AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.
MathsClass 10CBSE
NCERT Solutions for Class 10 Maths Exercise 12.1
Step-by-step solutions to every question in Exercises 12.1 and 12.2 of the NCERT Class 10 Maths textbook (rationalised edition), with every area and volume recomputed from the solid formulas. Open a solution one step at a time, tap a follow-up question, or ask your own doubt about any step.
NCERT solutions for Exercise 12.1 of Class 10 Maths Chapter 12 Surface Areas and Volumes: all 9 questions answered step by step, as ideal answers in the CBSE board format. Free, with a doubt chat on every question.
Key ideas
Surface area of a combined solid: add only the surfaces you can see. Faces that are joined or covered are not on the surface.
Volume of a combined solid is the sum (or, for a hollow cut out, the difference) of the parts' volumes.
Take π=722 unless the question says otherwise, and read lengths carefully: a total height usually includes a radius.
Exercise 12.1: Surface area of a combination of solids
Q1
Exercise 12.1, Question 1
2 cubes each of volume 64 cm³ are joined end to end. Find the surface area of the resulting cuboid.
Tests: Finding the surface area of a cuboid made by joining two cubes, using its new length, breadth and height.
Show solution
Side of each cube: a3=64, so a=4 cm.
Joined end to end, the cuboid has l=4+4=8 cm, b=4 cm, h=4 cm.
Surface area =2(lb+bh+hl)=2(8×4+4×4+4×8)=2(32+16+32)=160 cm².
Check: two cubes have 2×6=12 faces of 16 cm² each; 2 are hidden, so 10×16=160 cm².
Why: The joined faces leave the surface.
AnswerSurface area of the cuboid = 160 cm².
Ask about this question
Q2
Exercise 12.1, Question 2
A vessel is in the form of a hollow hemisphere surmounted by a hollow cylinder. The diameter of the hemisphere is 14 cm and the total height of the vessel is 13 cm. Find the inner surface area of the vessel. (Take π=722.)
Tests: Adding the curved surface areas of a hemisphere and a cylinder that share a circular rim.
Show solution
Radius r=214=7 cm. Height of the cylinder h=13−7=6 cm.
Why: The hemisphere's depth equals its radius.
Inner surface area = CSA of hemisphere + CSA of cylinder =2πr2+2πrh.
Why: The vessel is open at the top and the inside has no flat base.
2πr2=2×722×7×7=308 cm²; 2πrh=2×722×7×6=264 cm².
Total =308+264=572 cm².
AnswerInner surface area of the vessel = 572 cm².
Ask about this question
Q3
Exercise 12.1, Question 3
A toy is in the form of a cone of radius 3.5 cm mounted on a hemisphere of same radius. The total height of the toy is 15.5 cm. Find the total surface area of the toy. (Take π=722.)
Tests: Finding the slant height of a cone from its height and radius, then adding the cone's and hemisphere's curved surfaces.
Show solution
r=3.5 cm. Height of the cone h=15.5−3.5=12 cm.
Slant height l=h2+r2=144+12.25=156.25=12.5 cm.
TSA of toy = CSA of cone + CSA of hemisphere =πrl+2πr2=πr(l+2r).
=722×3.5×(12.5+7)=11×19.5=214.5 cm².
AnswerTotal surface area of the toy = 214.5 cm².
Ask about this question
Q4
Exercise 12.1, Question 4
A cubical block of side 7 cm is surmounted by a hemisphere. What is the greatest diameter the hemisphere can have? Find the surface area of the solid. (Take π=722.)
Tests: Seeing that the hemisphere covers a circle on the top face, and adding its curved surface while removing that circle.
Show solution
The hemisphere sits on a face of side 7 cm, so its greatest diameter is 7 cm, and r=3.5 cm.
Surface area = (surface of cube) − (circle covered) + (CSA of hemisphere) =6a2−πr2+2πr2=6a2+πr2.
=6×49+722×3.5×3.5=294+38.5=332.5 cm².
AnswerGreatest diameter = 7 cm; surface area of the solid = 332.5 cm².
Ask about this question
Q5
Exercise 12.1, Question 5
A hemispherical depression is cut out from one face of a cubical wooden block such that the diameter l of the hemisphere is equal to the edge of the cube. Determine the surface area of the remaining solid.
Tests: Finding the surface area left after a hemisphere is cut out: remove the circular opening, add the hollow's curved surface.
Show solution
Edge of cube =l, radius of hemisphere r=2l.
Remaining surface =6l2−πr2+2πr2=6l2+πr2.
Why: The circular opening is removed from one face; the inside of the hollow is added.
=6l2+π4l2=4l2(24+π).
AnswerSurface area of the remaining solid =41l2(π+24) square units.
Ask about this question
Q6
Exercise 12.1, Question 6
A medicine capsule is in the shape of a cylinder with two hemispheres stuck to each of its ends. (The textbook's Fig. 12.10 shows the capsule: a cylinder with a hemispherical cap at each end.) The length of the entire capsule is 14 mm and the diameter of the capsule is 5 mm. Find its surface area. (Take π=722.)
Tests: Adding the curved surfaces of a cylinder and two hemispheres, after finding the cylinder's length.
Show solution
r=2.5 mm. Length of the cylindrical part h=14−2×2.5=9 mm.
Surface area = CSA of cylinder +2× CSA of hemisphere =2πrh+4πr2=2πr(h+2r).
=2×722×2.5×(9+5)=2×722×2.5×14=220 mm².
AnswerSurface area of the capsule = 220 mm².
Ask about this question
Q7
Exercise 12.1, Question 7
A tent is in the shape of a cylinder surmounted by a conical top. If the height and diameter of the cylindrical part are 2.1 m and 4 m respectively, and the slant height of the top is 2.8 m, find the area of the canvas used for making the tent. Also, find the cost of the canvas of the tent at the rate of ₹500 per m². (Note that the base of the tent will not be covered with canvas.) (Take π=722.)
Tests: Adding the curved surfaces of a cylinder and a cone for a real object, then pricing the area.
Show solution
r=2 m, height of cylinder h=2.1 m, slant height of cone l=2.8 m.
Canvas = CSA of cylinder + CSA of cone =2πrh+πrl=πr(2h+l).
=722×2×(4.2+2.8)=722×2×7=44 m².
Cost =44×500=22000 rupees.
AnswerCanvas used = 44 m²; cost = ₹22000.
Ask about this question
Q8
Exercise 12.1, Question 8
From a solid cylinder whose height is 2.4 cm and diameter 1.4 cm, a conical cavity of the same height and same diameter is hollowed out. Find the total surface area of the remaining solid to the nearest cm². (Take π=722.)
Tests: Listing the surfaces left after hollowing a cone out of a cylinder: curved side, one base, and the cone's inner surface.
Show solution
r=0.7 cm, h=2.4 cm. Slant height of the cavity l=2.42+0.72=5.76+0.49=6.25=2.5 cm.
TSA = CSA of cylinder + area of the bottom base + CSA of cone =2πrh+πr2+πrl=πr(2h+r+l).
Why: The top circle is the cone's open base, so it is gone.
=722×0.7×(4.8+0.7+2.5)=2.2×8=17.6 cm².
To the nearest cm²: 18 cm².
AnswerTotal surface area ≈ 18 cm² (17.6 cm²).
Ask about this question
Q9
Exercise 12.1, Question 9
A wooden article was made by scooping out a hemisphere from each end of a solid cylinder. (The textbook's Fig. 12.11 shows the cylinder with a hemispherical hollow at the top and at the bottom.) If the height of the cylinder is 10 cm, and its base is of radius 3.5 cm, find the total surface area of the article. (Take π=722.)
Tests: Replacing each flat end of a cylinder by the curved surface of a hemispherical hollow.
Show solution
r=3.5 cm, h=10 cm.
TSA = CSA of cylinder +2× CSA of hemisphere =2πrh+4πr2=2πr(h+2r).
Why: Each end circle is replaced by the inside of a hemisphere.
=2×722×3.5×(10+7)=22×17=374 cm².
AnswerTotal surface area of the article = 374 cm².
Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.
Check yourself on this chapter
Practise with fresh questions at your level, free: 10 questions a day with an account.