AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2016 Paper 1: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2016 Paper 1 solved step by step: Physics, Chemistry and Mathematics, with the official answer key and the marking of each section. Every final answer is checked against the official answer key.

JEE (Advanced) 2016 Paper 1: 54 questions, 186 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2016: Paper 2.

Physics, Section 1: 5 questions, only one option correct: +3 if only the correct option is darkened, 0 if none is darkened, −1 in all other cases

Q1

Physics, Question 1 (3 marks)

Photoelectric effect · +3 / −1
In a historical experiment to determine Planck's constant, a metal surface was irradiated with light of different wavelengths. The emitted photoelectron energies were measured by applying a stopping potential. The relevant data for the wavelength (λ\lambda) of incident light and the corresponding stopping potential (V0V_0) are given below. Given that c=3×108 m s−1c = 3 \times 10^8\ \text{m s}^{-1} and e=1.6×10−19e = 1.6 \times 10^{-19} C, Planck's constant (in units of J s) found from such an experiment is
λ\lambda (μ\mum)V0V_0 (Volt)
0.32.0
0.41.0
0.50.4
  1. (A)6.0×10−346.0 \times 10^{-34}
  2. (B)6.4×10−346.4 \times 10^{-34}
  3. (C)6.6×10−346.6 \times 10^{-34}
  4. (D)6.8×10−346.8 \times 10^{-34}

Tests: Find Planck's constant from the slope of stopping potential against 1/λ.

Show solution
  1. Einstein's equation: eV0=hcλ−ϕeV_0 = \dfrac{hc}{\lambda} - \phi. The work function ϕ\phi cancels when two readings are subtracted.
  2. Using λ=0.3\lambda = 0.3 and 0.4 μ0.4\ \mum: e(2.0−1.0)=hc(10.3−10.4)×106 m−1=hc×1061.2e(2.0 - 1.0) = hc\left(\dfrac{1}{0.3} - \dfrac{1}{0.4}\right) \times 10^6\ \text{m}^{-1} = hc \times \dfrac{10^6}{1.2}.
  3. h=1.6×10−19×1.23×108×106=6.4×10−34h = \dfrac{1.6 \times 10^{-19} \times 1.2}{3 \times 10^8 \times 10^6} = 6.4 \times 10^{-34} J s.
  4. Check with 0.40.4 and 0.5 μ0.5\ \mum: e(0.6)=hc×0.5×106e(0.6) = hc \times 0.5 \times 10^6, so h=0.96×10−191.5×1014=6.4×10−34h = \dfrac{0.96 \times 10^{-19}}{1.5 \times 10^{14}} = 6.4 \times 10^{-34} J s. The data are consistent.

    Why: All three points lie on one straight line of V0 against 1/λ.

AnswerAnswer: (B) 6.4×10−346.4 \times 10^{-34} J s
Ask about this question
Q2

Physics, Question 2 (3 marks)

Equilibrium of a rigid body (ladder problem) · +3 / −1
A uniform wooden stick of mass 1.6 kg and length ll rests in an inclined manner on a smooth, vertical wall of height h (<l)h\ (< l) such that a small portion of the stick extends beyond the wall. The reaction force of the wall on the stick is perpendicular to the stick. The stick makes an angle of 30∘30^\circ with the wall and the bottom of the stick is on a rough floor. The reaction of the wall on the stick is equal in magnitude to the reaction of the floor on the stick. The ratio h/lh/l and the frictional force ff at the bottom of the stick are (g=10 m s−2g = 10\ \text{m s}^{-2})
  1. (A)hl=316, f=1633\dfrac{h}{l} = \dfrac{\sqrt{3}}{16},\ f = \dfrac{16\sqrt{3}}{3} N
  2. (B)hl=316, f=1633\dfrac{h}{l} = \dfrac{3}{16},\ f = \dfrac{16\sqrt{3}}{3} N
  3. (C)hl=3316, f=833\dfrac{h}{l} = \dfrac{3\sqrt{3}}{16},\ f = \dfrac{8\sqrt{3}}{3} N
  4. (D)hl=3316, f=1633\dfrac{h}{l} = \dfrac{3\sqrt{3}}{16},\ f = \dfrac{16\sqrt{3}}{3} N

Tests: Balance forces and torques on a stick leaning on a wall edge, with the wall's push normal to the stick.

Show solution
  1. The stick makes 30∘30^\circ with the vertical wall, so 60∘60^\circ with the floor. The wall's reaction NwN_w is perpendicular to the stick: it has a horizontal part Nwcos⁡30∘N_w\cos 30^\circ and an upward part Nwsin⁡30∘N_w\sin 30^\circ.

    Why: The force is normal to the stick, and the stick is 60° from horizontal.

  2. Vertical balance with the floor's normal reaction N=NwN = N_w: N+Nwsin⁡30∘=mg⇒32N=16⇒N=Nw=323N + N_w\sin 30^\circ = mg \Rightarrow \tfrac32 N = 16 \Rightarrow N = N_w = \dfrac{32}{3} N.
  3. Horizontal balance: f=Nwcos⁡30∘=323⋅32=1633f = N_w\cos 30^\circ = \dfrac{32}{3} \cdot \dfrac{\sqrt3}{2} = \dfrac{16\sqrt3}{3} N.
  4. Torque about the bottom end: the wall touches the stick at distance s=h/cos⁡30∘s = h/\cos 30^\circ along it, so Nws=mg⋅l2cos⁡60∘=16⋅l4=4lN_w s = mg \cdot \dfrac{l}{2}\cos 60^\circ = 16 \cdot \dfrac{l}{4} = 4l, giving s=4l32/3=3l8s = \dfrac{4l}{32/3} = \dfrac{3l}{8}.
  5. h=scos⁡30∘=3l8⋅32h = s\cos 30^\circ = \dfrac{3l}{8} \cdot \dfrac{\sqrt3}{2}, so hl=3316\dfrac{h}{l} = \dfrac{3\sqrt3}{16}.
AnswerAnswer: (D) hl=3316, f=1633\dfrac{h}{l} = \dfrac{3\sqrt{3}}{16},\ f = \dfrac{16\sqrt{3}}{3} N
Ask about this question
Q3

Physics, Question 3 (3 marks)

Calorimetry (heat balance with a cooler) · +3 / −1
A water cooler of storage capacity 120 litres can cool water at a constant rate of PP watts. In a closed circulation system (as shown schematically in the figure), the water from the cooler is used to cool an external device that generates constantly 3 kW of heat (thermal load). The temperature of water fed into the device cannot exceed 30 ∘C30\ ^\circ\text{C} and the entire stored 120 litres of water is initially cooled to 10 ∘C10\ ^\circ\text{C}. The entire system is thermally insulated. The minimum value of PP (in watts) for which the device can be operated for 3 hours is (Specific heat of water is 4.2 kJ kg−1K−14.2\ \text{kJ kg}^{-1}\text{K}^{-1} and the density of water is 1000 kg m−31000\ \text{kg m}^{-3}) (The figure shows the cooler tank on the left and the device on the right, joined by two pipes: cold water flows from the cooler to the device through the lower pipe, passes through a coil inside the device, and returns hot to the cooler through the upper pipe.)
  1. (A)1600
  2. (B)2067
  3. (C)2533
  4. (D)3933

Tests: Use an energy balance: heat in = heat stored in the water + heat removed by the cooler.

Show solution
  1. Heat the device puts into the water in 3 hours: 3000×3×3600=32.4×1063000 \times 3 \times 3600 = 32.4 \times 10^6 J.
  2. The 120 kg of water may warm from 10 ∘10\ ^\circC to at most 30 ∘30\ ^\circC, absorbing 120×4200×20=10.08×106120 \times 4200 \times 20 = 10.08 \times 10^6 J.

    Why: The whole stored water is the buffer: at the end of 3 hours it is just at 30 °C.

  3. The cooler must remove the rest: 32.4×106−10.08×106=22.32×10632.4 \times 10^6 - 10.08 \times 10^6 = 22.32 \times 10^6 J in 1080010800 s.
  4. Pmin=22.32×10610800≈2067P_{min} = \dfrac{22.32 \times 10^6}{10800} \approx 2067 W.
AnswerAnswer: (B) 2067 W
Ask about this question
Q4

Physics, Question 4 (3 marks)

Refraction through a prism and total internal reflection · +3 / −1
A parallel beam of light is incident from air at an angle α\alpha on the side PQ of a right angled triangular prism of refractive index n=2n = \sqrt{2}. Light undergoes total internal reflection in the prism at the face PR when α\alpha has a minimum value of 45∘45^\circ. The angle θ\theta of the prism is (The figure shows the prism with PQ vertical, Q at the bottom left with the right angle, QR horizontal along the base and PR the slanting hypotenuse; θ\theta is the angle at the top vertex P between PQ and PR. The ray comes from the upper left and strikes PQ moving down and to the right, α\alpha measured from the horizontal normal to PQ.)
  1. (A)15∘15^\circ
  2. (B)22.5∘22.5^\circ
  3. (C)30∘30^\circ
  4. (D)45∘45^\circ

Tests: Link the refraction angle at the first face to the incidence angle at the second face and apply the TIR condition.

Show solution
  1. Refraction at PQ for α=45∘\alpha = 45^\circ: sin⁡45∘=2sin⁡r⇒sin⁡r=12\sin 45^\circ = \sqrt2 \sin r \Rightarrow \sin r = \tfrac12, r=30∘r = 30^\circ. The ray inside slopes down at 30∘30^\circ below the horizontal.
  2. The normal to PR makes angle θ\theta with the horizontal (PR makes θ\theta with the vertical PQ). The angle of incidence on PR is therefore i=r+θi = r + \theta.

    Why: Rotate the face by θ from vertical and its normal rotates by θ from horizontal.

  3. Critical angle: sin⁡C=12\sin C = \dfrac{1}{\sqrt2}, C=45∘C = 45^\circ. TIR needs i≥45∘i \ge 45^\circ.
  4. A smaller α\alpha gives a smaller rr and a smaller ii, so the minimum α\alpha for TIR is when i=Ci = C exactly: 30∘+θ=45∘⇒θ=15∘30^\circ + \theta = 45^\circ \Rightarrow \theta = 15^\circ.
AnswerAnswer: (A) 15∘15^\circ
Ask about this question
Q5

Physics, Question 5 (3 marks)

Current electricity (charge relaxation in a conductor) · +3 / −1
An infinite line charge of uniform electric charge density λ\lambda lies along the axis of an electrically conducting infinite cylindrical shell of radius RR. At time t=0t = 0, the space inside the cylinder is filled with a material of permittivity ε\varepsilon and electrical conductivity σ\sigma. The electrical conduction in the material follows Ohm's law. Which one of the following graphs best describes the subsequent variation of the magnitude of current density j(t)j(t) at any point in the material?
  1. (A)j(t)j(t) starts at a finite value at t=0t = 0 and falls along a straight line to zero at a finite time.
  2. (B)j(t)j(t) stays flat near its initial value for a while, then falls steeply and levels off to zero (an S-shaped fall).
  3. (C)j(t)j(t) starts at its largest value at t=0t = 0 and decays steeply at first, then more slowly, approaching zero (exponential decay).
  4. (D)j(t)j(t) starts at its largest value and decays, levelling off at a non-zero constant value (dotted line).

Tests: See that free charge in an ohmic conductor relaxes exponentially with time constant ε/σ.

Show solution
  1. At a distance rr from the axis, Gauss's law in the material: E=λ(t)2πεrE = \dfrac{\lambda(t)}{2\pi\varepsilon r}, and Ohm's law gives j=σE=σλ(t)2πεrj = \sigma E = \dfrac{\sigma\lambda(t)}{2\pi\varepsilon r}, flowing radially outward.
  2. The charge on the axis drains out at the rate the current crosses a cylinder of radius rr (unit length): dλdt=−2πrj=−σελ\dfrac{d\lambda}{dt} = -2\pi r j = -\dfrac{\sigma}{\varepsilon}\lambda.

    Why: Charge conservation: what leaves the axis passes through every coaxial surface.

  3. So λ(t)=λe−σt/ε\lambda(t) = \lambda e^{-\sigma t/\varepsilon} and j(t)=σλ2πεre−t/τj(t) = \dfrac{\sigma\lambda}{2\pi\varepsilon r}e^{-t/\tau} with τ=ε/σ\tau = \varepsilon/\sigma.
  4. jj is largest at t=0t = 0 and decays exponentially to zero: graph (C). Not (D), because once all the charge reaches the shell there is no field inside; not (A) or (B), which are not exponential.
AnswerAnswer: (C) exponential decay of j(t)j(t) to zero
Ask about this question

Physics, Section 2: 8 questions, one or more options correct: +4 if all the correct options (and only those) are darkened; +1 for each correct option darkened, provided no incorrect option is darkened; 0 if none is darkened; −2 in all other cases

Q6

Physics, Question 6 (4 marks)

Bohr model (Rydberg states) · +4 / −2
Highly excited states for hydrogen-like atoms (also called Rydberg states) with nuclear charge ZeZe are defined by their principal quantum number nn, where n≫1n \gg 1. Which of the following statement(s) is(are) true?
  1. (A)Relative change in the radii of two consecutive orbitals does not depend on ZZ
  2. (B)Relative change in the radii of two consecutive orbitals varies as 1/n1/n
  3. (C)Relative change in the energy of two consecutive orbitals varies as 1/n31/n^3
  4. (D)Relative change in the angular momenta of two consecutive orbitals varies as 1/n1/n

Tests: Use Bohr's n and Z dependences to find relative changes between neighbouring orbits.

Show solution
  1. Bohr results: rn∝n2Zr_n \propto \dfrac{n^2}{Z}, En∝−Z2n2E_n \propto -\dfrac{Z^2}{n^2}, Ln=nh2πL_n = \dfrac{nh}{2\pi}.
  2. Radii: rn+1−rnrn=(n+1)2−n2n2=2n+1n2≈2n\dfrac{r_{n+1} - r_n}{r_n} = \dfrac{(n+1)^2 - n^2}{n^2} = \dfrac{2n+1}{n^2} \approx \dfrac{2}{n}. ZZ cancels, so (A) true, and it varies as 1/n1/n, so (B) true.
  3. Energy: En+1−EnEn=n2(n+1)2−1≈−2n\dfrac{E_{n+1} - E_n}{E_n} = \dfrac{n^2}{(n+1)^2} - 1 \approx -\dfrac{2}{n}, which varies as 1/n1/n, not 1/n31/n^3. (C) false.

    Why: The absolute gap ΔE goes as 1/n³; the relative change does not.

  4. Angular momentum: Ln+1−LnLn=1n\dfrac{L_{n+1} - L_n}{L_n} = \dfrac{1}{n}. (D) true.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Doppler effect and beats · +4 / −2
Two loudspeakers MM and NN are located 20 m apart and emit sound at frequencies 118 Hz and 121 Hz, respectively. A car is initially at a point PP, 1800 m away from the midpoint QQ of the line MNMN and moves towards QQ constantly at 60 km/hr along the perpendicular bisector of MNMN. It crosses QQ and eventually reaches a point RR, 1800 m away from QQ. Let ν(t)\nu(t) represent the beat frequency measured by a person sitting in the car at time tt. Let νP\nu_P, νQ\nu_Q and νR\nu_R be the beat frequencies measured at locations PP, QQ and RR, respectively. The speed of sound in air is 330 m s−1330\ \text{m s}^{-1}. Which of the following statement(s) is(are) true regarding the sound heard by the person?
  1. (A)νP+νR=2νQ\nu_P + \nu_R = 2\nu_Q
  2. (B)The rate of change in beat frequency is maximum when the car passes through QQ
  3. (C)The plot below represents schematically the variation of beat frequency with time: (The graph shows ν(t)\nu(t) nearly flat at a high value from PP, then falling steeply through the level νQ\nu_Q at QQ, then levelling off flat at a low value up to RR, an S-shaped fall.)
  4. (D)The plot below represents schematically the variation of beat frequency with time: (The graph shows ν(t)\nu(t) falling steeply from PP, flattening to nearly level as it passes νQ\nu_Q at QQ, then falling steeply again towards RR.)

Tests: Apply the moving-observer Doppler formula with the angle to each source and track the beat frequency.

Show solution
  1. Both speakers are at the same angle θ\theta to the car's path (the car is on the bisector). Moving observer: f′=f(1±vcos⁡θc)f' = f\left(1 \pm \dfrac{v\cos\theta}{c}\right), + while approaching, − while receding.
  2. Beat frequency: ν=121(1±vcos⁡θc)−118(1±vcos⁡θc)=3(1±vcos⁡θc)\nu = 121\left(1 \pm \dfrac{v\cos\theta}{c}\right) - 118\left(1 \pm \dfrac{v\cos\theta}{c}\right) = 3\left(1 \pm \dfrac{v\cos\theta}{c}\right). At QQ, cos⁡θ=0\cos\theta = 0, so νQ=3\nu_Q = 3 Hz.
  3. At PP and RR the angle is the same (cos⁡θ≈1\cos\theta \approx 1, since 1800 m ≫ 10 m): νP=3(1+v/c)\nu_P = 3(1 + v/c), νR=3(1−v/c)\nu_R = 3(1 - v/c), so νP+νR=6=2νQ\nu_P + \nu_R = 6 = 2\nu_Q. (A) true.
  4. With xx the car's distance from QQ, cos⁡θ=xx2+102\cos\theta = \dfrac{x}{\sqrt{x^2 + 10^2}}. This stays near ±1\pm 1 far away and swings from +1+1 to −1-1 only within tens of metres of QQ, where it changes fastest. (B) true.

    Why: The steepest part of x/√(x² + 100) is at x = 0.

  5. So ν(t)\nu(t) is flat at 3(1+v/c)3(1 + v/c), drops steeply through νQ\nu_Q at QQ, then flat at 3(1−v/c)3(1 - v/c): the S-shaped curve. (C) true. Graph (D) is flattest at QQ, the opposite. (D) false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q8

Physics, Question 8 (4 marks)

Heating effect of current and black-body radiation · +4 / −2
An incandescent bulb has a thin filament of tungsten that is heated to high temperature by passing an electric current. The hot filament emits black-body radiation. The filament is observed to break up at random locations after a sufficiently long time of operation due to non-uniform evaporation of tungsten from the filament. If the bulb is powered at constant voltage, which of the following statement(s) is(are) true?
  1. (A)The temperature distribution over the filament is uniform
  2. (B)The resistance over small sections of the filament decreases with time
  3. (C)The filament emits more light at higher band of frequencies before it breaks up
  4. (D)The filament consumes less electrical power towards the end of the life of the bulb

Tests: Connect thinning of a wire to its resistance, temperature, emitted spectrum and power at fixed voltage.

Show solution
  1. Evaporation is non-uniform, so some sections get thinner. A thinner section has larger resistance R=ρl/AR = \rho l/A and, carrying the same current, dissipates more heat I2RI^2R from less surface: it runs hotter. The temperature is not uniform. (A) false.
  2. As sections thin, AA falls and RR of each small section rises (and ρ\rho of tungsten also rises with temperature). (B) false.
  3. Just before break-up the thinnest spots are hottest. By Wien's law the peak of black-body emission moves to higher frequency as TT rises, so the filament emits more at higher frequencies. (C) true.

    Why: λ_max T = constant: hotter means bluer.

  4. The total resistance of the filament grows with time; at constant voltage the power P=V2/RP = V^2/R falls. (D) true.
AnswerAnswer: (C), (D)
Ask about this question
Q9

Physics, Question 9 (4 marks)

Lenses and mirrors (plano-convex lens) · +4 / −2
A plano-convex lens is made of a material of refractive index nn. When a small object is placed 30 cm away in front of the curved surface of the lens, an image of double the size of the object is produced. Due to reflection from the convex surface of the lens, another faint image is observed at a distance of 10 cm away from the lens. Which of the following statement(s) is(are) true?
  1. (A)The refractive index of the lens is 2.5
  2. (B)The radius of curvature of the convex surface is 45 cm
  3. (C)The faint image is erect and real
  4. (D)The focal length of the lens is 20 cm

Tests: Use the reflected image to find R, then the refracted image to find f and n.

Show solution
  1. Reflection: the convex surface acts as a convex mirror, which always forms a virtual, erect image behind it. With u=−30u = -30 cm, v=+10v = +10 cm: 1fm=110−130=115\dfrac{1}{f_m} = \dfrac{1}{10} - \dfrac{1}{30} = \dfrac{1}{15}, so fm=15f_m = 15 cm and R=2fm=30R = 2f_m = 30 cm. (B) false, and the faint image is virtual. (C) false.
  2. Refraction, image twice the size. Taking the real (inverted) image, v=2×30=60v = 2 \times 30 = 60 cm: 1f=160+130=120\dfrac{1}{f} = \dfrac{1}{60} + \dfrac{1}{30} = \dfrac{1}{20}, so f=20f = 20 cm. (D) true.
  3. Lens maker's formula for a plano-convex lens: 1f=n−1R⇒120=n−130⇒n=2.5\dfrac{1}{f} = \dfrac{n-1}{R} \Rightarrow \dfrac{1}{20} = \dfrac{n-1}{30} \Rightarrow n = 2.5. (A) true.
  4. (The virtual-image reading, v=−60v = -60 cm, gives f=60f = 60 cm and n=1.5n = 1.5, which matches neither (A) nor (D); the paper intends the real image.)

    Why: With a 2x image either reading is possible in principle; only the real one fits the options.

AnswerAnswer: (A), (D)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Units and dimensions · +4 / −2
A length-scale (ll) depends on the permittivity (ε\varepsilon) of a dielectric material, Boltzmann constant (kBk_B), the absolute temperature (TT), the number per unit volume (nn) of certain charged particles, and the charge (qq) carried by each of the particles. Which of the following expression(s) for ll is(are) dimensionally correct?
  1. (A)l=(nq2εkBT)l = \sqrt{\left(\dfrac{nq^2}{\varepsilon k_B T}\right)}
  2. (B)l=(εkBTnq2)l = \sqrt{\left(\dfrac{\varepsilon k_B T}{nq^2}\right)}
  3. (C)l=(q2εn2/3kBT)l = \sqrt{\left(\dfrac{q^2}{\varepsilon n^{2/3} k_B T}\right)}
  4. (D)l=(q2εn1/3kBT)l = \sqrt{\left(\dfrac{q^2}{\varepsilon n^{1/3} k_B T}\right)}

Tests: Check dimensions quickly by grouping q²/(εk_BT) as a length.

Show solution
  1. kBTk_B T is an energy, and so is q24πεr\dfrac{q^2}{4\pi\varepsilon r}. Hence [q2εkBT]=L\left[\dfrac{q^2}{\varepsilon k_B T}\right] = \text{L}, and [n]=L−3[n] = \text{L}^{-3}.

    Why: Coulomb's potential energy gives ε a link between charge², energy and length.

  2. (A): nq2εkBT=L−3⋅L=L−2\dfrac{nq^2}{\varepsilon k_B T} = \text{L}^{-3}\cdot\text{L} = \text{L}^{-2}, so ll would be L−1\text{L}^{-1}. False.
  3. (B): εkBTnq2=L3⋅L−1=L2\dfrac{\varepsilon k_B T}{nq^2} = \text{L}^{3}\cdot\text{L}^{-1} = \text{L}^2, so ll has dimension L. True (this is the Debye length).
  4. (C): q2εkBT⋅n−2/3=L⋅L2=L3\dfrac{q^2}{\varepsilon k_B T}\cdot n^{-2/3} = \text{L}\cdot\text{L}^{2} = \text{L}^3, giving L3/2\text{L}^{3/2}. False.
  5. (D): q2εkBT⋅n−1/3=L⋅L=L2\dfrac{q^2}{\varepsilon k_B T}\cdot n^{-1/3} = \text{L}\cdot\text{L} = \text{L}^2, giving L. True.
AnswerAnswer: (B), (D)
Ask about this question
Q11

Physics, Question 11 (4 marks)

Electromagnetic induction (mutual inductance) · +4 / −2
A conducting loop in the shape of a right angled isosceles triangle of height 10 cm is kept such that the 90∘90^\circ vertex is very close to an infinitely long conducting wire (see the figure). The wire is electrically insulated from the loop. The hypotenuse of the triangle is parallel to the wire. The current in the triangular loop is in counterclockwise direction and increased at a constant rate of 10 A s−110\ \text{A s}^{-1}. Which of the following statement(s) is(are) true? (The figure shows a horizontal wire with the triangle hanging below it: the right-angle vertex touches the wire at the top and the hypotenuse is horizontal, 10 cm below the wire.)
  1. (A)The magnitude of induced emf in the wire is (μ0π)\left(\dfrac{\mu_0}{\pi}\right) volt
  2. (B)If the loop is rotated at a constant angular speed about the wire, an additional emf of (μ0π)\left(\dfrac{\mu_0}{\pi}\right) volt is induced in the wire
  3. (C)The induced current in the wire is in opposite direction to the current along the hypotenuse
  4. (D)There is a repulsive force between the wire and the loop

Tests: Find mutual inductance between a wire and a triangle, then use Lenz's law for the direction and force.

Show solution
  1. Mutual inductance from the wire's field through the loop: at depth xx below the wire the triangle is 2x2x wide (legs at 45∘45^\circ). Φ=∫0hμ0I2πx 2x dx=μ0Ihπ\Phi = \displaystyle\int_0^{h} \dfrac{\mu_0 I}{2\pi x}\,2x\,dx = \dfrac{\mu_0 I h}{\pi}, so M=μ0hπM = \dfrac{\mu_0 h}{\pi}.

    Why: M is the same whichever circuit carries the current, so use the easy one.

  2. EMF in the wire: MdIdt=μ0×0.1π×10=μ0πM\dfrac{dI}{dt} = \dfrac{\mu_0 \times 0.1}{\pi} \times 10 = \dfrac{\mu_0}{\pi} V. (A) true.
  3. Rotating the loop about the wire does not change its shape or distances from the wire, so MM is unchanged and no additional emf arises. (B) false.
  4. Counterclockwise current gives flux out of the page through the loop, and it is growing. The wire's induced current must send flux into the page through the loop (below the wire), which needs a current to the right. The hypotenuse current (counterclockwise, along the bottom edge) also runs to the right: same direction. (C) false.
  5. Force: the hypotenuse (parallel current, 10 cm away) is attracted. Each leg's current has a component against the wire's current and the legs reach right up to the wire, where the field ∝1/x\propto 1/x is huge; their repulsion grows like ln⁡(h/gap)\ln(h/\text{gap}) and wins. Net force repulsive. (D) true.
AnswerAnswer: (A), (D)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Kinematics, force, torque and angular momentum (vectors) · +4 / −2
The position vector r⃗\vec r of a particle of mass mm is given by the following equation r⃗(t)=αt3i^+βt2j^\vec r(t) = \alpha t^3\hat i + \beta t^2\hat j, where α=10/3 m s−3\alpha = 10/3\ \text{m s}^{-3}, β=5 m s−2\beta = 5\ \text{m s}^{-2} and m=0.1m = 0.1 kg. At t=1t = 1 s, which of the following statement(s) is(are) true about the particle?
  1. (A)The velocity v⃗\vec v is given by v⃗=(10i^+10j^) m s−1\vec v = (10\hat i + 10\hat j)\ \text{m s}^{-1}
  2. (B)The angular momentum L⃗\vec L with respect to the origin is given by L⃗=−(5/3)k^\vec L = -(5/3)\hat k N m s
  3. (C)The force F⃗\vec F is given by F⃗=(i^+2j^)\vec F = (\hat i + 2\hat j) N
  4. (D)The torque τ⃗\vec\tau with respect to the origin is given by τ⃗=−(20/3)k^\vec\tau = -(20/3)\hat k N m

Tests: Differentiate a position vector and use cross products for angular momentum and torque.

Show solution
  1. At t=1t = 1: r⃗=103i^+5j^\vec r = \tfrac{10}{3}\hat i + 5\hat j; v⃗=3αt2i^+2βtj^=10i^+10j^\vec v = 3\alpha t^2\hat i + 2\beta t\hat j = 10\hat i + 10\hat j. (A) true.
  2. L⃗=m(r⃗×v⃗)=0.1(103⋅10−5⋅10)k^=0.1(−503)k^=−53k^\vec L = m(\vec r \times \vec v) = 0.1\left(\tfrac{10}{3}\cdot 10 - 5\cdot 10\right)\hat k = 0.1\left(-\tfrac{50}{3}\right)\hat k = -\tfrac53\hat k N m s. (B) true.
  3. a⃗=6αti^+2βj^=20i^+10j^\vec a = 6\alpha t\hat i + 2\beta\hat j = 20\hat i + 10\hat j, so F⃗=ma⃗=(2i^+j^)\vec F = m\vec a = (2\hat i + \hat j) N, not (i^+2j^)(\hat i + 2\hat j). (C) false.
  4. τ⃗=r⃗×F⃗=(103⋅1−5⋅2)k^=−203k^\vec\tau = \vec r \times \vec F = \left(\tfrac{10}{3}\cdot 1 - 5\cdot 2\right)\hat k = -\tfrac{20}{3}\hat k N m. (D) true.

    Why: For vectors in the xy-plane, (a_x î + a_y ĵ) × (b_x î + b_y ĵ) = (a_x b_y − a_y b_x) k̂.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Refraction (medium of varying refractive index) · +4 / −2
A transparent slab of thickness dd has a refractive index n(z)n(z) that increases with zz. Here zz is the vertical distance inside the slab, measured from the top. The slab is placed between two media with uniform refractive indices n1n_1 and n2 (>n1)n_2\ (> n_1), as shown in the figure. A ray of light is incident with angle θi\theta_i from medium 1 and emerges in medium 2 with refraction angle θf\theta_f with a lateral displacement ll. Which of the following statement(s) is(are) true? (The figure shows medium 1 above the horizontal slab and medium 2 below it. The ray strikes the top face at angle θi\theta_i to the vertical and leaves the bottom face at angle θf\theta_f to the vertical; ll is the horizontal distance, along the bottom face, between the vertical dashed line through the point of incidence and the point where the ray leaves the slab.)
  1. (A)n1sin⁡θi=n2sin⁡θfn_1\sin\theta_i = n_2\sin\theta_f
  2. (B)n1sin⁡θi=(n2−n1)sin⁡θfn_1\sin\theta_i = (n_2 - n_1)\sin\theta_f
  3. (C)ll is independent of n2n_2
  4. (D)ll is dependent on n(z)n(z)

Tests: Use the invariance of n sin θ across layered media and see what decides the path inside the slab.

Show solution
  1. Treat the slab as many thin horizontal layers. Snell's law at every boundary keeps nsin⁡θn\sin\theta constant: n1sin⁡θi=n(z)sin⁡θ(z)=n2sin⁡θfn_1\sin\theta_i = n(z)\sin\theta(z) = n_2\sin\theta_f. (A) true, so (B) false.
  2. Inside the slab the ray's slope at depth zz is set by sin⁡θ(z)=n1sin⁡θin(z)\sin\theta(z) = \dfrac{n_1\sin\theta_i}{n(z)}, and l=∫0dtan⁡θ(z) dzl = \displaystyle\int_0^d \tan\theta(z)\,dz.
  3. This integral uses only n1n_1, θi\theta_i, dd and n(z)n(z). n2n_2 only decides the direction after the ray leaves the slab. (C) true.

    Why: l is measured at the bottom face, before the ray enters medium 2.

  4. ll changes if the profile n(z)n(z) changes. (D) true.
AnswerAnswer: (A), (C), (D)
Ask about this question

Physics, Section 3: 5 questions, answer a single digit integer from 0 to 9: +3 if only the correct answer is darkened, 0 in all other cases (no negative marks)

Q14

Physics, Question 14 (3 marks)

Thermal radiation (Stefan's law) · +3
A metal is heated in a furnace where a sensor is kept above the metal surface to read the power radiated (PP) by the metal. The sensor has a scale that displays log⁡2(P/P0)\log_2(P/P_0), where P0P_0 is a constant. When the metal surface is at a temperature of 487 ∘C487\ ^\circ\text{C}, the sensor shows a value 1. Assume that the emissivity of the metallic surface remains constant. What is the value displayed by the sensor when the temperature of the metal surface is raised to 2767 ∘C2767\ ^\circ\text{C}?

Tests: Apply Stefan's T⁴ law with temperatures in kelvin, then read a logarithmic scale.

Show solution
  1. Stefan-Boltzmann: P∝T4P \propto T^4 (emissivity constant), with TT in kelvin.
  2. T1=487+273=760T_1 = 487 + 273 = 760 K, T2=2767+273=3040T_2 = 2767 + 273 = 3040 K =4T1= 4T_1.
  3. P2P1=44=256=28\dfrac{P_2}{P_1} = 4^4 = 256 = 2^8.
  4. log⁡2P2P0=log⁡2P1P0+log⁡2256=1+8=9\log_2\dfrac{P_2}{P_0} = \log_2\dfrac{P_1}{P_0} + \log_2 256 = 1 + 8 = 9.
AnswerAnswer: 9
Ask about this question
Q15

Physics, Question 15 (3 marks)

Nuclear physics (beta decay, Q value) · +3
The isotope 512B^{12}_{5}\mathrm{B} having a mass 12.014 u undergoes β\beta-decay to 612C^{12}_{6}\mathrm{C}. 612C^{12}_{6}\mathrm{C} has an excited state of the nucleus (612C∗^{12}_{6}\mathrm{C}^*) at 4.041 MeV above its ground state. If 512B^{12}_{5}\mathrm{B} decays to 612C∗^{12}_{6}\mathrm{C}^*, the maximum kinetic energy of the β\beta-particle in units of MeV is (1 u=931.5 MeV/c21\ \text{u} = 931.5\ \text{MeV}/c^2, where cc is the speed of light in vacuum).

Tests: Find the Q value of beta decay from atomic masses and subtract the excitation energy of the daughter.

Show solution
  1. β−\beta^- decay: 512B→612C∗+e−+νˉ^{12}_{5}\mathrm{B} \rightarrow {}^{12}_{6}\mathrm{C}^* + e^- + \bar\nu. With atomic masses the electrons balance, so Q=[M(12B)−M(12C)]c2−E∗Q = [M(^{12}\mathrm{B}) - M(^{12}\mathrm{C})]c^2 - E^*.

    Why: The extra electron of carbon's atom is the emitted beta particle.

  2. M(12C)=12.000M(^{12}\mathrm{C}) = 12.000 u exactly (definition of u): Q0=0.014×931.5=13.041Q_0 = 0.014 \times 931.5 = 13.041 MeV to the ground state.
  3. To the excited state: Q=13.041−4.041=9.000Q = 13.041 - 4.041 = 9.000 MeV.
  4. The beta particle's KE is maximum when the antineutrino takes almost nothing (the heavy nucleus' recoil is negligible): Kmax≈9K_{max} \approx 9 MeV.
  5. Why the key accepts 8 OR 9: the paper does not say whether 12.014 u is an atomic or a nuclear mass and does not give the mass of 12C^{12}\mathrm{C}. Subtracting an electron's rest energy (0.511 MeV) as well gives 13.041−0.511−4.041=8.4913.041 - 0.511 - 4.041 = 8.49 MeV, read as 8. With atomic masses, as here, it is 9.
AnswerAnswer: 9 (the official key accepts 8 or 9)
Ask about this question
Q16

Physics, Question 16 (3 marks)

Bohr model (spectral lines) · +3
A hydrogen atom in its ground state is irradiated by light of wavelength 970 Å. Taking hc/e=1.237×10−6hc/e = 1.237 \times 10^{-6} eV m and the ground state energy of hydrogen atom as −13.6-13.6 eV, the number of lines present in the emission spectrum is

Tests: Find the level reached by absorbing a photon and count the possible emission lines.

Show solution
  1. Photon energy: E=1.237×10−6970×10−10E = \dfrac{1.237 \times 10^{-6}}{970 \times 10^{-10}} eV ≈12.75\approx 12.75 eV.
  2. The electron rises to En=−13.6+12.75=−0.85E_n = -13.6 + 12.75 = -0.85 eV =−13.616= -\dfrac{13.6}{16}, so n=4n = 4.
  3. From n=4n = 4 the electron can come down by any route; the number of distinct lines is n(n−1)2=4×32=6\dfrac{n(n-1)}{2} = \dfrac{4 \times 3}{2} = 6.

    Why: Every pair of levels from 1 to 4 gives one line.

AnswerAnswer: 6
Ask about this question
Q17

Physics, Question 17 (3 marks)

Viscosity (terminal velocity, Stokes' law) · +3
Consider two solid spheres P and Q each of density 8 gm cm−38\ \text{gm cm}^{-3} and diameters 1 cm and 0.5 cm, respectively. Sphere P is dropped into a liquid of density 0.8 gm cm−30.8\ \text{gm cm}^{-3} and viscosity η=3\eta = 3 poiseulles. Sphere Q is dropped into a liquid of density 1.6 gm cm−31.6\ \text{gm cm}^{-3} and viscosity η=2\eta = 2 poiseulles. The ratio of the terminal velocities of P and Q is

Tests: Compare terminal velocities using Stokes' law with buoyancy.

Show solution
  1. Terminal velocity: vt=2r2(ρ−σ)g9ηv_t = \dfrac{2r^2(\rho - \sigma)g}{9\eta}, so vt∝r2(ρ−σ)ηv_t \propto \dfrac{r^2(\rho - \sigma)}{\eta}.
  2. P: r=0.5r = 0.5 cm, ρ−σ=7.2\rho - \sigma = 7.2, η=3\eta = 3: 0.25×7.23=0.6\dfrac{0.25 \times 7.2}{3} = 0.6.
  3. Q: r=0.25r = 0.25 cm, ρ−σ=6.4\rho - \sigma = 6.4, η=2\eta = 2: 0.0625×6.42=0.2\dfrac{0.0625 \times 6.4}{2} = 0.2.
  4. vPvQ=0.60.2=3\dfrac{v_P}{v_Q} = \dfrac{0.6}{0.2} = 3.
AnswerAnswer: 3
Ask about this question
Q18

Physics, Question 18 (3 marks)

Inductors in DC circuits (LR transients) · +3
Two inductors L1L_1 (inductance 1 mH, internal resistance 3 Ω) and L2L_2 (inductance 2 mH, internal resistance 4 Ω), and a resistor RR (resistance 12 Ω) are all connected in parallel across a 5 V battery. The circuit is switched on at time t=0t = 0. The ratio of the maximum to the minimum current (Imax/IminI_{max}/I_{min}) drawn from the battery is

Tests: Use the t = 0 and t → ∞ behaviour of inductors to find the battery current's extremes.

Show solution
  1. At t=0t = 0 the inductors carry no current (they oppose the sudden change): only RR conducts. Imin=512I_{min} = \dfrac{5}{12} A.

    Why: Each branch current rises monotonically from zero, so the battery current is smallest at t = 0.

  2. After a long time the inductors act as plain wires with their internal resistances: three resistors 3 Ω, 4 Ω, 12 Ω in parallel. 1Req=13+14+112=812\dfrac{1}{R_{eq}} = \dfrac13 + \dfrac14 + \dfrac1{12} = \dfrac{8}{12}, so Req=1.5R_{eq} = 1.5 Ω.
  3. Imax=51.5=103I_{max} = \dfrac{5}{1.5} = \dfrac{10}{3} A.
  4. ImaxImin=10/35/12=8\dfrac{I_{max}}{I_{min}} = \dfrac{10/3}{5/12} = 8.
AnswerAnswer: 8
Ask about this question

Chemistry, Section 1: 5 questions, only one option correct: +3 if only the bubble of the correct option is darkened, 0 if none is darkened, −1 in all other cases

Q19

Chemistry, Question 19 (3 marks)

Atomic structure (radial probability) · +3 / −1
PP is the probability of finding the 1s electron of hydrogen atom in a spherical shell of infinitesimal thickness, drdr, at a distance rr from the nucleus. The volume of this shell is 4πr2dr4\pi r^2 dr. The qualitative sketch of the dependence of PP on rr is (Each option is a sketch of PP against rr, described in words.)
  1. (A)PP is largest at r=0r = 0 and falls steadily (exponential-like decay) towards zero as rr increases.
  2. (B)PP is zero at r=0r = 0, rises to a broad rounded hump and falls back to exactly zero at a finite rr (a semicircle-like curve).
  3. (C)PP is large at r=0r = 0, drops to a minimum close to zero, rises to a maximum and then decays towards zero.
  4. (D)PP is zero at r=0r = 0, rises to a single maximum and then decays smoothly, approaching zero at large rr.

Tests: Shape of the radial probability distribution of the hydrogen 1s orbital.

Show solution
  1. The probability in the shell is (probability density) ×\times (shell volume): P=ψ1s2⋅4πr2 drP = \psi_{1s}^2 \cdot 4\pi r^2\,dr.
  2. For hydrogen 1s, ψ1s∝e−r/a0\psi_{1s} \propto e^{-r/a_0}, so P∝r2e−2r/a0P \propto r^2 e^{-2r/a_0}.
  3. At r=0r = 0 the factor r2r^2 makes P=0P = 0; as r→∞r \to \infty the exponential makes P→0P \to 0 (but never exactly zero at finite rr).

    Why: So (A) and (C), which start high at r = 0, and (B), which hits zero at a finite r, are out.

  4. dPdr∝(2r−2r2a0)e−2r/a0=0\dfrac{dP}{dr} \propto \left(2r - \dfrac{2r^2}{a_0}\right)e^{-2r/a_0} = 0 gives one maximum at r=a0=52.9r = a_0 = 52.9 pm (Bohr radius), and no node for 1s. That is sketch (D).
AnswerAnswer: (D)
Ask about this question
Q20

Chemistry, Question 20 (3 marks)

Thermodynamics (entropy change of surroundings) · +3 / −1
One mole of an ideal gas at 300 K in thermal contact with surroundings expands isothermally from 1.0 L to 2.0 L against a constant pressure of 3.0 atm. In this process, the change in entropy of surroundings (ΔSsurr\Delta S_{surr}) in J K−1\mathrm{J\,K^{-1}} is (1 L atm=101.31\ \mathrm{L\,atm} = 101.3 J)
  1. (A)5.763
  2. (B)1.013
  3. (C)−1.013
  4. (D)−5.763

Tests: Entropy change of the surroundings for an irreversible isothermal expansion.

Show solution
  1. Irreversible expansion against constant external pressure: w=−PextΔV=−3.0×(2.0−1.0)=−3.0 L atm=−303.9w = -P_{ext}\Delta V = -3.0 \times (2.0 - 1.0) = -3.0\ \mathrm{L\,atm} = -303.9 J.
  2. Isothermal ideal gas: ΔU=0\Delta U = 0, so qsys=−w=+303.9q_{sys} = -w = +303.9 J. The gas absorbs this heat from the surroundings.
  3. The surroundings lose the same heat reversibly at 300 K: ΔSsurr=qsurrT=−303.9300=−1.013 J K−1\Delta S_{surr} = \dfrac{q_{surr}}{T} = \dfrac{-303.9}{300} = -1.013\ \mathrm{J\,K^{-1}}.

    Why: The surroundings act as a large reservoir, so their heat change is treated as reversible.

AnswerAnswer: (C) −1.013 J K−1-1.013\ \mathrm{J\,K^{-1}}
Ask about this question
Q21

Chemistry, Question 21 (3 marks)

p-block (Group 13, atomic radii) · +3 / −1
The increasing order of atomic radii of the following Group 13 elements is
  1. (A)Al < Ga < In < Tl
  2. (B)Ga < Al < In < Tl
  3. (C)Al < In < Ga < Tl
  4. (D)Al < Ga < Tl < In

Tests: Anomalous atomic radius of gallium caused by poor d-electron shielding.

Show solution
  1. Down a group the radius normally increases, but Ga comes right after the first transition series: its ten 3d electrons shield the nucleus poorly.

    Why: d electrons are diffuse and screen badly, so Zeff rises.

  2. So Ga (about 135 pm) is slightly smaller than Al (about 143 pm).
  3. In (about 167 pm) is larger; Tl (about 170 pm) is only a little larger than In because of the poor shielding by the 4f electrons (lanthanoid contraction).
  4. Increasing order: Ga < Al < In < Tl.
AnswerAnswer: (B) Ga < Al < In < Tl
Ask about this question
Q22

Chemistry, Question 22 (3 marks)

Coordination compounds and magnetism · +3 / −1
Among [Ni(CO)4]\mathrm{[Ni(CO)_4]}, [NiCl4]2−\mathrm{[NiCl_4]^{2-}}, [Co(NH3)4Cl2]Cl\mathrm{[Co(NH_3)_4Cl_2]Cl}, Na3[CoF6]\mathrm{Na_3[CoF_6]}, Na2O2\mathrm{Na_2O_2} and CsO2\mathrm{CsO_2}, the total number of paramagnetic compounds is
  1. (A)2
  2. (B)3
  3. (C)4
  4. (D)5

Tests: Decide paramagnetism from d-electron count, ligand field strength and O2 anion type.

Show solution
  1. [Ni(CO)4]\mathrm{[Ni(CO)_4]}: Ni(0), 3d103d^{10}, sp3sp^3 tetrahedral, all electrons paired: diamagnetic.
  2. [NiCl4]2−\mathrm{[NiCl_4]^{2-}}: Ni(II), 3d83d^8, weak-field Cl−\mathrm{Cl^-}, tetrahedral: 2 unpaired electrons: paramagnetic.
  3. [Co(NH3)4Cl2]Cl\mathrm{[Co(NH_3)_4Cl_2]Cl}: Co(III), 3d63d^6; NH3\mathrm{NH_3} pairs the electrons with Co(III) (t2g6t_{2g}^6, d2sp3d^2sp^3): diamagnetic. Na3[CoF6]\mathrm{Na_3[CoF_6]}: Co(III), 3d63d^6 with weak-field F−\mathrm{F^-}: high spin t2g4eg2t_{2g}^4e_g^2, 4 unpaired: paramagnetic.
  4. Na2O2\mathrm{Na_2O_2} contains peroxide O22−\mathrm{O_2^{2-}} (bond order 1, all paired): diamagnetic. CsO2\mathrm{CsO_2} contains superoxide O2−\mathrm{O_2^-} (one unpaired electron in π∗\pi^*): paramagnetic.
  5. Paramagnetic: [NiCl4]2−\mathrm{[NiCl_4]^{2-}}, Na3[CoF6]\mathrm{Na_3[CoF_6]}, CsO2\mathrm{CsO_2}, a total of 3.
AnswerAnswer: (B) 3
Ask about this question
Q23

Chemistry, Question 23 (3 marks)

Polymers (natural rubber) · +3 / −1
On complete hydrogenation, natural rubber produces
  1. (A)ethylene-propylene copolymer
  2. (B)vulcanised rubber
  3. (C)polypropylene
  4. (D)polybutylene

Tests: Relate the structure of hydrogenated polyisoprene to simple monomers.

Show solution
  1. Natural rubber is cis-1,4-polyisoprene: repeat unit −CH2−C(CH3)=CH−CH2−\mathrm{-CH_2-C(CH_3)=CH-CH_2-}.
  2. Complete hydrogenation adds H2\mathrm{H_2} across each C=C: repeat unit becomes −CH2−CH(CH3)−CH2−CH2−\mathrm{-CH_2-CH(CH_3)-CH_2-CH_2-}.
  3. Read this chain as −[CH2−CH(CH3)]−[CH2−CH2]−\mathrm{-[CH_2-CH(CH_3)]-[CH_2-CH_2]-}: a propylene unit followed by an ethylene unit, repeated. So the product is an (alternating) ethylene-propylene copolymer.

    Why: Vulcanisation is cross-linking with sulphur, not hydrogenation.

AnswerAnswer: (A) ethylene-propylene copolymer
Ask about this question

Chemistry, Section 2: 8 questions, one or more options correct: +4 if only the bubbles of all the correct options are darkened; +1 for each correct option darkened, provided no incorrect option is darkened; 0 if none is darkened; −2 in all other cases

Q24

Chemistry, Question 24 (4 marks)

Chemical kinetics (Arrhenius equation) · +4 / −2
According to the Arrhenius equation,
  1. (A)a high activation energy usually implies a fast reaction.
  2. (B)rate constant increases with increase in temperature. This is due to a greater number of collisions whose energy exceeds the activation energy.
  3. (C)higher the magnitude of activation energy, stronger is the temperature dependence of the rate constant.
  4. (D)the pre-exponential factor is a measure of the rate at which collisions occur, irrespective of their energy.

Tests: Interpret each factor of the Arrhenius equation physically.

Show solution
  1. Arrhenius: k=A e−Ea/RTk = A\,e^{-E_a/RT}. The factor e−Ea/RTe^{-E_a/RT} is the fraction of collisions with energy at least EaE_a.
  2. (A) False: a larger EaE_a makes e−Ea/RTe^{-E_a/RT} smaller, so kk is smaller and the reaction is usually slower.
  3. (B) True: raising TT increases e−Ea/RTe^{-E_a/RT}, i.e. a larger number of collisions have energy exceeding EaE_a; that is why kk rises.
  4. (C) True: dln⁡kdT=EaRT2\dfrac{d\ln k}{dT} = \dfrac{E_a}{RT^2}, so the larger EaE_a, the more steeply kk changes with TT.
  5. (D) True: in collision theory A=pZA = pZ, the frequency of collisions (with the orientation factor), counted regardless of their energy; the energy requirement sits in the exponential.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q25

Chemistry, Question 25 (4 marks)

Nuclear chemistry (modes of decay) · +4 / −2
A plot of the number of neutrons (NN) against the number of protons (PP) of stable nuclei exhibits upward deviation from linearity for atomic number, Z>20Z > 20. For an unstable nucleus having N/PN/P ratio less than 1, the possible mode(s) of decay is(are)
  1. (A)β−\beta^--decay (β\beta emission)
  2. (B)orbital or K-electron capture
  3. (C)neutron emission
  4. (D)β+\beta^+-decay (positron emission)

Tests: Choose decay modes that move a proton-rich nucleus towards the stability belt.

Show solution
  1. N/P<1N/P < 1 means the nucleus has too many protons (it lies below the stability belt). To become stable it must raise N/PN/P, i.e. turn a proton into a neutron.
  2. (B) True: K-electron capture, p+e−→n\mathrm{p + e^- \rightarrow n}, lowers PP by 1 and raises NN by 1.
  3. (D) True: positron emission, p→n+e+\mathrm{p \rightarrow n + e^+} (with a neutrino), does the same.
  4. (A) False: β−\beta^- decay, n→p+e−\mathrm{n \rightarrow p + e^-}, lowers N/PN/P further. (C) False: losing a neutron also lowers N/PN/P; it suits neutron-rich nuclei.
AnswerAnswer: (B), (D)
Ask about this question
Q26

Chemistry, Question 26 (4 marks)

p-block (Boron: structure of borax) · +4 / −2
The crystalline form of borax has
  1. (A)tetranuclear [B4O5(OH)4]2−\mathrm{[B_4O_5(OH)_4]^{2-}} unit
  2. (B)all boron atoms in the same plane
  3. (C)equal number of sp2sp^2 and sp3sp^3 hybridized boron atoms
  4. (D)one terminal hydroxide per boron atom

Tests: Structure of the borax anion: hybridisation, geometry and terminal OH groups.

Show solution
  1. Borax is Na2[B4O5(OH)4]⋅8H2O\mathrm{Na_2[B_4O_5(OH)_4]\cdot 8H_2O}: the anion is the tetranuclear [B4O5(OH)4]2−\mathrm{[B_4O_5(OH)_4]^{2-}} unit. (A) True.
  2. In the anion, two B atoms are trigonal planar BO3\mathrm{BO_3} (sp2sp^2) and two are tetrahedral BO4−\mathrm{BO_4^-} (sp3sp^3), linked through five bridging O atoms. (C) True: 2 and 2.
  3. The two tetrahedral B atoms make the cage non-planar, so the four B atoms are not in one plane. (B) False.
  4. Each of the four B atoms carries exactly one terminal −OH\mathrm{-OH} (4 OH for 4 B). (D) True.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q27

Chemistry, Question 27 (4 marks)

Chemical bonding (VSEPR) · +4 / −2
The compound(s) with TWO lone pairs of electrons on the central atom is(are)
  1. (A)BrF5\mathrm{BrF_5}
  2. (B)ClF3\mathrm{ClF_3}
  3. (C)XeF4\mathrm{XeF_4}
  4. (D)SF4\mathrm{SF_4}

Tests: Count lone pairs on the central atom of interhalogens and noble gas fluorides.

Show solution
  1. Lone pairs on the central atom = (valence electrons − electrons used in bonds) / 2, with one electron per F bond.
  2. (A) BrF5\mathrm{BrF_5}: (7−5)/2=1(7 - 5)/2 = 1 lone pair (square pyramidal). False.
  3. (B) ClF3\mathrm{ClF_3}: (7−3)/2=2(7 - 3)/2 = 2 lone pairs (T-shaped). True. (C) XeF4\mathrm{XeF_4}: (8−4)/2=2(8 - 4)/2 = 2 lone pairs (square planar). True.
  4. (D) SF4\mathrm{SF_4}: (6−4)/2=1(6 - 4)/2 = 1 lone pair (see-saw). False.
AnswerAnswer: (B), (C)
Ask about this question
Q28

Chemistry, Question 28 (4 marks)

Qualitative analysis (sulphide and sulphate ions) · +4 / −2
The reagent(s) that can selectively precipitate S2−\mathrm{S^{2-}} from a mixture of S2−\mathrm{S^{2-}} and SO42−\mathrm{SO_4^{2-}} in aqueous solution is(are)
  1. (A)CuCl2\mathrm{CuCl_2}
  2. (B)BaCl2\mathrm{BaCl_2}
  3. (C)Pb(OOCCH3)2\mathrm{Pb(OOCCH_3)_2}
  4. (D)Na2[Fe(CN)5NO]\mathrm{Na_2[Fe(CN)_5NO]}

Tests: Use solubility of sulphides and sulphates to choose a selective precipitant.

Show solution
  1. "Selective" means the reagent precipitates the sulphide and leaves the sulphate in solution.
  2. (A) Cu2++S2−→CuS\mathrm{Cu^{2+} + S^{2-} \rightarrow CuS} (black precipitate), while CuSO4\mathrm{CuSO_4} is freely soluble. Selective: correct.
  3. (B) Ba2+\mathrm{Ba^{2+}} precipitates BaSO4\mathrm{BaSO_4} (white) and BaS is soluble: it removes the sulphate, not the sulphide. Wrong. (D) Sodium nitroprusside gives a violet colour with S2−\mathrm{S^{2-}} (soluble [Fe(CN)5NOS]4−\mathrm{[Fe(CN)_5NOS]^{4-}}), not a precipitate. Wrong.
  4. (C) Lead acetate gives black PbS, but PbSO4\mathrm{PbSO_4} is also insoluble (white precipitate, the usual confirmatory test for sulphate), so with excess Pb2+\mathrm{Pb^{2+}} both ions come down. Strictly it is not selective, so our answer is (A).
  5. Why the key also accepts (A) and (C): KspK_{sp}(PbS) ≈10−28\approx 10^{-28} is about 102010^{20} times smaller than Ksp(PbSO4)≈1.6×10−8K_{sp}(\mathrm{PbSO_4}) \approx 1.6 \times 10^{-8}. Adding Pb2+\mathrm{Pb^{2+}} slowly precipitates the sulphide almost completely before PbSO4\mathrm{PbSO_4} starts (fractional precipitation), so (C) can also be argued as selective.

    Why: The official key reads "(A) OR (A) and (C)".

AnswerAnswer: (A) CuCl2\mathrm{CuCl_2} (the official key also accepts (A) and (C))
Ask about this question
Q29

Chemistry, Question 29 (4 marks)

Aldehydes and ketones (Tollens' test) · +4 / −2
Positive Tollen's test is observed for (Each option is a drawn structure, given here by name.)
  1. (A)Acrolein (prop-2-enal), CH2=CH−CHO\mathrm{CH_2=CH-CHO}
  2. (B)Benzaldehyde, C6H5CHO\mathrm{C_6H_5CHO}
  3. (C)Benzoin, C6H5CH(OH)COC6H5\mathrm{C_6H_5CH(OH)COC_6H_5} (2-hydroxy-1,2-diphenylethan-1-one)
  4. (D)Chalcone, C6H5CH=CHCOC6H5\mathrm{C_6H_5CH=CHCOC_6H_5} (1,3-diphenylprop-2-en-1-one)

Tests: Identify compounds that reduce Tollens' reagent: aldehydes and α-hydroxy ketones.

Show solution
  1. Tollens' reagent [Ag(NH3)2]+\mathrm{[Ag(NH_3)_2]^+} is a mild oxidant: it oxidises aldehydes (and α\alpha-hydroxy ketones) and is reduced to a silver mirror. Ordinary ketones do not react.
  2. (A) True: acrolein is an aldehyde; Tollens' oxidises the CHO and leaves the C=C untouched.
  3. (B) True: aromatic aldehydes such as benzaldehyde give the silver mirror (they fail Fehling's test, not Tollens').
  4. (C) True: benzoin is an α\alpha-hydroxy ketone. In the basic reagent it tautomerises through an enediol and is oxidised to benzil, reducing Ag+\mathrm{Ag^+} to Ag.

    Why: The same reason fructose (an α-hydroxy ketone) is a reducing sugar.

  5. (D) False: chalcone is an α,β\alpha,\beta-unsaturated ketone with no CHO and no α\alpha-OH.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q30

Chemistry, Question 30 (4 marks)

Amines and diazonium salts · +4 / −2
The product(s) of the following reaction sequence is(are) (Aniline, C6H5NH2\mathrm{C_6H_5NH_2}, is treated with: i) acetic anhydride/pyridine; ii) KBrO3/HBr\mathrm{KBrO_3/HBr}; iii) H3O+\mathrm{H_3O^+}, heat; iv) NaNO2/HCl\mathrm{NaNO_2/HCl}, 273–278 K; v) Cu/HBr. Each option is a drawn bromobenzene, given here by name.)
  1. (A)1,3-Dibromobenzene
  2. (B)1,4-Dibromobenzene
  3. (C)1,2,3-Tribromobenzene
  4. (D)1,2,3,5-Tetrabromobenzene

Tests: Use acetyl protection to control bromination of aniline, then replace NH2 via a diazonium salt.

Show solution
  1. (i) Acetylation protects the amine: aniline →\rightarrow acetanilide C6H5NHCOCH3\mathrm{C_6H_5NHCOCH_3}. The −NHCOCH3\mathrm{-NHCOCH_3} group is a milder ortho/para director than −NH2\mathrm{-NH_2}.

    Why: Free aniline with bromine would give 2,4,6-tribromoaniline at once.

  2. (ii) KBrO3/HBr\mathrm{KBrO_3/HBr} releases Br2\mathrm{Br_2} in situ (BrO3−+5Br−+6H+→3Br2+3H2O\mathrm{BrO_3^- + 5Br^- + 6H^+ \rightarrow 3Br_2 + 3H_2O}); the bulky acetamido group directs one Br mainly para: p-bromoacetanilide.
  3. (iii) Acid hydrolysis removes the acetyl group: 4-bromoaniline. (iv) Diazotisation at 0–5 °C: 4-bromobenzenediazonium chloride.
  4. (v) Cu/HBr (Gattermann reaction) replaces −N2+\mathrm{-N_2^+} by Br: 1,4-dibromobenzene.
AnswerAnswer: (B) 1,4-dibromobenzene
Ask about this question
Q31

Chemistry, Question 31 (4 marks)

Phenols (cumene process, Reimer–Tiemann reaction) · +4 / −2
The correct statement(s) about the following reaction sequence is(are) (Scheme: Cumene (C9H12\mathrm{C_9H_{12}}) is treated with i) O2\mathrm{O_2}, ii) H3O+\mathrm{H_3O^+} to give P; P with CHCl3/NaOH\mathrm{CHCl_3/NaOH} gives Q (major) + R (minor); Q with NaOH and PhCH2Br\mathrm{PhCH_2Br} gives S.)
  1. (A)R is steam volatile
  2. (B)Q gives dark violet coloration with 1% aqueous FeCl3\mathrm{FeCl_3} solution
  3. (C)S gives yellow precipitate with 2, 4-dinitrophenylhydrazine
  4. (D)S gives dark violet coloration with 1% aqueous FeCl3\mathrm{FeCl_3} solution

Tests: Trace cumene → phenol → salicylaldehyde → benzyl ether and test each product.

Show solution
  1. Cumene (isopropylbenzene) with O2\mathrm{O_2} gives cumene hydroperoxide; acid cleaves it to P = phenol (and acetone).
  2. Reimer–Tiemann (CHCl3/NaOH\mathrm{CHCl_3/NaOH}) on phenol: Q (major) = salicylaldehyde (2-hydroxybenzaldehyde); R (minor) = 4-hydroxybenzaldehyde.
  3. Q + NaOH + PhCH2Br\mathrm{PhCH_2Br} (Williamson ether synthesis): S = 2-(benzyloxy)benzaldehyde, o-C6H4(OCH2C6H5)CHO\mathrm{o\text{-}C_6H_4(OCH_2C_6H_5)CHO}.
  4. (A) False: R (para) has intermolecular H-bonding (high b.p.) and is not steam volatile; it is the ortho isomer Q, with intramolecular H-bonding, that distils in steam.
  5. (B) True: Q has a free phenolic OH, which gives the violet FeCl3\mathrm{FeCl_3} colour. (C) True: S still has CHO, so it forms a yellow-orange 2,4-DNP hydrazone. (D) False: in S the OH is now an ether, so no FeCl3\mathrm{FeCl_3} colour.
AnswerAnswer: (B), (C)
Ask about this question

Chemistry, Section 3: 5 questions, answer is a single-digit integer from 0 to 9: +3 if only the bubble of the correct answer is darkened, 0 in all other cases

Q32

Chemistry, Question 32 (3 marks)

Solutions (concentration terms) · +3
The mole fraction of a solute in a solution is 0.1. At 298 K, molarity of this solution is the same as its molality. Density of this solution at 298 K is 2.0 g cm−32.0\ \mathrm{g\,cm^{-3}}. The ratio of the molecular weights of the solute and solvent, (MWsoluteMWsolvent)\left(\dfrac{MW_{solute}}{MW_{solvent}}\right), is

Tests: Link mole fraction, molarity, molality and density of a solution.

Show solution
  1. Take 1 mol of solution: 0.1 mol solute (molar mass M2M_2) and 0.9 mol solvent (M1M_1). Mass of solvent =0.9M1= 0.9M_1 g; mass of solution =0.1M2+0.9M1= 0.1M_2 + 0.9M_1 g.
  2. Molality =0.10.9M1/1000= \dfrac{0.1}{0.9M_1/1000} and molarity =0.1V/1000= \dfrac{0.1}{V/1000} with VV in mL. Equal molarity and molality means V(mL)=0.9M1V(\text{mL}) = 0.9M_1 (numerically equal to the solvent mass in g).
  3. V=massdensity=0.1M2+0.9M12.0V = \dfrac{\text{mass}}{\text{density}} = \dfrac{0.1M_2 + 0.9M_1}{2.0}, so 0.1M2+0.9M12.0=0.9M1\dfrac{0.1M_2 + 0.9M_1}{2.0} = 0.9M_1.
  4. 0.1M2+0.9M1=1.8M1⇒0.1M2=0.9M1⇒M2M1=90.1M_2 + 0.9M_1 = 1.8M_1 \Rightarrow 0.1M_2 = 0.9M_1 \Rightarrow \dfrac{M_2}{M_1} = 9.
AnswerAnswer: 9
Ask about this question
Q33

Chemistry, Question 33 (3 marks)

Kinetic theory of gases (mean free path) · +3
The diffusion coefficient of an ideal gas is proportional to its mean free path and mean speed. The absolute temperature of an ideal gas is increased 4 times and its pressure is increased 2 times. As a result, the diffusion coefficient of this gas increases xx times. The value of xx is

Tests: Combine the T and P dependence of mean free path and mean speed.

Show solution
  1. Mean free path λ=kT2πd2P\lambda = \dfrac{kT}{\sqrt{2}\pi d^2 P}, so λ∝TP\lambda \propto \dfrac{T}{P}. Mean speed uˉ=8RTπM\bar{u} = \sqrt{\dfrac{8RT}{\pi M}}, so uˉ∝T\bar{u} \propto \sqrt{T}.
  2. D∝λ uˉ∝T3/2PD \propto \lambda\,\bar{u} \propto \dfrac{T^{3/2}}{P}.
  3. x=43/22=82=4x = \dfrac{4^{3/2}}{2} = \dfrac{8}{2} = 4.
AnswerAnswer: 4
Ask about this question
Q34

Chemistry, Question 34 (3 marks)

Redox reactions (permanganate titrations) · +3
In neutral or faintly alkaline solution, 8 moles of permanganate anion quantitatively oxidize thiosulphate anions to produce X moles of a sulphur containing product. The magnitude of X is

Tests: Balance permanganate–thiosulphate redox in neutral medium by electron counting.

Show solution
  1. Neutral/faintly alkaline: MnO4−+2H2O+3e−→MnO2+4OH−\mathrm{MnO_4^- + 2H_2O + 3e^- \rightarrow MnO_2 + 4OH^-} (Mn +7 to +4, 3 electrons).
  2. Under these conditions thiosulphate is oxidised to sulphate: S2O32−+10OH−→2SO42−+5H2O+8e−\mathrm{S_2O_3^{2-} + 10OH^- \rightarrow 2SO_4^{2-} + 5H_2O + 8e^-} (average S +2 to +6, 8 electrons per ion).

    Why: In neutral/alkaline KMnO4, thiosulphate goes all the way to sulphate (textbook reaction).

  3. 8 mol MnO4−\mathrm{MnO_4^-} take 8×3=248 \times 3 = 24 mol electrons, enough for 24/8=324/8 = 3 mol S2O32−\mathrm{S_2O_3^{2-}}, which give 3×2=63 \times 2 = 6 mol SO42−\mathrm{SO_4^{2-}}.
  4. Overall: 8MnO4−+3S2O32−+H2O→8MnO2+6SO42−+2OH−\mathrm{8MnO_4^- + 3S_2O_3^{2-} + H_2O \rightarrow 8MnO_2 + 6SO_4^{2-} + 2OH^-}. So X=6X = 6.
AnswerAnswer: 6
Ask about this question
Q35

Chemistry, Question 35 (3 marks)

Coordination compounds (geometrical isomerism) · +3
The number of geometric isomers possible for the complex [CoL2Cl2]−\mathrm{[CoL_2Cl_2]^-} (L=H2NCH2CH2O−\mathrm{L = H_2NCH_2CH_2O^-}) is

Tests: Count geometrical isomers of an octahedral M(AB)2c2 complex.

Show solution
  1. L (2-aminoethanolate) is an unsymmetrical bidentate ligand with ends N and O, so the complex is octahedral [M(AB)2c2]\mathrm{[M(AB)_2c_2]}.
  2. Cl trans to Cl: both chelates lie in the square plane. Either the two N atoms are trans to each other (and the two O trans), or each N is trans to an O: 2 isomers.
  3. Cl cis to Cl: look at the two atoms trans to the Cl ligands. They can be N and N (then the O atoms are trans to each other), O and O (N trans to N), or N and O (then N is trans to O): 3 isomers.
  4. Total geometric isomers =2+3=5= 2 + 3 = 5. (The three cis forms are chiral, so there are 8 stereoisomers in all, but the question asks only for geometric isomers.)
AnswerAnswer: 5
Ask about this question
Q36

Chemistry, Question 36 (3 marks)

Free radical halogenation and stereoisomerism · +3
In the following monobromination reaction, the number of possible chiral products is (The substrate, 1.0 mole, enantiomerically pure, is shown as a Fischer projection: the vertical bonds carry CH2CH2CH3\mathrm{CH_2CH_2CH_3} at the top and CH3\mathrm{CH_3} at the bottom; the horizontal bonds carry H on the left and Br on the right, i.e. (R)-2-bromopentane. It is treated with Br2\mathrm{Br_2} (1.0 mole) at 300 °C.)

Tests: Count chiral products of radical monobromination when a stereocentre is already present.

Show solution
  1. The substrate is CH3−CHBr−CH2CH2CH3\mathrm{CH_3-CHBr-CH_2CH_2CH_3} with one stereocentre (C2). Free-radical bromination can replace an H on C1, C2, C3, C4 or C5; the C2 configuration is kept unless C2 itself reacts.
  2. C1: BrCH2CHBrCH2CH2CH3\mathrm{BrCH_2CHBrCH_2CH_2CH_3} (1,2-dibromopentane), C2 unchanged: 1 chiral product. C2: CH3CBr2CH2CH2CH3\mathrm{CH_3CBr_2CH_2CH_2CH_3} (2,2-dibromopentane): achiral, 0.
  3. C3: 2,3-dibromopentane, a new stereocentre at C3 with C2 fixed: two diastereomers, both chiral (the two ends, CH3\mathrm{CH_3} and C2H5\mathrm{C_2H_5}, differ, so no meso form): 2.
  4. C4: 2,4-dibromopentane, CH3CHBrCH2CHBrCH3\mathrm{CH_3CHBrCH_2CHBrCH_3}: two diastereomers, one meso (achiral, 2R,4S) and one chiral (2R,4R): 1 chiral.

    Why: The molecule is symmetric end to end, so the R,S form has a mirror plane.

  5. C5: CH3CHBrCH2CH2CH2Br\mathrm{CH_3CHBrCH_2CH_2CH_2Br} (1,4-dibromopentane), C2 unchanged: 1 chiral. Total chiral products =1+0+2+1+1=5= 1 + 0 + 2 + 1 + 1 = 5.
AnswerAnswer: 5
Ask about this question

Mathematics, Section 1: 5 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q37

Mathematics, Question 37 (3 marks)

Quadratic equations and trigonometric signs · +3 / −1
Let −π6<θ<−π12-\dfrac{\pi}{6} < \theta < -\dfrac{\pi}{12}. Suppose α1\alpha_1 and β1\beta_1 are the roots of the equation x2−2xsec⁡θ+1=0x^2 - 2x\sec\theta + 1 = 0 and α2\alpha_2 and β2\beta_2 are the roots of the equation x2+2xtan⁡θ−1=0x^2 + 2x\tan\theta - 1 = 0. If α1>β1\alpha_1 > \beta_1 and α2>β2\alpha_2 > \beta_2, then α1+β2\alpha_1 + \beta_2 equals
  1. (A)2(sec⁡θ−tan⁡θ)2(\sec\theta - \tan\theta)
  2. (B)2sec⁡θ2\sec\theta
  3. (C)−2tan⁡θ-2\tan\theta
  4. (D)0

Tests: Find the roots of a quadratic and order them using the signs of sec and tan in the given interval.

Show solution
  1. Roots of x2−2xsec⁡θ+1=0x^2 - 2x\sec\theta + 1 = 0: x=sec⁡θ±sec⁡2θ−1=sec⁡θ±∣tan⁡θ∣x = \sec\theta \pm \sqrt{\sec^2\theta - 1} = \sec\theta \pm |\tan\theta|, i.e. sec⁡θ+tan⁡θ\sec\theta + \tan\theta and sec⁡θ−tan⁡θ\sec\theta - \tan\theta.
  2. For θ∈(−π/6,−π/12)\theta \in (-\pi/6, -\pi/12) (fourth quadrant): sec⁡θ>0\sec\theta > 0 and tan⁡θ<0\tan\theta < 0. So sec⁡θ−tan⁡θ>sec⁡θ+tan⁡θ\sec\theta - \tan\theta > \sec\theta + \tan\theta, giving α1=sec⁡θ−tan⁡θ\alpha_1 = \sec\theta - \tan\theta.

    Why: Subtracting a negative number gives the larger value.

  3. Roots of x2+2xtan⁡θ−1=0x^2 + 2x\tan\theta - 1 = 0: x=−tan⁡θ±tan⁡2θ+1=−tan⁡θ±sec⁡θx = -\tan\theta \pm \sqrt{\tan^2\theta + 1} = -\tan\theta \pm \sec\theta (using sec⁡θ>0\sec\theta > 0).
  4. The smaller root is β2=−tan⁡θ−sec⁡θ\beta_2 = -\tan\theta - \sec\theta.
  5. α1+β2=(sec⁡θ−tan⁡θ)+(−tan⁡θ−sec⁡θ)=−2tan⁡θ\alpha_1 + \beta_2 = (\sec\theta - \tan\theta) + (-\tan\theta - \sec\theta) = -2\tan\theta.
AnswerAnswer: (C) −2tan⁡θ-2\tan\theta
Ask about this question
Q38

Mathematics, Question 38 (3 marks)

Permutations and combinations · +3 / −1
A debate club consists of 6 girls and 4 boys. A team of 4 members is to be selected from this club including the selection of a captain (from among these 4 members) for the team. If the team has to include at most one boy, then the number of ways of selecting the team is
  1. (A)380
  2. (B)320
  3. (C)260
  4. (D)95

Tests: Count selections with a restriction, then multiply by the choices for a captain.

Show solution
  1. "At most one boy" means 0 boys or exactly 1 boy. After choosing the 4 members, the captain can be any of the 4: multiply by 4.
  2. No boy: choose 4 girls from 6: (64)=15\binom{6}{4} = 15 teams, 15×4=6015 \times 4 = 60 ways with captain.
  3. One boy: (41)(63)=4×20=80\binom{4}{1}\binom{6}{3} = 4 \times 20 = 80 teams, 80×4=32080 \times 4 = 320 ways with captain.
  4. Total =60+320=380= 60 + 320 = 380.
AnswerAnswer: (A) 380
Ask about this question
Q39

Mathematics, Question 39 (3 marks)

Trigonometric equations · +3 / −1
Let S={x∈(−π,π):x≠0,±π2}S = \left\{x \in (-\pi, \pi) : x \ne 0, \pm\dfrac{\pi}{2}\right\}. The sum of all distinct solutions of the equation 3sec⁡x+cosec⁡x+2(tan⁡x−cot⁡x)=0\sqrt{3}\sec x + \operatorname{cosec} x + 2(\tan x - \cot x) = 0 in the set SS is equal to
  1. (A)−7π9-\dfrac{7\pi}{9}
  2. (B)−2π9-\dfrac{2\pi}{9}
  3. (C)0
  4. (D)5π9\dfrac{5\pi}{9}

Tests: Reduce a sec/cosec/tan/cot equation to cos A = cos B and collect all solutions in an interval.

Show solution
  1. Multiply by sin⁡xcos⁡x\sin x\cos x (non-zero on SS): 3sin⁡x+cos⁡x+2(sin⁡2x−cos⁡2x)=0\sqrt{3}\sin x + \cos x + 2(\sin^2 x - \cos^2 x) = 0, i.e. 3sin⁡x+cos⁡x=2cos⁡2x\sqrt{3}\sin x + \cos x = 2\cos 2x.
  2. 3sin⁡x+cos⁡x=2cos⁡(x−π3)\sqrt{3}\sin x + \cos x = 2\cos\left(x - \dfrac{\pi}{3}\right), so cos⁡2x=cos⁡(x−π3)\cos 2x = \cos\left(x - \dfrac{\pi}{3}\right).
  3. Hence 2x=2nπ±(x−π3)2x = 2n\pi \pm \left(x - \dfrac{\pi}{3}\right). With ++: x=2nπ−π3x = 2n\pi - \dfrac{\pi}{3}, giving x=−π3x = -\dfrac{\pi}{3} in (−π,π)(-\pi, \pi).
  4. With −-: 3x=2nπ+π33x = 2n\pi + \dfrac{\pi}{3}, x=2nπ3+π9x = \dfrac{2n\pi}{3} + \dfrac{\pi}{9}, giving π9,7π9,−5π9\dfrac{\pi}{9}, \dfrac{7\pi}{9}, -\dfrac{5\pi}{9} in (−π,π)(-\pi, \pi).
  5. None of these is 00 or ±π/2\pm\pi/2, so all four are in SS. Sum: −3π+π+7π−5π9=0\dfrac{-3\pi + \pi + 7\pi - 5\pi}{9} = 0.
AnswerAnswer: (C) 0
Ask about this question
Q40

Mathematics, Question 40 (3 marks)

Probability (Bayes' theorem) · +3 / −1
A computer producing factory has only two plants T1T_1 and T2T_2. Plant T1T_1 produces 20% and plant T2T_2 produces 80% of the total computers produced. 7% of computers produced in the factory turn out to be defective. It is known that P(computer turns out to be defective given that it is produced in plant T1)=10P(computer turns out to be defective given that it is produced in plant T2)P(\text{computer turns out to be defective given that it is produced in plant } T_1) = 10P(\text{computer turns out to be defective given that it is produced in plant } T_2), where P(E)P(E) denotes the probability of an event EE. A computer produced in the factory is randomly selected and it does not turn out to be defective. Then the probability that it is produced in plant T2T_2 is
  1. (A)3673\dfrac{36}{73}
  2. (B)4779\dfrac{47}{79}
  3. (C)7893\dfrac{78}{93}
  4. (D)7583\dfrac{75}{83}

Tests: Use total probability to find the unknown conditional rates, then Bayes' theorem on the non-defective event.

Show solution
  1. Let P(D∣T2)=pP(D \mid T_2) = p, so P(D∣T1)=10pP(D \mid T_1) = 10p. Total probability: 0.2(10p)+0.8p=0.070.2(10p) + 0.8p = 0.07.
  2. 2.8p=0.07⇒p=0.0252.8p = 0.07 \Rightarrow p = 0.025. So P(D′∣T2)=0.975P(D' \mid T_2) = 0.975, P(D′∣T1)=0.75P(D' \mid T_1) = 0.75.
  3. P(D′)=1−0.07=0.93P(D') = 1 - 0.07 = 0.93 and P(T2∩D′)=0.8×0.975=0.78P(T_2 \cap D') = 0.8 \times 0.975 = 0.78.
  4. Bayes: P(T2∣D′)=0.780.93=7893P(T_2 \mid D') = \dfrac{0.78}{0.93} = \dfrac{78}{93}.
AnswerAnswer: (C) 7893\dfrac{78}{93}
Ask about this question
Q41

Mathematics, Question 41 (3 marks)

Inequalities (AM-GM) · +3 / −1
The least value of α∈R\alpha \in \mathbb{R} for which 4αx2+1x≥14\alpha x^2 + \dfrac{1}{x} \ge 1, for all x>0x > 0, is
  1. (A)164\dfrac{1}{64}
  2. (B)132\dfrac{1}{32}
  3. (C)127\dfrac{1}{27}
  4. (D)125\dfrac{1}{25}

Tests: Find the minimum of a function of x by AM-GM (or calculus) and make it at least 1.

Show solution
  1. If α≤0\alpha \le 0, then for large xx the left side is at most 1/x<11/x < 1, so α>0\alpha > 0.
  2. Split 1x=12x+12x\dfrac{1}{x} = \dfrac{1}{2x} + \dfrac{1}{2x} and apply AM-GM to three terms: 4αx2+12x+12x≥34αx2⋅14x23=3α1/34\alpha x^2 + \dfrac{1}{2x} + \dfrac{1}{2x} \ge 3\sqrt[3]{4\alpha x^2 \cdot \dfrac{1}{4x^2}} = 3\alpha^{1/3}.

    Why: The split makes the product independent of x, so the bound is the true minimum (equality is attainable).

  3. The minimum over x>0x > 0 is 3α1/33\alpha^{1/3}, attained when 4αx2=12x4\alpha x^2 = \dfrac{1}{2x}.
  4. Need 3α1/3≥13\alpha^{1/3} \ge 1, i.e. α≥127\alpha \ge \dfrac{1}{27}. Least value 127\dfrac{1}{27}.
AnswerAnswer: (C) 127\dfrac{1}{27}
Ask about this question

Mathematics, Section 2: 8 questions, one or more options correct: +4 if all the correct options (and only those) are chosen; +1 for each correct option chosen, provided no incorrect option is chosen; 0 if unanswered; −2 in all other cases

Q42

Mathematics, Question 42 (4 marks)

3D geometry (lines and planes) · +4 / −2
Consider a pyramid OPQRSOPQRS located in the first octant (x≥0,y≥0,z≥0x \ge 0, y \ge 0, z \ge 0) with OO as origin, and OPOP and OROR along the xx-axis and the yy-axis, respectively. The base OPQROPQR of the pyramid is a square with OP=3OP = 3. The point SS is directly above the mid-point TT of diagonal OQOQ such that TS=3TS = 3. Then
  1. (A)the acute angle between OQOQ and OSOS is π3\dfrac{\pi}{3}
  2. (B)the equation of the plane containing the triangle OQSOQS is x−y=0x - y = 0
  3. (C)the length of the perpendicular from PP to the plane containing the triangle OQSOQS is 32\dfrac{3}{\sqrt{2}}
  4. (D)the perpendicular distance from OO to the straight line containing RSRS is 152\sqrt{\dfrac{15}{2}}

Tests: Set up coordinates for a solid, then use dot and cross products for angles, planes and distances.

Show solution
  1. Coordinates: O(0,0,0)O(0,0,0), P(3,0,0)P(3,0,0), Q(3,3,0)Q(3,3,0), R(0,3,0)R(0,3,0), T(32,32,0)T\left(\tfrac{3}{2}, \tfrac{3}{2}, 0\right), S(32,32,3)S\left(\tfrac{3}{2}, \tfrac{3}{2}, 3\right).
  2. (A) OQ⃗∥(1,1,0)\vec{OQ} \parallel (1,1,0), OS⃗∥(1,1,2)\vec{OS} \parallel (1,1,2): cos⁡ϕ=226=13\cos\phi = \dfrac{2}{\sqrt{2}\sqrt{6}} = \dfrac{1}{\sqrt{3}}, not 12\dfrac{1}{2}. False.
  3. (B) Normal to plane OQSOQS: (1,1,0)×(1,1,2)=(2,−2,0)(1,1,0) \times (1,1,2) = (2,-2,0). Through OO: x−y=0x - y = 0. True.
  4. (C) Distance of P(3,0,0)P(3,0,0) from x−y=0x - y = 0: ∣3−0∣2=32\dfrac{|3 - 0|}{\sqrt{2}} = \dfrac{3}{\sqrt{2}}. True.
  5. (D) Line RSRS: through R(0,3,0)R(0,3,0) with direction RS⃗=(32,−32,3)∥(1,−1,2)\vec{RS} = \left(\tfrac{3}{2}, -\tfrac{3}{2}, 3\right) \parallel (1,-1,2). Distance =∣RO⃗×d⃗∣∣d⃗∣= \dfrac{|\vec{RO} \times \vec{d}|}{|\vec{d}|}; (0,3,0)×(1,−1,2)=(6,0,−3)(0,3,0) \times (1,-1,2) = (6, 0, -3), so distance =456=152= \dfrac{\sqrt{45}}{\sqrt{6}} = \sqrt{\dfrac{15}{2}}. True.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q43

Mathematics, Question 43 (4 marks)

Differential equations and limits · +4 / −2
Let f:(0,∞)→Rf : (0, \infty) \rightarrow \mathbb{R} be a differentiable function such that f′(x)=2−f(x)xf'(x) = 2 - \dfrac{f(x)}{x} for all x∈(0,∞)x \in (0, \infty) and f(1)≠1f(1) \ne 1. Then
  1. (A)lim⁡x→0+f′(1x)=1\displaystyle\lim_{x \to 0+} f'\left(\dfrac{1}{x}\right) = 1
  2. (B)lim⁡x→0+xf(1x)=2\displaystyle\lim_{x \to 0+} x f\left(\dfrac{1}{x}\right) = 2
  3. (C)lim⁡x→0+x2f′(x)=0\displaystyle\lim_{x \to 0+} x^2 f'(x) = 0
  4. (D)∣f(x)∣≤2|f(x)| \le 2 for all x∈(0,2)x \in (0, 2)

Tests: Solve a first-order linear ODE and use the condition f(1) ≠ 1 to fix the sign of the constant term.

Show solution
  1. f′+fx=2f' + \dfrac{f}{x} = 2 is linear; multiply by xx: (xf)′=2x(xf)' = 2x, so xf=x2+Cxf = x^2 + C and f(x)=x+Cxf(x) = x + \dfrac{C}{x}.
  2. f(1)=1+C≠1f(1) = 1 + C \ne 1, so C≠0C \ne 0. Also f′(x)=1−Cx2f'(x) = 1 - \dfrac{C}{x^2}.
  3. (A) f′(1/x)=1−Cx2→1f'(1/x) = 1 - Cx^2 \rightarrow 1 as x→0+x \to 0^+. True.
  4. (B) xf(1/x)=x(1x+Cx)=1+Cx2→1≠2x f(1/x) = x\left(\dfrac{1}{x} + Cx\right) = 1 + Cx^2 \rightarrow 1 \ne 2. False.
  5. (C) x2f′(x)=x2−C→−C≠0x^2 f'(x) = x^2 - C \rightarrow -C \ne 0. False.
  6. (D) f(x)=x+C/xf(x) = x + C/x is unbounded as x→0+x \to 0^+ because C≠0C \ne 0. False.

    Why: This is exactly why the paper says f(1) ≠ 1.

AnswerAnswer: (A)
Ask about this question
Q44

Mathematics, Question 44 (4 marks)

Matrices and determinants (adjoint) · +4 / −2
Let P=[3−1−220α3−50]P = \begin{bmatrix} 3 & -1 & -2 \\ 2 & 0 & \alpha \\ 3 & -5 & 0 \end{bmatrix}, where α∈R\alpha \in \mathbb{R}. Suppose Q=[qij]Q = [q_{ij}] is a matrix such that PQ=kIPQ = kI, where k∈Rk \in \mathbb{R}, k≠0k \ne 0 and II is the identity matrix of order 3. If q23=−k8q_{23} = -\dfrac{k}{8} and det⁡(Q)=k22\det(Q) = \dfrac{k^2}{2}, then
  1. (A)α=0,k=8\alpha = 0, k = 8
  2. (B)4α−k+8=04\alpha - k + 8 = 0
  3. (C)det⁡(P adj(Q))=29\det(P\,\mathrm{adj}(Q)) = 2^9
  4. (D)det⁡(Q adj(P))=213\det(Q\,\mathrm{adj}(P)) = 2^{13}

Tests: Use Q = k·adj(P)/|P| to match one entry and the determinant, then apply |adj A| = |A|^(n−1).

Show solution
  1. PQ=kIPQ = kI with k≠0k \ne 0 means Q=kP−1=k∣P∣ adj(P)Q = kP^{-1} = \dfrac{k}{|P|}\,\mathrm{adj}(P).
  2. ∣P∣=3(0+5α)+1(0−3α)−2(−10−0)=12α+20|P| = 3(0 + 5\alpha) + 1(0 - 3\alpha) - 2(-10 - 0) = 12\alpha + 20.
  3. q23=k∣P∣C32q_{23} = \dfrac{k}{|P|}C_{32}, where C32=−∣3−22α∣=−(3α+4)C_{32} = -\begin{vmatrix} 3 & -2 \\ 2 & \alpha \end{vmatrix} = -(3\alpha + 4). So −k(3α+4)12α+20=−k8\dfrac{-k(3\alpha + 4)}{12\alpha + 20} = -\dfrac{k}{8}, giving 24α+32=12α+2024\alpha + 32 = 12\alpha + 20, α=−1\alpha = -1 and ∣P∣=8|P| = 8.

    Why: Entry (2,3) of adj(P) is the cofactor of entry (3,2) of P (transpose).

  4. ∣Q∣=k3∣P∣=k38=k22⇒k=4|Q| = \dfrac{k^3}{|P|} = \dfrac{k^3}{8} = \dfrac{k^2}{2} \Rightarrow k = 4.
  5. (A) α=−1,k=4\alpha = -1, k = 4: False. (B) 4(−1)−4+8=04(-1) - 4 + 8 = 0: True.
  6. (C) ∣P adjQ∣=∣P∣ ∣Q∣2=8×82=29|P\,\mathrm{adj}Q| = |P|\,|Q|^{2} = 8 \times 8^2 = 2^9 (here ∣Q∣=16/2=8|Q| = 16/2 = 8). True.
  7. (D) ∣Q adjP∣=∣Q∣ ∣P∣2=8×64=29≠213|Q\,\mathrm{adj}P| = |Q|\,|P|^2 = 8 \times 64 = 2^9 \ne 2^{13}. False.
AnswerAnswer: (B), (C)
Ask about this question
Q45

Mathematics, Question 45 (4 marks)

Properties of triangles · +4 / −2
In a triangle XYZXYZ, let x,y,zx, y, z be the lengths of sides opposite to the angles X,Y,ZX, Y, Z, respectively, and 2s=x+y+z2s = x + y + z. If s−x4=s−y3=s−z2\dfrac{s - x}{4} = \dfrac{s - y}{3} = \dfrac{s - z}{2} and area of incircle of the triangle XYZXYZ is 8π3\dfrac{8\pi}{3}, then
  1. (A)area of the triangle XYZXYZ is 666\sqrt{6}
  2. (B)the radius of circumcircle of the triangle XYZXYZ is 3566\dfrac{35}{6}\sqrt{6}
  3. (C)sin⁡X2sin⁡Y2sin⁡Z2=435\sin\dfrac{X}{2}\sin\dfrac{Y}{2}\sin\dfrac{Z}{2} = \dfrac{4}{35}
  4. (D)sin⁡2(X+Y2)=35\sin^2\left(\dfrac{X + Y}{2}\right) = \dfrac{3}{5}

Tests: Turn ratios of s − a into side lengths, then use Heron, r = Δ/s, R = abc/4Δ and half-angle formulas.

Show solution
  1. Let s−x=4λs - x = 4\lambda, s−y=3λs - y = 3\lambda, s−z=2λs - z = 2\lambda. Adding: 3s−2s=9λ3s - 2s = 9\lambda, so s=9λs = 9\lambda and x=5λx = 5\lambda, y=6λy = 6\lambda, z=7λz = 7\lambda.
  2. Heron: Δ=9λ⋅4λ⋅3λ⋅2λ=66λ2\Delta = \sqrt{9\lambda \cdot 4\lambda \cdot 3\lambda \cdot 2\lambda} = 6\sqrt{6}\lambda^2; inradius r=Δs=263λr = \dfrac{\Delta}{s} = \dfrac{2\sqrt{6}}{3}\lambda.
  3. πr2=8π3λ2=8π3⇒λ=1\pi r^2 = \dfrac{8\pi}{3}\lambda^2 = \dfrac{8\pi}{3} \Rightarrow \lambda = 1. Sides 5, 6, 7; r=263r = \dfrac{2\sqrt{6}}{3}.
  4. (A) Δ=66\Delta = 6\sqrt{6}. True. (B) R=xyz4Δ=210246=35624≠3566R = \dfrac{xyz}{4\Delta} = \dfrac{210}{24\sqrt{6}} = \dfrac{35\sqrt{6}}{24} \ne \dfrac{35\sqrt{6}}{6}. False.
  5. (C) r=4Rsin⁡X2sin⁡Y2sin⁡Z2r = 4R\sin\dfrac{X}{2}\sin\dfrac{Y}{2}\sin\dfrac{Z}{2}, so the product =r4R=26/335/6=12105=435= \dfrac{r}{4R} = \dfrac{2\sqrt{6}/3}{35/\sqrt{6}} = \dfrac{12}{105} = \dfrac{4}{35}. True.
  6. (D) sin⁡2X+Y2=cos⁡2Z2=s(s−z)xy=9⋅25⋅6=35\sin^2\dfrac{X + Y}{2} = \cos^2\dfrac{Z}{2} = \dfrac{s(s - z)}{xy} = \dfrac{9 \cdot 2}{5 \cdot 6} = \dfrac{3}{5}. True.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q46

Mathematics, Question 46 (4 marks)

Differential equations (homogeneous) · +4 / −2
A solution curve of the differential equation (x2+xy+4x+2y+4)dydx−y2=0(x^2 + xy + 4x + 2y + 4)\dfrac{dy}{dx} - y^2 = 0, x>0x > 0, passes through the point (1,3)(1, 3). Then the solution curve
  1. (A)intersects y=x+2y = x + 2 exactly at one point
  2. (B)intersects y=x+2y = x + 2 exactly at two points
  3. (C)intersects y=(x+2)2y = (x + 2)^2
  4. (D)does NOT intersect y=(x+3)2y = (x + 3)^2

Tests: Shift x to make the equation homogeneous, solve, and test intersections with given curves.

Show solution
  1. Factor: x2+4x+4+y(x+2)=(x+2)(x+2+y)x^2 + 4x + 4 + y(x + 2) = (x + 2)(x + 2 + y). With X=x+2X = x + 2: X(X+y)dydX=y2X(X + y)\dfrac{dy}{dX} = y^2, a homogeneous equation.
  2. Put y=vXy = vX: v+XdvdX=v21+vv + X\dfrac{dv}{dX} = \dfrac{v^2}{1 + v}, so XdvdX=−v1+vX\dfrac{dv}{dX} = -\dfrac{v}{1 + v} and 1+vvdv=−dXX\dfrac{1 + v}{v}dv = -\dfrac{dX}{X}.
  3. Integrate: ln⁡v+v=−ln⁡X+c\ln v + v = -\ln X + c, i.e. ln⁡y+yx+2=c\ln y + \dfrac{y}{x + 2} = c. Through (1,3)(1, 3): c=1+ln⁡3c = 1 + \ln 3.
  4. (A)/(B) On y=x+2y = x + 2: ln⁡(x+2)+1=1+ln⁡3⇒x=1\ln(x + 2) + 1 = 1 + \ln 3 \Rightarrow x = 1, one point only. (A) True, (B) False.
  5. (C) On y=(x+2)2y = (x + 2)^2: 2ln⁡(x+2)+(x+2)=1+ln⁡32\ln(x + 2) + (x + 2) = 1 + \ln 3. For x>0x > 0 the left side exceeds 2ln⁡2+2≈3.39>1+ln⁡3≈2.102\ln 2 + 2 \approx 3.39 > 1 + \ln 3 \approx 2.10. No intersection: False.
  6. (D) On y=(x+3)2y = (x + 3)^2: 2ln⁡(x+3)+(x+3)2x+2>2ln⁡3>1+ln⁡32\ln(x + 3) + \dfrac{(x + 3)^2}{x + 2} > 2\ln 3 > 1 + \ln 3 for x>0x > 0 (as ln⁡3>1\ln 3 > 1). No intersection: True.
AnswerAnswer: (A), (D)
Ask about this question
Q47

Mathematics, Question 47 (4 marks)

Inverse functions and chain rule · +4 / −2
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R}, g:R→Rg : \mathbb{R} \rightarrow \mathbb{R} and h:R→Rh : \mathbb{R} \rightarrow \mathbb{R} be differentiable functions such that f(x)=x3+3x+2f(x) = x^3 + 3x + 2, g(f(x))=xg(f(x)) = x and h(g(g(x)))=xh(g(g(x))) = x for all x∈Rx \in \mathbb{R}. Then
  1. (A)g′(2)=115g'(2) = \dfrac{1}{15}
  2. (B)h′(1)=666h'(1) = 666
  3. (C)h(0)=16h(0) = 16
  4. (D)h(g(3))=36h(g(3)) = 36

Tests: Recognise g as the inverse of f and h as f∘f, then use the inverse-function derivative rule.

Show solution
  1. f′(x)=3x2+3>0f'(x) = 3x^2 + 3 > 0, so ff is a bijection and g=f−1g = f^{-1}. Putting x=f(f(t))x = f(f(t)) in h(g(g(x)))=xh(g(g(x))) = x gives h(t)=f(f(t))h(t) = f(f(t)).
  2. (A) f(0)=2f(0) = 2, so g(2)=0g(2) = 0 and g′(2)=1f′(0)=13g'(2) = \dfrac{1}{f'(0)} = \dfrac{1}{3}. False.
  3. (B) h′(1)=f′(f(1)) f′(1)=f′(6)⋅f′(1)=111×6=666h'(1) = f'(f(1))\,f'(1) = f'(6) \cdot f'(1) = 111 \times 6 = 666. True.
  4. (C) h(0)=f(f(0))=f(2)=8+6+2=16h(0) = f(f(0)) = f(2) = 8 + 6 + 2 = 16. True.
  5. (D) h(g(3))=f(f(g(3)))=f(3)=27+9+2=38≠36h(g(3)) = f(f(g(3))) = f(3) = 27 + 9 + 2 = 38 \ne 36. False.
AnswerAnswer: (B), (C)
Ask about this question
Q48

Mathematics, Question 48 (4 marks)

Circles and tangents · +4 / −2
The circle C1:x2+y2=3C_1 : x^2 + y^2 = 3, with centre at OO, intersects the parabola x2=2yx^2 = 2y at the point PP in the first quadrant. Let the tangent to the circle C1C_1 at PP touches other two circles C2C_2 and C3C_3 at R2R_2 and R3R_3, respectively. Suppose C2C_2 and C3C_3 have equal radii 232\sqrt{3} and centres Q2Q_2 and Q3Q_3, respectively. If Q2Q_2 and Q3Q_3 lie on the yy-axis, then
  1. (A)Q2Q3=12Q_2Q_3 = 12
  2. (B)R2R3=46R_2R_3 = 4\sqrt{6}
  3. (C)area of the triangle OR2R3OR_2R_3 is 626\sqrt{2}
  4. (D)area of the triangle PQ2Q3PQ_2Q_3 is 424\sqrt{2}

Tests: Use the tangent at a point and distance of a centre from a line to locate circles, then compute lengths and areas.

Show solution
  1. x2=2yx^2 = 2y in x2+y2=3x^2 + y^2 = 3: y2+2y−3=0y^2 + 2y - 3 = 0, y=1y = 1 (first quadrant), x=2x = \sqrt{2}. P=(2,1)P = (\sqrt{2}, 1); tangent at PP: 2x+y=3\sqrt{2}x + y = 3.
  2. Centre (0,b)(0, b) at distance 232\sqrt{3} from the tangent: ∣b−3∣3=23⇒b=9\dfrac{|b - 3|}{\sqrt{3}} = 2\sqrt{3} \Rightarrow b = 9 or b=−3b = -3. So Q2Q3=12Q_2Q_3 = 12. (A) True.
  3. (B) Q2,Q3Q_2, Q_3 lie on opposite sides of the tangent, and R2,R3R_2, R_3 are the feet of the perpendiculars. R2R32=Q2Q32−(23+23)2=144−48=96R_2R_3^2 = Q_2Q_3^2 - (2\sqrt{3} + 2\sqrt{3})^2 = 144 - 48 = 96, so R2R3=46R_2R_3 = 4\sqrt{6}. True.

    Why: Q2Q3 is the hypotenuse; the two radii (both perpendicular to the tangent) add to one leg.

  4. (C) Distance of OO from the tangent is 3\sqrt{3} (radius of C1C_1). Area OR2R3=12⋅46⋅3=62OR_2R_3 = \dfrac{1}{2} \cdot 4\sqrt{6} \cdot \sqrt{3} = 6\sqrt{2}. True.
  5. (D) Base Q2Q3=12Q_2Q_3 = 12 on the yy-axis, height = xx-coordinate of P=2P = \sqrt{2}: area =12⋅12⋅2=62≠42= \dfrac{1}{2} \cdot 12 \cdot \sqrt{2} = 6\sqrt{2} \ne 4\sqrt{2}. False.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q49

Mathematics, Question 49 (4 marks)

Locus (circle) · +4 / −2
Let RSRS be the diameter of the circle x2+y2=1x^2 + y^2 = 1, where SS is the point (1,0)(1, 0). Let PP be a variable point (other than RR and SS) on the circle and tangents to the circle at SS and PP meet at the point QQ. The normal to the circle at PP intersects a line drawn through QQ parallel to RSRS at point EE. Then the locus of EE passes through the point(s)
  1. (A)(13,13)\left(\dfrac{1}{3}, \dfrac{1}{\sqrt{3}}\right)
  2. (B)(14,12)\left(\dfrac{1}{4}, \dfrac{1}{2}\right)
  3. (C)(13,−13)\left(\dfrac{1}{3}, -\dfrac{1}{\sqrt{3}}\right)
  4. (D)(14,−12)\left(\dfrac{1}{4}, -\dfrac{1}{2}\right)

Tests: Parametrise a point on the circle, find the intersection point E and eliminate the parameter.

Show solution
  1. R=(−1,0)R = (-1, 0), so RSRS is along the xx-axis. Let P=(cos⁡θ,sin⁡θ)P = (\cos\theta, \sin\theta). Tangent at SS: x=1x = 1; tangent at PP: xcos⁡θ+ysin⁡θ=1x\cos\theta + y\sin\theta = 1.
  2. At x=1x = 1: y=1−cos⁡θsin⁡θ=tan⁡θ2y = \dfrac{1 - \cos\theta}{\sin\theta} = \tan\dfrac{\theta}{2}. So Q=(1,tan⁡θ2)Q = \left(1, \tan\dfrac{\theta}{2}\right) and the line through QQ parallel to RSRS is y=tan⁡θ2y = \tan\dfrac{\theta}{2}.
  3. The normal at PP passes through the centre: y=xtan⁡θy = x\tan\theta. Let t=tan⁡θ2t = \tan\dfrac{\theta}{2}; then EE has y=ty = t and x=ttan⁡θ=t(1−t2)2t=1−t22x = \dfrac{t}{\tan\theta} = \dfrac{t(1 - t^2)}{2t} = \dfrac{1 - t^2}{2}.
  4. Locus: x=1−y22x = \dfrac{1 - y^2}{2}, i.e. y2=1−2xy^2 = 1 - 2x.
  5. (A), (C): 13=1−23\dfrac{1}{3} = 1 - \dfrac{2}{3} ✓, so both (13,±13)\left(\dfrac{1}{3}, \pm\dfrac{1}{\sqrt{3}}\right) lie on it. (B), (D): 14\dfrac{1}{4} vs 1−12=121 - \dfrac{1}{2} = \dfrac{1}{2} ✗.
AnswerAnswer: (A), (C)
Ask about this question

Mathematics, Section 3: 5 questions, answer is a single digit integer from 0 to 9: +3 if correct, 0 in all other cases (no negative marks)

Q50

Mathematics, Question 50 (3 marks)

Determinants · +3
The total number of distinct x∈Rx \in \mathbb{R} for which ∣xx21+x32x4x21+8x33x9x21+27x3∣=10\begin{vmatrix} x & x^2 & 1 + x^3 \\ 2x & 4x^2 & 1 + 8x^3 \\ 3x & 9x^2 & 1 + 27x^3 \end{vmatrix} = 10 is

Tests: Factor common terms from columns and split a determinant into a polynomial in x.

Show solution
  1. Take xx out of column 1 and x2x^2 out of column 2: D=x3∣111+x3241+8x3391+27x3∣D = x^3\begin{vmatrix} 1 & 1 & 1 + x^3 \\ 2 & 4 & 1 + 8x^3 \\ 3 & 9 & 1 + 27x^3 \end{vmatrix}.
  2. Split column 3: D=x3(∣111241391∣+x3∣1112483927∣)D = x^3\left(\begin{vmatrix} 1 & 1 & 1 \\ 2 & 4 & 1 \\ 3 & 9 & 1 \end{vmatrix} + x^3\begin{vmatrix} 1 & 1 & 1 \\ 2 & 4 & 8 \\ 3 & 9 & 27 \end{vmatrix}\right).
  3. First determinant: 1(4−9)−1(2−3)+1(18−12)=21(4 - 9) - 1(2 - 3) + 1(18 - 12) = 2. Second: 1(108−72)−1(54−24)+1(18−12)=121(108 - 72) - 1(54 - 24) + 1(18 - 12) = 12.
  4. D=2x3+12x6=10⇒6x6+x3−5=0⇒(6x3−5)(x3+1)=0D = 2x^3 + 12x^6 = 10 \Rightarrow 6x^6 + x^3 - 5 = 0 \Rightarrow (6x^3 - 5)(x^3 + 1) = 0.
  5. x3=56x^3 = \dfrac{5}{6} or x3=−1x^3 = -1: each gives exactly one real xx. Two distinct real values.
AnswerAnswer: 2
Ask about this question
Q51

Mathematics, Question 51 (3 marks)

Binomial theorem · +3
Let mm be the smallest positive integer such that the coefficient of x2x^2 in the expansion of (1+x)2+(1+x)3+⋯+(1+x)49+(1+mx)50(1 + x)^2 + (1 + x)^3 + \cdots + (1 + x)^{49} + (1 + mx)^{50} is (3n+1) 51C3(3n + 1)\,{}^{51}C_3 for some positive integer nn. Then the value of nn is

Tests: Sum binomial coefficients with the hockey-stick identity and solve a divisibility condition.

Show solution
  1. Coefficient of x2x^2: ∑k=249(k2)+(502)m2=(503)+(502)m2\sum_{k=2}^{49}\binom{k}{2} + \binom{50}{2}m^2 = \binom{50}{3} + \binom{50}{2}m^2 (hockey-stick identity).
  2. Since (513)=(503)+(502)\binom{51}{3} = \binom{50}{3} + \binom{50}{2}, the condition becomes (502)(m2−1)=3n(513)\binom{50}{2}(m^2 - 1) = 3n\binom{51}{3}.
  3. (513)/(502)=208251225=17\binom{51}{3} \big/ \binom{50}{2} = \dfrac{20825}{1225} = 17, so m2−1=51nm^2 - 1 = 51n.
  4. Need m2≡1(mod51)m^2 \equiv 1 \pmod{51} with n≥1n \ge 1, so m>1m > 1. Modulo 17, m≡±1m \equiv \pm 1; the smallest such m>1m > 1 is 1616, and 162−1=255=51×516^2 - 1 = 255 = 51 \times 5 ✓.
  5. So m=16m = 16 and n=5n = 5.
AnswerAnswer: 5
Ask about this question
Q52

Mathematics, Question 52 (3 marks)

Definite integrals (number of solutions) · +3
The total number of distinct x∈[0,1]x \in [0, 1] for which ∫0xt21+t4 dt=2x−1\displaystyle\int_0^x \dfrac{t^2}{1 + t^4}\,dt = 2x - 1 is

Tests: Count roots of an equation involving an integral using monotonicity and the intermediate value theorem.

Show solution
  1. Let F(x)=∫0xt21+t4 dt−2x+1F(x) = \displaystyle\int_0^x \dfrac{t^2}{1 + t^4}\,dt - 2x + 1. Then F′(x)=x21+x4−2F'(x) = \dfrac{x^2}{1 + x^4} - 2.
  2. x21+x4≤12\dfrac{x^2}{1 + x^4} \le \dfrac{1}{2} (AM-GM: 1+x4≥2x21 + x^4 \ge 2x^2), so F′(x)<0F'(x) < 0: FF is strictly decreasing.
  3. F(0)=1>0F(0) = 1 > 0 and F(1)≤12−1<0F(1) \le \dfrac{1}{2} - 1 < 0 (the integral over [0,1][0, 1] is at most 12\dfrac{1}{2}).
  4. A strictly decreasing continuous function changing sign on [0,1][0, 1] has exactly one root.
AnswerAnswer: 1
Ask about this question
Q53

Mathematics, Question 53 (3 marks)

Limits (series expansion) · +3
Let α,β∈R\alpha, \beta \in \mathbb{R} be such that lim⁡x→0x2sin⁡(βx)αx−sin⁡x=1\displaystyle\lim_{x \to 0} \dfrac{x^2\sin(\beta x)}{\alpha x - \sin x} = 1. Then 6(α+β)6(\alpha + \beta) equals

Tests: Match leading powers in the Taylor expansions of numerator and denominator.

Show solution
  1. Numerator: x2sin⁡(βx)=βx3+O(x5)x^2\sin(\beta x) = \beta x^3 + O(x^5).
  2. Denominator: αx−sin⁡x=(α−1)x+x36−⋯\alpha x - \sin x = (\alpha - 1)x + \dfrac{x^3}{6} - \cdots.
  3. If α≠1\alpha \ne 1 the denominator is of order xx and the limit is 00, not 11. So α=1\alpha = 1.
  4. Then the limit is βx3x3/6=6β=1\dfrac{\beta x^3}{x^3/6} = 6\beta = 1, so β=16\beta = \dfrac{1}{6}.
  5. 6(α+β)=6+1=76(\alpha + \beta) = 6 + 1 = 7.
AnswerAnswer: 7
Ask about this question
Q54

Mathematics, Question 54 (3 marks)

Complex numbers (cube roots of unity) and matrices · +3
Let z=−1+3i2z = \dfrac{-1 + \sqrt{3}i}{2}, where i=−1i = \sqrt{-1}, and r,s∈{1,2,3}r, s \in \{1, 2, 3\}. Let P=[(−z)rz2sz2szr]P = \begin{bmatrix} (-z)^r & z^{2s} \\ z^{2s} & z^r \end{bmatrix} and II be the identity matrix of order 2. Then the total number of ordered pairs (r,s)(r, s) for which P2=−IP^2 = -I is

Tests: Square a 2×2 matrix of powers of ω and use ω³ = 1, 1 + ω + ω² = 0 to solve the conditions.

Show solution
  1. z=ωz = \omega, a cube root of unity: ω3=1\omega^3 = 1, 1+ω+ω2=01 + \omega + \omega^2 = 0. Write a=(−ω)ra = (-\omega)^r, b=ω2sb = \omega^{2s}, c=ωrc = \omega^r.
  2. P2=[a2+b2b(a+c)b(a+c)b2+c2]P^2 = \begin{bmatrix} a^2 + b^2 & b(a + c) \\ b(a + c) & b^2 + c^2 \end{bmatrix}. Since b≠0b \ne 0, P2=−IP^2 = -I needs a+c=0a + c = 0: ωr((−1)r+1)=0\omega^r\left((-1)^r + 1\right) = 0, so rr is odd (r=1r = 1 or 33).
  3. Also a2=c2=ω2ra^2 = c^2 = \omega^{2r}, so we need ω2r+ω4s=−1\omega^{2r} + \omega^{4s} = -1.
  4. r=1r = 1: ω2+ω4s=−1\omega^2 + \omega^{4s} = -1 needs ω4s=ω\omega^{4s} = \omega, i.e. 4s≡1(mod3)4s \equiv 1 \pmod 3, so s=1s = 1. r=3r = 3: 1+ω4s=−11 + \omega^{4s} = -1 needs ω4s=−2\omega^{4s} = -2, impossible.
  5. Only (r,s)=(1,1)(r, s) = (1, 1) works.
AnswerAnswer: 1
Ask about this question

Questions are quoted from JEE (Advanced) 2016 Paper 1 (English); figures are described in words. Every final answer is checked against the official final answer key. Where the official key accepts more than one answer, or gave every candidate full marks, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.