AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2016 Paper 2: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2016 Paper 2 solved step by step: Physics, Chemistry and Mathematics, with the official answer key and the marking of each section. Every final answer is checked against the official answer key.

JEE (Advanced) 2016 Paper 2: 54 questions, 186 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2016: Paper 1.

Physics, Section 1: 6 questions, only one option correct: +3 if only the correct option is darkened, 0 if none is darkened, −1 in all other cases

Q1

Physics, Question 1 (3 marks)

Nuclear physics (binding energy) · +3 / −1
The electrostatic energy of ZZ protons uniformly distributed throughout a spherical nucleus of radius RR is given by E=35Z(Z−1)e24πε0RE = \dfrac{3}{5}\dfrac{Z(Z-1)e^2}{4\pi\varepsilon_0 R}. The measured masses of the neutron, 11H^1_1\mathrm{H}, 715N^{15}_{7}\mathrm{N} and 815O^{15}_{8}\mathrm{O} are 1.008665 u, 1.007825 u, 15.000109 u and 15.003065 u, respectively. Given that the radii of both the 715N^{15}_{7}\mathrm{N} and 815O^{15}_{8}\mathrm{O} nuclei are same, 1 u=931.5 MeV/c21\ \mathrm{u} = 931.5\ \mathrm{MeV}/c^2 (cc is the speed of light) and e2/(4πε0)=1.44 MeV fme^2/(4\pi\varepsilon_0) = 1.44\ \mathrm{MeV\,fm}. Assuming that the difference between the binding energies of 715N^{15}_{7}\mathrm{N} and 815O^{15}_{8}\mathrm{O} is purely due to the electrostatic energy, the radius of either of the nuclei is (1 fm=10−15 m1\ \mathrm{fm} = 10^{-15}\ \mathrm{m})
  1. (A)2.85 fm
  2. (B)3.03 fm
  3. (C)3.42 fm
  4. (D)3.80 fm

Tests: Use mirror nuclei to relate a binding-energy difference to the Coulomb energy and find the nuclear radius.

Show solution
  1. Binding energy B=[ZmH+Nmn−M]c2B = [Z m_H + N m_n - M]c^2, using the hydrogen-atom mass so the electron masses cancel. 15N^{15}\mathrm{N}: Z=7Z = 7, N=8N = 8. 15O^{15}\mathrm{O}: Z=8Z = 8, N=7N = 7.
  2. BN−BO=[7mH+8mn−MN]−[8mH+7mn−MO]=(mn−mH)+(MO−MN)B_N - B_O = [7m_H + 8m_n - M_N] - [8m_H + 7m_n - M_O] = (m_n - m_H) + (M_O - M_N).

    Why: Everything else cancels because the two nuclei are mirror nuclei.

  3. =(1.008665−1.007825)+(15.003065−15.000109)=0.000840+0.002956=0.003796 u= (1.008665 - 1.007825) + (15.003065 - 15.000109) = 0.000840 + 0.002956 = 0.003796\ \mathrm{u}, i.e. 0.003796×931.5=3.536 MeV0.003796 \times 931.5 = 3.536\ \mathrm{MeV}.
  4. Oxygen has the larger Coulomb energy: EO−EN=35⋅1.44R [8⋅7−7⋅6]=35⋅1.44×14R=12.096R MeVE_O - E_N = \dfrac{3}{5}\cdot\dfrac{1.44}{R}\,[8 \cdot 7 - 7 \cdot 6] = \dfrac{3}{5}\cdot\dfrac{1.44 \times 14}{R} = \dfrac{12.096}{R}\ \mathrm{MeV} (RR in fm).

    Why: Extra Coulomb repulsion lowers the binding energy of O, so this difference equals B_N − B_O.

  5. 12.096R=3.536⇒R=3.42 fm\dfrac{12.096}{R} = 3.536 \Rightarrow R = 3.42\ \mathrm{fm}.
AnswerAnswer: (C) 3.42 fm
Ask about this question
Q2

Physics, Question 2 (3 marks)

Radioactivity (half-life) · +3 / −1
An accident in a nuclear laboratory resulted in deposition of a certain amount of radioactive material of half-life 18 days inside the laboratory. Tests revealed that the radiation was 64 times more than the permissible level required for safe operation of the laboratory. What is the minimum number of days after which the laboratory can be considered safe for use?
  1. (A)64
  2. (B)90
  3. (C)108
  4. (D)120

Tests: Find the time for activity to fall by a given factor using half-lives.

Show solution
  1. Activity falls as A=A0 (1/2)t/T1/2A = A_0\,(1/2)^{t/T_{1/2}}. We need A0/A=64A_0/A = 64.
  2. 64=2664 = 2^6, so six half-lives must pass.
  3. t=6×18=108t = 6 \times 18 = 108 days.
AnswerAnswer: (C) 108 days
Ask about this question
Q3

Physics, Question 3 (3 marks)

Thermodynamics (first law, processes) · +3 / −1
A gas is enclosed in a cylinder with a movable frictionless piston. Its initial thermodynamic state at pressure Pi=105 PaP_i = 10^5\ \mathrm{Pa} and volume Vi=10−3 m3V_i = 10^{-3}\ \mathrm{m^3} changes to a final state at Pf=(1/32)×105 PaP_f = (1/32) \times 10^5\ \mathrm{Pa} and Vf=8×10−3 m3V_f = 8 \times 10^{-3}\ \mathrm{m^3} in an adiabatic quasi-static process, such that P3V5=P^3V^5 = constant. Consider another thermodynamic process that brings the system from the same initial state to the same final state in two steps: an isobaric expansion at PiP_i followed by an isochoric (isovolumetric) process at volume VfV_f. The amount of heat supplied to the system in the two-step process is approximately
  1. (A)112 J
  2. (B)294 J
  3. (C)588 J
  4. (D)813 J

Tests: Use the state function ΔU from one path to find heat in another path between the same states.

Show solution
  1. P3V5=P^3V^5 = const means PV5/3=PV^{5/3} = const for a quasi-static adiabatic process, so γ=5/3\gamma = 5/3 and ΔU=PfVf−PiViγ−1\Delta U = \dfrac{P_fV_f - P_iV_i}{\gamma - 1}.

    Why: U depends only on the state, so the same ΔU holds for any path between i and f.

  2. PiVi=100 JP_iV_i = 100\ \mathrm{J}, PfVf=10532×8×10−3=25 JP_fV_f = \dfrac{10^5}{32} \times 8 \times 10^{-3} = 25\ \mathrm{J}, so ΔU=25−1002/3=−112.5 J\Delta U = \dfrac{25 - 100}{2/3} = -112.5\ \mathrm{J}.
  3. Work in the two-step path: only the isobaric step does work, W=Pi(Vf−Vi)=105×7×10−3=700 JW = P_i(V_f - V_i) = 10^5 \times 7 \times 10^{-3} = 700\ \mathrm{J}.
  4. First law: Q=ΔU+W=−112.5+700=587.5≈588 JQ = \Delta U + W = -112.5 + 700 = 587.5 \approx 588\ \mathrm{J}.
AnswerAnswer: (C) 588 J
Ask about this question
Q4

Physics, Question 4 (3 marks)

Heat conduction and thermal expansion · +3 / −1
The ends Q and R of two thin wires, PQ and RS, are soldered (joined) together. Initially each of the wires has a length of 1 m at 10 °C. Now the end P is maintained at 10 °C, while the end S is heated and maintained at 400 °C. The system is thermally insulated from its surroundings. If the thermal conductivity of wire PQ is twice that of the wire RS and the coefficient of linear thermal expansion of PQ is 1.2×10−5 K−11.2 \times 10^{-5}\ \mathrm{K^{-1}}, the change in length of the wire PQ is
  1. (A)0.78 mm
  2. (B)0.90 mm
  3. (C)1.56 mm
  4. (D)2.34 mm

Tests: Find the junction temperature of two conductors in series and the expansion of a wire with a temperature gradient.

Show solution
  1. Steady state: same heat current through both wires (equal lengths and, as implied, equal cross-sections). With junction temperature TT: 2k (T−10)=k (400−T)2k\,(T - 10) = k\,(400 - T).
  2. 3T=420⇒T=140 ∘C3T = 420 \Rightarrow T = 140\ ^\circ\mathrm{C}.
  3. Along PQ the temperature rises linearly from 10 °C to 140 °C, so each element dxdx at temperature rise Δθ(x)\Delta\theta(x) grows by α Δθ(x) dx\alpha\,\Delta\theta(x)\,dx. Total: ΔL=α∫0LΔθ dx=αL Δθ‾\Delta L = \alpha \int_0^{L} \Delta\theta\,dx = \alpha L\,\overline{\Delta\theta} with mean rise 0+1302=65 K\dfrac{0 + 130}{2} = 65\ \mathrm{K}.

    Why: A linear temperature profile means the average rise is half the end-to-end rise.

  4. ΔL=1.2×10−5×1×65=7.8×10−4 m=0.78 mm\Delta L = 1.2 \times 10^{-5} \times 1 \times 65 = 7.8 \times 10^{-4}\ \mathrm{m} = 0.78\ \mathrm{mm}.
AnswerAnswer: (A) 0.78 mm
Ask about this question
Q5

Physics, Question 5 (3 marks)

Ray optics (lens and mirror combination) · +3 / −1
A small object is placed 50 cm to the left of a thin convex lens of focal length 30 cm. A convex spherical mirror of radius of curvature 100 cm is placed to the right of the lens at a distance of 50 cm. The mirror is tilted such that the axis of the mirror is at an angle θ=30∘\theta = 30^\circ to the axis of the lens, as shown in the figure. (The figure shows the lens at the origin (0,0)(0, 0) with its axis along the x-axis, the object at (−50,0)(-50, 0), and the mirror's pole on the x-axis at 50 cm from the lens. The mirror's reflecting convex face points back towards the lens, and its axis, drawn dashed through the pole, makes θ=30∘\theta = 30^\circ with the x-axis; its centre of curvature, at distance R=100R = 100 cm from the pole, is at (50+503,−50)(50 + 50\sqrt{3}, -50).) If the origin of the coordinate system is taken to be at the centre of the lens, the coordinates (in cm) of the point (x,y)(x, y) at which the image is formed are
  1. (A)(0,0)(0, 0)
  2. (B)(50−253,25)(50 - 25\sqrt{3}, 25)
  3. (C)(25,253)(25, 25\sqrt{3})
  4. (D)(125/3,25/3)(125/3, 25/\sqrt{3})

Tests: Trace an image through a lens and then a tilted mirror, using the reflected ray direction to place it.

Show solution
  1. Lens: 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f} with u=−50u = -50, f=30f = 30: 1v=130−150=175\dfrac{1}{v} = \dfrac{1}{30} - \dfrac{1}{50} = \dfrac{1}{75}, so v=75v = 75 cm. The image would form at (75,0)(75, 0).
  2. The mirror at x=50x = 50 intercepts the converging light, so (75,0)(75, 0) is a virtual object 25 cm behind the pole, along the ray (the lens axis) that strikes the pole.
  3. Mirror formula along that ray (convex mirror, f=+50f = +50 cm, virtual object u=+25u = +25 cm): 1v=150−125=−150\dfrac{1}{v} = \dfrac{1}{50} - \dfrac{1}{25} = -\dfrac{1}{50}, so v=−50v = -50 cm: a real image 50 cm in front of the mirror.

    Why: The question intends the first-order method: distances measured along the ray through the pole. An exact oblique-incidence treatment is astigmatic; the question ignores that.

  4. Direction of the reflected ray: the normal at the pole lies along the mirror's axis, at 30° below the x-axis. The ray along +x+x makes 30° with the normal, so it reflects at 30° on the other side of the normal: the reflected ray leaves at 180∘−60∘=120∘180^\circ - 60^\circ = 120^\circ from +x+x, i.e. up and back towards the lens.
  5. Image: 50 cm from the pole along 120∘120^\circ: (50+50cos⁡120∘, 50sin⁡120∘)=(25,253)(50 + 50\cos 120^\circ,\ 50\sin 120^\circ) = (25, 25\sqrt{3}).
AnswerAnswer: (C) (25,253)(25, 25\sqrt{3})
Ask about this question
Q6

Physics, Question 6 (3 marks)

Measuring instruments (vernier calipers) · +3 / −1
There are two Vernier calipers both of which have 1 cm divided into 10 equal divisions on the main scale. The Vernier scale of one of the calipers (C1C_1) has 10 equal divisions that correspond to 9 main scale divisions. The Vernier scale of the other caliper (C2C_2) has 10 equal divisions that correspond to 11 main scale divisions. The readings of the two calipers are shown in the figure. The measured values (in cm) by calipers C1C_1 and C2C_2, respectively, are (The figure shows both main scales from 2 to 4 cm in millimetre divisions. For C1C_1 the vernier zero lies between the 2.8 cm and 2.9 cm marks, and the 7th vernier division lines up with a main-scale mark (3.5 cm). For C2C_2 the vernier zero also lies between 2.8 cm and 2.9 cm, and its 7th vernier division lines up with a main-scale mark (3.6 cm).)
  1. (A)2.85 and 2.82
  2. (B)2.87 and 2.83
  3. (C)2.87 and 2.86
  4. (D)2.87 and 2.87

Tests: Read a vernier caliper, including one whose vernier divisions are longer than the main-scale divisions.

Show solution
  1. Main scale division =1= 1 mm. C1C_1: vernier division =0.9= 0.9 mm, least count =1−0.9=0.1= 1 - 0.9 = 0.1 mm =0.01= 0.01 cm.
  2. C1C_1 reading == MSR ++ (coinciding division)×\timesLC =2.8+7×0.01=2.87= 2.8 + 7 \times 0.01 = 2.87 cm.
  3. C2C_2: vernier division =1.1= 1.1 mm, longer than a main division. Let the vernier zero sit at 2.8 cm+δ2.8\ \mathrm{cm} + \delta. The 7th vernier mark is at 2.8+δ+7×0.112.8 + \delta + 7 \times 0.11 cm and coincides with the 3.6 cm mark: δ=0.8−0.77=0.03\delta = 0.8 - 0.77 = 0.03 cm.

    Why: With 10 VSD = 11 MSD the usual MSR + n×LC rule fails; work from where the marks sit.

  4. C2C_2 reading =2.8+0.03=2.83= 2.8 + 0.03 = 2.83 cm. Equivalently, reading == MSR +(10−n)×0.01+ (10 - n) \times 0.01 cm with n=7n = 7.
AnswerAnswer: (B) 2.87 cm and 2.83 cm
Ask about this question

Physics, Section 2: 8 questions, one or more options correct: +4 if only all the correct options are darkened; partial +1 for each correct option darkened, provided no incorrect option is darkened; 0 if none is darkened; −2 in all other cases

Q7

Physics, Question 7 (4 marks)

Rotational dynamics (rolling, angular momentum) · +4 / −2
Two thin circular discs of mass mm and 4m4m, having radii of aa and 2a2a, respectively, are rigidly fixed by a massless, rigid rod of length l=24 al = \sqrt{24}\,a through their centers. This assembly is laid on a firm and flat surface, and set rolling without slipping on the surface so that the angular speed about the axis of the rod is ω\omega. The angular momentum of the entire assembly about the point 'O' is L⃗\vec{L} (see the figure). Which of the following statement(s) is(are) true? (The figure shows both discs standing on the horizontal surface with the rod tilted up from the small disc to the large one. Extended, the rod's axis meets the surface at O, a distance ll from the small disc's centre; the large disc's centre is a further ll along the rod. The z-axis is vertical through O, and ω\omega is the spin about the rod's axis.)
  1. (A)The center of mass of the assembly rotates about the z-axis with an angular speed of ω/5\omega/5
  2. (B)The magnitude of angular momentum of center of mass of the assembly about the point O is 81ma2ω81ma^2\omega
  3. (C)The magnitude of angular momentum of the assembly about its center of mass is 17ma2ω/217ma^2\omega/2
  4. (D)The magnitude of the z-component of L⃗\vec{L} is 55ma2ω55ma^2\omega

Tests: Use the rolling condition for a cone-like body to find its precession rate and its angular momentum.

Show solution
  1. Geometry: the small disc's contact point is 24a2+a2=5a\sqrt{24a^2 + a^2} = 5a from O and the large one's is 96a2+4a2=10a\sqrt{96a^2 + 4a^2} = 10a, both on one line through O: the assembly rolls like a cone with apex O. The rod makes angle α\alpha with the floor, tan⁡α=a24a\tan\alpha = \dfrac{a}{\sqrt{24}a}: sin⁡α=15\sin\alpha = \dfrac{1}{5}, cos⁡α=245\cos\alpha = \dfrac{\sqrt{24}}{5}.
  2. Rolling: the total angular velocity lies along the contact line (horizontal). Write it as precession Ω\Omega about z plus spin ω\omega along the rod; the vertical part must cancel, so Ω=ωsin⁡α=ω/5\Omega = \omega\sin\alpha = \omega/5, and the total is W=ωcos⁡α=245ωW = \omega\cos\alpha = \dfrac{\sqrt{24}}{5}\omega along the contact line. (A) true.

    Why: The contact points are at rest, so the instantaneous axis is the line of contact.

  3. (B): the centre of mass is m24a+4m⋅224a5m=9245a\dfrac{m\sqrt{24}a + 4m \cdot 2\sqrt{24}a}{5m} = \dfrac{9\sqrt{24}}{5}a from O along the rod; its circle about z has radius 9245acos⁡α=21625a\dfrac{9\sqrt{24}}{5}a\cos\alpha = \dfrac{216}{25}a, speed ω5⋅216a25\dfrac{\omega}{5}\cdot\dfrac{216a}{25}. L=5m⋅924a5⋅216aω125≈76.2 ma2ωL = 5m \cdot \dfrac{9\sqrt{24}a}{5} \cdot \dfrac{216a\omega}{125} \approx 76.2\,ma^2\omega, not 81. (B) false.
  4. (C): spin alone gives Iaxis ω=(ma22+4m(2a)22)ω=172ma2ωI_{axis}\,\omega = \left(\dfrac{ma^2}{2} + \dfrac{4m(2a)^2}{2}\right)\omega = \dfrac{17}{2}ma^2\omega. But the total angular velocity has an axial part ωcos⁡2α=2425ω\omega\cos^2\alpha = \dfrac{24}{25}\omega and a part 2425ω\dfrac{\sqrt{24}}{25}\omega perpendicular to the rod; with I⊥I_\perp about the CM =174ma2+19.2 ma2=23.45 ma2= \dfrac{17}{4}ma^2 + 19.2\,ma^2 = 23.45\,ma^2, ∣Lcm∣=(8.16)2+(4.60)2 ma2ω≈9.37 ma2ω|L_{cm}| = \sqrt{(8.16)^2 + (4.60)^2}\,ma^2\omega \approx 9.37\,ma^2\omega. So (C) is exact only if the precession's contribution is ignored.
  5. (D): about O, Iaxis=172ma2I_{axis} = \dfrac{17}{2}ma^2 and I⊥=174ma2+24ma2+384ma2=412.25 ma2I_\perp = \dfrac{17}{4}ma^2 + 24ma^2 + 384ma^2 = 412.25\,ma^2. Lz=Wsin⁡αcos⁡α (Iaxis−I⊥)=24125ω×(−403.75) ma2L_z = W\sin\alpha\cos\alpha\,(I_{axis} - I_\perp) = \dfrac{24}{125}\omega \times (-403.75)\,ma^2, magnitude ≈77.5 ma2ω\approx 77.5\,ma^2\omega, not 55. (D) false.
  6. Why the key reads "(A) OR (A) and (C)": many solvers read "angular momentum about the centre of mass" as the spin angular momentum Iaxisω=17ma2ω/2I_{axis}\omega = 17ma^2\omega/2, which makes (C) true; strictly it is about 9.37 ma2ω9.37\,ma^2\omega. The examiners accepted both readings. The exact physics gives (A) alone.
AnswerAnswer: (A) (the official key also accepts (A) and (C))
Ask about this question
Q8

Physics, Question 8 (4 marks)

Photoelectric effect and de Broglie wavelength · +4 / −2
Light of wavelength λph\lambda_{ph} falls on a cathode plate inside a vacuum tube as shown in the figure. The work function of the cathode surface is ϕ\phi and the anode is a wire mesh of conducting material kept at a distance dd from the cathode. A potential difference VV is maintained between the electrodes. If the minimum de Broglie wavelength of the electrons passing through the anode is λe\lambda_e, which of the following statement(s) is(are) true? (The figure shows light falling on the cathode plate at one end of an evacuated tube; electrons travel to the wire-mesh anode at the other end and pass through it. A battery of voltage VV has its − terminal on the cathode and its + terminal on the anode, so the electrons are accelerated.)
  1. (A)λe\lambda_e decreases with increase in ϕ\phi and λph\lambda_{ph}
  2. (B)λe\lambda_e is approximately halved, if dd is doubled
  3. (C)For large potential difference (V≫ϕ/eV \gg \phi/e), λe\lambda_e is approximately halved if VV is made four times
  4. (D)λe\lambda_e increases at the same rate as λph\lambda_{ph} for λph<hc/ϕ\lambda_{ph} < hc/\phi

Tests: Combine the photoelectric equation with acceleration through V to find the de Broglie wavelength of photoelectrons.

Show solution
  1. Fastest electron at the anode: K=hcλph−ϕ+eVK = \dfrac{hc}{\lambda_{ph}} - \phi + eV, and λe=h2mK\lambda_e = \dfrac{h}{\sqrt{2mK}}.
  2. (A): raising ϕ\phi or λph\lambda_{ph} lowers KK, so λe\lambda_e increases. False.
  3. (B): KK depends on VV, not on the gap dd. False.
  4. (C): for eV≫ϕeV \gg \phi (and the photon term), K≈eVK \approx eV, so λe∝V−1/2\lambda_e \propto V^{-1/2}; 4V4V halves λe\lambda_e. True.
  5. (D): λe=h/2m(hcλph−ϕ+eV)\lambda_e = h\big/\sqrt{2m\left(\dfrac{hc}{\lambda_{ph}} - \phi + eV\right)} is not linear in λph\lambda_{ph}, so it does not change at the same rate. False.
AnswerAnswer: (C)
Ask about this question
Q9

Physics, Question 9 (4 marks)

Errors in measurement · +4 / −2
In an experiment to determine the acceleration due to gravity gg, the formula used for the time period of a periodic motion is T=2π7(R−r)5gT = 2\pi\sqrt{\dfrac{7(R - r)}{5g}}. The values of RR and rr are measured to be (60±1)(60 \pm 1) mm and (10±1)(10 \pm 1) mm, respectively. In five successive measurements, the time period is found to be 0.52 s, 0.56 s, 0.57 s, 0.54 s and 0.59 s. The least count of the watch used for the measurement of time period is 0.01 s. Which of the following statement(s) is(are) true?
  1. (A)The error in the measurement of rr is 10%
  2. (B)The error in the measurement of TT is 3.57%
  3. (C)The error in the measurement of TT is 2%
  4. (D)The error in the determined value of gg is 11%

Tests: Find mean absolute error from repeated readings and combine relative errors in a formula.

Show solution
  1. (A): Δrr=110=10%\dfrac{\Delta r}{r} = \dfrac{1}{10} = 10\%. True.
  2. Mean T=0.52+0.56+0.57+0.54+0.595=0.556≈0.56T = \dfrac{0.52 + 0.56 + 0.57 + 0.54 + 0.59}{5} = 0.556 \approx 0.56 s. Absolute deviations: 0.036, 0.004, 0.014, 0.016, 0.034; mean =0.0208≈0.02= 0.0208 \approx 0.02 s (larger than the least count, so it sets the error).
  3. ΔTT=0.020.56=3.57%\dfrac{\Delta T}{T} = \dfrac{0.02}{0.56} = 3.57\%. (B) true, (C) false.
  4. g=28π2(R−r)5T2g = \dfrac{28\pi^2(R - r)}{5T^2}, so Δgg=ΔR+ΔrR−r+2ΔTT=250+2(3.57%)=4%+7.14%≈11%\dfrac{\Delta g}{g} = \dfrac{\Delta R + \Delta r}{R - r} + 2\dfrac{\Delta T}{T} = \dfrac{2}{50} + 2(3.57\%) = 4\% + 7.14\% \approx 11\%. (D) true.

    Why: Errors in a difference add as absolute errors; then the power 2 of T doubles its relative error.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Galvanometer conversion (ammeter and voltmeter) · +4 / −2
Consider two identical galvanometers and two identical resistors with resistance RR. If the internal resistance of the galvanometers RC<R/2R_C < R/2, which of the following statement(s) about any one of the galvanometers is(are) true?
  1. (A)The maximum voltage range is obtained when all the components are connected in series
  2. (B)The maximum voltage range is obtained when the two resistors and one galvanometer are connected in series, and the second galvanometer is connected in parallel to the first galvanometer
  3. (C)The maximum current range is obtained when all the components are connected in parallel
  4. (D)The maximum current range is obtained when the two galvanometers are connected in series and the combination is connected in parallel with both the resistors

Tests: Compare voltage and current ranges of galvanometer-resistor combinations.

Show solution
  1. Let IgI_g be the full-scale current of a galvanometer. A range is the total voltage (or current) the combination takes when one galvanometer reads full scale.
  2. (A) all in series: VA=Ig(2RC+2R)V_A = I_g(2R_C + 2R).
  3. (B) the two galvanometers in parallel carry 2Ig2I_g in total through RC/2R_C/2, then 2R2R in series: VB=2Ig(RC2+2R)=Ig(RC+4R)V_B = 2I_g\left(\dfrac{R_C}{2} + 2R\right) = I_g(R_C + 4R). VB−VA=Ig(2R−RC)>0V_B - V_A = I_g(2R - R_C) > 0. (B) true, (A) false.
  4. (C) all in parallel: common voltage IgRCI_gR_C; total current IC=2Ig+2IgRCRI_C = 2I_g + 2\dfrac{I_gR_C}{R}.
  5. (D) galvanometers in series (2RC2R_C) across R/2R/2: voltage 2IgRC2I_gR_C, total ID=Ig+2IgRCR/2=Ig+4IgRCRI_D = I_g + \dfrac{2I_gR_C}{R/2} = I_g + \dfrac{4I_gR_C}{R}. IC−ID=Ig(1−2RCR)>0I_C - I_D = I_g\left(1 - \dfrac{2R_C}{R}\right) > 0 since RC<R/2R_C < R/2. (C) true, (D) false.
AnswerAnswer: (B), (C)
Ask about this question
Q11

Physics, Question 11 (4 marks)

RC circuits (charging) · +4 / −2
In the circuit shown below, the key is pressed at time t=0t = 0. Which of the following statement(s) is(are) true? (The figure shows a diamond-shaped bridge with left, top, right and bottom nodes. Left to top: 40 μF capacitor; top to right: 25 kΩ resistor; left to bottom: 50 kΩ resistor; bottom to right: 20 μF capacitor. A voltmeter joins the top node (− terminal) to the bottom node (+ terminal). The left node goes through an ammeter A and the key to the + terminal of a 5 V cell, whose − terminal goes to the right node.)
  1. (A)The voltmeter displays −5-5 V as soon as the key is pressed, and displays +5+5 V after a long time
  2. (B)The voltmeter will display 0 V at time t=ln⁡2t = \ln 2 seconds
  3. (C)The current in the ammeter becomes 1/e1/e of the initial value after 1 second
  4. (D)The current in the ammeter becomes zero after a long time

Tests: Find node voltages and currents in parallel RC branches while the capacitors charge.

Show solution
  1. Two independent RC branches across 5 V: upper (40 μF then 25 kΩ), τ1=25×103×40×10−6=1\tau_1 = 25 \times 10^3 \times 40 \times 10^{-6} = 1 s; lower (50 kΩ then 20 μF), τ2=50×103×20×10−6=1\tau_2 = 50 \times 10^3 \times 20 \times 10^{-6} = 1 s. Take the right node at 0 V, the left at 5 V.
  2. Top node (between capacitor and resistor): uncharged capacitor at first, so Vtop(0)=5V_{top}(0) = 5; finally no current through 25 kΩ, so Vtop→0V_{top} \to 0: Vtop=5e−tV_{top} = 5e^{-t}.
  3. Bottom node: Vbot(0)=0V_{bot}(0) = 0 (capacitor uncharged), finally 5 V: Vbot=5(1−e−t)V_{bot} = 5(1 - e^{-t}).
  4. Voltmeter reads Vbot−Vtop=5−10e−tV_{bot} - V_{top} = 5 - 10e^{-t}: −5-5 V at t=0t = 0, +5+5 V after long. (A) true. Zero when e−t=1/2e^{-t} = 1/2, t=ln⁡2t = \ln 2 s. (B) true.
  5. Ammeter current = sum of both branch currents, each ∝e−t\propto e^{-t} (same τ=1\tau = 1 s): I=I0e−tI = I_0e^{-t}, so I0/eI_0/e at 1 s (C) true, and I→0I \to 0 as the capacitors charge (D) true.
AnswerAnswer: (A), (B), (C), (D)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Simple harmonic motion (spring-block, collisions) · +4 / −2
A block with mass MM is connected by a massless spring with stiffness constant kk to a rigid wall and moves without friction on a horizontal surface. The block oscillates with small amplitude AA about an equilibrium position x0x_0. Consider two cases: (i) when the block is at x0x_0; and (ii) when the block is at x=x0+Ax = x_0 + A. In both the cases, a particle with mass m (<M)m\ (< M) is softly placed on the block after which they stick to each other. Which of the following statement(s) is(are) true about the motion after the mass mm is placed on the mass MM?
  1. (A)The amplitude of oscillation in the first case changes by a factor of Mm+M\sqrt{\dfrac{M}{m + M}}, whereas in the second case it remains unchanged
  2. (B)The final time period of oscillation in both the cases is same
  3. (C)The total energy decreases in both the cases
  4. (D)The instantaneous speed at x0x_0 of the combined masses decreases in both the cases

Tests: Find how amplitude, period, energy and speed change when mass is added to an oscillating block.

Show solution
  1. Case (i), at x0x_0 the speed is AωA\omega, ω=k/M\omega = \sqrt{k/M}. Momentum is conserved: v′=MAωM+mv' = \dfrac{MA\omega}{M + m}. New ω′=k/(M+m)\omega' = \sqrt{k/(M + m)}, so A′=v′ω′=AMM+mA' = \dfrac{v'}{\omega'} = A\sqrt{\dfrac{M}{M + m}}.
  2. Case (ii), at the extreme the block is at rest; placing mm changes nothing about position or velocity, so A′=AA' = A. (A) true.
  3. Both cases end with mass M+mM + m on the same spring: T=2π(M+m)/kT = 2\pi\sqrt{(M + m)/k}. (B) true.
  4. (C): case (i) is a perfectly inelastic collision, energy falls; case (ii) has no relative motion, energy 12kA2\tfrac{1}{2}kA^2 is unchanged. False.
  5. (D): speed at x0x_0, case (i) MM+mAω<Aω\dfrac{M}{M + m}A\omega < A\omega; case (ii) Aω′<AωA\omega' < A\omega. Decreases in both. True.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Wave optics (Young's double slit) · +4 / −2
While conducting the Young's double slit experiment, a student replaced the two slits with a large opaque plate in the x-y plane containing two small holes that act as two coherent point sources (S1,S2S_1, S_2) emitting light of wavelength 600 nm. The student mistakenly placed the screen parallel to the x-z plane (for z>0z > 0) at a distance D=3D = 3 m from the mid-point of S1S2S_1S_2, as shown schematically in the figure. The distance between the sources d=0.6003d = 0.6003 mm. The origin O is at the intersection of the screen and the line joining S1S2S_1S_2. Which of the following is(are) true of the intensity pattern on the screen? (The figure shows S1S_1 and S2S_2 on the y-axis, a distance dd apart, lying in the opaque plate (x-y plane). The screen is perpendicular to the y-axis at distance DD, standing in the x-z plane above the plate (z>0z > 0), and O is where the y-axis meets it.)
  1. (A)Straight bright and dark bands parallel to the x-axis
  2. (B)The region very close to the point O will be dark
  3. (C)Hyperbolic bright and dark bands with foci symmetrically placed about O in the x-direction
  4. (D)Semi circular bright and dark bands centered at point O

Tests: Find the shape of interference fringes when the screen is perpendicular to the line of the two sources.

Show solution
  1. A point P on the screen at distance ρ\rho from O sees the sources along a line making angle θ\theta with the y-axis, cos⁡θ=DD2+ρ2\cos\theta = \dfrac{D}{\sqrt{D^2 + \rho^2}}. Path difference Δ=dcos⁡θ\Delta = d\cos\theta.
  2. Δ\Delta depends only on ρ\rho, so fringes are circles about O; only z>0z > 0 is screen, so they are semicircles centred at O. (D) true; (A) and (C) false.
  3. At O, Δ=d=0.6003 mm=600.3 μm\Delta = d = 0.6003\ \mathrm{mm} = 600.3\ \mu\mathrm{m}, and 600.30.6=1000.5\dfrac{600.3}{0.6} = 1000.5 wavelengths: a half-integer, so destructive interference.
  4. O and its immediate neighbourhood are dark. (B) true.

    Why: This is why d is given to four significant figures.

AnswerAnswer: (B), (D)
Ask about this question
Q14

Physics, Question 14 (4 marks)

Electromagnetic induction (motional emf) · +4 / −2
A rigid wire loop of square shape having side of length LL and resistance RR is moving along the x-axis with a constant velocity v0v_0 in the plane of the paper. At t=0t = 0, the right edge of the loop enters a region of length 3L3L where there is a uniform magnetic field B0B_0 into the plane of the paper, as shown in the figure. For sufficiently large v0v_0, the loop eventually crosses the region. Let xx be the location of the right edge of the loop. Let v(x)v(x), I(x)I(x) and F(x)F(x) represent the velocity of the loop, current in the loop, and force on the loop, respectively, as a function of xx. Counter-clockwise current is taken as positive. (The figure shows the field region from x=0x = 0 to x=3Lx = 3L and the loop arriving from the left.) Which of the following schematic plot(s) is(are) correct? (Ignore gravity) (Plots, each against xx from 0 to 4L4L: (A) vv falls linearly from v0v_0 over 00 to LL, stays constant from LL to 3L3L, then falls linearly again from 3L3L to 4L4L. (B) II is positive and falls linearly over 00 to LL, is zero from LL to 3L3L, then jumps to a negative value at 3L3L whose size falls linearly to zero at 4L4L. (C) like (B) but the current from 3L3L to 4L4L is positive and falling. (D) FF is negative over 00 to LL with its size falling, zero from LL to 3L3L, then positive and falling from 3L3L to 4L4L.)
  1. (A)v(x)v(x) plot as described in (A)
  2. (B)I(x)I(x) plot as described in (B)
  3. (C)I(x)I(x) plot as described in (C)
  4. (D)F(x)F(x) plot as described in (D)

Tests: Find how speed, current and force vary with position for a loop braked by induction.

Show solution
  1. While one edge cuts the field: emf =B0Lv= B_0Lv, I=B0LvRI = \dfrac{B_0Lv}{R}, retarding force F=−B02L2vRF = -\dfrac{B_0^2L^2v}{R}.
  2. mvdvdx=−B02L2Rv⇒dvdx=−B02L2mRm v\dfrac{dv}{dx} = -\dfrac{B_0^2L^2}{R}v \Rightarrow \dfrac{dv}{dx} = -\dfrac{B_0^2L^2}{mR}, a constant: vv falls linearly with xx while entering (0<x<L0 < x < L) and leaving (3L<x<4L3L < x < 4L), and stays constant while the loop is wholly inside (L<x<3LL < x < 3L, flux constant, no current). (A) true.
  3. Entering: inward flux grows, so the induced current makes an outward field: counter-clockwise, positive, ∝v\propto v, falling linearly. Leaving: inward flux falls, current clockwise, negative, its size falling linearly. (B) true, (C) false.
  4. The magnetic force always opposes the motion (Lenz's law), so F<0F < 0 while leaving too. (D) shows a positive force from 3L3L to 4L4L. False.
AnswerAnswer: (A), (B)
Ask about this question

Physics, Section 3: Two paragraphs, two questions each, only one option correct: +3 if only the correct option is darkened, 0 in all other cases (no negative marks)

Q15

Physics, Question 15 (3 marks)

Non-inertial frames (rotating frame) · +3
Paragraph: A frame of reference that is accelerated with respect to an inertial frame of reference is called a non-inertial frame of reference. A coordinate system fixed on a circular disc rotating about a fixed axis with a constant angular velocity ω\omega is an example of a non-inertial frame of reference. The relationship between the force F⃗rot\vec{F}_{rot} experienced by a particle of mass mm moving on the rotating disc and the force F⃗in\vec{F}_{in} experienced by the particle in an inertial frame of reference is F⃗rot=F⃗in+2m(v⃗rot×ω⃗)+m(ω⃗×r⃗)×ω⃗\vec{F}_{rot} = \vec{F}_{in} + 2m(\vec{v}_{rot} \times \vec{\omega}) + m(\vec{\omega} \times \vec{r}) \times \vec{\omega}, where v⃗rot\vec{v}_{rot} is the velocity of the particle in the rotating frame of reference and r⃗\vec{r} is the position vector of the particle with respect to the centre of the disc. Now consider a smooth slot along a diameter of a disc of radius RR rotating counter-clockwise with a constant angular speed ω\omega about its vertical axis through its center. We assign a coordinate system with the origin at the center of the disc, the x-axis along the slot, the y-axis perpendicular to the slot and the z-axis along the rotation axis (ω⃗=ωk^\vec{\omega} = \omega\hat{k}). A small block of mass mm is gently placed in the slot at r⃗=(R/2)i^\vec{r} = (R/2)\hat{i} at t=0t = 0 and is constrained to move only along the slot. (The figure shows a horizontal disc spinning counter-clockwise about its vertical central axis, a straight slot along a diameter, and the block in the slot at distance R/2R/2 from the centre.) Question: The distance r of the block at time t is
  1. (A)R4(eωt+e−ωt)\dfrac{R}{4}(e^{\omega t} + e^{-\omega t})
  2. (B)R2cos⁡ωt\dfrac{R}{2}\cos\omega t
  3. (C)R4(e2ωt+e−2ωt)\dfrac{R}{4}(e^{2\omega t} + e^{-2\omega t})
  4. (D)R2cos⁡2ωt\dfrac{R}{2}\cos 2\omega t

Tests: Write the equation of motion in a rotating frame and solve it for a bead in a radial slot.

Show solution
  1. Along the smooth slot (x-direction) the only force in the rotating frame is the centrifugal term m(ω⃗×r⃗)×ω⃗=mω2x i^m(\vec{\omega} \times \vec{r}) \times \vec{\omega} = m\omega^2 x\,\hat{i}; the Coriolis force is along j^\hat{j} and the slot wall takes it.
  2. x¨=ω2x\ddot{x} = \omega^2 x, so x=C1eωt+C2e−ωtx = C_1e^{\omega t} + C_2e^{-\omega t}.
  3. At t=0t = 0: x=R/2x = R/2 and x˙=0\dot{x} = 0 (placed gently), so C1=C2=R/4C_1 = C_2 = R/4.
  4. r=R4(eωt+e−ωt)=R2cosh⁡ωtr = \dfrac{R}{4}(e^{\omega t} + e^{-\omega t}) = \dfrac{R}{2}\cosh\omega t.
AnswerAnswer: (A) R4(eωt+e−ωt)\dfrac{R}{4}(e^{\omega t} + e^{-\omega t})
Ask about this question
Q16

Physics, Question 16 (3 marks)

Non-inertial frames (Coriolis force) · +3
Paragraph: A frame of reference that is accelerated with respect to an inertial frame of reference is called a non-inertial frame of reference. A coordinate system fixed on a circular disc rotating about a fixed axis with a constant angular velocity ω\omega is an example of a non-inertial frame of reference. The relationship between the force F⃗rot\vec{F}_{rot} experienced by a particle of mass mm moving on the rotating disc and the force F⃗in\vec{F}_{in} experienced by the particle in an inertial frame of reference is F⃗rot=F⃗in+2m(v⃗rot×ω⃗)+m(ω⃗×r⃗)×ω⃗\vec{F}_{rot} = \vec{F}_{in} + 2m(\vec{v}_{rot} \times \vec{\omega}) + m(\vec{\omega} \times \vec{r}) \times \vec{\omega}, where v⃗rot\vec{v}_{rot} is the velocity of the particle in the rotating frame of reference and r⃗\vec{r} is the position vector of the particle with respect to the centre of the disc. Now consider a smooth slot along a diameter of a disc of radius RR rotating counter-clockwise with a constant angular speed ω\omega about its vertical axis through its center. We assign a coordinate system with the origin at the center of the disc, the x-axis along the slot, the y-axis perpendicular to the slot and the z-axis along the rotation axis (ω⃗=ωk^\vec{\omega} = \omega\hat{k}). A small block of mass mm is gently placed in the slot at r⃗=(R/2)i^\vec{r} = (R/2)\hat{i} at t=0t = 0 and is constrained to move only along the slot. (The figure shows a horizontal disc spinning counter-clockwise about its vertical central axis, a straight slot along a diameter, and the block in the slot at distance R/2R/2 from the centre.) Question: The net reaction of the disc on the block is
  1. (A)12mω2R(e2ωt−e−2ωt)j^+mgk^\dfrac{1}{2}m\omega^2R(e^{2\omega t} - e^{-2\omega t})\hat{j} + mg\hat{k}
  2. (B)12mω2R(eωt−e−ωt)j^+mgk^\dfrac{1}{2}m\omega^2R(e^{\omega t} - e^{-\omega t})\hat{j} + mg\hat{k}
  3. (C)−mω2Rcos⁡ωt j^−mgk^-m\omega^2R\cos\omega t\,\hat{j} - mg\hat{k}
  4. (D)mω2Rsin⁡ωt j^−mgk^m\omega^2R\sin\omega t\,\hat{j} - mg\hat{k}

Tests: Find the constraint force that cancels the Coriolis force on a block moving in a rotating slot.

Show solution
  1. From Q15, x˙=Rω4(eωt−e−ωt)\dot{x} = \dfrac{R\omega}{4}(e^{\omega t} - e^{-\omega t}), so v⃗rot=x˙ i^\vec{v}_{rot} = \dot{x}\,\hat{i}.
  2. Coriolis force: 2m(v⃗rot×ω⃗)=2mx˙ω(i^×k^)=−2mωx˙ j^2m(\vec{v}_{rot} \times \vec{\omega}) = 2m\dot{x}\omega(\hat{i} \times \hat{k}) = -2m\omega\dot{x}\,\hat{j}.
  3. The block does not move along j^\hat{j}, so the slot wall pushes with +2mωx˙ j^=12mω2R(eωt−e−ωt)j^+2m\omega\dot{x}\,\hat{j} = \dfrac{1}{2}m\omega^2R(e^{\omega t} - e^{-\omega t})\hat{j}.
  4. Vertically the disc's normal force balances gravity: +mgk^+mg\hat{k}. The smooth slot gives no force along i^\hat{i}.
AnswerAnswer: (B) 12mω2R(eωt−e−ωt)j^+mgk^\dfrac{1}{2}m\omega^2R(e^{\omega t} - e^{-\omega t})\hat{j} + mg\hat{k}
Ask about this question
Q17

Physics, Question 17 (3 marks)

Electrostatics (charging by contact, parallel plates) · +3
Paragraph: Consider an evacuated cylindrical chamber of height hh having rigid conducting plates at the ends and an insulating curved surface as shown in the figure. A number of spherical balls made of a light weight and soft material and coated with a conducting material are placed on the bottom plate. The balls have a radius r≪hr \ll h. Now a high voltage source (HV) is connected across the conducting plates such that the bottom plate is at +V0+V_0 and the top plate at −V0-V_0. Due to their conducting surface, the balls will get charged, will become equipotential with the plate and are repelled by it. The balls will eventually collide with the top plate, where the coefficient of restitution can be taken to be zero due to the soft nature of the material of the balls. The electric field in the chamber can be considered to be that of a parallel plate capacitor. Assume that there are no collisions between the balls and the interaction between them is negligible. (Ignore gravity) (The figure shows the vertical cylinder with the balls resting on its bottom plate; the HV source has its + terminal wired to the bottom plate and its − terminal wired through an ammeter A to the top plate.) Question: Which one of the following statements is correct?
  1. (A)The balls will stick to the top plate and remain there
  2. (B)The balls will bounce back to the bottom plate carrying the same charge they went up with
  3. (C)The balls will bounce back to the bottom plate carrying the opposite charge they went up with
  4. (D)The balls will execute simple harmonic motion between the two plates

Tests: Follow charge transfer by contact and the motion of a charged conductor between capacitor plates.

Show solution
  1. On the bottom plate (at +V0+V_0) each ball takes positive charge and is pushed up by the field.
  2. It hits the top plate and stops (e=0e = 0). Touching the plate makes it equipotential with −V0-V_0, so it now carries negative charge.
  3. The negatively charged ball is pushed away from the top plate and accelerated back down, where the process repeats. So it returns with the opposite charge: (C).
  4. Not SHM (D): the force qEqE is constant in size between the plates, not proportional to displacement. The balls do not stay on the top plate (A), and they do not keep their charge (B).
AnswerAnswer: (C)
Ask about this question
Q18

Physics, Question 18 (3 marks)

Electrostatics and current (charge transport) · +3
Paragraph: Consider an evacuated cylindrical chamber of height hh having rigid conducting plates at the ends and an insulating curved surface as shown in the figure. A number of spherical balls made of a light weight and soft material and coated with a conducting material are placed on the bottom plate. The balls have a radius r≪hr \ll h. Now a high voltage source (HV) is connected across the conducting plates such that the bottom plate is at +V0+V_0 and the top plate at −V0-V_0. Due to their conducting surface, the balls will get charged, will become equipotential with the plate and are repelled by it. The balls will eventually collide with the top plate, where the coefficient of restitution can be taken to be zero due to the soft nature of the material of the balls. The electric field in the chamber can be considered to be that of a parallel plate capacitor. Assume that there are no collisions between the balls and the interaction between them is negligible. (Ignore gravity) (The figure shows the vertical cylinder with the balls resting on its bottom plate; the HV source has its + terminal wired to the bottom plate and its − terminal wired through an ammeter A to the top plate.) Question: The average current in the steady state registered by the ammeter in the circuit will be
  1. (A)zero
  2. (B)proportional to the potential V0V_0
  3. (C)proportional to V01/2V_0^{1/2}
  4. (D)proportional to V02V_0^2

Tests: Find how a charge-shuttle current depends on the applied voltage.

Show solution
  1. Charge on a ball: equipotential with a plate at ±V0\pm V_0, so q∝rV0q \propto rV_0, i.e. q∝V0q \propto V_0.
  2. Field between the plates E=2V0hE = \dfrac{2V_0}{h}, so the acceleration a=qEm∝V02a = \dfrac{qE}{m} \propto V_0^2.
  3. Each trip starts from rest (e=0e = 0): h=12at2⇒t=2h/a∝1V0h = \tfrac{1}{2}at^2 \Rightarrow t = \sqrt{2h/a} \propto \dfrac{1}{V_0}.
  4. Each trip moves charge qq effectively across the gap (and the return trip carries −q-q the other way, adding to the same current). Average current per ball ∼qt∝V0⋅V0=V02\sim \dfrac{q}{t} \propto V_0 \cdot V_0 = V_0^2.
AnswerAnswer: (D) proportional to V02V_0^2
Ask about this question

Chemistry, Section 1: 6 questions, only one option correct: +3 if only the bubble of the correct option is darkened, 0 if none is darkened, −1 in all other cases

Q19

Chemistry, Question 19 (3 marks)

Electrochemistry (Nernst equation) · +3 / −1
For the following electrochemical cell at 298 K, Pt(s) ∣ H2(g,1 bar) ∣ H+(aq,1 M) ∥ M4+(aq),M2+(aq) ∣ Pt(s)\mathrm{Pt(s)\,|\,H_2(g, 1\ bar)\,|\,H^+(aq, 1\ M)\,\|\,M^{4+}(aq), M^{2+}(aq)\,|\,Pt(s)}, Ecell=0.092E_{cell} = 0.092 V when [M2+(aq)][M4+(aq)]=10x\dfrac{[\mathrm{M^{2+}(aq)}]}{[\mathrm{M^{4+}(aq)}]} = 10^x. Given: EM4+/M2+∘=0.151E^\circ_{\mathrm{M^{4+}/M^{2+}}} = 0.151 V; 2.303RTF=0.0592.303\dfrac{RT}{F} = 0.059 V. The value of xx is
  1. (A)−2-2
  2. (B)−1-1
  3. (C)11
  4. (D)22

Tests: Apply the Nernst equation to a cell with a redox couple on one side.

Show solution
  1. Anode (left): H2→2H++2e−\mathrm{H_2 \rightarrow 2H^+ + 2e^-}. Cathode (right): M4++2e−→M2+\mathrm{M^{4+} + 2e^- \rightarrow M^{2+}}. Overall: H2+M4+→2H++M2+\mathrm{H_2 + M^{4+} \rightarrow 2H^+ + M^{2+}}, with n=2n = 2.
  2. Ecell∘=EM4+/M2+∘−EH+/H2∘=0.151−0=0.151E^\circ_{cell} = E^\circ_{\mathrm{M^{4+}/M^{2+}}} - E^\circ_{\mathrm{H^+/H_2}} = 0.151 - 0 = 0.151 V.
  3. Nernst: Ecell=Ecell∘−0.0592log⁡[H+]2[M2+]pH2[M4+]=0.151−0.0295 xE_{cell} = E^\circ_{cell} - \dfrac{0.059}{2}\log\dfrac{[\mathrm{H^+}]^2[\mathrm{M^{2+}}]}{p_{\mathrm{H_2}}[\mathrm{M^{4+}}]} = 0.151 - 0.0295\,x

    Why: H+ is 1 M and H2 is 1 bar, so only the M ratio survives in Q.

  4. 0.092=0.151−0.0295 x⇒0.0295 x=0.059⇒x=20.092 = 0.151 - 0.0295\,x \Rightarrow 0.0295\,x = 0.059 \Rightarrow x = 2.
AnswerAnswer: (D) x=2x = 2
Ask about this question
Q20

Chemistry, Question 20 (3 marks)

Surface chemistry (surfactants, surface tension) · +3 / −1
The qualitative sketches I, II and III given below show the variation of surface tension with molar concentration of three different aqueous solutions of KCl, CH3OH\mathrm{CH_3OH} and CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+} at room temperature. The correct assignment of the sketches is (The figure shows three plots of surface tension against concentration. I: surface tension falls gradually and smoothly, curving to level off. II: surface tension starts high and rises slightly, almost linearly. III: surface tension falls very steeply at low concentration, then becomes flat beyond a sharp break.)
  1. (A)I: KCl; II: CH3OH\mathrm{CH_3OH}; III: CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}
  2. (B)I: CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}; II: CH3OH\mathrm{CH_3OH}; III: KCl
  3. (C)I: KCl; II: CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}; III: CH3OH\mathrm{CH_3OH}
  4. (D)I: CH3OH\mathrm{CH_3OH}; II: KCl; III: CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}

Tests: Match electrolytes, small organics and surfactants to their surface tension curves.

Show solution
  1. Solutes that are pushed away from the surface raise surface tension; solutes that collect at the surface lower it.

    Why: Surface tension reflects what sits at the air–water interface.

  2. KCl: the ions are strongly hydrated and stay in the bulk, so surface tension rises slightly with concentration: sketch II.
  3. CH3OH\mathrm{CH_3OH}: a small organic molecule, weakly surface-active, lowers surface tension gradually and smoothly: sketch I.
  4. Sodium dodecyl sulphate, CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}, is a surfactant: it crowds the surface and drops surface tension sharply until the critical micelle concentration; beyond the CMC extra surfactant forms micelles, so the curve goes flat: sketch III.
  5. I: CH3OH, II: KCl, III: surfactant, which is option (D).
AnswerAnswer: (D) I: CH3OH\mathrm{CH_3OH}, II: KCl, III: CH3(CH2)11OSO3−Na+\mathrm{CH_3(CH_2)_{11}OSO_3^-Na^+}
Ask about this question
Q21

Chemistry, Question 21 (3 marks)

Qualitative analysis (silver and thiosulphate) · +3 / −1
In the following reaction sequence in aqueous solution, the species X, Y and Z, respectively, are (The scheme shows: S2O32−\mathrm{S_2O_3^{2-}} with Ag+\mathrm{Ag^+} gives X, a clear solution; X with more Ag+\mathrm{Ag^+} gives Y, a white precipitate; Y with time gives Z, a black precipitate.)
  1. (A)[Ag(S2O3)2]3−\mathrm{[Ag(S_2O_3)_2]^{3-}}, Ag2S2O3\mathrm{Ag_2S_2O_3}, Ag2S\mathrm{Ag_2S}
  2. (B)[Ag(S2O3)3]5−\mathrm{[Ag(S_2O_3)_3]^{5-}}, Ag2SO3\mathrm{Ag_2SO_3}, Ag2S\mathrm{Ag_2S}
  3. (C)[Ag(SO3)2]3−\mathrm{[Ag(SO_3)_2]^{3-}}, Ag2S2O3\mathrm{Ag_2S_2O_3}, Ag
  4. (D)[Ag(SO3)3]3−\mathrm{[Ag(SO_3)_3]^{3-}}, Ag2SO4\mathrm{Ag_2SO_4}, Ag

Tests: Know the silver nitrate test for thiosulphate: complex, white precipitate, black Ag2S.

Show solution
  1. With thiosulphate in excess, Ag+\mathrm{Ag^+} forms the soluble complex: Ag++2S2O32−→[Ag(S2O3)2]3−\mathrm{Ag^+ + 2S_2O_3^{2-} \rightarrow [Ag(S_2O_3)_2]^{3-}} (clear solution, X).

    Why: This is the same complex that dissolves AgBr in photographic fixing.

  2. Adding more Ag+\mathrm{Ag^+} uses up the free thiosulphate and the white silver thiosulphate precipitates: [Ag(S2O3)2]3−+3Ag+→2Ag2S2O3↓\mathrm{[Ag(S_2O_3)_2]^{3-} + 3Ag^+ \rightarrow 2Ag_2S_2O_3\downarrow} (Y).
  3. Ag2S2O3\mathrm{Ag_2S_2O_3} is unstable; on standing it hydrolyses (white, then yellow, brown, black): Ag2S2O3+H2O→Ag2S↓+H2SO4\mathrm{Ag_2S_2O_3 + H_2O \rightarrow Ag_2S\downarrow + H_2SO_4} (black Z).
  4. Options (C) and (D) use sulphite complexes, which do not come from thiosulphate here; (B) has the wrong complex and Ag2SO3\mathrm{Ag_2SO_3}. Only (A) fits.
AnswerAnswer: (A) [Ag(S2O3)2]3−\mathrm{[Ag(S_2O_3)_2]^{3-}}, Ag2S2O3\mathrm{Ag_2S_2O_3}, Ag2S\mathrm{Ag_2S}
Ask about this question
Q22

Chemistry, Question 22 (3 marks)

Coordination compounds (geometry) · +3 / −1
The geometries of the ammonia complexes of Ni2+\mathrm{Ni^{2+}}, Pt2+\mathrm{Pt^{2+}} and Zn2+\mathrm{Zn^{2+}}, respectively, are
  1. (A)octahedral, square planar and tetrahedral
  2. (B)square planar, octahedral and tetrahedral
  3. (C)tetrahedral, square planar and octahedral
  4. (D)octahedral, tetrahedral and square planar

Tests: Predict the geometry of ammine complexes from the metal ion's d-electron count and row.

Show solution
  1. Ni2+\mathrm{Ni^{2+}} (3d83d^8) with NH3\mathrm{NH_3} forms [Ni(NH3)6]2+\mathrm{[Ni(NH_3)_6]^{2+}}: sp3d2sp^3d^2, octahedral, paramagnetic with two unpaired electrons.

    Why: NH3 is not strong enough to force a 3d8 ion into square planar geometry.

  2. Pt2+\mathrm{Pt^{2+}} (5d85d^8) forms [Pt(NH3)4]2+\mathrm{[Pt(NH_3)_4]^{2+}}: dsp2dsp^2, square planar; 4d/5d d8d^8 ions have a large splitting and are square planar with almost any ligand.
  3. Zn2+\mathrm{Zn^{2+}} (3d103d^{10}) forms [Zn(NH3)4]2+\mathrm{[Zn(NH_3)_4]^{2+}}: sp3sp^3, tetrahedral (no crystal field preference for a d10d^{10} ion).
  4. Octahedral, square planar, tetrahedral: option (A).
AnswerAnswer: (A) octahedral, square planar and tetrahedral
Ask about this question
Q23

Chemistry, Question 23 (3 marks)

Carboxylic acids (acidity, ortho effect) · +3 / −1
The correct order of acidity for the following compounds is (The figure shows four benzoic acids: I 2,6-dihydroxybenzoic acid (OH on both carbons ortho to CO2H\mathrm{CO_2H}); II 2-hydroxybenzoic acid (salicylic acid); III 3-hydroxybenzoic acid; IV 4-hydroxybenzoic acid.)
  1. (A)I > II > III > IV
  2. (B)III > I > II > IV
  3. (C)III > IV > II > I
  4. (D)I > III > IV > II

Tests: Rank substituted benzoic acids using H-bonding (ortho effect), inductive and resonance effects.

Show solution
  1. Acidity is set by how well the carboxylate anion is stabilised.
  2. Ortho OH: the carboxylate is held by an intramolecular H-bond from the OH (COO−⋯H-O\mathrm{COO^- \cdots H\text{-}O}), which stabilises the anion strongly. Salicylic acid (II, pKa≈2.98\mathrm{p}K_a \approx 2.98) is much stronger than benzoic acid.

    Why: The H-bond acts on the anion more than on the neutral acid.

  3. Two ortho OH groups (I) can H-bond to both oxygens of the carboxylate: even more stabilisation, pKa≈1.3\mathrm{p}K_a \approx 1.3. So I > II.
  4. Meta OH (III): only the −I-I effect acts (resonance does not reach the carboxyl carbon), so it is slightly stronger than benzoic acid, pKa≈4.1\mathrm{p}K_a \approx 4.1.
  5. Para OH (IV): the +R+R effect of OH pushes electron density towards the carboxyl group and outweighs −I-I, so it is weaker, pKa≈4.6\mathrm{p}K_a \approx 4.6.
  6. Order: I > II > III > IV, option (A).
AnswerAnswer: (A) I > II > III > IV
Ask about this question
Q24

Chemistry, Question 24 (3 marks)

Aldehydes and ketones (aldol, Cannizzaro, acetals) · +3 / −1
The major product of the following reaction sequence is (The figure shows 2-methyl-1-phenylpropan-1-one (isobutyrophenone), C6H5COCH(CH3)2\mathrm{C_6H_5COCH(CH_3)_2}, treated with (i) HCHO (excess)/NaOH, heat; (ii) HCHO/H+\mathrm{H^+} (catalytic amount).)
  1. (A)5,5-dimethyl-4-phenyl-1,3-dioxane (six-membered ring O1–CH2–O3–CH(Ph)–C(CH3)2–CH2)
  2. (B)3-(hydroxymethoxy)-2,2-dimethyl-1-phenylpropan-1-one, C6H5COC(CH3)2CH2OCH2OH\mathrm{C_6H_5COC(CH_3)_2CH_2OCH_2OH}
  3. (C)5,5-dimethyl-4-phenyl-1,3-dioxan-4-ol (as in (A), with an OH also on the carbon bearing the phenyl)
  4. (D)3-hydroxy-1-[3-(hydroxymethyl)phenyl]-2,2-dimethylpropan-1-one, m-HOCH2C6H4COC(CH3)2CH2OH\mathrm{m\text{-}HOCH_2C_6H_4COC(CH_3)_2CH_2OH}

Tests: Follow a crossed aldol, a Cannizzaro-type reduction by HCHO and cyclic acetal formation.

Show solution
  1. The ketone has one α\alpha-H (on CH(CH3)2\mathrm{CH(CH_3)_2}). With HCHO/NaOH its enolate adds to formaldehyde (crossed aldol): C6H5COC(CH3)2CH2OH\mathrm{C_6H_5COC(CH_3)_2CH_2OH}. No α\alpha-H is left, so no dehydration.

    Why: HCHO has no alpha-H, so it can only be the acceptor.

  2. Excess HCHO with NaOH and heat then acts as a hydride donor (crossed Cannizzaro-type transfer): HCHO→HCOO−\mathrm{HCHO \rightarrow HCOO^-} while the C=O is reduced to CH(OH)\mathrm{CH(OH)}, giving the 1,3-diol C6H5CH(OH)C(CH3)2CH2OH\mathrm{C_6H_5CH(OH)C(CH_3)_2CH_2OH} (2,2-dimethyl-1-phenylpropane-1,3-diol).

    Why: With excess formaldehyde, it is formaldehyde that is oxidised to formate.

  3. Step (ii): HCHO with a trace of acid converts the 1,3-diol into its cyclic formal (acetal): the two OH oxygens are joined by one CH2\mathrm{CH_2}, closing a six-membered 1,3-dioxane ring.
  4. Ring: O1–C2H2–O3–C4H(Ph)–C5(CH3)2–C6H2. Product: 5,5-dimethyl-4-phenyl-1,3-dioxane, option (A).
  5. (B) is only a hemiformal of the aldol (not stable, not an acetal); (C) would need the ketone carbon unreduced inside a ring (a hemiketal); (D) puts a CH2OH on the benzene ring, which HCHO/NaOH cannot do.
AnswerAnswer: (A) 5,5-dimethyl-4-phenyl-1,3-dioxane
Ask about this question

Chemistry, Section 2: 8 questions, one or more options correct: +4 if only the bubble(s) of all the correct option(s) are darkened; partial +1 for each correct option darkened, provided no incorrect option is darkened; 0 if none is darkened; −2 in all other cases

Q25

Chemistry, Question 25 (4 marks)

Chemical bonding (molecular orbital theory) · +4 / −2
According to Molecular Orbital Theory,
  1. (A)C22−\mathrm{C_2^{2-}} is expected to be diamagnetic
  2. (B)O22+\mathrm{O_2^{2+}} is expected to have a longer bond length than O2\mathrm{O_2}
  3. (C)N2+\mathrm{N_2^+} and N2−\mathrm{N_2^-} have the same bond order
  4. (D)He2+\mathrm{He_2^+} has the same energy as two isolated He atoms

Tests: Use MO electron counts to get bond order, magnetism and bond length.

Show solution
  1. (A) True. C22−\mathrm{C_2^{2-}} has 14 electrons, like N2\mathrm{N_2}: σ1s2 σ∗1s2 σ2s2 σ∗2s2 π2px2=π2py2 σ2pz2\sigma 1s^2\,\sigma^*1s^2\,\sigma 2s^2\,\sigma^*2s^2\,\pi 2p_x^2 = \pi 2p_y^2\,\sigma 2p_z^2. All paired, so diamagnetic (bond order 3).
  2. (B) False. O22+\mathrm{O_2^{2+}} (14 electrons) has bond order 3; O2\mathrm{O_2} (16 electrons) has bond order 2. Higher bond order means a shorter bond.
  3. (C) True. N2+\mathrm{N_2^+} (13 e): one bonding electron removed, bond order 9−42=2.5\dfrac{9-4}{2} = 2.5. N2−\mathrm{N_2^-} (15 e): one electron in π∗\pi^*, bond order 10−52=2.5\dfrac{10-5}{2} = 2.5.

    Why: Counting 2s and 2p valence electrons only: bonding minus antibonding over 2.

  4. (D) False. He2+\mathrm{He_2^+} (σ1s2 σ∗1s1\sigma 1s^2\,\sigma^*1s^1) has bond order 0.5: it is a bound species, lower in energy than He + He+\mathrm{He^+} apart (and it is not even made of two neutral He atoms).
  5. Correct: (A) and (C).
AnswerAnswer: (A), (C)
Ask about this question
Q26

Chemistry, Question 26 (4 marks)

Solutions (Raoult's law, deviations) · +4 / −2
Mixture(s) showing positive deviation from Raoult's law at 35 ∘^\circC is(are)
  1. (A)carbon tetrachloride + methanol
  2. (B)carbon disulphide + acetone
  3. (C)benzene + toluene
  4. (D)phenol + aniline

Tests: Classify binary mixtures as ideal, positive-deviation or negative-deviation from intermolecular forces.

Show solution
  1. Positive deviation: A–B attractions are weaker than the average of A–A and B–B, so molecules escape more easily and the vapour pressure is above Raoult's value.
  2. (A) True. Methanol is H-bonded to itself; CCl4\mathrm{CCl_4} breaks up these H-bonds without offering any in return: positive deviation.
  3. (B) True. CS2\mathrm{CS_2} (non-polar) and acetone (polar) attract each other less than acetone–acetone dipole interactions: positive deviation (a classic example, with a maximum-pressure azeotrope).
  4. (C) False. Benzene and toluene are very similar; the solution is nearly ideal.
  5. (D) False. Phenol (acidic OH) and aniline (basic NH2) H-bond strongly with each other, stronger than in the pure liquids: negative deviation.
AnswerAnswer: (A), (B)
Ask about this question
Q27

Chemistry, Question 27 (4 marks)

Solid state (ccp / fcc) · +4 / −2
The CORRECT statement(s) for cubic close packed (ccp) three dimensional structure is(are)
  1. (A)The number of the nearest neighbours of an atom present in the topmost layer is 12
  2. (B)The efficiency of atom packing is 74%
  3. (C)The number of octahedral and tetrahedral voids per atom are 1 and 2, respectively
  4. (D)The unit cell edge length is 222\sqrt{2} times the radius of the atom

Tests: Recall coordination number, packing efficiency, voids and the a–r relation for ccp.

Show solution
  1. (A) False. An atom inside the solid has 12 nearest neighbours (6 in its layer, 3 above, 3 below). An atom in the topmost layer has no layer above it: 6 + 3 = 9.
  2. (B) True. fcc cell: 4 atoms, a=22 ra = 2\sqrt{2}\,r. Packing fraction =4⋅43πr3(22r)3=π32≈0.74= \dfrac{4 \cdot \frac{4}{3}\pi r^3}{(2\sqrt{2}r)^3} = \dfrac{\pi}{3\sqrt{2}} \approx 0.74.
  3. (C) True. Per fcc cell: 4 atoms, 4 octahedral voids (body centre + 12 edge centres × 1/4), 8 tetrahedral voids. Per atom: 1 octahedral, 2 tetrahedral.
  4. (D) True. Atoms touch along the face diagonal: 2 a=4r⇒a=22 r\sqrt{2}\,a = 4r \Rightarrow a = 2\sqrt{2}\,r.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q28

Chemistry, Question 28 (4 marks)

Metallurgy (extraction of copper) · +4 / −2
Extraction of copper from copper pyrite (CuFeS2\mathrm{CuFeS_2}) involves
  1. (A)crushing followed by concentration of the ore by froth-flotation
  2. (B)removal of iron as slag
  3. (C)self-reduction step to produce 'blister copper' following evolution of SO2\mathrm{SO_2}
  4. (D)refining of 'blister copper' by carbon reduction

Tests: Recall the steps of extracting copper from copper pyrites.

Show solution
  1. (A) True. Copper pyrite is a sulphide ore: it is crushed and concentrated by froth flotation (sulphide particles are wetted by the oil and float).
  2. (B) True. On roasting/smelting, iron forms FeO, which combines with silica flux: FeO+SiO2→FeSiO3\mathrm{FeO + SiO_2 \rightarrow FeSiO_3} (slag), leaving copper matte (Cu2S\mathrm{Cu_2S} with a little FeS).
  3. (C) True. In the Bessemer converter part of Cu2S\mathrm{Cu_2S} is oxidised to Cu2O\mathrm{Cu_2O}, which reacts with the remaining Cu2S\mathrm{Cu_2S}: 2Cu2O+Cu2S→6Cu+SO2\mathrm{2Cu_2O + Cu_2S \rightarrow 6Cu + SO_2}. This is self (auto)-reduction; escaping SO2\mathrm{SO_2} blisters the copper.
  4. (D) False. Blister copper is refined by poling and then electrolytic refining, not by reduction with carbon.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q29

Chemistry, Question 29 (4 marks)

p-Block elements (oxides of nitrogen) · +4 / −2
The nitrogen containing compound produced in the reaction of HNO3\mathrm{HNO_3} with P4O10\mathrm{P_4O_{10}}
  1. (A)can also be prepared by reaction of P4\mathrm{P_4} and HNO3\mathrm{HNO_3}
  2. (B)is diamagnetic
  3. (C)contains one N-N bond
  4. (D)reacts with Na metal producing a brown gas

Tests: Identify N2O5 from dehydration of nitric acid and recall its structure and reactions.

Show solution
  1. P4O10\mathrm{P_4O_{10}} is a strong dehydrating agent: 4HNO3+P4O10→2N2O5+4HPO3\mathrm{4HNO_3 + P_4O_{10} \rightarrow 2N_2O_5 + 4HPO_3}. The nitrogen compound is N2O5\mathrm{N_2O_5}, the anhydride of nitric acid.
  2. (A) False. P4\mathrm{P_4} with conc. HNO3\mathrm{HNO_3} is oxidised to H3PO4\mathrm{H_3PO_4} and nitric acid is reduced to NO2\mathrm{NO_2}: P4+20HNO3→4H3PO4+20NO2+4H2O\mathrm{P_4 + 20HNO_3 \rightarrow 4H_3PO_4 + 20NO_2 + 4H_2O}. No N2O5\mathrm{N_2O_5}.
  3. (B) True. N2O5\mathrm{N_2O_5} (O2N-O-NO2\mathrm{O_2N\text{-}O\text{-}NO_2}) has an even number of electrons, all paired: diamagnetic.
  4. (C) False. The two N atoms are joined through an oxygen bridge, N–O–N; there is no N–N bond.
  5. (D) True. Na+N2O5→NaNO3+NO2\mathrm{Na + N_2O_5 \rightarrow NaNO_3 + NO_2}: brown NO2\mathrm{NO_2} gas is given off.
AnswerAnswer: (B), (D)
Ask about this question
Q30

Chemistry, Question 30 (4 marks)

Biomolecules (carbohydrates) · +4 / −2
For 'invert sugar', the correct statement(s) is(are) (Given: specific rotations of (+)-sucrose, (+)-maltose, L-(−)-glucose and L-(+)-fructose in aqueous solution are +66∘+66^\circ, +140∘+140^\circ, −52∘-52^\circ and +92∘+92^\circ, respectively)
  1. (A)'invert sugar' is prepared by acid catalyzed hydrolysis of maltose
  2. (B)'invert sugar' is an equimolar mixture of D-(+)-glucose and D-(−)-fructose
  3. (C)specific rotation of 'invert sugar' is −20∘-20^\circ
  4. (D)on reaction with Br2\mathrm{Br_2} water, 'invert sugar' forms saccharic acid as one of the products

Tests: Know what invert sugar is, compute its specific rotation and its reaction with bromine water.

Show solution
  1. (A) False. Invert sugar comes from acid (or invertase) hydrolysis of sucrose; maltose gives only glucose.
  2. (B) True. Sucrose + water gives one glucose and one fructose: an equimolar mixture of D-(+)-glucose and D-(−)-fructose.
  3. (C) True. The data are for the L sugars; enantiomers have equal and opposite rotations, so D-glucose is +52∘+52^\circ and D-fructose is −92∘-92^\circ. For a 1 : 1 mixture: 52+(−92)2=−20∘\dfrac{52 + (-92)}{2} = -20^\circ.

    Why: The sign flips from + (sucrose) to −: that is why it is called inversion.

  4. (D) False. Bromine water is a mild oxidant: it oxidises glucose's CHO to COOH, giving gluconic acid, and does not touch fructose. Saccharic (glucaric) acid needs HNO3\mathrm{HNO_3}.
AnswerAnswer: (B), (C)
Ask about this question
Q31

Chemistry, Question 31 (4 marks)

Reduction (chemoselective reducing agents) · +4 / −2
Reagent(s) which can be used to bring about the following transformation is(are) (The figure shows 5-tert-butoxy-4-(3-formyloxiran-2-yl)-5-oxopentanoic acid, HOOC-CH2CH2-CH(CO2C(CH3)3)-(epoxide CH-CH)-CHO\mathrm{HOOC\text{-}CH_2CH_2\text{-}CH(CO_2C(CH_3)_3)\text{-}(epoxide\ CH\text{-}CH)\text{-}CHO}: a chain carrying a free COOH at one end, a tert-butyl ester on the CH next to an epoxide (oxirane) ring, and a CHO on the far epoxide carbon. It is converted into the same compound with the CHO changed to CH2OH\mathrm{CH_2OH}; the COOH, the ester and the epoxide are unchanged.)
  1. (A)LiAlH4\mathrm{LiAlH_4} in (C2H5)2O\mathrm{(C_2H_5)_2O}
  2. (B)BH3\mathrm{BH_3} in THF
  3. (C)NaBH4\mathrm{NaBH_4} in C2H5OH\mathrm{C_2H_5OH}
  4. (D)Raney Ni/H2\mathrm{H_2} in THF

Tests: Choose reducing agents that reduce an aldehyde selectively in a polyfunctional molecule.

Show solution
  1. Only the aldehyde may be reduced; the carboxylic acid, the tert-butyl ester and the epoxide must survive.
  2. (A) False. LiAlH4\mathrm{LiAlH_4} is too strong: it also reduces COOH and the ester to CH2OH\mathrm{CH_2OH} and opens the epoxide.
  3. (B) False. BH3\mathrm{BH_3} reduces carboxylic acids very fast (faster than most other groups), so the COOH would become CH2OH\mathrm{CH_2OH}.

    Why: Borane is electrophilic and attacks the electron-rich acid first.

  4. (C) True. NaBH4\mathrm{NaBH_4} is mild: it reduces aldehydes (and ketones) but not acids, esters or epoxides under these conditions.
  5. (D) True. Raney Ni/H2\mathrm{H_2} in THF hydrogenates the C=O of the aldehyde to the primary alcohol under mild conditions; acids and esters are not hydrogenated, and the key treats the epoxide as untouched.
AnswerAnswer: (C), (D)
Ask about this question
Q32

Chemistry, Question 32 (4 marks)

Aromatic compounds (Friedel–Crafts alkylation) · +4 / −2
Among the following, reaction(s) which gives(give) tert-butyl benzene as the major product is(are) (The figure shows benzene treated with: (A) tert-butyl bromide, (CH3)3CBr\mathrm{(CH_3)_3CBr}, and NaOC2H5\mathrm{NaOC_2H_5}; (B) isobutyl chloride, (CH3)2CHCH2Cl\mathrm{(CH_3)_2CHCH_2Cl}, and AlCl3\mathrm{AlCl_3}; (C) isobutylene (2-methylpropene), (CH3)2C=CH2\mathrm{(CH_3)_2C{=}CH_2}, and H2SO4\mathrm{H_2SO_4}; (D) isobutyl alcohol, (CH3)2CHCH2OH\mathrm{(CH_3)_2CHCH_2OH}, and BF3⋅OEt2\mathrm{BF_3\cdot OEt_2}.)
  1. (A)benzene + (CH3)3CBr\mathrm{(CH_3)_3CBr}, NaOC2H5\mathrm{NaOC_2H_5}
  2. (B)benzene + (CH3)2CHCH2Cl\mathrm{(CH_3)_2CHCH_2Cl}, AlCl3\mathrm{AlCl_3}
  3. (C)benzene + (CH3)2C=CH2\mathrm{(CH_3)_2C{=}CH_2}, H2SO4\mathrm{H_2SO_4}
  4. (D)benzene + (CH3)2CHCH2OH\mathrm{(CH_3)_2CHCH_2OH}, BF3⋅OEt2\mathrm{BF_3\cdot OEt_2}

Tests: Recognise Friedel–Crafts alkylation routes and carbocation rearrangement.

Show solution
  1. Each successful route must make the tert-butyl cation (CH3)3C+\mathrm{(CH_3)_3C^+}, which attacks benzene.
  2. (A) False. No Lewis acid, so no carbocation is formed for benzene to attack; ethoxide is a strong base and simply eliminates HBr from (CH3)3CBr\mathrm{(CH_3)_3CBr} to give isobutylene.
  3. (B) True. AlCl3\mathrm{AlCl_3} pulls off chloride; the incipient primary isobutyl cation undergoes a 1,2-hydride shift to (CH3)3C+\mathrm{(CH_3)_3C^+}, giving tert-butylbenzene.

    Why: Primary to tertiary carbocation is a large gain in stability.

  4. (C) True. H2SO4\mathrm{H_2SO_4} protonates isobutylene on the terminal CH2\mathrm{CH_2} (Markovnikov), giving (CH3)3C+\mathrm{(CH_3)_3C^+} directly.
  5. (D) True. BF3\mathrm{BF_3} makes the OH a leaving group; loss of it with a hydride shift again gives (CH3)3C+\mathrm{(CH_3)_3C^+} and tert-butylbenzene.
AnswerAnswer: (B), (C), (D)
Ask about this question

Chemistry, Section 3: 2 paragraphs, 2 questions on each, only one option correct: +3 if only the bubble of the correct option is darkened, 0 in all other cases

Q33

Chemistry, Question 33 (3 marks)

Chemical equilibrium (Kp, degree of dissociation) · +3
Paragraph: Thermal decomposition of gaseous X2\mathrm{X_2} to gaseous X at 298 K takes place according to the following equation: X2(g)⇌2X(g)\mathrm{X_2(g) \rightleftharpoons 2X(g)}. The standard reaction Gibbs energy, ΔrG∘\Delta_r G^\circ, of this reaction is positive. At the start of the reaction, there is one mole of X2\mathrm{X_2} and no X. As the reaction proceeds, the number of moles of X formed is given by β\beta. Thus, βequilibrium\beta_{\text{equilibrium}} is the number of moles of X formed at equilibrium. The reaction is carried out at a constant total pressure of 2 bar. Consider the gases to behave ideally. (Given: R=0.083 L bar K−1 mol−1R = 0.083\ \mathrm{L\ bar\ K^{-1}\ mol^{-1}}) Question: The equilibrium constant KPK_P for this reaction at 298 K, in terms of βequilibrium\beta_{\text{equilibrium}}, is
  1. (A)8βequilibrium22−βequilibrium\dfrac{8\beta^2_{\text{equilibrium}}}{2 - \beta_{\text{equilibrium}}}
  2. (B)8βequilibrium24−βequilibrium2\dfrac{8\beta^2_{\text{equilibrium}}}{4 - \beta^2_{\text{equilibrium}}}
  3. (C)4βequilibrium22−βequilibrium\dfrac{4\beta^2_{\text{equilibrium}}}{2 - \beta_{\text{equilibrium}}}
  4. (D)4βequilibrium24−βequilibrium2\dfrac{4\beta^2_{\text{equilibrium}}}{4 - \beta^2_{\text{equilibrium}}}

Tests: Express Kp through the extent of dissociation at constant total pressure.

Show solution
  1. Write β\beta for βequilibrium\beta_{\text{equilibrium}}. Forming β\beta mol X uses β/2\beta/2 mol X2\mathrm{X_2}: nX2=1−β2n_{\mathrm{X_2}} = 1 - \dfrac{\beta}{2}, nX=βn_{\mathrm{X}} = \beta, total n=1+β2n = 1 + \dfrac{\beta}{2}.
  2. Partial pressures at P=2P = 2 bar: pX=β1+β/2Pp_{\mathrm{X}} = \dfrac{\beta}{1 + \beta/2}P, pX2=1−β/21+β/2Pp_{\mathrm{X_2}} = \dfrac{1 - \beta/2}{1 + \beta/2}P.
  3. KP=pX2pX2=β2P(1+β/2)(1−β/2)=β2P1−β2/4=4β2P4−β2K_P = \dfrac{p_{\mathrm{X}}^2}{p_{\mathrm{X_2}}} = \dfrac{\beta^2 P}{(1 + \beta/2)(1 - \beta/2)} = \dfrac{\beta^2 P}{1 - \beta^2/4} = \dfrac{4\beta^2 P}{4 - \beta^2}.
  4. With P=2P = 2 bar: KP=8β24−β2K_P = \dfrac{8\beta^2}{4 - \beta^2}, option (B).
AnswerAnswer: (B) KP=8βequilibrium24−βequilibrium2K_P = \dfrac{8\beta^2_{\text{equilibrium}}}{4 - \beta^2_{\text{equilibrium}}}
Ask about this question
Q34

Chemistry, Question 34 (3 marks)

Chemical equilibrium (Gibbs energy, Le Chatelier) · +3
Paragraph: Thermal decomposition of gaseous X2\mathrm{X_2} to gaseous X at 298 K takes place according to the following equation: X2(g)⇌2X(g)\mathrm{X_2(g) \rightleftharpoons 2X(g)}. The standard reaction Gibbs energy, ΔrG∘\Delta_r G^\circ, of this reaction is positive. At the start of the reaction, there is one mole of X2\mathrm{X_2} and no X. As the reaction proceeds, the number of moles of X formed is given by β\beta. Thus, βequilibrium\beta_{\text{equilibrium}} is the number of moles of X formed at equilibrium. The reaction is carried out at a constant total pressure of 2 bar. Consider the gases to behave ideally. (Given: R=0.083 L bar K−1 mol−1R = 0.083\ \mathrm{L\ bar\ K^{-1}\ mol^{-1}}) Question: The INCORRECT statement among the following, for this reaction, is
  1. (A)Decrease in the total pressure will result in formation of more moles of gaseous X
  2. (B)At the start of the reaction, dissociation of gaseous X2\mathrm{X_2} takes place spontaneously
  3. (C)βequilibrium=0.7\beta_{\text{equilibrium}} = 0.7
  4. (D)KC<1K_C < 1

Tests: Connect the sign of ΔG° to K, and use Q and Le Chatelier to judge the direction of reaction.

Show solution
  1. ΔrG∘=−RTln⁡KP>0\Delta_r G^\circ = -RT\ln K_P > 0, so KP<1K_P < 1.
  2. (C) is incorrect. With β=0.7\beta = 0.7: KP=8(0.49)4−0.49=3.923.51≈1.12>1K_P = \dfrac{8(0.49)}{4 - 0.49} = \dfrac{3.92}{3.51} \approx 1.12 > 1, which contradicts KP<1K_P < 1. (Since KPK_P rises with β\beta, KP<1K_P < 1 needs 8β2<4−β28\beta^2 < 4 - \beta^2, i.e. β<2/3≈0.67\beta < 2/3 \approx 0.67.)
  3. (A) correct. The forward reaction increases the number of gas moles (1 to 2); lowering the pressure shifts it forward (Le Chatelier), forming more X.
  4. (B) correct. At the start there is no X, so Q=0Q = 0 and ΔrG=ΔrG∘+RTln⁡Q→−∞\Delta_r G = \Delta_r G^\circ + RT\ln Q \rightarrow -\infty: dissociation starts spontaneously even though ΔrG∘>0\Delta_r G^\circ > 0.

    Why: Spontaneity depends on Q, not on the standard Gibbs energy alone.

  5. (D) correct. KP=KC(RT)ΔnK_P = K_C(RT)^{\Delta n} with Δn=1\Delta n = 1: KC=KPRT=KP0.083×298≈KP24.7K_C = \dfrac{K_P}{RT} = \dfrac{K_P}{0.083 \times 298} \approx \dfrac{K_P}{24.7}, and KP<1K_P < 1, so KC<1K_C < 1.
AnswerAnswer: (C) βequilibrium=0.7\beta_{\text{equilibrium}} = 0.7 is incorrect
Ask about this question
Q35

Chemistry, Question 35 (3 marks)

Amines and amides (Hofmann bromamide reaction) · +3
Paragraph: Treatment of compound O with KMnO4/H+\mathrm{KMnO_4/H^+} gave P, which on heating with ammonia gave Q. The compound Q on treatment with Br2/NaOH\mathrm{Br_2/NaOH} produced R. On strong heating, Q gave S, which on further treatment with ethyl 2-bromopropanoate in the presence of KOH followed by acidification, gave a compound T. (The figure shows O: a benzene ring carrying two n-propyl groups on adjacent carbons, i.e. 1,2-dipropylbenzene, o-C6H4(CH2CH2CH3)2\mathrm{o\text{-}C_6H_4(CH_2CH_2CH_3)_2}.) Question: The compound R is
  1. (A)benzene-1,2-diamine (o-phenylenediamine), o-C6H4(NH2)2\mathrm{o\text{-}C_6H_4(NH_2)_2}
  2. (B)phthaloyl dibromide, o-C6H4(COBr)2\mathrm{o\text{-}C_6H_4(COBr)_2}
  3. (C)N,N'-dibromophthalamide, o-C6H4(CONHBr)2\mathrm{o\text{-}C_6H_4(CONHBr)_2}
  4. (D)N-bromophthalimide

Tests: Follow side-chain oxidation, amide formation and Hofmann degradation.

Show solution
  1. KMnO4/H+\mathrm{KMnO_4/H^+} oxidises every alkyl side chain on a benzene ring (with a benzylic H) down to COOH: O (1,2-dipropylbenzene) gives P = phthalic acid, o-C6H4(COOH)2\mathrm{o\text{-}C_6H_4(COOH)_2}.
  2. Heating with ammonia: ammonium phthalate loses water to give Q = phthalamide, o-C6H4(CONH2)2\mathrm{o\text{-}C_6H_4(CONH_2)_2}.
  3. Br2/NaOH\mathrm{Br_2/NaOH} is the Hofmann bromamide reaction: each CONH2\mathrm{CONH_2} becomes NH2\mathrm{NH_2} with loss of one carbon (as carbonate), via N-bromoamide and isocyanate.
  4. Both amide groups react, so R = benzene-1,2-diamine, o-C6H4(NH2)2\mathrm{o\text{-}C_6H_4(NH_2)_2}: option (A).

    Why: The N-bromoamide (C) is only an intermediate on the way.

AnswerAnswer: (A) o-phenylenediamine (benzene-1,2-diamine)
Ask about this question
Q36

Chemistry, Question 36 (3 marks)

Amines (Gabriel phthalimide synthesis) · +3
Paragraph: Treatment of compound O with KMnO4/H+\mathrm{KMnO_4/H^+} gave P, which on heating with ammonia gave Q. The compound Q on treatment with Br2/NaOH\mathrm{Br_2/NaOH} produced R. On strong heating, Q gave S, which on further treatment with ethyl 2-bromopropanoate in the presence of KOH followed by acidification, gave a compound T. (The figure shows O: a benzene ring carrying two n-propyl groups on adjacent carbons, i.e. 1,2-dipropylbenzene, o-C6H4(CH2CH2CH3)2\mathrm{o\text{-}C_6H_4(CH_2CH_2CH_3)_2}.) Question: The compound T is
  1. (A)glycine
  2. (B)alanine
  3. (C)valine
  4. (D)serine

Tests: Use the Gabriel synthesis with an alpha-bromo ester to make an amino acid.

Show solution
  1. From the paragraph: Q is phthalamide, o-C6H4(CONH2)2\mathrm{o\text{-}C_6H_4(CONH_2)_2}. Strong heating drives out NH3\mathrm{NH_3} and closes the ring: S = phthalimide.
  2. Gabriel synthesis: KOH removes the acidic N–H of phthalimide; the phthalimide anion does an SN2S_N2 on ethyl 2-bromopropanoate, CH3CHBrCOOC2H5\mathrm{CH_3CHBrCOOC_2H_5}, giving N-substituted phthalimide PhthN-CH(CH3)COOC2H5\mathrm{PhthN\text{-}CH(CH_3)COOC_2H_5}.
  3. Hydrolysis and acidification free the amine and the acid: H2N-CH(CH3)-COOH\mathrm{H_2N\text{-}CH(CH_3)\text{-}COOH} (with phthalic acid as by-product).
  4. CH3CH(NH2)COOH\mathrm{CH_3CH(NH_2)COOH} is 2-aminopropanoic acid, alanine: option (B).
AnswerAnswer: (B) alanine
Ask about this question

Mathematics, Section 1: 6 questions, only one option correct: +3 if only the bubble of the correct option is darkened, 0 if none is darkened, −1 in all other cases

Q37

Mathematics, Question 37 (3 marks)

Matrices · +3 / −1
Let P=[1004101641]P = \begin{bmatrix} 1 & 0 & 0 \\ 4 & 1 & 0 \\ 16 & 4 & 1 \end{bmatrix} and II be the identity matrix of order 3. If Q=[qij]Q = [q_{ij}] is a matrix such that P50−Q=IP^{50} - Q = I, then q31+q32q21\dfrac{q_{31} + q_{32}}{q_{21}} equals
  1. (A)52
  2. (B)103
  3. (C)201
  4. (D)205

Tests: Raise a matrix to a high power by splitting it into I plus a nilpotent matrix.

Show solution
  1. Write P=I+NP = I + N with N=[0004001640]N = \begin{bmatrix} 0 & 0 & 0 \\ 4 & 0 & 0 \\ 16 & 4 & 0 \end{bmatrix}.

    Why: A strictly lower-triangular N is nilpotent, so the binomial expansion stops early.

  2. N2=[0000001600]N^2 = \begin{bmatrix} 0 & 0 & 0 \\ 0 & 0 & 0 \\ 16 & 0 & 0 \end{bmatrix} and N3=ON^3 = O.
  3. Since II and NN commute, P50=I+50N+(502)N2=I+50N+1225N2P^{50} = I + 50N + \dbinom{50}{2}N^2 = I + 50N + 1225N^2.
  4. Q=P50−I=50N+1225N2Q = P^{50} - I = 50N + 1225N^2, so q21=50×4=200q_{21} = 50 \times 4 = 200, q32=50×4=200q_{32} = 50 \times 4 = 200, q31=50×16+1225×16=20400q_{31} = 50 \times 16 + 1225 \times 16 = 20400.
  5. q31+q32q21=20400+200200=103\dfrac{q_{31} + q_{32}}{q_{21}} = \dfrac{20400 + 200}{200} = 103.
AnswerAnswer: (B) 103
Ask about this question
Q38

Mathematics, Question 38 (3 marks)

Sequences and series (AP and GP) · +3 / −1
Let bi>1b_i > 1 for i=1,2,…,101i = 1, 2, \ldots, 101. Suppose log⁡eb1,log⁡eb2,…,log⁡eb101\log_e b_1, \log_e b_2, \ldots, \log_e b_{101} are in Arithmetic Progression (A.P.) with the common difference log⁡e2\log_e 2. Suppose a1,a2,…,a101a_1, a_2, \ldots, a_{101} are in A.P. such that a1=b1a_1 = b_1 and a51=b51a_{51} = b_{51}. If t=b1+b2+⋯+b51t = b_1 + b_2 + \cdots + b_{51} and s=a1+a2+⋯+a51s = a_1 + a_2 + \cdots + a_{51}, then
  1. (A)s>ts > t and a101>b101a_{101} > b_{101}
  2. (B)s>ts > t and a101<b101a_{101} < b_{101}
  3. (C)s<ts < t and a101>b101a_{101} > b_{101}
  4. (D)s<ts < t and a101<b101a_{101} < b_{101}

Tests: Compare an A.P. and a G.P. that share their first and 51st terms.

Show solution
  1. The logs are in A.P. with difference log⁡e2\log_e 2, so the bib_i are in G.P. with ratio 2: bi=2i−1b1b_i = 2^{i-1}b_1.
  2. t=b1(1+2+⋯+250)=b1(251−1)t = b_1(1 + 2 + \cdots + 2^{50}) = b_1(2^{51} - 1).
  3. s=512(a1+a51)=512b1(1+250)s = \dfrac{51}{2}(a_1 + a_{51}) = \dfrac{51}{2}b_1(1 + 2^{50}).
  4. s−t=b12[51+51⋅250−252+2]=b12[53+47⋅250]>0s - t = \dfrac{b_1}{2}\left[51 + 51 \cdot 2^{50} - 2^{52} + 2\right] = \dfrac{b_1}{2}\left[53 + 47 \cdot 2^{50}\right] > 0, so s>ts > t.

    Why: Between two equal end terms an A.P. lies above a G.P. (the G.P. is convex).

  5. Common difference of the A.P.: d=a51−a150=b1(250−1)50d = \dfrac{a_{51} - a_1}{50} = \dfrac{b_1(2^{50} - 1)}{50}, so a101=a1+100d=b1(251−1)a_{101} = a_1 + 100d = b_1(2^{51} - 1).
  6. b101=2100b1b_{101} = 2^{100}b_1, which is far bigger than (251−1)b1(2^{51} - 1)b_1. So a101<b101a_{101} < b_{101}.
AnswerAnswer: (B) s>ts > t and a101<b101a_{101} < b_{101}
Ask about this question
Q39

Mathematics, Question 39 (3 marks)

Trigonometric series (telescoping) · +3 / −1
The value of ∑k=1131sin⁡(π4+(k−1)π6)sin⁡(π4+kπ6)\displaystyle\sum_{k=1}^{13} \dfrac{1}{\sin\left(\dfrac{\pi}{4} + \dfrac{(k-1)\pi}{6}\right)\sin\left(\dfrac{\pi}{4} + \dfrac{k\pi}{6}\right)} is equal to
  1. (A)3−33 - \sqrt{3}
  2. (B)2(3−3)2(3 - \sqrt{3})
  3. (C)2(3−1)2(\sqrt{3} - 1)
  4. (D)2(2+3)2(2 + \sqrt{3})

Tests: Telescope a sum of 1/(sin A sin B) with a constant angle gap using cot A − cot B.

Show solution
  1. For angles AA, BB with B−A=π6B - A = \dfrac{\pi}{6}: 1sin⁡Asin⁡B=sin⁡(B−A)sin⁡(B−A)sin⁡Asin⁡B=cot⁡A−cot⁡Bsin⁡(π/6)=2(cot⁡A−cot⁡B)\dfrac{1}{\sin A \sin B} = \dfrac{\sin(B - A)}{\sin(B - A)\sin A \sin B} = \dfrac{\cot A - \cot B}{\sin(\pi/6)} = 2(\cot A - \cot B).

    Why: sin(B − A) = sin B cos A − cos B sin A; divide by sin A sin B.

  2. With Ak=π4+(k−1)π6A_k = \dfrac{\pi}{4} + \dfrac{(k-1)\pi}{6}, the sum telescopes: 2[cot⁡π4−cot⁡(π4+13π6)]2\left[\cot\dfrac{\pi}{4} - \cot\left(\dfrac{\pi}{4} + \dfrac{13\pi}{6}\right)\right].
  3. cot⁡\cot has period π\pi, so cot⁡(π4+13π6)=cot⁡(π4+π6)=cot⁡75∘=2−3\cot\left(\dfrac{\pi}{4} + \dfrac{13\pi}{6}\right) = \cot\left(\dfrac{\pi}{4} + \dfrac{\pi}{6}\right) = \cot 75^\circ = 2 - \sqrt{3}.
  4. Sum =2[1−(2−3)]=2(3−1)= 2\left[1 - (2 - \sqrt{3})\right] = 2(\sqrt{3} - 1).
AnswerAnswer: (C) 2(3−1)2(\sqrt{3} - 1)
Ask about this question
Q40

Mathematics, Question 40 (3 marks)

Definite integration (properties) · +3 / −1
The value of ∫−π/2π/2x2cos⁡x1+ex dx\displaystyle\int_{-\pi/2}^{\pi/2} \dfrac{x^2 \cos x}{1 + e^x}\,dx is equal to
  1. (A)π24−2\dfrac{\pi^2}{4} - 2
  2. (B)π24+2\dfrac{\pi^2}{4} + 2
  3. (C)π2−eπ/2\pi^2 - e^{\pi/2}
  4. (D)π2+eπ/2\pi^2 + e^{\pi/2}

Tests: Remove the 1/(1 + e^x) factor by adding the integral to its reflection x → −x.

Show solution
  1. Replace xx by −x-x: I=∫−π/2π/2x2cos⁡x1+e−x dx=∫−π/2π/2x2excos⁡x1+ex dxI = \displaystyle\int_{-\pi/2}^{\pi/2} \dfrac{x^2 \cos x}{1 + e^{-x}}\,dx = \int_{-\pi/2}^{\pi/2} \dfrac{x^2 e^x \cos x}{1 + e^x}\,dx.

    Why: The property of definite integrals over a symmetric interval.

  2. Add the two forms: 2I=∫−π/2π/2x2cos⁡x dx=2∫0π/2x2cos⁡x dx2I = \displaystyle\int_{-\pi/2}^{\pi/2} x^2 \cos x\,dx = 2\int_0^{\pi/2} x^2 \cos x\,dx, so I=∫0π/2x2cos⁡x dxI = \displaystyle\int_0^{\pi/2} x^2 \cos x\,dx.
  3. By parts twice: ∫x2cos⁡x dx=x2sin⁡x+2xcos⁡x−2sin⁡x\displaystyle\int x^2 \cos x\,dx = x^2 \sin x + 2x\cos x - 2\sin x.
  4. At π2\dfrac{\pi}{2}: π24+0−2\dfrac{\pi^2}{4} + 0 - 2; at 0: 0. So I=π24−2I = \dfrac{\pi^2}{4} - 2.
AnswerAnswer: (A) π24−2\dfrac{\pi^2}{4} - 2
Ask about this question
Q41

Mathematics, Question 41 (3 marks)

Area under curves · +3 / −1
Area of the region {(x,y)∈R2:y≥∣x+3∣, 5y≤x+9≤15}\left\{(x, y) \in \mathbb{R}^2 : y \ge \sqrt{|x + 3|},\ 5y \le x + 9 \le 15\right\} is equal to
  1. (A)16\dfrac{1}{6}
  2. (B)43\dfrac{4}{3}
  3. (C)32\dfrac{3}{2}
  4. (D)53\dfrac{5}{3}

Tests: Find the area between a line and a square-root curve with a modulus, splitting at the kink.

Show solution
  1. The region lies above the curve y=∣x+3∣y = \sqrt{|x + 3|}, below the line y=x+95y = \dfrac{x + 9}{5}, with x≤6x \le 6.
  2. Meeting points for x≥−3x \ge -3: 25(x+3)=(x+9)225(x + 3) = (x + 9)^2 gives x2−7x+6=0x^2 - 7x + 6 = 0, x=1x = 1 or 66. For x<−3x < -3: −25(x+3)=(x+9)2-25(x + 3) = (x + 9)^2 gives x2+43x+156=0x^2 + 43x + 156 = 0, x=−4x = -4 or −39-39.
  3. Test points: at x=0x = 0 the line (1.81.8) is above the curve (3≈1.73\sqrt{3} \approx 1.73); at x=2x = 2 the curve (5\sqrt{5}) is above the line (2.22.2); at x=−10x = -10 the curve is above the line. So the region is exactly −4≤x≤1-4 \le x \le 1.

    Why: Only between −4 and 1 is the line above the curve.

  4. Under the line: ∫−41x+95 dx=15[x22+9x]−41=15(192+28)=152\displaystyle\int_{-4}^{1} \dfrac{x + 9}{5}\,dx = \dfrac{1}{5}\left[\dfrac{x^2}{2} + 9x\right]_{-4}^{1} = \dfrac{1}{5}\left(\dfrac{19}{2} + 28\right) = \dfrac{15}{2}.
  5. Under the curve: ∫−4−3−x−3 dx+∫−31x+3 dx=23+23⋅8=6\displaystyle\int_{-4}^{-3} \sqrt{-x - 3}\,dx + \int_{-3}^{1} \sqrt{x + 3}\,dx = \dfrac{2}{3} + \dfrac{2}{3} \cdot 8 = 6.
  6. Area =152−6=32= \dfrac{15}{2} - 6 = \dfrac{3}{2}.
AnswerAnswer: (C) 32\dfrac{3}{2}
Ask about this question
Q42

Mathematics, Question 42 (3 marks)

3D geometry (planes and lines) · +3 / −1
Let PP be the image of the point (3,1,7)(3, 1, 7) with respect to the plane x−y+z=3x - y + z = 3. Then the equation of the plane passing through PP and containing the straight line x1=y2=z1\dfrac{x}{1} = \dfrac{y}{2} = \dfrac{z}{1} is
  1. (A)x+y−3z=0x + y - 3z = 0
  2. (B)3x+z=03x + z = 0
  3. (C)x−4y+7z=0x - 4y + 7z = 0
  4. (D)2x−y=02x - y = 0

Tests: Reflect a point in a plane, then find the plane through it containing a given line.

Show solution
  1. Image of (x0,y0,z0)(x_0, y_0, z_0) in x−y+z=3x - y + z = 3: (x0,y0,z0)−2(x0−y0+z0−3)3(1,−1,1)(x_0, y_0, z_0) - \dfrac{2(x_0 - y_0 + z_0 - 3)}{3}(1, -1, 1).
  2. Here x0−y0+z0−3=6x_0 - y_0 + z_0 - 3 = 6, so P=(3,1,7)−4(1,−1,1)=(−1,5,3)P = (3, 1, 7) - 4(1, -1, 1) = (-1, 5, 3).
  3. The line passes through the origin with direction (1,2,1)(1, 2, 1), so the plane passes through OO and contains the vectors (1,2,1)(1, 2, 1) and OP⃗=(−1,5,3)\vec{OP} = (-1, 5, 3).
  4. Normal =(1,2,1)×(−1,5,3)=(6−5, −1−3, 5+2)=(1,−4,7)= (1, 2, 1) \times (-1, 5, 3) = (6 - 5,\ -1 - 3,\ 5 + 2) = (1, -4, 7).
  5. Plane: x−4y+7z=0x - 4y + 7z = 0. Check PP: −1−20+21=0-1 - 20 + 21 = 0.
AnswerAnswer: (C) x−4y+7z=0x - 4y + 7z = 0
Ask about this question

Mathematics, Section 2: 8 questions, one or more options correct: +4 if only the bubbles of all the correct options are darkened; +1 for each correct option darkened, provided no incorrect option is darkened; 0 if none is darkened; −2 in all other cases

Q43

Mathematics, Question 43 (4 marks)

Limits as definite integrals · +4 / −2
Let f(x)=lim⁡n→∞(nn(x+n)(x+n2)⋯(x+nn)n! (x2+n2)(x2+n24)⋯(x2+n2n2))x/nf(x) = \displaystyle\lim_{n \to \infty} \left( \dfrac{n^n (x + n)\left(x + \dfrac{n}{2}\right) \cdots \left(x + \dfrac{n}{n}\right)}{n!\,(x^2 + n^2)\left(x^2 + \dfrac{n^2}{4}\right) \cdots \left(x^2 + \dfrac{n^2}{n^2}\right)} \right)^{x/n}, for all x>0x > 0. Then
  1. (A)f(12)≥f(1)f\left(\dfrac{1}{2}\right) \ge f(1)
  2. (B)f(13)≤f(23)f\left(\dfrac{1}{3}\right) \le f\left(\dfrac{2}{3}\right)
  3. (C)f′(2)≤0f'(2) \le 0
  4. (D)f′(3)f(3)≥f′(2)f(2)\dfrac{f'(3)}{f(3)} \ge \dfrac{f'(2)}{f(2)}

Tests: Turn a limit of a product into an integral via logs and a Riemann sum, then study monotonicity.

Show solution
  1. Factor each bracket: x+nr=nr(1+rxn)x + \dfrac{n}{r} = \dfrac{n}{r}\left(1 + \dfrac{rx}{n}\right) and x2+n2r2=n2r2(1+r2x2n2)x^2 + \dfrac{n^2}{r^2} = \dfrac{n^2}{r^2}\left(1 + \dfrac{r^2x^2}{n^2}\right). Since ∏r=1nnr=nnn!\prod_{r=1}^n \dfrac{n}{r} = \dfrac{n^n}{n!}, all the nnn^n and n!n! factors cancel.
  2. The bracket becomes ∏r=1n1+rx/n1+(rx/n)2\displaystyle\prod_{r=1}^n \dfrac{1 + rx/n}{1 + (rx/n)^2}, so ln⁡f(x)=lim⁡xn∑r=1nln⁡1+rx/n1+(rx/n)2=x∫01ln⁡1+xt1+x2t2 dt\ln f(x) = \lim \dfrac{x}{n}\sum_{r=1}^n \ln\dfrac{1 + rx/n}{1 + (rx/n)^2} = x\int_0^1 \ln\dfrac{1 + xt}{1 + x^2t^2}\,dt.

    Why: A Riemann sum with r/n → t.

  3. Put u=xtu = xt: ln⁡f(x)=∫0xln⁡1+u1+u2 du\ln f(x) = \displaystyle\int_0^x \ln\dfrac{1 + u}{1 + u^2}\,du, so f′(x)f(x)=ln⁡1+x1+x2\dfrac{f'(x)}{f(x)} = \ln\dfrac{1 + x}{1 + x^2}.
  4. 1+x>1+x2  ⟺  x<11 + x > 1 + x^2 \iff x < 1. So ff increases on (0,1)(0, 1) and decreases on (1,∞)(1, \infty).
  5. (A) 12<1\dfrac{1}{2} < 1 in the increasing part, so f(12)<f(1)f\left(\dfrac{1}{2}\right) < f(1): false. (B) 13<23<1\dfrac{1}{3} < \dfrac{2}{3} < 1: f(13)≤f(23)f\left(\dfrac{1}{3}\right) \le f\left(\dfrac{2}{3}\right), true.
  6. (C) f′(2)=f(2)ln⁡35<0f'(2) = f(2)\ln\dfrac{3}{5} < 0 (and f>0f > 0): true. (D) f′(3)f(3)=ln⁡410\dfrac{f'(3)}{f(3)} = \ln\dfrac{4}{10} and f′(2)f(2)=ln⁡35\dfrac{f'(2)}{f(2)} = \ln\dfrac{3}{5}; since 0.4<0.60.4 < 0.6, the inequality fails: false.
AnswerAnswer: (B), (C)
Ask about this question
Q44

Mathematics, Question 44 (4 marks)

Differentiability · +4 / −2
Let a,b∈Ra, b \in \mathbb{R} and f:R→Rf : \mathbb{R} \to \mathbb{R} be defined by f(x)=acos⁡(∣x3−x∣)+b∣x∣sin⁡(∣x3+x∣)f(x) = a\cos(|x^3 - x|) + b|x|\sin(|x^3 + x|). Then ff is
  1. (A)differentiable at x=0x = 0 if a=0a = 0 and b=1b = 1
  2. (B)differentiable at x=1x = 1 if a=1a = 1 and b=0b = 0
  3. (C)NOT differentiable at x=0x = 0 if a=1a = 1 and b=0b = 0
  4. (D)NOT differentiable at x=1x = 1 if a=1a = 1 and b=1b = 1

Tests: Simplify modulus expressions before testing differentiability.

Show solution
  1. Cosine is even, so cos⁡(∣x3−x∣)=cos⁡(x3−x)\cos(|x^3 - x|) = \cos(x^3 - x), which is differentiable everywhere.
  2. x3+x=x(x2+1)x^3 + x = x(x^2 + 1) has the sign of xx, so ∣x3+x∣=∣x∣(x2+1)|x^3 + x| = |x|(x^2 + 1).
  3. For x≥0x \ge 0: ∣x∣sin⁡(∣x3+x∣)=xsin⁡(x3+x)|x|\sin(|x^3 + x|) = x\sin(x^3 + x). For x<0x < 0: (−x)sin⁡(−(x3+x))=xsin⁡(x3+x)(-x)\sin(-(x^3 + x)) = x\sin(x^3 + x). So this term equals xsin⁡(x3+x)x\sin(x^3 + x) for every xx: differentiable everywhere.

    Why: The two moduli cancel each other's sign change.

  4. Hence f(x)=acos⁡(x3−x)+bxsin⁡(x3+x)f(x) = a\cos(x^3 - x) + bx\sin(x^3 + x) is differentiable at every xx, for all a,ba, b.
  5. (A) true, (B) true; (C) and (D) claim non-differentiability, so both are false.
AnswerAnswer: (A), (B)
Ask about this question
Q45

Mathematics, Question 45 (4 marks)

Limits, L'Hospital's rule and extrema · +4 / −2
Let f:R→(0,∞)f : \mathbb{R} \to (0, \infty) and g:R→Rg : \mathbb{R} \to \mathbb{R} be twice differentiable functions such that f′′f'' and g′′g'' are continuous functions on R\mathbb{R}. Suppose f′(2)=g(2)=0f'(2) = g(2) = 0, f′′(2)≠0f''(2) \ne 0 and g′(2)≠0g'(2) \ne 0. If lim⁡x→2f(x)g(x)f′(x)g′(x)=1\displaystyle\lim_{x \to 2} \dfrac{f(x)g(x)}{f'(x)g'(x)} = 1, then
  1. (A)ff has a local minimum at x=2x = 2
  2. (B)ff has a local maximum at x=2x = 2
  3. (C)f′′(2)>f(2)f''(2) > f(2)
  4. (D)f(x)−f′′(x)=0f(x) - f''(x) = 0 for at least one x∈Rx \in \mathbb{R}

Tests: Use L'Hospital's rule to link f(2) and f''(2), then apply the second-derivative test.

Show solution
  1. At x=2x = 2 the numerator f(2)g(2)=0f(2)g(2) = 0 and the denominator f′(2)g′(2)=0f'(2)g'(2) = 0: a 00\dfrac{0}{0} form.
  2. L'Hospital: lim⁡x→2f′g+fg′f′′g′+f′g′′=0+f(2)g′(2)f′′(2)g′(2)+0=f(2)f′′(2)\displaystyle\lim_{x \to 2} \dfrac{f'g + fg'}{f''g' + f'g''} = \dfrac{0 + f(2)g'(2)}{f''(2)g'(2) + 0} = \dfrac{f(2)}{f''(2)}.

    Why: Continuity of f'' and g'' lets us substitute x = 2.

  3. So f(2)f′′(2)=1\dfrac{f(2)}{f''(2)} = 1, i.e. f′′(2)=f(2)>0f''(2) = f(2) > 0 because ff takes only positive values.
  4. (A) f′(2)=0f'(2) = 0 and f′′(2)>0f''(2) > 0: local minimum, true. (B) false.
  5. (C) f′′(2)=f(2)f''(2) = f(2), not greater: false. (D) x=2x = 2 gives f(2)−f′′(2)=0f(2) - f''(2) = 0: true.
AnswerAnswer: (A), (D)
Ask about this question
Q46

Mathematics, Question 46 (4 marks)

Continuity and differentiability (greatest integer function) · +4 / −2
Let f:[−12,2]→Rf : \left[-\dfrac{1}{2}, 2\right] \to \mathbb{R} and g:[−12,2]→Rg : \left[-\dfrac{1}{2}, 2\right] \to \mathbb{R} be functions defined by f(x)=[x2−3]f(x) = [x^2 - 3] and g(x)=∣x∣f(x)+∣4x−7∣f(x)g(x) = |x| f(x) + |4x - 7| f(x), where [y][y] denotes the greatest integer less than or equal to yy for y∈Ry \in \mathbb{R}. Then
  1. (A)ff is discontinuous exactly at three points in [−12,2]\left[-\dfrac{1}{2}, 2\right]
  2. (B)ff is discontinuous exactly at four points in [−12,2]\left[-\dfrac{1}{2}, 2\right]
  3. (C)gg is NOT differentiable exactly at four points in (−12,2)\left(-\dfrac{1}{2}, 2\right)
  4. (D)gg is NOT differentiable exactly at five points in (−12,2)\left(-\dfrac{1}{2}, 2\right)

Tests: Locate jumps of a greatest-integer function and kinks of modulus terms, and see where a zero factor removes a kink.

Show solution
  1. On [−12,2]\left[-\dfrac{1}{2}, 2\right], x2∈[0,4]x^2 \in [0, 4], so x2−3∈[−3,1]x^2 - 3 \in [-3, 1]. The floor can jump only where x2−3x^2 - 3 is an integer and x2x^2 actually crosses it.
  2. f=−3f = -3 on [−12,1)\left[-\dfrac{1}{2}, 1\right), −2-2 on [1,2)[1, \sqrt{2}), −1-1 on [2,3)[\sqrt{2}, \sqrt{3}), 00 on [3,2)[\sqrt{3}, 2), and f(2)=1f(2) = 1. At x=0x = 0, x2−3=−3x^2 - 3 = -3 is a minimum, so ff stays −3-3 on both sides: continuous.
  3. So ff is discontinuous at 1,2,3,21, \sqrt{2}, \sqrt{3}, 2: four points. (A) false, (B) true.
  4. g=h(x)f(x)g = h(x) f(x) with h(x)=∣x∣+∣4x−7∣h(x) = |x| + |4x - 7|; for 0≤x≤740 \le x \le \dfrac{7}{4}, h=7−3x≠0h = 7 - 3x \ne 0. At 1,2,31, \sqrt{2}, \sqrt{3} (3<74\sqrt{3} < \dfrac{7}{4}), ff jumps and h≠0h \ne 0, so gg jumps: not differentiable.
  5. At x=0x = 0: g=−3(7−5x)g = -3(7 - 5x) on the left and −3(7−3x)-3(7 - 3x) on the right; slopes 1515 and 99 differ: not differentiable.
  6. At x=74x = \dfrac{7}{4} the kink of ∣4x−7∣|4x - 7| is multiplied by f=0f = 0 (since 3<74<2\sqrt{3} < \dfrac{7}{4} < 2), so g=0g = 0 near it: differentiable. Total: 0,1,2,30, 1, \sqrt{2}, \sqrt{3}, four points. (C) true, (D) false.
AnswerAnswer: (B), (C)
Ask about this question
Q47

Mathematics, Question 47 (4 marks)

Complex numbers (locus) · +4 / −2
Let a,b∈Ra, b \in \mathbb{R} and a2+b2≠0a^2 + b^2 \ne 0. Suppose S={z∈C:z=1a+ibt, t∈R, t≠0}S = \left\{z \in \mathbb{C} : z = \dfrac{1}{a + ibt},\ t \in \mathbb{R},\ t \ne 0\right\}, where i=−1i = \sqrt{-1}. If z=x+iyz = x + iy and z∈Sz \in S, then (x,y)(x, y) lies on
  1. (A)the circle with radius 12a\dfrac{1}{2a} and centre (12a,0)\left(\dfrac{1}{2a}, 0\right) for a>0, b≠0a > 0,\ b \ne 0
  2. (B)the circle with radius −12a-\dfrac{1}{2a} and centre (−12a,0)\left(-\dfrac{1}{2a}, 0\right) for a<0, b≠0a < 0,\ b \ne 0
  3. (C)the xx-axis for a≠0, b=0a \ne 0,\ b = 0
  4. (D)the yy-axis for a=0, b≠0a = 0,\ b \ne 0

Tests: Find the locus of z = 1/(a + ibt) by eliminating the parameter t.

Show solution
  1. z=a−ibta2+b2t2z = \dfrac{a - ibt}{a^2 + b^2t^2}, so x=aa2+b2t2x = \dfrac{a}{a^2 + b^2t^2} and y=−bta2+b2t2y = \dfrac{-bt}{a^2 + b^2t^2}.
  2. x2+y2=1a2+b2t2=xax^2 + y^2 = \dfrac{1}{a^2 + b^2t^2} = \dfrac{x}{a} when a≠0a \ne 0. So x2+y2−xa=0x^2 + y^2 - \dfrac{x}{a} = 0: centre (12a,0)\left(\dfrac{1}{2a}, 0\right), radius 12∣a∣\dfrac{1}{2|a|}.
  3. (A) a>0a > 0: radius 12a\dfrac{1}{2a}, centre (12a,0)\left(\dfrac{1}{2a}, 0\right): true.
  4. (B) a<0a < 0: the radius −12a-\dfrac{1}{2a} is right, but the centre is (12a,0)\left(\dfrac{1}{2a}, 0\right), on the negative xx-axis, not (−12a,0)\left(-\dfrac{1}{2a}, 0\right): false.

    Why: The centre keeps the sign of a; only the radius takes |a|.

  5. (C) b=0b = 0: z=1az = \dfrac{1}{a} is real, on the xx-axis: true. (D) a=0a = 0: z=1ibt=−ibtz = \dfrac{1}{ibt} = -\dfrac{i}{bt} is purely imaginary, on the yy-axis: true.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q48

Mathematics, Question 48 (4 marks)

Parabola and circle · +4 / −2
Let PP be the point on the parabola y2=4xy^2 = 4x which is at the shortest distance from the center SS of the circle x2+y2−4x−16y+64=0x^2 + y^2 - 4x - 16y + 64 = 0. Let QQ be the point on the circle dividing the line segment SPSP internally. Then
  1. (A)SP=25SP = 2\sqrt{5}
  2. (B)SQ:QP=(5+1):2SQ : QP = (\sqrt{5} + 1) : 2
  3. (C)the xx-intercept of the normal to the parabola at PP is 6
  4. (D)the slope of the tangent to the circle at QQ is 12\dfrac{1}{2}

Tests: Find the nearest point of a parabola to a point using the normal, then use circle geometry along that normal.

Show solution
  1. Circle: centre S(2,8)S(2, 8), radius 4+64−64=2\sqrt{4 + 64 - 64} = 2.
  2. The shortest distance from SS to the parabola is along a normal. Normal at (t2,2t)(t^2, 2t): y=−tx+2t+t3y = -tx + 2t + t^3. Through (2,8)(2, 8): 8=t38 = t^3, so t=2t = 2 and P=(4,4)P = (4, 4).
  3. (A) SP=22+42=25SP = \sqrt{2^2 + 4^2} = 2\sqrt{5}: true.
  4. (B) SQ=2SQ = 2 (radius), QP=25−2QP = 2\sqrt{5} - 2, so SQ:QP=1:(5−1)=(5+1):4SQ : QP = 1 : (\sqrt{5} - 1) = (\sqrt{5} + 1) : 4, not (5+1):2(\sqrt{5} + 1) : 2: false.
  5. (C) Normal at t=2t = 2: y=−2x+12y = -2x + 12, which meets y=0y = 0 at x=6x = 6: true.
  6. (D) The tangent at QQ is perpendicular to the radius SQSQ, which lies along SPSP with slope 4−84−2=−2\dfrac{4 - 8}{4 - 2} = -2. Tangent slope =12= \dfrac{1}{2}: true.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q49

Mathematics, Question 49 (4 marks)

Systems of linear equations · +4 / −2
Let a,λ,μ∈Ra, \lambda, \mu \in \mathbb{R}. Consider the system of linear equations ax+2y=λax + 2y = \lambda, 3x−2y=μ3x - 2y = \mu. Which of the following statement(s) is(are) correct?
  1. (A)If a=−3a = -3, then the system has infinitely many solutions for all values of λ\lambda and μ\mu
  2. (B)If a≠−3a \ne -3, then the system has a unique solution for all values of λ\lambda and μ\mu
  3. (C)If λ+μ=0\lambda + \mu = 0, then the system has infinitely many solutions for a=−3a = -3
  4. (D)If λ+μ≠0\lambda + \mu \ne 0, then the system has no solution for a=−3a = -3

Tests: Classify a 2 × 2 linear system as unique, infinite or inconsistent from the determinant and the constants.

Show solution
  1. Coefficient determinant: ∣a23−2∣=−2a−6=−2(a+3)\begin{vmatrix} a & 2 \\ 3 & -2 \end{vmatrix} = -2a - 6 = -2(a + 3).
  2. (B) a≠−3a \ne -3: determinant non-zero, unique solution for every λ,μ\lambda, \mu: true.
  3. For a=−3a = -3 the equations are −3x+2y=λ-3x + 2y = \lambda and 3x−2y=μ3x - 2y = \mu. Adding gives 0=λ+μ0 = \lambda + \mu.

    Why: The left sides are negatives of each other.

  4. (C) λ+μ=0\lambda + \mu = 0: the two equations are the same line, infinitely many solutions: true. (D) λ+μ≠0\lambda + \mu \ne 0: parallel lines, no solution: true.
  5. (A) claims infinitely many solutions for all λ,μ\lambda, \mu when a=−3a = -3; it fails whenever λ+μ≠0\lambda + \mu \ne 0: false.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q50

Mathematics, Question 50 (4 marks)

Vectors (cross and scalar triple product) · +4 / −2
Let u^=u1i^+u2j^+u3k^\hat{u} = u_1\hat{i} + u_2\hat{j} + u_3\hat{k} be a unit vector in R3\mathbb{R}^3 and w^=16(i^+j^+2k^)\hat{w} = \dfrac{1}{\sqrt{6}}(\hat{i} + \hat{j} + 2\hat{k}). Given that there exists a vector v⃗\vec{v} in R3\mathbb{R}^3 such that ∣u^×v⃗∣=1|\hat{u} \times \vec{v}| = 1 and w^⋅(u^×v⃗)=1\hat{w} \cdot (\hat{u} \times \vec{v}) = 1. Which of the following statement(s) is(are) correct?
  1. (A)There is exactly one choice for such v⃗\vec{v}
  2. (B)There are infinitely many choices for such v⃗\vec{v}
  3. (C)If u^\hat{u} lies in the xyxy-plane then ∣u1∣=∣u2∣|u_1| = |u_2|
  4. (D)If u^\hat{u} lies in the xzxz-plane then 2∣u1∣=∣u3∣2|u_1| = |u_3|

Tests: Use the equality case of the dot product to fix a cross product, and see that v is not unique.

Show solution
  1. u^×v⃗\hat{u} \times \vec{v} has length 1 and its dot product with the unit vector w^\hat{w} is 1, so the angle between them is 0: u^×v⃗=w^\hat{u} \times \vec{v} = \hat{w}.
  2. So w^⊥u^\hat{w} \perp \hat{u}: u1+u2+2u3=0u_1 + u_2 + 2u_3 = 0. Then v⃗0=w^×u^\vec{v}_0 = \hat{w} \times \hat{u} works, since u^×(w^×u^)=w^(u^⋅u^)−u^(u^⋅w^)=w^\hat{u} \times (\hat{w} \times \hat{u}) = \hat{w}(\hat{u} \cdot \hat{u}) - \hat{u}(\hat{u} \cdot \hat{w}) = \hat{w}.
  3. Adding any multiple of u^\hat{u} leaves the cross product unchanged: v⃗=v⃗0+ku^\vec{v} = \vec{v}_0 + k\hat{u} for every real kk. (A) false, (B) true.
  4. (C) In the xyxy-plane u3=0u_3 = 0, so u1+u2=0u_1 + u_2 = 0 and ∣u1∣=∣u2∣|u_1| = |u_2|: true.
  5. (D) In the xzxz-plane u2=0u_2 = 0, so u1=−2u3u_1 = -2u_3, i.e. ∣u1∣=2∣u3∣|u_1| = 2|u_3|. Then 2∣u1∣=∣u3∣2|u_1| = |u_3| would force u1=u3=0u_1 = u_3 = 0, impossible for a unit vector: false.
AnswerAnswer: (B), (C)
Ask about this question

Mathematics, Section 3: 2 paragraphs with 2 questions each, only one option correct: +3 if only the bubble of the correct option is darkened, 0 in all other cases

Q51

Mathematics, Question 51 (3 marks)

Probability (independent events) · +3
Paragraph: Football teams T1T_1 and T2T_2 have to play two games against each other. It is assumed that the outcomes of the two games are independent. The probabilities of T1T_1 winning, drawing and losing a game against T2T_2 are 12\dfrac{1}{2}, 16\dfrac{1}{6} and 13\dfrac{1}{3}, respectively. Each team gets 3 points for a win, 1 point for a draw and 0 point for a loss in a game. Let XX and YY denote the total points scored by teams T1T_1 and T2T_2, respectively, after two games.

Question: P(X>Y)P(X > Y) is
  1. (A)14\dfrac{1}{4}
  2. (B)512\dfrac{5}{12}
  3. (C)12\dfrac{1}{2}
  4. (D)712\dfrac{7}{12}

Tests: List the outcome pairs of two independent games that give one team more points.

Show solution
  1. In one game, T1T_1's points minus T2T_2's points is +3+3 (win, 12\dfrac{1}{2}), 00 (draw, 16\dfrac{1}{6}) or −3-3 (loss, 13\dfrac{1}{3}). X−YX - Y is the sum over the two games.
  2. X>YX > Y means the sum is positive: WW, or one win and one draw (WD, DW). A win and a loss give 0.
  3. P(WW)=14P(WW) = \dfrac{1}{4}; P(WD)+P(DW)=2⋅12⋅16=16P(WD) + P(DW) = 2 \cdot \dfrac{1}{2} \cdot \dfrac{1}{6} = \dfrac{1}{6}.
  4. P(X>Y)=14+16=512P(X > Y) = \dfrac{1}{4} + \dfrac{1}{6} = \dfrac{5}{12}.
AnswerAnswer: (B) 512\dfrac{5}{12}
Ask about this question
Q52

Mathematics, Question 52 (3 marks)

Probability (independent events) · +3
Paragraph: Football teams T1T_1 and T2T_2 have to play two games against each other. It is assumed that the outcomes of the two games are independent. The probabilities of T1T_1 winning, drawing and losing a game against T2T_2 are 12\dfrac{1}{2}, 16\dfrac{1}{6} and 13\dfrac{1}{3}, respectively. Each team gets 3 points for a win, 1 point for a draw and 0 point for a loss in a game. Let XX and YY denote the total points scored by teams T1T_1 and T2T_2, respectively, after two games.

Question: P(X=Y)P(X = Y) is
  1. (A)1136\dfrac{11}{36}
  2. (B)13\dfrac{1}{3}
  3. (C)1336\dfrac{13}{36}
  4. (D)12\dfrac{1}{2}

Tests: Find the probability of a points tie over two independent games.

Show solution
  1. X=YX = Y when the per-game differences (+3+3, 00, −3-3) add to 0: DD, WL or LW.
  2. P(DD)=136P(DD) = \dfrac{1}{36}; P(WL)+P(LW)=2⋅12⋅13=13=1236P(WL) + P(LW) = 2 \cdot \dfrac{1}{2} \cdot \dfrac{1}{3} = \dfrac{1}{3} = \dfrac{12}{36}.
  3. P(X=Y)=136+1236=1336P(X = Y) = \dfrac{1}{36} + \dfrac{12}{36} = \dfrac{13}{36}.
  4. Check: P(X<Y)=19+2⋅13⋅16=29P(X < Y) = \dfrac{1}{9} + 2 \cdot \dfrac{1}{3} \cdot \dfrac{1}{6} = \dfrac{2}{9}, and 1536+1336+836=1\dfrac{15}{36} + \dfrac{13}{36} + \dfrac{8}{36} = 1.
AnswerAnswer: (C) 1336\dfrac{13}{36}
Ask about this question
Q53

Mathematics, Question 53 (3 marks)

Ellipse and parabola · +3
Paragraph: Let F1(x1,0)F_1(x_1, 0) and F2(x2,0)F_2(x_2, 0), for x1<0x_1 < 0 and x2>0x_2 > 0, be the foci of the ellipse x29+y28=1\dfrac{x^2}{9} + \dfrac{y^2}{8} = 1. Suppose a parabola having vertex at the origin and focus at F2F_2 intersects the ellipse at point MM in the first quadrant and at point NN in the fourth quadrant.

Question: The orthocentre of the triangle F1MNF_1MN is
  1. (A)(−910,0)\left(-\dfrac{9}{10}, 0\right)
  2. (B)(23,0)\left(\dfrac{2}{3}, 0\right)
  3. (C)(910,0)\left(\dfrac{9}{10}, 0\right)
  4. (D)(23,6)\left(\dfrac{2}{3}, \sqrt{6}\right)

Tests: Intersect an ellipse with a parabola and find the orthocentre of a symmetric triangle.

Show solution
  1. Ellipse: a2=9a^2 = 9, b2=8b^2 = 8, e2=1−89=19e^2 = 1 - \dfrac{8}{9} = \dfrac{1}{9}, so ae=1ae = 1: F1(−1,0)F_1(-1, 0), F2(1,0)F_2(1, 0).
  2. Parabola with vertex OO and focus (1,0)(1, 0): y2=4xy^2 = 4x. Substituting: x29+x2=1\dfrac{x^2}{9} + \dfrac{x}{2} = 1, i.e. 2x2+9x−18=02x^2 + 9x - 18 = 0, x=32x = \dfrac{3}{2} (the root −6-6 is rejected).
  3. y2=6y^2 = 6: M(32,6)M\left(\dfrac{3}{2}, \sqrt{6}\right), N(32,−6)N\left(\dfrac{3}{2}, -\sqrt{6}\right).
  4. The triangle is symmetric about the xx-axis, so the orthocentre is (h,0)(h, 0). Slope of F1NF_1N =−65/2=−265= \dfrac{-\sqrt{6}}{5/2} = -\dfrac{2\sqrt{6}}{5}, so the altitude from MM has slope 526\dfrac{5}{2\sqrt{6}}.
  5. Altitude from MM at y=0y = 0: −6=526(h−32)-\sqrt{6} = \dfrac{5}{2\sqrt{6}}\left(h - \dfrac{3}{2}\right), so h−32=−125h - \dfrac{3}{2} = -\dfrac{12}{5} and h=−910h = -\dfrac{9}{10}.
AnswerAnswer: (A) (−910,0)\left(-\dfrac{9}{10}, 0\right)
Ask about this question
Q54

Mathematics, Question 54 (3 marks)

Ellipse and parabola (tangents, normals, areas) · +3
Paragraph: Let F1(x1,0)F_1(x_1, 0) and F2(x2,0)F_2(x_2, 0), for x1<0x_1 < 0 and x2>0x_2 > 0, be the foci of the ellipse x29+y28=1\dfrac{x^2}{9} + \dfrac{y^2}{8} = 1. Suppose a parabola having vertex at the origin and focus at F2F_2 intersects the ellipse at point MM in the first quadrant and at point NN in the fourth quadrant.

Question: If the tangents to the ellipse at MM and NN meet at RR and the normal to the parabola at MM meets the xx-axis at QQ, then the ratio of area of the triangle MQRMQR to area of the quadrilateral MF1NF2MF_1NF_2 is
  1. (A)3 : 4
  2. (B)4 : 5
  3. (C)5 : 8
  4. (D)2 : 3

Tests: Use tangent and normal equations to find points on the axis, then compare areas.

Show solution
  1. From the paragraph: F1(−1,0)F_1(-1, 0), F2(1,0)F_2(1, 0), M(32,6)M\left(\dfrac{3}{2}, \sqrt{6}\right), N(32,−6)N\left(\dfrac{3}{2}, -\sqrt{6}\right) (see Q53).
  2. Tangent to the ellipse at MM: x⋅3/29+y68=1\dfrac{x \cdot 3/2}{9} + \dfrac{y\sqrt{6}}{8} = 1. By symmetry RR is on the xx-axis: y=0y = 0 gives x=6x = 6, so R(6,0)R(6, 0).
  3. On y2=4xy^2 = 4x, MM is the point t=62t = \dfrac{\sqrt{6}}{2}. Normal: y=−tx+2t+t3y = -tx + 2t + t^3 meets y=0y = 0 at x=2+t2=72x = 2 + t^2 = \dfrac{7}{2}, so Q(72,0)Q\left(\dfrac{7}{2}, 0\right).
  4. Area of MQR=12⋅QR⋅6=12⋅52⋅6=564MQR = \dfrac{1}{2} \cdot QR \cdot \sqrt{6} = \dfrac{1}{2} \cdot \dfrac{5}{2} \cdot \sqrt{6} = \dfrac{5\sqrt{6}}{4}.
  5. MF1NF2MF_1NF_2 has perpendicular diagonals F1F2=2F_1F_2 = 2 and MN=26MN = 2\sqrt{6}: area =12⋅2⋅26=26= \dfrac{1}{2} \cdot 2 \cdot 2\sqrt{6} = 2\sqrt{6}.
  6. Ratio =56/426=58= \dfrac{5\sqrt{6}/4}{2\sqrt{6}} = \dfrac{5}{8}.
AnswerAnswer: (C) 5 : 8
Ask about this question

Questions are quoted from JEE (Advanced) 2016 Paper 2 (English); figures are described in words. Every final answer is checked against the official final answer key. Where the official key accepts more than one answer, or gave every candidate full marks, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.