AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

ISC Class 12 Physics Specimen Paper 2025 with Solutions

Step-by-step solutions to every question of the ISC 2025 Specimen Question Paper for Physics Paper 1 (Theory), Class 12: the fourteen one-mark items of Section A, the two-mark questions of Section B, the three-mark questions of Section C and the five-mark questions of Section D, with both alternatives solved wherever the paper offers a choice. Each solution follows the ISC marking style (formula, substitution, result with units) and every answer is checked against the official CISCE Specimen Answer Key; where the key slips, the solution follows the physics and says so.

ISC 2025 Physics Specimen Question Paper (861): 27 questions, 70 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. Also solved: Physics Specimen Paper 2026.

Section A: 14 marks: one question having fourteen sub-parts of one mark each; answer all

Q1 (i)

Question 1 (i) (1 mark)

Wheatstone bridge
Figure 1 below shows a circuit containing an ammeter A, a galvanometer G and a plug key K. When the key is closed: (Figure 1: a Wheatstone bridge PQRS with 2 Ω from P to Q, 5 Ω from Q to R, 4 Ω from P to the bottom junction and 10 Ω from the bottom junction to R; the galvanometer G joins Q to the bottom junction; a 2 V cell, the ammeter A and the key K are in series between P and R.)
  1. (A)both G and A show deflections.
  2. (B)neither G nor A shows deflection.
  3. (C)G shows deflection but A does not.
  4. (D)A shows deflection but G does not.

Tests: A balanced Wheatstone bridge sends no current through the galvanometer.

Show solution
  1. Balance condition of a Wheatstone bridge: PQ=RS\dfrac{P}{Q} = \dfrac{R}{S}.
  2. Here 25=0.4\dfrac{2}{5} = 0.4 and 410=0.4\dfrac{4}{10} = 0.4: the bridge is balanced, so Q and the bottom junction are at the same potential and no current flows through G.
  3. The cell still drives a current through the two arms of the bridge, and all of it passes through the ammeter: A deflects.
Answer(d) A shows deflection but G does not.
Ask about this question
Q1 (ii)

Question 1 (ii) (1 mark)

Magnetic field of a circular coil
A circular coil having N turns of radius R carrying a current I is used to produce a magnetic field B at its centre O. If this coil is opened and rewound such that the radius of the newly formed coil is 2R, carrying the same current I, what will be the magnetic field at the centre O?
  1. (A)2B
  2. (B)B
  3. (C)B/2
  4. (D)B/4

Tests: Field at the centre of a coil, with the number of turns fixed by the wire's length.

Show solution
  1. Field at the centre of a coil: B=μ0NI2RB = \dfrac{\mu_0 N I}{2R}.
  2. The length of wire is fixed: N(2πR)=N′(2π⋅2R)N(2\pi R) = N'(2\pi \cdot 2R), so N′=N2N' = \dfrac{N}{2}.

    Why: Rewinding the same wire on a bigger radius gives fewer turns.

  3. B′=μ0(N/2)I2(2R)=14⋅μ0NI2R=B4B' = \dfrac{\mu_0 (N/2) I}{2(2R)} = \dfrac{1}{4}\cdot\dfrac{\mu_0 N I}{2R} = \dfrac{B}{4}.
Answer(d) B/4
Ask about this question
Q1 (iii)

Question 1 (iii) (1 mark)

Magnetic properties of materials
Magnetic susceptibility of a diamagnetic substance:
  1. (A)decreases with the increase in its temperature.
  2. (B)is not affected by the change in its temperature.
  3. (C)increases with increase in its temperature.
  4. (D)first increases then decreases with increase in its with temperature.

Tests: Temperature dependence of susceptibility for dia-, para- and ferromagnetic substances.

Show solution
  1. Diamagnetism comes from the change in the orbital motion of electrons when a field is applied; the atoms have no permanent moments for thermal agitation to disorder.
  2. So the susceptibility of a diamagnetic (small and negative) does not depend on temperature.
  3. For comparison, a paramagnetic obeys Curie's law χ∝1T\chi \propto \dfrac{1}{T}, option (a).
Answer(b) is not affected by the change in its temperature.
Ask about this question
Q1 (iv)

Question 1 (iv) (1 mark)

Bohr model of the atom
The de Broglie wavelength of an electron in the first Bohr's orbit of hydrogen atom is equal to:
  1. (A)diameter of the first orbit.
  2. (B)circumference of the first orbit.
  3. (C)radius of the second orbit.
  4. (D)h/2πh/2\pi.

Tests: de Broglie's interpretation of Bohr's quantisation condition.

Show solution
  1. Bohr's condition: mvrn=nh2πmvr_n = \dfrac{nh}{2\pi}, so 2πrn=nhmv=nλ2\pi r_n = n\dfrac{h}{mv} = n\lambda.

    Why: A whole number of de Broglie waves fits round the orbit.

  2. For n=1n = 1: λ=2πr1\lambda = 2\pi r_1, the circumference of the first orbit.
Answer(b) circumference of the first orbit.
Ask about this question
Q1 (v)

Question 1 (v) (1 mark)

Semiconductor diodes
An ideal PN junction diode offers:
  1. (A)zero resistance in forward as well as reverse bias.
  2. (B)infinite resistance in forward as well as reverse bias.
  3. (C)zero resistance in forward, but infinite resistance in reverse bias.
  4. (D)infinite resistance in forward, but zero resistance in reverse bias.

Tests: The ideal diode as a one-way switch.

Show solution
  1. An ideal diode is a one-way switch: it conducts freely when forward biased (a closed switch, zero resistance) and blocks completely when reverse biased (an open switch, infinite resistance).
Answer(c) zero resistance in forward, but infinite resistance in reverse bias.
Ask about this question
Q1 (vi)

Question 1 (vi) (1 mark)

Optical instruments
Given below are two statements marked Assertion and Reason. Read the two statements and choose the correct option. Assertion: An astronomical telescope has an objective lens having large focal length. Reason: Magnifying power of an astronomical telescope varies directly with focal length of the objective lens.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  3. (C)Assertion is false and Reason is true.
  4. (D)Both Assertion and Reason are false.

Tests: Magnifying power of a telescope, M=fo/feM = f_o/f_e.

Show solution
  1. Magnifying power (normal adjustment): M=fofeM = \dfrac{f_o}{f_e}, so M∝foM \propto f_o. The Reason is true.
  2. That is why the objective is chosen with a large focal length (and the eyepiece with a short one): the Assertion is true, and the Reason explains it.
Answer(a) Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
Ask about this question
Q1 (vii)

Question 1 (vii) (1 mark)

Total internal reflection
Given below are two statements marked, Assertion and Reason. Read the two statements and choose the correct option. Assertion: If critical angle of glass-air pair (μg = 3/2) is θ₁ and that of water-air pair (μw = 4/3) is θ₂, then the critical angle for the water-glass pair will lie between θ₁ and θ₂. Reason: A medium is optically denser if its refractive index is greater.
  1. (A)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  2. (B)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  3. (C)Assertion is false and Reason is true.
  4. (D)Both Assertion and Reason are false.

Tests: Critical angle between two media: sin⁡θc=μrarerμdenser\sin\theta_c = \dfrac{\mu_{\text{rarer}}}{\mu_{\text{denser}}}.

Show solution
  1. Glass-air: sin⁡θ1=23\sin\theta_1 = \dfrac{2}{3}, θ1≈41.8∘\theta_1 \approx 41.8^\circ. Water-air: sin⁡θ2=34\sin\theta_2 = \dfrac{3}{4}, θ2≈48.6∘\theta_2 \approx 48.6^\circ.
  2. Water-glass (light in glass): sin⁡θc=μwμg=4/33/2=89\sin\theta_c = \dfrac{\mu_w}{\mu_g} = \dfrac{4/3}{3/2} = \dfrac{8}{9}, θc≈62.7∘\theta_c \approx 62.7^\circ.
  3. 62.7∘62.7^\circ is larger than both θ1\theta_1 and θ2\theta_2, so the Assertion is false. The Reason is the definition of optically denser: true.
Answer(c) Assertion is false and Reason is true.
Ask about this question
Q1

Question 1 (7 marks)

Short answers across the syllabus
(B) Answer the following questions briefly.
  1. (i)
    Current I flowing through a metallic wire is gradually increased. Show graphically how heating power (P) developed in it varies with the current (I).
  2. (ii)
    Explain why core of a transformer is always laminated.
  3. (iii)
    Why does a car driver use a convex mirror as a rear-view mirror?
  4. (iv)
    Represent diagrammatically how the incident planar wavefronts of wavelength λ\lambda pass through an aperture of size d, when d is approximately equal to λ\lambda.
  5. (v)
    What is meant by "Dual nature of matter"?
  6. (vi)
    What happens when an electron collides with a positron?
  7. (vii)
    What energy conversion takes place in a solar cell?

Tests: Recall core facts: Joule heating, eddy currents, convex mirrors, diffraction, matter waves, annihilation, solar cells.

Show solution

(i) Current I flowing through a metallic wire is gradually increased. Show graphically how heating power (P) developed in it varies with the current (I).

  1. Joule heating: P=I2RP = I^2 R. For a fixed resistance, P∝I2P \propto I^2.
  2. Graph: P on the y-axis, I on the x-axis; a parabola from the origin, flat near I = 0 and curving upwards ever more steeply.

    Why: Doubling the current makes the heating four times as large.

AnswerA parabola through the origin, P∝I2P \propto I^2, curving upwards.

(ii) Explain why core of a transformer is always laminated.

  1. The changing flux in the iron core induces eddy currents in it, which waste energy as heat.
  2. Thin sheets insulated from each other break up the eddy-current paths (raise their resistance), so the eddy currents and the energy lost to them are much smaller.
AnswerTo reduce the loss of energy (as heat) due to eddy currents in the core.

(iii) Why does a car driver use a convex mirror as a rear-view mirror?

  1. A convex mirror always forms an erect, diminished, virtual image of objects behind it, however far away they are.
  2. Because the images are small, a wide area behind the car fits in the mirror: a wide field of view.
AnswerIt forms erect, diminished images, so it gives a wide field of view of the traffic behind.

(iv) Represent diagrammatically how the incident planar wavefronts of wavelength λ\lambda pass through an aperture of size d, when d is approximately equal to λ\lambda.

  1. Draw equally spaced parallel straight lines (plane wavefronts) arriving at a barrier with a narrow gap of width about one wavelength.
  2. Beyond the gap draw circular arcs centred on the gap (diverging spherical wavefronts), spreading into the region behind the barrier on both sides.

    Why: When d is comparable to λ the aperture acts like a point source: strong diffraction.

AnswerPlane wavefronts in; diverging spherical (circular) wavefronts out of the aperture, spreading widely (diffraction).

(v) What is meant by "Dual nature of matter"?

  1. Moving material particles such as electrons show wave properties (diffraction) as well as particle properties, with de Broglie wavelength λ=hp\lambda = \dfrac{h}{p}.
AnswerMatter shows both particle nature and wave nature; a particle of momentum p has a wavelength λ=h/p\lambda = h/p.

(vi) What happens when an electron collides with a positron?

  1. The electron and its antiparticle annihilate: their mass is converted into energy (E=mc2E = mc^2), carried away as gamma-ray photons (usually two, moving in opposite directions to conserve momentum).
AnswerThey annihilate each other, producing gamma-ray photons.

(vii) What energy conversion takes place in a solar cell?

  1. Light absorbed at the p-n junction creates electron-hole pairs, which the junction field separates to give an emf.
AnswerSolar (light) energy is converted into electrical energy.
Ask about this question

Section B: 14 marks: seven questions of two marks each; internal choice in two questions

Q2

Question 2 (2 marks)

Capacitors and dielectrics
Answer (i) or (ii).
  1. (i)(a)
    A dielectric slab of dielectric constant K and thickness t is introduced between the two plates of a capacitor of plate-separation d (> t) and common area A. The capacitance of this system is given as C=ε0A(d−t)+tKC = \dfrac{\varepsilon_0 A}{(d - t) + \dfrac{t}{K}}. How does the capacitance C modify in each of the following cases? (a) The dielectric slab covers half the distance of separation between the two plates.
  2. (i)(b)
    The whole space between the plates is filled with the dielectric.
  3. (ii)(a)
    OR: In Figure 2, the current-voltage graphs for a conductor are given at two different temperatures T₁ and T₂ (two straight lines through the origin, I on the y-axis and V on the x-axis; the T₁ line makes the larger angle θ₁ with the V-axis, the T₂ line the smaller angle θ₂). At which temperature T₁ or T₂ is the resistance higher?
  4. (ii)(b)
    Which temperature (T₁ or T₂) is higher?

Tests: Capacitance with a dielectric slab; resistance from the slope of an I-V graph.

Show solution

(i)(a) A dielectric slab of dielectric constant K and thickness t is introduced between the two plates of a capacitor of plate-separation d (> t) and common area A. The capacitance of this system is given as C=ε0A(d−t)+tKC = \dfrac{\varepsilon_0 A}{(d - t) + \dfrac{t}{K}}. How does the capacitance C modify in each of the following cases? (a) The dielectric slab covers half the distance of separation between the two plates.

  1. Put t=d2t = \dfrac{d}{2}: C=ε0Ad2+d2KC = \dfrac{\varepsilon_0 A}{\dfrac{d}{2} + \dfrac{d}{2K}}.
  2. C=ε0Ad(K+1)2K=2Kε0Ad(K+1)C = \dfrac{\varepsilon_0 A}{\dfrac{d(K + 1)}{2K}} = \dfrac{2K\varepsilon_0 A}{d(K + 1)}.
AnswerC=2Kε0Ad(K+1)C = \dfrac{2K\varepsilon_0 A}{d(K + 1)}

(i)(b) The whole space between the plates is filled with the dielectric.

  1. Put t=dt = d: C=ε0A0+dK=Kε0AdC = \dfrac{\varepsilon_0 A}{0 + \dfrac{d}{K}} = \dfrac{K\varepsilon_0 A}{d}, K times the capacitance without the slab.
AnswerC=Kε0AdC = \dfrac{K\varepsilon_0 A}{d}

(ii)(a) OR: In Figure 2, the current-voltage graphs for a conductor are given at two different temperatures T₁ and T₂ (two straight lines through the origin, I on the y-axis and V on the x-axis; the T₁ line makes the larger angle θ₁ with the V-axis, the T₂ line the smaller angle θ₂). At which temperature T₁ or T₂ is the resistance higher?

  1. The slope of an I-V graph is the conductance: tan⁡θ=IV=1R\tan\theta = \dfrac{I}{V} = \dfrac{1}{R}, so R=1tan⁡θR = \dfrac{1}{\tan\theta}.
  2. θ1>θ2\theta_1 > \theta_2, so tan⁡θ1>tan⁡θ2\tan\theta_1 > \tan\theta_2 and RT1<RT2R_{T_1} < R_{T_2}.
AnswerThe resistance is higher at T₂ (the less steep line).

(ii)(b) Which temperature (T₁ or T₂) is higher?

  1. The resistance of a metallic conductor rises with temperature (the ions vibrate more and electrons collide more often).
  2. The resistance is higher at T₂, so T₂ is the higher temperature.
AnswerT₂ > T₁
Ask about this question
Q3

Question 3 (2 marks)

Electric dipole
Arrangement of an oxygen ion and two hydrogen ions in a water molecule is shown in Figure 3 (the oxygen ion at the vertex, each H⁺ ion at distance l from it, the two O-H lines making an angle θ). Calculate electric dipole moment of water molecule. Express your answer in terms of e (charge on hydrogen ion), l and θ.

Tests: Add dipole moments as vectors.

Show solution
  1. Each O-H pair is a dipole of charges ±e\pm e separated by ll: p1=p2=elp_1 = p_2 = el, directed from the oxygen towards the hydrogen.
  2. Each moment makes an angle θ2\dfrac{\theta}{2} with the bisector: the components along the bisector add, the perpendicular components cancel.
  3. p=2elcos⁡θ2p = 2el\cos\dfrac{\theta}{2}, along the bisector of the H-O-H angle, pointing from O towards the H side.
Answerp=2elcos⁡θ2p = 2el\cos\dfrac{\theta}{2}, along the bisector of the angle θ
Ask about this question
Q4

Question 4 (2 marks)

Kirchhoff's laws and the potentiometer
Answer (i) or (ii).
  1. (i)(a)
    Figure 4 shows a part of an electric circuit: a current I = 5 A enters junction A; from A, I₁ = 2 A flows through a 4 Ω resistor up to B and I₂ flows through a 5 Ω resistor down to D; from B, I₃ flows down through a 7 Ω resistor to D. Apply Kirchhoff's junction rule to the junction A to find current flowing through the 5 Ω resistor.
  2. (i)(b)
    Apply Kirchhoff's loop rule to the loop ABDA to find current flowing through the 7 Ω resistor.
  3. (ii)
    OR: In a potentiometer, a cell is balanced against 110 cm when the circuit is open. A cell is balanced at 100 cm when short-circuited through a resistance of 10 Ω. Find the internal resistance of the cell.

Tests: Kirchhoff's junction and loop rules; internal resistance with a potentiometer.

Show solution

(i)(a) Figure 4 shows a part of an electric circuit: a current I = 5 A enters junction A; from A, I₁ = 2 A flows through a 4 Ω resistor up to B and I₂ flows through a 5 Ω resistor down to D; from B, I₃ flows down through a 7 Ω resistor to D. Apply Kirchhoff's junction rule to the junction A to find current flowing through the 5 Ω resistor.

  1. Junction rule at A: I=I1+I2I = I_1 + I_2.
  2. 5=2+I2⇒I2=3 A5 = 2 + I_2 \Rightarrow I_2 = 3\ \text{A}.
AnswerCurrent through the 5 Ω resistor: I₂ = 3 A

(i)(b) Apply Kirchhoff's loop rule to the loop ABDA to find current flowing through the 7 Ω resistor.

  1. Going round A → B → D → A, the potential drops are 4I14I_1 (A to B) and 7I37I_3 (B to D); from D back to A we go against I2I_2, a rise of 5I25I_2. No cell in the loop: −4I1−7I3+5I2=0-4I_1 - 7I_3 + 5I_2 = 0.
  2. 4(2)+7I3=5(3)⇒7I3=15−8=74(2) + 7I_3 = 5(3) \Rightarrow 7I_3 = 15 - 8 = 7.
  3. I3=1 AI_3 = 1\ \text{A}.
AnswerCurrent through the 7 Ω resistor: I₃ = 1 A

(ii) OR: In a potentiometer, a cell is balanced against 110 cm when the circuit is open. A cell is balanced at 100 cm when short-circuited through a resistance of 10 Ω. Find the internal resistance of the cell.

  1. Open circuit: E∝l1=110 cmE \propto l_1 = 110\ \text{cm}. With the 10 Ω across it: terminal voltage V∝l2=100 cmV \propto l_2 = 100\ \text{cm}.
  2. EV=R+rR=l1l2\dfrac{E}{V} = \dfrac{R + r}{R} = \dfrac{l_1}{l_2}, so r=R(l1l2−1)r = R\left(\dfrac{l_1}{l_2} - 1\right).
  3. r=10(110100−1)=1 Ωr = 10\left(\dfrac{110}{100} - 1\right) = 1\ \Omega.
AnswerInternal resistance r = 1 Ω
Ask about this question
Q5

Question 5 (2 marks)

Force between parallel currents
Figure 5 shows two long, parallel wires (I on the left, II on the right) carrying current in the same direction such that I₁ < I₂.
  1. (i)
    In which direction will wire I₁ move?
  2. (ii)
    If the direction of the current I₂ is reversed, in which direction will the wire I₁ move now?

Tests: Parallel currents attract, antiparallel currents repel.

Show solution

(i) In which direction will wire I₁ move?

  1. Each wire sits in the other's magnetic field; the force per unit length is FL=μ0I1I22πd\dfrac{F}{L} = \dfrac{\mu_0 I_1 I_2}{2\pi d} on each wire (Newton's third law), whichever current is larger.
  2. Currents in the same direction attract, so wire I₁ moves towards wire II (the I₂ wire).
  3. The specimen answer key writes "towards I₁"; it means towards the other wire, I₂.
AnswerWire I₁ moves towards wire II (they attract).

(ii) If the direction of the current I₂ is reversed, in which direction will the wire I₁ move now?

  1. Antiparallel currents repel, so wire I₁ moves away from wire II.
AnswerWire I₁ moves away from wire II (they repel).
Ask about this question
Q6

Question 6 (2 marks)

Refraction through lenses and prisms
Answer both parts.
  1. (i)
    The focal length of a double convex lens is equal to the radius of curvature of either surface. What is the refractive index of its material?
  2. (ii)
    What is meant by a thin prism?

Tests: Lens maker's formula; the thin prism and its deviation.

Show solution

(i) The focal length of a double convex lens is equal to the radius of curvature of either surface. What is the refractive index of its material?

  1. Lens maker's formula for an equiconvex lens: 1f=(μ−1)(1R+1R)=2(μ−1)R\dfrac{1}{f} = (\mu - 1)\left(\dfrac{1}{R} + \dfrac{1}{R}\right) = \dfrac{2(\mu - 1)}{R}.
  2. With f=Rf = R: 1R=2(μ−1)R⇒μ−1=12\dfrac{1}{R} = \dfrac{2(\mu - 1)}{R} \Rightarrow \mu - 1 = \dfrac{1}{2}.
  3. μ=1.5\mu = 1.5
AnswerRefractive index μ = 1.5

(ii) What is meant by a thin prism?

  1. A thin prism has a small refracting angle A (a few degrees; the specimen key says less than about 4∘4^\circ). For it the deviation is independent of the angle of incidence: δ=(μ−1)A\delta = (\mu - 1)A.
AnswerA prism whose refracting angle is small (a few degrees).
Ask about this question
Q7

Question 7 (2 marks)

Electromagnetic waves
Answer both parts.
  1. (i)
    Name the electromagnetic radiation that has been used in obtaining the image below. (The image is a chest radiograph: ribs, spine and lungs shown in shades of grey.)
  2. (ii)
    What is the wavelength range of electromagnetic radiation used in radio broadcast?

Tests: Uses of the parts of the electromagnetic spectrum.

Show solution

(i) Name the electromagnetic radiation that has been used in obtaining the image below. (The image is a chest radiograph: ribs, spine and lungs shown in shades of grey.)

  1. Bones absorb this radiation more than soft tissue, giving the shadow picture of the ribs: it is a radiograph, taken with X-rays.
AnswerX-rays

(ii) What is the wavelength range of electromagnetic radiation used in radio broadcast?

  1. Radio broadcast uses radio waves: FM at about 3 m, short wave tens of metres, medium-wave AM a few hundred metres.
AnswerRadio waves of wavelength greater than about 1 m (up to several hundred metres).
Ask about this question
Q8

Question 8 (2 marks)

Photoelectric effect
How does stopping potential in photoelectric emission vary if
  1. (i)
    the intensity of the incident radiation increases?
  2. (ii)
    the frequency of incident radiation decreases?

Tests: Stopping potential depends on frequency, not intensity.

Show solution

(i) the intensity of the incident radiation increases?

  1. eV0=hν−WeV_0 = h\nu - W: the stopping potential depends on the photon energy, not on how many photons arrive. More intensity gives more photoelectrons (a larger photocurrent), not faster ones.
AnswerIt does not change (it is independent of intensity).

(ii) the frequency of incident radiation decreases?

  1. V0=heν−WeV_0 = \dfrac{h}{e}\nu - \dfrac{W}{e}: a lower frequency gives a smaller maximum kinetic energy, so a smaller stopping potential.
  2. It falls linearly with the frequency and becomes zero at the threshold frequency; below that there is no emission at all.
AnswerIt decreases (linearly with ν), reaching zero at the threshold frequency.
Ask about this question

Section C: 27 marks: nine questions of three marks each; internal choice in two questions

Q9

Question 9 (3 marks)

Gauss's law
"A uniformly charged conducting spherical shell for the points outside the shell behaves as if the entire charge of the shell is concentrated at its centre". Show this with the help of a proper diagram and verify this statement.

Tests: Field of a charged spherical shell outside it, by Gauss's law.

Show solution
  1. Diagram: a spherical shell of radius R, centre O, carrying charge q (surface density σ); a point P outside at distance r > R; a concentric Gaussian sphere of radius r drawn through P, with E pointing radially outward at P.
  2. By spherical symmetry E is radial and has the same magnitude everywhere on the Gaussian sphere, so it is parallel to each area element ΔS.
  3. Flux: ϕ=∑E ΔS=E×4πr2\phi = \sum E\,\Delta S = E \times 4\pi r^2.
  4. Charge enclosed: q=σ×4πR2q = \sigma \times 4\pi R^2. Gauss's law: E×4πr2=qε0E \times 4\pi r^2 = \dfrac{q}{\varepsilon_0}.
  5. E=q4πε0r2=σR2ε0r2E = \dfrac{q}{4\pi\varepsilon_0 r^2} = \dfrac{\sigma R^2}{\varepsilon_0 r^2}, exactly the field of a point charge q placed at O (Coulomb's law). Hence verified.

    Why: The key writes the flux as E × 4πR²; over the Gaussian sphere through P it is E × 4πr².

AnswerE=14πε0qr2E = \dfrac{1}{4\pi\varepsilon_0}\dfrac{q}{r^2} for r>Rr > R: the same as a point charge q at the centre.
Ask about this question
Q10

Question 10 (3 marks)

Current electricity: cells and drift velocity
Answer (i) or (ii).
  1. (i)
    Study the two circuits shown in Figure 6 (circuit 1: two cells, each of emf E and internal resistance r, in series with a load R; circuit 2: the same two cells in parallel, across the same load R). The cells in the two circuits are identical to each other. The resistance of the load resistor R is the same in both circuits. If the same current flows through the resistor R in both circuits, calculate the internal resistance of each cell in terms of the resistance of resistor R. Show your calculations.
  2. (ii)(a)
    OR: The drift velocity of electrons in a conductor connected to a battery is given by v⃗d=−eE⃗τm\vec{v}_d = -\dfrac{e\vec{E}\tau}{m}. Here, e is the charge of the electron, E is the electric field, τ\tau is the average time between collisions and m is the mass of the electron. (a) How does the drift velocity change with a change in the potential difference across the conductor?
  3. (ii)(b)
    A copper wire of length l is connected to a source. If the copper wire is replaced by another copper wire of the same area of cross-section but of length 4l, how will the drift velocity change? Explain your answer.

Tests: Combinations of cells; drift velocity proportional to the field V/l.

Show solution

(i) Study the two circuits shown in Figure 6 (circuit 1: two cells, each of emf E and internal resistance r, in series with a load R; circuit 2: the same two cells in parallel, across the same load R). The cells in the two circuits are identical to each other. The resistance of the load resistor R is the same in both circuits. If the same current flows through the resistor R in both circuits, calculate the internal resistance of each cell in terms of the resistance of resistor R. Show your calculations.

  1. Series: Eeq=2EE_{eq} = 2E, req=2rr_{eq} = 2r, so I1=2ER+2rI_1 = \dfrac{2E}{R + 2r}.
  2. Parallel: Eeq=EE_{eq} = E, req=r2r_{eq} = \dfrac{r}{2}, so I2=ER+r/2=2E2R+rI_2 = \dfrac{E}{R + r/2} = \dfrac{2E}{2R + r}.
  3. I1=I2I_1 = I_2: R+2r=2R+r⇒r=RR + 2r = 2R + r \Rightarrow r = R.
Answerr = R (each cell's internal resistance equals the load).

(ii)(a) OR: The drift velocity of electrons in a conductor connected to a battery is given by v⃗d=−eE⃗τm\vec{v}_d = -\dfrac{e\vec{E}\tau}{m}. Here, e is the charge of the electron, E is the electric field, τ\tau is the average time between collisions and m is the mass of the electron. (a) How does the drift velocity change with a change in the potential difference across the conductor?

  1. For a conductor of length l: E=VlE = \dfrac{V}{l}, so vd=eVτml∝Vv_d = \dfrac{eV\tau}{ml} \propto V.
AnswerThe drift velocity is proportional to the potential difference: it increases as V increases.

(ii)(b) A copper wire of length l is connected to a source. If the copper wire is replaced by another copper wire of the same area of cross-section but of length 4l, how will the drift velocity change? Explain your answer.

  1. Same source (same V): E=VlE = \dfrac{V}{l}, so vd∝1lv_d \propto \dfrac{1}{l} (τ and m are the same for copper).
  2. Length 4l4l: vd′=vd4v_d' = \dfrac{v_d}{4}.
AnswerThe drift velocity becomes one quarter of its original value.
Ask about this question
Q11

Question 11 (3 marks)

Moving coil galvanometer
A galvanometer of resistance 100 Ω gives a full-scale deflection for a potential difference of 200 mV.
  1. (i)
    What must be the resistance connected to convert the galvanometer into an ammeter of the range 0-200 mA?
  2. (ii)
    Determine resistance of the ammeter.

Tests: Converting a galvanometer into an ammeter with a shunt.

Show solution

(i) What must be the resistance connected to convert the galvanometer into an ammeter of the range 0-200 mA?

  1. Full-scale current: Ig=VgG=0.2100=2×10−3 A=2 mAI_g = \dfrac{V_g}{G} = \dfrac{0.2}{100} = 2 \times 10^{-3}\ \text{A} = 2\ \text{mA}.
  2. A shunt S in parallel: S=IgGI−Ig=0.002×1000.2−0.002=0.20.198S = \dfrac{I_g G}{I - I_g} = \dfrac{0.002 \times 100}{0.2 - 0.002} = \dfrac{0.2}{0.198}.
  3. S=1.01 ΩS = 1.01\ \Omega (exactly 10099 Ω\dfrac{100}{99}\ \Omega), connected in parallel.
AnswerA shunt of about 1.01 Ω in parallel with the galvanometer.

(ii) Determine resistance of the ammeter.

  1. 1RA=1G+1S=1100+99100=1\dfrac{1}{R_A} = \dfrac{1}{G} + \dfrac{1}{S} = \dfrac{1}{100} + \dfrac{99}{100} = 1.
  2. RA=1 ΩR_A = 1\ \Omega. Check: at full scale the ammeter carries 200 mA with 200 mV across it, 0.20.2=1 Ω\dfrac{0.2}{0.2} = 1\ \Omega.

    Why: The specimen key rounds S to 1.01 Ω first and prints 0.999 Ω.

AnswerResistance of the ammeter = 1 Ω
Ask about this question
Q12

Question 12 (3 marks)

Magnetic effects of current
Answer (i) or (ii).
  1. (i)
    A student records the following data for the magnitudes (B) of the magnetic field at axial points at different distances x (Figure 7: a circular coil of radius a, centre O, carrying current I; P on the axis at distance x from O) from the centre O of a circular coil of radius a carrying a current I. Verify (for any two) that these observations are in good agreement with the expected theoretical values of B.
    xxx=0x = 0x=ax = ax=2ax = 2ax=3ax = 3a
    BBB0B_0B022\dfrac{B_0}{2\sqrt{2}}B055\dfrac{B_0}{5\sqrt{5}}B01010\dfrac{B_0}{10\sqrt{10}}
  2. (ii)(a)
    OR: An electron moving along positive X axis with a velocity of 8×107 m s−18 \times 10^7\ \text{m s}^{-1} enters a region having uniform magnetic field B=1.3×10−3 TB = 1.3 \times 10^{-3}\ \text{T} along positive Y axis. (a) Explain why the electron describes a circular path.
  3. (ii)(b)
    Calculate the radius of the circular path described by the electron.

Tests: Field on the axis of a circular coil; circular motion of a charge in a magnetic field.

Show solution

(i) A student records the following data for the magnitudes (B) of the magnetic field at axial points at different distances x (Figure 7: a circular coil of radius a, centre O, carrying current I; P on the axis at distance x from O) from the centre O of a circular coil of radius a carrying a current I. Verify (for any two) that these observations are in good agreement with the expected theoretical values of B.

  1. Field on the axis: B=μ0Ia22(a2+x2)3/2B = \dfrac{\mu_0 I a^2}{2(a^2 + x^2)^{3/2}}. At the centre (x=0x = 0): B0=μ0I2aB_0 = \dfrac{\mu_0 I}{2a}, so BB0=a3(a2+x2)3/2\dfrac{B}{B_0} = \dfrac{a^3}{(a^2 + x^2)^{3/2}}.
  2. x=ax = a: BB0=a3(2a2)3/2=122\dfrac{B}{B_0} = \dfrac{a^3}{(2a^2)^{3/2}} = \dfrac{1}{2\sqrt{2}}. Agrees.
  3. x=2ax = 2a: BB0=a3(5a2)3/2=155\dfrac{B}{B_0} = \dfrac{a^3}{(5a^2)^{3/2}} = \dfrac{1}{5\sqrt{5}}. Agrees.
  4. x=3ax = 3a: BB0=a3(10a2)3/2=11010\dfrac{B}{B_0} = \dfrac{a^3}{(10a^2)^{3/2}} = \dfrac{1}{10\sqrt{10}}. Agrees.
AnswerTheory gives B/B0=122,155,11010B/B_0 = \dfrac{1}{2\sqrt{2}}, \dfrac{1}{5\sqrt{5}}, \dfrac{1}{10\sqrt{10}} at x=a,2a,3ax = a, 2a, 3a: the observations agree.

(ii)(a) OR: An electron moving along positive X axis with a velocity of 8×107 m s−18 \times 10^7\ \text{m s}^{-1} enters a region having uniform magnetic field B=1.3×10−3 TB = 1.3 \times 10^{-3}\ \text{T} along positive Y axis. (a) Explain why the electron describes a circular path.

  1. The magnetic force F⃗=−e(v⃗×B⃗)\vec{F} = -e(\vec{v} \times \vec{B}) is always perpendicular to the velocity (here, initially along −Z), so it does no work: the speed stays constant and only the direction turns.
  2. A force of constant size always at right angles to the velocity is a centripetal force: the electron moves in a circle (in the XZ plane), with mv2r=evB\dfrac{mv^2}{r} = evB.
AnswerThe magnetic force is always perpendicular to the velocity and of constant magnitude, so it provides the centripetal force for uniform circular motion.

(ii)(b) Calculate the radius of the circular path described by the electron.

  1. evB=mv2r⇒r=mveBevB = \dfrac{mv^2}{r} \Rightarrow r = \dfrac{mv}{eB}.
  2. r=9.1×10−31×8×1071.6×10−19×1.3×10−3=7.28×10−232.08×10−22r = \dfrac{9.1 \times 10^{-31} \times 8 \times 10^7}{1.6 \times 10^{-19} \times 1.3 \times 10^{-3}} = \dfrac{7.28 \times 10^{-23}}{2.08 \times 10^{-22}}.
  3. r=0.35 mr = 0.35\ \text{m}
Answerr = 0.35 m
Ask about this question
Q13

Question 13 (3 marks)

Wave optics: Huygens' principle
With the help of a neatly drawn labelled diagram, prove the law of reflection on the basis of Huygen's wave theory.

Tests: Derive the law of reflection from Huygens' secondary wavelets.

Show solution
  1. Diagram: a plane wavefront AO strikes the reflecting surface obliquely, touching it first at O; A is the other end of the wavefront. Normals are drawn at O and O′; the incident rays make angle i with the normal, the reflected rays angle r.
  2. While the disturbance at A travels to O′ on the surface in time t (AO′=vtAO' = vt), the secondary wavelet from O spreads to radius vtvt. The tangent from O′ to this wavelet, touching it at B, is the reflected wavefront O′B, with OB=vtOB = vt.
  3. Triangles AOO′ and BO′O: OO′OO' is common, AO′=OB=vtAO' = OB = vt, and ∠OAO′=∠O′BO=90∘\angle OAO' = \angle O'BO = 90^\circ (a wavefront is perpendicular to its rays).
  4. So the triangles are congruent (RHS) and ∠AOO′=∠BO′O\angle AOO' = \angle BO'O. The first is the angle the incident wavefront makes with the surface, =i= i; the second, the reflected wavefront's angle with it, =r= r. Hence i=ri = r.
  5. The incident ray, the reflected ray and the normal all lie in the plane of the diagram: the second law of reflection.
AnswerThe congruent triangles AOO′ and BO′O give ∠i = ∠r: the angle of incidence equals the angle of reflection.
Ask about this question
Q14

Question 14 (3 marks)

Refraction through lenses
A lens of focal length f is divided into two equal parts and then these parts are put in a combination as shown in Figure 8 (an equiconvex lens L is cut by a plane perpendicular to its axis into two plano-convex halves L₁ and L₂; in the final combination L₁ and L₂ are placed with their curved faces touching at the centre and their plane faces outwards).
  1. (i)
    What is the focal length of L₁?
  2. (ii)
    What is the focal length of the final combination?

Tests: Focal length of a plano-convex half lens; thin lenses in contact.

Show solution

(i) What is the focal length of L₁?

  1. Whole lens: 1f=(μ−1)(1R+1R)=2(μ−1)R\dfrac{1}{f} = (\mu - 1)\left(\dfrac{1}{R} + \dfrac{1}{R}\right) = \dfrac{2(\mu - 1)}{R}.
  2. Plano-convex half (R2=∞R_2 = \infty): 1f1=(μ−1)1R=12f\dfrac{1}{f_1} = (\mu - 1)\dfrac{1}{R} = \dfrac{1}{2f}.
  3. f1=2ff_1 = 2f
AnswerFocal length of L₁ = 2f

(ii) What is the focal length of the final combination?

  1. L₂ is the same as L₁: f2=2ff_2 = 2f. Two thin lenses in contact: 1F=1f1+1f2=12f+12f\dfrac{1}{F} = \dfrac{1}{f_1} + \dfrac{1}{f_2} = \dfrac{1}{2f} + \dfrac{1}{2f}.
  2. F=fF = f: turning the halves round does not change the power of the pair.
AnswerFocal length of the combination = f
Ask about this question
Q15

Question 15 (3 marks)

Interference: Young's double slit
In Young's double slit experiment, how is interference pattern affected when the following changes are made:
  1. (i)
    Slits are brought closer to each other.
  2. (ii)
    Screen is moved away from the slits.
  3. (iii)
    Red coloured light is replaced with blue coloured light.

Tests: Fringe width β=λD/d\beta = \lambda D/d and how each factor changes it.

Show solution

(i) Slits are brought closer to each other.

  1. Fringe width β=λDd\beta = \dfrac{\lambda D}{d}. Bringing the slits closer reduces d, so β\beta increases.
AnswerThe fringe width increases (fringes spread out).

(ii) Screen is moved away from the slits.

  1. β=λDd\beta = \dfrac{\lambda D}{d}: moving the screen away increases D, so β\beta increases in proportion (the fringes also get fainter).
  2. The specimen answer key says the fringe width decreases; since β is proportional to D, it increases.
AnswerThe fringe width increases.

(iii) Red coloured light is replaced with blue coloured light.

  1. Blue light has a shorter wavelength than red: λ\lambda decreases, so β=λDd\beta = \dfrac{\lambda D}{d} decreases.
AnswerThe fringe width decreases (fringes come closer).
Ask about this question
Q16

Question 16 (3 marks)

Optical instruments
Answer both parts.
  1. (i)
    A virologist studies details of a virus with the help of an instrument. Name the instrument used by him.
  2. (ii)
    Draw a labelled ray diagram of an image formed by this instrument, assuming (a) a small upright object, (b) image lies at least distance of distinct vision.

Tests: Image formation in a compound microscope.

Show solution

(i) A virologist studies details of a virus with the help of an instrument. Name the instrument used by him.

  1. A tiny object is magnified in two stages, by an objective and an eyepiece: a compound microscope (the answer the specimen key gives, and the instrument (ii) asks you to draw).
  2. In practice most viruses (about 20-300 nm) are smaller than an optical microscope can resolve, so virologists use an electron microscope.
AnswerCompound microscope (in practice, an electron microscope for most viruses).

(ii) Draw a labelled ray diagram of an image formed by this instrument, assuming (a) a small upright object, (b) image lies at least distance of distinct vision.

  1. Draw the objective (short focal length) and the eyepiece on a common axis. Place the small upright object AB just beyond the objective's focus Fo.
  2. From A draw a ray parallel to the axis, refracted through Fo, and a ray through the optical centre of the objective, undeviated. They meet at A′: a real, inverted, magnified image A′B′, between the eyepiece and its focus Fe.
  3. From A′ draw two rays through the eyepiece (one through its optical centre); they diverge. Extend them backwards (dotted): they meet at A″, the final virtual, inverted, highly magnified image A″B″ at distance D = 25 cm from the eyepiece.
  4. Label: object AB, objective, eyepiece, Fo, Fe, intermediate image A′B′, final image A″B″, distance D, and the arrows on the rays.
AnswerRay diagram: object just beyond Fo of the objective; real inverted image A′B′ inside Fe of the eyepiece; final virtual, inverted, magnified image A″B″ at D = 25 cm.
Ask about this question
Q17

Question 17 (3 marks)

Photoelectric effect
The graphs below show the variation of the stopping potential VSV_S with the frequency (ν\nu) of the incident radiations for two different photosensitive materials M₁ and M₂ (two parallel straight lines; M₁ cuts the frequency axis at ν01\nu_{01}, M₂ at the larger ν02\nu_{02}). Express work function for M₁ and M₂ in terms of Planck's constant (h) and threshold frequency and charge of the electron (e). If the values of stopping potential for M₁ and M₂ are V1V_1 and V2V_2 respectively then show that the slope of the lines equals to V1−V2ν01−ν02\dfrac{V_1 - V_2}{\nu_{01} - \nu_{02}} for a frequency ν>ν02\nu > \nu_{02} and also ν>ν01\nu > \nu_{01}.

Tests: Read work function and h/e from stopping-potential graphs.

Show solution
  1. At the threshold frequency the photon just frees an electron: W1=hν01W_1 = h\nu_{01} and W2=hν02W_2 = h\nu_{02} (in joules), or hν01e\dfrac{h\nu_{01}}{e} and hν02e\dfrac{h\nu_{02}}{e} in electron-volts.
  2. Einstein's equation: eV=hν−hν0eV = h\nu - h\nu_0, so V1=heν−heν01V_1 = \dfrac{h}{e}\nu - \dfrac{h}{e}\nu_{01} and V2=heν−heν02V_2 = \dfrac{h}{e}\nu - \dfrac{h}{e}\nu_{02} at the same frequency ν\nu.
  3. Subtract: V1−V2=he(ν02−ν01)V_1 - V_2 = \dfrac{h}{e}(\nu_{02} - \nu_{01}).
  4. Slope of each line =he=V1−V2ν02−ν01= \dfrac{h}{e} = \dfrac{V_1 - V_2}{\nu_{02} - \nu_{01}}, the same for both materials.

    Why: The printed (V₁ − V₂)/(ν₀₁ − ν₀₂), and the key's working, carry a sign slip: V₁ > V₂ while ν₀₁ < ν₀₂, so that ratio is −h/e. In magnitude it is the slope.

AnswerW1=hν01W_1 = h\nu_{01}, W2=hν02W_2 = h\nu_{02} (that is hν0/eh\nu_0/e in eV); slope =he=V1−V2ν02−ν01= \dfrac{h}{e} = \dfrac{V_1 - V_2}{\nu_{02} - \nu_{01}}, equal in magnitude to the printed expression.
Ask about this question

Section D: 15 marks: three questions of five marks each; internal choice in two questions

Q18

Question 18 (5 marks)

Electromagnetic induction and AC circuits
Answer (i) or (ii).
  1. (i)(a)
    The magnetic field through a single loop of wire, 12 cm in radius and 8.5 Ω resistance, changes with time as shown in Figure 9 (B rises uniformly from 0 at t = 0 to 1.0 T at t = 2.0 s, stays at 1.0 T until t = 4.0 s, then falls uniformly to 0 at t = 6.0 s). The magnetic field is perpendicular to the plane of the loop. (a) Find the induced emf for the time intervals 0 to 2.0 s, 2.0 to 4.0 s, and 4.0 to 6.0 s.
  2. (i)(b)
    Hence, plot induced current as a function of time.
  3. (ii)(a)
    OR: Three students, X, Y and Z performed an experiment for studying the variation of a.c. with frequency in a series LCR circuit and obtained the graphs shown (current against frequency; all three peak at the same f₀; X has the highest, sharpest peak, Y a lower, broader one and Z the lowest and broadest). They all used an AC source of the same emf and inductance of the same value. (a) Who used minimum resistance?
  4. (ii)(b)
    In which case will the quality Q factor be maximum?
  5. (ii)(c)
    What did the students conclude about the nature of impedance at resonant frequency (f₀)?
  6. (ii)(d)
    An ideal capacitor is connected across 220 V, 50 Hz, and 220 V, 100 Hz supplies. Find the ratio of current flowing through it in the two cases.

Tests: Faraday's law with a changing field; resonance, Q factor and capacitive reactance in AC circuits.

Show solution

(i)(a) The magnetic field through a single loop of wire, 12 cm in radius and 8.5 Ω resistance, changes with time as shown in Figure 9 (B rises uniformly from 0 at t = 0 to 1.0 T at t = 2.0 s, stays at 1.0 T until t = 4.0 s, then falls uniformly to 0 at t = 6.0 s). The magnetic field is perpendicular to the plane of the loop. (a) Find the induced emf for the time intervals 0 to 2.0 s, 2.0 to 4.0 s, and 4.0 to 6.0 s.

  1. Faraday's law: e=−dϕdt=−AdBdte = -\dfrac{d\phi}{dt} = -A\dfrac{dB}{dt}, with A=πr2=π(0.12)2=4.52×10−2 m2A = \pi r^2 = \pi (0.12)^2 = 4.52 \times 10^{-2}\ \text{m}^2.
  2. 0 to 2.0 s: dBdt=1.02.0=0.5 T s−1\dfrac{dB}{dt} = \dfrac{1.0}{2.0} = 0.5\ \text{T s}^{-1}, e=−4.52×10−2×0.5=−0.0226 V≈−0.023 Ve = -4.52 \times 10^{-2} \times 0.5 = -0.0226\ \text{V} \approx -0.023\ \text{V}.
  3. 2.0 to 4.0 s: B is constant, so e = 0.
  4. 4.0 to 6.0 s: dBdt=−0.5 T s−1\dfrac{dB}{dt} = -0.5\ \text{T s}^{-1}, e=+0.0226 Ve = +0.0226\ \text{V}.
Answere = −0.023 V (0 to 2 s), 0 (2 to 4 s), +0.023 V (4 to 6 s)

(i)(b) Hence, plot induced current as a function of time.

  1. i=eR=0.02268.5=2.66×10−3 A≈2.7 mAi = \dfrac{e}{R} = \dfrac{0.0226}{8.5} = 2.66 \times 10^{-3}\ \text{A} \approx 2.7\ \text{mA} in magnitude.
  2. Graph (i in mA against t in s): a horizontal line at −2.7 mA from 0 to 2 s, zero from 2 to 4 s, a horizontal line at +2.7 mA from 4 to 6 s (a step graph).

    Why: The current reverses when the flux starts to fall (Lenz's law).

Answeri = −2.7 mA (0-2 s), 0 (2-4 s), +2.7 mA (4-6 s): rectangular steps.

(ii)(a) OR: Three students, X, Y and Z performed an experiment for studying the variation of a.c. with frequency in a series LCR circuit and obtained the graphs shown (current against frequency; all three peak at the same f₀; X has the highest, sharpest peak, Y a lower, broader one and Z the lowest and broadest). They all used an AC source of the same emf and inductance of the same value. (a) Who used minimum resistance?

  1. At resonance I0=VRI_0 = \dfrac{V}{R}: the highest peak means the least resistance.
  2. X has the highest peak, so X used the least resistance (Z the most).
AnswerX (least resistance); Z used the most.

(ii)(b) In which case will the quality Q factor be maximum?

  1. Q=ω0LRQ = \dfrac{\omega_0 L}{R}; L and ω0\omega_0 are the same for all three, so Q is largest for the least R: the sharpest curve.
AnswerX (sharpest resonance).

(ii)(c) What did the students conclude about the nature of impedance at resonant frequency (f₀)?

  1. At resonance XL=XCX_L = X_C, so Z=R2+(XL−XC)2=RZ = \sqrt{R^2 + (X_L - X_C)^2} = R: purely resistive and minimum; current and voltage are in phase.
AnswerAt resonance the impedance is minimum and purely resistive: Z = R.

(ii)(d) An ideal capacitor is connected across 220 V, 50 Hz, and 220 V, 100 Hz supplies. Find the ratio of current flowing through it in the two cases.

  1. XC=12πfCX_C = \dfrac{1}{2\pi f C}, so I=VXC=2πfCV∝fI = \dfrac{V}{X_C} = 2\pi f C V \propto f at the same V.
  2. I1I2=50100=12\dfrac{I_1}{I_2} = \dfrac{50}{100} = \dfrac{1}{2}
AnswerI₁ : I₂ = 1 : 2
Ask about this question
Q19

Question 19 (5 marks)

Nuclei and atoms
Answer (i) or (ii).
  1. (i)(a)
    Find the binding energy per nucleon of 92235U^{235}_{92}\text{U} based on the information given: mass of neutral 92235U^{235}_{92}\text{U} = 235.0439 u, mass of a proton = 1.0073 u, mass of a neutron = 1.0087 u (1 u = 931.5 MeV).
  2. (i)(b)
    Find the energy released during the following fission reaction: 92235U+01n→92236U→3690Kr+56143Ba+3 01n^{235}_{92}\text{U} + {}^{1}_{0}\text{n} \rightarrow {}^{236}_{92}\text{U} \rightarrow {}^{90}_{36}\text{Kr} + {}^{143}_{56}\text{Ba} + 3\,{}^{1}_{0}\text{n}. Masses: 235U^{235}\text{U} 235.0439 u, 90Kr^{90}\text{Kr} 89.9195 u, 143Ba^{143}\text{Ba} 142.9206 u, 1n^{1}\text{n} 1.0087 u.
  3. (i)(c)
    During Rutherford's gold foil experiment, it was observed that most of the α-particles did not deflect. However, some showed a deflection of 180°. What hypothesis was made to justify the deflection of α-particle by 180°?
  4. (ii)(a)
    OR: Define unified atomic mass unit.
  5. (ii)(b)
    Calculate its energy equivalent.
  6. (ii)(c)(1)
    In an atom X, electrons absorb the energy from an external source, which excites them from a lower energy level to a higher one; when they return to the ground state they emit photons. Figure 10 is the energy level diagram of atom X with three energy levels, E₁ = 0.00 eV, E₂ = 1.78 eV and E₃ = 2.95 eV (an arrow up from E₁ to E₃, a slanting arrow from E₃ down to E₂, and an arrow down from E₂ to E₁). The ground state is considered 0 eV for reference. The transition of electrons takes place between levels E₁ and E₂. (1) What wavelength of radiation is needed to excite the atom to energy level E₂ from E₁?
  7. (ii)(c)(2)
    Suppose the external source has a power of 100 W. What would be the rate of photon emission?

Tests: Mass defect, binding energy and Q value; Rutherford's nucleus; photon energy, wavelength and photon rate.

Show solution

(i)(a) Find the binding energy per nucleon of 92235U^{235}_{92}\text{U} based on the information given: mass of neutral 92235U^{235}_{92}\text{U} = 235.0439 u, mass of a proton = 1.0073 u, mass of a neutron = 1.0087 u (1 u = 931.5 MeV).

  1. Protons: 92×1.0073=92.6716 u92 \times 1.0073 = 92.6716\ \text{u}. Neutrons: (235−92)=143(235 - 92) = 143, 143×1.0087=144.2441 u143 \times 1.0087 = 144.2441\ \text{u}. Total: 236.9157 u236.9157\ \text{u}.
  2. Mass defect: Δm=236.9157−235.0439=1.8718 u\Delta m = 236.9157 - 235.0439 = 1.8718\ \text{u}.
  3. Binding energy: 1.8718×931.5=1743.6 MeV1.8718 \times 931.5 = 1743.6\ \text{MeV}.
  4. Per nucleon: 1743.6235=7.42 MeV\dfrac{1743.6}{235} = 7.42\ \text{MeV}.

    Why: With the data as given. Strictly the neutral atom also contains 92 electrons (about 0.05 u); allowing for them gives about 7.6 MeV per nucleon, the accepted value.

AnswerBinding energy 1743.6 MeV; binding energy per nucleon ≈ 7.42 MeV

(i)(b) Find the energy released during the following fission reaction: 92235U+01n→92236U→3690Kr+56143Ba+3 01n^{235}_{92}\text{U} + {}^{1}_{0}\text{n} \rightarrow {}^{236}_{92}\text{U} \rightarrow {}^{90}_{36}\text{Kr} + {}^{143}_{56}\text{Ba} + 3\,{}^{1}_{0}\text{n}. Masses: 235U^{235}\text{U} 235.0439 u, 90Kr^{90}\text{Kr} 89.9195 u, 143Ba^{143}\text{Ba} 142.9206 u, 1n^{1}\text{n} 1.0087 u.

  1. Reactants: 235.0439+1.0087=236.0526 u235.0439 + 1.0087 = 236.0526\ \text{u}.
  2. Products: 89.9195+142.9206+3(1.0087)=235.8662 u89.9195 + 142.9206 + 3(1.0087) = 235.8662\ \text{u}.
  3. Δm=236.0526−235.8662=0.1864 u\Delta m = 236.0526 - 235.8662 = 0.1864\ \text{u}, so Q=0.1864×931.5=173.6 MeVQ = 0.1864 \times 931.5 = 173.6\ \text{MeV}.
AnswerEnergy released Q ≈ 173.6 MeV

(i)(c) During Rutherford's gold foil experiment, it was observed that most of the α-particles did not deflect. However, some showed a deflection of 180°. What hypothesis was made to justify the deflection of α-particle by 180°?

  1. Turning a fast, heavy α-particle straight back needs a very strong repulsion from a massive positive charge in a very small space.
  2. Rutherford proposed that all the positive charge and nearly all the mass of the atom are concentrated in a tiny central nucleus; most of the atom is empty space (so most α-particles pass straight through).
AnswerThe entire positive charge (and almost all the mass) of the atom is concentrated in a tiny central core, the nucleus.

(ii)(a) OR: Define unified atomic mass unit.

  1. One unified atomic mass unit is 112\dfrac{1}{12} of the mass of one atom of the carbon-12 isotope, 1 u=1.66×10−27 kg1\ \text{u} = 1.66 \times 10^{-27}\ \text{kg}.
Answer1 u = 1/12 of the mass of one atom of carbon-12 (≈ 1.66 × 10⁻²⁷ kg).

(ii)(b) Calculate its energy equivalent.

  1. E=mc2=1.66×10−27×(3×108)2=1.49×10−10 JE = mc^2 = 1.66 \times 10^{-27} \times (3 \times 10^8)^2 = 1.49 \times 10^{-10}\ \text{J}.
  2. In MeV: 1.49×10−101.6×10−13≈931.5 MeV\dfrac{1.49 \times 10^{-10}}{1.6 \times 10^{-13}} \approx 931.5\ \text{MeV} (with the rounded c above it comes to about 934 MeV; the precise value, listed with the paper's constants, is 931.5 MeV).
Answer1 u ≡ 931.5 MeV (≈ 1.49 × 10⁻¹⁰ J)

(ii)(c)(1) In an atom X, electrons absorb the energy from an external source, which excites them from a lower energy level to a higher one; when they return to the ground state they emit photons. Figure 10 is the energy level diagram of atom X with three energy levels, E₁ = 0.00 eV, E₂ = 1.78 eV and E₃ = 2.95 eV (an arrow up from E₁ to E₃, a slanting arrow from E₃ down to E₂, and an arrow down from E₂ to E₁). The ground state is considered 0 eV for reference. The transition of electrons takes place between levels E₁ and E₂. (1) What wavelength of radiation is needed to excite the atom to energy level E₂ from E₁?

  1. ΔE=E2−E1=1.78 eV=1.78×1.6×10−19=2.848×10−19 J\Delta E = E_2 - E_1 = 1.78\ \text{eV} = 1.78 \times 1.6 \times 10^{-19} = 2.848 \times 10^{-19}\ \text{J}.
  2. λ=hcΔE=6.6×10−34×3×1082.848×10−19=6.95×10−7 m≈695 nm\lambda = \dfrac{hc}{\Delta E} = \dfrac{6.6 \times 10^{-34} \times 3 \times 10^8}{2.848 \times 10^{-19}} = 6.95 \times 10^{-7}\ \text{m} \approx 695\ \text{nm} (red).

    Why: With hc = 1240 eV nm the key gets 696.6 nm; it also quotes 420 nm for E₁ to E₃, which is not asked.

Answerλ ≈ 695 nm (6.95 × 10⁻⁷ m)

(ii)(c)(2) Suppose the external source has a power of 100 W. What would be the rate of photon emission?

  1. Energy of each photon (E₂ to E₁): 2.848×10−19 J2.848 \times 10^{-19}\ \text{J}.
  2. Photons per second =PE=1002.848×10−19=3.51×1020 s−1= \dfrac{P}{E} = \dfrac{100}{2.848 \times 10^{-19}} = 3.51 \times 10^{20}\ \text{s}^{-1}.
AnswerAbout 3.5 × 10²⁰ photons per second
Ask about this question
Q20

Question 20 (5 marks)

Semiconductor diodes
Sanya performed an experiment of obtaining characteristic curves of a junction diode. When she forward biased it, she found that beyond forward voltage V = Vₖ, the conductivity is very high. When she reverse biased the diode she found that a very small current (of about a few microamperes) flows in the diode. It remained constant even though she varied the voltage.
  1. (i)
    In Figure 11, which one of the diodes is forward biased? (Figure 11: from a terminal at −10 V, a 5 Ω resistor leads to a junction; from the junction, diode D₁ (arrow pointing away from the junction) and a 5 Ω resistor lead to a terminal at −5 V. Diode D₂ is connected across the first 5 Ω resistor, its arrow pointing from the junction towards the −10 V terminal.)
  2. (ii)
    What is meant by a saturation current?
  3. (iii)
    When applied voltage during forward bias is small, why does no current flow in the diode?
  4. (iv)
    The circuit shown in Figure 12 contains two diodes, each with a forward resistance of 50 Ω and with infinite resistance during reverse bias. If the battery voltage is 6 V, then calculate the current through the 100 Ω resistance. (Figure 12: the 6 V battery, positive terminal on the left, in series with a 100 Ω resistor along the bottom; two branches in parallel across the top: one with a diode pointing right (from the battery's positive side) and a 150 Ω resistor, the other with a diode pointing left and a 50 Ω resistor.)

Tests: Forward and reverse bias, saturation current, the potential barrier and diode circuits.

Show solution

(i) In Figure 11, which one of the diodes is forward biased? (Figure 11: from a terminal at −10 V, a 5 Ω resistor leads to a junction; from the junction, diode D₁ (arrow pointing away from the junction) and a 5 Ω resistor lead to a terminal at −5 V. Diode D₂ is connected across the first 5 Ω resistor, its arrow pointing from the junction towards the −10 V terminal.)

  1. A diode is forward biased when its p side (arrow tail) is at the higher potential. −5 V is higher than −10 V, so conventional current would flow from the −5 V end towards the −10 V end.
  2. D₁ points from the junction towards −5 V: its n side faces the higher potential, so D₁ is reverse biased.
  3. D₂ points from the junction (the side towards −5 V) to the −10 V terminal: its p side faces the higher potential, so D₂ is connected in forward bias.

    Why: Because D₁ blocks, no current actually flows, so strictly D₂ sits at zero bias; D₂ is the one in the forward direction, the specimen key's answer.

AnswerD₂ is forward biased (D₁ is reverse biased).

(ii) What is meant by a saturation current?

  1. In reverse bias only the minority carriers cross the junction; their number is fixed by temperature, so the small reverse current soon stops growing with voltage.
AnswerThe small reverse current (due to minority carriers) that stays constant even when the reverse voltage is increased (until breakdown).

(iii) When applied voltage during forward bias is small, why does no current flow in the diode?

  1. The depletion layer has a potential barrier (about 0.7 V for silicon, 0.3 V for germanium) opposing the diffusion of majority carriers.
  2. Until the forward voltage exceeds this barrier (the knee voltage Vₖ), almost no carriers cross the junction.
AnswerBecause of the potential barrier at the junction: the current rises only after the forward voltage exceeds it (the knee voltage).

(iv) The circuit shown in Figure 12 contains two diodes, each with a forward resistance of 50 Ω and with infinite resistance during reverse bias. If the battery voltage is 6 V, then calculate the current through the 100 Ω resistance. (Figure 12: the 6 V battery, positive terminal on the left, in series with a 100 Ω resistor along the bottom; two branches in parallel across the top: one with a diode pointing right (from the battery's positive side) and a 150 Ω resistor, the other with a diode pointing left and a 50 Ω resistor.)

  1. Current leaves the positive terminal on the left, so the diode pointing right (150 Ω branch) is forward biased and the diode pointing left (50 Ω branch) is reverse biased: that branch carries no current.
  2. Total resistance: 50+150+100=300 Ω50 + 150 + 100 = 300\ \Omega (the forward resistance of the diode included).
  3. I=ER=6300=0.02 AI = \dfrac{E}{R} = \dfrac{6}{300} = 0.02\ \text{A}
AnswerCurrent through the 100 Ω resistor = 0.02 A (20 mA)
Ask about this question

Questions are quoted from the ISC 2025 Physics Specimen Question Paper (861); figures are described in words. Every final answer is checked against the official CISCE answers. Where a question offers a choice, every option is solved.

CISCE specimen question papers and their answers are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Council for the Indian School Certificate Examinations. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CISCE.