AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2018 Paper 1: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2018 Paper 1 solved step by step: Physics, Chemistry and Mathematics, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2018 Paper 1: 54 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2018: Paper 2.

Physics, Section 1: 6 questions, one or more options correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct but only three are chosen; +2 if three or more options are correct but only two are chosen, both correct; +1 if two or more options are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Physics, Question 1 (4 marks)

Circular motion (central force) · +4 / −2
The potential energy of a particle of mass mm at a distance rr from a fixed point OO is given by V(r)=kr2/2V(r) = kr^2/2, where kk is a positive constant of appropriate dimensions. This particle is moving in a circular orbit of radius RR about the point OO. If vv is the speed of the particle and LL is the magnitude of its angular momentum about OO, which of the following statements is (are) true?
  1. (A)v=k2m Rv = \sqrt{\dfrac{k}{2m}}\,R
  2. (B)v=km Rv = \sqrt{\dfrac{k}{m}}\,R
  3. (C)L=mk R2L = \sqrt{mk}\,R^2
  4. (D)L=mk2 R2L = \sqrt{\dfrac{mk}{2}}\,R^2

Tests: Use force = −dV/dr as the centripetal force, then find speed and angular momentum.

Show solution
  1. The force is F=−dVdr=−krF = -\dfrac{dV}{dr} = -kr: an attraction towards OO of magnitude kRkR on the orbit.
  2. This force supplies the centripetal force: kR=mv2RkR = \dfrac{mv^2}{R}, so v=km Rv = \sqrt{\dfrac{k}{m}}\,R. (B) is true and (A) is false.
  3. L=mvR=mkm R⋅R=mk R2L = mvR = m\sqrt{\dfrac{k}{m}}\,R \cdot R = \sqrt{mk}\,R^2. (C) is true and (D) is false.
AnswerAnswer: (B), (C)
Ask about this question
Q2

Physics, Question 2 (4 marks)

Torque and kinematics with a time-varying force · +4 / −2
Consider a body of mass 1.0 kg at rest at the origin at time t=0t = 0. A force F⃗=(αt i^+β j^)\vec{F} = (\alpha t\,\hat{i} + \beta\,\hat{j}) is applied on the body, where α=1.0 N s−1\alpha = 1.0\ \text{N s}^{-1} and β=1.0\beta = 1.0 N. The torque acting on the body about the origin at time t=1.0t = 1.0 s is τ⃗\vec{\tau}. Which of the following statements is (are) true?
  1. (A)∣τ⃗∣=13|\vec{\tau}| = \dfrac{1}{3} N m
  2. (B)The torque τ⃗\vec{\tau} is in the direction of the unit vector +k^+\hat{k}
  3. (C)The velocity of the body at t=1t = 1 s is v⃗=12(i^+2j^) m s−1\vec{v} = \dfrac{1}{2}(\hat{i} + 2\hat{j})\ \text{m s}^{-1}
  4. (D)The magnitude of displacement of the body at t=1t = 1 s is 16\dfrac{1}{6} m

Tests: Integrate a time-dependent force to get velocity and position, then take r × F for the torque.

Show solution
  1. With m=1m = 1 kg, a⃗=t i^+j^\vec{a} = t\,\hat{i} + \hat{j}. Integrating from rest: v⃗=t22i^+t j^\vec{v} = \dfrac{t^2}{2}\hat{i} + t\,\hat{j}, and from the origin: r⃗=t36i^+t22j^\vec{r} = \dfrac{t^3}{6}\hat{i} + \dfrac{t^2}{2}\hat{j}.
  2. At t=1t = 1 s: v⃗=12i^+j^=12(i^+2j^)\vec{v} = \dfrac{1}{2}\hat{i} + \hat{j} = \dfrac{1}{2}(\hat{i} + 2\hat{j}) m/s. (C) is true.
  3. At t=1t = 1 s: r⃗=16i^+12j^\vec{r} = \dfrac{1}{6}\hat{i} + \dfrac{1}{2}\hat{j}, so ∣r⃗∣=136+14=106|\vec{r}| = \sqrt{\dfrac{1}{36} + \dfrac{1}{4}} = \dfrac{\sqrt{10}}{6} m, not 16\dfrac16 m. (D) is false.
  4. F⃗(1)=i^+j^\vec{F}(1) = \hat{i} + \hat{j}, so τ⃗=r⃗×F⃗=(16⋅1−12⋅1)k^=−13k^\vec{\tau} = \vec{r} \times \vec{F} = \left(\dfrac16 \cdot 1 - \dfrac12 \cdot 1\right)\hat{k} = -\dfrac{1}{3}\hat{k} N m.

    Why: For vectors in the xy-plane, (x i + y j) × (Fx i + Fy j) = (x Fy − y Fx) k.

  5. So ∣τ⃗∣=13|\vec{\tau}| = \dfrac13 N m: (A) is true. The torque points along −k^-\hat{k}: (B) is false.
AnswerAnswer: (A), (C)
Ask about this question
Q3

Physics, Question 3 (4 marks)

Surface tension (capillary rise) · +4 / −2
A uniform capillary tube of inner radius rr is dipped vertically into a beaker filled with water. The water rises to a height hh in the capillary tube above the water surface in the beaker. The surface tension of water is σ\sigma. The angle of contact between water and the wall of the capillary tube is θ\theta. Ignore the mass of water in the meniscus. Which of the following statements is (are) true?
  1. (A)For a given material of the capillary tube, hh decreases with increase in rr
  2. (B)For a given material of the capillary tube, hh is independent of σ\sigma
  3. (C)If this experiment is performed in a lift going up with a constant acceleration, then hh decreases
  4. (D)hh is proportional to contact angle θ\theta

Tests: Use Jurin's law h = 2σcosθ/(rρg) and see how h changes with each quantity.

Show solution
  1. Balance the upward surface-tension pull on the column against its weight: 2πrσcos⁡θ=πr2hρg2\pi r\sigma\cos\theta = \pi r^2 h\rho g, so h=2σcos⁡θrρgh = \dfrac{2\sigma\cos\theta}{r\rho g}.
  2. (A): h∝1rh \propto \dfrac{1}{r}, so hh decreases as rr increases. True.
  3. (B): h∝σh \propto \sigma, so it is not independent of σ\sigma. False.
  4. (C): in a lift accelerating upward with aa, the effective gravity is g+ag + a, so h=2σcos⁡θrρ(g+a)h = \dfrac{2\sigma\cos\theta}{r\rho(g + a)} is smaller. True.

    Why: In the lift's frame a pseudo-force ma acts downward, adding to the weight.

  5. (D): h∝cos⁡θh \propto \cos\theta, not θ\theta. False.
AnswerAnswer: (A), (C)
Ask about this question
Q4

Physics, Question 4 (4 marks)

LR circuits (growth of current) · +4 / −2
In the figure below, the switches S1S_1 and S2S_2 are closed simultaneously at t=0t = 0 and a current starts to flow in the circuit. Both the batteries have the same magnitude of the electromotive force (emf) and the polarities are as indicated in the figure. Ignore mutual inductance between the inductors. The current II in the middle wire reaches its maximum magnitude ImaxI_{max} at time t=τt = \tau. Which of the following statements is (are) true? (The figure shows two loops sharing a vertical middle wire. The left loop: a battery of emf VV on the left side with its positive plate at the top, a resistor RR and an inductor LL along the top wire, the middle wire, and the switch S1S_1 in the bottom wire. The right loop: the middle wire, a resistor RR and an inductor 2L2L along the top wire, a battery of emf VV on the right side with its positive plate at the bottom, and the switch S2S_2 in the bottom wire. The current II is marked downward in the middle wire.)
  1. (A)Imax=V2RI_{max} = \dfrac{V}{2R}
  2. (B)Imax=V4RI_{max} = \dfrac{V}{4R}
  3. (C)τ=LRln⁡2\tau = \dfrac{L}{R}\ln 2
  4. (D)τ=2LRln⁡2\tau = \dfrac{2L}{R}\ln 2

Tests: Treat each R-L loop separately and subtract their currents in the shared wire.

Show solution
  1. The middle wire has no resistance, so it ties the two loops to the same pair of junctions and each loop grows on its own: i1=VR(1−e−Rt/L)i_1 = \dfrac{V}{R}\left(1 - e^{-Rt/L}\right) in the left loop and i2=VR(1−e−Rt/2L)i_2 = \dfrac{V}{R}\left(1 - e^{-Rt/2L}\right) in the right loop.

    Why: Each loop's emf, R and L sum to zero around that loop without involving the other loop.

  2. Polarities: the left battery drives its current down the middle wire; the right battery (positive at the bottom) drives its current up the middle wire. So I=i1−i2=VR(e−Rt/2L−e−Rt/L)I = i_1 - i_2 = \dfrac{V}{R}\left(e^{-Rt/2L} - e^{-Rt/L}\right).
  3. Let x=e−Rt/2Lx = e^{-Rt/2L}, so I=VR(x−x2)I = \dfrac{V}{R}(x - x^2). This is largest at x=12x = \dfrac12, where x−x2=14x - x^2 = \dfrac14.
  4. Imax=V4RI_{max} = \dfrac{V}{4R}: (B) is true, (A) false.
  5. e−Rτ/2L=12⇒τ=2LRln⁡2e^{-R\tau/2L} = \dfrac12 \Rightarrow \tau = \dfrac{2L}{R}\ln 2: (D) is true, (C) false.
AnswerAnswer: (B), (D)
Ask about this question
Q5

Physics, Question 5 (4 marks)

Magnetic field of currents (wires and a loop) · +4 / −2
Two infinitely long straight wires lie in the xyxy-plane along the lines x=±Rx = \pm R. The wire located at x=+Rx = +R carries a constant current I1I_1 and the wire located at x=−Rx = -R carries a constant current I2I_2. A circular loop of radius RR is suspended with its centre at (0,0,3R)(0, 0, \sqrt{3}R) and in a plane parallel to the xyxy-plane. This loop carries a constant current II in the clockwise direction as seen from above the loop. The current in the wire is taken to be positive if it is in the +j^+\hat{j} direction. Which of the following statements regarding the magnetic field B⃗\vec{B} is (are) true?
  1. (A)If I1=I2I_1 = I_2, then B⃗\vec{B} cannot be equal to zero at the origin (0,0,0)(0, 0, 0)
  2. (B)If I1>0I_1 > 0 and I2<0I_2 < 0, then B⃗\vec{B} can be equal to zero at the origin (0,0,0)(0, 0, 0)
  3. (C)If I1<0I_1 < 0 and I2>0I_2 > 0, then B⃗\vec{B} can be equal to zero at the origin (0,0,0)(0, 0, 0)
  4. (D)If I1=I2I_1 = I_2, then the zz-component of the magnetic field at the centre of the loop is (−μ0I2R)\left(-\dfrac{\mu_0 I}{2R}\right)

Tests: Superpose fields of two straight wires and a loop, keeping track of each direction.

Show solution
  1. Wires at the origin (distance RR from each): the wire at x=+Rx = +R gives μ0I12πR(+k^)\dfrac{\mu_0 I_1}{2\pi R}(+\hat{k}) and the wire at x=−Rx = -R gives μ0I22πR(−k^)\dfrac{\mu_0 I_2}{2\pi R}(-\hat{k}). Together: μ0(I1−I2)2πRk^\dfrac{\mu_0 (I_1 - I_2)}{2\pi R}\hat{k}.

    Why: Direction of I ĵ × r̂: for the wire at x = +R the origin is in the −î direction, and ĵ × (−î) = +k̂; for the wire at x = −R, ĵ × î = −k̂.

  2. Loop at the origin (on its axis, at distance 3R\sqrt3 R): clockwise seen from above means its field on the axis points along −k^-\hat{k}, of size μ0IR22(R2+3R2)3/2=μ0I16R\dfrac{\mu_0 I R^2}{2(R^2 + 3R^2)^{3/2}} = \dfrac{\mu_0 I}{16R}. So Bz(0)=μ0(I1−I2)2πR−μ0I16RB_z(0) = \dfrac{\mu_0 (I_1 - I_2)}{2\pi R} - \dfrac{\mu_0 I}{16R}.
  3. (A): I1=I2I_1 = I_2 leaves only −μ0I16R≠0-\dfrac{\mu_0 I}{16R} \neq 0. True. (B): I1>0>I2I_1 > 0 > I_2 makes I1−I2>0I_1 - I_2 > 0, which can cancel the loop's −k^-\hat{k} field. True. (C): I1<0<I2I_1 < 0 < I_2 makes the wire field also along −k^-\hat{k}, adding to the loop's; no cancellation. False.
  4. (D): at the loop's centre each wire is at distance R2+3R2=2R\sqrt{R^2 + 3R^2} = 2R. For equal currents the two wire fields have equal and opposite zz-components (the xx-components add), so only the loop contributes to BzB_z: −μ0I2R-\dfrac{\mu_0 I}{2R}. True.

    Why: By symmetry about the plane x = 0, the z-parts from the two equal currents cancel at any point on the z-axis.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Thermodynamic processes (T-V diagram) · +4 / −2
One mole of a monatomic ideal gas undergoes a cyclic process as shown in the figure (where VV is the volume and TT is the temperature). Which of the statements below is (are) true? (The figure is a TT (vertical) against VV (horizontal) graph of a cycle: process I is a curve rising steeply from the lower temperature to the higher temperature while the volume decreases slightly; process II is a horizontal line at the higher temperature, going towards larger volume; process III is a curve falling from the higher temperature to the lower temperature as the volume increases; process IV is a horizontal line at the lower temperature, going back towards smaller volume.)
  1. (A)Process I is an isochoric process
  2. (B)In process II, gas absorbs heat
  3. (C)In process IV, gas releases heat
  4. (D)Processes I and III are not isobaric

Tests: Read processes on a T-V graph: horizontal = isothermal, vertical = isochoric, line through origin = isobaric.

Show solution
  1. (A): an isochoric process is a vertical line on a TT-VV graph. Process I is a curve along which VV changes, so it is not isochoric. False.
  2. (B): process II is isothermal (ΔU=0\Delta U = 0) with the volume increasing, so W>0W > 0 and Q=W>0Q = W > 0: the gas absorbs heat. True.
  3. (C): process IV is isothermal with the volume decreasing, so W<0W < 0 and Q=W<0Q = W < 0: the gas releases heat. True.
  4. (D): at constant pressure T=PnRVT = \dfrac{P}{nR}V, a straight line through the origin with TT rising as VV rises. In I, TT rises while VV falls; in III, TT falls while VV rises. Neither is isobaric. True.
AnswerAnswer: (B), (C), (D)
Ask about this question

Physics, Section 2: 8 questions, the answer is a numerical value (truncated or rounded off to the second decimal place): +3 if only the correct value is entered, 0 in all other cases

Q7

Physics, Question 7 (3 marks)

Vectors (magnitude of sum and difference) · +3
Two vectors A⃗\vec{A} and B⃗\vec{B} are defined as A⃗=a i^\vec{A} = a\,\hat{i} and B⃗=a(cos⁡ωt i^+sin⁡ωt j^)\vec{B} = a(\cos\omega t\,\hat{i} + \sin\omega t\,\hat{j}), where aa is a constant and ω=π/6 rad s−1\omega = \pi/6\ \text{rad s}^{-1}. If ∣A⃗+B⃗∣=3 ∣A⃗−B⃗∣|\vec{A} + \vec{B}| = \sqrt{3}\,|\vec{A} - \vec{B}| at time t=τt = \tau for the first time, the value of τ\tau, in seconds, is ______.

Tests: Use |A ± B|² = A² + B² ± 2AB cos θ for two equal vectors at angle ωt.

Show solution
  1. Both vectors have magnitude aa and the angle between them is ωt\omega t. So ∣A⃗+B⃗∣2=2a2(1+cos⁡ωt)|\vec{A} + \vec{B}|^2 = 2a^2(1 + \cos\omega t) and ∣A⃗−B⃗∣2=2a2(1−cos⁡ωt)|\vec{A} - \vec{B}|^2 = 2a^2(1 - \cos\omega t).
  2. Square the condition: 1+cos⁡ωt=3(1−cos⁡ωt)⇒cos⁡ωt=121 + \cos\omega t = 3(1 - \cos\omega t) \Rightarrow \cos\omega t = \dfrac12.
  3. First time: ωτ=π3\omega\tau = \dfrac{\pi}{3}, so τ=π/3π/6=2\tau = \dfrac{\pi/3}{\pi/6} = 2 s.
AnswerAnswer: 2.00
Ask about this question
Q8

Physics, Question 8 (3 marks)

Doppler effect and beats · +3
Two men are walking along a horizontal straight line in the same direction. The man in front walks at a speed 1.0 m s−11.0\ \text{m s}^{-1} and the man behind walks at a speed 2.0 m s−12.0\ \text{m s}^{-1}. A third man is standing at a height 12 m above the same horizontal line such that all three men are in a vertical plane. The two walking men are blowing identical whistles which emit a sound of frequency 1430 Hz. The speed of sound in air is 330 m s−1330\ \text{m s}^{-1}. At the instant, when the moving men are 10 m apart, the stationary man is equidistant from them. The frequency of beats in Hz, heard by the stationary man at this instant, is ______.

Tests: Apply the Doppler formula with the velocity component along the line joining source and listener.

Show solution
  1. Equidistant means the stationary man is directly above the midpoint: each walker is 5 m away horizontally and 12 m below, so the line of sight is 13 m long and makes cos⁡θ=513\cos\theta = \dfrac{5}{13} with the ground.
  2. Velocity components along the line of sight: the man behind approaches at 2×513=10132 \times \dfrac{5}{13} = \dfrac{10}{13} m/s; the man in front recedes at 1×513=5131 \times \dfrac{5}{13} = \dfrac{5}{13} m/s.
  3. f1=1430×330330−10/13=1430×330×134280≈1433.34f_1 = 1430 \times \dfrac{330}{330 - 10/13} = \dfrac{1430 \times 330 \times 13}{4280} \approx 1433.34 Hz and f2=1430×330330+5/13=1430×330×134295≈1428.34f_2 = 1430 \times \dfrac{330}{330 + 5/13} = \dfrac{1430 \times 330 \times 13}{4295} \approx 1428.34 Hz.
  4. Beat frequency =f1−f2≈5.0058= f_1 - f_2 \approx 5.0058 Hz. To first order in u/vu/v: Δf≈f0(10+5)/13330=1430×1513×330=5\Delta f \approx f_0\dfrac{(10 + 5)/13}{330} = \dfrac{1430 \times 15}{13 \times 330} = 5 Hz exactly.

    Why: Source speeds (under 1 m/s along the line) are tiny compared with 330 m/s, so the first-order result is what the question is built on.

  5. The paper allows the value truncated or rounded off to two decimals: 5.0058 truncates to 5.00, the published key's value.

    Why: Rounding would give 5.01; the page uses the truncated entry the instructions allow.

AnswerAnswer: 5.00 Hz
Ask about this question
Q9

Physics, Question 9 (3 marks)

Rolling motion on an incline · +3
A ring and a disc are initially at rest, side by side, at the top of an inclined plane which makes an angle 60∘60^\circ with the horizontal. They start to roll without slipping at the same instant of time along the shortest path. If the time difference between their reaching the ground is (2−3)/10(2 - \sqrt{3})/\sqrt{10} s, then the height of the top of the inclined plane, in metres, is ______. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

Tests: Find rolling accelerations from the moment of inertia and compare times down the same incline.

Show solution
  1. Rolling without slipping: a=gsin⁡θ1+I/(mr2)a = \dfrac{g\sin\theta}{1 + I/(mr^2)}. Ring (I=mr2I = mr^2): ar=gsin⁡60∘2a_r = \dfrac{g\sin 60^\circ}{2}. Disc (I=12mr2I = \tfrac12 mr^2): ad=2gsin⁡60∘3a_d = \dfrac{2g\sin 60^\circ}{3}.
  2. Path length s=hsin⁡60∘s = \dfrac{h}{\sin 60^\circ} and t=2sat = \sqrt{\dfrac{2s}{a}}. With sin⁡260∘=34\sin^2 60^\circ = \dfrac34 and g=10g = 10: tr=4hg⋅3/4=8h15t_r = \sqrt{\dfrac{4h}{g \cdot 3/4}} = \sqrt{\dfrac{8h}{15}} and td=3hg⋅3/4=6h15t_d = \sqrt{\dfrac{3h}{g \cdot 3/4}} = \sqrt{\dfrac{6h}{15}}.
  3. tr−td=h15(8−6)=2h15 (2−3)t_r - t_d = \sqrt{\dfrac{h}{15}}\left(\sqrt8 - \sqrt6\right) = \sqrt{\dfrac{2h}{15}}\,(2 - \sqrt3).
  4. Set equal to 2−310\dfrac{2 - \sqrt3}{\sqrt{10}}: 2h15=110⇒h=0.75\dfrac{2h}{15} = \dfrac{1}{10} \Rightarrow h = 0.75 m.
AnswerAnswer: 0.75 m
Ask about this question
Q10

Physics, Question 10 (3 marks)

Collisions and SHM (spring-block) · +3
A spring-block system is resting on a frictionless floor as shown in the figure. The spring constant is 2.0 N m−12.0\ \text{N m}^{-1} and the mass of the block is 2.0 kg. Ignore the mass of the spring. Initially the spring is in an unstretched condition. Another block of mass 1.0 kg moving with a speed of 2.0 m s−12.0\ \text{m s}^{-1} collides elastically with the first block. The collision is such that the 2.0 kg block does not hit the wall. The distance, in metres, between the two blocks when the spring returns to its unstretched position for the first time after the collision is ______. (The figure shows, from left to right on the floor: the 1 kg block moving right at 2 m s−12\ \text{m s}^{-1}, the 2 kg block at rest, and the spring joining the 2 kg block to a vertical wall on the right.)

Tests: Get post-collision velocities, then use half the SHM period for the block's return.

Show solution
  1. Elastic collision, 1 kg at 2 m/s on 2 kg at rest: v1=1−23×2=−23v_1 = \dfrac{1 - 2}{3} \times 2 = -\dfrac23 m/s (1 kg bounces back) and v2=2×13×2=43v_2 = \dfrac{2 \times 1}{3} \times 2 = \dfrac43 m/s.
  2. The 2 kg block now oscillates on the spring with ω=k/m=2/2=1\omega = \sqrt{k/m} = \sqrt{2/2} = 1 rad/s. It returns to the unstretched position for the first time after half a period: t=πω=πt = \dfrac{\pi}{\omega} = \pi s.

    Why: It starts at the natural length, compresses the spring, and comes back after T/2.

  3. In that time the 1 kg block moves away at 23\dfrac23 m/s: it covers 2π3\dfrac{2\pi}{3} m from the collision point, which is where the 2 kg block is again.
  4. Distance between the blocks =2π3≈2.094= \dfrac{2\pi}{3} \approx 2.094 m.
AnswerAnswer: 2.09 m
Ask about this question
Q11

Physics, Question 11 (3 marks)

Capacitors (charge sharing, dielectric) · +3
Three identical capacitors C1C_1, C2C_2 and C3C_3 have a capacitance of 1.0 μF1.0\ \mu\text{F} each and they are uncharged initially. They are connected in a circuit as shown in the figure and C1C_1 is then filled completely with a dielectric material of relative permittivity ϵr\epsilon_r. The cell electromotive force (emf) V0=8V_0 = 8 V. First the switch S1S_1 is closed while the switch S2S_2 is kept open. When the capacitor C3C_3 is fully charged, S1S_1 is opened and S2S_2 is closed simultaneously. When all the capacitors reach equilibrium, the charge on C3C_3 is found to be 5 μC5\ \mu\text{C}. The value of ϵr\epsilon_r = ______. (The figure shows three vertical branches between a common top wire and a common bottom wire: on the left the cell V0V_0 in series with switch S1S_1; in the middle switch S2S_2 in series with C1C_1 (filled with dielectric) and C2C_2; on the right C3C_3.)

Tests: Use charge conservation when a charged capacitor is connected across uncharged series capacitors.

Show solution
  1. With S1S_1 closed and S2S_2 open, only C3C_3 is across the cell: Q0=C3V0=1×8=8 μCQ_0 = C_3V_0 = 1 \times 8 = 8\ \mu\text{C}.
  2. After switching, C3C_3 is connected across the series pair C1C_1 (ϵr μ\epsilon_r\ \muF) and C2C_2 (1 μ\muF), which starts uncharged. The series capacitance is Cs=ϵr1+ϵr μC_s = \dfrac{\epsilon_r}{1 + \epsilon_r}\ \muF.
  3. At equilibrium both branches have the same voltage. Q3=5 μQ_3 = 5\ \muC gives V=5V = 5 V, and charge conservation leaves 8−5=3 μ8 - 5 = 3\ \muC on the series branch.

    Why: The charge on C3 is shared only with the series branch; the cell is disconnected.

  4. Cs=35=0.6 μC_s = \dfrac{3}{5} = 0.6\ \muF, so ϵr1+ϵr=0.6⇒ϵr=1.5\dfrac{\epsilon_r}{1 + \epsilon_r} = 0.6 \Rightarrow \epsilon_r = 1.5.
AnswerAnswer: 1.50
Ask about this question
Q12

Physics, Question 12 (3 marks)

Motion of a charge in a magnetic field · +3
In the xyxy-plane, the region y>0y > 0 has a uniform magnetic field B1k^B_1\hat{k} and the region y<0y < 0 has another uniform magnetic field B2k^B_2\hat{k}. A positively charged particle is projected from the origin along the positive yy-axis with speed v0=π m s−1v_0 = \pi\ \text{m s}^{-1} at t=0t = 0, as shown in the figure. Neglect gravity in this problem. Let t=Tt = T be the time when the particle crosses the xx-axis from below for the first time. If B2=4B1B_2 = 4B_1, the average speed of the particle, in m s−1\text{m s}^{-1}, along the xx-axis in the time interval TT is ______. (The figure shows the upper half-plane marked B1B_1, the lower half-plane marked B2B_2, and the particle at the origin with its velocity v0v_0 along +y+y.)

Tests: Join two semicircles of different radii and find distance travelled along x over the total time.

Show solution
  1. At the start F⃗=qv0j^×B1k^=qv0B1 i^\vec{F} = q v_0\hat{j} \times B_1\hat{k} = qv_0B_1\,\hat{i}, so the particle curves towards +x+x. It makes a semicircle of radius r1=mv0qB1r_1 = \dfrac{mv_0}{qB_1} and returns to the xx-axis at x=2r1x = 2r_1, moving along −y-y, after t1=πmqB1t_1 = \dfrac{\pi m}{qB_1}.
  2. Below the axis the velocity is along −j^-\hat{j}, so the force is along −i^-\hat{i}: a semicircle of radius r2=mv0qB2=r14r_2 = \dfrac{mv_0}{qB_2} = \dfrac{r_1}{4}, taking t2=πmqB2=t14t_2 = \dfrac{\pi m}{qB_2} = \dfrac{t_1}{4}. It crosses the axis from below at x=2r1−2r2x = 2r_1 - 2r_2.
  3. T=t1+t2=54⋅πmqB1T = t_1 + t_2 = \dfrac54 \cdot \dfrac{\pi m}{qB_1}. Along xx the particle moves 2r12r_1 forward, then 2r22r_2 back, a distance 2r1+2r2=52⋅mv0qB12r_1 + 2r_2 = \dfrac52 \cdot \dfrac{mv_0}{qB_1}.

    Why: On each semicircle x changes in one direction only, so the distance along x is the sum of the two diameters.

  4. Average speed along xx =(5/2) mv0/(qB1)(5/4) πm/(qB1)=2v0π=2ππ=2= \dfrac{(5/2)\,mv_0/(qB_1)}{(5/4)\,\pi m/(qB_1)} = \dfrac{2v_0}{\pi} = \dfrac{2\pi}{\pi} = 2 m/s.
  5. For comparison, the average xx-velocity (displacement 2r1−2r2=32r12r_1 - 2r_2 = \tfrac32 r_1 over TT) would be 6v05π=1.2\dfrac{6v_0}{5\pi} = 1.2 m/s; the question asks for speed, so 2.00.
AnswerAnswer: 2.00 m/s
Ask about this question
Q13

Physics, Question 13 (3 marks)

Ray optics (convex lens, intensity) · +3
Sunlight of intensity 1.3 kW m−21.3\ \text{kW m}^{-2} is incident normally on a thin convex lens of focal length 20 cm. Ignore the energy loss of light due to the lens and assume that the lens aperture size is much smaller than its focal length. The average intensity of light, in kW m−2\text{kW m}^{-2}, at a distance 22 cm from the lens on the other side is ______.

Tests: Find the beam's cross-section beyond the focus by similar triangles and conserve power.

Show solution
  1. Parallel sunlight converges to the focus at 20 cm and then spreads out again as a cone. At 22 cm the beam is 2 cm past the focus.
  2. By similar triangles, the beam radius there is r′=r×220=r10r' = r \times \dfrac{2}{20} = \dfrac{r}{10}, where rr is the lens aperture radius.
  3. The whole power through the lens passes through this smaller disc, so the intensity rises by (rr′)2=100\left(\dfrac{r}{r'}\right)^2 = 100.
  4. I=1.3×100=130 kW m−2I = 1.3 \times 100 = 130\ \text{kW m}^{-2}.
AnswerAnswer: 130.00 kW m−2\text{kW m}^{-2}
Ask about this question
Q14

Physics, Question 14 (3 marks)

Heat conduction (rods in series) · +3
Two conducting cylinders of equal length but different radii are connected in series between two heat baths kept at temperatures T1=300T_1 = 300 K and T2=100T_2 = 100 K, as shown in the figure. The radius of the bigger cylinder is twice that of the smaller one and the thermal conductivities of the materials of the smaller and the larger cylinders are K1K_1 and K2K_2 respectively. If the temperature at the junction of the two cylinders in the steady state is 200 K, then K1/K2K_1/K_2 = ______. (The figure shows the bath T1T_1 on the left, then the thinner cylinder K1K_1 of length LL, then the thicker cylinder K2K_2 of length LL, then the bath T2T_2 on the right, with insulating material around the cylinders.)

Tests: Equate heat currents KAΔT/L through series conductors.

Show solution
  1. In the steady state the same heat current flows through both cylinders (insulated sides, series connection).
  2. K1πr2(300−200)L=K2π(2r)2(200−100)L\dfrac{K_1 \pi r^2 (300 - 200)}{L} = \dfrac{K_2 \pi (2r)^2 (200 - 100)}{L}.
  3. Both temperature drops are 100 K, so K1r2=4K2r2⇒K1K2=4K_1 r^2 = 4K_2 r^2 \Rightarrow \dfrac{K_1}{K_2} = 4.
AnswerAnswer: 4.00
Ask about this question

Physics, Section 3: 2 paragraphs with 2 questions each, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Physics, Question 15 (3 marks)

Dimensional analysis (electromagnetism) · +3 / −1
Paragraph "X": In electromagnetic theory, the electric and magnetic phenomena are related to each other. Therefore, the dimensions of electric and magnetic quantities must also be related to each other. In the questions below, [E][E] and [B][B] stand for dimensions of electric and magnetic fields respectively, while [ϵ0][\epsilon_0] and [μ0][\mu_0] stand for dimensions of the permittivity and permeability of free space respectively. [L][L] and [T][T] are dimensions of length and time respectively. All the quantities are given in SI units.

Question: The relation between [E][E] and [B][B] is
  1. (A)[E]=[B] [L] [T][E] = [B]\,[L]\,[T]
  2. (B)[E]=[B] [L]−1 [T][E] = [B]\,[L]^{-1}\,[T]
  3. (C)[E]=[B] [L] [T]−1[E] = [B]\,[L]\,[T]^{-1}
  4. (D)[E]=[B] [L]−1 [T]−1[E] = [B]\,[L]^{-1}\,[T]^{-1}

Tests: Relate E and B through a velocity (F = qE = qvB, or E = cB).

Show solution
  1. The Lorentz force F⃗=q(E⃗+v⃗×B⃗)\vec{F} = q(\vec{E} + \vec{v} \times \vec{B}) adds EE and vBvB, so they have the same dimensions: [E]=[B][v][E] = [B][v].
  2. [v]=[L][T]−1[v] = [L][T]^{-1}, so [E]=[B] [L] [T]−1[E] = [B]\,[L]\,[T]^{-1}. (In an EM wave, E=cBE = cB says the same.)
AnswerAnswer: (C) [E]=[B] [L] [T]−1[E] = [B]\,[L]\,[T]^{-1}
Ask about this question
Q16

Physics, Question 16 (3 marks)

Dimensional analysis (electromagnetism) · +3 / −1
Paragraph "X": In electromagnetic theory, the electric and magnetic phenomena are related to each other. Therefore, the dimensions of electric and magnetic quantities must also be related to each other. In the questions below, [E][E] and [B][B] stand for dimensions of electric and magnetic fields respectively, while [ϵ0][\epsilon_0] and [μ0][\mu_0] stand for dimensions of the permittivity and permeability of free space respectively. [L][L] and [T][T] are dimensions of length and time respectively. All the quantities are given in SI units.

Question: The relation between [ϵ0][\epsilon_0] and [μ0][\mu_0] is
  1. (A)[μ0]=[ϵ0] [L]2 [T]−2[\mu_0] = [\epsilon_0]\,[L]^2\,[T]^{-2}
  2. (B)[μ0]=[ϵ0] [L]−2 [T]2[\mu_0] = [\epsilon_0]\,[L]^{-2}\,[T]^2
  3. (C)[μ0]=[ϵ0]−1 [L]2 [T]−2[\mu_0] = [\epsilon_0]^{-1}\,[L]^2\,[T]^{-2}
  4. (D)[μ0]=[ϵ0]−1 [L]−2 [T]2[\mu_0] = [\epsilon_0]^{-1}\,[L]^{-2}\,[T]^2

Tests: Use c = 1/√(μ0ε0) to relate the dimensions of μ0 and ε0.

Show solution
  1. The speed of light in vacuum is c=1μ0ϵ0c = \dfrac{1}{\sqrt{\mu_0\epsilon_0}}, so [μ0][ϵ0]=[c]−2=[L]−2[T]2[\mu_0][\epsilon_0] = [c]^{-2} = [L]^{-2}[T]^2.
  2. [μ0]=[ϵ0]−1 [L]−2 [T]2[\mu_0] = [\epsilon_0]^{-1}\,[L]^{-2}\,[T]^2.
AnswerAnswer: (D) [μ0]=[ϵ0]−1 [L]−2 [T]2[\mu_0] = [\epsilon_0]^{-1}\,[L]^{-2}\,[T]^2
Ask about this question
Q17

Physics, Question 17 (3 marks)

Errors in measurement · +3 / −1
Paragraph "A": If the measurement errors in all the independent quantities are known, then it is possible to determine the error in any dependent quantity. This is done by the use of series expansion and truncating the expansion at the first power of the error. For example, consider the relation z=x/yz = x/y. If the errors in xx, yy and zz are Δx\Delta x, Δy\Delta y and Δz\Delta z, respectively, then z±Δz=x±Δxy±Δy=xy(1±Δxx)(1±Δyy)−1z \pm \Delta z = \dfrac{x \pm \Delta x}{y \pm \Delta y} = \dfrac{x}{y}\left(1 \pm \dfrac{\Delta x}{x}\right)\left(1 \pm \dfrac{\Delta y}{y}\right)^{-1}. The series expansion for (1±Δyy)−1\left(1 \pm \dfrac{\Delta y}{y}\right)^{-1}, to first power in Δy/y\Delta y/y, is 1∓(Δy/y)1 \mp (\Delta y/y). The relative errors in independent variables are always added. So the error in zz will be Δz=z(Δxx+Δyy)\Delta z = z\left(\dfrac{\Delta x}{x} + \dfrac{\Delta y}{y}\right). The above derivation makes the assumption that Δx/x≪1\Delta x/x \ll 1, Δy/y≪1\Delta y/y \ll 1. Therefore, the higher powers of these quantities are neglected.

Question: Consider the ratio r=(1−a)(1+a)r = \dfrac{(1 - a)}{(1 + a)} to be determined by measuring a dimensionless quantity aa. If the error in the measurement of aa is Δa\Delta a (Δa/a≪1\Delta a/a \ll 1), then what is the error Δr\Delta r in determining rr?
  1. (A)Δa(1+a)2\dfrac{\Delta a}{(1 + a)^2}
  2. (B)2Δa(1+a)2\dfrac{2\Delta a}{(1 + a)^2}
  3. (C)2Δa(1−a2)\dfrac{2\Delta a}{(1 - a^2)}
  4. (D)2aΔa(1−a2)\dfrac{2a\Delta a}{(1 - a^2)}

Tests: Propagate an error to first order through a ratio where the same variable appears twice.

Show solution
  1. Both numerator and denominator contain the same aa, so expand directly (the errors are not independent): r±Δr=1−a∓Δa1+a±Δar \pm \Delta r = \dfrac{1 - a \mp \Delta a}{1 + a \pm \Delta a}.

    Why: Adding the relative errors of 1 − a and 1 + a as if independent would overstate the error; here a higher a lowers the numerator and raises the denominator together, so the first-order changes add exactly as the derivative gives.

  2. To first order, Δr=∣drda∣Δa\Delta r = \left|\dfrac{dr}{da}\right|\Delta a, with drda=−(1+a)−(1−a)(1+a)2=−2(1+a)2\dfrac{dr}{da} = \dfrac{-(1 + a) - (1 - a)}{(1 + a)^2} = -\dfrac{2}{(1 + a)^2}.
  3. Δr=2Δa(1+a)2\Delta r = \dfrac{2\Delta a}{(1 + a)^2}.
  4. Check with the paragraph's rule: Δrr=Δa1−a+Δa1+a=2Δa1−a2\dfrac{\Delta r}{r} = \dfrac{\Delta a}{1 - a} + \dfrac{\Delta a}{1 + a} = \dfrac{2\Delta a}{1 - a^2}, so Δr=1−a1+a⋅2Δa(1−a)(1+a)=2Δa(1+a)2\Delta r = \dfrac{1 - a}{1 + a} \cdot \dfrac{2\Delta a}{(1 - a)(1 + a)} = \dfrac{2\Delta a}{(1 + a)^2}, the same.

    Why: Option C is the relative error Δr/r, not Δr.

AnswerAnswer: (B) 2Δa(1+a)2\dfrac{2\Delta a}{(1 + a)^2}
Ask about this question
Q18

Physics, Question 18 (3 marks)

Errors in measurement (radioactive decay) · +3 / −1
Paragraph "A": If the measurement errors in all the independent quantities are known, then it is possible to determine the error in any dependent quantity. This is done by the use of series expansion and truncating the expansion at the first power of the error. For example, consider the relation z=x/yz = x/y. If the errors in xx, yy and zz are Δx\Delta x, Δy\Delta y and Δz\Delta z, respectively, then z±Δz=x±Δxy±Δy=xy(1±Δxx)(1±Δyy)−1z \pm \Delta z = \dfrac{x \pm \Delta x}{y \pm \Delta y} = \dfrac{x}{y}\left(1 \pm \dfrac{\Delta x}{x}\right)\left(1 \pm \dfrac{\Delta y}{y}\right)^{-1}. The series expansion for (1±Δyy)−1\left(1 \pm \dfrac{\Delta y}{y}\right)^{-1}, to first power in Δy/y\Delta y/y, is 1∓(Δy/y)1 \mp (\Delta y/y). The relative errors in independent variables are always added. So the error in zz will be Δz=z(Δxx+Δyy)\Delta z = z\left(\dfrac{\Delta x}{x} + \dfrac{\Delta y}{y}\right). The above derivation makes the assumption that Δx/x≪1\Delta x/x \ll 1, Δy/y≪1\Delta y/y \ll 1. Therefore, the higher powers of these quantities are neglected.

Question: In an experiment the initial number of radioactive nuclei is 3000. It is found that 1000±401000 \pm 40 nuclei decayed in the first 1.0 s. For ∣x∣≪1|x| \ll 1, ln⁡(1+x)=x\ln(1 + x) = x up to first power in xx. The error Δλ\Delta\lambda, in the determination of the decay constant λ\lambda, in s−1\text{s}^{-1}, is
  1. (A)0.04
  2. (B)0.03
  3. (C)0.02
  4. (D)0.01

Tests: Propagate the error in a count through ln(N0/N) to the decay constant.

Show solution
  1. Nuclei left after 1 s: N=3000−(1000±40)=2000∓40N = 3000 - (1000 \pm 40) = 2000 \mp 40. Decay law: N=N0e−λtN = N_0e^{-\lambda t}, so with t=1t = 1 s, λ=ln⁡N0N\lambda = \ln\dfrac{N_0}{N}.
  2. λ±Δλ=ln⁡30002000∓40=ln⁡32−ln⁡(1∓402000)\lambda \pm \Delta\lambda = \ln\dfrac{3000}{2000 \mp 40} = \ln\dfrac{3}{2} - \ln\left(1 \mp \dfrac{40}{2000}\right).
  3. With ln⁡(1+x)≈x\ln(1 + x) \approx x: ln⁡(1∓0.02)≈∓0.02\ln\left(1 \mp 0.02\right) \approx \mp 0.02, so Δλ=0.02 s−1\Delta\lambda = 0.02\ \text{s}^{-1}.
AnswerAnswer: (C) 0.02
Ask about this question

Chemistry, Section 1: 6 questions, one or more than one option correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct but only three are chosen; +2 if three or more options are correct but only two are chosen, both correct; +1 if two or more options are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Chemistry, Question 1 (4 marks)

Nitrogen compounds (thermal decomposition) · +4 / −2
The compound(s) which generate(s) N2\mathrm{N_2} gas upon thermal decomposition below 300∘C300^\circ\text{C} is (are)
  1. (A)NH4NO3\mathrm{NH_4NO_3}
  2. (B)(NH4)2Cr2O7\mathrm{(NH_4)_2Cr_2O_7}
  3. (C)Ba(N3)2\mathrm{Ba(N_3)_2}
  4. (D)Mg3N2\mathrm{Mg_3N_2}

Tests: Know which nitrogen compounds give N2 on mild heating.

Show solution
  1. (A) False. Below 300∘C300^\circ\text{C} ammonium nitrate gives nitrous oxide, not nitrogen: NH4NO3→N2O+2H2O\mathrm{NH_4NO_3 \rightarrow N_2O + 2H_2O}.

    Why: Only on strong heating above about 300 °C (or detonation) does it break down to N2, O2 and H2O.

  2. (B) True. Ammonium dichromate decomposes (around 180∘C180^\circ\text{C}, the "volcano" experiment): (NH4)2Cr2O7→N2+Cr2O3+4H2O\mathrm{(NH_4)_2Cr_2O_7 \rightarrow N_2 + Cr_2O_3 + 4H_2O}.

    Why: An internal redox: NH4+ nitrogen (−3) is oxidised to N2 (0) by Cr(VI).

  3. (C) True. Barium azide loses nitrogen on gentle heating (well below 300∘C300^\circ\text{C}): Ba(N3)2→Ba+3N2\mathrm{Ba(N_3)_2 \rightarrow Ba + 3N_2}.

    Why: Metal azides of Na and Ba are used to make very pure N2.

  4. (D) False. Mg3N2\mathrm{Mg_3N_2} is a thermally stable ionic nitride; it does not release N2\mathrm{N_2} below 300∘C300^\circ\text{C} (it gives NH3\mathrm{NH_3} only with water).
AnswerAnswer: (B), (C)
Ask about this question
Q2

Chemistry, Question 2 (4 marks)

Coordination compounds (metal carbonyls) · +4 / −2
The correct statement(s) regarding the binary transition metal carbonyl compounds is (are) (Atomic numbers: Fe = 26, Ni = 28)
  1. (A)Total number of valence shell electrons at metal centre in Fe(CO)5\mathrm{Fe(CO)_5} or Ni(CO)4\mathrm{Ni(CO)_4} is 16
  2. (B)These are predominantly low spin in nature
  3. (C)Metal–carbon bond strengthens when the oxidation state of the metal is lowered
  4. (D)The carbonyl C−O bond weakens when the oxidation state of the metal is increased

Tests: Apply synergic bonding and the 18-electron rule to metal carbonyls.

Show solution
  1. (A) False. Fe(0) has 8 valence electrons (3d64s23d^6 4s^2) and five CO donate 10: total 18. Ni(0) has 10 (3d84s23d^8 4s^2) and four CO donate 8: total 18. Both obey the 18-electron rule, not 16.
  2. (B) True. CO is a strong-field ligand (σ\sigma donor and π\pi acceptor), so electrons pair up; Fe(CO)5\mathrm{Fe(CO)_5} and Ni(CO)4\mathrm{Ni(CO)_4} are diamagnetic, low-spin complexes.
  3. (C) True. A lower oxidation state leaves more electron density on the metal, which it back-donates into the π∗\pi^* orbitals of CO. More back-bonding gives the M−C bond more double-bond character, so it strengthens.
  4. (D) False. Raising the oxidation state reduces back-donation into CO π∗\pi^*, so the C−O bond order rises and the C−O bond strengthens (higher νCO\nu_\text{CO}), not weakens.

    Why: M−C and C−O bond strengths move in opposite directions with back-bonding.

AnswerAnswer: (B), (C)
Ask about this question
Q3

Chemistry, Question 3 (4 marks)

p-Block elements (group 15) · +4 / −2
Based on the compounds of group 15 elements, the correct statement(s) is (are)
  1. (A)Bi2O5\mathrm{Bi_2O_5} is more basic than N2O5\mathrm{N_2O_5}
  2. (B)NF3\mathrm{NF_3} is more covalent than BiF3\mathrm{BiF_3}
  3. (C)PH3\mathrm{PH_3} boils at lower temperature than NH3\mathrm{NH_3}
  4. (D)The N−N single bond is stronger than the P−P single bond

Tests: Use group 15 trends: oxide character, covalency, hydrogen bonding and bond strength.

Show solution
  1. (A) True. Metallic character rises down the group, so oxides become less acidic and more basic. N2O5\mathrm{N_2O_5} is strongly acidic; Bi, a metal, gives a far less acidic (more basic) oxide.
  2. (B) True. N is small and highly electronegative, close to F, so NF3\mathrm{NF_3} is a covalent molecule. Bi is large and electropositive, so BiF3\mathrm{BiF_3} is largely ionic.

    Why: Fajans: a large, low-electronegativity cation forms the more ionic fluoride.

  3. (C) True. NH3\mathrm{NH_3} molecules are hydrogen bonded; PH3\mathrm{PH_3} molecules are not. So NH3\mathrm{NH_3} boils at about 240 K and PH3\mathrm{PH_3} at about 185 K.
  4. (D) False. The N−N single bond is weaker than P−P: the N atoms are so small that the lone pairs on adjacent N atoms repel strongly (about 160 vs 200 kJ mol−1\mathrm{mol^{-1}}).

    Why: Same reason the F−F bond is weaker than Cl−Cl.

AnswerAnswer: (A), (B), (C)
Ask about this question
Q4

Chemistry, Question 4 (4 marks)

Stereochemistry of SN2 reactions · +4 / −2
In the following reaction sequence, the correct structure(s) of X is (are): X is treated with 1) PBr3,Et2O\mathrm{PBr_3, Et_2O}; 2) NaI,Me2CO\mathrm{NaI, Me_2CO}; 3) NaN3,HCONMe2\mathrm{NaN_3, HCONMe_2} to give an enantiomerically pure azide. (The figure draws the product as a cyclopentane ring, apex up, with Me on the upper-left ring carbon on a wedge and N3\mathrm{N_3} on the upper-right ring carbon on a hashed bond: trans-1-azido-3-methylcyclopentane, the 1,3-carbons flanking the apex carbon. In the options, "same orientation" means the ring drawn exactly like the product; "flipped" means the ring drawn upside down, flat edge on top, with Me on the left carbon and OH on the right carbon flanking the bottom apex.)
  1. (A)3-Methylcyclopentanol in the same orientation as the product: Me on a wedge, OH on a hashed bond (trans)
  2. (B)3-Methylcyclopentanol in the same orientation as the product: Me on a wedge, OH on a wedge (cis)
  3. (C)3-Methylcyclopentanol with the ring flipped: Me on a wedge, OH on a hashed bond (trans)
  4. (D)3-Methylcyclopentanol with the ring flipped: Me on a wedge, OH on a wedge (cis)

Tests: Track configuration through a sequence of SN2 substitutions.

Show solution
  1. Count the inversions at the carbon that carries OH in X. Step 1: PBr3\mathrm{PBr_3} converts R−OH\mathrm{R{-}OH} to R−Br\mathrm{R{-}Br} by SN2\mathrm{S_N2}, inversion. Step 2: NaI in acetone (Finkelstein) swaps Br for I by SN2\mathrm{S_N2}, inversion. Step 3: NaN3\mathrm{NaN_3} in DMF swaps I for N3\mathrm{N_3} by SN2\mathrm{S_N2}, inversion.
  2. Three inversions = net inversion. The methyl-bearing carbon is never touched, so its configuration is unchanged.

    Why: Two inversions cancel; the third leaves the opposite configuration.

  3. In the product N3\mathrm{N_3} is hashed, so in X the OH must be on a wedge, drawn on the same carbon, with Me still on a wedge in the same place: the cis alcohol drawn exactly like the product, option (B). In CIP terms the azide is (1R,3R) and X is (1S,3R)-3-methylcyclopentan-1-ol.
  4. (A) has OH hashed, i.e. the same configuration as the azide: that would need retention overall. (C) is the mirror image of (A).
  5. (D) looks cis too, but it is (B) reflected top to bottom in the plane of the paper: wedges stay wedges while the ring is mirrored, so (D) is the enantiomer of (B), (1R,3S). The product is enantiomerically pure, so only one enantiomer of X works: (B).

    Why: cis-3-Methylcyclopentanol has no internal mirror plane (Me differs from OH), so it is chiral.

AnswerAnswer: (B)
Ask about this question
Q5

Chemistry, Question 5 (4 marks)

Hydrocarbons (preparation of arenes) · +4 / −2
The reaction(s) leading to the formation of 1,3,5-trimethylbenzene is (are)
  1. (A)Acetone, (CH3)2CO\mathrm{(CH_3)_2CO}, heated with conc. H2SO4\mathrm{H_2SO_4} (Δ\Delta)
  2. (B)Propyne, Me−C≡C−H\mathrm{Me{-}C{\equiv}C{-}H}, passed through a heated iron tube at 873 K
  3. (C)1,3,5-Triacetylbenzene treated with 1) Br2\mathrm{Br_2}, NaOH; 2) H3O+\mathrm{H_3O^+}; 3) sodalime, Δ\Delta
  4. (D)Benzene-1,3,5-tricarbaldehyde (three CHO groups at 1, 3, 5) treated with Zn/Hg, HCl

Tests: Recognise routes to mesitylene and what haloform, decarboxylation and Clemmensen do.

Show solution
  1. (A) True. Conc. H2SO4\mathrm{H_2SO_4} condenses three acetone molecules (aldol-type condensations, losing three H2O\mathrm{H_2O}) into mesitylene: 3 (CH3)2CO→C6H3(CH3)3+3H2O\mathrm{3\,(CH_3)_2CO \rightarrow C_6H_3(CH_3)_3 + 3H_2O}.
  2. (B) True. Like acetylene giving benzene, propyne cyclotrimerises in a red-hot iron tube at 873 K; the head-to-tail trimer is 1,3,5-trimethylbenzene.
  3. (C) False. The haloform reaction (Br2\mathrm{Br_2}/NaOH) turns each COCH3\mathrm{COCH_3} into COO−\mathrm{COO^-}; acidification gives benzene-1,3,5-tricarboxylic acid; sodalime removes all three CO2\mathrm{CO_2}, giving benzene, not mesitylene.
  4. (D) True. Clemmensen reduction converts each CHO into CH3\mathrm{CH_3}: benzene-1,3,5-tricarbaldehyde →\rightarrow 1,3,5-trimethylbenzene.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

Thermodynamics (cyclic process) · +4 / −2
A reversible cyclic process for an ideal gas is shown below. Here, PP, VV, and TT are pressure, volume and temperature, respectively. The thermodynamic parameters qq, ww, HH and UU are heat, work, enthalpy and internal energy, respectively. (The figure is a plot of volume VV against temperature TT: A (P1,V1,T1)(P_1, V_1, T_1) at top left, C (P2,V1,T2)(P_2, V_1, T_2) at top right joined to A by a horizontal line, B (P2,V2,T1)(P_2, V_2, T_1) directly below A joined to A by a vertical line, and a straight line from B up to C.) The correct option(s) is (are)
  1. (A)qAC=ΔUBCq_{AC} = \Delta U_{BC} and wAB=P2(V2−V1)w_{AB} = P_2(V_2 - V_1)
  2. (B)wBC=P2(V2−V1)w_{BC} = P_2(V_2 - V_1) and qBC=ΔHACq_{BC} = \Delta H_{AC}
  3. (C)ΔHCA<ΔUCA\Delta H_{CA} < \Delta U_{CA} and qAC=ΔUBCq_{AC} = \Delta U_{BC}
  4. (D)qBC=ΔHACq_{BC} = \Delta H_{AC} and ΔHCA>ΔUCA\Delta H_{CA} > \Delta U_{CA}

Tests: Read a V–T cycle and evaluate q, w, ΔU and ΔH on each path of an ideal gas.

Show solution
  1. Identify the paths. A→\rightarrowB: T=T1T = T_1 fixed, isothermal (V1→V2V_1 \rightarrow V_2, V2<V1V_2 < V_1). B→\rightarrowC: both at P2P_2, straight line V∝TV \propto T, isobaric. C→\rightarrowA (or A→\rightarrowC): V=V1V = V_1 fixed, isochoric.
  2. Isochoric A→\rightarrowC: w=0w = 0, so qAC=ΔUAC=nCV(T2−T1)q_{AC} = \Delta U_{AC} = nC_V(T_2 - T_1). And ΔUBC=nCV(T2−T1)\Delta U_{BC} = nC_V(T_2 - T_1) since B is at T1T_1. So qAC=ΔUBCq_{AC} = \Delta U_{BC} is true.
  3. (A) False. Its second half fails: A→\rightarrowB is a reversible isothermal, wAB=−nRT1ln⁡V2V1w_{AB} = -nRT_1\ln\dfrac{V_2}{V_1}, not P2(V2−V1)P_2(V_2 - V_1).
  4. (B) True. B→\rightarrowC at constant P2P_2 with w=−PΔVw = -P\Delta V (work done on the gas): wBC=−P2(V1−V2)=P2(V2−V1)w_{BC} = -P_2(V_1 - V_2) = P_2(V_2 - V_1). Also qBC=ΔHBC=nCP(T2−T1)=ΔHACq_{BC} = \Delta H_{BC} = nC_P(T_2 - T_1) = \Delta H_{AC}.

    Why: Enthalpy of an ideal gas depends only on T, and A, B are both at T1.

  5. C→\rightarrowA: T2→T1T_2 \rightarrow T_1 with T2>T1T_2 > T_1 (C is at the same volume, higher temperature). ΔHCA=nCP(T1−T2)\Delta H_{CA} = nC_P(T_1 - T_2) and ΔUCA=nCV(T1−T2)\Delta U_{CA} = nC_V(T_1 - T_2) are both negative, and CP>CVC_P > C_V, so ΔHCA\Delta H_{CA} is more negative: ΔHCA<ΔUCA\Delta H_{CA} < \Delta U_{CA}.
  6. (C) True (both halves shown above). (D) False: qBC=ΔHACq_{BC} = \Delta H_{AC} holds, but ΔHCA>ΔUCA\Delta H_{CA} > \Delta U_{CA} does not.
AnswerAnswer: (B), (C)
Ask about this question

Chemistry, Section 2: 8 questions, the answer is a numerical value (truncated or rounded off to the second decimal place): +3 if only the correct numerical value is entered, 0 in all other cases

Q7

Chemistry, Question 7 (3 marks)

Magnetic properties (diamagnetic species) · +3
Among the species given below, the total number of diamagnetic species is ___. H atom, NO2\mathrm{NO_2} monomer, O2−\mathrm{O_2^-} (superoxide), dimeric sulphur in vapour phase, Mn3O4\mathrm{Mn_3O_4}, (NH4)2[FeCl4]\mathrm{(NH_4)_2[FeCl_4]}, (NH4)2[NiCl4]\mathrm{(NH_4)_2[NiCl_4]}, K2MnO4\mathrm{K_2MnO_4}, K2CrO4\mathrm{K_2CrO_4}

Tests: Count unpaired electrons from oxidation states, MO configurations and ligand field.

Show solution
  1. H atom (1s11s^1), NO2\mathrm{NO_2} (17 valence electrons, odd) and O2−\mathrm{O_2^-} (one unpaired electron in π∗\pi^*) all have an unpaired electron: paramagnetic.
  2. S2\mathrm{S_2} vapour is like O2\mathrm{O_2}: two unpaired electrons in the degenerate π∗\pi^* orbitals, paramagnetic.
  3. Mn3O4=MnIIMn2IIIO4\mathrm{Mn_3O_4} = \mathrm{Mn^{II}Mn^{III}_2O_4}: Mn2+\mathrm{Mn^{2+}} (d5d^5) and Mn3+\mathrm{Mn^{3+}} (d4d^4), paramagnetic.
  4. [FeCl4]2−\mathrm{[FeCl_4]^{2-}}: Fe2+\mathrm{Fe^{2+}}, d6d^6, tetrahedral with weak-field Cl−\mathrm{Cl^-}, 4 unpaired. [NiCl4]2−\mathrm{[NiCl_4]^{2-}}: Ni2+\mathrm{Ni^{2+}}, d8d^8, tetrahedral, 2 unpaired. Both paramagnetic.
  5. K2MnO4\mathrm{K_2MnO_4}: Mn(VI), d1d^1, paramagnetic. K2CrO4\mathrm{K_2CrO_4}: Cr(VI), d0d^0, diamagnetic.
  6. Only K2CrO4\mathrm{K_2CrO_4} is diamagnetic: count = 1.
AnswerAnswer: 1
Ask about this question
Q8

Chemistry, Question 8 (3 marks)

Mole concept (stoichiometry) · +3
The ammonia prepared by treating ammonium sulphate with calcium hydroxide is completely used by NiCl2.6H2O\mathrm{NiCl_2.6H_2O} to form a stable coordination compound. Assume that both the reactions are 100% complete. If 1584 g of ammonium sulphate and 952 g of NiCl2.6H2O\mathrm{NiCl_2.6H_2O} are used in the preparation, the combined weight (in grams) of gypsum and the nickel-ammonia coordination compound thus produced is ____. (Atomic weights in g mol−1\mathrm{mol^{-1}}: H = 1, N = 14, O = 16, S = 32, Cl = 35.5, Ca = 40, Ni = 59)

Tests: Chain two reactions by mole ratio and find product masses.

Show solution
  1. (NH4)2SO4+Ca(OH)2→CaSO4⋅2H2O+2NH3\mathrm{(NH_4)_2SO_4 + Ca(OH)_2 \rightarrow CaSO_4{\cdot}2H_2O + 2NH_3}. Molar mass of (NH4)2SO4=132\mathrm{(NH_4)_2SO_4} = 132, so 1584/132=121584/132 = 12 mol.
  2. This gives 12 mol gypsum (CaSO4⋅2H2O\mathrm{CaSO_4{\cdot}2H_2O}, M=40+32+64+36=172M = 40 + 32 + 64 + 36 = 172): 12×172=206412 \times 172 = 2064 g, and 2424 mol NH3\mathrm{NH_3}.
  3. NiCl2⋅6H2O\mathrm{NiCl_2{\cdot}6H_2O}: M=59+71+108=238M = 59 + 71 + 108 = 238, so 952/238=4952/238 = 4 mol. The stable complex is [Ni(NH3)6]Cl2\mathrm{[Ni(NH_3)_6]Cl_2}: NiCl2⋅6H2O+6NH3→[Ni(NH3)6]Cl2+6H2O\mathrm{NiCl_2{\cdot}6H_2O + 6NH_3 \rightarrow [Ni(NH_3)_6]Cl_2 + 6H_2O}.

    Why: 4 mol Ni needs 6 × 4 = 24 mol NH3, exactly what was made: the data are matched.

  4. M [Ni(NH3)6]Cl2=59+6×17+71=232M\,[\mathrm{Ni(NH_3)_6]Cl_2} = 59 + 6 \times 17 + 71 = 232, so 4×232=9284 \times 232 = 928 g.
  5. Combined mass =2064+928=2992= 2064 + 928 = 2992 g.
AnswerAnswer: 2992
Ask about this question
Q9

Chemistry, Question 9 (3 marks)

Solid state (unit cell counting) · +3
Consider an ionic solid MX with NaCl structure. Construct a new structure (Z) whose unit cell is constructed from the unit cell of MX following the sequential instructions given below. Neglect the charge balance. (i) Remove all the anions (X) except the central one (ii) Replace all the face centered cations (M) by anions (X) (iii) Remove all the corner cations (M) (iv) Replace the central anion (X) with cation (M). The value of (number of anionsnumber of cations)\left(\dfrac{\text{number of anions}}{\text{number of cations}}\right) in Z is ____.

Tests: Count ions per unit cell using corner, edge, face and body contributions.

Show solution
  1. In this NaCl cell, M is at the corners (8×18=18 \times \tfrac18 = 1) and face centres (6×12=36 \times \tfrac12 = 3); X is at the edge centres (12×14=312 \times \tfrac14 = 3) and body centre (1).

    Why: The question calls the body-centre site the central anion, so X occupies the octahedral voids here.

  2. (i) Keep only the central X: X = 1. (ii) The 6 face-centre M become X: X =1+6×12=4= 1 + 6 \times \tfrac12 = 4; M = 1 (corners).
  3. (iii) Remove the corner M: M = 0. (iv) The central X becomes M: X =3= 3, M =1= 1.
  4. Ratio =3/1=3= 3/1 = 3.
AnswerAnswer: 3
Ask about this question
Q10

Chemistry, Question 10 (3 marks)

Electrochemistry (Nernst equation) · +3
For the electrochemical cell, Mg(s) ∣ Mg2+(aq,1 M) ∣∣ Cu2+(aq,1 M) ∣ Cu(s)\mathrm{Mg(s)\,|\,Mg^{2+}(aq, 1\,M)\,||\,Cu^{2+}(aq, 1\,M)\,|\,Cu(s)} the standard emf of the cell is 2.70 V at 300 K. When the concentration of Mg2+\mathrm{Mg^{2+}} is changed to xx M, the cell potential changes to 2.67 V at 300 K. The value of xx is ____. (given, FR=11500 K V−1\dfrac{F}{R} = 11500\ \mathrm{K\,V^{-1}}, where FF is the Faraday constant and RR is the gas constant, ln⁡(10)=2.30\ln(10) = 2.30)

Tests: Use the Nernst equation to find an ion concentration from the cell emf.

Show solution
  1. Cell reaction: Mg+Cu2+→Mg2++Cu\mathrm{Mg + Cu^{2+} \rightarrow Mg^{2+} + Cu}, n=2n = 2, Q=[Mg2+][Cu2+]=xQ = \dfrac{[\mathrm{Mg^{2+}}]}{[\mathrm{Cu^{2+}}]} = x.
  2. Nernst: E=E∘−RTnFln⁡x⇒2.67=2.70−3002×11500ln⁡xE = E^\circ - \dfrac{RT}{nF}\ln x \Rightarrow 2.67 = 2.70 - \dfrac{300}{2 \times 11500}\ln x.
  3. ln⁡x=0.03×23000300=0.03×76.67=2.30\ln x = 0.03 \times \dfrac{23000}{300} = 0.03 \times 76.67 = 2.30.
  4. ln⁡x=2.30=ln⁡10\ln x = 2.30 = \ln 10, so x=10x = 10.
AnswerAnswer: 10
Ask about this question
Q11

Chemistry, Question 11 (3 marks)

Gaseous state (ideal gas equilibrium) · +3
A closed tank has two compartments A and B, both filled with oxygen (assumed to be ideal gas). The partition separating the two compartments is fixed and is a perfect heat insulator (Figure 1). If the old partition is replaced by a new partition which can slide and conduct heat but does NOT allow the gas to leak across (Figure 2), the volume (in m3\mathrm{m^3}) of the compartment A after the system attains equilibrium is ____. (Figure 1: compartment A holds 1 m3\mathrm{m^3} at 5 bar and 400 K; compartment B holds 3 m3\mathrm{m^3} at 1 bar and 300 K. Figure 2: the same tank with a movable partition between A and B.)

Tests: Use equal T and P at equilibrium to split volume in proportion to moles.

Show solution
  1. Moles in each compartment, n=PV/RTn = PV/RT: nA∝5×1400=180n_A \propto \dfrac{5 \times 1}{400} = \dfrac{1}{80} and nB∝1×3300=1100n_B \propto \dfrac{1 \times 3}{300} = \dfrac{1}{100}, so nA:nB=5:4n_A : n_B = 5 : 4.
  2. At equilibrium the conducting, sliding partition makes TT and PP equal on both sides, so V=nRT/PV = nRT/P is proportional to nn.

    Why: The final common temperature is not needed for the volume split.

  3. Total volume 4 m3\mathrm{m^3}: VA=4×59=2.222 m3V_A = 4 \times \dfrac{5}{9} = 2.222\ \mathrm{m^3}.
  4. Check: energy conservation gives T=5×400+4×3009=355.6T = \dfrac{5 \times 400 + 4 \times 300}{9} = 355.6 K and then P=2P = 2 bar on both sides; VA=2.22 m3V_A = 2.22\ \mathrm{m^3}, VB=1.78 m3V_B = 1.78\ \mathrm{m^3}.
AnswerAnswer: 2.22
Ask about this question
Q12

Chemistry, Question 12 (3 marks)

Solutions (Raoult's law) · +3
Liquids A and B form ideal solution over the entire range of composition. At temperature T, equimolar binary solution of liquids A and B has vapour pressure 45 Torr. At the same temperature, a new solution of A and B having mole fractions xAx_A and xBx_B, respectively, has vapour pressure of 22.5 Torr. The value of xA/xBx_A/x_B in the new solution is ____. (given that the vapour pressure of pure liquid A is 20 Torr at temperature T)

Tests: Apply Raoult's law to find a pure-component vapour pressure and a composition.

Show solution
  1. Raoult's law for the equimolar solution: 45=0.5×20+0.5 pB∘⇒pB∘=7045 = 0.5 \times 20 + 0.5\,p_B^\circ \Rightarrow p_B^\circ = 70 Torr.
  2. New solution: 22.5=20xA+70(1−xA)=70−50xA⇒xA=0.9522.5 = 20x_A + 70(1 - x_A) = 70 - 50x_A \Rightarrow x_A = 0.95.
  3. xB=0.05x_B = 0.05, so xA/xB=0.95/0.05=19x_A/x_B = 0.95/0.05 = 19.
AnswerAnswer: 19
Ask about this question
Q13

Chemistry, Question 13 (3 marks)

Ionic equilibrium (solubility of salt of weak acid) · +3
The solubility of a salt of weak acid (AB) at pH 3 is Y×10−3 mol L−1\mathbf{Y} \times 10^{-3}\ \mathrm{mol\,L^{-1}}. The value of Y is ____. (Given that the value of solubility product of AB (KspK_{sp}) = 2×10−102 \times 10^{-10} and the value of ionization constant of HB (KaK_a) = 1×10−81 \times 10^{-8})

Tests: Find the solubility of a salt whose anion is protonated in acid.

Show solution
  1. AB(s)⇌A++B−\mathrm{AB(s) \rightleftharpoons A^+ + B^-}; at pH 3, B−\mathrm{B^-} is largely protonated: B−+H+⇌HB\mathrm{B^- + H^+ \rightleftharpoons HB}.
  2. If ss is the solubility, [A+]=s=[B−]+[HB]=[B−](1+[H+]Ka)=[B−](1+105)[\mathrm{A^+}] = s = [\mathrm{B^-}] + [\mathrm{HB}] = [\mathrm{B^-}]\left(1 + \dfrac{[\mathrm{H^+}]}{K_a}\right) = [\mathrm{B^-}](1 + 10^{5}).

    Why: [HB] = [H+][B−]/Ka with [H+] = 10^−3.

  3. Ksp=[A+][B−]=s21+105⇒s2=2×10−10×100001≈2×10−5K_{sp} = [\mathrm{A^+}][\mathrm{B^-}] = \dfrac{s^2}{1 + 10^5} \Rightarrow s^2 = 2 \times 10^{-10} \times 100001 \approx 2 \times 10^{-5}.
  4. s=2×10−5=4.47×10−3 mol L−1s = \sqrt{2 \times 10^{-5}} = 4.47 \times 10^{-3}\ \mathrm{mol\,L^{-1}}, so Y=4.47Y = 4.47.
AnswerAnswer: 4.47
Ask about this question
Q14

Chemistry, Question 14 (3 marks)

Colligative properties (elevation of boiling point) · +3
The plot given below shows P−TP - T curves (where PP is the pressure and TT is the temperature) for two solvents X and Y and isomolal solutions of NaCl in these solvents. NaCl completely dissociates in both the solvents. (The figure shows vapour pressure (mmHg) against temperature (K) with a horizontal line at 760 mmHg. Curve 1, solvent X, reaches 760 mmHg at 360 K; curve 2, solution of NaCl in solvent X, at 362 K; curve 3, solvent Y, at 367 K; curve 4, solution of NaCl in solvent Y, at 368 K.) On addition of equal number of moles of a non-volatile solute S in equal amount (in kg) of these solvents, the elevation of boiling point of solvent X is three times that of solvent Y. Solute S is known to undergo dimerization in these solvents. If the degree of dimerization is 0.7 in solvent Y, the degree of dimerization in solvent X is ____.

Tests: Read Kb ratios from boiling-point data and apply the van 't Hoff factor for association.

Show solution
  1. From the graph, NaCl (i=2i = 2) at the same molality mm raises the boiling point of X by 362−360=2362 - 360 = 2 K and of Y by 368−367=1368 - 367 = 1 K. So 2KbXm=22K_b^X m = 2 and 2KbYm=12K_b^Y m = 1, giving KbX=2KbYK_b^X = 2K_b^Y.
  2. For dimerisation 2S⇌S2\mathrm{2S \rightleftharpoons S_2} with degree α\alpha: i=1−α+α2=1−α2i = 1 - \alpha + \dfrac{\alpha}{2} = 1 - \dfrac{\alpha}{2}. In Y: iY=1−0.35=0.65i_Y = 1 - 0.35 = 0.65.
  3. Same molality of S in both: ΔTX=3ΔTY⇒KbXiX=3KbYiY⇒2iX=3×0.65⇒iX=0.975\Delta T_X = 3\Delta T_Y \Rightarrow K_b^X i_X = 3K_b^Y i_Y \Rightarrow 2i_X = 3 \times 0.65 \Rightarrow i_X = 0.975.
  4. 1−αX2=0.975⇒αX=0.051 - \dfrac{\alpha_X}{2} = 0.975 \Rightarrow \alpha_X = 0.05.
AnswerAnswer: 0.05
Ask about this question

Chemistry, Section 3: 2 paragraphs with 2 questions each, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Chemistry, Question 15 (3 marks)

Aromatic carbonyl chemistry (Gattermann-Koch, Perkin) · +3 / −1
Paragraph "X": Treatment of benzene with CO/HCl in the presence of anhydrous AlCl3/CuCl\mathrm{AlCl_3/CuCl} followed by reaction with Ac2O/NaOAc\mathrm{Ac_2O/NaOAc} gives compound X as the major product. Compound X upon reaction with Br2/Na2CO3\mathrm{Br_2/Na_2CO_3}, followed by heating at 473 K with moist KOH furnishes Y as the major product. Reaction of X with H2/Pd-C\mathrm{H_2/Pd\text{-}C}, followed by H3PO4\mathrm{H_3PO_4} treatment gives Z as the major product. Question: The compound Y is
  1. (A)Cinnamoyl bromide, C6H5CH=CHCOBr\mathrm{C_6H_5CH{=}CHCOBr}
  2. (B)2-Bromo-3-hydroxy-3-phenylpropanoic acid, C6H5CH(OH)CH(Br)COOH\mathrm{C_6H_5CH(OH)CH(Br)COOH}
  3. (C)Phenylacetylene, C6H5C≡CH\mathrm{C_6H_5C{\equiv}CH}
  4. (D)2,3-Dibromo-3-phenylpropanoyl bromide, C6H5CHBrCHBrCOBr\mathrm{C_6H_5CHBrCHBrCOBr}

Tests: Follow benzene to cinnamic acid and then to phenylacetylene.

Show solution
  1. Gattermann-Koch: benzene + CO/HCl with AlCl3/CuCl\mathrm{AlCl_3/CuCl} gives benzaldehyde, C6H5CHO\mathrm{C_6H_5CHO}.
  2. Perkin reaction with Ac2O/NaOAc\mathrm{Ac_2O/NaOAc}: benzaldehyde →\rightarrow cinnamic acid, C6H5CH=CHCOOH\mathrm{C_6H_5CH{=}CHCOOH} = X.
  3. Br2/Na2CO3\mathrm{Br_2/Na_2CO_3}: Br2\mathrm{Br_2} adds to the C=C, and the carboxylate of the dibromo acid loses CO2\mathrm{CO_2} and Br−\mathrm{Br^-} together (decarboxylative elimination), giving β\beta-bromostyrene, C6H5CH=CHBr\mathrm{C_6H_5CH{=}CHBr}.
  4. Moist KOH at 473 K removes HBr (dehydrohalogenation of the vinyl bromide): Y = C6H5C≡CH\mathrm{C_6H_5C{\equiv}CH}, phenylacetylene, option (C).
AnswerAnswer: (C) phenylacetylene
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

Aromatic carbonyl chemistry (intramolecular Friedel-Crafts) · +3 / −1
Paragraph "X": Treatment of benzene with CO/HCl in the presence of anhydrous AlCl3/CuCl\mathrm{AlCl_3/CuCl} followed by reaction with Ac2O/NaOAc\mathrm{Ac_2O/NaOAc} gives compound X as the major product. Compound X upon reaction with Br2/Na2CO3\mathrm{Br_2/Na_2CO_3}, followed by heating at 473 K with moist KOH furnishes Y as the major product. Reaction of X with H2/Pd-C\mathrm{H_2/Pd\text{-}C}, followed by H3PO4\mathrm{H_3PO_4} treatment gives Z as the major product. Question: The compound Z is
  1. (A)1-Indanone (2,3-dihydro-1H-inden-1-one): benzene fused to a five-membered ring with a C=O next to the benzene ring and two CH2\mathrm{CH_2} groups
  2. (B)1H-Inden-1-one (indenone): the same fused ring with the C=O next to the benzene ring and a C=C in place of the two CH2\mathrm{CH_2} groups
  3. (C)3-Hydroxy-1-indanone: 1-indanone with an OH on the other benzylic carbon
  4. (D)Indane: benzene fused to a five-membered ring of three CH2\mathrm{CH_2} groups (no C=O)

Tests: Recognise selective alkene hydrogenation and intramolecular acylation.

Show solution
  1. X is cinnamic acid, C6H5CH=CHCOOH\mathrm{C_6H_5CH{=}CHCOOH} (Gattermann-Koch, then Perkin).
  2. H2/Pd-C\mathrm{H_2/Pd\text{-}C} reduces only the alkene C=C: 3-phenylpropanoic acid, C6H5CH2CH2COOH\mathrm{C_6H_5CH_2CH_2COOH}.

    Why: The aromatic ring and the COOH are not reduced under these conditions.

  3. H3PO4\mathrm{H_3PO_4} (polyphosphoric acid) protonates the acid to an acylium-type electrophile that attacks the ring ortho to the side chain: intramolecular Friedel-Crafts acylation closes a five-membered ring.
  4. Z = 1-indanone: the C=O attached to the benzene ring and two CH2\mathrm{CH_2} groups, option (A).
AnswerAnswer: (A) 1-indanone
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

Organic synthesis (aromatic acids, ibuprofen) · +3 / −1
Paragraph "A": An organic acid P (C11H12O2\mathrm{C_{11}H_{12}O_2}) can easily be oxidized to a dibasic acid which reacts with ethyleneglycol to produce a polymer dacron. Upon ozonolysis, P gives an aliphatic ketone as one of the products. P undergoes the following reaction sequences to furnish R via Q. The compound P also undergoes another set of reactions to produce S. (The scheme: P →\rightarrow Q with 1) H2/Pd-C\mathrm{H_2/Pd\text{-}C}, 2) SOCl2\mathrm{SOCl_2}, 3) MeMgBr,CdCl2\mathrm{MeMgBr, CdCl_2}, 4) NaBH4\mathrm{NaBH_4}; Q →\rightarrow R with 1) HCl, 2) Mg/Et2O\mathrm{Mg/Et_2O}, 3) CO2\mathrm{CO_2} (dry ice), 4) H3O+\mathrm{H_3O^+}; P →\rightarrow S with 1) H2/Pd-C\mathrm{H_2/Pd\text{-}C}, 2) NH3/Δ\mathrm{NH_3}/\Delta, 3) Br2/NaOH\mathrm{Br_2/NaOH}, 4) CHCl3,KOH,Δ\mathrm{CHCl_3, KOH}, \Delta, 5) H2/Pd-C\mathrm{H_2/Pd\text{-}C}.) Question: The compound R is
  1. (A)2-(4-Isobutylphenyl)propanoic acid (ibuprofen): CH3CH(COOH)\mathrm{CH_3CH(COOH)} and CH2CH(CH3)2\mathrm{CH_2CH(CH_3)_2} para on the benzene ring
  2. (B)3-(2-Isobutylphenyl)propanoic acid: CH2CH2COOH\mathrm{CH_2CH_2COOH} and CH2CH(CH3)2\mathrm{CH_2CH(CH_3)_2} ortho on the benzene ring
  3. (C)2-(4-sec-Butylphenyl)propanoic acid: CH3CH(COOH)\mathrm{CH_3CH(COOH)} and CH(CH3)CH2CH3\mathrm{CH(CH_3)CH_2CH_3} para on the benzene ring
  4. (D)2-(2-Isobutylphenyl)propanoic acid: CH3CH(COOH)\mathrm{CH_3CH(COOH)} and CH2CH(CH3)2\mathrm{CH_2CH(CH_3)_2} ortho on the benzene ring

Tests: Deduce P from oxidation and ozonolysis clues and follow a Grignard carboxylation route.

Show solution
  1. P is oxidised to a dibasic acid that makes dacron with ethylene glycol: terephthalic acid. So P is a para-disubstituted benzene with a COOH and one carbon side chain.
  2. C11H12O2\mathrm{C_{11}H_{12}O_2}: HOOC−C6H4−\mathrm{HOOC{-}C_6H_4{-}} accounts for C7H5O2\mathrm{C_7H_5O_2}, leaving C4H7\mathrm{C_4H_7} with one C=C (degree of unsaturation 6 = ring 4 + C=O 1 + C=C 1). Ozonolysis gives an aliphatic ketone (acetone), so the side chain is −CH=C(CH3)2\mathrm{{-}CH{=}C(CH_3)_2}. P = 4-(2-methylprop-1-enyl)benzoic acid.
  3. P →\rightarrow Q: H2/Pd-C\mathrm{H_2/Pd\text{-}C} gives 4-isobutylbenzoic acid; SOCl2\mathrm{SOCl_2} the acid chloride; MeMgBr/CdCl2\mathrm{MeMgBr/CdCl_2} (Me2Cd\mathrm{Me_2Cd}) the methyl ketone 4-iBuC6H4COCH3\mathrm{4\text{-}iBuC_6H_4COCH_3}; NaBH4\mathrm{NaBH_4} the alcohol Q = 4-iBuC6H4CH(OH)CH3\mathrm{4\text{-}iBuC_6H_4CH(OH)CH_3}.

    Why: Dialkylcadmium stops at the ketone; a Grignard would go on to the tertiary alcohol.

  4. Q →\rightarrow R: HCl gives the benzylic chloride, Mg the Grignard reagent, CO2\mathrm{CO_2} then H3O+\mathrm{H_3O^+} the carboxylic acid: R = 4-iBuC6H4CH(CH3)COOH\mathrm{4\text{-}iBuC_6H_4CH(CH_3)COOH}, ibuprofen, option (A).
AnswerAnswer: (A) 2-(4-isobutylphenyl)propanoic acid (ibuprofen)
Ask about this question
Q18

Chemistry, Question 18 (3 marks)

Organic synthesis (amines: Hofmann, carbylamine) · +3 / −1
Paragraph "A": An organic acid P (C11H12O2\mathrm{C_{11}H_{12}O_2}) can easily be oxidized to a dibasic acid which reacts with ethyleneglycol to produce a polymer dacron. Upon ozonolysis, P gives an aliphatic ketone as one of the products. P undergoes the following reaction sequences to furnish R via Q. The compound P also undergoes another set of reactions to produce S. (The scheme: P →\rightarrow Q with 1) H2/Pd-C\mathrm{H_2/Pd\text{-}C}, 2) SOCl2\mathrm{SOCl_2}, 3) MeMgBr,CdCl2\mathrm{MeMgBr, CdCl_2}, 4) NaBH4\mathrm{NaBH_4}; Q →\rightarrow R with 1) HCl, 2) Mg/Et2O\mathrm{Mg/Et_2O}, 3) CO2\mathrm{CO_2} (dry ice), 4) H3O+\mathrm{H_3O^+}; P →\rightarrow S with 1) H2/Pd-C\mathrm{H_2/Pd\text{-}C}, 2) NH3/Δ\mathrm{NH_3}/\Delta, 3) Br2/NaOH\mathrm{Br_2/NaOH}, 4) CHCl3,KOH,Δ\mathrm{CHCl_3, KOH}, \Delta, 5) H2/Pd-C\mathrm{H_2/Pd\text{-}C}.) Question: The compound S is
  1. (A)(4-sec-Butylphenyl)methanamine: CH2NH2\mathrm{CH_2NH_2} and CH(CH3)CH2CH3\mathrm{CH(CH_3)CH_2CH_3} para on the benzene ring
  2. (B)4-Isobutyl-N-methylaniline: NHCH3\mathrm{NHCH_3} and CH2CH(CH3)2\mathrm{CH_2CH(CH_3)_2} para on the benzene ring
  3. (C)(2-sec-Butylphenyl)methanamine: CH2NH2\mathrm{CH_2NH_2} and CH(CH3)CH2CH3\mathrm{CH(CH_3)CH_2CH_3} ortho on the benzene ring
  4. (D)2-Isobutyl-N-methylaniline: NHCH3\mathrm{NHCH_3} and CH2CH(CH3)2\mathrm{CH_2CH(CH_3)_2} ortho on the benzene ring

Tests: Chain Hofmann degradation, carbylamine reaction and isocyanide reduction.

Show solution
  1. P = 4-(2-methylprop-1-enyl)benzoic acid (para from terephthalic acid/dacron; acetone on ozonolysis). H2/Pd-C\mathrm{H_2/Pd\text{-}C}: 4-isobutylbenzoic acid.
  2. NH3/Δ\mathrm{NH_3}/\Delta: the ammonium salt dehydrates to 4-isobutylbenzamide, ArCONH2\mathrm{ArCONH_2}.
  3. Br2/NaOH\mathrm{Br_2/NaOH} (Hofmann bromamide degradation) removes the carbonyl carbon: 4-isobutylaniline, ArNH2\mathrm{ArNH_2}.
  4. CHCl3/KOH,Δ\mathrm{CHCl_3/KOH}, \Delta (carbylamine reaction): the isocyanide ArN≡C\mathrm{ArN{\equiv}C}. H2/Pd-C\mathrm{H_2/Pd\text{-}C} reduces the isocyanide carbon to CH3\mathrm{CH_3}: ArNHCH3\mathrm{ArNHCH_3}.

    Why: Isocyanides reduce to secondary N-methyl amines; cyanides would give primary amines.

  5. S = 4-isobutyl-N-methylaniline, option (B).
AnswerAnswer: (B) 4-isobutyl-N-methylaniline
Ask about this question

Mathematics, Section 1: 6 questions, one or more options correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct but only three are chosen; +2 if three or more options are correct but only two are chosen, both correct; +1 if two or more options are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Mathematics, Question 1 (4 marks)

Complex numbers (argument) · +4 / −2
For a non-zero complex number zz, let arg⁡(z)\arg(z) denote the principal argument with −π<arg⁡(z)≤π-\pi < \arg(z) \le \pi. Then, which of the following statement(s) is (are) FALSE?
  1. (A)arg⁡(−1−i)=π4\arg(-1 - i) = \dfrac{\pi}{4}, where i=−1i = \sqrt{-1}
  2. (B)The function f:R→(−π,π]f : \mathbb{R} \rightarrow (-\pi, \pi], defined by f(t)=arg⁡(−1+it)f(t) = \arg(-1 + it) for all t∈Rt \in \mathbb{R}, is continuous at all points of R\mathbb{R}, where i=−1i = \sqrt{-1}
  3. (C)For any two non-zero complex numbers z1z_1 and z2z_2, arg⁡(z1z2)−arg⁡(z1)+arg⁡(z2)\arg\left(\dfrac{z_1}{z_2}\right) - \arg(z_1) + \arg(z_2) is an integer multiple of 2π2\pi
  4. (D)For any three given distinct complex numbers z1z_1, z2z_2 and z3z_3, the locus of the point zz satisfying the condition arg⁡((z−z1)(z2−z3)(z−z3)(z2−z1))=π\arg\left(\dfrac{(z - z_1)(z_2 - z_3)}{(z - z_3)(z_2 - z_1)}\right) = \pi, lies on a straight line

Tests: Use the principal argument carefully and read a cross-ratio condition as a circle.

Show solution
  1. (A) −1−i-1 - i lies in the third quadrant, so its principal argument is −π+π4=−3π4-\pi + \dfrac{\pi}{4} = -\dfrac{3\pi}{4}, not π4\dfrac{\pi}{4}. Statement (A) is false.
  2. (B) For t>0t > 0, −1+it-1 + it is in the second quadrant: f(t)=π−tan⁡−1t→πf(t) = \pi - \tan^{-1} t \rightarrow \pi as t→0+t \rightarrow 0^+, and f(0)=arg⁡(−1)=πf(0) = \arg(-1) = \pi. For t<0t < 0 it is in the third quadrant: f(t)=−π+tan⁡−1∣t∣→−πf(t) = -\pi + \tan^{-1}|t| \rightarrow -\pi as t→0−t \rightarrow 0^-. The jump of 2π2\pi at t=0t = 0 makes ff discontinuous there. Statement (B) is false.

    Why: The principal branch cuts the plane along the negative real axis, which −1+it-1 + it crosses at t=0t = 0.

  3. (C) arg⁡(z1/z2)=arg⁡z1−arg⁡z2+2kπ\arg(z_1/z_2) = \arg z_1 - \arg z_2 + 2k\pi for some integer kk (the 2kπ2k\pi brings the value back into (−π,π](-\pi, \pi]). So the given expression equals 2kπ2k\pi. Statement (C) is true.
  4. (D) Argument π\pi means the cross ratio (z−z1)(z2−z3)(z−z3)(z2−z1)\dfrac{(z - z_1)(z_2 - z_3)}{(z - z_3)(z_2 - z_1)} is a negative real number. A real cross ratio means z,z1,z2,z3z, z_1, z_2, z_3 are concyclic (or collinear). For three non-collinear points the locus is an arc of the circle through z1,z2,z3z_1, z_2, z_3, not a straight line. Statement (D) is false.
  5. The FALSE statements are (A), (B) and (D).
AnswerAnswer: (A), (B), (D)
Ask about this question
Q2

Mathematics, Question 2 (4 marks)

Properties of triangles · +4 / −2
In a triangle PQRPQR, let ∠PQR=30∘\angle PQR = 30^\circ and the sides PQPQ and QRQR have lengths 10310\sqrt{3} and 1010, respectively. Then, which of the following statement(s) is (are) TRUE?
  1. (A)∠QPR=45∘\angle QPR = 45^\circ
  2. (B)The area of the triangle PQRPQR is 25325\sqrt{3} and ∠QRP=120∘\angle QRP = 120^\circ
  3. (C)The radius of the incircle of the triangle PQRPQR is 103−1510\sqrt{3} - 15
  4. (D)The area of the circumcircle of the triangle PQRPQR is 100π100\pi

Tests: Solve a triangle from two sides and the included angle, then find its area, inradius and circumradius.

Show solution
  1. Cosine rule for the third side PRPR: PR2=PQ2+QR2−2⋅PQ⋅QRcos⁡30∘=300+100−2⋅103⋅10⋅32=100PR^2 = PQ^2 + QR^2 - 2 \cdot PQ \cdot QR \cos 30^\circ = 300 + 100 - 2 \cdot 10\sqrt{3} \cdot 10 \cdot \dfrac{\sqrt{3}}{2} = 100, so PR=10PR = 10.
  2. PR=QR=10PR = QR = 10, so the triangle is isosceles: the angles opposite these sides are equal, ∠Q=∠P=30∘\angle Q = \angle P = 30^\circ, and ∠R=120∘\angle R = 120^\circ. (A) is false.
  3. (B) Area =12⋅PQ⋅QRsin⁡30∘=12⋅103⋅10⋅12=253= \dfrac{1}{2} \cdot PQ \cdot QR \sin 30^\circ = \dfrac{1}{2} \cdot 10\sqrt{3} \cdot 10 \cdot \dfrac{1}{2} = 25\sqrt{3}, and ∠QRP=120∘\angle QRP = 120^\circ. True.
  4. (C) Semi-perimeter s=10+10+1032=10+53s = \dfrac{10 + 10 + 10\sqrt{3}}{2} = 10 + 5\sqrt{3}. Inradius r=Δs=25310+53=532+3=53(2−3)=103−15r = \dfrac{\Delta}{s} = \dfrac{25\sqrt{3}}{10 + 5\sqrt{3}} = \dfrac{5\sqrt{3}}{2 + \sqrt{3}} = 5\sqrt{3}(2 - \sqrt{3}) = 10\sqrt{3} - 15. True.
  5. (D) Circumradius R=PR2sin⁡Q=102⋅12=10R = \dfrac{PR}{2 \sin Q} = \dfrac{10}{2 \cdot \frac{1}{2}} = 10, so the circumcircle's area is 100π100\pi. True.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q3

Mathematics, Question 3 (4 marks)

Three-dimensional geometry (planes and lines) · +4 / −2
Let P1:2x+y−z=3P_1 : 2x + y - z = 3 and P2:x+2y+z=2P_2 : x + 2y + z = 2 be two planes. Then, which of the following statement(s) is (are) TRUE?
  1. (A)The line of intersection of P1P_1 and P2P_2 has direction ratios 1,2,−11, 2, -1
  2. (B)The line 3x−49=1−3y9=z3\dfrac{3x - 4}{9} = \dfrac{1 - 3y}{9} = \dfrac{z}{3} is perpendicular to the line of intersection of P1P_1 and P2P_2
  3. (C)The acute angle between P1P_1 and P2P_2 is 60∘60^\circ
  4. (D)If P3P_3 is the plane passing through the point (4,2,−2)(4, 2, -2) and perpendicular to the line of intersection of P1P_1 and P2P_2, then the distance of the point (2,1,1)(2, 1, 1) from the plane P3P_3 is 23\dfrac{2}{\sqrt{3}}

Tests: Find the line of intersection of two planes with a cross product and use it for angles, perpendicularity and distances.

Show solution
  1. Normals: n⃗1=(2,1,−1)\vec{n}_1 = (2, 1, -1), n⃗2=(1,2,1)\vec{n}_2 = (1, 2, 1). The line of intersection is along n⃗1×n⃗2=(1⋅1−(−1)⋅2, (−1)⋅1−2⋅1, 2⋅2−1⋅1)=(3,−3,3)∝(1,−1,1)\vec{n}_1 \times \vec{n}_2 = (1\cdot 1 - (-1)\cdot 2,\ (-1)\cdot 1 - 2 \cdot 1,\ 2\cdot 2 - 1 \cdot 1) = (3, -3, 3) \propto (1, -1, 1). So (A), with 1,2,−11, 2, -1, is false.
  2. (B) Rewrite the line: x−4/33=y−1/3−3=z3\dfrac{x - 4/3}{3} = \dfrac{y - 1/3}{-3} = \dfrac{z}{3}, direction (3,−3,3)∝(1,−1,1)(3, -3, 3) \propto (1, -1, 1). It is parallel to the line of intersection, not perpendicular. False.

    Why: Divide each numerator by the coefficient of the variable so that x, y, z have coefficient 1.

  3. (C) cos⁡θ=∣n⃗1⋅n⃗2∣∣n⃗1∣∣n⃗2∣=∣2+2−1∣66=12\cos\theta = \dfrac{|\vec{n}_1 \cdot \vec{n}_2|}{|\vec{n}_1||\vec{n}_2|} = \dfrac{|2 + 2 - 1|}{\sqrt{6}\sqrt{6}} = \dfrac{1}{2}, so θ=60∘\theta = 60^\circ. True.
  4. (D) P3P_3 has normal (1,−1,1)(1, -1, 1) and passes through (4,2,−2)(4, 2, -2): x−y+z=4−2−2=0x - y + z = 4 - 2 - 2 = 0. Distance of (2,1,1)(2, 1, 1): ∣2−1+1∣3=23\dfrac{|2 - 1 + 1|}{\sqrt{3}} = \dfrac{2}{\sqrt{3}}. True.
AnswerAnswer: (C), (D)
Ask about this question
Q4

Mathematics, Question 4 (4 marks)

Mean value theorem and applications of derivatives · +4 / −2
For every twice differentiable function f:R→[−2,2]f : \mathbb{R} \rightarrow [-2, 2] with (f(0))2+(f′(0))2=85(f(0))^2 + (f'(0))^2 = 85, which of the following statement(s) is (are) TRUE?
  1. (A)There exist r,s∈Rr, s \in \mathbb{R}, where r<sr < s, such that ff is one-one on the open interval (r,s)(r, s)
  2. (B)There exists x0∈(−4,0)x_0 \in (-4, 0) such that ∣f′(x0)∣≤1|f'(x_0)| \le 1
  3. (C)lim⁡x→∞f(x)=1\displaystyle\lim_{x \rightarrow \infty} f(x) = 1
  4. (D)There exists α∈(−4,4)\alpha \in (-4, 4) such that f(α)+f′′(α)=0f(\alpha) + f''(\alpha) = 0 and f′(α)≠0f'(\alpha) \ne 0

Tests: Use LMVT and a well-chosen auxiliary function to prove existence statements about a bounded function.

Show solution
  1. Since ∣f(0)∣≤2|f(0)| \le 2, (f(0))2≤4(f(0))^2 \le 4, so (f′(0))2≥81(f'(0))^2 \ge 81: ∣f′(0)∣≥9|f'(0)| \ge 9.
  2. (A) ff is twice differentiable, so f′f' is continuous; f′(0)≠0f'(0) \ne 0 keeps f′f' of one sign on some interval (r,s)(r, s) around 0. There ff is strictly monotonic, hence one-one. True.
  3. (B) LMVT on [−4,0][-4, 0]: some x0∈(−4,0)x_0 \in (-4, 0) has f′(x0)=f(0)−f(−4)4f'(x_0) = \dfrac{f(0) - f(-4)}{4}, and ∣f(0)−f(−4)∣≤4|f(0) - f(-4)| \le 4 (both values in [−2,2][-2, 2]). So ∣f′(x0)∣≤1|f'(x_0)| \le 1. True.
  4. (C) Counterexample: f(x)=2sin⁡(852x)f(x) = 2\sin\left(\dfrac{\sqrt{85}}{2}x\right) maps into [−2,2][-2, 2], with f(0)=0f(0) = 0, f′(0)=85f'(0) = \sqrt{85}, so (f(0))2+(f′(0))2=85(f(0))^2 + (f'(0))^2 = 85; its limit at ∞\infty does not exist. False.
  5. (D) Let g(x)=(f(x))2+(f′(x))2g(x) = (f(x))^2 + (f'(x))^2, so g(0)=85g(0) = 85. As in (B), there are a∈(−4,0)a \in (-4, 0) and b∈(0,4)b \in (0, 4) with ∣f′(a)∣,∣f′(b)∣≤1|f'(a)|, |f'(b)| \le 1, so g(a),g(b)≤4+1=5g(a), g(b) \le 4 + 1 = 5.
  6. So gg on [a,b][a, b] attains its maximum at an interior point α\alpha (the maximum is at least 85>585 > 5). There g′(α)=2f′(α)(f(α)+f′′(α))=0g'(\alpha) = 2f'(\alpha)\big(f(\alpha) + f''(\alpha)\big) = 0, and g(α)≥85g(\alpha) \ge 85 gives (f′(α))2≥81(f'(\alpha))^2 \ge 81, so f′(α)≠0f'(\alpha) \ne 0 and f(α)+f′′(α)=0f(\alpha) + f''(\alpha) = 0, with α∈(−4,4)\alpha \in (-4, 4). True.

    Why: A maximum inside an interval of a differentiable function is a critical point.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q5

Mathematics, Question 5 (4 marks)

Differential equations (variable separable) · +4 / −2
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} and g:R→Rg : \mathbb{R} \rightarrow \mathbb{R} be two non-constant differentiable functions. If f′(x)=(e(f(x)−g(x)))g′(x)f'(x) = \left(e^{(f(x) - g(x))}\right) g'(x) for all x∈Rx \in \mathbb{R}, and f(1)=g(2)=1f(1) = g(2) = 1, then which of the following statement(s) is (are) TRUE?
  1. (A)f(2)<1−log⁡e2f(2) < 1 - \log_e 2
  2. (B)f(2)>1−log⁡e2f(2) > 1 - \log_e 2
  3. (C)g(1)>1−log⁡e2g(1) > 1 - \log_e 2
  4. (D)g(1)<1−log⁡e2g(1) < 1 - \log_e 2

Tests: Separate variables to find an invariant of two functions and turn it into inequalities.

Show solution
  1. Separate: e−f(x)f′(x)=e−g(x)g′(x)e^{-f(x)} f'(x) = e^{-g(x)} g'(x). Integrate: −e−f(x)=−e−g(x)+C-e^{-f(x)} = -e^{-g(x)} + C, i.e. e−f(x)−e−g(x)e^{-f(x)} - e^{-g(x)} is a constant.
  2. Equate the constant at x=1x = 1 and x=2x = 2: e−f(1)−e−g(1)=e−f(2)−e−g(2)e^{-f(1)} - e^{-g(1)} = e^{-f(2)} - e^{-g(2)}, i.e. e−1−e−g(1)=e−f(2)−e−1e^{-1} - e^{-g(1)} = e^{-f(2)} - e^{-1}.
  3. So e−f(2)+e−g(1)=2ee^{-f(2)} + e^{-g(1)} = \dfrac{2}{e}. Both terms are positive, so each is less than 2e\dfrac{2}{e}.
  4. e−f(2)<2e⇒−f(2)<log⁡e2−1⇒f(2)>1−log⁡e2e^{-f(2)} < \dfrac{2}{e} \Rightarrow -f(2) < \log_e 2 - 1 \Rightarrow f(2) > 1 - \log_e 2. In the same way g(1)>1−log⁡e2g(1) > 1 - \log_e 2. So (B) and (C) are true, (A) and (D) false.
AnswerAnswer: (B), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Integral equations and area under curves · +4 / −2
Let f:[0,∞)→Rf : [0, \infty) \rightarrow \mathbb{R} be a continuous function such that f(x)=1−2x+∫0xex−tf(t) dtf(x) = 1 - 2x + \int_0^x e^{x - t} f(t)\,dt for all x∈[0,∞)x \in [0, \infty). Then, which of the following statement(s) is (are) TRUE?
  1. (A)The curve y=f(x)y = f(x) passes through the point (1,2)(1, 2)
  2. (B)The curve y=f(x)y = f(x) passes through the point (2,−1)(2, -1)
  3. (C)The area of the region {(x,y)∈[0,1]×R:f(x)≤y≤1−x2}\{(x, y) \in [0, 1] \times \mathbb{R} : f(x) \le y \le \sqrt{1 - x^2}\} is π−24\dfrac{\pi - 2}{4}
  4. (D)The area of the region {(x,y)∈[0,1]×R:f(x)≤y≤1−x2}\{(x, y) \in [0, 1] \times \mathbb{R} : f(x) \le y \le \sqrt{1 - x^2}\} is π−14\dfrac{\pi - 1}{4}

Tests: Convert an integral equation into a linear differential equation, solve it, and use the solution to find an area.

Show solution
  1. Write f(x)=1−2x+ex∫0xe−tf(t) dtf(x) = 1 - 2x + e^x \displaystyle\int_0^x e^{-t} f(t)\,dt; at x=0x = 0, f(0)=1f(0) = 1.
  2. Differentiate: f′(x)=−2+ex∫0xe−tf(t) dt+f(x)=−2+(f(x)−1+2x)+f(x)f'(x) = -2 + e^x \displaystyle\int_0^x e^{-t} f(t)\,dt + f(x) = -2 + (f(x) - 1 + 2x) + f(x), so f′−2f=2x−3f' - 2f = 2x - 3.

    Why: The integral term equals f(x) − 1 + 2x from the given equation.

  3. Integrating factor e−2xe^{-2x}: (fe−2x)′=(2x−3)e−2x(f e^{-2x})' = (2x - 3)e^{-2x}, and ∫(2x−3)e−2x dx=(1−x)e−2x+C\displaystyle\int (2x - 3)e^{-2x}\,dx = (1 - x)e^{-2x} + C. So f(x)=1−x+Ce2xf(x) = 1 - x + Ce^{2x}; f(0)=1f(0) = 1 gives C=0C = 0: f(x)=1−xf(x) = 1 - x.
  4. (A) f(1)=0≠2f(1) = 0 \ne 2: false. (B) f(2)=−1f(2) = -1: true.
  5. On [0,1][0, 1], 1−x≤1−x21 - x \le \sqrt{1 - x^2} (the chord lies below the quarter circle). Area =∫011−x2 dx−∫01(1−x) dx=π4−12=π−24= \displaystyle\int_0^1 \sqrt{1 - x^2}\,dx - \int_0^1 (1 - x)\,dx = \dfrac{\pi}{4} - \dfrac{1}{2} = \dfrac{\pi - 2}{4}. (C) true, (D) false.
AnswerAnswer: (B), (C)
Ask about this question

Mathematics, Section 2: 8 questions, answer is a numerical value (truncated/rounded-off to the second decimal place): +3 if only the correct value is entered, 0 in all other cases (no negative marks)

Q7

Mathematics, Question 7 (3 marks)

Logarithms · +3
The value of ((log⁡29)2)1log⁡2(log⁡29)×(7)1log⁡47\left((\log_2 9)^2\right)^{\frac{1}{\log_2(\log_2 9)}} \times \left(\sqrt{7}\right)^{\frac{1}{\log_4 7}} is ______.

Tests: Simplify powers of logarithms with the change-of-base rule and a^(log_a b) = b.

Show solution
  1. Let a=log⁡29a = \log_2 9. First factor: (a2)1log⁡2a=a2log⁡a2=(alog⁡a2)2=22=4(a^2)^{\frac{1}{\log_2 a}} = a^{2\log_a 2} = \left(a^{\log_a 2}\right)^2 = 2^2 = 4.

    Why: 1log⁡2a=log⁡a2\dfrac{1}{\log_2 a} = \log_a 2.

  2. Second factor: (7)1log⁡47=712log⁡74=(7log⁡74)1/2=41/2=2(\sqrt{7})^{\frac{1}{\log_4 7}} = 7^{\frac{1}{2}\log_7 4} = \left(7^{\log_7 4}\right)^{1/2} = 4^{1/2} = 2.
  3. Product =4×2=8= 4 \times 2 = 8.
AnswerAnswer: 8.00
Ask about this question
Q8

Mathematics, Question 8 (3 marks)

Permutations and combinations (divisibility) · +3
The number of 5 digit numbers which are divisible by 4, with digits from the set {1,2,3,4,5}\{1, 2, 3, 4, 5\} and the repetition of digits is allowed, is ______.

Tests: Count numbers with a divisibility condition using the last-two-digits test.

Show solution
  1. A number is divisible by 4 exactly when its last two digits form a number divisible by 4.
  2. Two-digit endings from {1,2,3,4,5}\{1, 2, 3, 4, 5\} divisible by 4: 12,24,32,44,5212, 24, 32, 44, 52, i.e. 5 endings.

    Why: The last digit must be even (2 or 4); check each tens digit.

  3. The first three digits are free: 53=1255^3 = 125 ways.
  4. Total =125×5=625= 125 \times 5 = 625.
AnswerAnswer: 625.00
Ask about this question
Q9

Mathematics, Question 9 (3 marks)

Arithmetic progressions and sets · +3
Let XX be the set consisting of the first 2018 terms of the arithmetic progression 1,6,11,…1, 6, 11, \ldots, and YY be the set consisting of the first 2018 terms of the arithmetic progression 9,16,23,…9, 16, 23, \ldots. Then, the number of elements in the set X∪YX \cup Y is ______.

Tests: Count the common terms of two APs and use n(X ∪ Y) = n(X) + n(Y) − n(X ∩ Y).

Show solution
  1. Last terms: XX ends at 1+5×2017=100861 + 5 \times 2017 = 10086; YY ends at 9+7×2017=141289 + 7 \times 2017 = 14128.
  2. Common terms are ≡1(mod5)\equiv 1 \pmod 5 and ≡2(mod7)\equiv 2 \pmod 7. Checking 1,6,11,161, 6, 11, 16: 16=2×7+216 = 2 \times 7 + 2, so the first common term is 16, and the common terms form an AP with difference lcm(5,7)=35\text{lcm}(5, 7) = 35.
  3. They must not exceed 10086 (the smaller last term): 16+35(k−1)≤10086⇒k−1≤287.716 + 35(k - 1) \le 10086 \Rightarrow k - 1 \le 287.7, so k=288k = 288 common terms.
  4. n(X∪Y)=2018+2018−288=3748n(X \cup Y) = 2018 + 2018 - 288 = 3748.
AnswerAnswer: 3748.00
Ask about this question
Q10

Mathematics, Question 10 (3 marks)

Inverse trigonometric functions and infinite GP · +3
The number of real solutions of the equation sin⁡−1(∑i=1∞xi+1−x∑i=1∞(x2)i)=π2−cos⁡−1(∑i=1∞(−x2)i−∑i=1∞(−x)i)\sin^{-1}\left(\sum_{i=1}^{\infty} x^{i+1} - x\sum_{i=1}^{\infty}\left(\frac{x}{2}\right)^i\right) = \frac{\pi}{2} - \cos^{-1}\left(\sum_{i=1}^{\infty}\left(-\frac{x}{2}\right)^i - \sum_{i=1}^{\infty}(-x)^i\right) lying in the interval (−12,12)\left(-\dfrac{1}{2}, \dfrac{1}{2}\right) is ______. (Here, the inverse trigonometric functions sin⁡−1x\sin^{-1}x and cos⁡−1x\cos^{-1}x assume values in [−π2,π2]\left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right] and [0,π][0, \pi], respectively.)

Tests: Sum infinite geometric series, reduce an inverse-trig equation to an algebraic one and count its roots in an interval.

Show solution
  1. For ∣x∣<12|x| < \dfrac{1}{2} every series converges. Left argument: A=x21−x−x⋅x/21−x/2=x21−x−x22−x=x2(1−x)(2−x)A = \dfrac{x^2}{1 - x} - x \cdot \dfrac{x/2}{1 - x/2} = \dfrac{x^2}{1 - x} - \dfrac{x^2}{2 - x} = \dfrac{x^2}{(1 - x)(2 - x)}.
  2. Right argument: B=−x/21+x/2−−x1+x=−x2+x+x1+x=x(1+x)(2+x)B = \dfrac{-x/2}{1 + x/2} - \dfrac{-x}{1 + x} = -\dfrac{x}{2 + x} + \dfrac{x}{1 + x} = \dfrac{x}{(1 + x)(2 + x)}.
  3. π2−cos⁡−1B=sin⁡−1B\dfrac{\pi}{2} - \cos^{-1} B = \sin^{-1} B, so the equation is sin⁡−1A=sin⁡−1B\sin^{-1} A = \sin^{-1} B, i.e. A=BA = B (both are small, inside [−1,1][-1, 1]).
  4. x2(1−x)(2−x)=x(1+x)(2+x)\dfrac{x^2}{(1 - x)(2 - x)} = \dfrac{x}{(1 + x)(2 + x)}. One solution is x=0x = 0. Otherwise x(1+x)(2+x)=(1−x)(2−x)x(1 + x)(2 + x) = (1 - x)(2 - x), i.e. x3+2x2+5x−2=0x^3 + 2x^2 + 5x - 2 = 0.
  5. Let h(x)=x3+2x2+5x−2h(x) = x^3 + 2x^2 + 5x - 2. h′(x)=3x2+4x+5>0h'(x) = 3x^2 + 4x + 5 > 0 (discriminant 16−60<016 - 60 < 0), so hh has exactly one real root. h(0)=−2<0h(0) = -2 < 0 and h(1/2)=18+12+52−2=98>0h(1/2) = \dfrac{1}{8} + \dfrac{1}{2} + \dfrac{5}{2} - 2 = \dfrac{9}{8} > 0, so that root lies in (0,12)(0, \tfrac{1}{2}) (about 0.34).
  6. Total: x=0x = 0 and one root in (0,12)(0, \tfrac{1}{2}), so 2 solutions.
AnswerAnswer: 2.00
Ask about this question
Q11

Mathematics, Question 11 (3 marks)

Limits as definite integrals · +3
For each positive integer nn, let yn=1n((n+1)(n+2)⋯(n+n))1n.y_n = \frac{1}{n}\left((n + 1)(n + 2)\cdots(n + n)\right)^{\frac{1}{n}}. For x∈Rx \in \mathbb{R}, let [x][x] be the greatest integer less than or equal to xx. If lim⁡n→∞yn=L\displaystyle\lim_{n \rightarrow \infty} y_n = L, then the value of [L][L] is ______.

Tests: Turn the limit of a product into an integral by taking logarithms.

Show solution
  1. yn=(∏r=1nn+rn)1/ny_n = \left(\displaystyle\prod_{r=1}^{n} \dfrac{n + r}{n}\right)^{1/n}, so ln⁡yn=1n∑r=1nln⁡(1+rn)\ln y_n = \dfrac{1}{n}\displaystyle\sum_{r=1}^{n} \ln\left(1 + \dfrac{r}{n}\right).

    Why: Put the 1/n inside as n copies of 1/n under the n-th root.

  2. As a Riemann sum: ln⁡L=∫01ln⁡(1+x) dx=[(1+x)ln⁡(1+x)−x]01=2ln⁡2−1\ln L = \displaystyle\int_0^1 \ln(1 + x)\,dx = \Big[(1 + x)\ln(1 + x) - x\Big]_0^1 = 2\ln 2 - 1.
  3. L=e2ln⁡2−1=4e≈1.47L = e^{2\ln 2 - 1} = \dfrac{4}{e} \approx 1.47, so [L]=1[L] = 1.
AnswerAnswer: 1.00
Ask about this question
Q12

Mathematics, Question 12 (3 marks)

Vector algebra · +3
Let a⃗\vec{a} and b⃗\vec{b} be two unit vectors such that a⃗⋅b⃗=0\vec{a} \cdot \vec{b} = 0. For some x,y∈Rx, y \in \mathbb{R}, let c⃗=xa⃗+yb⃗+(a⃗×b⃗)\vec{c} = x\vec{a} + y\vec{b} + (\vec{a} \times \vec{b}). If ∣c⃗∣=2|\vec{c}| = 2 and the vector c⃗\vec{c} is inclined at the same angle α\alpha to both a⃗\vec{a} and b⃗\vec{b}, then the value of 8cos⁡2α8\cos^2\alpha is ______.

Tests: Use an orthonormal triple to read off components and the magnitude of a vector.

Show solution
  1. a⃗\vec{a}, b⃗\vec{b} and a⃗×b⃗\vec{a} \times \vec{b} are mutually perpendicular unit vectors (∣a⃗×b⃗∣=sin⁡90∘=1|\vec{a} \times \vec{b}| = \sin 90^\circ = 1).
  2. c⃗⋅a⃗=x\vec{c} \cdot \vec{a} = x and c⃗⋅b⃗=y\vec{c} \cdot \vec{b} = y. Same angle α\alpha with ∣c⃗∣=2|\vec{c}| = 2: x=y=2cos⁡αx = y = 2\cos\alpha.
  3. ∣c⃗∣2=x2+y2+1=4⇒8cos⁡2α+1=4⇒8cos⁡2α=3|\vec{c}|^2 = x^2 + y^2 + 1 = 4 \Rightarrow 8\cos^2\alpha + 1 = 4 \Rightarrow 8\cos^2\alpha = 3.
AnswerAnswer: 3.00
Ask about this question
Q13

Mathematics, Question 13 (3 marks)

Trigonometric equations · +3
Let a,b,ca, b, c be three non-zero real numbers such that the equation 3 acos⁡x+2bsin⁡x=c,x∈[−π2,π2],\sqrt{3}\,a\cos x + 2b\sin x = c, \quad x \in \left[-\frac{\pi}{2}, \frac{\pi}{2}\right], has two distinct real roots α\alpha and β\beta with α+β=π3\alpha + \beta = \dfrac{\pi}{3}. Then, the value of ba\dfrac{b}{a} is ______.

Tests: Use two roots of a linear trigonometric equation and sum-to-product formulas to relate its coefficients.

Show solution
  1. Put x=αx = \alpha and x=βx = \beta and subtract: 3a(cos⁡α−cos⁡β)+2b(sin⁡α−sin⁡β)=0\sqrt{3}a(\cos\alpha - \cos\beta) + 2b(\sin\alpha - \sin\beta) = 0.
  2. Sum-to-product: −23asin⁡α+β2sin⁡α−β2+4bcos⁡α+β2sin⁡α−β2=0-2\sqrt{3}a\sin\dfrac{\alpha + \beta}{2}\sin\dfrac{\alpha - \beta}{2} + 4b\cos\dfrac{\alpha + \beta}{2}\sin\dfrac{\alpha - \beta}{2} = 0.
  3. α≠β\alpha \ne \beta and both lie in [−π2,π2][-\tfrac{\pi}{2}, \tfrac{\pi}{2}], so 0<∣α−β∣≤π0 < |\alpha - \beta| \le \pi and sin⁡α−β2≠0\sin\dfrac{\alpha - \beta}{2} \ne 0. Divide by it: −23asin⁡π6+4bcos⁡π6=0-2\sqrt{3}a\sin\dfrac{\pi}{6} + 4b\cos\dfrac{\pi}{6} = 0.
  4. −3a+23b=0⇒ba=12=0.5-\sqrt{3}a + 2\sqrt{3}b = 0 \Rightarrow \dfrac{b}{a} = \dfrac{1}{2} = 0.5.
AnswerAnswer: 0.50
Ask about this question
Q14

Mathematics, Question 14 (3 marks)

Area under curves · +3
A farmer F1F_1 has a land in the shape of a triangle with vertices at P(0,0)P(0, 0), Q(1,1)Q(1, 1) and R(2,0)R(2, 0). From this land, a neighbouring farmer F2F_2 takes away the region which lies between the side PQPQ and a curve of the form y=xny = x^n (n>1)(n > 1). If the area of the region taken away by the farmer F2F_2 is exactly 30%30\% of the area of ΔPQR\Delta PQR, then the value of nn is ______.

Tests: Find the area between a line and a power curve and solve for the exponent.

Show solution
  1. Area of ΔPQR=12×2×1=1\Delta PQR = \dfrac{1}{2} \times 2 \times 1 = 1, so F2F_2 takes area 0.30.3.
  2. Side PQPQ is y=xy = x; for n>1n > 1 the curve y=xny = x^n lies below it on (0,1)(0, 1) and meets it at PP and QQ, so the region lies inside the triangle.
  3. Area =∫01(x−xn) dx=12−1n+1=0.3⇒1n+1=0.2⇒n=4= \displaystyle\int_0^1 (x - x^n)\,dx = \dfrac{1}{2} - \dfrac{1}{n + 1} = 0.3 \Rightarrow \dfrac{1}{n + 1} = 0.2 \Rightarrow n = 4.
AnswerAnswer: 4.00
Ask about this question

Mathematics, Section 3: 2 paragraphs with 2 questions each, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Mathematics, Question 15 (3 marks)

Circles (chord of contact) · +3 / −1
Paragraph "X": Let SS be the circle in the xyxy-plane defined by the equation x2+y2=4x^2 + y^2 = 4. Question: Let E1E2E_1E_2 and F1F2F_1F_2 be the chords of SS passing through the point P0(1,1)P_0(1, 1) and parallel to the xx-axis and the yy-axis, respectively. Let G1G2G_1G_2 be the chord of SS passing through P0P_0 and having slope −1-1. Let the tangents to SS at E1E_1 and E2E_2 meet at E3E_3, the tangents to SS at F1F_1 and F2F_2 meet at F3F_3, and the tangents to SS at G1G_1 and G2G_2 meet at G3G_3. Then, the points E3E_3, F3F_3, and G3G_3 lie on the curve
  1. (A)x+y=4x + y = 4
  2. (B)(x−4)2+(y−4)2=16(x - 4)^2 + (y - 4)^2 = 16
  3. (C)(x−4)(y−4)=4(x - 4)(y - 4) = 4
  4. (D)xy=4xy = 4

Tests: Find the point of intersection of tangents at the ends of a chord using the chord of contact.

Show solution
  1. Each chord is the chord of contact of the point where its two tangents meet. For x2+y2=4x^2 + y^2 = 4, the chord of contact of (h,k)(h, k) is hx+ky=4hx + ky = 4.
  2. E1E2E_1E_2: y=1y = 1, i.e. 0⋅x+4y=40\cdot x + 4y = 4, so E3=(0,4)E_3 = (0, 4). F1F2F_1F_2: x=1x = 1, so F3=(4,0)F_3 = (4, 0).
  3. G1G2G_1G_2: slope −1-1 through (1,1)(1, 1) is x+y=2x + y = 2, i.e. 2x+2y=42x + 2y = 4, so G3=(2,2)G_3 = (2, 2).
  4. All three satisfy x+y=4x + y = 4. Check the others: (0,4)(0, 4) gives (x−4)2+(y−4)2=16(x-4)^2 + (y-4)^2 = 16 but (2,2)(2, 2) gives 8≠168 \ne 16; (0,4)(0, 4) fails (x−4)(y−4)=4(x - 4)(y - 4) = 4 and xy=4xy = 4.

    Why: In fact any chord through P₀ has its pole on the polar of P₀, which is x + y = 4.

AnswerAnswer: (A) x+y=4x + y = 4
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Circles (tangents and locus) · +3 / −1
Paragraph "X": Let SS be the circle in the xyxy-plane defined by the equation x2+y2=4x^2 + y^2 = 4. Question: Let PP be a point on the circle SS with both coordinates being positive. Let the tangent to SS at PP intersect the coordinate axes at the points MM and NN. Then, the mid-point of the line segment MNMN must lie on the curve
  1. (A)(x+y)2=3xy(x + y)^2 = 3xy
  2. (B)x2/3+y2/3=24/3x^{2/3} + y^{2/3} = 2^{4/3}
  3. (C)x2+y2=2xyx^2 + y^2 = 2xy
  4. (D)x2+y2=x2y2x^2 + y^2 = x^2y^2

Tests: Find the locus of the mid-point of the intercept made by a tangent on the axes.

Show solution
  1. Take P=(2cos⁡θ,2sin⁡θ)P = (2\cos\theta, 2\sin\theta), 0<θ<π20 < \theta < \dfrac{\pi}{2}. Tangent: xcos⁡θ+ysin⁡θ=2x\cos\theta + y\sin\theta = 2.
  2. It meets the axes at M=(2cos⁡θ,0)M = \left(\dfrac{2}{\cos\theta}, 0\right) and N=(0,2sin⁡θ)N = \left(0, \dfrac{2}{\sin\theta}\right). Mid-point: (h,k)=(1cos⁡θ,1sin⁡θ)(h, k) = \left(\dfrac{1}{\cos\theta}, \dfrac{1}{\sin\theta}\right).
  3. Eliminate θ\theta: cos⁡θ=1h\cos\theta = \dfrac{1}{h}, sin⁡θ=1k\sin\theta = \dfrac{1}{k}, so 1h2+1k2=1\dfrac{1}{h^2} + \dfrac{1}{k^2} = 1, i.e. h2+k2=h2k2h^2 + k^2 = h^2k^2.
AnswerAnswer: (D) x2+y2=x2y2x^2 + y^2 = x^2y^2
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Probability (derangements) · +3 / −1
Paragraph "A": There are five students S1,S2,S3,S4S_1, S_2, S_3, S_4 and S5S_5 in a music class and for them there are five seats R1,R2,R3,R4R_1, R_2, R_3, R_4 and R5R_5 arranged in a row, where initially the seat RiR_i is allotted to the student SiS_i, i=1,2,3,4,5i = 1, 2, 3, 4, 5. But, on the examination day, the five students are randomly allotted the five seats. Question: The probability that, on the examination day, the student S1S_1 gets the previously allotted seat R1R_1, and NONE of the remaining students gets the seat previously allotted to him/her is
  1. (A)340\dfrac{3}{40}
  2. (B)18\dfrac{1}{8}
  3. (C)740\dfrac{7}{40}
  4. (D)15\dfrac{1}{5}

Tests: Count arrangements with one fixed point and the rest deranged.

Show solution
  1. Total allotments: 5!=1205! = 120.
  2. S1S_1 sits in R1R_1, and S2,…,S5S_2, \ldots, S_5 form a derangement of R2,…,R5R_2, \ldots, R_5: D4=4!(1−1+12!−13!+14!)=12−4+1=9D_4 = 4!\left(1 - 1 + \dfrac{1}{2!} - \dfrac{1}{3!} + \dfrac{1}{4!}\right) = 12 - 4 + 1 = 9.
  3. Probability =9120=340= \dfrac{9}{120} = \dfrac{3}{40}.
AnswerAnswer: (A) 340\dfrac{3}{40}
Ask about this question
Q18

Mathematics, Question 18 (3 marks)

Probability (inclusion-exclusion) · +3 / −1
Paragraph "A": There are five students S1,S2,S3,S4S_1, S_2, S_3, S_4 and S5S_5 in a music class and for them there are five seats R1,R2,R3,R4R_1, R_2, R_3, R_4 and R5R_5 arranged in a row, where initially the seat RiR_i is allotted to the student SiS_i, i=1,2,3,4,5i = 1, 2, 3, 4, 5. But, on the examination day, the five students are randomly allotted the five seats. Question: For i=1,2,3,4i = 1, 2, 3, 4, let TiT_i denote the event that the students SiS_i and Si+1S_{i+1} do NOT sit adjacent to each other on the day of the examination. Then, the probability of the event T1∩T2∩T3∩T4T_1 \cap T_2 \cap T_3 \cap T_4 is
  1. (A)115\dfrac{1}{15}
  2. (B)110\dfrac{1}{10}
  3. (C)760\dfrac{7}{60}
  4. (D)15\dfrac{1}{5}

Tests: Count arrangements in a row with no two consecutive-numbered people adjacent, by inclusion-exclusion.

Show solution
  1. Let AiA_i be the event "SiS_i and Si+1S_{i+1} are adjacent" (complement of TiT_i). Count arrangements of 5 in a row where no AiA_i happens, using inclusion-exclusion.
  2. Single: ∣Ai∣=2⋅4!=48|A_i| = 2 \cdot 4! = 48, four of them: 192192.
  3. Pairs: overlapping (A1A2A_1A_2, A2A3A_2A_3, A3A4A_3A_4): a block of three in order or reversed, 2⋅3!=122 \cdot 3! = 12 each, total 36. Disjoint (A1A3A_1A_3, A1A4A_1A_4, A2A4A_2A_4): two blocks, 2⋅2⋅3!=242 \cdot 2 \cdot 3! = 24 each, total 72. Sum =108= 108.
  4. Triples: A1A2A3A_1A_2A_3 and A2A3A4A_2A_3A_4 (block of four): 2⋅2!=42 \cdot 2! = 4 each; A1A2A4A_1A_2A_4 and A1A3A4A_1A_3A_4 (block of three and block of two): 2⋅2⋅2!=82 \cdot 2 \cdot 2! = 8 each. Sum =24= 24. All four: the whole chain S1…S5S_1 \ldots S_5 in order or reversed: 22.
  5. At least one adjacency: 192−108+24−2=106192 - 108 + 24 - 2 = 106. None: 120−106=14120 - 106 = 14.
  6. Probability =14120=760= \dfrac{14}{120} = \dfrac{7}{60}.
AnswerAnswer: (C) 760\dfrac{7}{60}
Ask about this question

Questions are quoted from JEE (Advanced) 2018 Paper 1 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.