AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2024 Paper 2: Question Paper with Solutions and Answer Key

All 51 questions of JEE Advanced 2024 Paper 2 solved step by step: Mathematics, Physics and Chemistry, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2024 Paper 2: 51 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2024: Paper 1.

Mathematics, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Mathematics, Question 1 (3 marks)

Inverse trigonometric functions · +3 / −1
Considering only the principal values of the inverse trigonometric functions, the value of tan⁡(sin⁡−1(35)−2cos⁡−1(25))\tan\left(\sin^{-1}\left(\dfrac{3}{5}\right) - 2\cos^{-1}\left(\dfrac{2}{\sqrt{5}}\right)\right) is
  1. (A)724\dfrac{7}{24}
  2. (B)−724\dfrac{-7}{24}
  3. (C)−524\dfrac{-5}{24}
  4. (D)524\dfrac{5}{24}

Tests: Turn inverse trig values into tan values and combine them with the tan subtraction and double-angle formulas.

Show solution
  1. Let A=sin⁡−135A = \sin^{-1}\dfrac{3}{5}, an angle in (0,π2)\left(0, \dfrac{\pi}{2}\right) with cos⁡A=45\cos A = \dfrac{4}{5}, so tan⁡A=34\tan A = \dfrac{3}{4}.
  2. Let B=cos⁡−125B = \cos^{-1}\dfrac{2}{\sqrt{5}}, in (0,π2)\left(0, \dfrac{\pi}{2}\right) with sin⁡B=15\sin B = \dfrac{1}{\sqrt{5}}, so tan⁡B=12\tan B = \dfrac{1}{2}.
  3. tan⁡2B=2⋅121−14=43\tan 2B = \dfrac{2 \cdot \frac{1}{2}}{1 - \frac{1}{4}} = \dfrac{4}{3}.

    Why: Double-angle formula for tan.

  4. tan⁡(A−2B)=34−431+34⋅43=−7122=−724\tan(A - 2B) = \dfrac{\frac{3}{4} - \frac{4}{3}}{1 + \frac{3}{4} \cdot \frac{4}{3}} = \dfrac{-\frac{7}{12}}{2} = -\dfrac{7}{24}.
AnswerAnswer: (B) −724\dfrac{-7}{24}
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Area under curves · +3 / −1
Let S={(x,y)∈R×R:x≥0, y≥0, y2≤4x, y2≤12−2x and 3y+8 x≤58}S = \left\{(x, y) \in \mathbb{R} \times \mathbb{R} : x \ge 0,\ y \ge 0,\ y^2 \le 4x,\ y^2 \le 12 - 2x \text{ and } 3y + \sqrt{8}\,x \le 5\sqrt{8}\right\}. If the area of the region SS is α2\alpha\sqrt{2}, then α\alpha is equal to
  1. (A)172\dfrac{17}{2}
  2. (B)173\dfrac{17}{3}
  3. (C)174\dfrac{17}{4}
  4. (D)175\dfrac{17}{5}

Tests: Find the area of a region bounded by two parabolas and a line by integrating along y.

Show solution
  1. The parabolas y2=4xy^2 = 4x and y2=12−2xy^2 = 12 - 2x meet where 4x=12−2x4x = 12 - 2x: x=2x = 2, y=22y = 2\sqrt{2} (taking y≥0y \ge 0).
  2. The line 3y+22 x=1023y + 2\sqrt{2}\,x = 10\sqrt{2} also passes through (2,22)(2, 2\sqrt{2}): 62+42=1026\sqrt{2} + 4\sqrt{2} = 10\sqrt{2}.

    Why: All three boundaries meet at one point, so the region closes there.

  3. For 0≤y≤220 \le y \le 2\sqrt{2}, the line is to the left of y2=12−2xy^2 = 12 - 2x (at y=0y = 0 it gives x=5<6x = 5 < 6; they meet again only at y=−12y = -\tfrac{1}{\sqrt{2}}). So the right boundary is the line x=5−3y22x = 5 - \dfrac{3y}{2\sqrt{2}} and the left boundary is x=y24x = \dfrac{y^2}{4}.
  4. Area =∫022(5−3y22−y24)dy=102−322⋅82−(22)312= \displaystyle\int_0^{2\sqrt{2}} \left(5 - \dfrac{3y}{2\sqrt{2}} - \dfrac{y^2}{4}\right) dy = 10\sqrt{2} - \dfrac{3}{2\sqrt{2}} \cdot \dfrac{8}{2} - \dfrac{(2\sqrt{2})^3}{12}.

    Why: Strips parallel to the x-axis avoid splitting the region.

  5. =102−32−423=1723= 10\sqrt{2} - 3\sqrt{2} - \dfrac{4\sqrt{2}}{3} = \dfrac{17\sqrt{2}}{3}, so α=173\alpha = \dfrac{17}{3}.
AnswerAnswer: (B) 173\dfrac{17}{3}
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Limits (1 to the power infinity) · +3 / −1
Let k∈Rk \in \mathbb{R}. If lim⁡x→0+(sin⁡(sin⁡kx)+cos⁡x+x)2x=e6\displaystyle\lim_{x \rightarrow 0^+} \left(\sin(\sin kx) + \cos x + x\right)^{\frac{2}{x}} = e^6, then the value of kk is
  1. (A)1
  2. (B)2
  3. (C)3
  4. (D)4

Tests: Evaluate a 1^∞ limit with the rule lim f^g = e^{lim g(f − 1)}.

Show solution
  1. As x→0+x \rightarrow 0^+, the base →0+1+0=1\rightarrow 0 + 1 + 0 = 1 and the exponent →∞\rightarrow \infty: a 1∞1^\infty form.
  2. So the limit is eLe^{L} with L=lim⁡x→0+2x(sin⁡(sin⁡kx)+cos⁡x+x−1)L = \displaystyle\lim_{x \rightarrow 0^+} \dfrac{2}{x}\left(\sin(\sin kx) + \cos x + x - 1\right).

    Why: For a 1^∞ form, lim f^g = e^{lim g(f − 1)}.

  3. sin⁡(sin⁡kx)x→k\dfrac{\sin(\sin kx)}{x} \rightarrow k, cos⁡x−1x→0\dfrac{\cos x - 1}{x} \rightarrow 0, xx=1\dfrac{x}{x} = 1. So L=2(k+0+1)=2k+2L = 2(k + 0 + 1) = 2k + 2.
  4. 2k+2=62k + 2 = 6 gives k=2k = 2.
AnswerAnswer: (B) 2
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Trigonometric equations · +3 / −1
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be a function defined by f(x)={x2sin⁡(πx2),if x≠0,0,if x=0.f(x) = \begin{cases} x^2\sin\left(\dfrac{\pi}{x^2}\right), & \text{if } x \ne 0, \\ 0, & \text{if } x = 0. \end{cases} Then which of the following statements is TRUE?
  1. (A)f(x)=0f(x) = 0 has infinitely many solutions in the interval [11010,∞)\left[\dfrac{1}{10^{10}}, \infty\right).
  2. (B)f(x)=0f(x) = 0 has no solutions in the interval [1π,∞)\left[\dfrac{1}{\pi}, \infty\right).
  3. (C)The set of solutions of f(x)=0f(x) = 0 in the interval (0,11010)\left(0, \dfrac{1}{10^{10}}\right) is finite.
  4. (D)f(x)=0f(x) = 0 has more than 25 solutions in the interval (1π2,1π)\left(\dfrac{1}{\pi^2}, \dfrac{1}{\pi}\right).

Tests: Locate the zeros x = ±1/√n of x² sin(π/x²) and count them in an interval.

Show solution
  1. For x≠0x \ne 0: f(x)=0  ⟺  sin⁡πx2=0  ⟺  πx2=nπf(x) = 0 \iff \sin\dfrac{\pi}{x^2} = 0 \iff \dfrac{\pi}{x^2} = n\pi with n∈Nn \in \mathbb{N} (it is positive), i.e. x=±1nx = \pm\dfrac{1}{\sqrt{n}}.
  2. (A) 1n≥10−10  ⟺  n≤1020\dfrac{1}{\sqrt{n}} \ge 10^{-10} \iff n \le 10^{20}: finitely many. False.
  3. (B) n=1n = 1 gives x=1≥1πx = 1 \ge \dfrac{1}{\pi}, a solution. False.
  4. (C) 1n<10−10  ⟺  n>1020\dfrac{1}{\sqrt{n}} < 10^{-10} \iff n > 10^{20}: infinitely many. False.
  5. (D) 1π2<1n<1π  ⟺  π<n<π2  ⟺  π2<n<π4\dfrac{1}{\pi^2} < \dfrac{1}{\sqrt{n}} < \dfrac{1}{\pi} \iff \pi < \sqrt{n} < \pi^2 \iff \pi^2 < n < \pi^4, i.e. 9.87<n<97.49.87 < n < 97.4: n=10,11,…,97n = 10, 11, \ldots, 97, which is 88 solutions. True.
AnswerAnswer: (D)
Ask about this question

Mathematics, Section 2: 3 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q5

Mathematics, Question 5 (4 marks)

Limits at infinity · +4 / −2
Let SS be the set of all (α,β)∈R×R(\alpha, \beta) \in \mathbb{R} \times \mathbb{R} such that lim⁡x→∞sin⁡(x2)(log⁡ex)αsin⁡(1x2)xαβ(log⁡e(1+x))β=0\displaystyle\lim_{x \rightarrow \infty} \dfrac{\sin(x^2)(\log_e x)^\alpha \sin\left(\dfrac{1}{x^2}\right)}{x^{\alpha\beta}(\log_e(1 + x))^\beta} = 0. Then which of the following is (are) correct?
  1. (A)(−1,3)∈S(-1, 3) \in S
  2. (B)(−1,1)∈S(-1, 1) \in S
  3. (C)(1,−1)∈S(1, -1) \in S
  4. (D)(1,−2)∈S(1, -2) \in S

Tests: Decide when an oscillating factor times a power of x and a power of log x tends to 0.

Show solution
  1. As x→∞x \rightarrow \infty: sin⁡1x2∼1x2\sin\dfrac{1}{x^2} \sim \dfrac{1}{x^2} and log⁡e(1+x)log⁡ex→1\dfrac{\log_e(1 + x)}{\log_e x} \rightarrow 1. So the expression behaves like sin⁡(x2)⋅x−(2+αβ)(log⁡ex)α−β\sin(x^2) \cdot x^{-(2 + \alpha\beta)}(\log_e x)^{\alpha - \beta}.
  2. sin⁡(x2)\sin(x^2) keeps oscillating between −1-1 and 11, so the limit is 0 exactly when h(x)=x−(2+αβ)(log⁡ex)α−β→0h(x) = x^{-(2 + \alpha\beta)}(\log_e x)^{\alpha - \beta} \rightarrow 0: either 2+αβ>02 + \alpha\beta > 0, or 2+αβ=02 + \alpha\beta = 0 and α−β<0\alpha - \beta < 0.

    Why: A power of x beats any power of log x; a bounded factor times something tending to 0 tends to 0.

  3. (A) αβ=−3\alpha\beta = -3: h=x1(log⁡ex)−4→∞h = x^{1}(\log_e x)^{-4} \rightarrow \infty, and the expression oscillates without a limit. Not in S.
  4. (B) αβ=−1\alpha\beta = -1: h=x−1(log⁡ex)−2→0h = x^{-1}(\log_e x)^{-2} \rightarrow 0. In S.
  5. (C) αβ=−1\alpha\beta = -1: h=x−1(log⁡ex)2→0h = x^{-1}(\log_e x)^{2} \rightarrow 0. In S.
  6. (D) αβ=−2\alpha\beta = -2: h=x0(log⁡ex)3→∞h = x^{0}(\log_e x)^{3} \rightarrow \infty. Not in S.
AnswerAnswer: (B), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Three-dimensional geometry (lines and planes) · +4 / −2
A straight line drawn from the point P(1,3,2)P(1, 3, 2), parallel to the line x−21=y−42=z−61\dfrac{x - 2}{1} = \dfrac{y - 4}{2} = \dfrac{z - 6}{1}, intersects the plane L1:x−y+3z=6L_1 : x - y + 3z = 6 at the point QQ. Another straight line which passes through QQ and is perpendicular to the plane L1L_1 intersects the plane L2:2x−y+z=−4L_2 : 2x - y + z = -4 at the point RR. Then which of the following statements is (are) TRUE?
  1. (A)The length of the line segment PQPQ is 6\sqrt{6}
  2. (B)The coordinates of RR are (1,6,3)(1, 6, 3)
  3. (C)The centroid of the triangle PQRPQR is (43,143,53)\left(\dfrac{4}{3}, \dfrac{14}{3}, \dfrac{5}{3}\right)
  4. (D)The perimeter of the triangle PQRPQR is 2+6+11\sqrt{2} + \sqrt{6} + \sqrt{11}

Tests: Find where a line meets a plane by substituting its parametric point into the plane.

Show solution
  1. Line through PP with direction (1,2,1)(1, 2, 1): (1+t,3+2t,2+t)(1 + t, 3 + 2t, 2 + t). In L1L_1: (1+t)−(3+2t)+3(2+t)=4+2t=6(1 + t) - (3 + 2t) + 3(2 + t) = 4 + 2t = 6, so t=1t = 1 and Q=(2,5,3)Q = (2, 5, 3).
  2. Line through QQ along the normal (1,−1,3)(1, -1, 3) of L1L_1: (2+s,5−s,3+3s)(2 + s, 5 - s, 3 + 3s). In L2L_2: 2(2+s)−(5−s)+(3+3s)=2+6s=−42(2 + s) - (5 - s) + (3 + 3s) = 2 + 6s = -4, so s=−1s = -1 and R=(1,6,0)R = (1, 6, 0).
  3. (A) PQ=∣t∣1+4+1=6PQ = |t|\sqrt{1 + 4 + 1} = \sqrt{6}. True.
  4. (B) R=(1,6,0)R = (1, 6, 0), not (1,6,3)(1, 6, 3). False.
  5. (C) Centroid =(1+2+13,3+5+63,2+3+03)=(43,143,53)= \left(\dfrac{1 + 2 + 1}{3}, \dfrac{3 + 5 + 6}{3}, \dfrac{2 + 3 + 0}{3}\right) = \left(\dfrac{4}{3}, \dfrac{14}{3}, \dfrac{5}{3}\right). True.
  6. (D) QR=∣s∣1+1+9=11QR = |s|\sqrt{1 + 1 + 9} = \sqrt{11}, PR=∣(0,3,−2)∣=13PR = |(0, 3, -2)| = \sqrt{13}. Perimeter =6+11+13= \sqrt{6} + \sqrt{11} + \sqrt{13}. False.
AnswerAnswer: (A), (C)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Parabola (tangents) · +4 / −2
Let A1,B1,C1A_1, B_1, C_1 be three points in the xyxy-plane. Suppose that the lines A1C1A_1C_1 and B1C1B_1C_1 are tangents to the curve y2=8xy^2 = 8x at A1A_1 and B1B_1, respectively. If O=(0,0)O = (0, 0) and C1=(−4,0)C_1 = (-4, 0), then which of the following statements is (are) TRUE?
  1. (A)The length of the line segment OA1OA_1 is 434\sqrt{3}
  2. (B)The length of the line segment A1B1A_1B_1 is 1616
  3. (C)The orthocenter of the triangle A1B1C1A_1B_1C_1 is (0,0)(0, 0)
  4. (D)The orthocenter of the triangle A1B1C1A_1B_1C_1 is (1,0)(1, 0)

Tests: Find the points of contact of tangents from an external point to a parabola and use them in a triangle.

Show solution
  1. y2=8xy^2 = 8x has a=2a = 2. The tangent at (2t2,4t)(2t^2, 4t) is ty=x+2t2ty = x + 2t^2. Through (−4,0)(-4, 0): 0=−4+2t20 = -4 + 2t^2, so t=±2t = \pm\sqrt{2}.
  2. Points of contact: A1=(4,42)A_1 = (4, 4\sqrt{2}), B1=(4,−42)B_1 = (4, -4\sqrt{2}) (or the other way round; the answers do not change).
  3. (A) OA1=16+32=48=43OA_1 = \sqrt{16 + 32} = \sqrt{48} = 4\sqrt{3}. True.
  4. (B) A1B1=82≠16A_1B_1 = 8\sqrt{2} \ne 16. False.
  5. The triangle is symmetric about the x-axis, so the orthocentre is (h,0)(h, 0). The altitude from A1A_1 is perpendicular to B1C1B_1C_1, whose direction is (8,−42)(8, -4\sqrt{2}): (h−4)⋅8+(−42)(−42)=0(h - 4)\cdot 8 + (-4\sqrt{2})(-4\sqrt{2}) = 0, so 8h−32+32=08h - 32 + 32 = 0, h=0h = 0.

    Why: The altitude from C₁ is the x-axis itself, so the orthocentre lies on it.

  6. (C) The orthocentre is (0,0)(0, 0). True. (D) False.
AnswerAnswer: (A), (C)
Ask about this question

Mathematics, Section 3: 6 questions, answer is a non-negative integer: +4 if only the correct integer is entered, 0 in all other cases

Q8

Mathematics, Question 8 (4 marks)

Functional equations · +4
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be a function such that f(x+y)=f(x)+f(y)f(x + y) = f(x) + f(y) for all x,y∈Rx, y \in \mathbb{R}, and g:R→(0,∞)g : \mathbb{R} \rightarrow (0, \infty) be a function such that g(x+y)=g(x)g(y)g(x + y) = g(x)g(y) for all x,y∈Rx, y \in \mathbb{R}. If f(−35)=12f\left(\dfrac{-3}{5}\right) = 12 and g(−13)=2g\left(\dfrac{-1}{3}\right) = 2, then the value of (f(14)+g(−2)−8)g(0)\left(f\left(\dfrac{1}{4}\right) + g(-2) - 8\right)g(0) is ________.

Tests: Use Cauchy's additive and multiplicative equations to find f(x) = kx and g(x) = a^x at rational points.

Show solution
  1. From f(x+y)=f(x)+f(y)f(x + y) = f(x) + f(y): f(0)=0f(0) = 0, f(−x)=−f(x)f(-x) = -f(x) and f(qx)=qf(x)f(qx) = q f(x) for every rational qq. So f(q)=q f(1)f(q) = q\,f(1) for rational qq.

    Why: No continuity is needed when only rational inputs are used.

  2. f(−35)=−35f(1)=12f\left(-\dfrac{3}{5}\right) = -\dfrac{3}{5}f(1) = 12, so f(1)=−20f(1) = -20 and f(14)=−5f\left(\dfrac{1}{4}\right) = -5.
  3. From g(x+y)=g(x)g(y)g(x + y) = g(x)g(y) with g>0g > 0: g(0)=1g(0) = 1 and g(q)=g(1)qg(q) = g(1)^q for rational qq.
  4. g(−13)=g(1)−1/3=2g\left(-\dfrac{1}{3}\right) = g(1)^{-1/3} = 2, so g(1)=18g(1) = \dfrac{1}{8} and g(−2)=82=64g(-2) = 8^2 = 64.
  5. (−5+64−8)×1=51\left(-5 + 64 - 8\right) \times 1 = 51.
AnswerAnswer: 51
Ask about this question
Q9

Mathematics, Question 9 (4 marks)

Probability (conditional probability) · +4
A bag contains NN balls out of which 3 balls are white, 6 balls are green, and the remaining balls are blue. Assume that the balls are identical otherwise. Three balls are drawn randomly one after the other without replacement. For i=1,2,3i = 1, 2, 3, let WiW_i, GiG_i, and BiB_i denote the events that the ball drawn in the ithi^{\text{th}} draw is a white ball, green ball, and blue ball, respectively. If the probability P(W1∩G2∩B3)=25NP(W_1 \cap G_2 \cap B_3) = \dfrac{2}{5N} and the conditional probability P(B3∣W1∩G2)=29P(B_3 \mid W_1 \cap G_2) = \dfrac{2}{9}, then NN equals ______.

Tests: Write a conditional probability for draws without replacement and solve for the number of balls.

Show solution
  1. After one white and one green are removed, N−2N - 2 balls remain, of which N−9N - 9 are blue. So P(B3∣W1∩G2)=N−9N−2P(B_3 \mid W_1 \cap G_2) = \dfrac{N - 9}{N - 2}.
  2. N−9N−2=29⇒9N−81=2N−4⇒N=11\dfrac{N - 9}{N - 2} = \dfrac{2}{9} \Rightarrow 9N - 81 = 2N - 4 \Rightarrow N = 11.
  3. Check the other condition: P(W1∩G2∩B3)=311⋅610⋅29=255=25⋅11P(W_1 \cap G_2 \cap B_3) = \dfrac{3}{11} \cdot \dfrac{6}{10} \cdot \dfrac{2}{9} = \dfrac{2}{55} = \dfrac{2}{5 \cdot 11}. ✓

    Why: Both given facts must hold for the same N.

AnswerAnswer: 11
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Roots of equations (monotonicity) · +4
Let the function f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be defined by f(x)=sin⁡xeπx(x2023+2024x+2025)(x2−x+3)+2eπx(x2023+2024x+2025)(x2−x+3)f(x) = \dfrac{\sin x}{e^{\pi x}} \dfrac{\left(x^{2023} + 2024x + 2025\right)}{\left(x^2 - x + 3\right)} + \dfrac{2}{e^{\pi x}} \dfrac{\left(x^{2023} + 2024x + 2025\right)}{\left(x^2 - x + 3\right)}. Then the number of solutions of f(x)=0f(x) = 0 in R\mathbb{R} is ______.

Tests: Count the real roots of a product by discarding the factors that never vanish and checking monotonicity.

Show solution
  1. Factor: f(x)=(sin⁡x+2)(x2023+2024x+2025)eπx(x2−x+3)f(x) = \dfrac{(\sin x + 2)\left(x^{2023} + 2024x + 2025\right)}{e^{\pi x}\left(x^2 - x + 3\right)}.
  2. sin⁡x+2≥1>0\sin x + 2 \ge 1 > 0, eπx>0e^{\pi x} > 0 and x2−x+3>0x^2 - x + 3 > 0 (discriminant 1−12<01 - 12 < 0). So f(x)=0  ⟺  x2023+2024x+2025=0f(x) = 0 \iff x^{2023} + 2024x + 2025 = 0.
  3. h(x)=x2023+2024x+2025h(x) = x^{2023} + 2024x + 2025 has h′(x)=2023x2022+2024>0h'(x) = 2023x^{2022} + 2024 > 0: strictly increasing, with h→∓∞h \rightarrow \mp\infty as x→∓∞x \rightarrow \mp\infty. So it has exactly one real root.

    Why: An odd-degree, strictly increasing polynomial crosses zero once.

  4. (Indeed h(−1)=−1−2024+2025=0h(-1) = -1 - 2024 + 2025 = 0.)
AnswerAnswer: 1
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Vectors (cross product) · +4
Let p⃗=2i^+j^+3k^\vec{p} = 2\hat{i} + \hat{j} + 3\hat{k} and q⃗=i^−j^+k^\vec{q} = \hat{i} - \hat{j} + \hat{k}. If for some real numbers α\alpha, β\beta, and γ\gamma, we have 15i^+10j^+6k^=α(2p⃗+q⃗)+β(p⃗−2q⃗)+γ(p⃗×q⃗)15\hat{i} + 10\hat{j} + 6\hat{k} = \alpha\left(2\vec{p} + \vec{q}\right) + \beta\left(\vec{p} - 2\vec{q}\right) + \gamma\left(\vec{p} \times \vec{q}\right), then the value of γ\gamma is _______.

Tests: Isolate the coefficient of p × q by dotting with p × q.

Show solution
  1. p⃗×q⃗=∣i^j^k^2131−11∣=(1+3)i^−(2−3)j^+(−2−1)k^=4i^+j^−3k^\vec{p} \times \vec{q} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 2 & 1 & 3 \\ 1 & -1 & 1 \end{vmatrix} = (1 + 3)\hat{i} - (2 - 3)\hat{j} + (-2 - 1)\hat{k} = 4\hat{i} + \hat{j} - 3\hat{k}.
  2. Take the dot product of both sides with p⃗×q⃗\vec{p} \times \vec{q}: the first two terms vanish, since p⃗×q⃗\vec{p} \times \vec{q} is perpendicular to p⃗\vec{p} and q⃗\vec{q}.

    Why: This removes α and β in one move.

  3. Left side: (15,10,6)⋅(4,1,−3)=60+10−18=52(15, 10, 6) \cdot (4, 1, -3) = 60 + 10 - 18 = 52. Right side: γ ∣p⃗×q⃗∣2=γ(16+1+9)=26γ\gamma\,|\vec{p} \times \vec{q}|^2 = \gamma(16 + 1 + 9) = 26\gamma.
  4. γ=5226=2\gamma = \dfrac{52}{26} = 2.
AnswerAnswer: 2
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Parabola (normals) · +4
A normal with slope 16\dfrac{1}{\sqrt{6}} is drawn from the point (0,−α)(0, -\alpha) to the parabola x2=−4ayx^2 = -4ay, where a>0a > 0. Let LL be the line passing through (0,−α)(0, -\alpha) and parallel to the directrix of the parabola. Suppose that LL intersects the parabola at two points AA and BB. Let rr denote the length of the latus rectum and ss denote the square of the length of the line segment ABAB. If r:s=1:16r : s = 1 : 16, then the value of 24a24a is __________.

Tests: Write the normal to a downward parabola in parametric form and use the chord parallel to the directrix.

Show solution
  1. Take the point (2at,−at2)(2at, -at^2) on x2=−4ayx^2 = -4ay. Slope of the tangent =dydx=−x2a=−t= \dfrac{dy}{dx} = -\dfrac{x}{2a} = -t, so the normal has slope 1t\dfrac{1}{t}.
  2. 1t=16⇒t=6\dfrac{1}{t} = \dfrac{1}{\sqrt{6}} \Rightarrow t = \sqrt{6}: the foot is (26 a,−6a)(2\sqrt{6}\,a, -6a). Normal: y+6a=16(x−26 a)y + 6a = \dfrac{1}{\sqrt{6}}\left(x - 2\sqrt{6}\,a\right).
  3. At x=0x = 0: y=−6a−2a=−8ay = -6a - 2a = -8a, so α=8a\alpha = 8a.
  4. The directrix is y=ay = a (horizontal), so LL is y=−8ay = -8a. Then x2=32a2x^2 = 32a^2, x=±42 ax = \pm 4\sqrt{2}\,a, AB=82 aAB = 8\sqrt{2}\,a and s=128a2s = 128a^2.
  5. r=4ar = 4a, so rs=4a128a2=132a=116⇒a=12\dfrac{r}{s} = \dfrac{4a}{128a^2} = \dfrac{1}{32a} = \dfrac{1}{16} \Rightarrow a = \dfrac{1}{2}, and 24a=1224a = 12.
AnswerAnswer: 12
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Definite integration (graphical) · +4
Let the function f:[1,∞)→Rf : [1, \infty) \rightarrow \mathbb{R} be defined by f(t)={(−1)n+1 2,if t=2n−1, n∈N,(2n+1−t)2f(2n−1)+(t−(2n−1))2f(2n+1),if 2n−1<t<2n+1, n∈N.f(t) = \begin{cases} (-1)^{n+1}\,2, & \text{if } t = 2n - 1,\ n \in \mathbb{N}, \\ \dfrac{(2n + 1 - t)}{2}f(2n - 1) + \dfrac{(t - (2n - 1))}{2}f(2n + 1), & \text{if } 2n - 1 < t < 2n + 1,\ n \in \mathbb{N}. \end{cases} Define g(x)=∫1xf(t) dtg(x) = \displaystyle\int_1^x f(t)\,dt, x∈(1,∞)x \in (1, \infty). Let α\alpha denote the number of solutions of the equation g(x)=0g(x) = 0 in the interval (1,8](1, 8] and β=lim⁡x→1+g(x)x−1\beta = \displaystyle\lim_{x \rightarrow 1^+} \dfrac{g(x)}{x - 1}. Then the value of α+β\alpha + \beta is equal to _____.

Tests: Read the integral of a piecewise-linear function from signed areas and use g'(1) = f(1).

Show solution
  1. At odd points f(1)=2f(1) = 2, f(3)=−2f(3) = -2, f(5)=2f(5) = 2, f(7)=−2f(7) = -2, f(9)=2f(9) = 2; between consecutive odd points ff is the straight line joining them.

    Why: The weights (2n + 1 − t)/2 and (t − (2n − 1))/2 are linear interpolation.

  2. So ff is a zig-zag: it is 0 at every even integer, positive on (1,2)(1, 2), negative on (2,4)(2, 4), positive on (4,6)(4, 6), negative on (6,8)(6, 8). Each triangle between consecutive zeros 2 apart has area 2; the half-triangle on (1,2)(1, 2) has area 1.
  3. g(2)=1g(2) = 1, g(3)=1−1=0g(3) = 1 - 1 = 0, g(4)=−1g(4) = -1, g(5)=0g(5) = 0, g(6)=1g(6) = 1, g(7)=0g(7) = 0, g(8)=−1g(8) = -1. Between these gg is monotonic, so it vanishes on (1,8](1, 8] only at x=3,5,7x = 3, 5, 7: α=3\alpha = 3.

    Why: g rises where f > 0 and falls where f < 0.

  4. β=lim⁡x→1+g(x)−g(1)x−1=f(1)=2\beta = \displaystyle\lim_{x \rightarrow 1^+} \dfrac{g(x) - g(1)}{x - 1} = f(1) = 2, since ff is continuous on the right at 1 and g(1)=0g(1) = 0.
  5. α+β=3+2=5\alpha + \beta = 3 + 2 = 5.
AnswerAnswer: 5
Ask about this question

Mathematics, Section 4: 2 paragraphs with 2 questions each, numerical value answer (truncate or round off to two decimal places): +3 if only the correct value is entered, 0 in all other cases

Q14

Mathematics, Question 14 (3 marks)

Relations and combinations · +3
Paragraph "I": Let S={1,2,3,4,5,6}S = \{1, 2, 3, 4, 5, 6\} and XX be the set of all relations RR from SS to SS that satisfy both the following properties: (i) RR has exactly 6 elements. (ii) For each (a,b)∈R(a, b) \in R, we have ∣a−b∣≥2|a - b| \ge 2. Let Y={R∈X:The range of R has exactly one element}Y = \{R \in X : \text{The range of } R \text{ has exactly one element}\} and Z={R∈X:R is a function from S to S}Z = \{R \in X : R \text{ is a function from } S \text{ to } S\}. Let n(A)n(A) denote the number of elements in a set AA.

Question: If n(X)=mC6n(X) = {}^{m}C_6, then the value of mm is __________.

Tests: Count relations as subsets of the allowed ordered pairs.

Show solution
  1. A relation in XX is any 6-element subset of the set PP of ordered pairs (a,b)∈S×S(a, b) \in S \times S with ∣a−b∣≥2|a - b| \ge 2.
  2. S×SS \times S has 36 pairs. Pairs with ∣a−b∣=0|a - b| = 0: 6. Pairs with ∣a−b∣=1|a - b| = 1: 2×5=102 \times 5 = 10. So ∣P∣=36−16=20|P| = 36 - 16 = 20.
  3. n(X)=20C6n(X) = {}^{20}C_6, so m=20m = 20.
AnswerAnswer: 20
Ask about this question
Q15

Mathematics, Question 15 (3 marks)

Relations and functions (counting) · +3
Paragraph "I": Let S={1,2,3,4,5,6}S = \{1, 2, 3, 4, 5, 6\} and XX be the set of all relations RR from SS to SS that satisfy both the following properties: (i) RR has exactly 6 elements. (ii) For each (a,b)∈R(a, b) \in R, we have ∣a−b∣≥2|a - b| \ge 2. Let Y={R∈X:The range of R has exactly one element}Y = \{R \in X : \text{The range of } R \text{ has exactly one element}\} and Z={R∈X:R is a function from S to S}Z = \{R \in X : R \text{ is a function from } S \text{ to } S\}. Let n(A)n(A) denote the number of elements in a set AA.

Question: If the value of n(Y)+n(Z)n(Y) + n(Z) is k2k^2, then ∣k∣|k| is _____________.

Tests: Count functions with a restriction on each image, and spot an impossible case.

Show solution
  1. For each bb, the number of a∈Sa \in S with ∣a−b∣≥2|a - b| \ge 2: b=1b = 1: {3,4,5,6}\{3, 4, 5, 6\}, 4; b=2b = 2: 3; b=3b = 3: 3; b=4b = 4: 3; b=5b = 5: 3; b=6b = 6: {1,2,3,4}\{1, 2, 3, 4\}, 4. The same counts hold for each aa by symmetry.
  2. YY: range {b}\{b\} means all 6 pairs are (a,b)(a, b) with the same bb, so 6 different aa's at distance ≥2\ge 2 from bb. At most 4 exist, so n(Y)=0n(Y) = 0.
  3. ZZ: a function sends each aa to exactly one bb with ∣a−b∣≥2|a - b| \ge 2 (that is exactly 6 pairs). Choices: 4⋅3⋅3⋅3⋅3⋅4=12964 \cdot 3 \cdot 3 \cdot 3 \cdot 3 \cdot 4 = 1296.

    Why: Images of different elements are chosen independently.

  4. n(Y)+n(Z)=1296=362n(Y) + n(Z) = 1296 = 36^2, so ∣k∣=36|k| = 36.
AnswerAnswer: 36
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Definite integration (properties) · +3
Paragraph "II": Let f:[0,π2]→[0,1]f : \left[0, \dfrac{\pi}{2}\right] \rightarrow [0, 1] be the function defined by f(x)=sin⁡2xf(x) = \sin^2 x and let g:[0,π2]→[0,∞)g : \left[0, \dfrac{\pi}{2}\right] \rightarrow [0, \infty) be the function defined by g(x)=πx2−x2g(x) = \sqrt{\dfrac{\pi x}{2} - x^2}.

Question: The value of 2∫0π/2f(x)g(x) dx−∫0π/2g(x) dx2\displaystyle\int_0^{\pi/2} f(x)g(x)\,dx - \int_0^{\pi/2} g(x)\,dx is __________.

Tests: Use the property ∫₀^a h(x) dx = ∫₀^a h(a − x) dx when g is symmetric about a/2.

Show solution
  1. g(x)=πx2−x2=x(π2−x)g(x) = \sqrt{\dfrac{\pi x}{2} - x^2} = \sqrt{x\left(\dfrac{\pi}{2} - x\right)}, so g(π2−x)=g(x)g\left(\dfrac{\pi}{2} - x\right) = g(x).
  2. Let I=∫0π/2sin⁡2x g(x) dxI = \displaystyle\int_0^{\pi/2} \sin^2 x\,g(x)\,dx. Replacing xx by π2−x\dfrac{\pi}{2} - x: I=∫0π/2cos⁡2x g(x) dxI = \displaystyle\int_0^{\pi/2} \cos^2 x\,g(x)\,dx.

    Why: The King property: ∫₀^a h(x) dx = ∫₀^a h(a − x) dx.

  3. Adding: 2I=∫0π/2(sin⁡2x+cos⁡2x) g(x) dx=∫0π/2g(x) dx2I = \displaystyle\int_0^{\pi/2} (\sin^2 x + \cos^2 x)\,g(x)\,dx = \int_0^{\pi/2} g(x)\,dx.
  4. So 2I−∫0π/2g(x) dx=02I - \displaystyle\int_0^{\pi/2} g(x)\,dx = 0.
AnswerAnswer: 0
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Definite integration (area of a semicircle) · +3
Paragraph "II": Let f:[0,π2]→[0,1]f : \left[0, \dfrac{\pi}{2}\right] \rightarrow [0, 1] be the function defined by f(x)=sin⁡2xf(x) = \sin^2 x and let g:[0,π2]→[0,∞)g : \left[0, \dfrac{\pi}{2}\right] \rightarrow [0, \infty) be the function defined by g(x)=πx2−x2g(x) = \sqrt{\dfrac{\pi x}{2} - x^2}.

Question: The value of 16π3∫0π/2f(x)g(x) dx\dfrac{16}{\pi^3}\displaystyle\int_0^{\pi/2} f(x)g(x)\,dx is ____________.

Tests: Recognise a square-root integral as the area of a semicircle.

Show solution
  1. By the symmetry g(π2−x)=g(x)g\left(\dfrac{\pi}{2} - x\right) = g(x) (see Q16): ∫0π/2f(x)g(x) dx=12∫0π/2g(x) dx\displaystyle\int_0^{\pi/2} f(x)g(x)\,dx = \dfrac{1}{2}\int_0^{\pi/2} g(x)\,dx.
  2. y=πx2−x2y = \sqrt{\dfrac{\pi x}{2} - x^2} means (x−π4)2+y2=π216\left(x - \dfrac{\pi}{4}\right)^2 + y^2 = \dfrac{\pi^2}{16}, y≥0y \ge 0: the upper half of a circle of radius π4\dfrac{\pi}{4} centred at (π4,0)\left(\dfrac{\pi}{4}, 0\right), over 0≤x≤π20 \le x \le \dfrac{\pi}{2}.

    Why: Complete the square under the root.

  3. So ∫0π/2g(x) dx=12π(π4)2=π332\displaystyle\int_0^{\pi/2} g(x)\,dx = \dfrac{1}{2}\pi\left(\dfrac{\pi}{4}\right)^2 = \dfrac{\pi^3}{32}, and ∫0π/2f(x)g(x) dx=π364\displaystyle\int_0^{\pi/2} f(x)g(x)\,dx = \dfrac{\pi^3}{64}.
  4. 16π3⋅π364=14=0.25\dfrac{16}{\pi^3} \cdot \dfrac{\pi^3}{64} = \dfrac{1}{4} = 0.25.
AnswerAnswer: 0.25
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Electromagnetic induction (motional emf) · +3 / −1
A region in the form of an equilateral triangle (in xx-yy plane) of height LL has a uniform magnetic field B⃗\vec{B} pointing in the +z+z-direction. A conducting loop PQR, in the form of an equilateral triangle of the same height LL, is placed in the xx-yy plane with its vertex P at x=0x = 0 in the orientation shown in the figure. At t=0t = 0, the loop starts entering the region of the magnetic field with a uniform velocity v⃗\vec{v} along the +x+x-direction. The plane of the loop and its orientation remain unchanged throughout its motion. (The figure shows the field triangle with its apex at x=0x = 0 and its base at x=Lx = L; the loop is the mirror image, with vertex P at x=0x = 0 touching the field's apex and its side QR at x=−Lx = -L, so the two triangles meet tip to tip. The loop moves along +x+x, towards the field's base.) Which of the following graph best depicts the variation of the induced emf (EE) in the loop as a function of the distance (xx) starting from x=0x = 0? (Every graph starts at the origin and first goes negative, reaching its lowest value at x=Lx = L. (A): a straight line down to the minimum at x=Lx = L, then a straight line up that crosses zero a little before 3L/23L/2 and reaches, at x=2Lx = 2L, a positive value twice the size of the minimum, then drops to zero. (B): the same shape, but the positive value at 2L2L is much smaller than the minimum, then zero beyond 2L2L. (C): down to the minimum at LL, then a straight line back up to zero at 2L2L, zero after. (D): down to the minimum at LL, then a jump to zero at LL, a straight rise to a positive maximum at 2L2L, then zero.)
  1. (A)Graph (A)
  2. (B)Graph (B)
  3. (C)Graph (C)
  4. (D)Graph (D)

Tests: Find how the overlapping area of two triangles changes with x and turn it into an emf graph.

Show solution
  1. Let the vertex P have moved a distance xx. A slice of either triangle at distance ss from its apex has width 2s3\dfrac{2s}{\sqrt{3}} (an equilateral triangle's width grows as 2tan⁡30∘2\tan 30^\circ per unit height). Write k=2/3k = 2/\sqrt{3}.
  2. 0<x<L0 < x < L: at position ss (from 0 to xx) the field strip has width ksks and the loop strip has width k(x−s)k(x - s). The overlap is A=k∫0xmin⁡(s,x−s) ds=kx24\displaystyle A = k\int_0^x \min(s, x - s)\,ds = \dfrac{kx^2}{4}.

    Why: The overlap is a rhombus made of two small triangles meeting at s = x/2.

  3. L<x<2LL < x < 2L: the overlap runs from s=x−Ls = x - L (side QR) to s=Ls = L (field base): A=k[∫x−Lx/2s ds+∫x/2L(x−s) ds]=k(−3x24+2Lx−L2)A = k\left[\displaystyle\int_{x-L}^{x/2} s\,ds + \int_{x/2}^{L}(x - s)\,ds\right] = k\left(-\dfrac{3x^2}{4} + 2Lx - L^2\right). Check: A(L)=kL2/4A(L) = kL^2/4, A(2L)=0A(2L) = 0.
  4. E=−BdAdt=−BvdAdxE = -B\dfrac{dA}{dt} = -Bv\dfrac{dA}{dx}. For 0<x<L0 < x < L: E=−kBv2xE = -\dfrac{kBv}{2}x, falling linearly to −kBvL2-\dfrac{kBvL}{2} at x=Lx = L. For L<x<2LL < x < 2L: E=kBv(3x2−2L)E = kBv\left(\dfrac{3x}{2} - 2L\right), which is continuous at x=Lx = L, zero at x=4L/3x = 4L/3 and +kBvL+kBvL at x=2Lx = 2L. For x>2Lx > 2L the loop has left the field: E=0E = 0.
  5. So the graph is linear down to −E0-E_0 at LL, linear up through zero at 4L/34L/3 (before 3L/23L/2) to +2E0+2E_0 at 2L2L, then a drop to zero. Only (A) has the peak twice the depth with no jump at LL. (B) has too small a peak, (C) never turns positive, (D) jumps at x=Lx = L.
AnswerAnswer: (A)
Ask about this question
Q2

Physics, Question 2 (3 marks)

Gravitation (circular orbits) · +3 / −1
A particle of mass mm is under the influence of the gravitational field of a body of mass M (≫m)M\ (\gg m). The particle is moving in a circular orbit of radius r0r_0 with time period T0T_0 around the mass MM. Then, the particle is subjected to an additional central force, corresponding to the potential energy Vc(r)=mα/r3V_c(r) = m\alpha/r^3, where α\alpha is a positive constant of suitable dimensions and rr is the distance from the center of the orbit. If the particle moves in the same circular orbit of radius r0r_0 in the combined gravitational potential due to MM and Vc(r)V_c(r), but with a new time period T1T_1, then (T12−T02)/T12(T_1^2 - T_0^2)/T_1^2 is given by [GG is the gravitational constant.]
  1. (A)3αGMr02\dfrac{3\alpha}{GMr_0^2}
  2. (B)α2GMr02\dfrac{\alpha}{2GMr_0^2}
  3. (C)αGMr02\dfrac{\alpha}{GMr_0^2}
  4. (D)2αGMr02\dfrac{2\alpha}{GMr_0^2}

Tests: Add a repulsive central force to a circular orbit and find the change in period.

Show solution
  1. Extra force: Fc=−dVcdr=3mαr4F_c = -\dfrac{dV_c}{dr} = \dfrac{3m\alpha}{r^4}, directed outward (repulsive).
  2. Before: mω02r0=GMmr02m\omega_0^2 r_0 = \dfrac{GMm}{r_0^2}, so ω02=GMr03\omega_0^2 = \dfrac{GM}{r_0^3}.
  3. After: mω12r0=GMmr02−3mαr04m\omega_1^2 r_0 = \dfrac{GMm}{r_0^2} - \dfrac{3m\alpha}{r_0^4}, so ω12=GMr03−3αr05\omega_1^2 = \dfrac{GM}{r_0^3} - \dfrac{3\alpha}{r_0^5}.

    Why: The net inward force supplies the centripetal force.

  4. T12−T02T12=1−T02T12=1−ω12ω02=3α/r05GM/r03=3αGMr02\dfrac{T_1^2 - T_0^2}{T_1^2} = 1 - \dfrac{T_0^2}{T_1^2} = 1 - \dfrac{\omega_1^2}{\omega_0^2} = \dfrac{3\alpha/r_0^5}{GM/r_0^3} = \dfrac{3\alpha}{GMr_0^2}.
AnswerAnswer: (A) 3αGMr02\dfrac{3\alpha}{GMr_0^2}
Ask about this question
Q3

Physics, Question 3 (3 marks)

X-rays (Moseley's law) · +3 / −1
A metal target with atomic number Z=46Z = 46 is bombarded with a high energy electron beam. The emission of X-rays from the target is analyzed. The ratio rr of the wavelengths of the KαK_\alpha-line and the cut-off is found to be r=2r = 2. If the same electron beam bombards another metal target with Z=41Z = 41, the value of rr will be
  1. (A)2.53
  2. (B)1.27
  3. (C)2.24
  4. (D)1.58

Tests: Use Moseley's law and the fact that the cut-off wavelength depends only on the tube voltage.

Show solution
  1. Cut-off wavelength λmin⁡=hceV\lambda_{\min} = \dfrac{hc}{eV} depends only on the accelerating voltage, so it is the same for both targets (same beam).
  2. Moseley: 1λKα=34R(Z−1)2\dfrac{1}{\lambda_{K\alpha}} = \dfrac{3}{4}R(Z - 1)^2, so λKα∝1(Z−1)2\lambda_{K\alpha} \propto \dfrac{1}{(Z - 1)^2}.
  3. r41r46=λKα(41)λKα(46)=(4540)2=1.2656\dfrac{r_{41}}{r_{46}} = \dfrac{\lambda_{K\alpha}(41)}{\lambda_{K\alpha}(46)} = \left(\dfrac{45}{40}\right)^2 = 1.2656.
  4. r41=2×1.2656=2.53r_{41} = 2 \times 1.2656 = 2.53.
AnswerAnswer: (A) 2.53
Ask about this question
Q4

Physics, Question 4 (3 marks)

Torque on a current loop · +3 / −1
A thin stiff insulated metal wire is bent into a circular loop with its two ends extending tangentially from the same point of the loop. The wire loop has mass mm and radius rr and it is in a uniform vertical magnetic field B0B_0, as shown in the figure. Initially, it hangs vertically downwards, because of acceleration due to gravity gg, on two conducting supports at P and Q. When a current II is passed through the loop, the loop turns about the line PQ by an angle θ\theta given by (The figure shows the two straight ends forming a horizontal line PQ resting in hooks on two vertical supports; the circle of radius rr hangs below this line in the vertical plane of the page, touching it at its top point; B0B_0 points vertically up and gg vertically down.)
  1. (A)tan⁡θ=πrIB0/(mg)\tan\theta = \pi r I B_0/(mg)
  2. (B)tan⁡θ=2πrIB0/(mg)\tan\theta = 2\pi r I B_0/(mg)
  3. (C)tan⁡θ=πrIB0/(2mg)\tan\theta = \pi r I B_0/(2mg)
  4. (D)tan⁡θ=mg/(πrIB0)\tan\theta = mg/(\pi r I B_0)

Tests: Balance the magnetic torque on a current loop against gravity's torque about the hinge line.

Show solution
  1. Magnetic moment μ=Iπr2\mu = I\pi r^2, normal to the loop's plane. Hanging vertically, the normal is horizontal and perpendicular to PQ, so it is at 90∘90^\circ to B0⃗\vec{B_0}. The torque μ⃗×B0⃗\vec{\mu} \times \vec{B_0} is along PQ, so the loop turns about PQ.

    Why: The straight ends lie along PQ, so the forces on them have no torque about PQ.

  2. After turning by θ\theta, the normal is tilted θ\theta from the horizontal, so the angle between μ⃗\vec{\mu} and B0⃗\vec{B_0} is 90∘−θ90^\circ - \theta: magnetic torque =Iπr2B0cos⁡θ= I\pi r^2 B_0\cos\theta.
  3. The centre of mass (centre of the circle) is rr below PQ; after turning, gravity's torque about PQ is mg rsin⁡θmg\,r\sin\theta.
  4. Equilibrium: Iπr2B0cos⁡θ=mg rsin⁡θ⇒tan⁡θ=πrIB0mgI\pi r^2 B_0\cos\theta = mg\,r\sin\theta \Rightarrow \tan\theta = \dfrac{\pi r I B_0}{mg}.
AnswerAnswer: (A) tan⁡θ=πrIB0/(mg)\tan\theta = \pi r I B_0/(mg)
Ask about this question

Physics, Section 2: 3 questions, one or more options correct: +4 if all the correct options (and nothing else) are chosen; partial marks +3, +2 or +1 when only some correct options are chosen and no wrong one; 0 if unanswered; −2 in all other cases

Q5

Physics, Question 5 (4 marks)

Electric dipole in a non-uniform field · +4 / −2
A small electric dipole p⃗0\vec{p}_0, having a moment of inertia II about its center, is kept at a distance rr from the center of a spherical shell of radius RR. The surface charge density σ\sigma is uniformly distributed on the spherical shell. The dipole is initially oriented at a small angle θ\theta as shown in the figure. While staying at a distance rr, the dipole is free to rotate about its center. (The figure shows the dipole above the shell, at distance rr from its centre, pointing away from the shell at a small angle θ\theta to the radial line through the centre.) If released from rest, then which of the following statement(s) is(are) correct? [ε0\varepsilon_0 is the permittivity of free space.]
  1. (A)The dipole will undergo small oscillations at any finite value of rr.
  2. (B)The dipole will undergo small oscillations at any finite value of r>Rr > R.
  3. (C)The dipole will undergo small oscillations with an angular frequency of 2σp0ε0I\sqrt{\dfrac{2\sigma p_0}{\varepsilon_0 I}} at r=2Rr = 2R.
  4. (D)The dipole will undergo small oscillations with an angular frequency of σp0100ε0I\sqrt{\dfrac{\sigma p_0}{100\varepsilon_0 I}} at r=10Rr = 10R.

Tests: Use the field of a charged shell inside and outside to find when and how fast a dipole oscillates.

Show solution
  1. Field of the shell: zero inside (r<Rr < R); outside, E=Q4πε0r2=σR2ε0r2E = \dfrac{Q}{4\pi\varepsilon_0 r^2} = \dfrac{\sigma R^2}{\varepsilon_0 r^2}, radially outward (for σ>0\sigma > 0).

    Why: Q = σ · 4πR².

  2. Torque for a small tilt: τ=−p0Esin⁡θ≈−p0Eθ\tau = -p_0E\sin\theta \approx -p_0E\theta, so Iθ¨=−p0EθI\ddot{\theta} = -p_0E\theta and ω=p0E/I\omega = \sqrt{p_0E/I}. The dipole points outward along the field, the stable direction.
  3. (A) False. Inside the shell E=0E = 0: no torque, no oscillation.
  4. (B) True. For every r>Rr > R there is a radial field and a restoring torque.
  5. (C) False. At r=2Rr = 2R: E=σ4ε0E = \dfrac{\sigma}{4\varepsilon_0}, ω=σp04ε0I\omega = \sqrt{\dfrac{\sigma p_0}{4\varepsilon_0 I}}, not 2σp0/(ε0I)\sqrt{2\sigma p_0/(\varepsilon_0 I)}.
  6. (D) True. At r=10Rr = 10R: E=σ100ε0E = \dfrac{\sigma}{100\varepsilon_0}, ω=σp0100ε0I\omega = \sqrt{\dfrac{\sigma p_0}{100\varepsilon_0 I}}.
AnswerAnswer: (B), (D)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Fluids (buoyancy and viscosity) · +4 / −2
A table tennis ball has radius (3/2)×10−2(3/2) \times 10^{-2} m and mass (22/7)×10−3(22/7) \times 10^{-3} kg. It is slowly pushed down into a swimming pool to a depth of d=0.7d = 0.7 m below the water surface and then released from rest. It emerges from the water surface at speed vv, without getting wet, and rises up to a height HH. Which of the following option(s) is(are) correct? [Given: π=22/7\pi = 22/7, g=10 m s−2g = 10\ \mathrm{m\,s^{-2}}, density of water =1×103 kg m−3= 1 \times 10^3\ \mathrm{kg\,m^{-3}}, viscosity of water =1×10−3= 1 \times 10^{-3} Pa-s.]
  1. (A)The work done in pushing the ball to the depth dd is 0.077 J.
  2. (B)If we neglect the viscous force in water, then the speed v=7v = 7 m/s.
  3. (C)If we neglect the viscous force in water, then the height H=1.4H = 1.4 m.
  4. (D)The ratio of the magnitudes of the net force excluding the viscous force to the maximum viscous force in water is 500/9500/9.

Tests: Combine buoyancy, work-energy and Stokes' law for a light ball released under water.

Show solution
  1. Volume V=43⋅227⋅(1.5×10−2)3=997×10−6 m3V = \dfrac{4}{3}\cdot\dfrac{22}{7}\cdot(1.5 \times 10^{-2})^3 = \dfrac{99}{7} \times 10^{-6}\ \mathrm{m^3}. Buoyancy =103⋅997×10−6⋅10=0.997= 10^3 \cdot \dfrac{99}{7} \times 10^{-6} \cdot 10 = \dfrac{0.99}{7} N; weight =227×10−3⋅10=0.227= \dfrac{22}{7} \times 10^{-3} \cdot 10 = \dfrac{0.22}{7} N. Net upward force F=0.777=0.11F = \dfrac{0.77}{7} = 0.11 N.
  2. (A) True. Pushing slowly, the push balances FF: W=Fd=0.11×0.7=0.077W = F d = 0.11 \times 0.7 = 0.077 J.

    Why: The question treats the ball as fully immersed from the surface down.

  3. (B) True. Without viscosity, a=F/m=0.11(22/7)×10−3=35 m s−2a = F/m = \dfrac{0.11}{(22/7) \times 10^{-3}} = 35\ \mathrm{m\,s^{-2}}, so v2=2ad=2×35×0.7=49v^2 = 2ad = 2 \times 35 \times 0.7 = 49, v=7v = 7 m/s. (Equivalently, the 0.077 J of work becomes kinetic energy.)
  4. (C) False. In air, H=v22g=4920=2.45H = \dfrac{v^2}{2g} = \dfrac{49}{20} = 2.45 m, not 1.4 m.
  5. (D) True. The viscous (Stokes) force is largest at the largest speed, 7 m/s: Fv=6πηrv=6⋅227⋅10−3⋅1.5×10−2⋅7=1.98×10−3F_v = 6\pi\eta r v = 6 \cdot \dfrac{22}{7} \cdot 10^{-3} \cdot 1.5 \times 10^{-2} \cdot 7 = 1.98 \times 10^{-3} N. Ratio 0.111.98×10−3=5009\dfrac{0.11}{1.98 \times 10^{-3}} = \dfrac{500}{9}.

    Why: The viscous force is small, so the speed is close to the no-viscosity value.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Motion of a charge in a magnetic field (mass spectrometer) · +4 / −2
A positive, singly ionized atom of mass number AMA_{\mathrm{M}} is accelerated from rest by the voltage 192 V. Thereafter, it enters a rectangular region of width ww with magnetic field B⃗0=0.1k^\vec{B}_0 = 0.1\hat{k} Tesla, as shown in the figure. The ion finally hits a detector at the distance xx below its starting trajectory. [Given: Mass of neutron/proton =(5/3)×10−27= (5/3) \times 10^{-27} kg, charge of the electron =1.6×10−19= 1.6 \times 10^{-19} C.] (The figure shows the ion moving along +y+y and entering the field region at right angles to its left face; the region has width ww along yy and B⃗0\vec{B}_0 points out of the page (+z+z); xx is measured downward. A vertical detector stands just to the left of the field region, below the incoming line, spanning distances x0x_0 to x1x_1 below it; the ion comes back out of the left face and hits the detector at distance xx below the incoming line.) Which of the following option(s) is(are) correct?
  1. (A)The value of xx for H+H^+ ion is 4 cm.
  2. (B)The value of xx for an ion with AM=144A_{\mathrm{M}} = 144 is 48 cm.
  3. (C)For detecting ions with 1≤AM≤1961 \le A_{\mathrm{M}} \le 196, the minimum height (x1−x0)(x_1 - x_0) of the detector is 55 cm.
  4. (D)The minimum width ww of the region of the magnetic field for detecting ions with AM=196A_{\mathrm{M}} = 196 is 56 cm.

Tests: Find the radius of an ion's circular path after acceleration and use it to size a mass-spectrometer detector.

Show solution
  1. Force qv⃗×B⃗=qvB(j^×k^)=qvB i^q\vec{v} \times \vec{B} = qvB(\hat{j} \times \hat{k}) = qvB\,\hat{i}: the ion bends towards +x+x (down), goes round a semicircle and leaves the left face moving along −y-y, a distance x=2Rx = 2R below where it entered.
  2. R=mvqB=2mqVqB=1B2mVqR = \dfrac{mv}{qB} = \dfrac{\sqrt{2mqV}}{qB} = \dfrac{1}{B}\sqrt{\dfrac{2mV}{q}}. For H+H^+: 2mVq=2⋅(5/3)×10−27⋅1921.6×10−19=4×10−6\dfrac{2mV}{q} = \dfrac{2 \cdot (5/3) \times 10^{-27} \cdot 192}{1.6 \times 10^{-19}} = 4 \times 10^{-6}, so R=2×10−30.1=2R = \dfrac{2 \times 10^{-3}}{0.1} = 2 cm. In general R=2AMR = 2\sqrt{A_{\mathrm{M}}} cm.
  3. (A) True. x=2R=4x = 2R = 4 cm for H+H^+.
  4. (B) True. AM=144A_{\mathrm{M}} = 144: R=2×12=24R = 2 \times 12 = 24 cm, x=48x = 48 cm.
  5. (C) False. xx runs from 4 cm (AM=1A_{\mathrm{M}} = 1) to 4196=564\sqrt{196} = 56 cm (AM=196A_{\mathrm{M}} = 196): the detector must span 56−4=5256 - 4 = 52 cm, not 55 cm.
  6. (D) False. For AM=196A_{\mathrm{M}} = 196, R=28R = 28 cm. The semicircle reaches a depth RR into the field, so w≥28w \ge 28 cm is enough; 56 cm is the diameter, not the minimum width.
AnswerAnswer: (A), (B)
Ask about this question

Physics, Section 3: 6 questions, non-negative integer answer: +4 if correct, 0 otherwise

Q8

Physics, Question 8 (4 marks)

Errors in measurement · +4
The dimensions of a cone are measured using a scale with a least count of 2 mm. The diameter of the base and the height are both measured to be 20.0 cm. The maximum percentage error in the determination of the volume is ______.

Tests: Propagate the least-count error through the volume formula of a cone.

Show solution
  1. V=13π(D2)2h=π12D2hV = \dfrac{1}{3}\pi\left(\dfrac{D}{2}\right)^2 h = \dfrac{\pi}{12}D^2h.
  2. Maximum relative error: ΔVV=2ΔDD+Δhh\dfrac{\Delta V}{V} = 2\dfrac{\Delta D}{D} + \dfrac{\Delta h}{h}.

    Why: Relative errors add, each multiplied by its power.

  3. With ΔD=Δh=0.2\Delta D = \Delta h = 0.2 cm (the least count): ΔVV=2⋅0.220+0.220=0.02+0.01=0.03\dfrac{\Delta V}{V} = 2 \cdot \dfrac{0.2}{20} + \dfrac{0.2}{20} = 0.02 + 0.01 = 0.03.
  4. Percentage error =3%= 3\%.
AnswerAnswer: 3
Ask about this question
Q9

Physics, Question 9 (4 marks)

Projectile motion (relative motion) · +4
A ball is thrown from the location (x0,y0)=(0,0)(x_0, y_0) = (0, 0) of a horizontal playground with an initial speed v0v_0 at an angle θ0\theta_0 from the +x+x-direction. The ball is to be hit by a stone, which is thrown at the same time from the location (x1,y1)=(L,0)(x_1, y_1) = (L, 0). The stone is thrown at an angle (180−θ1)(180 - \theta_1) from the +x+x-direction with a suitable initial speed. For a fixed v0v_0, when (θ0,θ1)=(45∘,45∘)(\theta_0, \theta_1) = (45^\circ, 45^\circ), the stone hits the ball after time T1T_1, and when (θ0,θ1)=(60∘,30∘)(\theta_0, \theta_1) = (60^\circ, 30^\circ), it hits the ball after time T2T_2. In such a case, (T1/T2)2(T_1/T_2)^2 is ______.

Tests: Use relative motion of two projectiles to find when they meet.

Show solution
  1. Both fall with the same gg, so relative to the ball the stone moves in a straight line at constant velocity. To meet, the relative velocity must point along the line joining them, which is horizontal: the vertical components must be equal, v0sin⁡θ0=usin⁡θ1v_0\sin\theta_0 = u\sin\theta_1.
  2. They then close the gap LL at the relative speed v0cos⁡θ0+ucos⁡θ1v_0\cos\theta_0 + u\cos\theta_1: T=Lv0cos⁡θ0+ucos⁡θ1T = \dfrac{L}{v_0\cos\theta_0 + u\cos\theta_1}.
  3. (45∘,45∘)(45^\circ, 45^\circ): u=v0u = v_0, so T1=L2 v0T_1 = \dfrac{L}{\sqrt{2}\,v_0}.
  4. (60∘,30∘)(60^\circ, 30^\circ): u⋅12=v032⇒u=3v0u\cdot\dfrac{1}{2} = v_0\dfrac{\sqrt{3}}{2} \Rightarrow u = \sqrt{3}v_0; closing speed v02+3v0⋅32=2v0\dfrac{v_0}{2} + \sqrt{3}v_0\cdot\dfrac{\sqrt{3}}{2} = 2v_0, so T2=L2v0T_2 = \dfrac{L}{2v_0}.
  5. (T1T2)2=(22)2=2\left(\dfrac{T_1}{T_2}\right)^2 = \left(\dfrac{2}{\sqrt{2}}\right)^2 = 2.
AnswerAnswer: 2
Ask about this question
Q10

Physics, Question 10 (4 marks)

Gauss's law (electric flux) · +4
A charge is kept at the central point P of a cylindrical region. The two edges subtend a half-angle θ\theta at P, as shown in the figure. When θ=30∘\theta = 30^\circ, then the electric flux through the curved surface of the cylinder is Φ\Phi. If θ=60∘\theta = 60^\circ, then the electric flux through the curved surface becomes Φ/n\Phi/\sqrt{n}, where the value of nn is ______. (The figure shows a cylinder with P at its centre on the axis; lines from P to the rim of the top face and of the bottom face each make the angle θ\theta with the axis.)

Tests: Use solid angles and Gauss's law to split a point charge's flux between the faces of a cylinder.

Show solution
  1. Each flat face is seen from P under a cone of half-angle θ\theta, solid angle Ω=2π(1−cos⁡θ)\Omega = 2\pi(1 - \cos\theta). Flux through one face =qε0⋅Ω4π=q2ε0(1−cos⁡θ)= \dfrac{q}{\varepsilon_0}\cdot\dfrac{\Omega}{4\pi} = \dfrac{q}{2\varepsilon_0}(1 - \cos\theta).
  2. Curved surface: Φcurved=qε0−2⋅q2ε0(1−cos⁡θ)=qcos⁡θε0\Phi_{\text{curved}} = \dfrac{q}{\varepsilon_0} - 2\cdot\dfrac{q}{2\varepsilon_0}(1 - \cos\theta) = \dfrac{q\cos\theta}{\varepsilon_0}.

    Why: Total flux through the closed cylinder is q/ε0 (Gauss's law).

  3. θ=30∘\theta = 30^\circ: Φ=32qε0\Phi = \dfrac{\sqrt{3}}{2}\dfrac{q}{\varepsilon_0}. θ=60∘\theta = 60^\circ: 12qε0=Φ3\dfrac{1}{2}\dfrac{q}{\varepsilon_0} = \dfrac{\Phi}{\sqrt{3}}.
  4. So n=3n = 3.
AnswerAnswer: 3
Ask about this question
Q11

Physics, Question 11 (4 marks)

Refraction through a prism (minimum deviation) · +4
Two equilateral-triangular prisms P1P_1 and P2P_2 are kept with their sides parallel to each other, in vacuum, as shown in the figure. A light ray enters prism P1P_1 at an angle of incidence θ\theta such that the outgoing ray undergoes minimum deviation in prism P2P_2. If the respective refractive indices of P1P_1 and P2P_2 are 32\sqrt{\dfrac{3}{2}} and 3\sqrt{3}, then θ=sin⁡−1[32sin⁡(πβ)]\theta = \sin^{-1}\left[\sqrt{\dfrac{3}{2}}\sin\left(\dfrac{\pi}{\beta}\right)\right], where the value of β\beta is ______. (The figure shows P1P_1 with its apex up and P2P_2 to its right with its apex down; the right face of P1P_1 is parallel to the left face of P2P_2 with a narrow gap. The ray enters the left face of P1P_1 at angle θ\theta to the normal.)

Tests: Trace a ray back through two prisms using minimum deviation and r1 + r2 = A.

Show solution
  1. Minimum deviation in P2P_2 (prism angle 60∘60^\circ): the ray inside is symmetric, refraction angle 30∘30^\circ at each face. Incidence on P2P_2: sin⁡i=3sin⁡30∘=32\sin i = \sqrt{3}\sin 30^\circ = \dfrac{\sqrt{3}}{2}, so i=60∘i = 60^\circ.
  2. The facing faces are parallel, so the ray leaving P1P_1 makes 60∘60^\circ with the normal of P1P_1's exit face too.

    Why: The ray crosses the gap in a straight line; both faces share the same normal.

  3. Inside P1P_1 at the exit face: 32sin⁡r2=sin⁡60∘⇒sin⁡r2=3223=12\sqrt{\tfrac{3}{2}}\sin r_2 = \sin 60^\circ \Rightarrow \sin r_2 = \dfrac{\sqrt{3}}{2}\sqrt{\dfrac{2}{3}} = \dfrac{1}{\sqrt{2}}, so r2=45∘r_2 = 45^\circ.
  4. r1+r2=A=60∘⇒r1=15∘r_1 + r_2 = A = 60^\circ \Rightarrow r_1 = 15^\circ. At entry, sin⁡θ=32sin⁡15∘=32sin⁡π12\sin\theta = \sqrt{\tfrac{3}{2}}\sin 15^\circ = \sqrt{\tfrac{3}{2}}\sin\dfrac{\pi}{12}.
  5. So β=12\beta = 12.
AnswerAnswer: 12
Ask about this question
Q12

Physics, Question 12 (4 marks)

Electric potential (line charge and charged shell) · +4
An infinitely long thin wire, having a uniform charge density per unit length of 5 nC/m, is passing through a spherical shell of radius 1 m, as shown in the figure. A 10 nC charge is distributed uniformly over the spherical shell. If the configuration of the charges remains static, the magnitude of the potential difference between points P and R, in Volt, is ______. [Given: In SI units 14πε0=9×109\dfrac{1}{4\pi\varepsilon_0} = 9 \times 10^9, ln⁡2=0.7\ln 2 = 0.7. Ignore the area pierced by the wire.] (The figure shows the wire along a vertical diameter of the shell. P and R lie on the horizontal line through the centre, perpendicular to the wire: P is 0.5 m from the wire, inside the shell, and R is 2 m from the wire, outside the shell.)

Tests: Superpose the potentials of an infinite line charge and a charged shell.

Show solution
  1. Superpose the wire and the shell. Both P and R are on a line through the centre perpendicular to the wire, so their distances from the wire equal their distances from the centre: 0.5 m and 2 m.
  2. Wire: VP−VR=λ2πε0ln⁡rRrP=2⋅9×109⋅5×10−9ln⁡4=90×1.4=126V_P - V_R = \dfrac{\lambda}{2\pi\varepsilon_0}\ln\dfrac{r_R}{r_P} = 2 \cdot 9 \times 10^9 \cdot 5 \times 10^{-9}\ln 4 = 90 \times 1.4 = 126 V.
  3. Shell: inside, V=kQR=9×109⋅10×10−91=90V = \dfrac{kQ}{R} = \dfrac{9 \times 10^9 \cdot 10 \times 10^{-9}}{1} = 90 V; at R, kQ2=45\dfrac{kQ}{2} = 45 V. Difference 45 V.
  4. Both contributions make P higher than R: ∣VP−VR∣=126+45=171|V_P - V_R| = 126 + 45 = 171 V.
AnswerAnswer: 171
Ask about this question
Q13

Physics, Question 13 (4 marks)

Surface tension (soap bubble) · +4
A spherical soap bubble inside an air chamber at pressure P0=105P_0 = 10^5 Pa has a certain radius so that the excess pressure inside the bubble is ΔP=144\Delta P = 144 Pa. Now, the chamber pressure is reduced to 8P0/278P_0/27 so that the bubble radius and its excess pressure change. In this process, all the temperatures remain unchanged. Assume air to be an ideal gas and the excess pressure ΔP\Delta P in both the cases to be much smaller than the chamber pressure. The new excess pressure ΔP\Delta P in Pa is ______.

Tests: Combine Boyle's law for the trapped air with the excess pressure of a soap bubble.

Show solution
  1. Excess pressure in a soap bubble: ΔP=4Tr\Delta P = \dfrac{4T}{r}, so ΔP∝1/r\Delta P \propto 1/r.
  2. Since ΔP≪\Delta P \ll chamber pressure, the air inside is at about the chamber pressure: P0P_0 before, 8P027\dfrac{8P_0}{27} after.
  3. Isothermal: P0⋅r3=8P027r′3⇒r′=32rP_0 \cdot r^3 = \dfrac{8P_0}{27}r'^3 \Rightarrow r' = \dfrac{3}{2}r.
  4. ΔP′=144×23=96\Delta P' = 144 \times \dfrac{2}{3} = 96 Pa.
AnswerAnswer: 96
Ask about this question

Physics, Section 4: 2 paragraphs, 2 questions each, numerical value answer (truncate or round to two decimal places): +3 if correct, 0 otherwise

Q14

Physics, Question 14 (3 marks)

Young's double slit experiment · +3
Paragraph: In a Young's double slit experiment, each of the two slits A and B, as shown in the figure, are oscillating about their fixed center and with a mean separation of 0.8 mm. The distance between the slits at time tt is given by d=(0.8+0.04sin⁡ωt)d = (0.8 + 0.04\sin\omega t) mm, where ω=0.08 rad s−1\omega = 0.08\ \mathrm{rad\,s^{-1}}. The distance of the screen from the slits is 1 m and the wavelength of the light used to illuminate the slits is 6000 Å. The interference pattern on the screen changes with time, while the central bright fringe (zeroth fringe) remains fixed at point O. (The figure shows parallel light falling on a barrier with slit B above and slit A below, separation dd; the screen is 1 m away and O is on the central line through the midpoint of the slits.) Question: The 8th bright fringe above the point O oscillates with time between two extreme positions. The separation between these two extreme positions, in micrometer (μ\mum), is ______.

Tests: Find how far a bright fringe moves when the slit separation oscillates.

Show solution
  1. Position of the 8th bright fringe: y8=8λDdy_8 = \dfrac{8\lambda D}{d}, with 8λD=8×6×10−7×1=4.8×10−6 m28\lambda D = 8 \times 6 \times 10^{-7} \times 1 = 4.8 \times 10^{-6}\ \mathrm{m^2}.
  2. dd swings between 0.760.76 mm and 0.840.84 mm, so y8y_8 swings between 4.8×10−60.84×10−3\dfrac{4.8 \times 10^{-6}}{0.84 \times 10^{-3}} and 4.8×10−60.76×10−3\dfrac{4.8 \times 10^{-6}}{0.76 \times 10^{-3}}.

    Why: The fringe is farthest from O when the slits are closest.

  3. ymax⁡=6.3158y_{\max} = 6.3158 mm, ymin⁡=5.7143y_{\min} = 5.7143 mm.
  4. Separation =6.3158−5.7143=0.6015= 6.3158 - 5.7143 = 0.6015 mm =601.50 μ= 601.50\ \mum.
AnswerAnswer: 601.50
Ask about this question
Q15

Physics, Question 15 (3 marks)

Young's double slit experiment · +3
Paragraph: In a Young's double slit experiment, each of the two slits A and B, as shown in the figure, are oscillating about their fixed center and with a mean separation of 0.8 mm. The distance between the slits at time tt is given by d=(0.8+0.04sin⁡ωt)d = (0.8 + 0.04\sin\omega t) mm, where ω=0.08 rad s−1\omega = 0.08\ \mathrm{rad\,s^{-1}}. The distance of the screen from the slits is 1 m and the wavelength of the light used to illuminate the slits is 6000 Å. The interference pattern on the screen changes with time, while the central bright fringe (zeroth fringe) remains fixed at point O. (The figure shows parallel light falling on a barrier with slit B above and slit A below, separation dd; the screen is 1 m away and O is on the central line through the midpoint of the slits.) Question: The maximum speed in μ\mum/s at which the 8th bright fringe will move is ______.

Tests: Differentiate the fringe position to get its speed and find where that speed is largest.

Show solution
  1. y8=8λDdy_8 = \dfrac{8\lambda D}{d}, so dy8dt=−8λDd2dddt\dfrac{dy_8}{dt} = -\dfrac{8\lambda D}{d^2}\dfrac{dd}{dt}, with dddt=0.04ωcos⁡ωt\dfrac{dd}{dt} = 0.04\omega\cos\omega t mm/s.
  2. With dd in mm: ∣v∣=4.8×10−6 m2×0.04×10−3×0.08 ∣cos⁡ωt∣d2×10−6=15.36 ∣cos⁡ωt∣(0.8+0.04sin⁡ωt)2 μm/s|v| = \dfrac{4.8 \times 10^{-6}\ \mathrm{m^2} \times 0.04 \times 10^{-3} \times 0.08\,|\cos\omega t|}{d^2 \times 10^{-6}} = \dfrac{15.36\,|\cos\omega t|}{(0.8 + 0.04\sin\omega t)^2}\ \mu\mathrm{m/s}.
  3. At the mean separation (sin⁡ωt=0\sin\omega t = 0): v=15.360.64=24.00 μv = \dfrac{15.36}{0.64} = 24.00\ \mum/s. This is the value the published key gives (treating d≈0.8d \approx 0.8 mm in the denominator).
  4. The true maximum is a little earlier. With s=sin⁡ωts = \sin\omega t, maximise 1−s2(0.8+0.04s)4\dfrac{1 - s^2}{(0.8 + 0.04s)^4}: setting the derivative to zero gives s2−20s−2=0s^2 - 20s - 2 = 0, s=10−102=−0.0995s = 10 - \sqrt{102} = -0.0995.

    Why: A slightly smaller d raises 1/d² more than the cosine falls.

  5. There cos⁡ωt=0.99504\cos\omega t = 0.99504 and d=0.79602d = 0.79602 mm: vmax⁡=15.36×0.995040.63365=24.12 μv_{\max} = \dfrac{15.36 \times 0.99504}{0.63365} = 24.12\ \mum/s.
AnswerAnswer: 24.12 (24.00 if dd is taken as 0.8 mm)
Ask about this question
Q16

Physics, Question 16 (3 marks)

Elastic collisions and spring-mass systems · +3
Paragraph: Two particles, 1 and 2, each of mass mm, are connected by a massless spring, and are on a horizontal frictionless plane, as shown in the figure. Initially, the two particles, with their center of mass at x0x_0, are oscillating with amplitude aa and angular frequency ω\omega. Thus, their positions at time tt are given by x1(t)=(x0+d)+asin⁡ωtx_1(t) = (x_0 + d) + a\sin\omega t and x2(t)=(x0−d)−asin⁡ωtx_2(t) = (x_0 - d) - a\sin\omega t, respectively, where d>2ad > 2a. Particle 3 of mass mm moves towards this system with speed u0=aω/2u_0 = a\omega/2, and undergoes instantaneous elastic collision with particle 2, at time t0t_0. Finally, particles 1 and 2 acquire a center of mass speed vcmv_{\mathrm{cm}} and oscillate with amplitude bb and the same angular frequency ω\omega. (The figure shows, from left to right, particle 3 moving to the right with speed u0u_0, then particle 2, the spring, and particle 1; x0x_0 marks the middle of the spring.) Question: If the collision occurs at time t0=0t_0 = 0, the value of vcm/(aω)v_{\mathrm{cm}}/(a\omega) will be ______.

Tests: Use velocity exchange in an equal-mass elastic collision to find the new centre-of-mass speed.

Show solution
  1. Velocities at t=0t = 0: x˙1=aωcos⁡0=+aω\dot{x}_1 = a\omega\cos 0 = +a\omega, x˙2=−aωcos⁡0=−aω\dot{x}_2 = -a\omega\cos 0 = -a\omega (particle 2 moving left, towards 3). Particle 3 has +aω/2+a\omega/2.
  2. Head-on elastic collision of equal masses: they exchange velocities. Particle 2 now has +aω/2+a\omega/2 (particle 3 bounces back with −aω-a\omega).

    Why: The spring cannot act during an instantaneous collision, so particle 2 behaves as a free particle.

  3. vcm=aω+aω/22=3aω4v_{\mathrm{cm}} = \dfrac{a\omega + a\omega/2}{2} = \dfrac{3a\omega}{4}.
  4. vcmaω=0.75\dfrac{v_{\mathrm{cm}}}{a\omega} = 0.75.
AnswerAnswer: 0.75
Ask about this question
Q17

Physics, Question 17 (3 marks)

Elastic collisions and spring-mass systems · +3
Paragraph: Two particles, 1 and 2, each of mass mm, are connected by a massless spring, and are on a horizontal frictionless plane, as shown in the figure. Initially, the two particles, with their center of mass at x0x_0, are oscillating with amplitude aa and angular frequency ω\omega. Thus, their positions at time tt are given by x1(t)=(x0+d)+asin⁡ωtx_1(t) = (x_0 + d) + a\sin\omega t and x2(t)=(x0−d)−asin⁡ωtx_2(t) = (x_0 - d) - a\sin\omega t, respectively, where d>2ad > 2a. Particle 3 of mass mm moves towards this system with speed u0=aω/2u_0 = a\omega/2, and undergoes instantaneous elastic collision with particle 2, at time t0t_0. Finally, particles 1 and 2 acquire a center of mass speed vcmv_{\mathrm{cm}} and oscillate with amplitude bb and the same angular frequency ω\omega. (The figure shows, from left to right, particle 3 moving to the right with speed u0u_0, then particle 2, the spring, and particle 1; x0x_0 marks the middle of the spring.) Question: If the collision occurs at time t0=π/(2ω)t_0 = \pi/(2\omega), then the value of 4b2/a24b^2/a^2 will be ______.

Tests: Find the new oscillation amplitude from position and velocity relative to the centre of mass after a collision.

Show solution
  1. At t0=π2ωt_0 = \dfrac{\pi}{2\omega}: sin⁡ωt0=1\sin\omega t_0 = 1, cos⁡ωt0=0\cos\omega t_0 = 0. Both particles are at rest at their extreme positions, each displaced by aa from its equilibrium (spring at maximum stretch).
  2. Elastic collision with equal masses: particle 2 gets +aω/2+a\omega/2, particle 1 still at rest. So vcm=aω4v_{\mathrm{cm}} = \dfrac{a\omega}{4}.
  3. In the centre-of-mass frame: particle 2 has velocity +aω4+\dfrac{a\omega}{4} and particle 1 has −aω4-\dfrac{a\omega}{4}, each still displaced by aa from its equilibrium position (relative to the CM).

    Why: The collision is instantaneous, so positions do not change.

  4. Each particle oscillates with angular frequency ω\omega about its equilibrium: b2=a2+(aω/4ω)2=a2(1+116)=1716a2b^2 = a^2 + \left(\dfrac{a\omega/4}{\omega}\right)^2 = a^2\left(1 + \dfrac{1}{16}\right) = \dfrac{17}{16}a^2.
  5. 4b2a2=174=4.25\dfrac{4b^2}{a^2} = \dfrac{17}{4} = 4.25.
AnswerAnswer: 4.25
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Atomic structure (Bohr model) · +3 / −1
According to Bohr’s model, the highest kinetic energy is associated with the electron in the
  1. (A)first orbit of H atom
  2. (B)first orbit of He+\mathrm{He^+}
  3. (C)second orbit of He+\mathrm{He^+}
  4. (D)second orbit of Li2+\mathrm{Li^{2+}}

Tests: Compare electron kinetic energies across hydrogen-like species using Z²/n².

Show solution
  1. In Bohr's model the kinetic energy equals minus the total energy: KE=13.6 Z2n2\mathrm{KE} = 13.6\,\dfrac{Z^2}{n^2} eV.

    Why: For a 1/r force, KE = −E (virial theorem).

  2. H, n=1n = 1: 13.6×11=13.613.6 \times \dfrac{1}{1} = 13.6 eV. He+\mathrm{He^+}, n=1n = 1: 13.6×41=54.413.6 \times \dfrac{4}{1} = 54.4 eV.
  3. He+\mathrm{He^+}, n=2n = 2: 13.6×44=13.613.6 \times \dfrac{4}{4} = 13.6 eV. Li2+\mathrm{Li^{2+}}, n=2n = 2: 13.6×94=30.613.6 \times \dfrac{9}{4} = 30.6 eV.
  4. The largest Z2/n2Z^2/n^2 is 4, for the first orbit of He+\mathrm{He^+}: option (B).
AnswerAnswer: (B) first orbit of He+\mathrm{He^+} (54.4 eV)
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Solid state (non-stoichiometric defects) · +3 / −1
In a metal deficient oxide sample, MXY2O4\mathrm{M_XY_2O_4} (M and Y are metals), M is present in both +2 and +3 oxidation states and Y is in +3 oxidation state. If the fraction of M2+\mathrm{M^{2+}} ions present in M is 13\dfrac{1}{3}, the value of X is _____.
  1. (A)0.25
  2. (B)0.33
  3. (C)0.67
  4. (D)0.75

Tests: Use charge neutrality with a mixed-valence metal to find a non-stoichiometric formula.

Show solution
  1. Charge balance: O4\mathrm{O_4} carries −8-8 and Y2\mathrm{Y_2} (each +3) carries +6+6, so the XX atoms of M must carry a total of +2+2.
  2. Average charge on M: 13(+2)+23(+3)=2+63=83\dfrac{1}{3}(+2) + \dfrac{2}{3}(+3) = \dfrac{2 + 6}{3} = \dfrac{8}{3}.
  3. X×83=2⇒X=68=0.75X \times \dfrac{8}{3} = 2 \Rightarrow X = \dfrac{6}{8} = 0.75.

    Why: X below 1 is exactly what 'metal deficient' means: some M sites are empty.

AnswerAnswer: (D) X=0.75X = 0.75
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Hydrocarbons (aromatisation, free-radical addition) · +3 / −1
In the following reaction sequence, the major product Q is (The scheme shows: L-Glucose treated with i) HI, Δ\Delta; ii) Cr2O3\mathrm{Cr_2O_3}, 775 K, 10–20 atm gives P; P with Cl2\mathrm{Cl_2} (excess) under UV light gives Q.)
  1. (A)hexachlorobenzene, C6Cl6\mathrm{C_6Cl_6} (a benzene ring with Cl on all six carbons)
  2. (B)1,2,3,5-tetrachlorobenzene (a benzene ring with Cl on four carbons)
  3. (C)1,4-dichlorobenzene (p-dichlorobenzene)
  4. (D)1,2,3,4,5,6-hexachlorocyclohexane, C6H6Cl6\mathrm{C_6H_6Cl_6} (a saturated six-membered ring with one Cl on each carbon)

Tests: Chain glucose to n-hexane, benzene and the UV chlorination product.

Show solution
  1. Prolonged heating of glucose (D or L, the configuration does not matter here) with HI reduces all the OH groups and the CHO: the straight six-carbon chain gives n-hexane, CH3(CH2)4CH3\mathrm{CH_3(CH_2)_4CH_3}.

    Why: This is the classic proof that glucose has an unbranched chain of six carbons.

  2. n-Hexane over Cr2O3\mathrm{Cr_2O_3} at 775 K and 10–20 atm undergoes aromatisation (cyclisation and dehydrogenation): P = benzene, C6H6\mathrm{C_6H_6}.
  3. Benzene with excess Cl2\mathrm{Cl_2} in UV light undergoes free-radical addition, not substitution: three molecules of Cl2\mathrm{Cl_2} add across the ring.

    Why: Without a Lewis acid (FeCl3) there is no electrophilic substitution; UV makes Cl radicals that add.

  4. Q = 1,2,3,4,5,6-hexachlorocyclohexane, C6H6Cl6\mathrm{C_6H_6Cl_6} (BHC, gammexane): option (D).
AnswerAnswer: (D) hexachlorocyclohexane, C6H6Cl6\mathrm{C_6H_6Cl_6}
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

p-Block elements (phosphorus halides) · +3 / −1
The species formed on fluorination of phosphorus pentachloride in a polar organic solvent are
  1. (A)[PF4]+[PF6]−\mathrm{[PF_4]^+[PF_6]^-} and [PCl4]+[PF6]−\mathrm{[PCl_4]^+[PF_6]^-}
  2. (B)[PCl4]+[PCl4F2]−\mathrm{[PCl_4]^+[PCl_4F_2]^-} and [PCl4]+[PF6]−\mathrm{[PCl_4]^+[PF_6]^-}
  3. (C)PF3\mathrm{PF_3} and PCl3\mathrm{PCl_3}
  4. (D)PF5\mathrm{PF_5} and PCl3\mathrm{PCl_3}

Tests: Predict how ionised PCl5 reacts with a fluorinating agent in a polar solvent.

Show solution
  1. In a polar solvent PCl5\mathrm{PCl_5} ionises: 2PCl5⇌[PCl4]++[PCl6]−\mathrm{2PCl_5 \rightleftharpoons [PCl_4]^+ + [PCl_6]^-} (tetrahedral cation, octahedral anion).
  2. Fluorination replaces chloride by fluoride in the anion, which is the site that holds the halide ions; the [PCl4]+\mathrm{[PCl_4]^+} cation stays.

    Why: F is smaller and more electronegative, so it strongly favours the six-coordinate anion of phosphorus.

  3. Partial fluorination gives [PCl4]+[PCl4F2]−\mathrm{[PCl_4]^+[PCl_4F_2]^-}; complete fluorination of the anion gives [PCl4]+[PF6]−\mathrm{[PCl_4]^+[PF_6]^-}. These are option (B).
  4. (A) needs [PF4]+\mathrm{[PF_4]^+}, which is not formed: PF5\mathrm{PF_5} is a molecular fluoride acceptor, not an ionising one. (C) and (D) involve reduction of P(V) to P(III), which fluorination does not do.
AnswerAnswer: (B) [PCl4]+[PCl4F2]−\mathrm{[PCl_4]^+[PCl_4F_2]^-} and [PCl4]+[PF6]−\mathrm{[PCl_4]^+[PF_6]^-}
Ask about this question

Chemistry, Section 2: 3 questions, one or more options correct: +4 only if (all) the correct option(s) are chosen; +3 if all four are correct but only three are chosen; +2 if three or more are correct but only two are chosen, both correct; +1 if two or more are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q5

Chemistry, Question 5 (4 marks)

Electrochemistry (fuel cells) · +4 / −2
An aqueous solution of hydrazine (N2H4\mathrm{N_2H_4}) is electrochemically oxidized by O2\mathrm{O_2}, thereby releasing chemical energy in the form of electrical energy. One of the products generated from the electrochemical reaction is N2(g)\mathrm{N_2(g)}. Choose the correct statement(s) about the above process
  1. (A)OH−\mathrm{OH^-} ions react with N2H4\mathrm{N_2H_4} at the anode to form N2(g)\mathrm{N_2(g)} and water, releasing 4 electrons to the anode.
  2. (B)At the cathode, N2H4\mathrm{N_2H_4} breaks to N2(g)\mathrm{N_2(g)} and nascent hydrogen released at the electrode reacts with oxygen to form water.
  3. (C)At the cathode, molecular oxygen gets converted to OH−\mathrm{OH^-}.
  4. (D)Oxides of nitrogen are major by-products of the electrochemical process.

Tests: Write the electrode reactions of the alkaline hydrazine–oxygen fuel cell.

Show solution
  1. This is the alkaline hydrazine–oxygen fuel cell. Oxidation (anode): N2H4+4OH−→N2+4H2O+4e−\mathrm{N_2H_4 + 4OH^- \rightarrow N_2 + 4H_2O + 4e^-}. Reduction (cathode): O2+2H2O+4e−→4OH−\mathrm{O_2 + 2H_2O + 4e^- \rightarrow 4OH^-}. Overall: N2H4+O2→N2+2H2O\mathrm{N_2H_4 + O_2 \rightarrow N_2 + 2H_2O}.
  2. (A) True: hydrazine is oxidised at the anode by OH−\mathrm{OH^-}, giving N2\mathrm{N_2} and water and 4 electrons per N2H4\mathrm{N_2H_4} (N goes from −2 to 0, two N atoms).
  3. (B) False: hydrazine is the fuel and is oxidised at the anode, not the cathode, and no nascent hydrogen is involved.
  4. (C) True: oxygen is reduced at the cathode to OH−\mathrm{OH^-}.
  5. (D) False: the products are only N2\mathrm{N_2} and H2O\mathrm{H_2O}; the 4-electron oxidation stops at N2\mathrm{N_2} (oxidation state 0) and no oxides of nitrogen are formed. That clean exhaust is why hydrazine fuel cells were used.

    Why: Forming NO or NO2 would need N in a positive oxidation state, which the cell reaction never reaches.

AnswerAnswer: (A, C)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

Organic reagents (selective reductions, Stephen reduction) · +4 / −2
The option(s) with correct sequence of reagents for the conversion of P to Q is(are) (The figure shows P: a cyclopentanone ring; the carbon next to the C=O carries a side chain −CH2C≡C(CH2)3CO2Et\mathrm{{-}CH_2C{\equiv}C(CH_2)_3CO_2Et}; the next ring carbon carries −CH2C≡C(CH2)3CN\mathrm{{-}CH_2C{\equiv}C(CH_2)_3CN}; the following ring carbon carries an acetate ester, −OCOCH3\mathrm{{-}OCOCH_3}. Q: the same carbon skeleton, with the ring C=O reduced to CH–OH, the acetate turned into a free OH, both triple bonds turned into cis (Z) double bonds, CO2Et\mathrm{CO_2Et} turned into CO2H\mathrm{CO_2H}, and CN turned into CHO.)
  1. (A)i) Lindlar’s catalyst, H2\mathrm{H_2}; ii) SnCl2/HCl\mathrm{SnCl_2/HCl}; iii) NaBH4\mathrm{NaBH_4}; iv) H3O+\mathrm{H_3O^+}
  2. (B)i) Lindlar’s catalyst, H2\mathrm{H_2}; ii) H3O+\mathrm{H_3O^+}; iii) SnCl2/HCl\mathrm{SnCl_2/HCl}; iv) NaBH4\mathrm{NaBH_4}
  3. (C)i) NaBH4\mathrm{NaBH_4}; ii) SnCl2/HCl\mathrm{SnCl_2/HCl}; iii) H3O+\mathrm{H_3O^+}; iv) Lindlar’s catalyst, H2\mathrm{H_2}
  4. (D)i) Lindlar’s catalyst, H2\mathrm{H_2}; ii) NaBH4\mathrm{NaBH_4}; iii) SnCl2/HCl\mathrm{SnCl_2/HCl}; iv) H3O+\mathrm{H_3O^+}

Tests: Order chemoselective reagents so each group changes once and nothing is over-reduced.

Show solution
  1. Changes needed: alkynes →\rightarrow cis alkenes (Lindlar, H2\mathrm{H_2}); ketone →\rightarrow secondary alcohol (NaBH4\mathrm{NaBH_4}, which leaves esters and nitriles alone); −CN→−CHO\mathrm{{-}CN} \rightarrow \mathrm{{-}CHO} (Stephen reduction: SnCl2/HCl\mathrm{SnCl_2/HCl} gives the aldimine salt RCH=NH⋅HCl\mathrm{RCH{=}NH \cdot HCl}, which H3O+\mathrm{H_3O^+} hydrolyses to RCHO); ethyl ester and acetate →\rightarrow acid and alcohol (H3O+\mathrm{H_3O^+}).
  2. Key ordering rule: NaBH4\mathrm{NaBH_4} must not meet the imine from the Stephen step, and the imine must be hydrolysed by H3O+\mathrm{H_3O^+} after it is formed.

    Why: NaBH4 reduces C=N to an amine, so the CHO would never form.

  3. (A) Wrong: NaBH4\mathrm{NaBH_4} comes after SnCl2/HCl\mathrm{SnCl_2/HCl}, so it reduces the aldimine to −CH2NH2\mathrm{{-}CH_2NH_2}; Q's CHO is not obtained.
  4. (B) Wrong: NaBH4\mathrm{NaBH_4} is the last step, after the Stephen step, so it reduces the imine to an amine, and nothing hydrolyses an imine to the aldehyde afterwards.
  5. (C) Correct: NaBH4\mathrm{NaBH_4} reduces only the ketone; SnCl2/HCl\mathrm{SnCl_2/HCl} then H3O+\mathrm{H_3O^+} give CHO and hydrolyse both esters; Lindlar H2\mathrm{H_2} finally makes the cis alkenes without touching the CHO.
  6. (D) Correct: Lindlar first (cis alkenes), NaBH4\mathrm{NaBH_4} (ketone only), SnCl2/HCl\mathrm{SnCl_2/HCl} (aldimine), H3O+\mathrm{H_3O^+} (aldehyde, acid and free OH in one step).
AnswerAnswer: (C, D)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

p-Block elements (oxoacids of sulphur) · +4 / −2
The compound(s) having peroxide linkage is(are)
  1. (A)H2S2O7\mathrm{H_2S_2O_7}
  2. (B)H2S2O8\mathrm{H_2S_2O_8}
  3. (C)H2S2O5\mathrm{H_2S_2O_5}
  4. (D)H2SO5\mathrm{H_2SO_5}

Tests: Recall the structures of the oxoacids of sulphur and spot the O–O bonds.

Show solution
  1. (A) H2S2O7\mathrm{H_2S_2O_7}, pyrosulphuric acid (oleum): HO−SO2−O−SO2−OH\mathrm{HO{-}SO_2{-}O{-}SO_2{-}OH}, two S atoms joined by a single bridging O. No O–O bond: no.
  2. (B) H2S2O8\mathrm{H_2S_2O_8}, peroxodisulphuric acid (Marshall's acid): HO−SO2−O−O−SO2−OH\mathrm{HO{-}SO_2{-}O{-}O{-}SO_2{-}OH}. Has an O–O bond: yes.
  3. (C) H2S2O5\mathrm{H_2S_2O_5}, disulphurous (pyrosulphurous) acid: HO−SO2−SO−OH\mathrm{HO{-}SO_2{-}SO{-}OH}, with an S–S bond. No peroxide.
  4. (D) H2SO5\mathrm{H_2SO_5}, peroxomonosulphuric acid (Caro's acid): HO−SO2−O−OH\mathrm{HO{-}SO_2{-}O{-}OH}. Has an O–O bond: yes.

    Why: The oxidation state of S stays +6 in both peroxo acids; the extra O sits in the peroxide group.

AnswerAnswer: (B, D) H2S2O8\mathrm{H_2S_2O_8} and H2SO5\mathrm{H_2SO_5}
Ask about this question

Chemistry, Section 3: 6 questions, answer is a non-negative integer: +4 if only the correct integer is entered, 0 in all other cases

Q8

Chemistry, Question 8 (4 marks)

Surface chemistry (adsorption) · +4
To form a complete monolayer of acetic acid on 1 g of charcoal, 100 mL of 0.5 M acetic acid was used. Some of the acetic acid remained unadsorbed. To neutralize the unadsorbed acetic acid, 40 mL of 1 M NaOH solution was required. If each molecule of acetic acid occupies P×10−23 m2\mathbf{P} \times 10^{-23}\ \mathrm{m^2} surface area on charcoal, the value of P is _____. [Use given data: Surface area of charcoal =1.5×102 m2 g−1= 1.5 \times 10^2\ \mathrm{m^2\,g^{-1}}; Avogadro’s number (NA)=6.0×1023 mol−1(N_A) = 6.0 \times 10^{23}\ \mathrm{mol^{-1}}]

Tests: Find the area per adsorbed molecule from a back-titration and a monolayer.

Show solution
  1. Acetic acid taken =0.100 L×0.5 M=0.05= 0.100\ \mathrm{L} \times 0.5\ \mathrm{M} = 0.05 mol. Unadsorbed (neutralised by NaOH 1:1) =0.040×1=0.04= 0.040 \times 1 = 0.04 mol.
  2. Adsorbed =0.05−0.04=0.01= 0.05 - 0.04 = 0.01 mol =0.01×6.0×1023=6.0×1021= 0.01 \times 6.0 \times 10^{23} = 6.0 \times 10^{21} molecules.
  3. These molecules cover the whole surface of 1 g of charcoal, 150 m2150\ \mathrm{m^2}, in one layer.

    Why: A complete monolayer means each molecule covers its own patch, with no stacking.

  4. Area per molecule =1506.0×1021=2.5×10−20 m2=2500×10−23 m2= \dfrac{150}{6.0 \times 10^{21}} = 2.5 \times 10^{-20}\ \mathrm{m^2} = 2500 \times 10^{-23}\ \mathrm{m^2}, so P=2500P = 2500.
AnswerAnswer: 2500
Ask about this question
Q9

Chemistry, Question 9 (4 marks)

Solutions (colligative properties) · +4
Vessel-1 contains w2w_2 g of a non-volatile solute X dissolved in w1w_1 g of water. Vessel-2 contains w2w_2 g of another non-volatile solute Y dissolved in w1w_1 g of water. Both the vessels are at the same temperature and pressure. The molar mass of X is 80% of that of Y. The van’t Hoff factor for X is 1.2 times of that of Y for their respective concentrations. The elevation of boiling point for solution in Vessel-1 is _____ % of the solution in Vessel-2.

Tests: Compare boiling point elevations through the van't Hoff factor and molar mass.

Show solution
  1. ΔTb=i Kb m\Delta T_b = i\,K_b\,m with molality m=w2×1000M×w1m = \dfrac{w_2 \times 1000}{M \times w_1}. Same solvent and same masses, so KbK_b, w1w_1, w2w_2 cancel in the ratio.
  2. ΔTb(1)ΔTb(2)=iXiY×MYMX=1.2×10.8=1.5\dfrac{\Delta T_b(1)}{\Delta T_b(2)} = \dfrac{i_X}{i_Y} \times \dfrac{M_Y}{M_X} = 1.2 \times \dfrac{1}{0.8} = 1.5.

    Why: A lighter solute gives more moles for the same mass, so molality goes as 1/M.

  3. So ΔTb\Delta T_b in Vessel-1 is 1.5×100%=150%1.5 \times 100\% = 150\% of that in Vessel-2.
AnswerAnswer: 150
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Biomolecules (nucleic acids) · +4
For a double strand DNA, one strand is given below: (The figure shows a single strand, read from the 5' end to the 3' end: A G T C A C G T A A G T C.) The amount of energy required to split the double strand DNA into two single strands is _____ kcal mol−1\mathrm{kcal\,mol^{-1}}. [Given: Average energy per H-bond for A-T base pair =1.0 kcal mol−1= 1.0\ \mathrm{kcal\,mol^{-1}}, G-C base pair =1.5 kcal mol−1= 1.5\ \mathrm{kcal\,mol^{-1}}, and A-U base pair =1.25 kcal mol−1= 1.25\ \mathrm{kcal\,mol^{-1}}. Ignore electrostatic repulsion between the phosphate groups.]

Tests: Count base pairs and hydrogen bonds in a DNA duplex.

Show solution
  1. Count the 13 bases of the given strand AGTCACGTAAGTC: A = 4, T = 3, G = 3, C = 3.
  2. In the double strand each A or T pairs as A–T and each G or C as G–C: A–T pairs =4+3=7= 4 + 3 = 7, G–C pairs =3+3=6= 3 + 3 = 6. DNA has no uracil, so the A–U value is not used.
  3. A–T pairs hold 2 H-bonds each: 7×2=147 \times 2 = 14 H-bonds ×1.0=14 kcal mol−1\times 1.0 = 14\ \mathrm{kcal\,mol^{-1}}.
  4. G–C pairs hold 3 H-bonds each: 6×3=186 \times 3 = 18 H-bonds ×1.5=27 kcal mol−1\times 1.5 = 27\ \mathrm{kcal\,mol^{-1}}.

    Why: The data are per H-bond, so the number of H-bonds per pair matters.

  5. Total =14+27=41 kcal mol−1= 14 + 27 = 41\ \mathrm{kcal\,mol^{-1}}.
AnswerAnswer: 41
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Chemical kinetics (radioactive dating) · +4
A sample initially contains only U-238 isotope of uranium. With time, some of the U-238 radioactively decays into Pb-206 while the rest of it remains undisintegrated. When the age of the sample is P×108\mathbf{P} \times 10^8 years, the ratio of mass of Pb-206 to that of U-238 in the sample is found to be 7. The value of P is _____. [Given: Half-life of U-238 is 4.5×1094.5 \times 10^9 years; log⁡e2=0.693\log_e 2 = 0.693]

Tests: Date a mineral from its Pb-206 / U-238 ratio using first-order decay.

Show solution
  1. Convert the mass ratio to a mole ratio: nPbnU=7×238206=8.087\dfrac{n_{\mathrm{Pb}}}{n_{\mathrm{U}}} = 7 \times \dfrac{238}{206} = 8.087.

    Why: Each U atom that decays becomes one Pb atom, so atoms (moles), not masses, add up.

  2. Initial U atoms N0=NU+NPbN_0 = N_{\mathrm{U}} + N_{\mathrm{Pb}}, so N0N=1+8.087=9.087\dfrac{N_0}{N} = 1 + 8.087 = 9.087.
  3. t=t1/2ln⁡2ln⁡N0N=4.5×1090.693×ln⁡9.087=4.5×109×2.2070.693t = \dfrac{t_{1/2}}{\ln 2}\ln\dfrac{N_0}{N} = \dfrac{4.5 \times 10^9}{0.693} \times \ln 9.087 = \dfrac{4.5 \times 10^9 \times 2.207}{0.693}.
  4. t=1.433×1010t = 1.433 \times 10^{10} years =143.3×108= 143.3 \times 10^8 years, so P=143P = 143 (the published key also lists 142.65, from slightly different log values).
AnswerAnswer: 143
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Coordination compounds and VSEPR (geometry) · +4
Among [Co(CN)4]4−\mathrm{[Co(CN)_4]^{4-}}, [Co(CO)3(NO)]\mathrm{[Co(CO)_3(NO)]}, XeF4\mathrm{XeF_4}, [PCl4]+\mathrm{[PCl_4]^+}, [PdCl4]2−\mathrm{[PdCl_4]^{2-}}, [ICl4]−\mathrm{[ICl_4]^-}, [Cu(CN)4]3−\mathrm{[Cu(CN)_4]^{3-}} and P4\mathrm{P_4} the total number of species with tetrahedral geometry is _____.

Tests: Decide tetrahedral versus square planar for complexes and main-group species.

Show solution
  1. [Co(CN)4]4−\mathrm{[Co(CN)_4]^{4-}}: Co(0), 3d93d^9 after pairing by the strong-field CN−\mathrm{CN^-}. Nine d electrons fill more than four d orbitals, so no inner d orbital is free for dsp2dsp^2: sp3sp^3, tetrahedral.

    Why: Square planar dsp2 needs one empty 3d orbital; d9 cannot spare one.

  2. [Co(CO)3(NO)]\mathrm{[Co(CO)_3(NO)]}: NO is counted as NO+\mathrm{NO^+}, so Co is −1, 3d103d^{10}: sp3sp^3, tetrahedral (isoelectronic with Ni(CO)4\mathrm{Ni(CO)_4}). [Cu(CN)4]3−\mathrm{[Cu(CN)_4]^{3-}}: Cu(I), 3d103d^{10}: sp3sp^3, tetrahedral.
  3. [PCl4]+\mathrm{[PCl_4]^+}: 4 bond pairs, no lone pair on P: tetrahedral. P4\mathrm{P_4}: four P atoms at the corners of a tetrahedron.
  4. XeF4\mathrm{XeF_4} (4 bond pairs + 2 lone pairs) and [ICl4]−\mathrm{[ICl_4]^-} (4 + 2) are square planar; [PdCl4]2−\mathrm{[PdCl_4]^{2-}} (Pd(II), 4d84d^8, dsp2dsp^2) is square planar.
  5. Tetrahedral: [Co(CN)4]4−\mathrm{[Co(CN)_4]^{4-}}, [Co(CO)3(NO)]\mathrm{[Co(CO)_3(NO)]}, [PCl4]+\mathrm{[PCl_4]^+}, [Cu(CN)4]3−\mathrm{[Cu(CN)_4]^{3-}}, P4\mathrm{P_4} =5= 5.
AnswerAnswer: 5
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Phenols and carbonyl compounds (tautomerism, Grignard reagents) · +4
An organic compound P having molecular formula C6H6O3\mathrm{C_6H_6O_3} gives ferric chloride test and does not have intramolecular hydrogen bond. The compound P reacts with 3 equivalents of NH2OH\mathrm{NH_2OH} to produce oxime Q. Treatment of P with excess methyl iodide in the presence of KOH produces compound R as the major product. Reaction of R with excess iso-butylmagnesium bromide followed by treatment with H3O+\mathrm{H_3O^+} gives compound S as the major product. The total number of methyl (−CH3\mathrm{{-}CH_3}) group(s) in compound S is _____.

Tests: Identify phloroglucinol from its tests and follow C-methylation and Grignard addition.

Show solution
  1. C6H6O3\mathrm{C_6H_6O_3} with a phenolic OH (FeCl3 test), no intramolecular H-bond (OH groups not ortho to each other) and three oxime-forming sites: P = phloroglucinol, benzene-1,3,5-triol, which reacts in its keto form cyclohexane-1,3,5-trione and gives a trioxime Q.

    Why: Only the 1,3,5-triol has a keto tautomer with three C=O groups, and it has no adjacent OH groups.

  2. With KOH and excess CH3I\mathrm{CH_3I} the trione is C-methylated at every α\alpha-carbon (each CH2\mathrm{CH_2} sits between two C=O groups): R = 2,2,4,4,6,6-hexamethylcyclohexane-1,3,5-trione, with 6 CH3\mathrm{CH_3} groups.
  3. R has no α\alpha-H, so the Grignard reagent cannot enolise it; excess (CH3)2CHCH2MgBr\mathrm{(CH_3)_2CHCH_2MgBr} adds to all three C=O groups and H3O+\mathrm{H_3O^+} gives S = 1,3,5-triisobutyl-2,2,4,4,6,6-hexamethylcyclohexane-1,3,5-triol.
  4. Methyl count: 6 on the ring + 2 in each of the three isobutyl groups (−CH2CH(CH3)2\mathrm{{-}CH_2CH(CH_3)_2}) =6+6=12= 6 + 6 = 12.
  5. Caution: each C=O here is flanked by two quaternary carbons, and a very hindered ketone can instead be reduced by a Grignard reagent with a β\beta-H (hydride transfer), which would give the triol with only 6 methyls. The question's "excess" Grignard and the published key (12) take addition.
AnswerAnswer: 12
Ask about this question

Chemistry, Section 4: 2 paragraphs, 2 questions on each, answer is a numerical value (truncate/round off to two decimal places): +3 if only the correct value is entered, 0 in all other cases

Q14

Chemistry, Question 14 (3 marks)

Carbonyl compounds and carboxylic acids (structure deduction) · +3
Paragraph I: An organic compound P with molecular formula C9H18O2\mathrm{C_9H_{18}O_2} decolorizes bromine water and also shows positive iodoform test. P on ozonolysis followed by treatment with H2O2\mathrm{H_2O_2} gives Q and R. While compound Q shows positive iodoform test, compound R does not give positive iodoform test. Q and R on oxidation with pyridinium chlorochromate (PCC) followed by heating give S and T, respectively. Both S and T show positive iodoform test. Complete copolymerization of 500 moles of Q and 500 moles of R gives one mole of a single acyclic copolymer U. [Given, atomic mass: H = 1, C = 12, O = 16] Question: Sum of number of oxygen atoms in S and T is _____.

Tests: Deduce an unsaturated diol from ozonolysis, PCC oxidation and decarboxylation data.

Show solution
  1. Degree of unsaturation of C9H18O2\mathrm{C_9H_{18}O_2}: 2(9)+2−182=1\dfrac{2(9) + 2 - 18}{2} = 1. Bromine water is decolorized, so that one unsaturation is a C=C\mathrm{C{=}C}; there is no C=O\mathrm{C{=}O}, so both O atoms are OH groups.

    Why: With the only unsaturation used by C=C, the iodoform test must come from a CH3CH(OH)– group.

  2. Oxidative ozonolysis (O3\mathrm{O_3}, then H2O2\mathrm{H_2O_2}) turns each =CH−\mathrm{{=}CH{-}} end into −COOH\mathrm{{-}COOH}, so Q and R are hydroxy acids, each carrying one of the two OH groups.
  3. PCC oxidises the secondary OH to C=O\mathrm{C{=}O}; "followed by heating" means a β\beta-keto acid that loses CO2\mathrm{CO_2}. For the products to be methyl ketones (iodoform positive) the OH must sit on the carbon β\beta to COOH: HOOC−CH2−CH(OH)−R′→HOOC−CH2−CO−R′→CH3−CO−R′\mathrm{HOOC{-}CH_2{-}CH(OH){-}R'} \rightarrow \mathrm{HOOC{-}CH_2{-}CO{-}R'} \rightarrow \mathrm{CH_3{-}CO{-}R'}.
  4. Q (iodoform positive) =CH3CH(OH)CH2COOH= \mathrm{CH_3CH(OH)CH_2COOH} (3-hydroxybutanoic acid, 4 C). R has the other 5 C and is iodoform negative: CH3CH2CH(OH)CH2COOH\mathrm{CH_3CH_2CH(OH)CH_2COOH} (3-hydroxypentanoic acid). So P =CH3CH(OH)CH2CH=CHCH2CH(OH)CH2CH3= \mathrm{CH_3CH(OH)CH_2CH{=}CHCH_2CH(OH)CH_2CH_3} (non-4-ene-2,7-diol), which fits C9H18O2\mathrm{C_9H_{18}O_2}.

    Why: R's CH(OH) carries an ethyl group, not a methyl, so R fails the iodoform test as required.

  5. S: CH3COCH2COOH→ΔCH3COCH3\mathrm{CH_3COCH_2COOH} \xrightarrow{\Delta} \mathrm{CH_3COCH_3} (acetone). T: CH3CH2COCH2COOH→ΔCH3COCH2CH3\mathrm{CH_3CH_2COCH_2COOH} \xrightarrow{\Delta} \mathrm{CH_3COCH_2CH_3} (butanone). Both are methyl ketones, so both give the iodoform test, as stated.
  6. Oxygen atoms: S (acetone, C3H6O\mathrm{C_3H_6O}) has 1, T (butanone, C4H8O\mathrm{C_4H_8O}) has 1. Sum =2= 2 (the published key also lists 4; the decarboxylated ketones that both give the iodoform test hold one O each).
AnswerAnswer: 2
Ask about this question
Q15

Chemistry, Question 15 (3 marks)

Polymers (condensation copolymer mass) · +3
Paragraph I: An organic compound P with molecular formula C9H18O2\mathrm{C_9H_{18}O_2} decolorizes bromine water and also shows positive iodoform test. P on ozonolysis followed by treatment with H2O2\mathrm{H_2O_2} gives Q and R. While compound Q shows positive iodoform test, compound R does not give positive iodoform test. Q and R on oxidation with pyridinium chlorochromate (PCC) followed by heating give S and T, respectively. Both S and T show positive iodoform test. Complete copolymerization of 500 moles of Q and 500 moles of R gives one mole of a single acyclic copolymer U. [Given, atomic mass: H = 1, C = 12, O = 16] Question: The molecular weight of U is _____.

Tests: Find the molar mass of a condensation copolymer from its monomers and links.

Show solution
  1. Degree of unsaturation of C9H18O2\mathrm{C_9H_{18}O_2}: 2(9)+2−182=1\dfrac{2(9) + 2 - 18}{2} = 1. Bromine water is decolorized, so that one unsaturation is a C=C\mathrm{C{=}C}; there is no C=O\mathrm{C{=}O}, so both O atoms are OH groups.

    Why: With the only unsaturation used by C=C, the iodoform test must come from a CH3CH(OH)– group.

  2. Oxidative ozonolysis (O3\mathrm{O_3}, then H2O2\mathrm{H_2O_2}) turns each =CH−\mathrm{{=}CH{-}} end into −COOH\mathrm{{-}COOH}, so Q and R are hydroxy acids, each carrying one of the two OH groups.
  3. PCC oxidises the secondary OH to C=O\mathrm{C{=}O}; "followed by heating" means a β\beta-keto acid that loses CO2\mathrm{CO_2}. For the products to be methyl ketones (iodoform positive) the OH must sit on the carbon β\beta to COOH: HOOC−CH2−CH(OH)−R′→HOOC−CH2−CO−R′→CH3−CO−R′\mathrm{HOOC{-}CH_2{-}CH(OH){-}R'} \rightarrow \mathrm{HOOC{-}CH_2{-}CO{-}R'} \rightarrow \mathrm{CH_3{-}CO{-}R'}.
  4. Q (iodoform positive) =CH3CH(OH)CH2COOH= \mathrm{CH_3CH(OH)CH_2COOH} (3-hydroxybutanoic acid, 4 C). R has the other 5 C and is iodoform negative: CH3CH2CH(OH)CH2COOH\mathrm{CH_3CH_2CH(OH)CH_2COOH} (3-hydroxypentanoic acid). So P =CH3CH(OH)CH2CH=CHCH2CH(OH)CH2CH3= \mathrm{CH_3CH(OH)CH_2CH{=}CHCH_2CH(OH)CH_2CH_3} (non-4-ene-2,7-diol), which fits C9H18O2\mathrm{C_9H_{18}O_2}.

    Why: R's CH(OH) carries an ethyl group, not a methyl, so R fails the iodoform test as required.

  5. S: CH3COCH2COOH→ΔCH3COCH3\mathrm{CH_3COCH_2COOH} \xrightarrow{\Delta} \mathrm{CH_3COCH_3} (acetone). T: CH3CH2COCH2COOH→ΔCH3COCH2CH3\mathrm{CH_3CH_2COCH_2COOH} \xrightarrow{\Delta} \mathrm{CH_3COCH_2CH_3} (butanone). Both are methyl ketones, so both give the iodoform test, as stated.
  6. Q =C4H8O3= \mathrm{C_4H_8O_3}: 48+8+48=10448 + 8 + 48 = 104. R =C5H10O3= \mathrm{C_5H_{10}O_3}: 60+10+48=11860 + 10 + 48 = 118. Each is a hydroxy acid, so they join by ester links (a polyester), losing one H2O\mathrm{H_2O} per link.
  7. One acyclic chain from 1000 monomer units has 1000−1=9991000 - 1 = 999 ester links, so 999 water molecules are lost.

    Why: An open chain of n units has n − 1 links; a ring would have n.

  8. M(U)=500(104)+500(118)−999(18)=52000+59000−17982=93018M(\mathrm{U}) = 500(104) + 500(118) - 999(18) = 52000 + 59000 - 17982 = 93018.
AnswerAnswer: 93018
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

Coordination compounds and redox (ferricyanide–iodide) · +3
Paragraph II: When potassium iodide is added to an aqueous solution of potassium ferricyanide, a reversible reaction is observed in which a complex P is formed. In a strong acidic medium, the equilibrium shifts completely towards P. Addition of zinc chloride to P in a slightly acidic medium results in a sparingly soluble complex Q. Question: The number of moles of potassium iodide required to produce two moles of P is _____.

Tests: Balance the ferricyanide–iodide redox reaction in aqueous KI.

Show solution
  1. Ferricyanide oxidises iodide and is itself reduced to ferrocyanide: P = K4[Fe(CN)6]\mathrm{K_4[Fe(CN)_6]} (Fe(III) →\rightarrow Fe(II), one electron per complex ion). The reaction is reversible; strong acid drives it forward.
  2. In aqueous KI the iodine formed does not stay as I2\mathrm{I_2}: it binds a further iodide as triiodide, I2+I−→I3−\mathrm{I_2 + I^- \rightarrow I_3^-}.

    Why: Iodine is barely soluble in water; in KI solution it is present as I3−.

  3. 2K3[Fe(CN)6]+3KI⇌2K4[Fe(CN)6]+KI3\mathrm{2K_3[Fe(CN)_6] + 3KI \rightleftharpoons 2K_4[Fe(CN)_6] + KI_3}: 2 electrons come from 2 I−\mathrm{I^-}, and a third I−\mathrm{I^-} holds the iodine as I3−\mathrm{I_3^-}.
  4. So 3 mol KI give 2 mol P. (Written with free I2\mathrm{I_2}, 2K3[Fe(CN)6]+2KI→2K4[Fe(CN)6]+I2\mathrm{2K_3[Fe(CN)_6] + 2KI \rightarrow 2K_4[Fe(CN)_6] + I_2}, the count would be 2; the question asks for two moles of P to give the triiodide stoichiometry a whole number.)
AnswerAnswer: 3
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

Coordination compounds (zinc ferrocyanide) · +3
Paragraph II: When potassium iodide is added to an aqueous solution of potassium ferricyanide, a reversible reaction is observed in which a complex P is formed. In a strong acidic medium, the equilibrium shifts completely towards P. Addition of zinc chloride to P in a slightly acidic medium results in a sparingly soluble complex Q. Question: The number of zinc ions present in the molecular formula of Q is _____.

Tests: Identify the zinc ferrocyanide precipitate and count its zinc ions.

Show solution
  1. P is potassium ferrocyanide, K4[Fe(CN)6]\mathrm{K_4[Fe(CN)_6]} (from Q16).
  2. With Zn2+\mathrm{Zn^{2+}} in slightly acidic medium and potassium ions present, ferrocyanide gives the sparingly soluble white double salt potassium zinc ferrocyanide: 2K4[Fe(CN)6]+3ZnCl2→K2Zn3[Fe(CN)6]2↓+6KCl\mathrm{2K_4[Fe(CN)_6] + 3ZnCl_2 \rightarrow K_2Zn_3[Fe(CN)_6]_2\downarrow + 6KCl}.

    Why: Removing ferrocyanide as this precipitate is what pulls the ferricyanide–iodide equilibrium fully to the right in iodometric estimation.

  3. Charge check: 2(+1)+3(+2)+2(−4)=02(+1) + 3(+2) + 2(-4) = 0. Q =K2Zn3[Fe(CN)6]2= \mathrm{K_2Zn_3[Fe(CN)_6]_2} contains 3 zinc ions. (The key also accepts 2, for the potassium-free formula Zn2[Fe(CN)6]\mathrm{Zn_2[Fe(CN)_6]}.)
AnswerAnswer: 3
Ask about this question

Questions are quoted from JEE (Advanced) 2024 Paper 2 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.