1,2,2,2,4,41, 2, 2, 2, 4, 4 (no leading-zero issue, since 0 is used at the end).
  2. Count 4-digit arrangements from {1,2,2,2,4,4}\{1, 2, 2, 2, 4, 4\} by how many 1s, 2s, 4s are used. Without 1: (2,2)(2, 2): 4!2!2!=6\dfrac{4!}{2!2!} = 6; (3,1)(3, 1): 4!3!=4\dfrac{4!}{3!} = 4. With 1: (3,0)(3, 0): 4; (2,1)(2, 1): 4!2!=12\dfrac{4!}{2!} = 12; (1,2)(1, 2): 12. Total =10+28=38= 10 + 28 = 38.
  3. A number ending in 0 is a multiple of 20 exactly when its tens digit is even, i.e. the fourth digit is not 1.
  4. Fourth digit 1: the first three come from {2,2,2,4,4}\{2, 2, 2, 4, 4\}: 222222 (1), two 2s and one 4 (3), one 2 and two 4s (3), so 7. Favourable =38−7=31= 38 - 7 = 31.
  5. p=3138p = \dfrac{31}{38}, so 38p=3138p = 31.
AnswerAnswer: 31
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Complex numbers (roots of unity) · +4
Let A1,A2,A3,…,A8A_1, A_2, A_3, \ldots, A_8 be the vertices of a regular octagon that lie on a circle of radius 2. Let PP be a point on the circle and let PAiPA_i denote the distance between the points PP and AiA_i for i=1,2,…,8i = 1, 2, \ldots, 8. If PP varies over the circle, then the maximum value of the product PA1⋅PA2⋯PA8PA_1 \cdot PA_2 \cdots PA_8, is

Tests: Turn a product of distances to regular polygon vertices into |z⁸ − R⁸| using roots of unity.

Show solution
  1. Place the centre at the origin and the vertices at ak=2ωka_k = 2\omega^k, k=0,…,7k = 0, \ldots, 7, where ω=eiπ/4\omega = e^{i\pi/4}. These are the roots of z8=28=256z^8 = 2^8 = 256.
  2. So ∏k(z−ak)=z8−256\displaystyle\prod_{k}(z - a_k) = z^8 - 256, and for PP at zz: PA1⋯PA8=∣z8−256∣PA_1 \cdots PA_8 = |z^8 - 256|.
  3. With z=2eiθz = 2e^{i\theta}: ∣256ei8θ−256∣=256∣ei8θ−1∣=256⋅2∣sin⁡4θ∣|256e^{i8\theta} - 256| = 256|e^{i8\theta} - 1| = 256 \cdot 2|\sin 4\theta|.

    Why: |e^{iφ} − 1| = 2|sin(φ/2)|.

  4. The maximum is 512512, when sin⁡4θ=±1\sin 4\theta = \pm 1 (PP midway between two adjacent vertices).
AnswerAnswer: 512
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Determinants and counting · +4
Let R={(a3bc2d050):a,b,c,d∈{0,3,5,7,11,13,17,19}}R = \left\{\begin{pmatrix} a & 3 & b \\ c & 2 & d \\ 0 & 5 & 0 \end{pmatrix} : a, b, c, d \in \{0, 3, 5, 7, 11, 13, 17, 19\}\right\}. Then the number of invertible matrices in RR is

Tests: Reduce invertibility to a product condition and count it using unique prime factorisation.

Show solution
  1. Expand along row 3: only the entry 5 in position (3,2)(3, 2) is nonzero, with cofactor sign (−1)3+2=−1(-1)^{3+2} = -1. So det⁡=−5(ad−bc)=5(bc−ad)\det = -5(ad - bc) = 5(bc - ad), and the matrix is invertible iff ad≠bcad \ne bc.
  2. Total matrices: 84=40968^4 = 4096. Count ad=bcad = bc. Products equal to 0: ad=0ad = 0 in 8+8−1=158 + 8 - 1 = 15 ways, same for bcbc, so 15×15=22515 \times 15 = 225.
  3. Nonzero products: a,b,c,da, b, c, d are among the 7 primes 3,5,…,193, 5, \ldots, 19, and by unique factorisation ad=bcad = bc means {b,c}={a,d}\{b, c\} = \{a, d\}. If a=da = d (7 ways), (b,c)(b, c) is forced: 7. If a≠da \ne d (42 ways), (b,c)(b, c) has 2 orders: 84. Total 91.
  4. Singular matrices: 225+91=316225 + 91 = 316. Invertible: 4096−316=37804096 - 316 = 3780.
AnswerAnswer: 3780
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Circles (common tangents, radical axis) · +4
Let C1C_1 be the circle of radius 1 with center at the origin. Let C2C_2 be the circle of radius rr with center at the point A=(4,1)A = (4, 1), where 1<r<31 < r < 3. Two distinct common tangents PQPQ and STST of C1C_1 and C2C_2 are drawn. The tangent PQPQ touches C1C_1 at PP and C2C_2 at QQ. The tangent STST touches C1C_1 at SS and C2C_2 at TT. Mid points of the line segments PQPQ and STST are joined to form a line which meets the xx-axis at a point BB. If AB=5AB = \sqrt{5}, then the value of r2r^2 is

Tests: Use the fact that midpoints of common tangent segments lie on the radical axis.

Show solution
  1. The midpoint MM of a common tangent segment PQPQ has equal tangent lengths MP=MQMP = MQ to both circles, so it lies on the radical axis. So the line through the two midpoints is the radical axis.

    Why: Points with equal tangent lengths to two circles form their radical axis.

  2. C1:x2+y2−1=0C_1: x^2 + y^2 - 1 = 0, C2:x2+y2−8x−2y+17−r2=0C_2: x^2 + y^2 - 8x - 2y + 17 - r^2 = 0. Subtracting: radical axis 8x+2y−18+r2=08x + 2y - 18 + r^2 = 0.
  3. It meets the xx-axis at B=(18−r28,0)B = \left(\dfrac{18 - r^2}{8}, 0\right). Then AB2=(4−18−r28)2+1=5AB^2 = \left(4 - \dfrac{18 - r^2}{8}\right)^2 + 1 = 5, so 14+r28=±2\dfrac{14 + r^2}{8} = \pm 2.
  4. 14+r2=1614 + r^2 = 16 gives r2=2r^2 = 2 (r=2r = \sqrt{2}, inside (1,3)(1, 3)); 14+r2=−1614 + r^2 = -16 is impossible.
AnswerAnswer: 2
Ask about this question

Mathematics, Section 4: 2 paragraphs with 2 questions each, numerical value answer (truncate or round off to two decimal places): +3 if only the correct value is entered, 0 in all other cases

Q14

Mathematics, Question 14 (3 marks)

Properties of triangles · +3
Paragraph "I": Consider an obtuse angled triangle ABCABC in which the difference between the largest and the smallest angle is π2\dfrac{\pi}{2} and whose sides are in arithmetic progression. Suppose that the vertices of this triangle lie on a circle of radius 1.

Question: Let aa be the area of the triangle ABCABC. Then the value of (64a)2(64a)^2 is

Tests: Combine an angle condition, sides in AP and the sine rule to find the triangle's area.

Show solution
  1. Let AA be the smallest angle and CC the largest: C=A+π2C = A + \dfrac{\pi}{2} and B=π−A−C=π2−2AB = \pi - A - C = \dfrac{\pi}{2} - 2A. Then sin⁡C=cos⁡A\sin C = \cos A and sin⁡B=cos⁡2A\sin B = \cos 2A.
  2. Sides in AP with the middle side opposite BB: 2sin⁡B=sin⁡A+sin⁡C2\sin B = \sin A + \sin C, so 2(cos⁡A−sin⁡A)(cos⁡A+sin⁡A)=sin⁡A+cos⁡A2(\cos A - \sin A)(\cos A + \sin A) = \sin A + \cos A, giving cos⁡A−sin⁡A=12\cos A - \sin A = \dfrac{1}{2}.

    Why: Sine rule with R = 1: each side is 2 sin of its opposite angle.

  3. Squaring: 1−sin⁡2A=141 - \sin 2A = \dfrac{1}{4}, so sin⁡2A=34\sin 2A = \dfrac{3}{4}. Since B>0B > 0, 2A<π22A < \dfrac{\pi}{2}, so cos⁡2A=74\cos 2A = \dfrac{\sqrt{7}}{4}.
  4. Area a=2R2sin⁡Asin⁡Bsin⁡C=2sin⁡Acos⁡Acos⁡2A=sin⁡2Acos⁡2A=34⋅74=3716a = 2R^2\sin A\sin B\sin C = 2\sin A\cos A\cos 2A = \sin 2A\cos 2A = \dfrac{3}{4} \cdot \dfrac{\sqrt{7}}{4} = \dfrac{3\sqrt{7}}{16}.
  5. (64a)2=(127)2=144×7=1008(64a)^2 = (12\sqrt{7})^2 = 144 \times 7 = 1008.
AnswerAnswer: 1008
Ask about this question
Q15

Mathematics, Question 15 (3 marks)

Properties of triangles (inradius) · +3
Paragraph "I": Consider an obtuse angled triangle ABCABC in which the difference between the largest and the smallest angle is π2\dfrac{\pi}{2} and whose sides are in arithmetic progression. Suppose that the vertices of this triangle lie on a circle of radius 1.

Question: Then the inradius of the triangle ABCABC is

Tests: Find the inradius as area over semi-perimeter, using sides in AP to get the perimeter from the middle side.

Show solution
  1. As in Q14: sin⁡2A=34\sin 2A = \dfrac{3}{4}, cos⁡2A=74\cos 2A = \dfrac{\sqrt{7}}{4}, and area Δ=3716\Delta = \dfrac{3\sqrt{7}}{16}.
  2. The middle side is b=2Rsin⁡B=2cos⁡2A=72b = 2R\sin B = 2\cos 2A = \dfrac{\sqrt{7}}{2}. Sides in AP give a+b+c=3ba + b + c = 3b, so the semi-perimeter is s=3b2=374s = \dfrac{3b}{2} = \dfrac{3\sqrt{7}}{4}.
  3. Inradius r=Δs=37/1637/4=14=0.25r = \dfrac{\Delta}{s} = \dfrac{3\sqrt{7}/16}{3\sqrt{7}/4} = \dfrac{1}{4} = 0.25.
AnswerAnswer: 0.25
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Probability (random variables, expectation) · +3
Paragraph "II": Consider the 6×66 \times 6 square in the figure. Let A1,A2,…,A49A_1, A_2, \ldots, A_{49} be the points of intersections (dots in the picture) in some order. We say that AiA_i and AjA_j are friends if they are adjacent along a row or along a column. Assume that each point AiA_i has an equal chance of being chosen. (The figure shows a 6×66 \times 6 square divided into 36 unit cells by grid lines, with a dot at every intersection: 7 rows of 7 dots, 49 dots in all.)

Question: Let pip_i be the probability that a randomly chosen point has ii many friends, i=0,1,2,3,4i = 0, 1, 2, 3, 4. Let XX be a random variable such that for i=0,1,2,3,4i = 0, 1, 2, 3, 4, the probability P(X=i)=piP(X = i) = p_i. Then the value of 7E(X)7E(X) is

Tests: Classify grid points by number of neighbours and compute an expected value.

Show solution
  1. The 49 points form a 7×77 \times 7 grid. Corners (4 points) have 2 friends; other boundary points (4×5=204 \times 5 = 20) have 3; interior points (5×5=255 \times 5 = 25) have 4. No point has 0 or 1 friend.
  2. p2=449p_2 = \dfrac{4}{49}, p3=2049p_3 = \dfrac{20}{49}, p4=2549p_4 = \dfrac{25}{49}.
  3. E(X)=2⋅4+3⋅20+4⋅2549=16849=247E(X) = \dfrac{2 \cdot 4 + 3 \cdot 20 + 4 \cdot 25}{49} = \dfrac{168}{49} = \dfrac{24}{7}, so 7E(X)=247E(X) = 24.
AnswerAnswer: 24
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Probability (counting pairs) · +3
Paragraph "II": Consider the 6×66 \times 6 square in the figure. Let A1,A2,…,A49A_1, A_2, \ldots, A_{49} be the points of intersections (dots in the picture) in some order. We say that AiA_i and AjA_j are friends if they are adjacent along a row or along a column. Assume that each point AiA_i has an equal chance of being chosen. (The figure shows a 6×66 \times 6 square divided into 36 unit cells by grid lines, with a dot at every intersection: 7 rows of 7 dots, 49 dots in all.)

Question: Two distinct points are chosen randomly out of the points A1,A2,…,A49A_1, A_2, \ldots, A_{49}. Let pp be the probability that they are friends. Then the value of 7p7p is

Tests: Count adjacent pairs on a grid and divide by the number of ways to choose two points.

Show solution
  1. Friend pairs are the unit segments of the grid: each of the 7 rows has 6 horizontal segments and each of the 7 columns has 6 vertical ones, 42+42=8442 + 42 = 84 pairs (also 1682\dfrac{168}{2} from Q16).
  2. Ways to choose two distinct points: 49C2=49×482=1176^{49}C_2 = \dfrac{49 \times 48}{2} = 1176.
  3. p=841176=114p = \dfrac{84}{1176} = \dfrac{1}{14}, so 7p=12=0.57p = \dfrac{1}{2} = 0.5.
AnswerAnswer: 0.5
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Electric dipole (potential) · +3 / −1
An electric dipole is formed by two charges +q+q and −q-q located in xyxy-plane at (0,2)(0, 2) mm and (0,−2)(0, -2) mm, respectively, as shown in the figure. The electric potential at point P (100,100)(100, 100) mm due to the dipole is V0V_0. The charges +q+q and −q-q are then moved to the points (−1,2)(-1, 2) mm and (1,−2)(1, -2) mm, respectively. What is the value of electric potential at P due to the new dipole? (The figure shows the two charges near the origin O on the yy-axis, the new positions (−1,2)(-1, 2) and (1,−2)(1, -2) beside them, and P far away along the line y=xy = x.)
  1. (A)V0/4V_0/4
  2. (B)V0/2V_0/2
  3. (C)V0/2V_0/\sqrt{2}
  4. (D)3V0/43V_0/4

Tests: Use the far-field dipole potential, which depends only on the component of the dipole moment towards the point.

Show solution
  1. P is about 141 mm away while the charges are only a few mm apart, so use the dipole formula V=k p⃗⋅r^r2V = \dfrac{k\,\vec{p}\cdot\hat{r}}{r^2}, with r^=i^+j^2\hat{r} = \dfrac{\hat{i} + \hat{j}}{\sqrt{2}} towards P.

    Why: r is the same in both cases, so only p·r̂ changes.

  2. First dipole: p⃗1=q[(0,2)−(0,−2)]=q(0,4)\vec{p}_1 = q[(0, 2) - (0, -2)] = q(0, 4) mm, so p⃗1⋅r^=4q2\vec{p}_1\cdot\hat{r} = \dfrac{4q}{\sqrt{2}}.
  3. New dipole: p⃗2=q[(−1,2)−(1,−2)]=q(−2,4)\vec{p}_2 = q[(-1, 2) - (1, -2)] = q(-2, 4) mm, so p⃗2⋅r^=(−2+4)q2=2q2\vec{p}_2\cdot\hat{r} = \dfrac{(-2 + 4)q}{\sqrt{2}} = \dfrac{2q}{\sqrt{2}}.
  4. VV0=p⃗2⋅r^p⃗1⋅r^=24=12\dfrac{V}{V_0} = \dfrac{\vec{p}_2\cdot\hat{r}}{\vec{p}_1\cdot\hat{r}} = \dfrac{2}{4} = \dfrac{1}{2}, so V=V0/2V = V_0/2.
AnswerAnswer: (B) V0/2V_0/2
Ask about this question
Q2

Physics, Question 2 (3 marks)

Dimensional analysis · +3 / −1
Young's modulus of elasticity YY is expressed in terms of three derived quantities, namely, the gravitational constant GG, Planck's constant hh and the speed of light cc, as Y=cαhβGγY = c^\alpha h^\beta G^\gamma. Which of the following is the correct option?
  1. (A)α=7, β=−1, γ=−2\alpha = 7,\ \beta = -1,\ \gamma = -2
  2. (B)α=−7, β=−1, γ=−2\alpha = -7,\ \beta = -1,\ \gamma = -2
  3. (C)α=7, β=−1, γ=2\alpha = 7,\ \beta = -1,\ \gamma = 2
  4. (D)α=−7, β=1, γ=−2\alpha = -7,\ \beta = 1,\ \gamma = -2

Tests: Find the exponents of c, h and G that build a quantity with the dimensions of Young's modulus.

Show solution
  1. Dimensions: [Y]=ML−1T−2[Y] = \mathrm{M L^{-1} T^{-2}}, [c]=LT−1[c] = \mathrm{L T^{-1}}, [h]=ML2T−1[h] = \mathrm{M L^2 T^{-1}}, [G]=M−1L3T−2[G] = \mathrm{M^{-1} L^3 T^{-2}}.
  2. Match powers. M: β−γ=1\beta - \gamma = 1. L: α+2β+3γ=−1\alpha + 2\beta + 3\gamma = -1. T: −α−β−2γ=−2-\alpha - \beta - 2\gamma = -2.
  3. Add the L and T equations: β+γ=−3\beta + \gamma = -3. With β−γ=1\beta - \gamma = 1: β=−1\beta = -1, γ=−2\gamma = -2. Then α=−1−2β−3γ=−1+2+6=7\alpha = -1 - 2\beta - 3\gamma = -1 + 2 + 6 = 7.
  4. Check: c7h−1G−2c^7h^{-1}G^{-2} has M: −1+2=1-1 + 2 = 1, L: 7−2−6=−17 - 2 - 6 = -1, T: −7+1+4=−2-7 + 1 + 4 = -2. It matches [Y][Y].
AnswerAnswer: (A) α=7, β=−1, γ=−2\alpha = 7,\ \beta = -1,\ \gamma = -2
Ask about this question
Q3

Physics, Question 3 (3 marks)

Kinematics (velocity field, acceleration) · +3 / −1
A particle of mass mm is moving in the xyxy-plane such that its velocity at a point (x,y)(x, y) is given as v⃗=α(yx^+2xy^)\vec{v} = \alpha(y\hat{x} + 2x\hat{y}), where α\alpha is a non-zero constant. What is the force F⃗\vec{F} acting on the particle?
  1. (A)F⃗=2mα2(xx^+yy^)\vec{F} = 2m\alpha^2(x\hat{x} + y\hat{y})
  2. (B)F⃗=mα2(yx^+2xy^)\vec{F} = m\alpha^2(y\hat{x} + 2x\hat{y})
  3. (C)F⃗=2mα2(yx^+xy^)\vec{F} = 2m\alpha^2(y\hat{x} + x\hat{y})
  4. (D)F⃗=mα2(xx^+2yy^)\vec{F} = m\alpha^2(x\hat{x} + 2y\hat{y})

Tests: Get acceleration from a velocity given as a function of position using the chain rule.

Show solution
  1. The velocity depends on position, so differentiate along the motion: ax=dvxdt=αdydt=αvya_x = \dfrac{dv_x}{dt} = \alpha\dfrac{dy}{dt} = \alpha v_y, ay=dvydt=2αdxdt=2αvxa_y = \dfrac{dv_y}{dt} = 2\alpha\dfrac{dx}{dt} = 2\alpha v_x.

    Why: x and y themselves change with time as the particle moves.

  2. Substitute vx=αyv_x = \alpha y, vy=2αxv_y = 2\alpha x: ax=α(2αx)=2α2xa_x = \alpha(2\alpha x) = 2\alpha^2 x, ay=2α(αy)=2α2ya_y = 2\alpha(\alpha y) = 2\alpha^2 y.
  3. F⃗=ma⃗=2mα2(xx^+yy^)\vec{F} = m\vec{a} = 2m\alpha^2(x\hat{x} + y\hat{y}).
AnswerAnswer: (A) F⃗=2mα2(xx^+yy^)\vec{F} = 2m\alpha^2(x\hat{x} + y\hat{y})
Ask about this question
Q4

Physics, Question 4 (3 marks)

Kinetic theory (degrees of freedom, speed of sound) · +3 / −1
An ideal gas is in thermodynamic equilibrium. The number of degrees of freedom of a molecule of the gas is nn. The internal energy of one mole of the gas is UnU_n and the speed of sound in the gas is vn\mathrm{v}_n. At a fixed temperature and pressure, which of the following is the correct option?
  1. (A)v3<v6\mathrm{v}_3 < \mathrm{v}_6 and U3>U6U_3 > U_6
  2. (B)v5>v3\mathrm{v}_5 > \mathrm{v}_3 and U3>U5U_3 > U_5
  3. (C)v5>v7\mathrm{v}_5 > \mathrm{v}_7 and U5<U7U_5 < U_7
  4. (D)v6<v7\mathrm{v}_6 < \mathrm{v}_7 and U6<U7U_6 < U_7

Tests: Relate degrees of freedom to internal energy and, through γ, to the speed of sound.

Show solution
  1. Internal energy of one mole: Un=n2RTU_n = \dfrac{n}{2}RT. At fixed TT it grows with nn: U3<U5<U6<U7U_3 < U_5 < U_6 < U_7.
  2. Speed of sound: vn=γRTM\mathrm{v}_n = \sqrt{\dfrac{\gamma RT}{M}} with γ=1+2n\gamma = 1 + \dfrac{2}{n}. At fixed TT (and the same molar mass, as the question intends), more degrees of freedom means a smaller γ\gamma, so v3>v5>v6>v7\mathrm{v}_3 > \mathrm{v}_5 > \mathrm{v}_6 > \mathrm{v}_7.
  3. (A) v3<v6\mathrm{v}_3 < \mathrm{v}_6 is false. (B) v5>v3\mathrm{v}_5 > \mathrm{v}_3 and U3>U5U_3 > U_5 are both false. (C) v5>v7\mathrm{v}_5 > \mathrm{v}_7 and U5<U7U_5 < U_7 are both true. (D) v6<v7\mathrm{v}_6 < \mathrm{v}_7 is false.
AnswerAnswer: (C) v5>v7\mathrm{v}_5 > \mathrm{v}_7 and U5<U7U_5 < U_7
Ask about this question

Physics, Section 2: 3 questions, one or more options correct: +4 if all the correct options (and nothing else) are chosen; +3 if all four are correct and only three are chosen; +2 if three or more are correct and only two are chosen, both correct; +1 if two or more are correct and only one is chosen, which is correct; 0 if unanswered; −2 in all other cases

Q5

Physics, Question 5 (4 marks)

Wave optics (graded-index slab) · +4 / −2
A monochromatic light wave is incident normally on a glass slab of thickness dd, as shown in the figure. The refractive index of the slab increases linearly from n1n_1 to n2n_2 over the height hh. Which of the following statement(s) is(are) true about the light wave emerging out of the slab? (The figure shows plane wavefronts travelling to the right onto a thin vertical slab of thickness dd; the refractive index is n1n_1 at the lower marked level and n2n_2 at the upper level, a height hh above it, with n2>n1n_2 > n_1.)
  1. (A)It will deflect up by an angle tan⁡−1[(n22−n12)d2h]\tan^{-1}\left[\dfrac{(n_2^2 - n_1^2)d}{2h}\right].
  2. (B)It will deflect up by an angle tan⁡−1[(n2−n1)dh]\tan^{-1}\left[\dfrac{(n_2 - n_1)d}{h}\right].
  3. (C)It will not deflect.
  4. (D)The deflection angle depends only on (n2−n1)(n_2 - n_1) and not on the individual values of n1n_1 and n2n_2.

Tests: Find the deflection of light through a slab whose refractive index varies across its height.

Show solution
  1. A plane wavefront enters the slab with all points in phase. Crossing the thin slab, the ray at height yy picks up an optical path n(y) dn(y)\,d.
  2. Between the levels n1n_1 and n2n_2 (a height hh apart), the top lags behind the bottom by an extra optical path (n2−n1)d(n_2 - n_1)d. So the emerging wavefront is tilted: the top part is behind.

    Why: The wave is slower where the index is higher.

  3. The tilt angle θ\theta of the wavefront (and so of the ray) satisfies tan⁡θ=(n2−n1)dh\tan\theta = \dfrac{(n_2 - n_1)d}{h}, and the ray, normal to the wavefront, turns towards the higher index, that is up. So (B) is true and (C) is false.
  4. (A) has n22−n12n_2^2 - n_1^2, which is not the path difference: false. (D): the angle involves only n2−n1n_2 - n_1 (with dd and hh): true.
AnswerAnswer: (B), (D)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Rotational dynamics (impulse and rolling) · +4 / −2
An annular disk of mass MM, inner radius aa and outer radius bb is placed on a horizontal surface with coefficient of friction μ\mu, as shown in the figure. At some time, an impulse J0x^\mathcal{J}_0\hat{x} is applied at a height hh above the center of the disk. If h=hmh = h_m then the disk rolls without slipping along the xx-axis. Which of the following statement(s) is(are) correct? (The figure shows the ring standing upright on the surface in the xzxz-plane; the horizontal impulse J0\mathcal{J}_0 along +x+x acts on the ring at a height hh above its centre.)
  1. (A)For μ≠0\mu \neq 0 and a→0a \rightarrow 0, hm=b/2h_m = b/2.
  2. (B)For μ≠0\mu \neq 0 and a→ba \rightarrow b, hm=bh_m = b.
  3. (C)For h=hmh = h_m, the initial angular velocity does not depend on the inner radius aa.
  4. (D)For μ=0\mu = 0 and h=0h = 0, the wheel always slides without rolling.

Tests: Find where to strike a ring-shaped disk so that it starts rolling without slipping at once.

Show solution
  1. Moment of inertia about the centre: I=M(a2+b2)2I = \dfrac{M(a^2 + b^2)}{2}. Friction gives no significant impulse during the blow (the normal force stays finite), so: v=J0Mv = \dfrac{\mathcal{J}_0}{M} and ω=J0hI\omega = \dfrac{\mathcal{J}_0 h}{I}.
  2. Rolling from the start needs v=ωbv = \omega b: J0M=J0hmbI\dfrac{\mathcal{J}_0}{M} = \dfrac{\mathcal{J}_0 h_m b}{I}, so hm=IMb=a2+b22bh_m = \dfrac{I}{Mb} = \dfrac{a^2 + b^2}{2b}.
  3. (A) a→0a \rightarrow 0 (solid disk): hm=b/2h_m = b/2. True. (B) a→ba \rightarrow b (thin ring): hm=2b22b=bh_m = \dfrac{2b^2}{2b} = b. True.
  4. (C) At h=hmh = h_m, ω=v/b=J0Mb\omega = v/b = \dfrac{\mathcal{J}_0}{Mb}, with no aa in it. True.
  5. (D) With h=0h = 0 the impulse passes through the centre, so ω=0\omega = 0; with μ=0\mu = 0 no friction can ever spin it up. It slides without rolling for ever. True.
AnswerAnswer: (A), (B), (C), (D)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Electromagnetic waves · +4 / −2
The electric field associated with an electromagnetic wave propagating in a dielectric medium is given by E⃗=30(2x^+y^)sin⁡[2π(5×1014t−1073z)] V m−1\vec{E} = 30(2\hat{x} + \hat{y})\sin\left[2\pi\left(5\times 10^{14}t - \dfrac{10^7}{3}z\right)\right]\ \mathrm{V\,m^{-1}}. Which of the following option(s) is(are) correct? [Given: The speed of light in vacuum, c=3×108 m s−1c = 3\times 10^8\ \mathrm{m\,s^{-1}}]
  1. (A)Bx=−2×10−7sin⁡[2π(5×1014t−1073z)] Wb m−2B_x = -2\times 10^{-7}\sin\left[2\pi\left(5\times 10^{14}t - \dfrac{10^7}{3}z\right)\right]\ \mathrm{Wb\,m^{-2}}.
  2. (B)By=2×10−7sin⁡[2π(5×1014t−1073z)] Wb m−2B_y = 2\times 10^{-7}\sin\left[2\pi\left(5\times 10^{14}t - \dfrac{10^7}{3}z\right)\right]\ \mathrm{Wb\,m^{-2}}.
  3. (C)The wave is polarized in the xyxy-plane with polarization angle 30∘30^\circ with respect to the xx-axis.
  4. (D)The refractive index of the medium is 2.

Tests: Get the magnetic field, polarization and refractive index from the electric field of an EM wave.

Show solution
  1. Wave speed v=f1/λ=5×1014107/3=1.5×108 m s−1v = \dfrac{f}{1/\lambda} = \dfrac{5\times 10^{14}}{10^7/3} = 1.5\times 10^8\ \mathrm{m\,s^{-1}}, so n=c/v=2n = c/v = 2. (D) is true.
  2. The wave moves along +z+z, so B⃗=1vk^×E⃗\vec{B} = \dfrac{1}{v}\hat{k}\times\vec{E}. With k^×x^=y^\hat{k}\times\hat{x} = \hat{y} and k^×y^=−x^\hat{k}\times\hat{y} = -\hat{x}: B⃗=30v(2y^−x^)sin⁡[…]\vec{B} = \dfrac{30}{v}(2\hat{y} - \hat{x})\sin[\ldots].
  3. 301.5×108=2×10−7\dfrac{30}{1.5\times 10^8} = 2\times 10^{-7}. So Bx=−2×10−7sin⁡[…]B_x = -2\times 10^{-7}\sin[\ldots] (A true) and By=+4×10−7sin⁡[…]B_y = +4\times 10^{-7}\sin[\ldots] (B false: wrong amplitude).
  4. E⃗\vec{E} points along 2x^+y^2\hat{x} + \hat{y}, at tan⁡−1(1/2)≈26.6∘\tan^{-1}(1/2) \approx 26.6^\circ to the xx-axis, not 30∘30^\circ. (C) is false.
AnswerAnswer: (A), (D)
Ask about this question

Physics, Section 3: 6 questions, non-negative integer answer: +4 if correct, 0 otherwise

Q8

Physics, Question 8 (4 marks)

Rotational dynamics (angular impulse) · +4
A thin circular coin of mass 5 gm and radius 4/34/3 cm is initially in a horizontal xyxy-plane. The coin is tossed vertically up (+z+z direction) by applying an impulse of π2×10−2\sqrt{\dfrac{\pi}{2}}\times 10^{-2} N-s at a distance 2/32/3 cm from its center. The coin spins about its diameter and moves along the +z+z direction. By the time the coin reaches back to its initial position, it completes nn rotations. The value of nn is ______. [Given: The acceleration due to gravity g=10 m s−2g = 10\ \mathrm{m\,s^{-2}}] (The figure shows the horizontal coin with the upward impulse applied at a point 2/32/3 cm from the centre.)

Tests: Use linear and angular impulse together to count the spins of a tossed coin.

Show solution
  1. Linear: v=Jm=π/2×10−25×10−3=2π/2 m s−1v = \dfrac{J}{m} = \dfrac{\sqrt{\pi/2}\times 10^{-2}}{5\times 10^{-3}} = 2\sqrt{\pi/2}\ \mathrm{m\,s^{-1}}. Time to come back: T=2vg=0.4π/2T = \dfrac{2v}{g} = 0.4\sqrt{\pi/2} s.
  2. Moment of inertia about a diameter: I=mR24=5×10−3×(4/3×10−2)24=29×10−6 kg m2I = \dfrac{mR^2}{4} = \dfrac{5\times 10^{-3}\times(4/3\times 10^{-2})^2}{4} = \dfrac{2}{9}\times 10^{-6}\ \mathrm{kg\,m^2}.
  3. Angular impulse: ω=JrI=π/2×10−2×23×10−229×10−6=300π/2 rad s−1\omega = \dfrac{Jr}{I} = \dfrac{\sqrt{\pi/2}\times 10^{-2}\times\frac{2}{3}\times 10^{-2}}{\frac{2}{9}\times 10^{-6}} = 300\sqrt{\pi/2}\ \mathrm{rad\,s^{-1}}.
  4. Angle turned: θ=ωT=300×0.4×π2=60π\theta = \omega T = 300\times 0.4\times\dfrac{\pi}{2} = 60\pi rad, so n=60π2π=30n = \dfrac{60\pi}{2\pi} = 30.

    Why: Gravity acts at the centre, so ω stays constant in flight.

AnswerAnswer: 30
Ask about this question
Q9

Physics, Question 9 (4 marks)

Electromagnetic induction (moving loop near a wire) · +4
A rectangular conducting loop of length 4 cm and width 2 cm is in the xyxy-plane, as shown in the figure. It is being moved away from a thin and long conducting wire along the direction 32x^+12y^\dfrac{\sqrt{3}}{2}\hat{x} + \dfrac{1}{2}\hat{y} with a constant speed v. The wire is carrying a steady current I=10I = 10 A in the positive xx-direction. A current of 10 μ10\ \muA flows through the loop when it is at a distance d=4d = 4 cm from the wire. If the resistance of the loop is 0.1 Ω0.1\ \Omega, then the value of v is ______ m s−1\mathrm{m\,s^{-1}}. [Given: The permeability of free space μ0=4π×10−7 N A−2\mu_0 = 4\pi\times 10^{-7}\ \mathrm{N\,A^{-2}}] (The figure shows the wire along the xx-axis and, above it, the loop with its 2 cm sides parallel to the wire and its 4 cm sides along yy; its near side is a distance dd from the wire.)

Tests: Find the induced current in a loop moving away from a current-carrying wire.

Show solution
  1. The wire's field depends only on the distance yy from it, so motion along xx changes no flux. Only vy=v2v_y = \dfrac{v}{2} matters.
  2. Flux through the loop (width w=2w = 2 cm, sides at dd and d+Ld + L, L=4L = 4 cm): Φ=μ0Iw2πln⁡d+Ld\Phi = \dfrac{\mu_0 I w}{2\pi}\ln\dfrac{d + L}{d}.
  3. EMF: ε=∣dΦdt∣=μ0Iw2π(1d−1d+L)vy=2×10−6×0.02×(25−12.5)×v2=2.5×10−7 v\varepsilon = \left|\dfrac{d\Phi}{dt}\right| = \dfrac{\mu_0 I w}{2\pi}\left(\dfrac{1}{d} - \dfrac{1}{d + L}\right)v_y = 2\times 10^{-6}\times 0.02\times(25 - 12.5)\times\dfrac{v}{2} = 2.5\times 10^{-7}\,v V.
  4. Current εR=2.5×10−6 v=10×10−6\dfrac{\varepsilon}{R} = 2.5\times 10^{-6}\,v = 10\times 10^{-6}, so v=4 m s−1v = 4\ \mathrm{m\,s^{-1}}.
AnswerAnswer: 4
Ask about this question
Q10

Physics, Question 10 (4 marks)

Waves on a string (harmonics) · +4
A string of length 1 m and mass 2×10−52\times 10^{-5} kg is under tension TT. When the string vibrates, two successive harmonics are found to occur at frequencies 750 Hz and 1000 Hz. The value of tension TT is ______ Newton.

Tests: Get the fundamental frequency from two successive harmonics and then the tension.

Show solution
  1. For a string fixed at both ends the harmonics are nf1nf_1, so two successive ones differ by f1f_1: f1=1000−750=250f_1 = 1000 - 750 = 250 Hz.
  2. f1=v2Lf_1 = \dfrac{v}{2L} gives v=2×1×250=500 m s−1v = 2\times 1\times 250 = 500\ \mathrm{m\,s^{-1}}.
  3. μ=2×10−51=2×10−5 kg m−1\mu = \dfrac{2\times 10^{-5}}{1} = 2\times 10^{-5}\ \mathrm{kg\,m^{-1}}, and T=μv2=2×10−5×2.5×105=5T = \mu v^2 = 2\times 10^{-5}\times 2.5\times 10^5 = 5 N.
AnswerAnswer: 5
Ask about this question
Q11

Physics, Question 11 (4 marks)

Surface tension (capillary rise) and gas laws · +4
An incompressible liquid is kept in a container having a weightless piston with a hole. A capillary tube of inner radius 0.1 mm is dipped vertically into the liquid through the airtight piston hole, as shown in the figure. The air in the container is isothermally compressed from its original volume V0V_0 to 100101V0\dfrac{100}{101}V_0 with the movable piston. Considering air as an ideal gas, the height (hh) of the liquid column in the capillary above the liquid level in cm is ______. [Given: Surface tension of the liquid is 0.075 N m−10.075\ \mathrm{N\,m^{-1}}, atmospheric pressure is 105 N m−210^5\ \mathrm{N\,m^{-2}}, acceleration due to gravity (gg) is 10 m s−210\ \mathrm{m\,s^{-2}}, density of the liquid is 103 kg m−310^3\ \mathrm{kg\,m^{-3}} and contact angle of capillary surface with the liquid is zero] (The figure shows the liquid at the bottom of the container, a layer of trapped air above it under the piston, and the capillary passing through the piston with its top open to the outside air; hh is the height of the column above the liquid level.)

Tests: Combine capillary rise with the extra pressure of compressed air on the liquid surface.

Show solution
  1. The trapped air starts at atmospheric pressure. Isothermal: P=P0V0V=1.01×105P = P_0\dfrac{V_0}{V} = 1.01\times 10^5 Pa, so it is 10001000 Pa above atmosphere.
  2. The capillary's top is open to the atmosphere. Just under the meniscus the pressure is P0−2Sr=P0−2×0.07510−4=P0−1500P_0 - \dfrac{2S}{r} = P_0 - \dfrac{2\times 0.075}{10^{-4}} = P_0 - 1500 Pa.
  3. At the liquid level outside the tube the pressure is PP, so P0−1500+ρgh=P0+1000P_0 - 1500 + \rho g h = P_0 + 1000, giving ρgh=2500\rho g h = 2500 Pa.
  4. h=2500103×10=0.25h = \dfrac{2500}{10^3\times 10} = 0.25 m =25= 25 cm (15 cm from surface tension plus 10 cm from the extra air pressure).
AnswerAnswer: 25
Ask about this question
Q12

Physics, Question 12 (4 marks)

Radioactivity (activity and half-life) · +4
In a radioactive decay process, the activity is defined as A=−dNdtA = -\dfrac{dN}{dt}, where N(t)N(t) is the number of radioactive nuclei at time tt. Two radioactive sources, S1S_1 and S2S_2 have same activity at time t=0t = 0. At a later time, the activities of S1S_1 and S2S_2 are A1A_1 and A2A_2, respectively. When S1S_1 and S2S_2 have just completed their 3rd and 7th half-lives, respectively, the ratio A1/A2A_1/A_2 is ______.

Tests: Compare activities of two sources after different numbers of half-lives.

Show solution
  1. Activity decays like NN: A=A0(12)t/T1/2A = A_0\left(\dfrac{1}{2}\right)^{t/T_{1/2}}, halving every half-life.
  2. After 3 half-lives: A1=A0/23=A0/8A_1 = A_0/2^3 = A_0/8. After 7 half-lives: A2=A0/27=A0/128A_2 = A_0/2^7 = A_0/128.
  3. A1A2=1288=16\dfrac{A_1}{A_2} = \dfrac{128}{8} = 16.

    Why: Both start from the same A₀, so only the number of halvings matters.

AnswerAnswer: 16
Ask about this question
Q13

Physics, Question 13 (4 marks)

Thermodynamics (work in cyclic processes) · +4
One mole of an ideal gas undergoes two different cyclic processes I and II, as shown in the PP-VV diagrams below. In cycle I, processes a,b,ca, b, c and dd are isobaric, isothermal, isobaric and isochoric, respectively. In cycle II, processes a′,b′,c′a', b', c' and d′d' are isothermal, isochoric, isobaric and isochoric, respectively. The total work done during cycle I is WIW_I and that during cycle II is WIIW_{II}. The ratio WI/WIIW_I/W_{II} is ______. (Cycle I: aa goes at 4P04P_0 from V0V_0 to 2V02V_0; bb is the isotherm from (2V0,4P0)(2V_0, 4P_0) down to (4V0,2P0)(4V_0, 2P_0); cc goes back at 2P02P_0 from 4V04V_0 to V0V_0; dd rises at V0V_0 from 2P02P_0 to 4P04P_0. Cycle II: a′a' is the isotherm from (V0,4P0)(V_0, 4P_0) to (2V0,2P0)(2V_0, 2P_0); b′b' drops at 2V02V_0 to P0P_0; c′c' goes back at P0P_0 to V0V_0; d′d' rises at V0V_0 to 4P04P_0. Both run clockwise.)

Tests: Add up the work in each step of two cycles that include isothermal parts.

Show solution
  1. Cycle I. aa: W=4P0(2V0−V0)=4P0V0W = 4P_0(2V_0 - V_0) = 4P_0V_0. bb: isothermal at PV=8P0V0PV = 8P_0V_0, W=8P0V0ln⁡4V02V0=8P0V0ln⁡2W = 8P_0V_0\ln\dfrac{4V_0}{2V_0} = 8P_0V_0\ln 2. cc: W=2P0(V0−4V0)=−6P0V0W = 2P_0(V_0 - 4V_0) = -6P_0V_0. dd: W=0W = 0.
  2. WI=(8ln⁡2−2)P0V0W_I = (8\ln 2 - 2)P_0V_0.
  3. Cycle II. a′a': isothermal at PV=4P0V0PV = 4P_0V_0, W=4P0V0ln⁡2W = 4P_0V_0\ln 2. b′b', d′d': W=0W = 0. c′c': W=P0(V0−2V0)=−P0V0W = P_0(V_0 - 2V_0) = -P_0V_0. So WII=(4ln⁡2−1)P0V0W_{II} = (4\ln 2 - 1)P_0V_0.
  4. WIWII=2(4ln⁡2−1)4ln⁡2−1=2\dfrac{W_I}{W_{II}} = \dfrac{2(4\ln 2 - 1)}{4\ln 2 - 1} = 2.
AnswerAnswer: 2
Ask about this question

Physics, Section 4: 2 paragraphs, 2 questions each, numerical value answer (truncate or round off to two decimal places): +3 if correct, 0 otherwise

Q14

Physics, Question 14 (3 marks)

Doppler effect (source on a circle) · +3
Paragraph I: S1S_1 and S2S_2 are two identical sound sources of frequency 656 Hz. The source S1S_1 is located at OO and S2S_2 moves anti-clockwise with a uniform speed 42 m s−14\sqrt{2}\ \mathrm{m\,s^{-1}} on a circular path around OO, as shown in the figure. There are three points PP, QQ and RR on this path such that PP and RR are diametrically opposite while QQ is equidistant from them. A sound detector is placed at point PP. The source S1S_1 can move along direction OPOP. [Given: The speed of sound in air is 324 m s−1324\ \mathrm{m\,s^{-1}}] (The figure shows the circle centred at OO, where S1S_1 sits, with RR at the top, PP at the bottom and QQ at the right end of the horizontal diameter; S2S_2 is drawn on the arc between PP and QQ, and an arrow on the arc between QQ and RR shows the anti-clockwise motion.) Question: When only S2S_2 is emitting sound and it is at QQ, the frequency of sound measured by the detector in Hz is ______.

Tests: Apply the Doppler effect when the source moves at an angle to the line of sight.

Show solution
  1. Take OO as origin, radius rr: P=(0,−r)P = (0, -r), Q=(r,0)Q = (r, 0). Moving anti-clockwise, S2S_2 at QQ moves straight up: velocity (0,42)(0, 4\sqrt{2}).
  2. Line from QQ to the detector: unit vector (−1,−1)2\dfrac{(-1, -1)}{\sqrt{2}}. Velocity component along it: −422=−4 m s−1\dfrac{-4\sqrt{2}}{\sqrt{2}} = -4\ \mathrm{m\,s^{-1}}, so S2S_2 moves away from PP at 4 m s−14\ \mathrm{m\,s^{-1}}.

    Why: Only the component along the line joining source and detector causes a Doppler shift.

  3. f=f0vv+vs=656×324328=648f = f_0\dfrac{v}{v + v_s} = 656\times\dfrac{324}{328} = 648 Hz.
AnswerAnswer: 648
Ask about this question
Q15

Physics, Question 15 (3 marks)

Doppler effect and beats · +3
Paragraph I: S1S_1 and S2S_2 are two identical sound sources of frequency 656 Hz. The source S1S_1 is located at OO and S2S_2 moves anti-clockwise with a uniform speed 42 m s−14\sqrt{2}\ \mathrm{m\,s^{-1}} on a circular path around OO, as shown in the figure. There are three points PP, QQ and RR on this path such that PP and RR are diametrically opposite while QQ is equidistant from them. A sound detector is placed at point PP. The source S1S_1 can move along direction OPOP. [Given: The speed of sound in air is 324 m s−1324\ \mathrm{m\,s^{-1}}] (The figure shows the circle centred at OO, where S1S_1 sits, with RR at the top, PP at the bottom and QQ at the right end of the horizontal diameter; S2S_2 is drawn on the arc between PP and QQ, and an arrow on the arc between QQ and RR shows the anti-clockwise motion.) Question: Consider both sources emitting sound. When S2S_2 is at RR and S1S_1 approaches the detector with a speed 4mathrmm,s−14 mathrm{m,s^{-1}}, the beat frequency measured by the detector is ______ Hz.

Tests: Find the beat frequency from two sources, one moving towards the detector and one moving across the line of sight.

Show solution
  1. At RR (the top), S2S_2 moves horizontally, perpendicular to RPRP, so there is no Doppler shift: f2=656f_2 = 656 Hz.
  2. S1S_1 approaches the detector along OPOP at 4 m s−14\ \mathrm{m\,s^{-1}}: f1=656×324324−4=656×324320=664.2f_1 = 656\times\dfrac{324}{324 - 4} = 656\times\dfrac{324}{320} = 664.2 Hz.
  3. Beat frequency =f1−f2=664.2−656=8.2= f_1 - f_2 = 664.2 - 656 = 8.2 Hz.
AnswerAnswer: 8.20
Ask about this question
Q16

Physics, Question 16 (3 marks)

Fluid dynamics (Bernoulli, chimney draft) · +3
Paragraph II: A cylindrical furnace has height (HH) and diameter (DD) both 1 m. It is maintained at temperature 360 K. The air gets heated inside the furnace at constant pressure PaP_a and its temperature becomes T=360T = 360 K. The hot air with density ρ\rho rises up a vertical chimney of diameter d=0.1d = 0.1 m and height h=9h = 9 m above the furnace and exits the chimney (see the figure). As a result, atmospheric air of density ρa=1.2 kg m−3\rho_a = 1.2\ \mathrm{kg\,m^{-3}}, pressure PaP_a and temperature Ta=300T_a = 300 K enters the furnace. Assume air as an ideal gas, neglect the variations in ρ\rho and TT inside the chimney and the furnace. Also ignore the viscous effects. [Given: The acceleration due to gravity g=10 m s−2g = 10\ \mathrm{m\,s^{-2}} and π=3.14\pi = 3.14] (The figure shows the furnace, a cylinder of height HH and diameter DD resting on a support just above the ground and labelled ρ,Pa,T\rho, P_a, T inside; outside air labelled ρa,Pa,Ta\rho_a, P_a, T_a enters through its open bottom face. The thin chimney of diameter dd rises from the top of the furnace to a height hh above it and is open at the top.) Question: Considering the air flow to be streamline, the steady mass flow rate of air exiting the chimney is ______ gm s−1\mathrm{gm\,s^{-1}}.

Tests: Use buoyancy-driven pressure difference and Bernoulli's equation to find the flow rate up a chimney.

Show solution
  1. Hot air density at the same pressure: ρ=ρaTaT=1.2×300360=1.0 kg m−3\rho = \rho_a\dfrac{T_a}{T} = 1.2\times\dfrac{300}{360} = 1.0\ \mathrm{kg\,m^{-3}}.
  2. The paragraph gives the furnace air at constant pressure PaP_a, so at the chimney's base (the top of the furnace) the hot air is at PaP_a and, the furnace being 100 times wider than the chimney, almost at rest.

    Why: The furnace condition is data in the paragraph, so it is used as given.

  3. At the chimney exit the pressure is that of the still outside air there. Outside air is at PaP_a where it enters the furnace bottom, so at the exit, H+h=10H + h = 10 m higher: Pa−ρag(H+h)=Pa−120P_a - \rho_a g(H + h) = P_a - 120 Pa.
  4. Bernoulli for the hot air from the chimney's base up the chimney (h=9h = 9 m): Pa=(Pa−120)+ρgh+12ρv2P_a = (P_a - 120) + \rho g h + \dfrac{1}{2}\rho v^2, so 12ρv2=120−90=30\dfrac{1}{2}\rho v^2 = 120 - 90 = 30 Pa and v=60=7.746 m s−1v = \sqrt{60} = 7.746\ \mathrm{m\,s^{-1}}.
  5. Mass flow: m˙=ρ πd24 v=1.0×3.14×0.014×7.746=0.00785×7.746=0.060806 kg s−1=60.80 g s−1\dot{m} = \rho\,\dfrac{\pi d^2}{4}\,v = 1.0\times\dfrac{3.14\times 0.01}{4}\times 7.746 = 0.00785\times 7.746 = 0.060806\ \mathrm{kg\,s^{-1}} = 60.80\ \mathrm{g\,s^{-1}} (60.81 if rounded).
  6. Another reading puts PaP_a at the furnace's open bottom instead and counts the furnace's 1 m of hot air as well: 12ρv2=(ρa−ρ)g(H+h)=20\frac{1}{2}\rho v^2 = (\rho_a - \rho)g(H + h) = 20 Pa, v=40v = \sqrt{40}, giving 49.65 g s−149.65\ \mathrm{g\,s^{-1}} (49.61 if 40\sqrt{40} is rounded to 6.32 first). The page uses the paragraph's stated furnace pressure.
AnswerAnswer: 60.80 (60.81 if rounded)
Ask about this question
Q17

Physics, Question 17 (3 marks)

Fluid statics (chimney draft) · +3
Paragraph II: A cylindrical furnace has height (HH) and diameter (DD) both 1 m. It is maintained at temperature 360 K. The air gets heated inside the furnace at constant pressure PaP_a and its temperature becomes T=360T = 360 K. The hot air with density ρ\rho rises up a vertical chimney of diameter d=0.1d = 0.1 m and height h=9h = 9 m above the furnace and exits the chimney (see the figure). As a result, atmospheric air of density ρa=1.2 kg m−3\rho_a = 1.2\ \mathrm{kg\,m^{-3}}, pressure PaP_a and temperature Ta=300T_a = 300 K enters the furnace. Assume air as an ideal gas, neglect the variations in ρ\rho and TT inside the chimney and the furnace. Also ignore the viscous effects. [Given: The acceleration due to gravity g=10 m s−2g = 10\ \mathrm{m\,s^{-2}} and π=3.14\pi = 3.14] (The figure shows the furnace, a cylinder of height HH and diameter DD resting on a support just above the ground and labelled ρ,Pa,T\rho, P_a, T inside; outside air labelled ρa,Pa,Ta\rho_a, P_a, T_a enters through its open bottom face. The thin chimney of diameter dd rises from the top of the furnace to a height hh above it and is open at the top.) Question: When the chimney is closed using a cap at the top, a pressure difference ΔP\Delta P develops between the top and the bottom surfaces of the cap. If the changes in the temperature and density of the hot air, due to the stoppage of air flow, are negligible then the value of ΔP\Delta P is ______ N m−2\mathrm{N\,m^{-2}}.

Tests: Find the draft pressure difference between a column of hot air and the outside cold air.

Show solution
  1. With the cap on, the air in the chimney is at rest. Hot air density ρ=1.2×300360=1.0 kg m−3\rho = 1.2\times\dfrac{300}{360} = 1.0\ \mathrm{kg\,m^{-3}}.
  2. The paragraph gives the furnace air at pressure PaP_a, so the hot air at the chimney's base is at PaP_a.

    Why: The furnace condition is data in the paragraph, so it is used as given.

  3. Under the cap (h=9h = 9 m up the chimney, through hot air): Pin=Pa−ρgh=Pa−1.0×10×9=Pa−90P_{\text{in}} = P_a - \rho g h = P_a - 1.0\times 10\times 9 = P_a - 90 Pa.
  4. Above the cap: outside air is at PaP_a where it enters the furnace bottom, and the cap is H+h=10H + h = 10 m higher, so Pout=Pa−ρag(H+h)=Pa−1.2×10×10=Pa−120P_{\text{out}} = P_a - \rho_a g(H + h) = P_a - 1.2\times 10\times 10 = P_a - 120 Pa.
  5. ΔP=Pin−Pout=ρag(H+h)−ρgh=120−90=30 N m−2\Delta P = P_{\text{in}} - P_{\text{out}} = \rho_a g(H + h) - \rho g h = 120 - 90 = 30\ \mathrm{N\,m^{-2}}, pushing the cap up.
  6. Another reading puts PaP_a at the furnace's open bottom instead, so the hot column also includes the furnace's 1 m: ΔP=(ρa−ρ)g(H+h)=0.2×10×10=20 N m−2\Delta P = (\rho_a - \rho)g(H + h) = 0.2\times 10\times 10 = 20\ \mathrm{N\,m^{-2}}. The page uses the paragraph's stated furnace pressure.
AnswerAnswer: 30
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Chemical bonding (molecular orbital theory) · +3 / −1
The correct molecular orbital diagram for F2\mathrm{F_2} molecule in the ground state is (Each option is an energy-level diagram: the 2s and 2p levels of the two F atoms at the sides, the molecular orbitals 1σ1\sigma, 1σ∗1\sigma^*, 2σ2\sigma, 1π1\pi, 1π∗1\pi^*, 2σ∗2\sigma^* in the middle, filled with arrows. Below, each option lists the molecular orbitals from lowest to highest energy with the electrons drawn in each.)
  1. (A)1σ2<1σ∗2<1π4<2σ2<1π∗4<2σ∗01\sigma^2 < 1\sigma^{*2} < 1\pi^4 < 2\sigma^2 < 1\pi^{*4} < 2\sigma^{*0} (2σ2\sigma drawn above 1π1\pi)
  2. (B)1σ2<1σ∗2<1π4<2σ2<2σ∗2<1π∗21\sigma^2 < 1\sigma^{*2} < 1\pi^4 < 2\sigma^2 < 2\sigma^{*2} < 1\pi^{*2} (two unpaired electrons in 1π∗1\pi^*, which is drawn above 2σ∗2\sigma^*)
  3. (C)1σ2<1σ∗2<2σ2<1π4<1π∗4<2σ∗01\sigma^2 < 1\sigma^{*2} < 2\sigma^2 < 1\pi^4 < 1\pi^{*4} < 2\sigma^{*0} (2σ2\sigma drawn below 1π1\pi)
  4. (D)1σ2<1σ∗2<2σ2<1π4<1π∗2<2σ∗21\sigma^2 < 1\sigma^{*2} < 2\sigma^2 < 1\pi^4 < 1\pi^{*2} < 2\sigma^{*2} (one electron in each 1π∗1\pi^*, parallel, and a pair in 2σ∗2\sigma^*)

Tests: Pick the MO energy order and electron filling for F2.

Show solution
  1. F2\mathrm{F_2} has 2×7=142 \times 7 = 14 valence electrons to place in the molecular orbitals built from 2s and 2p.
  2. For O and F the 2s–2p energy gap is large, so there is no s–p mixing: the σ\sigma orbital from 2pz2p_z (2σ2\sigma) lies below the 1π1\pi pair. The order 1π1\pi below 2σ2\sigma belongs to B2\mathrm{B_2}, C2\mathrm{C_2}, N2\mathrm{N_2}.

    Why: s–p mixing pushes the 2pσ orbital up only when 2s and 2p are close in energy.

  3. Aufbau and Pauli filling: 1σ2 1σ∗2 2σ2 1π4 1π∗4 2σ∗01\sigma^2\,1\sigma^{*2}\,2\sigma^2\,1\pi^4\,1\pi^{*4}\,2\sigma^{*0}. Bond order =8−62=1= \dfrac{8 - 6}{2} = 1; all electrons paired (diamagnetic).
  4. (A) has the N2\mathrm{N_2}-type order (2σ2\sigma above 1π1\pi). (B) puts 2σ∗2\sigma^* below 1π∗1\pi^* and fills it before 1π∗1\pi^*. (D) leaves 1π∗1\pi^* half filled while filling the higher 2σ∗2\sigma^*, breaking Aufbau. Only (C) is right.
AnswerAnswer: (C)
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Surface chemistry (colloids) · +3 / −1
Consider the following statements related to colloids. (I) Lyophobic colloids are not formed by simple mixing of dispersed phase and dispersion medium. (II) For emulsions, both the dispersed phase and the dispersion medium are liquid. (III) Micelles are produced by dissolving a surfactant in any solvent at any temperature. (IV) Tyndall effect can be observed from a colloidal solution with dispersed phase having the same refractive index as that of the dispersion medium. The option with the correct set of statements is
  1. (A)(I) and (II)
  2. (B)(II) and (III)
  3. (C)(III) and (IV)
  4. (D)(II) and (IV)

Tests: Judge statements on lyophobic sols, emulsions, micelles and the Tyndall effect.

Show solution
  1. (I) True. Lyophobic sols (metals, sulphides) have little affinity for the medium; they are made by special methods (Bredig's arc, peptisation, chemical reactions), not by just mixing.
  2. (II) True. An emulsion is a liquid dispersed in a liquid (oil in water, water in oil).
  3. (III) False. Micelles form only above the critical micelle concentration (CMC) and above the Kraft temperature, and in a suitable solvent (e.g. soap in water).

    Why: Below the CMC or the Kraft temperature the surfactant stays as separate ions.

  4. (IV) False. The Tyndall effect needs a clear difference in refractive index between the dispersed phase and the medium; with equal refractive indices the particles do not scatter light visibly.
  5. Correct set: (I) and (II), option (A).
AnswerAnswer: (A) (I) and (II)
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Haloalkanes, Grignard reagents and amines · +3 / −1
In the following reactions, P, Q, R, and S are the major products. (The figure shows the same starting compound, 1-chloro-2-methylpropane (CH3)2CHCH2Cl\mathrm{(CH_3)_2CHCH_2Cl}, in four reactions: (1) (i) Mg, dry ether; (ii) H2O\mathrm{H_2O} →\rightarrow P. (2) (i) Mg, dry ether; (ii) CO2\mathrm{CO_2}, dry ether; (iii) H3O+\mathrm{H_3O^+}; (iv) NaOH →\rightarrow Q. (3) (i) Mg, dry ether; (ii) CH3CHO\mathrm{CH_3CHO}, then H2O\mathrm{H_2O}; (iii) CrO3\mathrm{CrO_3} →\rightarrow R. (4) (i) ethanolic NaCN; (ii) H2/Ni\mathrm{H_2/Ni}; (iii) CHCl3/KOH\mathrm{CHCl_3/KOH}, Δ\Delta; (iv) LiAlH4\mathrm{LiAlH_4}, then H2O\mathrm{H_2O} →\rightarrow S.) The correct statement about P, Q, R, and S is
  1. (A)P is a primary alcohol with four carbons.
  2. (B)Q undergoes Kolbe’s electrolysis to give an eight-carbon product.
  3. (C)R has six carbons and it undergoes Cannizzaro reaction.
  4. (D)S is a primary amine with six carbons.

Tests: Follow a Grignard, Kolbe, oxidation and carbylamine sequence from isobutyl chloride.

Show solution
  1. P: the Grignard reagent (CH3)2CHCH2MgCl\mathrm{(CH_3)_2CHCH_2MgCl} is protonated by water: P =(CH3)2CHCH3= \mathrm{(CH_3)_2CHCH_3} (isobutane), an alkane, not an alcohol. (A) is false.
  2. Q: carboxylation gives (CH3)2CHCH2COOH\mathrm{(CH_3)_2CHCH_2COOH} (3-methylbutanoic acid); NaOH turns it into Q =(CH3)2CHCH2COONa= \mathrm{(CH_3)_2CHCH_2COONa}. Kolbe electrolysis joins two (CH3)2CHCH2∙\mathrm{(CH_3)_2CHCH_2^{\bullet}} radicals: (CH3)2CHCH2CH2CH(CH3)2\mathrm{(CH_3)_2CHCH_2CH_2CH(CH_3)_2}, 2,5-dimethylhexane, C8H18\mathrm{C_8H_{18}}. (B) is true.

    Why: Kolbe: 2 RCOO⁻ → R–R + 2 CO2, so the product has twice the carbons of R.

  3. R: Grignard + CH3CHO\mathrm{CH_3CHO} gives (CH3)2CHCH2CH(OH)CH3\mathrm{(CH_3)_2CHCH_2CH(OH)CH_3} (4-methylpentan-2-ol); CrO3\mathrm{CrO_3} oxidises the secondary alcohol to R =(CH3)2CHCH2COCH3= \mathrm{(CH_3)_2CHCH_2COCH_3} (4-methylpentan-2-one). Six carbons, but a ketone with α\alpha-H cannot do the Cannizzaro reaction. (C) is false.
  4. S: (CH3)2CHCH2CN→H2/Ni(CH3)2CHCH2CH2NH2\mathrm{(CH_3)_2CHCH_2CN} \xrightarrow{\mathrm{H_2/Ni}} \mathrm{(CH_3)_2CHCH_2CH_2NH_2} (5 C) →CHCl3/KOH(CH3)2CHCH2CH2NC\xrightarrow{\mathrm{CHCl_3/KOH}} \mathrm{(CH_3)_2CHCH_2CH_2NC} (carbylamine) →LiAlH4(CH3)2CHCH2CH2NHCH3\xrightarrow{\mathrm{LiAlH_4}} \mathrm{(CH_3)_2CHCH_2CH_2NHCH_3}.

    Why: LiAlH4 reduces an isocyanide R–N≡C to the N-methyl secondary amine R–NH–CH3.

  5. S has six carbons but is a secondary amine. (D) is false. Only (B) is correct.
AnswerAnswer: (B)
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Biomolecules (carbohydrates) · +3 / −1
A disaccharide X cannot be oxidised by bromine water. The acid hydrolysis of X leads to a laevorotatory solution. The disaccharide X is (Each option is drawn as a Haworth structure; they are described in words.)
  1. (A)An α\alpha-D-glucopyranose ring whose C1 is joined through O to C2 of a β\beta-D-fructofuranose ring (C1–O–C2 link, no free anomeric OH)
  2. (B)A fructofuranose ring whose C2 is joined through O to C4 of a D-glucopyranose ring; the glucose C1 carries a free OH (drawn down)
  3. (C)A β\beta-D-galactopyranose ring whose C1 is joined through O to C4 of a D-glucopyranose ring; the glucose C1 carries a free OH (drawn up)
  4. (D)An α\alpha-D-glucopyranose ring whose C1 is joined through O to C1 of a second glucopyranose ring drawn as its mirror image (C1–O–C1 link, no free anomeric OH)

Tests: Identify sucrose from non-reducing behaviour and inversion on hydrolysis.

Show solution
  1. "Cannot be oxidised by bromine water" means no free hemiacetal (anomeric) OH: X is a non-reducing sugar, so both anomeric carbons are tied up in the glycosidic link.

    Why: Bromine water oxidises the free CHO of an open-chain aldose; a full acetal cannot open.

  2. (B) and (C) each have a free anomeric OH on the glucose ring, so they are reducing and are oxidised by bromine water. Both are out.
  3. (A) is sucrose: α\alpha-D-glucopyranosyl-(1→2)(1 \rightarrow 2)-β\beta-D-fructofuranoside. Non-reducing. Hydrolysis gives D-glucose (+52.5∘+52.5^\circ) and D-fructose (−92.4∘-92.4^\circ) in equal amounts: net laevorotatory (invert sugar).
  4. (D) is non-reducing too, but hydrolysis gives only glucose. As printed the second ring is the mirror image of the first (α\alpha-L-glucopyranose), so the product is equal D- and L-glucose, net rotation zero; read as trehalose it would give D-glucose, dextrorotatory. Neither is laevorotatory.
  5. Only (A) fits both tests.
AnswerAnswer: (A) sucrose
Ask about this question

Chemistry, Section 2: 3 questions, one or more options correct: +4 only if (all) the correct option(s) are chosen; +3 if all four are correct but only three are chosen; +2 if three or more are correct but only two are chosen, both correct; +1 if two or more are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q5

Chemistry, Question 5 (4 marks)

Coordination compounds (isomerism) · +4 / −2
The complex(es), which can exhibit the type of isomerism shown by [Pt(NH3)2Br2]\mathrm{[Pt(NH_3)_2Br_2]}, is(are) [en =H2NCH2CH2NH2= \mathrm{H_2NCH_2CH_2NH_2}]
  1. (A)[Pt(en)(SCN)2]\mathrm{[Pt(en)(SCN)_2]}
  2. (B)[Zn(NH3)2Cl2]\mathrm{[Zn(NH_3)_2Cl_2]}
  3. (C)[Pt(NH3)2Cl4]\mathrm{[Pt(NH_3)_2Cl_4]}
  4. (D)[Cr(en)2(H2O)(SO4)]+\mathrm{[Cr(en)_2(H_2O)(SO_4)]^+}

Tests: Spot which complexes show cis–trans isomerism like square planar MA2B2.

Show solution
  1. [Pt(NH3)2Br2]\mathrm{[Pt(NH_3)_2Br_2]} is square planar MA2B2\mathrm{MA_2B_2} and shows geometrical (cis–trans) isomerism. Check each option for cis–trans isomers.
  2. (A) [Pt(en)(SCN)2]\mathrm{[Pt(en)(SCN)_2]}: square planar M(AA)B2\mathrm{M(AA)B_2}. The en ring must span two cis positions, so the two SCN are always cis: no geometrical isomers. Not correct.

    Why: The SCN linkage isomerism it can show is a different type of isomerism.

  3. (B) [Zn(NH3)2Cl2]\mathrm{[Zn(NH_3)_2Cl_2]}: Zn2+\mathrm{Zn^{2+}} (d10d^{10}, sp3sp^3) is tetrahedral; all positions are adjacent, so no cis–trans. Not correct.
  4. (C) [Pt(NH3)2Cl4]\mathrm{[Pt(NH_3)_2Cl_4]}: octahedral MA2B4\mathrm{MA_2B_4}; the two NH3\mathrm{NH_3} can be cis (90∘90^\circ) or trans (180∘180^\circ). Correct.
  5. (D) [Cr(en)2(H2O)(SO4)]+\mathrm{[Cr(en)_2(H_2O)(SO_4)]^+}: octahedral M(AA)2BC\mathrm{M(AA)_2BC}; H2O\mathrm{H_2O} and SO42−\mathrm{SO_4^{2-}} can be cis or trans (the cis form is also optically active). Correct.
AnswerAnswer: (C), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

Solid state (cubic unit cells) · +4 / −2
Atoms of metals x, y, and z form face-centred cubic (fcc) unit cell of edge length LxL_x, body-centred cubic (bcc) unit cell of edge length LyL_y, and simple cubic unit cell of edge length LzL_z, respectively. If rz=32ryr_z = \dfrac{\sqrt{3}}{2} r_y; ry=83rxr_y = \dfrac{8}{\sqrt{3}} r_x; Mz=32MyM_z = \dfrac{3}{2} M_y and Mz=3MxM_z = 3M_x, then the correct statement(s) is(are) [Given: MxM_x, MyM_y, and MzM_z are molar masses of metals x, y, and z, respectively. rxr_x, ryr_y, and rzr_z are atomic radii of metals x, y, and z, respectively.]
  1. (A)Packing efficiency of unit cell of x > Packing efficiency of unit cell of y > Packing efficiency of unit cell of z
  2. (B)Ly>LzL_y > L_z
  3. (C)Lx>LyL_x > L_y
  4. (D)Density of x > Density of y

Tests: Compare edge lengths, packing efficiencies and densities of fcc, bcc and sc cells.

Show solution
  1. Express all radii in rxr_x: ry=83rxr_y = \dfrac{8}{\sqrt{3}} r_x, rz=32⋅83rx=4rxr_z = \dfrac{\sqrt{3}}{2} \cdot \dfrac{8}{\sqrt{3}} r_x = 4 r_x. Masses: Mz=3MxM_z = 3M_x, My=23Mz=2MxM_y = \dfrac{2}{3}M_z = 2M_x.
  2. Edges: fcc Lx=22 rx≈2.83 rxL_x = 2\sqrt{2}\,r_x \approx 2.83\,r_x; bcc Ly=4ry3=323rx≈10.67 rxL_y = \dfrac{4 r_y}{\sqrt{3}} = \dfrac{32}{3} r_x \approx 10.67\,r_x; simple cubic Lz=2rz=8 rxL_z = 2 r_z = 8\,r_x.

    Why: Atoms touch along the face diagonal (fcc), body diagonal (bcc) and edge (sc).

  3. (A) Packing efficiency depends only on the lattice: fcc 74% > bcc 68% > sc 52.4%. True.
  4. (B) Ly=10.67 rx>Lz=8 rxL_y = 10.67\,r_x > L_z = 8\,r_x. True. (C) Lx=2.83 rx<LyL_x = 2.83\,r_x < L_y. False.
  5. (D) ρ=ZMNAL3\rho = \dfrac{ZM}{N_A L^3}. ρx=4MxNALx3\rho_x = \dfrac{4M_x}{N_A L_x^3}, ρy=2×2MxNALy3=4MxNALy3\rho_y = \dfrac{2 \times 2M_x}{N_A L_y^3} = \dfrac{4M_x}{N_A L_y^3}. Same numerator, and Lx<LyL_x < L_y, so ρx>ρy\rho_x > \rho_y. True.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

Carboxylic acids and aromatic side-chain reactions · +4 / −2
In the following reactions, P, Q, R, and S are the major products. (The figure shows four reactions: (1) 1-tert-butyl-4-ethylbenzene, (i) KMnO4\mathrm{KMnO_4}, KOH, Δ\Delta; (ii) H3O+\mathrm{H_3O^+} →\rightarrow P. (2) Methyl 3-(chlorocarbonyl)benzoate (MeOOC\mathrm{MeOOC} and COCl\mathrm{COCl} meta on a benzene ring), (i) NaOH, H2O\mathrm{H_2O}; (ii) H3O+\mathrm{H_3O^+} →\rightarrow Q. (3) Methyl 3-(3-cyanophenyl)-3-oxopropanoate (ArCOCH2COOMe\mathrm{ArCOCH_2COOMe} with CN meta on the ring), (i) H3O+\mathrm{H_3O^+}, Δ\Delta; (ii) H2CrO4\mathrm{H_2CrO_4} →\rightarrow R. (4) 2-(4-Bromophenyl)-1,3-dioxolane (the cyclic ethylene acetal of 4-bromobenzaldehyde), (i) Mg, dry ether; (ii) CO2\mathrm{CO_2}, then H3O+\mathrm{H_3O^+}; (iii) ammoniacal AgNO3\mathrm{AgNO_3}, H3O+\mathrm{H_3O^+} →\rightarrow S.) The correct statement(s) about P, Q, R, and S is(are)
  1. (A)P and Q are monomers of polymers dacron and glyptal, respectively.
  2. (B)P, Q, and R are dicarboxylic acids.
  3. (C)Compounds Q and R are the same.
  4. (D)R does not undergo aldol condensation and S does not undergo Cannizzaro reaction.

Tests: Track side-chain oxidations and protecting groups to name four aromatic acids.

Show solution
  1. P: hot alkaline KMnO4\mathrm{KMnO_4} oxidises the ethyl group (it has benzylic H) to COOH; the tert-butyl group has no benzylic H and survives. P == 4-tert-butylbenzoic acid, a monocarboxylic acid.
  2. Q: NaOH hydrolyses both the acid chloride and the methyl ester; acidification gives Q == benzene-1,3-dicarboxylic acid (isophthalic acid).
  3. R: hot aqueous acid hydrolyses CN to COOH and the ester to COOH; the β\beta-keto acid loses CO2\mathrm{CO_2}, giving 3-acetylbenzoic acid. Chromic acid then oxidises the aryl methyl ketone side chain to COOH: R == isophthalic acid.

    Why: Strong oxidants cleave any carbon side chain attached to the ring down to Ar–COOH.

  4. S: Grignard on the protected aldehyde, then CO2\mathrm{CO_2} and acid: the COOH is added and the acetal is hydrolysed, giving 4-formylbenzoic acid. Tollens' reagent oxidises CHO to COOH: S == terephthalic acid.

    Why: The dioxolane protects the CHO from the Grignard reagent; aqueous acid removes it.

  5. (A) False: dacron needs terephthalic acid (that is S, not P) and glyptal needs phthalic acid/anhydride (ortho), not isophthalic acid. (B) False: P has one COOH. (C) True: Q and R are both isophthalic acid.
  6. (D) True: R (isophthalic acid) has no α\alpha-H carbonyl for aldol condensation, and S (terephthalic acid) has no CHO group for the Cannizzaro reaction.
AnswerAnswer: (C), (D)
Ask about this question

Chemistry, Section 3: 6 questions, answer is a non-negative integer: +4 if only the correct integer is entered, 0 in all other cases

Q8

Chemistry, Question 8 (4 marks)

Redox reactions (balancing) · +4
H2S\mathrm{H_2S} (5 moles) reacts completely with acidified aqueous potassium permanganate solution. In this reaction, the number of moles of water produced is x, and the number of moles of electrons involved is y. The value of (x + y) is ____.

Tests: Balance the H2S–permanganate reaction and count water and electrons.

Show solution
  1. Half reactions: H2S→S+2H++2e−\mathrm{H_2S \rightarrow S + 2H^+ + 2e^-} (S: −2→0-2 \rightarrow 0) and MnO4−+8H++5e−→Mn2++4H2O\mathrm{MnO_4^- + 8H^+ + 5e^- \rightarrow Mn^{2+} + 4H_2O}.
  2. Equalise electrons (10): 5H2S+2MnO4−+6H+→5S+2Mn2++8H2O\mathrm{5H_2S + 2MnO_4^- + 6H^+ \rightarrow 5S + 2Mn^{2+} + 8H_2O}.

    Why: 5 × 2e⁻ lost by H2S = 2 × 5e⁻ gained by MnO4⁻.

  3. For 5 mol H2S\mathrm{H_2S}: water x=8x = 8 mol; electrons transferred y=10y = 10 mol.
  4. x+y=8+10=18x + y = 8 + 10 = 18.
AnswerAnswer: 18
Ask about this question
Q9

Chemistry, Question 9 (4 marks)

Chemical bonding (hybridisation, VSEPR) · +4
Among [I3]+\mathrm{[I_3]^+}, [SiO4]4−\mathrm{[SiO_4]^{4-}}, SO2Cl2\mathrm{SO_2Cl_2}, XeF2\mathrm{XeF_2}, SF4\mathrm{SF_4}, ClF3\mathrm{ClF_3}, Ni(CO)4\mathrm{Ni(CO)_4}, XeO2F2\mathrm{XeO_2F_2}, [PtCl4]2−\mathrm{[PtCl_4]^{2-}}, XeF4\mathrm{XeF_4}, and SOCl2\mathrm{SOCl_2}, the total number of species having sp3sp^3 hybridised central atom is ______.

Tests: Count species whose central atom is sp3 hybridised.

Show solution
  1. Count steric number (bonded atoms + lone pairs) on the central atom; 4 means sp3sp^3.
  2. sp3sp^3: [I3]+\mathrm{[I_3]^+} (central I+\mathrm{I^+}: 2 bonds + 2 lone pairs, bent); [SiO4]4−\mathrm{[SiO_4]^{4-}} (4 bonds); SO2Cl2\mathrm{SO_2Cl_2} (4 bonds); SOCl2\mathrm{SOCl_2} (3 bonds + 1 lone pair); Ni(CO)4\mathrm{Ni(CO)_4} (Ni(0), tetrahedral, sp3sp^3).

    Why: Ni(0) is d10 with CO; the four 4s/4p orbitals take the ligand pairs.

  3. Not sp3sp^3: XeF2\mathrm{XeF_2} (2 + 3 lp), SF4\mathrm{SF_4} (4 + 1), ClF3\mathrm{ClF_3} (3 + 2), XeO2F2\mathrm{XeO_2F_2} (4 + 1): all sp3dsp^3d. XeF4\mathrm{XeF_4} (4 + 2): sp3d2sp^3d^2. [PtCl4]2−\mathrm{[PtCl_4]^{2-}}: square planar dsp2dsp^2.
  4. Total =5= 5.
AnswerAnswer: 5
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Redox reactions (oxidation states) · +4
Consider the following molecules: Br3O8\mathrm{Br_3O_8}, F2O\mathrm{F_2O}, H2S4O6\mathrm{H_2S_4O_6}, H2S5O6\mathrm{H_2S_5O_6}, and C3O2\mathrm{C_3O_2}. Count the number of atoms existing in their zero oxidation state in each molecule. Their sum is____.

Tests: Find atoms in zero oxidation state from the structures of polyatomic molecules.

Show solution
  1. Br3O8\mathrm{Br_3O_8}: O3Br−BrO2−BrO3\mathrm{O_3Br{-}BrO_2{-}BrO_3}. Each end Br (3 O + 1 Br) is +6+6, the middle Br (2 O + 2 Br) is +4+4; average 16/316/3. No atom at 0.
  2. F2O\mathrm{F_2O}: F is −1-1, O is +2+2. None at 0.
  3. H2S4O6\mathrm{H_2S_4O_6} (tetrathionic acid): HO3S−S−S−SO3H\mathrm{HO_3S{-}S{-}S{-}SO_3H}; the two middle S are bonded only to S: oxidation state 0, the end S are +5+5. Count 2.
  4. H2S5O6\mathrm{H_2S_5O_6} (pentathionic acid): HO3S−S−S−S−SO3H\mathrm{HO_3S{-}S{-}S{-}S{-}SO_3H}; three middle S at 0. Count 3.
  5. C3O2\mathrm{C_3O_2}: O=C=C=C=O\mathrm{O{=}C{=}C{=}C{=}O}; the central C is bonded only to C: 0 (end C are +2+2). Count 1.

    Why: A bond between like atoms adds nothing to either's oxidation state.

  6. Sum =0+0+2+3+1=6= 0 + 0 + 2 + 3 + 1 = 6.
AnswerAnswer: 6
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Atomic structure (Bohr model) · +4
For He+\mathrm{He^+}, a transition takes place from the orbit of radius 105.8 pm to the orbit of radius 26.45 pm. The wavelength (in nm) of the emitted photon during the transition is ___. [Use: Bohr radius, a = 52.9 pm; Rydberg constant, RH=2.2×10−18R_\mathrm{H} = 2.2 \times 10^{-18} J; Planck’s constant, h=6.6×10−34h = 6.6 \times 10^{-34} J s; Speed of light, c=3×108 m s−1c = 3 \times 10^8\ \mathrm{m\,s^{-1}}]

Tests: Find n from Bohr radii and the wavelength of the emitted photon for He+.

Show solution
  1. Bohr radius of orbit nn for Z=2Z = 2: rn=52.9 n22=26.45 n2r_n = \dfrac{52.9\,n^2}{2} = 26.45\,n^2 pm. So 105.8 pm is n=2n = 2 and 26.45 pm is n=1n = 1.
  2. ΔE=RHZ2(112−122)=2.2×10−18×4×34=6.6×10−18\Delta E = R_\mathrm{H} Z^2 \left(\dfrac{1}{1^2} - \dfrac{1}{2^2}\right) = 2.2 \times 10^{-18} \times 4 \times \dfrac{3}{4} = 6.6 \times 10^{-18} J.
  3. λ=hcΔE=6.6×10−34×3×1086.6×10−18=3×10−8\lambda = \dfrac{hc}{\Delta E} = \dfrac{6.6 \times 10^{-34} \times 3 \times 10^8}{6.6 \times 10^{-18}} = 3 \times 10^{-8} m =30= 30 nm.
AnswerAnswer: 30 nm
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Solutions (osmotic pressure) · +4
50 mL of 0.2 molal urea solution (density =1.012 g mL−1= 1.012\ \mathrm{g\,mL^{-1}} at 300 K) is mixed with 250 mL of a solution containing 0.06 g of urea. Both the solutions were prepared in the same solvent. The osmotic pressure (in Torr) of the resulting solution at 300 K is ___. [Use: Molar mass of urea =60 g mol−1= 60\ \mathrm{g\,mol^{-1}}; gas constant, R=62 L Torr K−1 mol−1R = 62\ \mathrm{L\,Torr\,K^{-1}\,mol^{-1}}; Assume, ΔmixH=0\Delta_\mathrm{mix}H = 0, ΔmixV=0\Delta_\mathrm{mix}V = 0]

Tests: Convert molality to moles via density, mix two solutions and find osmotic pressure.

Show solution
  1. 0.2 molal: 0.2 mol urea (12 g) in 1000 g solvent, solution mass 1012 g, volume =10121.012=1000= \dfrac{1012}{1.012} = 1000 mL. So the solution is 0.2 mol per litre.

    Why: The density is chosen so that molality and molarity coincide here.

  2. Urea in 50 mL: 0.2×0.050=0.0100.2 \times 0.050 = 0.010 mol. Urea in the second solution: 0.0660=0.001\dfrac{0.06}{60} = 0.001 mol.
  3. Total: 0.011 mol in 50+250=30050 + 250 = 300 mL (no volume change on mixing). C=0.0110.300 mol L−1C = \dfrac{0.011}{0.300}\ \mathrm{mol\,L^{-1}}.
  4. π=CRT=0.0110.3×62×300=0.011×62 000=682\pi = CRT = \dfrac{0.011}{0.3} \times 62 \times 300 = 0.011 \times 62\,000 = 682 Torr.
AnswerAnswer: 682 Torr
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Hydrocarbons and amines (peroxide effect, stoichiometry) · +4
The reaction of 4-methyloct-1-ene (P, 2.52 g) with HBr in the presence of (C6H5CO)2O2\mathrm{(C_6H_5CO)_2O_2} gives two isomeric bromides in a 9 : 1 ratio, with a combined yield of 50%. Of these, the entire amount of the primary alkyl bromide was reacted with an appropriate amount of diethylamine followed by treatment with aq. K2CO3\mathrm{K_2CO_3} to give a non-ionic product S in 100% yield. The mass (in mg) of S obtained is ___. [Use molar mass (in g mol−1\mathrm{g\,mol^{-1}}): H = 1, C = 12, N = 14, Br = 80]

Tests: Use the peroxide effect, yield and ratio to find the mass of a tertiary amine.

Show solution
  1. P =CH2=CHCH2CH(CH3)CH2CH2CH2CH3= \mathrm{CH_2{=}CHCH_2CH(CH_3)CH_2CH_2CH_2CH_3}, C9H18\mathrm{C_9H_{18}}, M=126M = 126. Moles =2.52126=0.02= \dfrac{2.52}{126} = 0.02 mol.
  2. With benzoyl peroxide HBr adds anti-Markovnikov (free radical), so the major (9 parts) bromide is the primary one, 1-bromo-4-methyloctane; the minor is 2-bromo-4-methyloctane.
  3. Bromides formed =0.5×0.02=0.01= 0.5 \times 0.02 = 0.01 mol; primary bromide =910×0.01=0.009= \dfrac{9}{10} \times 0.01 = 0.009 mol.
  4. RBr+Et2NH→R−NEt2H+Br−\mathrm{RBr + Et_2NH \rightarrow R{-}NEt_2H^+Br^-}; K2CO3\mathrm{K_2CO_3} frees the tertiary amine S =CH3(CH2)3CH(CH3)CH2CH2CH2NEt2= \mathrm{CH_3(CH_2)_3CH(CH_3)CH_2CH_2CH_2NEt_2}, N,N-diethyl-4-methyloctan-1-amine, C13H29N\mathrm{C_{13}H_{29}N}.

    Why: The non-ionic product is the free amine, not its hydrobromide salt.

  5. M(C13H29N)=156+29+14=199M(\mathrm{C_{13}H_{29}N}) = 156 + 29 + 14 = 199. Mass =0.009×199=1.791= 0.009 \times 199 = 1.791 g =1791= 1791 mg.
AnswerAnswer: 1791 mg
Ask about this question

Chemistry, Section 4: 2 paragraphs, 2 questions on each, answer is a numerical value (truncate/round off to two decimal places): +3 if only the correct value is entered, 0 in all other cases

Q14

Chemistry, Question 14 (3 marks)

Thermodynamics (entropy, Kirchhoff relation) · +3
Paragraph I: The entropy versus temperature plot for phases α\alpha and β\beta at 1 bar pressure is given. STS_T and S0S_0 are entropies of the phases at temperatures T and 0 K, respectively. (The figure plots ST−S0S_T - S_0 (in J mol−1 K−1\mathrm{J\,mol^{-1}\,K^{-1}}) against temperature (K): two rising curves, β\beta above α\alpha. Dashed lines mark that at 600 K, ST−S0=6S_T - S_0 = 6 for β\beta and 55 for α\alpha.) The transition temperature for α\alpha to β\beta phase change is 600 K and Cp,β−Cp,α=1 J mol−1 K−1C_{p,\beta} - C_{p,\alpha} = 1\ \mathrm{J\,mol^{-1}\,K^{-1}}. Assume (Cp,β−Cp,α)(C_{p,\beta} - C_{p,\alpha}) is independent of temperature in the range of 200 to 700 K. Cp,αC_{p,\alpha} and Cp,βC_{p,\beta} are heat capacities of α\alpha and β\beta phases, respectively. Question: The value of entropy change, Sβ−SαS_\beta - S_\alpha (in J mol−1 K−1\mathrm{J\,mol^{-1}\,K^{-1}}), at 300 K is ___. [Use: ln⁡2=0.69\ln 2 = 0.69. Given: Sβ−Sα=0S_\beta - S_\alpha = 0 at 0 K]

Tests: Read ΔS at the transition from the plot and shift it to 300 K using ΔCp.

Show solution
  1. From the plot at 600 K: (ST−S0)β=6(S_T - S_0)_\beta = 6 and (ST−S0)α=5(S_T - S_0)_\alpha = 5. With S0,β=S0,αS_{0,\beta} = S_{0,\alpha}: ΔS(600)=Sβ−Sα=6−5=1 J mol−1 K−1\Delta S(600) = S_\beta - S_\alpha = 6 - 5 = 1\ \mathrm{J\,mol^{-1}\,K^{-1}}.
  2. Temperature dependence: d(ΔS)dT=ΔCpT\dfrac{d(\Delta S)}{dT} = \dfrac{\Delta C_p}{T}, so ΔS(T2)=ΔS(T1)+ΔCpln⁡T2T1\Delta S(T_2) = \Delta S(T_1) + \Delta C_p \ln\dfrac{T_2}{T_1}.

    Why: dS = Cp dT / T for each phase at constant pressure; subtract the two.

  3. ΔS(300)=1+1×ln⁡300600=1−ln⁡2=1−0.69=0.31 J mol−1 K−1\Delta S(300) = 1 + 1 \times \ln\dfrac{300}{600} = 1 - \ln 2 = 1 - 0.69 = 0.31\ \mathrm{J\,mol^{-1}\,K^{-1}}.
  4. With the given ln⁡2=0.69\ln 2 = 0.69 the value is exactly 0.31. (With the true ln⁡2=0.693\ln 2 = 0.693 it is 0.307, which is why 0.30 or 0.3 also appears in some keys.)
AnswerAnswer: 0.31
Ask about this question
Q15

Chemistry, Question 15 (3 marks)

Thermodynamics (enthalpy, Kirchhoff relation) · +3
Paragraph I: The entropy versus temperature plot for phases α\alpha and β\beta at 1 bar pressure is given. STS_T and S0S_0 are entropies of the phases at temperatures T and 0 K, respectively. (The figure plots ST−S0S_T - S_0 (in J mol−1 K−1\mathrm{J\,mol^{-1}\,K^{-1}}) against temperature (K): two rising curves, β\beta above α\alpha. Dashed lines mark that at 600 K, ST−S0=6S_T - S_0 = 6 for β\beta and 55 for α\alpha.) The transition temperature for α\alpha to β\beta phase change is 600 K and Cp,β−Cp,α=1 J mol−1 K−1C_{p,\beta} - C_{p,\alpha} = 1\ \mathrm{J\,mol^{-1}\,K^{-1}}. Assume (Cp,β−Cp,α)(C_{p,\beta} - C_{p,\alpha}) is independent of temperature in the range of 200 to 700 K. Cp,αC_{p,\alpha} and Cp,βC_{p,\beta} are heat capacities of α\alpha and β\beta phases, respectively. Question: The value of enthalpy change, Hβ−HαH_\beta - H_\alpha (in J mol−1\mathrm{J\,mol^{-1}}), at 300 K is ___.

Tests: Get ΔH at the transition from ΔG = 0 and shift it to 300 K with Kirchhoff's law.

Show solution
  1. At the transition temperature the two phases are in equilibrium: ΔG=0\Delta G = 0, so ΔH(600)=T ΔS(600)=600×1=600 J mol−1\Delta H(600) = T\,\Delta S(600) = 600 \times 1 = 600\ \mathrm{J\,mol^{-1}} (ΔS(600)=6−5=1\Delta S(600) = 6 - 5 = 1 from the plot).
  2. Kirchhoff: ΔH(T2)=ΔH(T1)+ΔCp(T2−T1)\Delta H(T_2) = \Delta H(T_1) + \Delta C_p (T_2 - T_1), with ΔCp=1 J mol−1 K−1\Delta C_p = 1\ \mathrm{J\,mol^{-1}\,K^{-1}} constant from 200 to 700 K.
  3. ΔH(300)=600+1×(300−600)=300 J mol−1\Delta H(300) = 600 + 1 \times (300 - 600) = 300\ \mathrm{J\,mol^{-1}}.
AnswerAnswer: 300
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

Amines and diazonium salts (structure from molar mass) · +3
Paragraph II: A trinitro compound, 1,3,5-tris-(4-nitrophenyl)benzene, on complete reaction with an excess of Sn/HCl gives a major product, which on treatment with an excess of NaNO2/HCl\mathrm{NaNO_2/HCl} at 0 ∘C0\ ^\circ\mathrm{C} provides P as the product. P, upon treatment with excess of H2O\mathrm{H_2O} at room temperature, gives the product Q. Bromination of Q in aqueous medium furnishes the product R. The compound P upon treatment with an excess of phenol under basic conditions gives the product S. The molar mass difference between compounds Q and R is 474 g mol−1474\ \mathrm{g\,mol^{-1}} and between compounds P and S is 172.5 g mol−1172.5\ \mathrm{g\,mol^{-1}}. Question: The number of heteroatoms present in one molecule of R is ______ . [Use: Molar mass (in g mol−1\mathrm{g\,mol^{-1}}): H = 1, C = 12, N = 14, O = 16, Br = 80, Cl = 35.5. Atoms other than C and H are considered as heteroatoms]

Tests: Use the given mass difference to fix the bromination product and count heteroatoms.

Show solution
  1. Sn/HCl reduces all three NO2\mathrm{NO_2} groups: 1,3,5-tris(4-aminophenyl)benzene, C6H3(C6H4NH2)3\mathrm{C_6H_3(C_6H_4NH_2)_3}.
  2. Excess NaNO2/HCl\mathrm{NaNO_2/HCl} at 0 ∘C0\ ^\circ\mathrm{C} diazotises all three: P =C6H3(C6H4N2+Cl−)3= \mathrm{C_6H_3(C_6H_4N_2^+Cl^-)_3}, the tris(diazonium chloride).
  3. Warm water hydrolyses each N2+\mathrm{N_2^+} to OH: Q == 1,3,5-tris(4-hydroxyphenyl)benzene, C24H18O3\mathrm{C_{24}H_{18}O_3}.
  4. Bromine water substitutes the free positions ortho to each OH (para is taken by the ring bond): 2 Br per ring, 6 Br in all. Check: each Br replaces H, +79+79; 6×79=4746 \times 79 = 474, the given Q→RQ \rightarrow R difference.

    Why: The mass data confirms exactly six bromines.

  5. R =C24H12Br6O3= \mathrm{C_{24}H_{12}Br_6O_3}: heteroatoms =6 Br+3 O=9= 6\ \mathrm{Br} + 3\ \mathrm{O} = 9.
AnswerAnswer: 9
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

Amines and diazonium salts (azo coupling) · +3
Paragraph II: A trinitro compound, 1,3,5-tris-(4-nitrophenyl)benzene, on complete reaction with an excess of Sn/HCl gives a major product, which on treatment with an excess of NaNO2/HCl\mathrm{NaNO_2/HCl} at 0 ∘C0\ ^\circ\mathrm{C} provides P as the product. P, upon treatment with excess of H2O\mathrm{H_2O} at room temperature, gives the product Q. Bromination of Q in aqueous medium furnishes the product R. The compound P upon treatment with an excess of phenol under basic conditions gives the product S. The molar mass difference between compounds Q and R is 474 g mol−1474\ \mathrm{g\,mol^{-1}} and between compounds P and S is 172.5 g mol−1172.5\ \mathrm{g\,mol^{-1}}. Question: The total number of carbon atoms and heteroatoms present in one molecule of S is ______ . [Use: Molar mass (in g mol−1\mathrm{g\,mol^{-1}}): H = 1, C = 12, N = 14, O = 16, Br = 80, Cl = 35.5. Atoms other than C and H are considered as heteroatoms]

Tests: Use the given mass difference to confirm triple azo coupling and count atoms.

Show solution
  1. Sn/HCl reduces all three NO2\mathrm{NO_2} groups: 1,3,5-tris(4-aminophenyl)benzene, C6H3(C6H4NH2)3\mathrm{C_6H_3(C_6H_4NH_2)_3}.
  2. Excess NaNO2/HCl\mathrm{NaNO_2/HCl} at 0 ∘C0\ ^\circ\mathrm{C} diazotises all three: P =C6H3(C6H4N2+Cl−)3= \mathrm{C_6H_3(C_6H_4N_2^+Cl^-)_3}, the tris(diazonium chloride).
  3. Excess phenol in base couples with each diazonium group at phenol's para position: ArN2+Cl−+C6H5OH→Ar−N=N−C6H4OH+HCl\mathrm{ArN_2^+Cl^- + C_6H_5OH \rightarrow Ar{-}N{=}N{-}C_6H_4OH + HCl}.
  4. Check: each coupling replaces Cl (35.5) by C6H4OH\mathrm{C_6H_4OH} (93): +57.5+57.5; three couplings =3×57.5=172.5= 3 \times 57.5 = 172.5, the given P→SP \rightarrow S difference. So all three groups couple.
  5. S =C6H3(C6H4−N=N−C6H4OH)3= \mathrm{C_6H_3(C_6H_4{-}N{=}N{-}C_6H_4OH)_3}: C =6+18+18=42= 6 + 18 + 18 = 42; N =6= 6; O =3= 3.
  6. Carbon + heteroatoms =42+6+3=51= 42 + 6 + 3 = 51.
AnswerAnswer: 51
Ask about this question

Questions are quoted from JEE (Advanced) 2023 Paper 2 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.