AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2018 Paper 2: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2018 Paper 2 solved step by step: Physics, Chemistry and Mathematics, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2018 Paper 2: 54 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2018: Paper 1.

Physics, Section 1: 6 questions, one or more options correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct and only three are chosen; +2 if three or more are correct and only two are chosen, both correct; +1 if two or more are correct and only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Physics, Question 1 (4 marks)

Work, energy and power · +4 / −2
A particle of mass mm is initially at rest at the origin. It is subjected to a force and starts moving along the xx-axis. Its kinetic energy KK changes with time as dK/dt=γtdK/dt = \gamma t, where γ\gamma is a positive constant of appropriate dimensions. Which of the following statements is (are) true?
  1. (A)The force applied on the particle is constant
  2. (B)The speed of the particle is proportional to time
  3. (C)The distance of the particle from the origin increases linearly with time
  4. (D)The force is conservative

Tests: Turn a given rate of change of kinetic energy into speed, force and position as functions of time.

Show solution
  1. Integrate from rest: K=γt22K = \dfrac{\gamma t^2}{2}, so 12mv2=γt22\dfrac{1}{2}mv^2 = \dfrac{\gamma t^2}{2} and v=γm tv = \sqrt{\dfrac{\gamma}{m}}\,t.
  2. (B) v∝tv \propto t: true.
  3. (A) a=dvdt=γ/ma = \dfrac{dv}{dt} = \sqrt{\gamma/m} is constant, so F=ma=γmF = ma = \sqrt{\gamma m} is constant: true.

    Why: Check: power Fv = √(γm)·√(γ/m)t = γt, matching dK/dt.

  4. (C) x=12at2∝t2x = \dfrac{1}{2}at^2 \propto t^2, not linear in tt: false.
  5. (D) A constant force does path-independent work F ΔxF\,\Delta x; it has the potential U=−FxU = -Fx: true.
AnswerAnswer: (A, B, D)
Ask about this question
Q2

Physics, Question 2 (4 marks)

Viscosity (Newton's law of viscous flow) · +4 / −2
Consider a thin square plate floating on a viscous liquid in a large tank. The height hh of the liquid in the tank is much less than the width of the tank. The floating plate is pulled horizontally with a constant velocity u0u_0. Which of the following statements is (are) true?
  1. (A)The resistive force of liquid on the plate is inversely proportional to hh
  2. (B)The resistive force of liquid on the plate is independent of the area of the plate
  3. (C)The tangential (shear) stress on the floor of the tank increases with u0u_0
  4. (D)The tangential (shear) stress on the plate varies linearly with the viscosity η\eta of the liquid

Tests: Apply Newton's law of viscosity to a plate dragged over a thin liquid layer.

Show solution
  1. Since hh is small, the liquid velocity varies linearly from u0u_0 at the plate to 0 at the floor: velocity gradient u0/hu_0/h.

    Why: Thin layer, steady flow: the shear stress is the same at every depth (Couette flow).

  2. Newton's law of viscosity: shear stress τ=ηu0h\tau = \eta\dfrac{u_0}{h}, force on the plate F=ηAu0hF = \eta A\dfrac{u_0}{h}.
  3. (A) F∝1/hF \propto 1/h: true. (B) F∝AF \propto A: false.
  4. (C) The same stress ηu0/h\eta u_0/h acts on the floor, so it increases with u0u_0: true.
  5. (D) τ=ηu0/h\tau = \eta u_0/h is linear in η\eta: true.
AnswerAnswer: (A, C, D)
Ask about this question
Q3

Physics, Question 3 (4 marks)

Gauss's law (electric flux) · +4 / −2
An infinitely long thin non-conducting wire is parallel to the zz-axis and carries a uniform line charge density λ\lambda. It pierces a thin non-conducting spherical shell of radius RR in such a way that the arc PQPQ subtends an angle 120∘120^\circ at the centre OO of the spherical shell, as shown in the figure. The permittivity of free space is ϵ0\epsilon_0. Which of the following statements is (are) true? (The figure shows the shell with centre OO and the zz-axis drawn dashed through OO; the charged wire runs vertically, parallel to the zz-axis and to one side of OO, entering the shell at PP and leaving at QQ; the radii OPOP and OQOQ, each of length RR, make an angle of 120∘120^\circ at OO.)
  1. (A)The electric flux through the shell is 3Rλ/ϵ0\sqrt{3}R\lambda/\epsilon_0
  2. (B)The zz-component of the electric field is zero at all the points on the surface of the shell
  3. (C)The electric flux through the shell is 2Rλ/ϵ0\sqrt{2}R\lambda/\epsilon_0
  4. (D)The electric field is normal to the surface of the shell at all points

Tests: Find the charge enclosed by a sphere from the chord a line charge cuts, and use the symmetry of a line charge's field.

Show solution
  1. Charge enclosed = λ×\lambda \times (length of wire inside the shell) = λ×PQ\lambda \times PQ.
  2. PQPQ is a chord subtending 120∘120^\circ at OO: PQ=2Rsin⁡60∘=3RPQ = 2R\sin 60^\circ = \sqrt{3}R.
  3. Gauss's law: Φ=3Rλϵ0\Phi = \dfrac{\sqrt{3}R\lambda}{\epsilon_0}. (A) true, (C) false.
  4. (B) The field of an infinite straight line charge points radially away from the line, perpendicular to it. The line is parallel to zz, so Ez=0E_z = 0 everywhere: true.
  5. (D) The field is radial from the wire, not from OO; since the wire does not pass through OO, the field is not along the shell's normal at most points: false.
AnswerAnswer: (A, B)
Ask about this question
Q4

Physics, Question 4 (4 marks)

Ray optics (image formation by a concave mirror) · +4 / −2
A wire is bent in the shape of a right angled triangle and is placed in front of a concave mirror of focal length ff, as shown in the figure. Which of the figures shown in the four options qualitatively represent(s) the shape of the image of the bent wire? (These figures are not to scale.) (The figure shows the concave mirror on the left, facing right, with its principal axis drawn horizontally. The triangle lies in front of the mirror: its base lies on the axis from distance f/2f/2 to distance ff from the pole; its vertical side stands on the axis at distance f/2f/2; the hypotenuse runs from the top of the vertical side down to the axis at distance ff (the focus), making 45∘45^\circ with the axis there, so the vertical side is f/2f/2 tall. In every option the solid horizontal line is the axis and the image is drawn dashed.)
  1. (A)A dashed right triangle standing on the axis: a vertical side on the right and a hypotenuse rising from the axis on the left to the top of that side, at an angle α>45∘\alpha > 45^\circ with the axis
  2. (B)A dashed vertical segment standing on the axis; from its top a dashed straight line slants upward and away to the left, ending in an arrow marked ∞\infty
  3. (C)A dashed right triangle standing on the axis: a vertical side on the right and a hypotenuse rising from the axis on the left to the top of that side, at an angle 0<α<45∘0 < \alpha < 45^\circ with the axis
  4. (D)A dashed vertical segment standing on the axis; from its top a dashed straight line runs horizontally to the left, parallel to the axis, ending in an arrow marked ∞\infty

Tests: Image an extended object lying between the pole and the focus of a concave mirror, point by point.

Show solution
  1. Cartesian signs, pole at the origin, light travelling right to left: object distances in front are negative, focal length −f-f. Mirror formula 1v+1u=−1f\dfrac{1}{v} + \dfrac{1}{u} = -\dfrac{1}{f}, magnification m=−vum = -\dfrac{v}{u}.
  2. Vertical side (u=−f/2u = -f/2, height f/2f/2): 1v=−1f+2f=1f\dfrac{1}{v} = -\dfrac{1}{f} + \dfrac{2}{f} = \dfrac{1}{f}, so v=+fv = +f (virtual, a distance ff behind the mirror), m=2m = 2 (erect). Its image is a vertical segment of height ff standing on the axis.
  3. Base (on the axis from f/2f/2 to ff): the end at f/2f/2 images at ff behind the mirror, the end at the focus images at infinity. So the base images onto the axis from ff behind the mirror out to infinity.
  4. Hypotenuse: a point at distance xx in front (f/2≤x≤ff/2 \le x \le f) has height y=f−xy = f - x. Then 1v=−1f+1x\dfrac{1}{v} = -\dfrac{1}{f} + \dfrac{1}{x} gives v=xff−xv = \dfrac{xf}{f - x} behind the mirror, and m=ff−xm = \dfrac{f}{f - x}. Image height =m y=ff−x(f−x)=f= m\,y = \dfrac{f}{f - x}(f - x) = f, the same for every point.
  5. Ray check: the hypotenuse lies on a line through the focus FF. A ray leaving any point of it along that line, toward the mirror, travels as if it came from FF, so it reflects parallel to the axis at the height where the line meets the mirror, y=fy = f. Every image point lies on that reflected ray (extended behind the mirror), i.e. on the horizontal line y=fy = f.

    Why: A line through the focus images onto a line parallel to the axis.

  6. So the image is a vertical segment of height ff at distance ff behind the mirror, with a horizontal line at height ff running from its top to infinity behind the mirror (and the base image along the axis). That is figure (D). (B) draws the top line slanting, which would need the image height to grow with distance; (A) and (C) are closed triangles, impossible since the wire touches the focus, whose image is at infinity.
AnswerAnswer: (D) a vertical segment with a horizontal line from its top running to infinity
Ask about this question
Q5

Physics, Question 5 (4 marks)

Radioactivity (alpha and beta decay) · +4 / −2
In a radioactive decay chain, 90232Th\mathrm{{}^{232}_{90}Th} nucleus decays to 82212Pb\mathrm{{}^{212}_{82}Pb} nucleus. Let NαN_\alpha and NβN_\beta be the number of α\alpha and β−\beta^- particles, respectively, emitted in this decay process. Which of the following statements is (are) true?
  1. (A)Nα=5N_\alpha = 5
  2. (B)Nα=6N_\alpha = 6
  3. (C)Nβ=2N_\beta = 2
  4. (D)Nβ=4N_\beta = 4

Tests: Count alpha and beta-minus emissions from the changes in mass number and atomic number.

Show solution
  1. Only α\alpha decay changes the mass number, by 4 each: Nα=232−2124=5N_\alpha = \dfrac{232 - 212}{4} = 5. (A) true, (B) false.
  2. Five α\alpha lower ZZ by 10: 90−10=8090 - 10 = 80. The final ZZ is 82, so Nβ=2N_\beta = 2 (β−\beta^- raises ZZ by 1). (C) true, (D) false.
AnswerAnswer: (A, C)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Sound waves (resonance tube) · +4 / −2
In an experiment to measure the speed of sound by a resonating air column, a tuning fork of frequency 500 Hz500\ \mathrm{Hz} is used. The length of the air column is varied by changing the level of water in the resonance tube. Two successive resonances are heard at air columns of length 50.7 cm50.7\ \mathrm{cm} and 83.9 cm83.9\ \mathrm{cm}. Which of the following statements is (are) true?
  1. (A)The speed of sound determined from this experiment is 332 m s−1332\ \mathrm{m\,s^{-1}}
  2. (B)The end correction in this experiment is 0.9 cm0.9\ \mathrm{cm}
  3. (C)The wavelength of the sound wave is 66.4 cm66.4\ \mathrm{cm}
  4. (D)The resonance at 50.7 cm50.7\ \mathrm{cm} corresponds to the fundamental harmonic

Tests: Get the wavelength from two successive resonance lengths and test the end correction and harmonic number.

Show solution
  1. Successive resonances of a closed pipe differ by λ/2\lambda/2: λ=2(83.9−50.7)=66.4 cm\lambda = 2(83.9 - 50.7) = 66.4\ \mathrm{cm}. (C) true.

    Why: The end correction cancels in the difference.

  2. v=fλ=500×0.664=332 m s−1v = f\lambda = 500 \times 0.664 = 332\ \mathrm{m\,s^{-1}}. (A) true.
  3. Resonances occur at L+e=λ/4,3λ/4,5λ/4,⋯=16.6,49.8,83.0 cmL + e = \lambda/4, 3\lambda/4, 5\lambda/4, \dots = 16.6, 49.8, 83.0\ \mathrm{cm}. The pair 50.7,83.950.7, 83.9 fits 3λ/43\lambda/4 and 5λ/45\lambda/4, so e=49.8−50.7=−0.9 cme = 49.8 - 50.7 = -0.9\ \mathrm{cm}.
  4. (B) An end correction is a positive length added at the open end; here it comes out as −0.9 cm-0.9\ \mathrm{cm}, not 0.9 cm0.9\ \mathrm{cm} (that would need resonances at 48.9 cm and 82.1 cm): false.
  5. (D) The fundamental would be at L=λ/4−e≈17.5 cmL = \lambda/4 - e \approx 17.5\ \mathrm{cm}; 50.7 cm is the second resonance (3λ/43\lambda/4, the third harmonic): false.
AnswerAnswer: (A, C)
Ask about this question

Physics, Section 2: 8 questions, the answer is a numerical value (truncated or rounded off to the second decimal place): +3 if only the correct value is entered, 0 in all other cases

Q7

Physics, Question 7 (3 marks)

Kinematics (velocity as a function of time) · +3
A solid horizontal surface is covered with a thin layer of oil. A rectangular block of mass m=0.4 kgm = 0.4\ \mathrm{kg} is at rest on this surface. An impulse of 1.0 N s1.0\ \mathrm{N\,s} is applied to the block at time t=0t = 0 so that it starts moving along the xx-axis with a velocity v(t)=v0e−t/τv(t) = v_0e^{-t/\tau}, where v0v_0 is a constant and τ=4 s\tau = 4\ \mathrm{s}. The displacement of the block, in metres, at t=τt = \tau is ______. Take e−1=0.37e^{-1} = 0.37.

Tests: Find the initial speed from an impulse, then integrate an exponentially decaying velocity.

Show solution
  1. Impulse = change in momentum: v0=1.00.4=2.5 m s−1v_0 = \dfrac{1.0}{0.4} = 2.5\ \mathrm{m\,s^{-1}}.
  2. x(t)=∫0tv0e−t′/τ dt′=v0τ (1−e−t/τ)x(t) = \displaystyle\int_0^t v_0e^{-t'/\tau}\,dt' = v_0\tau\,(1 - e^{-t/\tau}).
  3. At t=τt = \tau: x=2.5×4×(1−0.37)=10×0.63=6.30 mx = 2.5 \times 4 \times (1 - 0.37) = 10 \times 0.63 = 6.30\ \mathrm{m}.
AnswerAnswer: 6.30
Ask about this question
Q8

Physics, Question 8 (3 marks)

Projectile motion (bounce with energy loss) · +3
A ball is projected from the ground at an angle of 45∘45^\circ with the horizontal surface. It reaches a maximum height of 120 m120\ \mathrm{m} and returns to the ground. Upon hitting the ground for the first time, it loses half of its kinetic energy. Immediately after the bounce, the velocity of the ball makes an angle of 30∘30^\circ with the horizontal surface. The maximum height it reaches after the bounce, in metres, is ______.

Tests: Relate maximum height to launch speed and angle before and after a lossy bounce.

Show solution
  1. Before the bounce: H=u2sin⁡245∘2g=u24g=120H = \dfrac{u^2\sin^2 45^\circ}{2g} = \dfrac{u^2}{4g} = 120, so u2=480gu^2 = 480g. It lands with the same speed uu.
  2. Half the kinetic energy is lost: v2=u22=240gv^2 = \dfrac{u^2}{2} = 240g.
  3. After the bounce at 30∘30^\circ: H′=v2sin⁡230∘2g=240g×1/42g=30 mH' = \dfrac{v^2\sin^2 30^\circ}{2g} = \dfrac{240g \times 1/4}{2g} = 30\ \mathrm{m}.
AnswerAnswer: 30.00
Ask about this question
Q9

Physics, Question 9 (3 marks)

Motion of a charge in a time-varying electric field · +3
A particle, of mass 10−3 kg10^{-3}\ \mathrm{kg} and charge 1.0 C1.0\ \mathrm{C}, is initially at rest. At time t=0t = 0, the particle comes under the influence of an electric field E⃗(t)=E0sin⁡ωt i^\vec{E}(t) = E_0\sin\omega t\,\hat{i}, where E0=1.0 N C−1E_0 = 1.0\ \mathrm{N\,C^{-1}} and ω=103 rad s−1\omega = 10^3\ \mathrm{rad\,s^{-1}}. Consider the effect of only the electrical force on the particle. Then the maximum speed, in m s−1\mathrm{m\,s^{-1}}, attained by the particle at subsequent times is ______.

Tests: Integrate a sinusoidal force from rest, keeping the constant of integration.

Show solution
  1. mdvdt=qE0sin⁡ωtm\dfrac{dv}{dt} = qE_0\sin\omega t.
  2. Integrate from rest: v=qE0mω(1−cos⁡ωt)v = \dfrac{qE_0}{m\omega}(1 - \cos\omega t).

    Why: The velocity never changes sign; it oscillates between 0 and its maximum.

  3. Maximum when cos⁡ωt=−1\cos\omega t = -1: vmax=2qE0mω=2×1.0×1.010−3×103=2 m s−1v_{max} = \dfrac{2qE_0}{m\omega} = \dfrac{2 \times 1.0 \times 1.0}{10^{-3} \times 10^3} = 2\ \mathrm{m\,s^{-1}}.
AnswerAnswer: 2.00
Ask about this question
Q10

Physics, Question 10 (3 marks)

Moving coil galvanometer (conversion to ammeter) · +3
A moving coil galvanometer has 50 turns and each turn has an area 2×10−4 m22 \times 10^{-4}\ \mathrm{m^2}. The magnetic field produced by the magnet inside the galvanometer is 0.02 T0.02\ \mathrm{T}. The torsional constant of the suspension wire is 10−4 N m rad−110^{-4}\ \mathrm{N\,m\,rad^{-1}}. When a current flows through the galvanometer, a full scale deflection occurs if the coil rotates by 0.2 rad0.2\ \mathrm{rad}. The resistance of the coil of the galvanometer is 50 Ω50\ \Omega. This galvanometer is to be converted into an ammeter capable of measuring current in the range 0−1.0 A0 - 1.0\ \mathrm{A}. For this purpose, a shunt resistance is to be added in parallel to the galvanometer. The value of this shunt resistance, in ohms, is ______.

Tests: Find the full-scale current of a galvanometer from its torque balance, then size the shunt.

Show solution
  1. Equilibrium of torques: NBAIg=kθNBAI_g = k\theta, so Ig=kθNBA=10−4×0.250×0.02×2×10−4=2×10−52×10−4=0.1 AI_g = \dfrac{k\theta}{NBA} = \dfrac{10^{-4} \times 0.2}{50 \times 0.02 \times 2 \times 10^{-4}} = \dfrac{2 \times 10^{-5}}{2 \times 10^{-4}} = 0.1\ \mathrm{A}.
  2. Shunt and coil share the voltage: IgG=(I−Ig)SI_gG = (I - I_g)S, so S=0.1×501.0−0.1=509=5.555… ΩS = \dfrac{0.1 \times 50}{1.0 - 0.1} = \dfrac{50}{9} = 5.555\ldots\ \Omega.
  3. Rounded to two decimals: 5.56. The paper allows truncation as well, so 5.55 is also accepted.
AnswerAnswer: 5.56 (5.55 by truncation is also accepted)
Ask about this question
Q11

Physics, Question 11 (3 marks)

Elasticity (Young's modulus) with vernier scale · +3
A steel wire of diameter 0.5 mm0.5\ \mathrm{mm} and Young's modulus 2×1011 N m−22 \times 10^{11}\ \mathrm{N\,m^{-2}} carries a load of mass MM. The length of the wire with the load is 1.0 m1.0\ \mathrm{m}. A vernier scale with 10 divisions is attached to the end of this wire. Next to the steel wire is a reference wire to which a main scale, of least count 1.0 mm1.0\ \mathrm{mm}, is attached. The 10 divisions of the vernier scale correspond to 9 divisions of the main scale. Initially, the zero of vernier scale coincides with the zero of main scale. If the load on the steel wire is increased by 1.2 kg1.2\ \mathrm{kg}, the vernier scale division which coincides with a main scale division is ______. Take g=10 m s−2g = 10\ \mathrm{m\,s^{-2}} and π=3.2\pi = 3.2.

Tests: Find a small extension from Young's modulus and read it on a vernier scale.

Show solution
  1. Extra extension ΔL=FLAY\Delta L = \dfrac{FL}{AY} with F=1.2×10=12 NF = 1.2 \times 10 = 12\ \mathrm{N}, A=πr2=3.2×(0.25×10−3)2=2×10−7 m2A = \pi r^2 = 3.2 \times (0.25 \times 10^{-3})^2 = 2 \times 10^{-7}\ \mathrm{m^2}.
  2. ΔL=12×1.02×10−7×2×1011=124×104=3×10−4 m=0.3 mm\Delta L = \dfrac{12 \times 1.0}{2 \times 10^{-7} \times 2 \times 10^{11}} = \dfrac{12}{4 \times 10^4} = 3 \times 10^{-4}\ \mathrm{m} = 0.3\ \mathrm{mm}.
  3. Vernier least count = 1 MSD − 1 VSD =1.0−0.9=0.1 mm= 1.0 - 0.9 = 0.1\ \mathrm{mm}.
  4. The vernier zero moves 0.3 mm0.3\ \mathrm{mm} past the main-scale zero, so division 0.3/0.1=30.3/0.1 = 3 of the vernier coincides with a main-scale division.
AnswerAnswer: 3.00
Ask about this question
Q12

Physics, Question 12 (3 marks)

Thermodynamics (adiabatic process) · +3
One mole of a monatomic ideal gas undergoes an adiabatic expansion in which its volume becomes eight times its initial value. If the initial temperature of the gas is 100 K100\ \mathrm{K} and the universal gas constant R=8.0 J mol−1K−1R = 8.0\ \mathrm{J\,mol^{-1}K^{-1}}, the decrease in its internal energy, in Joule, is ______.

Tests: Use the adiabatic relation to get the final temperature, then the change in internal energy.

Show solution
  1. Adiabatic: TVγ−1=TV^{\gamma - 1} = constant with γ=5/3\gamma = 5/3, so T2=T1(V1V2)2/3=100×(18)2/3=25 KT_2 = T_1\left(\dfrac{V_1}{V_2}\right)^{2/3} = 100 \times \left(\dfrac{1}{8}\right)^{2/3} = 25\ \mathrm{K}.
  2. Decrease in internal energy =nCVΔT=1×32×8.0×(100−25)=900 J= nC_V\Delta T = 1 \times \dfrac{3}{2} \times 8.0 \times (100 - 25) = 900\ \mathrm{J}.
AnswerAnswer: 900.00
Ask about this question
Q13

Physics, Question 13 (3 marks)

Photoelectric effect (force due to electrons) · +3
In a photoelectric experiment a parallel beam of monochromatic light with power of 200 W200\ \mathrm{W} is incident on a perfectly absorbing cathode of work function 6.25 eV6.25\ \mathrm{eV}. The frequency of light is just above the threshold frequency so that the photoelectrons are emitted with negligible kinetic energy. Assume that the photoelectron emission efficiency is 100%100\%. A potential difference of 500 V500\ \mathrm{V} is applied between the cathode and the anode. All the emitted electrons are incident normally on the anode and are absorbed. The anode experiences a force F=n×10−4 NF = n \times 10^{-4}\ \mathrm{N} due to the impact of the electrons. The value of nn is ______. Mass of the electron me=9×10−31 kgm_e = 9 \times 10^{-31}\ \mathrm{kg} and 1.0 eV=1.6×10−19 J1.0\ \mathrm{eV} = 1.6 \times 10^{-19}\ \mathrm{J}.

Tests: Count photoelectrons per second from the beam power, then find the force from their momentum flux.

Show solution
  1. Photon energy is just the work function, 6.25 eV=10−18 J6.25\ \mathrm{eV} = 10^{-18}\ \mathrm{J}. Photons (and electrons) per second: N=20010−18=2×1020 s−1N = \dfrac{200}{10^{-18}} = 2 \times 10^{20}\ \mathrm{s^{-1}}.
  2. Each electron gains 500 eV500\ \mathrm{eV}: momentum p=2meK=2×9×10−31×500×1.6×10−19=1.44×10−46=1.2×10−23 kg m s−1p = \sqrt{2m_eK} = \sqrt{2 \times 9 \times 10^{-31} \times 500 \times 1.6 \times 10^{-19}} = \sqrt{1.44 \times 10^{-46}} = 1.2 \times 10^{-23}\ \mathrm{kg\,m\,s^{-1}}.
  3. Electrons are absorbed, so each delivers its full momentum: F=Np=2×1020×1.2×10−23=2.4×10−3=24×10−4 NF = Np = 2 \times 10^{20} \times 1.2 \times 10^{-23} = 2.4 \times 10^{-3} = 24 \times 10^{-4}\ \mathrm{N}.
AnswerAnswer: 24.00
Ask about this question
Q14

Physics, Question 14 (3 marks)

Bohr model (hydrogen-like atoms) · +3
Consider a hydrogen-like ionized atom with atomic number ZZ with a single electron. In the emission spectrum of this atom, the photon emitted in the n=2n = 2 to n=1n = 1 transition has energy 74.8 eV74.8\ \mathrm{eV} higher than the photon emitted in the n=3n = 3 to n=2n = 2 transition. The ionization energy of the hydrogen atom is 13.6 eV13.6\ \mathrm{eV}. The value of ZZ is ______.

Tests: Use the Z-squared scaling of hydrogen-like energy levels to find the atomic number.

Show solution
  1. E2→1=13.6Z2(1−14)=13.6Z2⋅34E_{2 \rightarrow 1} = 13.6Z^2\left(1 - \dfrac{1}{4}\right) = 13.6Z^2 \cdot \dfrac{3}{4}, E3→2=13.6Z2(14−19)=13.6Z2⋅536E_{3 \rightarrow 2} = 13.6Z^2\left(\dfrac{1}{4} - \dfrac{1}{9}\right) = 13.6Z^2 \cdot \dfrac{5}{36}.
  2. Difference: 13.6Z2(2736−536)=13.6Z2⋅1118=74.813.6Z^2\left(\dfrac{27}{36} - \dfrac{5}{36}\right) = 13.6Z^2 \cdot \dfrac{11}{18} = 74.8.
  3. Z2=74.8×1813.6×11=1346.4149.6=9Z^2 = \dfrac{74.8 \times 18}{13.6 \times 11} = \dfrac{1346.4}{149.6} = 9, so Z=3Z = 3.
AnswerAnswer: 3.00
Ask about this question

Physics, Section 3: 4 List-I / List-II matching questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Physics, Question 15 (3 marks)

Electric field of charge distributions · +3 / −1
The electric field EE is measured at a point P(0,0,d)P(0, 0, d) generated due to various charge distributions and the dependence of EE on dd is found to be different for different charge distributions. List-I contains different relations between EE and dd. List-II describes different electric charge distributions, along with their locations. Match the functions in List-I with the related charge distributions in List-II.
List-IList-II
(P) EE is independent of dd(1) A point charge QQ at the origin
(Q) E∝1dE \propto \dfrac{1}{d}(2) A small dipole with point charges QQ at (0,0,l)(0, 0, l) and −Q-Q at (0,0,−l)(0, 0, -l). Take 2l≪d2l \ll d
(R) E∝1d2E \propto \dfrac{1}{d^2}(3) An infinite line charge coincident with the xx-axis, with uniform linear charge density λ\lambda
(S) E∝1d3E \propto \dfrac{1}{d^3}(4) Two infinite wires carrying uniform linear charge density parallel to the xx-axis. The one along (y=0y = 0, z=lz = l) has a charge density +λ+\lambda and the one along (y=0y = 0, z=−lz = -l) has a charge density −λ-\lambda. Take 2l≪d2l \ll d
(5) Infinite plane charge coincident with the xy-plane with uniform surface charge density
  1. (A)P →\rightarrow 5; Q →\rightarrow 3, 4; R →\rightarrow 1; S →\rightarrow 2
  2. (B)P →\rightarrow 5; Q →\rightarrow 3; R →\rightarrow 1, 4; S →\rightarrow 2
  3. (C)P →\rightarrow 5; Q →\rightarrow 3; R →\rightarrow 1, 2; S →\rightarrow 4
  4. (D)P →\rightarrow 4; Q →\rightarrow 2, 3; R →\rightarrow 1; S →\rightarrow 5

Tests: Recall how the field of each standard charge distribution falls off with distance.

Show solution
  1. (1) Point charge: E=Q4πϵ0d2∝1/d2E = \dfrac{Q}{4\pi\epsilon_0 d^2} \propto 1/d^2.
  2. (2) Axial point of a short dipole: E=2p4πϵ0d3∝1/d3E = \dfrac{2p}{4\pi\epsilon_0 d^3} \propto 1/d^3.
  3. (3) Infinite line charge at perpendicular distance dd: E=λ2πϵ0d∝1/dE = \dfrac{\lambda}{2\pi\epsilon_0 d} \propto 1/d.
  4. (4) The two lines at distances d−ld - l and d+ld + l: E=λ2πϵ0(1d−l−1d+l)=λ2πϵ0⋅2ld2−l2≈λlπϵ0d2∝1/d2E = \dfrac{\lambda}{2\pi\epsilon_0}\left(\dfrac{1}{d - l} - \dfrac{1}{d + l}\right) = \dfrac{\lambda}{2\pi\epsilon_0}\cdot\dfrac{2l}{d^2 - l^2} \approx \dfrac{\lambda l}{\pi\epsilon_0 d^2} \propto 1/d^2.

    Why: A line dipole falls one power faster than a line charge, just as a point dipole falls one power faster than a point charge.

  5. (5) Infinite plane: E=σ2ϵ0E = \dfrac{\sigma}{2\epsilon_0}, independent of dd.
  6. So P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 1, 4, S →\rightarrow 2: option (B).
AnswerAnswer: (B) P →\rightarrow 5; Q →\rightarrow 3; R →\rightarrow 1, 4; S →\rightarrow 2
Ask about this question
Q16

Physics, Question 16 (3 marks)

Gravitation (satellite orbits) · +3 / −1
A planet of mass MM, has two natural satellites with masses m1m_1 and m2m_2. The radii of their circular orbits are R1R_1 and R2R_2 respectively. Ignore the gravitational force between the satellites. Define v1v_1, L1L_1, K1K_1 and T1T_1 to be, respectively, the orbital speed, angular momentum, kinetic energy and time period of revolution of satellite 1; and v2v_2, L2L_2, K2K_2 and T2T_2 to be the corresponding quantities of satellite 2. Given m1/m2=2m_1/m_2 = 2 and R1/R2=1/4R_1/R_2 = 1/4, match the ratios in List-I to the numbers in List-II.
List-IList-II
(P) v1v2\dfrac{v_1}{v_2}(1) 18\dfrac{1}{8}
(Q) L1L2\dfrac{L_1}{L_2}(2) 1
(R) K1K2\dfrac{K_1}{K_2}(3) 2
(S) T1T2\dfrac{T_1}{T_2}(4) 8
  1. (A)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 3
  2. (B)P →\rightarrow 3; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 1
  3. (C)P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 1; S →\rightarrow 4
  4. (D)P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 4; S →\rightarrow 1

Tests: Scale orbital speed, angular momentum, kinetic energy and period with orbit radius and satellite mass.

Show solution
  1. (P) v=GM/Rv = \sqrt{GM/R}: v1v2=R2R1=4=2\dfrac{v_1}{v_2} = \sqrt{\dfrac{R_2}{R_1}} = \sqrt{4} = 2. P →\rightarrow 3.
  2. (Q) L=mvRL = mvR: L1L2=2×2×14=1\dfrac{L_1}{L_2} = 2 \times 2 \times \dfrac{1}{4} = 1. Q →\rightarrow 2.
  3. (R) K=12mv2K = \dfrac{1}{2}mv^2: K1K2=2×22=8\dfrac{K_1}{K_2} = 2 \times 2^2 = 8. R →\rightarrow 4.
  4. (S) T∝R3/2T \propto R^{3/2}: T1T2=(14)3/2=18\dfrac{T_1}{T_2} = \left(\dfrac{1}{4}\right)^{3/2} = \dfrac{1}{8}. S →\rightarrow 1.

    Why: Kepler's third law; T does not depend on the satellite's mass.

AnswerAnswer: (B) P →\rightarrow 3; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 1
Ask about this question
Q17

Physics, Question 17 (3 marks)

Thermodynamic processes (PV diagram) · +3 / −1
One mole of a monatomic ideal gas undergoes four thermodynamic processes as shown schematically in the PVPV-diagram below. Among these four processes, one is isobaric, one is isochoric, one is isothermal and one is adiabatic. Match the processes mentioned in List-I with the corresponding statements in List-II. (The figure shows, on PP against VV axes, the point (V0,3P0)(V_0, 3P_0) joined to others: process II is a horizontal line at 3P03P_0 from V0V_0 to 3V03V_0, arrow to the right; process III is a vertical line at 3V03V_0 from 3P03P_0 down to P0P_0, arrow downward; process IV is a curve from (3V0,P0)(3V_0, P_0) up to (V0,3P0)(V_0, 3P_0), arrow toward (V0,3P0)(V_0, 3P_0); process I is a steeper curve from a point on the P0P_0 level between V0V_0 and 3V03V_0 up to (V0,3P0)(V_0, 3P_0), arrow toward (V0,3P0)(V_0, 3P_0).)
List-IList-II
(P) In process I(1) Work done by the gas is zero
(Q) In process II(2) Temperature of the gas remains unchanged
(R) In process III(3) No heat is exchanged between the gas and its surroundings
(S) In process IV(4) Work done by the gas is 6P0V06P_0V_0
  1. (A)P →\rightarrow 4; Q →\rightarrow 3; R →\rightarrow 1; S →\rightarrow 2
  2. (B)P →\rightarrow 1; Q →\rightarrow 3; R →\rightarrow 2; S →\rightarrow 4
  3. (C)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 1; S →\rightarrow 2
  4. (D)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 1

Tests: Identify isobaric, isochoric, isothermal and adiabatic processes on a PV diagram.

Show solution
  1. II is at constant pressure 3P03P_0 (isobaric): W=3P0(3V0−V0)=6P0V0W = 3P_0(3V_0 - V_0) = 6P_0V_0. Q →\rightarrow 4.
  2. III is at constant volume 3V03V_0 (isochoric): W=0W = 0. R →\rightarrow 1.
  3. IV joins (3V0,P0)(3V_0, P_0) and (V0,3P0)(V_0, 3P_0), which have the same PV=3P0V0PV = 3P_0V_0, hence the same TT: it is the isothermal. S →\rightarrow 2.
  4. I is the remaining, steeper curve: the adiabatic, Q=0Q = 0. P →\rightarrow 3.

    Why: An adiabat is steeper than an isotherm through the same point (slope −γP/V vs −P/V); from 3P0 down to P0 it ends at V0·3^(3/5) ≈ 1.93V0, between V0 and 3V0 as drawn.

AnswerAnswer: (C) P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 1; S →\rightarrow 2
Ask about this question
Q18

Physics, Question 18 (3 marks)

Conservation laws (momentum, angular momentum, energy) · +3 / −1
In the List-I below, four different paths of a particle are given as functions of time. In these functions, α\alpha and β\beta are positive constants of appropriate dimensions and α≠β\alpha \ne \beta. In each case, the force acting on the particle is either zero or conservative. In List-II, five physical quantities of the particle are mentioned: p⃗\vec{p} is the linear momentum, L⃗\vec{L} is the angular momentum about the origin, KK is the kinetic energy, UU is the potential energy and EE is the total energy. Match each path in List-I with those quantities in List-II, which are conserved for that path.
List-IList-II
(P) r⃗(t)=αt i^+βt j^\vec{r}(t) = \alpha t\,\hat{i} + \beta t\,\hat{j}(1) p⃗\vec{p}
(Q) r⃗(t)=αcos⁡ωt i^+βsin⁡ωt j^\vec{r}(t) = \alpha\cos\omega t\,\hat{i} + \beta\sin\omega t\,\hat{j}(2) L⃗\vec{L}
(R) r⃗(t)=α(cos⁡ωt i^+sin⁡ωt j^)\vec{r}(t) = \alpha(\cos\omega t\,\hat{i} + \sin\omega t\,\hat{j})(3) KK
(S) r⃗(t)=αt i^+β2t2 j^\vec{r}(t) = \alpha t\,\hat{i} + \dfrac{\beta}{2}t^2\,\hat{j}(4) UU
(5) EE
  1. (A)P →\rightarrow 1, 2, 3, 4, 5; Q →\rightarrow 2, 5; R →\rightarrow 2, 3, 4, 5; S →\rightarrow 5
  2. (B)P →\rightarrow 1, 2, 3, 4, 5; Q →\rightarrow 3, 5; R →\rightarrow 2, 3, 4, 5; S →\rightarrow 2, 5
  3. (C)P →\rightarrow 2, 3, 4; Q →\rightarrow 5; R →\rightarrow 1, 2, 4; S →\rightarrow 2, 5
  4. (D)P →\rightarrow 1, 2, 3, 5; Q →\rightarrow 2, 5; R →\rightarrow 2, 3, 4, 5; S →\rightarrow 2, 5

Tests: Decide which quantities are conserved from a particle's path by finding its velocity, force and angular momentum.

Show solution
  1. The force is either zero or conservative, so EE is conserved in every case. L⃗\vec{L} about the origin is conserved when the force is zero or points along r⃗\vec{r} (central).
  2. (P) v⃗=αi^+βj^\vec{v} = \alpha\hat{i} + \beta\hat{j} is constant, so F⃗=0\vec{F} = 0: p⃗\vec{p}, KK, UU (no force, constant UU) and EE are conserved; L⃗=mr⃗×v⃗=m(αtβ−βtα)k^=0\vec{L} = m\vec{r} \times \vec{v} = m(\alpha t\beta - \beta t\alpha)\hat{k} = 0, also constant. P →\rightarrow 1, 2, 3, 4, 5.
  3. (Q) a⃗=−ω2r⃗\vec{a} = -\omega^2\vec{r}: a central, spring-like force, so L⃗\vec{L} and EE are conserved. The speed ωα2sin⁡2ωt+β2cos⁡2ωt\omega\sqrt{\alpha^2\sin^2\omega t + \beta^2\cos^2\omega t} varies (as α≠β\alpha \ne \beta), so KK and UU change and p⃗\vec{p} is not constant. Q →\rightarrow 2, 5.
  4. (R) Uniform circular motion: a⃗=−ω2r⃗\vec{a} = -\omega^2\vec{r} (central), constant speed αω\alpha\omega and constant rr. L⃗\vec{L}, KK, UU and EE are conserved; p⃗\vec{p} changes direction. R →\rightarrow 2, 3, 4, 5.
  5. (S) a⃗=βj^\vec{a} = \beta\hat{j}, a constant force (like gravity), not central about the origin. L⃗=m(xvy−yvx)k^=m(αt⋅βt−βt22α)k^=mαβt22k^\vec{L} = m(xv_y - yv_x)\hat{k} = m\left(\alpha t \cdot \beta t - \dfrac{\beta t^2}{2}\alpha\right)\hat{k} = \dfrac{m\alpha\beta t^2}{2}\hat{k} grows with time; KK, UU, p⃗\vec{p} change. Only EE. S →\rightarrow 5.
  6. So option (A).
AnswerAnswer: (A) P →\rightarrow 1, 2, 3, 4, 5; Q →\rightarrow 2, 5; R →\rightarrow 2, 3, 4, 5; S →\rightarrow 5
Ask about this question

Chemistry, Section 1: 6 questions, one or more than one option correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct but only three are chosen; +2 if three or more options are correct but only two are chosen, both correct; +1 if two or more options are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Chemistry, Question 1 (4 marks)

Coordination compounds (isomerism, magnetism, colour) · +4 / −2
The correct option(s) regarding the complex [Co(en)(NH3)3(H2O)]3+\mathrm{[Co(en)(NH_3)_3(H_2O)]^{3+}} (en=H2NCH2CH2NH2\mathrm{en = H_2NCH_2CH_2NH_2}) is (are)
  1. (A)It has two geometrical isomers
  2. (B)It will have three geometrical isomers if bidentate ‘en’ is replaced by two cyanide ligands
  3. (C)It is paramagnetic
  4. (D)It absorbs light at longer wavelength as compared to [Co(en)(NH3)4]3+\mathrm{[Co(en)(NH_3)_4]^{3+}}

Tests: Count geometrical isomers of mixed-ligand octahedral complexes and link field strength to colour.

Show solution
  1. The complex is octahedral of type M(AA)a3b\mathrm{M(AA)a_3b} (AA = en, a = NH3\mathrm{NH_3}, b = H2O\mathrm{H_2O}). The en must span two cis positions.
  2. (A) True. With en fixed on two cis sites, H2O\mathrm{H_2O} is either trans to an en nitrogen (the three NH3\mathrm{NH_3} then sit fac) or trans to an NH3\mathrm{NH_3} (the three NH3\mathrm{NH_3} sit mer). Two geometrical isomers.

    Why: Both arrangements have a mirror plane, so neither is optically active; the count is just 2.

  3. (B) True. Replacing en by two CN−\mathrm{CN^-} gives [Co(CN)2(NH3)3(H2O)]\mathrm{[Co(CN)_2(NH_3)_3(H_2O)]}, type Ma3bc2\mathrm{Ma_3bc_2} (a = NH3\mathrm{NH_3}, b = H2O\mathrm{H_2O}, c = CN−\mathrm{CN^-}): the three NH3\mathrm{NH_3} fac (one isomer) or mer with the two CN−\mathrm{CN^-} either trans to each other or cis. Three geometrical isomers.
  4. (C) False. Co3+\mathrm{Co^{3+}} is 3d63d^6; with N-donor ligands (en, NH3\mathrm{NH_3}) it is low spin t2g6eg0t_{2g}^6e_g^0, so no unpaired electrons: diamagnetic.
  5. (D) True. Going from [Co(en)(NH3)4]3+\mathrm{[Co(en)(NH_3)_4]^{3+}} to [Co(en)(NH3)3(H2O)]3+\mathrm{[Co(en)(NH_3)_3(H_2O)]^{3+}} swaps one NH3\mathrm{NH_3} for the weaker-field H2O\mathrm{H_2O}, so Δo\Delta_o falls and the absorbed light has lower energy, i.e. longer wavelength.

    Why: Spectrochemical series: H2O < NH3 < en.

AnswerAnswer: (A), (B), (D)
Ask about this question
Q2

Chemistry, Question 2 (4 marks)

Qualitative analysis (cations) · +4 / −2
The correct option(s) to distinguish nitrate salts of Mn2+\mathrm{Mn^{2+}} and Cu2+\mathrm{Cu^{2+}} taken separately is (are)
  1. (A)Mn2+\mathrm{Mn^{2+}} shows the characteristic green colour in the flame test
  2. (B)Only Cu2+\mathrm{Cu^{2+}} shows the formation of precipitate by passing H2S\mathrm{H_2S} in acidic medium
  3. (C)Only Mn2+\mathrm{Mn^{2+}} shows the formation of precipitate by passing H2S\mathrm{H_2S} in faintly basic medium
  4. (D)Cu2+/Cu\mathrm{Cu^{2+}/Cu} has higher reduction potential than Mn2+/Mn\mathrm{Mn^{2+}/Mn} (measured under similar conditions)

Tests: Separate Cu2+ and Mn2+ using sulphide precipitation and electrode potentials.

Show solution
  1. (A) False. Manganese salts give no characteristic flame colour; the green (blue-green) flame is shown by copper.
  2. (B) True. CuS has a very small KspK_{sp}, so it precipitates even when H+\mathrm{H^+} suppresses the sulphide ion (group II). MnS has a much larger KspK_{sp} and does not precipitate in acid.

    Why: Acid lowers [S2−]; only the least soluble sulphides still exceed Ksp.

  3. (C) False. In faintly basic medium [S2−][\mathrm{S^{2-}}] is high, so MnS (buff/pink) precipitates, but CuS (black) precipitates too. 'Only Mn2+\mathrm{Mn^{2+}}' is wrong.
  4. (D) True. E∘(Cu2+/Cu)=+0.34E^\circ(\mathrm{Cu^{2+}/Cu}) = +0.34 V, while E∘(Mn2+/Mn)=−1.18E^\circ(\mathrm{Mn^{2+}/Mn}) = -1.18 V.
AnswerAnswer: (B), (D)
Ask about this question
Q3

Chemistry, Question 3 (4 marks)

Aromatic compounds (nitration, diazonium salts) · +4 / −2
Aniline reacts with mixed acid (conc. HNO3\mathrm{HNO_3} and conc. H2SO4\mathrm{H_2SO_4}) at 288 K to give P (51 %), Q (47%) and R (2%). The major product(s) of the following reaction sequence is (are) (The scheme shows: R treated with 1) Ac2O\mathrm{Ac_2O}, pyridine; 2) Br2\mathrm{Br_2}, CH3CO2H\mathrm{CH_3CO_2H}; 3) H3O+\mathrm{H_3O^+}; 4) NaNO2\mathrm{NaNO_2}, HCl / 273–278 K; 5) EtOH, Δ\Delta gives S; S treated with 1) Sn/HCl; 2) Br2/H2O\mathrm{Br_2/H_2O} (excess); 3) NaNO2\mathrm{NaNO_2}, HCl / 273–278 K; 4) H3PO2\mathrm{H_3PO_2} gives the major product(s).)
  1. (A)1,2,4,5-tetrabromobenzene
  2. (B)1,2,3,4-tetrabromobenzene
  3. (C)1,3,5-tribromobenzene
  4. (D)1,2,3,5-tetrabromobenzene

Tests: Use NH2 as a temporary director: install bromines, then delete the amino group by deamination.

Show solution
  1. In mixed acid aniline is mostly protonated to anilinium, which directs meta, so nitration gives p-nitroaniline (P, 51%), m-nitroaniline (Q, 47%) and o-nitroaniline (R, 2%). So R is o-nitroaniline.

    Why: The minor 2% product is ortho: both steric hindrance and the meta-directing anilinium ion work against it.

  2. Ac2O\mathrm{Ac_2O} gives o-nitroacetanilide; Br2/CH3CO2H\mathrm{Br_2/CH_3CO_2H} brominates para to the activating NHAc group: 4-bromo-2-nitroacetanilide. Hydrolysis (H3O+\mathrm{H_3O^+}) gives 4-bromo-2-nitroaniline.
  3. Diazotisation and then EtOH, Δ\Delta replaces −N2+\mathrm{-N_2^+} by H: S = 1-bromo-3-nitrobenzene (m-bromonitrobenzene).
  4. Sn/HCl reduces −NO2\mathrm{-NO_2} to −NH2\mathrm{-NH_2}: 3-bromoaniline. Excess bromine water brominates every free position ortho and para to NH2\mathrm{NH_2} (C2, C4, C6): 2,3,4,6-tetrabromoaniline.
  5. Diazotisation and H3PO2\mathrm{H_3PO_2} remove the amino group (replace it by H): Br remains at the old C2, C3, C4, C6, which renumbers as 1,2,3,5-tetrabromobenzene: option (D).
AnswerAnswer: (D) 1,2,3,5-tetrabromobenzene
Ask about this question
Q4

Chemistry, Question 4 (4 marks)

Carbohydrates (glucose, Haworth projections) · +4 / −2
The Fischer presentation of D-glucose is given below. (The figure shows the open-chain Fischer projection: CHO at the top; C2 with OH on the right; C3 with OH on the left; C4 with OH on the right; C5 with OH on the right; CH2OH\mathrm{CH_2OH} at the bottom.) The correct structure(s) of β\beta-L-glucopyranose is (are) (Each option is a six-membered pyranose ring drawn with the ring O at the top right; going round from the ring O: C1 at the right, C2 at the bottom right, C3 at the bottom left, C4 at the left, C5 at the top left. "Up" and "down" give the face of each substituent.)
  1. (A)C5: H up, CH2OH\mathrm{CH_2OH} down; C1: OH up, H down; C2: OH up, H down; C3: H up, OH down; C4: OH up, H down
  2. (B)C5: H up, CH2OH\mathrm{CH_2OH} down; C1: OH up, H down; C2: H up, OH down; C3: H up, OH down; C4: OH up, H down
  3. (C)C5: CH2OH\mathrm{CH_2OH} up, H down; C1: OH up, H down; C2: OH up, H down; C3: OH up, H down; C4: H up, OH down
  4. (D)C5: H up, CH2OH\mathrm{CH_2OH} down; C1: H up, OH down; C2: OH up, H down; C3: H up, OH down; C4: OH up, H down

Tests: Turn a Fischer projection into a Haworth ring and handle both D/L and alpha/beta.

Show solution
  1. In the Haworth form of a D-sugar, a group on the right in the Fischer projection points down. So β\beta-D-glucopyranose has CH2OH\mathrm{CH_2OH} (C5) up, C1-OH up (β\beta: cis to CH2OH\mathrm{CH_2OH}), C2-OH down, C3-OH up, C4-OH down.
  2. L-glucose is the mirror image of D-glucose, so β\beta-L-glucopyranose is β\beta-D-glucopyranose with every substituent flipped: CH2OH\mathrm{CH_2OH} down, C1-OH down, C2-OH up, C3-OH down, C4-OH up.

    Why: The enantiomer of the beta-D anomer is the beta-L anomer; the anomeric OH stays cis to CH2OH.

  3. (A) has the L-glucose pattern at C2, C3, C4 but the C1-OH up, trans to CH2OH\mathrm{CH_2OH}: this is α\alpha-L-glucopyranose. Not correct.
  4. (B) has C2-OH down (L-glucose needs it up): this is an L-mannose (α\alpha-L-mannopyranose). Not correct.
  5. (C) has CH2OH\mathrm{CH_2OH} up (a D-sugar) and C2-OH up, C3-OH up, C4-OH down: β\beta-D-mannopyranose. Not correct.
  6. (D) matches exactly: CH2OH\mathrm{CH_2OH} down, C1-OH down, C2 up, C3 down, C4 up. Only (D) is β\beta-L-glucopyranose.
AnswerAnswer: (D)
Ask about this question
Q5

Chemistry, Question 5 (4 marks)

Chemical kinetics (first-order gas reactions) · +4 / −2
For a first order reaction A(g)→2B(g)+C(g)\mathrm{A(g) \rightarrow 2B(g) + C(g)} at constant volume and 300 K, the total pressure at the beginning (t=0t = 0) and at time tt are P0P_0 and PtP_t, respectively. Initially, only A is present with concentration [A]0[\mathrm{A}]_0, and t1/3t_{1/3} is the time required for the partial pressure of A to reach 1/3rd of its initial value. The correct option(s) is (are) (Assume that all these gases behave as ideal gases)
  1. (A)A plot of ln⁡(3P0−Pt)\ln(3P_0 - P_t) against time: a straight line falling from a positive intercept
  2. (B)A plot of t1/3t_{1/3} against [A]0[\mathrm{A}]_0: a straight line falling from a positive intercept
  3. (C)A plot of ln⁡(P0−Pt)\ln(P_0 - P_t) against time: a straight line falling from a positive intercept
  4. (D)A plot of rate constant against [A]0[\mathrm{A}]_0: a horizontal straight line

Tests: Express the reactant's partial pressure through total pressure for a first-order gas reaction.

Show solution
  1. Let xx be the drop in the partial pressure of A. Then pA=P0−xp_\mathrm{A} = P_0 - x and Pt=(P0−x)+2x+x=P0+2xP_t = (P_0 - x) + 2x + x = P_0 + 2x, so x=Pt−P02x = \dfrac{P_t - P_0}{2} and pA=3P0−Pt2p_\mathrm{A} = \dfrac{3P_0 - P_t}{2}.
  2. First order: ln⁡pA=ln⁡P0−kt\ln p_\mathrm{A} = \ln P_0 - kt, so ln⁡(3P0−Pt)=ln⁡(2P0)−kt\ln(3P_0 - P_t) = \ln(2P_0) - kt: a straight line of slope −k-k. (A) True.
  3. (C) False. Pt>P0P_t > P_0 throughout, so P0−PtP_0 - P_t is negative and its logarithm is not even defined.
  4. (B) False. t1/3=ln⁡3kt_{1/3} = \dfrac{\ln 3}{k} does not depend on [A]0[\mathrm{A}]_0; its plot against [A]0[\mathrm{A}]_0 is horizontal, not falling.
  5. (D) True. The rate constant depends only on temperature, not on the initial concentration: a horizontal line.
AnswerAnswer: (A), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

Chemical equilibrium and thermodynamics · +4 / −2
For a reaction, A⇌P\mathrm{A \rightleftharpoons P}, the plots of [A] and [P] with time at temperatures T1T_1 and T2T_2 are given below. (The figure shows two panels, concentration in mol L−1\mathrm{mol\ L^{-1}} against time, with a dotted line at 5. Left: [A] starts at 10 and falls; at T2T_2 it falls faster at first but levels off higher, at T1T_1 it falls more slowly and levels off lower; both end below 5. Right: [P] starts at 0 and rises; at T2T_2 it rises faster but levels off lower, at T1T_1 it rises more slowly and levels off higher; both end above 5.) If T2>T1T_2 > T_1, the correct statement(s) is (are) (Assume ΔH∘\Delta H^\circ and ΔS∘\Delta S^\circ are independent of temperature and ratio of ln⁡K\ln K at T1T_1 to ln⁡K\ln K at T2T_2 is greater than T2/T1T_2/T_1. Here HH, SS, GG and KK are enthalpy, entropy, Gibbs energy and equilibrium constant, respectively.)
  1. (A)ΔH∘<0\Delta H^\circ < 0, ΔS∘<0\Delta S^\circ < 0
  2. (B)ΔG∘<0\Delta G^\circ < 0, ΔH∘>0\Delta H^\circ > 0
  3. (C)ΔG∘<0\Delta G^\circ < 0, ΔS∘<0\Delta S^\circ < 0
  4. (D)ΔG∘<0\Delta G^\circ < 0, ΔS∘>0\Delta S^\circ > 0

Tests: Read K from equilibrium curves at two temperatures and get the signs of ΔH°, ΔS°, ΔG°.

Show solution
  1. At equilibrium [P]>5>[A][\mathrm{P}] > 5 > [\mathrm{A}] at both temperatures, so K=[P]/[A]>1K = [\mathrm{P}]/[\mathrm{A}] > 1 and ΔG∘=−RTln⁡K<0\Delta G^\circ = -RT\ln K < 0 at both.
  2. At the higher temperature T2T_2 the equilibrium [P] is lower, so K(T2)<K(T1)K(T_2) < K(T_1): KK falls on heating, so the reaction is exothermic, ΔH∘<0\Delta H^\circ < 0. (B) is false.

    Why: Van 't Hoff: K decreases with temperature only when ΔH° is negative.

  3. ln⁡K=−ΔH∘RT+ΔS∘R\ln K = -\dfrac{\Delta H^\circ}{RT} + \dfrac{\Delta S^\circ}{R}, so RTln⁡K=−ΔH∘+TΔS∘RT\ln K = -\Delta H^\circ + T\Delta S^\circ.
  4. Given ln⁡K1ln⁡K2>T2T1\dfrac{\ln K_1}{\ln K_2} > \dfrac{T_2}{T_1} with ln⁡K2>0\ln K_2 > 0: T1ln⁡K1>T2ln⁡K2T_1\ln K_1 > T_2\ln K_2. Subtracting the two forms of step 3: (T1−T2)ΔS∘>0(T_1 - T_2)\Delta S^\circ > 0, and T1<T2T_1 < T_2, so ΔS∘<0\Delta S^\circ < 0. (D) is false.
  5. So ΔG∘<0\Delta G^\circ < 0, ΔH∘<0\Delta H^\circ < 0, ΔS∘<0\Delta S^\circ < 0: (A) and (C) are true.
AnswerAnswer: (A), (C)
Ask about this question

Chemistry, Section 2: 8 questions, the answer is a numerical value (truncated/rounded-off to the second decimal place): +3 if only the correct numerical value is entered, 0 in all other cases

Q7

Chemistry, Question 7 (3 marks)

p-Block elements (structures of oxides and oxoacids) · +3
The total number of compounds having at least one bridging oxo group among the molecules given below is ____. N2O3\mathrm{N_2O_3}, N2O5\mathrm{N_2O_5}, P4O6\mathrm{P_4O_6}, P4O7\mathrm{P_4O_7}, H4P2O5\mathrm{H_4P_2O_5}, H5P3O10\mathrm{H_5P_3O_{10}}, H2S2O3\mathrm{H_2S_2O_3}, H2S2O5\mathrm{H_2S_2O_5}

Tests: Draw the true structures of nitrogen, phosphorus and sulphur oxides and oxoacids.

Show solution
  1. A bridging oxo group is an O atom bonded to two other non-hydrogen atoms of the skeleton, as in X–O–X. Settle each structure.
  2. N2O3\mathrm{N_2O_3}: the molecule is O=N−NO2\mathrm{O{=}N{-}NO_2}, with a long N–N bond and no N–O–N bridge. No.

    Why: The symmetric O=N–O–N=O form is not the structure of N2O3; some keys count it, which is why 6 is sometimes printed.

  3. N2O5\mathrm{N_2O_5}: O2N−O−NO2\mathrm{O_2N{-}O{-}NO_2}. Yes. P4O6\mathrm{P_4O_6}: six P–O–P bridges along the edges of the P4\mathrm{P_4} tetrahedron. Yes. P4O7\mathrm{P_4O_7}: the same cage with one extra terminal P=O. Yes.
  4. H4P2O5\mathrm{H_4P_2O_5} (pyrophosphorous acid): (HO)HP(O)−O−P(O)H(OH)\mathrm{(HO)HP(O){-}O{-}P(O)H(OH)}. Yes. H5P3O10\mathrm{H_5P_3O_{10}} (triphosphoric acid): two P–O–P links. Yes.
  5. H2S2O3\mathrm{H_2S_2O_3} (thiosulphuric acid): one S bonded to the central S, no S–O–S. No. H2S2O5\mathrm{H_2S_2O_5} (disulphurous acid): HO−S(O)−S(O)2−OH\mathrm{HO{-}S(O){-}S(O)_2{-}OH} with an S–S bond, no S–O–S. No.
  6. Count: N2O5\mathrm{N_2O_5}, P4O6\mathrm{P_4O_6}, P4O7\mathrm{P_4O_7}, H4P2O5\mathrm{H_4P_2O_5}, H5P3O10\mathrm{H_5P_3O_{10}} = 5.
AnswerAnswer: 5
Ask about this question
Q8

Chemistry, Question 8 (3 marks)

Metallurgy (self-reduction of galena) · +3
Galena (an ore) is partially oxidized by passing air through it at high temperature. After some time, the passage of air is stopped, but the heating is continued in a closed furnace such that the contents undergo self-reduction. The weight (in kg) of Pb produced per kg of O2\mathrm{O_2} consumed is ____. (Atomic weights in g mol−1\mathrm{g\ mol^{-1}}: O = 16, S = 32, Pb = 207)

Tests: Combine roasting and self-reduction into one overall equation and do the stoichiometry.

Show solution
  1. Partial roasting: 2PbS+3O2→2PbO+2SO2\mathrm{2PbS + 3O_2 \rightarrow 2PbO + 2SO_2}.
  2. Self-reduction: PbS+2PbO→3Pb+SO2\mathrm{PbS + 2PbO \rightarrow 3Pb + SO_2}.
  3. Add them: 3PbS+3O2→3Pb+3SO2\mathrm{3PbS + 3O_2 \rightarrow 3Pb + 3SO_2}, i.e. one mole of Pb for every mole of O2\mathrm{O_2}.

    Why: The PbO made in roasting is exactly what the self-reduction step uses.

  4. Mass of Pb per kg of O2\mathrm{O_2} =20732=6.46875≈6.47= \dfrac{207}{32} = 6.46875 \approx 6.47 kg.

    Why: Rounded off to two decimals; truncation gives 6.46.

AnswerAnswer: 6.47 kg
Ask about this question
Q9

Chemistry, Question 9 (3 marks)

Redox titration (permanganate and oxalic acid) · +3
To measure the quantity of MnCl2\mathrm{MnCl_2} dissolved in an aqueous solution, it was completely converted to KMnO4\mathrm{KMnO_4} using the reaction, MnCl2+K2S2O8+H2O→KMnO4+H2SO4+HCl\mathrm{MnCl_2 + K_2S_2O_8 + H_2O \rightarrow KMnO_4 + H_2SO_4 + HCl} (equation not balanced). Few drops of concentrated HCl were added to this solution and gently warmed. Further, oxalic acid (225 mg) was added in portions till the colour of the permanganate ion disappeared. The quantity of MnCl2\mathrm{MnCl_2} (in mg) present in the initial solution is ____. (Atomic weights in g mol−1\mathrm{g\ mol^{-1}}: Mn = 55, Cl = 35.5)

Tests: Trace Mn through a conversion and a back-titration using the electron count.

Show solution
  1. Each Mn atom ends up as MnO4−\mathrm{MnO_4^-}, so moles of MnCl2\mathrm{MnCl_2} = moles of MnO4−\mathrm{MnO_4^-}.
  2. Oxalic acid, H2C2O4\mathrm{H_2C_2O_4} (M = 90): 22590=2.5\dfrac{225}{90} = 2.5 mmol.
  3. 2MnO4−+5H2C2O4+6H+→2Mn2++10CO2+8H2O\mathrm{2MnO_4^- + 5H_2C_2O_4 + 6H^+ \rightarrow 2Mn^{2+} + 10CO_2 + 8H_2O}, so MnO4−=25×2.5=1.0\mathrm{MnO_4^-} = \dfrac{2}{5}\times 2.5 = 1.0 mmol.

    Why: Mn gains 5 electrons; each oxalic acid loses 2.

  4. MnCl2\mathrm{MnCl_2}: M = 55 + 71 = 126; 1.0 mmol ×\times 126 = 126 mg.
AnswerAnswer: 126 mg
Ask about this question
Q10

Chemistry, Question 10 (3 marks)

Stereoisomerism (optical isomers, meso forms) · +3
For the given compound X, the total number of optically active stereoisomers is ____. (The figure shows X: a cyclopentane ring with, in order round the ring, C(a) bearing OH, C(b) bearing chain 1, C(c) bearing chain 2, C(d) bearing OH, and a CH2\mathrm{CH_2} between C(d) and C(a). Both chains are −CH=CH−CH(OH)−CH2CH2CH2CH2CH3\mathrm{-CH{=}CH{-}CH(OH){-}CH_2CH_2CH_2CH_2CH_3}. The two ring OH groups and chain 1 are on wedge bonds, the double bond of chain 1 is drawn E and its CH(OH) has a wedged OH. Chain 2 is joined to the ring by a wavy bond (ring carbon and C=C geometry not fixed) and its CH(OH) carries a wavy OH bond. Key printed with the figure: a wedge bond means the configuration at that carbon and the geometry of the double bond are fixed; a wavy bond means they are NOT fixed.)

Tests: Count stereoisomers from the free stereo elements and remove meso forms.

Show solution
  1. Fixed: C(a), C(d), C(b), the C=C of chain 1 and the CH(OH) of chain 1. Not fixed: C(c), the C=C of chain 2 and the CH(OH) of chain 2.
  2. Three free stereo elements, each with two choices: 23=82^3 = 8 stereoisomers.
  3. Look for a meso form: the ring has a possible mirror plane through the CH2 and the middle of the C(b)–C(c) bond; it swaps C(a) with C(d) (both OH on the same face, already symmetric) and chain 1 with chain 2 (identical constitutions).

    Why: Both side chains are the same 3-hydroxyoct-1-enyl group, so a mirror plane is possible.

  4. That plane exists for exactly one of the 8: chain 2 cis to chain 1 on the ring, its C=C also E, and its CH(OH) the mirror image of chain 1's (opposite R/S label). That isomer is meso, optically inactive.
  5. No other combination has a mirror plane or centre of symmetry, so optically active stereoisomers =8−1=7= 8 - 1 = 7.
AnswerAnswer: 7
Ask about this question
Q11

Chemistry, Question 11 (3 marks)

Organic conversions with yields (haloform, Hofmann) · +3
In the following reaction sequence, the amount of D (in g) formed from 10 moles of acetophenone is ____. (Atomic weights in g mol−1\mathrm{g\ mol^{-1}}: H = 1, C = 12, N = 14, O = 16, Br = 80. The yield (%) corresponding to the product in each step is given in the parenthesis) (The scheme shows: acetophenone, C6H5COCH3\mathrm{C_6H_5COCH_3}, with NaOBr then H3O+\mathrm{H_3O^+} gives A (60%); A with NH3\mathrm{NH_3}, Δ\Delta gives B (50%); B with Br2/KOH\mathrm{Br_2/KOH} gives C (50%); C with Br2\mathrm{Br_2} (3 equiv) in AcOH gives D (100%).)

Tests: Identify each product in a haloform–amide–Hofmann–bromination chain and carry the yields through.

Show solution
  1. NaOBr (haloform), then acid: A = benzoic acid, C6H5COOH\mathrm{C_6H_5COOH}. Moles: 10×0.60=610 \times 0.60 = 6.
  2. NH3\mathrm{NH_3}, Δ\Delta: ammonium benzoate loses water to B = benzamide, C6H5CONH2\mathrm{C_6H_5CONH_2}. Moles: 6×0.50=36 \times 0.50 = 3.
  3. Br2/KOH\mathrm{Br_2/KOH} (Hofmann bromamide degradation): C = aniline, C6H5NH2\mathrm{C_6H_5NH_2}. Moles: 3×0.50=1.53 \times 0.50 = 1.5.
  4. Br2\mathrm{Br_2} (3 equiv): D = 2,4,6-tribromoaniline, C6H4Br3N\mathrm{C_6H_4Br_3N}, M = 72 + 4 + 240 + 14 = 330. Moles: 1.5 (100%).
  5. Mass of D =1.5×330=495= 1.5 \times 330 = 495 g.
AnswerAnswer: 495 g
Ask about this question
Q12

Chemistry, Question 12 (3 marks)

Chemical equilibrium (Gibbs energy, Ellingham) · +3
The surface of copper gets tarnished by the formation of copper oxide. N2\mathrm{N_2} gas was passed to prevent the oxide formation during heating of copper at 1250 K. However, the N2\mathrm{N_2} gas contains 1 mole % of water vapour as impurity. The water vapour oxidises copper as per the reaction given below: 2Cu(s)+H2O(g)→Cu2O(s)+H2(g)\mathrm{2Cu(s) + H_2O(g) \rightarrow Cu_2O(s) + H_2(g)}. pH2p_{\mathrm{H_2}} is the minimum partial pressure of H2\mathrm{H_2} (in bar) needed to prevent the oxidation at 1250 K. The value of ln⁡(pH2)\ln(p_{\mathrm{H_2}}) is ____. (Given: total pressure = 1 bar, RR (universal gas constant) = 8 J K−1 mol−1\mathrm{J\ K^{-1}\ mol^{-1}}, ln⁡(10)=2.3\ln(10) = 2.3. Cu(s) and Cu2O(s)\mathrm{Cu_2O(s)} are mutually immiscible. At 1250 K: 2Cu(s)+12O2(g)→Cu2O(s)\mathrm{2Cu(s) + \tfrac{1}{2}O_2(g) \rightarrow Cu_2O(s)}; ΔG∘=−78,000 J mol−1\Delta G^\circ = -78{,}000\ \mathrm{J\ mol^{-1}}; H2(g)+12O2(g)→H2O(g)\mathrm{H_2(g) + \tfrac{1}{2}O_2(g) \rightarrow H_2O(g)}; ΔG∘=−1,78,000 J mol−1\Delta G^\circ = -1{,}78{,}000\ \mathrm{J\ mol^{-1}}; GG is the Gibbs energy)

Tests: Combine two ΔG° values and use ΔG = 0 to find the gas ratio that just stops a reaction.

Show solution
  1. Subtract the second reaction from the first: 2Cu+H2O→Cu2O+H2\mathrm{2Cu + H_2O \rightarrow Cu_2O + H_2}, ΔG∘=−78,000−(−178,000)=+100,000 J mol−1\Delta G^\circ = -78{,}000 - (-178{,}000) = +100{,}000\ \mathrm{J\ mol^{-1}}.
  2. Oxidation is just prevented when ΔG=0\Delta G = 0: 0=ΔG∘+RTln⁡pH2pH2O0 = \Delta G^\circ + RT\ln\dfrac{p_{\mathrm{H_2}}}{p_{\mathrm{H_2O}}}.

    Why: The solids are pure, immiscible phases, so their activities are 1.

  3. ln⁡pH2pH2O=−100,0008×1250=−10\ln\dfrac{p_{\mathrm{H_2}}}{p_{\mathrm{H_2O}}} = -\dfrac{100{,}000}{8 \times 1250} = -10.
  4. pH2O=0.01p_{\mathrm{H_2O}} = 0.01 bar (1 mol % of 1 bar), so ln⁡pH2=−10+ln⁡(10−2)=−10−2(2.3)=−14.6\ln p_{\mathrm{H_2}} = -10 + \ln(10^{-2}) = -10 - 2(2.3) = -14.6.
AnswerAnswer: −14.6
Ask about this question
Q13

Chemistry, Question 13 (3 marks)

Chemical kinetics and equilibrium (Arrhenius equation) · +3
Consider the following reversible reaction, A(g)+B(g)⇌AB(g)\mathrm{A(g) + B(g) \rightleftharpoons AB(g)}. The activation energy of the backward reaction exceeds that of the forward reaction by 2RT2RT (in J mol−1\mathrm{J\ mol^{-1}}). If the pre-exponential factor of the forward reaction is 4 times that of the reverse reaction, the absolute value of ΔG∘\Delta G^\circ (in J mol−1\mathrm{J\ mol^{-1}}) for the reaction at 300 K is ____. (Given; ln⁡(2)=0.7\ln(2) = 0.7, RT=2500 J mol−1RT = 2500\ \mathrm{J\ mol^{-1}} at 300 K and GG is the Gibbs energy)

Tests: Write the equilibrium constant as the ratio of forward and backward Arrhenius rate constants.

Show solution
  1. K=kfkb=Afe−Ef/RTAbe−Eb/RT=AfAb e(Eb−Ef)/RTK = \dfrac{k_f}{k_b} = \dfrac{A_f e^{-E_f/RT}}{A_b e^{-E_b/RT}} = \dfrac{A_f}{A_b}\,e^{(E_b - E_f)/RT}.
  2. AfAb=4\dfrac{A_f}{A_b} = 4 and Eb−Ef=2RTE_b - E_f = 2RT: K=4e2K = 4e^{2}, so ln⁡K=ln⁡4+2=1.4+2=3.4\ln K = \ln 4 + 2 = 1.4 + 2 = 3.4.
  3. ΔG∘=−RTln⁡K=−2500×3.4=−8500 J mol−1\Delta G^\circ = -RT\ln K = -2500 \times 3.4 = -8500\ \mathrm{J\ mol^{-1}}; absolute value 8500.
AnswerAnswer: 8500
Ask about this question
Q14

Chemistry, Question 14 (3 marks)

Electrochemistry (Nernst equation, thermodynamics of cells) · +3
Consider an electrochemical cell: A(s) ∣ An+(aq,2 M) ∥ B2n+(aq,1 M) ∣ B(s)\mathrm{A(s)\,|\,A^{n+}(aq, 2\ M)\,\|\,B^{2n+}(aq, 1\ M)\,|\,B(s)}. The value of ΔH∘\Delta H^\circ for the cell reaction is twice that of ΔG∘\Delta G^\circ at 300 K. If the emf of the cell is zero, the ΔS∘\Delta S^\circ (in J K−1 mol−1\mathrm{J\ K^{-1}\ mol^{-1}}) of the cell reaction per mole of B formed at 300 K is ____. (Given: ln⁡(2)=0.7\ln(2) = 0.7, RR (universal gas constant) = 8.3 J K−1 mol−1\mathrm{J\ K^{-1}\ mol^{-1}}. HH, SS and GG are enthalpy, entropy and Gibbs energy, respectively.)

Tests: Use E = 0 to get ΔG° from Q, then ΔS° from ΔG = ΔH − TΔS.

Show solution
  1. Anode: A→An++ne−\mathrm{A \rightarrow A^{n+} + ne^-} (twice); cathode: B2n++2ne−→B\mathrm{B^{2n+} + 2ne^- \rightarrow B}. Cell reaction per mole of B: 2A+B2n+→2An++B\mathrm{2A + B^{2n+} \rightarrow 2A^{n+} + B}.
  2. emf = 0 means ΔG=0\Delta G = 0, so ΔG∘=−RTln⁡Q\Delta G^\circ = -RT\ln Q with Q=[An+]2[B2n+]=221=4Q = \dfrac{[\mathrm{A^{n+}}]^2}{[\mathrm{B^{2n+}}]} = \dfrac{2^2}{1} = 4.
  3. ΔS∘=ΔH∘−ΔG∘T=2ΔG∘−ΔG∘T=ΔG∘T=−Rln⁡4\Delta S^\circ = \dfrac{\Delta H^\circ - \Delta G^\circ}{T} = \dfrac{2\Delta G^\circ - \Delta G^\circ}{T} = \dfrac{\Delta G^\circ}{T} = -R\ln 4.
  4. ΔS∘=−8.3×2×0.7=−11.62 J K−1 mol−1\Delta S^\circ = -8.3 \times 2 \times 0.7 = -11.62\ \mathrm{J\ K^{-1}\ mol^{-1}}.
AnswerAnswer: −11.62 J K−1 mol−1\mathrm{J\ K^{-1}\ mol^{-1}}
Ask about this question

Chemistry, Section 3: 4 questions, each with two matching lists (List-I and List-II) and four options, only one of which is the correct matching: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Chemistry, Question 15 (3 marks)

Coordination compounds (hybridisation, VBT) · +3 / −1
Match each set of hybrid orbitals from LIST–I with complex(es) given in LIST–II. The correct option is
LIST–ILIST–II
(P) dsp2dsp^2(1) [FeF6]4−\mathrm{[FeF_6]^{4-}}
(Q) sp3sp^3(2) [Ti(H2O)3Cl3]\mathrm{[Ti(H_2O)_3Cl_3]}
(R) sp3d2sp^3d^2(3) [Cr(NH3)6]3+\mathrm{[Cr(NH_3)_6]^{3+}}
(S) d2sp3d^2sp^3(4) [FeCl4]2−\mathrm{[FeCl_4]^{2-}}
(5) Ni(CO)4\mathrm{Ni(CO)_4}
(6) [Ni(CN)4]2−\mathrm{[Ni(CN)_4]^{2-}}
  1. (A)P →\rightarrow 5; Q →\rightarrow 4, 6; R →\rightarrow 2, 3; S →\rightarrow 1
  2. (B)P →\rightarrow 5, 6; Q →\rightarrow 4; R →\rightarrow 3; S →\rightarrow 1, 2
  3. (C)P →\rightarrow 6; Q →\rightarrow 4, 5; R →\rightarrow 1; S →\rightarrow 2, 3
  4. (D)P →\rightarrow 4, 6; Q →\rightarrow 5, 6; R →\rightarrow 1, 2; S →\rightarrow 3

Tests: Assign inner- or outer-orbital hybridisation from the metal's d count and the ligand field.

Show solution
  1. (1) [FeF6]4−\mathrm{[FeF_6]^{4-}}: Fe2+\mathrm{Fe^{2+}} 3d63d^6, F⁻ is weak field, high spin, outer orbitals: sp3d2sp^3d^2 (R).
  2. (2) [Ti(H2O)3Cl3]\mathrm{[Ti(H_2O)_3Cl_3]}: Ti3+\mathrm{Ti^{3+}} 3d13d^1, two empty 3d orbitals available: d2sp3d^2sp^3 (S). (3) [Cr(NH3)6]3+\mathrm{[Cr(NH_3)_6]^{3+}}: Cr3+\mathrm{Cr^{3+}} 3d33d^3, two empty 3d orbitals: d2sp3d^2sp^3 (S).
  3. (4) [FeCl4]2−\mathrm{[FeCl_4]^{2-}}: Fe2+\mathrm{Fe^{2+}}, weak-field Cl⁻, tetrahedral: sp3sp^3 (Q). (5) Ni(CO)4\mathrm{Ni(CO)_4}: Ni(0) 3d103d^{10}, tetrahedral: sp3sp^3 (Q).
  4. (6) [Ni(CN)4]2−\mathrm{[Ni(CN)_4]^{2-}}: Ni2+\mathrm{Ni^{2+}} 3d83d^8, strong-field CN⁻ pairs the electrons, square planar: dsp2dsp^2 (P).
  5. P →\rightarrow 6; Q →\rightarrow 4, 5; R →\rightarrow 1; S →\rightarrow 2, 3: option (C).
AnswerAnswer: (C) P →\rightarrow 6; Q →\rightarrow 4, 5; R →\rightarrow 1; S →\rightarrow 2, 3
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

Pinacol rearrangement and oxidation of carbonyl compounds · +3 / −1
The desired product X can be prepared by reacting the major product of the reactions in LIST-I with one or more appropriate reagents in LIST-II. (given, order of migratory aptitude: aryl > alkyl > hydrogen) (The figure shows X = 2,2-diphenylpropanoic acid, Ph2C(CH3)COOH\mathrm{Ph_2C(CH_3)COOH}.) The correct option is
LIST-ILIST-II
(P) Ph2C(OH)−C(OH)Me2\mathrm{Ph_2C(OH){-}C(OH)Me_2} (2-methyl-1,1-diphenylpropane-1,2-diol) + H2SO4\mathrm{H_2SO_4}(1) I2\mathrm{I_2}, NaOH
(Q) Ph2C(NH2)−CH(OH)Me\mathrm{Ph_2C(NH_2){-}CH(OH)Me} (1-amino-1,1-diphenylpropan-2-ol) + HNO2\mathrm{HNO_2}(2) [Ag(NH3)2]OH\mathrm{[Ag(NH_3)_2]OH}
(R) PhC(OH)(Me)−C(OH)(Ph)Me\mathrm{PhC(OH)(Me){-}C(OH)(Ph)Me} (2,3-diphenylbutane-2,3-diol) + H2SO4\mathrm{H_2SO_4}(3) Fehling solution
(S) Ph2C(Br)−CH(OH)Me\mathrm{Ph_2C(Br){-}CH(OH)Me} (1-bromo-1,1-diphenylpropan-2-ol) + AgNO3\mathrm{AgNO_3}(4) HCHO, NaOH
(5) NaOBr
  1. (A)P →\rightarrow 1; Q →\rightarrow 2, 3; R →\rightarrow 1, 4; S →\rightarrow 2, 4
  2. (B)P →\rightarrow 1, 5; Q →\rightarrow 3, 4; R →\rightarrow 4, 5; S →\rightarrow 3
  3. (C)P →\rightarrow 1, 5; Q →\rightarrow 3, 4; R →\rightarrow 5; S →\rightarrow 2, 4
  4. (D)P →\rightarrow 1, 5; Q →\rightarrow 2, 3; R →\rightarrow 1, 5; S →\rightarrow 2, 3

Tests: Predict pinacol and semipinacol products, then pick the reagent that turns each into the acid.

Show solution
  1. X, Ph2C(Me)COOH\mathrm{Ph_2C(Me)COOH}, can come from the methyl ketone Ph2C(Me)COCH3\mathrm{Ph_2C(Me)COCH_3} by the haloform reaction (I2\mathrm{I_2}/NaOH or NaOBr), or from the aldehyde Ph2C(Me)CHO\mathrm{Ph_2C(Me)CHO} by oxidation (Tollens' or Fehling).
  2. P: the diphenyl-substituted carbocation Ph2C+\mathrm{Ph_2C^+} forms; a methyl shifts from the other carbon, which becomes C=O: Ph2C(Me)−CO−CH3\mathrm{Ph_2C(Me){-}CO{-}CH_3}. Haloform gives X: P →\rightarrow 1, 5.
  3. R: the two carbons are alike, giving PhC+(Me)\mathrm{PhC^+(Me)}; the phenyl (higher migratory aptitude than methyl) shifts: Ph2C(Me)−CO−CH3\mathrm{Ph_2C(Me){-}CO{-}CH_3}, the same methyl ketone: R →\rightarrow 1, 5.
  4. Q: diazotisation of the amine and loss of N2\mathrm{N_2} give Ph2C+\mathrm{Ph_2C^+}; from CH(OH)Me, methyl migrates rather than H: Ph2C(Me)−CHO\mathrm{Ph_2C(Me){-}CHO}. Tollens' or Fehling oxidise it to X: Q →\rightarrow 2, 3.

    Why: With HCHO/NaOH this aldehyde would be reduced (crossed Cannizzaro), not oxidised, so 4 does not fit.

  5. S: Ag+\mathrm{Ag^+} pulls off bromide to give the same Ph2C+\mathrm{Ph_2C^+} next to CH(OH)Me, so again Ph2C(Me)CHO\mathrm{Ph_2C(Me)CHO}: S →\rightarrow 2, 3.
  6. P → 1, 5; Q → 2, 3; R → 1, 5; S → 2, 3: option (D).
AnswerAnswer: (D) P →\rightarrow 1, 5; Q →\rightarrow 2, 3; R →\rightarrow 1, 5; S →\rightarrow 2, 3
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

Alkyl halides and ethers (substitution vs elimination) · +3 / −1
LIST-I contains reactions and LIST-II contains major products. Match each reaction in LIST-I with one or more products in LIST-II and choose the correct option.
LIST-ILIST-II
(P) (CH3)3CONa+(CH3)3CBr→\mathrm{(CH_3)_3CONa + (CH_3)_3CBr \rightarrow}(1) (CH3)3COH\mathrm{(CH_3)_3COH}
(Q) (CH3)3COCH3+HBr→\mathrm{(CH_3)_3COCH_3 + HBr \rightarrow}(2) (CH3)3CBr\mathrm{(CH_3)_3CBr}
(R) (CH3)3CBr+NaOMe→\mathrm{(CH_3)_3CBr + NaOMe \rightarrow}(3) (CH3)3COCH3\mathrm{(CH_3)_3COCH_3}
(S) (CH3)3CONa+CH3Br→\mathrm{(CH_3)_3CONa + CH_3Br \rightarrow}(4) (CH3)2C=CH2\mathrm{(CH_3)_2C{=}CH_2}
(5) (CH3)3C−O−C(CH3)3\mathrm{(CH_3)_3C{-}O{-}C(CH_3)_3}
  1. (A)P →\rightarrow 1, 5; Q →\rightarrow 2; R →\rightarrow 3; S →\rightarrow 4
  2. (B)P →\rightarrow 1, 4; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 3
  3. (C)P →\rightarrow 1, 4; Q →\rightarrow 1, 2; R →\rightarrow 3, 4; S →\rightarrow 4
  4. (D)P →\rightarrow 4, 5; Q →\rightarrow 4; R →\rightarrow 4; S →\rightarrow 3, 4

Tests: Choose SN1, SN2 or E2 from the substrate and the base, and plan a Williamson synthesis correctly.

Show solution
  1. P: a tertiary halide with a strong, bulky base cannot do SN2S_N2; E2 gives isobutylene (4), and the alkoxide takes the proton to become tert-butanol (1). P →\rightarrow 1, 4.
  2. Q: HBr protonates the ether; the C–O bond to the tertiary carbon breaks (SN1S_N1, stable tert-butyl cation), giving tert-butyl bromide (2) and methanol. Q →\rightarrow 2.

    Why: Methanol is not in List-II, so only 2 is matched.

  3. R: tertiary bromide with the strong base methoxide: elimination dominates, isobutylene (4). R →\rightarrow 4.
  4. S: Williamson synthesis with a methyl halide: SN2S_N2 at CH3Br\mathrm{CH_3Br} gives tert-butyl methyl ether (3). S →\rightarrow 3.
  5. P → 1, 4; Q → 2; R → 4; S → 3: option (B).
AnswerAnswer: (B) P →\rightarrow 1, 4; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 3
Ask about this question
Q18

Chemistry, Question 18 (3 marks)

Ionic equilibrium (buffers, salt hydrolysis, solubility) · +3 / −1
Dilution processes of different aqueous solutions, with water, are given in LIST-I. The effects of dilution of the solutions on [H+][\mathrm{H^+}] are given in LIST-II. (Note: Degree of dissociation (α\alpha) of weak acid and weak base is ≪1\ll 1; degree of hydrolysis of salt ≪1\ll 1; [H+][\mathrm{H^+}] represents the concentration of H+\mathrm{H^+} ions) Match each process given in LIST-I with one or more effect(s) in LIST-II. The correct option is
LIST-ILIST-II
(P) (10 mL of 0.1 M NaOH + 20 mL of 0.1 M acetic acid) diluted to 60 mL(1) the value of [H+][\mathrm{H^+}] does not change on dilution
(Q) (20 mL of 0.1 M NaOH + 20 mL of 0.1 M acetic acid) diluted to 80 mL(2) the value of [H+][\mathrm{H^+}] changes to half of its initial value on dilution
(R) (20 mL of 0.1 M HCl + 20 mL of 0.1 M ammonia solution) diluted to 80 mL(3) the value of [H+][\mathrm{H^+}] changes to two times of its initial value on dilution
(S) 10 mL saturated solution of Ni(OH)2\mathrm{Ni(OH)_2} in equilibrium with excess solid Ni(OH)2\mathrm{Ni(OH)_2} is diluted to 20 mL (solid Ni(OH)2\mathrm{Ni(OH)_2} is still present after dilution).(4) the value of [H+][\mathrm{H^+}] changes to 12\dfrac{1}{\sqrt{2}} times of its initial value on dilution
(5) the value of [H+][\mathrm{H^+}] changes to 2\sqrt{2} times of its initial value on dilution
  1. (A)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 3; S →\rightarrow 1
  2. (B)P →\rightarrow 4; Q →\rightarrow 3; R →\rightarrow 2; S →\rightarrow 3
  3. (C)P →\rightarrow 1; Q →\rightarrow 4; R →\rightarrow 5; S →\rightarrow 3
  4. (D)P →\rightarrow 1; Q →\rightarrow 5; R →\rightarrow 4; S →\rightarrow 1

Tests: Predict how [H+] scales with dilution for a buffer, a hydrolysing salt and a saturated solution.

Show solution
  1. P: 1 mmol NaOH + 2 mmol CH3COOH\mathrm{CH_3COOH} gives 1 mmol CH3COONa\mathrm{CH_3COONa} + 1 mmol CH3COOH\mathrm{CH_3COOH}: a buffer. [H+]=Ka[acid][salt][\mathrm{H^+}] = K_a\dfrac{[\text{acid}]}{[\text{salt}]} depends only on the ratio, which dilution does not change. P →\rightarrow 1.
  2. Q: 2 mmol each: exactly neutralised, 2 mmol sodium acetate in 40 mL (C = 0.05 M). Anion hydrolysis: [OH−]=KhC[\mathrm{OH^-}] = \sqrt{K_hC}, so [H+]=KwKhC∝1C[\mathrm{H^+}] = \dfrac{K_w}{\sqrt{K_hC}} \propto \dfrac{1}{\sqrt{C}}. Diluting 40 to 80 mL halves C, so [H+][\mathrm{H^+}] becomes 2\sqrt{2} times. Q →\rightarrow 5.
  3. R: 2 mmol each of HCl and NH3\mathrm{NH_3}: 2 mmol NH4Cl\mathrm{NH_4Cl}. Cation hydrolysis: [H+]=KhC∝C[\mathrm{H^+}] = \sqrt{K_hC} \propto \sqrt{C}. Halving C makes [H+][\mathrm{H^+}] 12\dfrac{1}{\sqrt{2}} times. R →\rightarrow 4.
  4. S: solid Ni(OH)2\mathrm{Ni(OH)_2} is still present, so the solution stays saturated: [OH−][\mathrm{OH^-}] is fixed by KspK_{sp} and [H+][\mathrm{H^+}] does not change. S →\rightarrow 1.

    Why: More solid dissolves to restore saturation after dilution.

  5. P → 1; Q → 5; R → 4; S → 1: option (D).
AnswerAnswer: (D) P →\rightarrow 1; Q →\rightarrow 5; R →\rightarrow 4; S →\rightarrow 1
Ask about this question

Mathematics, Section 1: 6 questions, one or more than one option correct: +4 if only (all) the correct options are chosen; +3 if all four options are correct but only three are chosen; +2 if three or more options are correct but only two are chosen, both correct; +1 if two or more options are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q1

Mathematics, Question 1 (4 marks)

Inverse trigonometric functions · +4 / −2
For any positive integer nn, define fn:(0,∞)→Rf_n : (0, \infty) \rightarrow \mathbb{R} as fn(x)=∑j=1ntan⁡−1(11+(x+j)(x+j−1))f_n(x) = \displaystyle\sum_{j=1}^{n} \tan^{-1}\left(\dfrac{1}{1 + (x + j)(x + j - 1)}\right) for all x∈(0,∞)x \in (0, \infty). (Here, the inverse trigonometric function tan⁡−1x\tan^{-1} x assumes values in (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right).) Then, which of the following statement(s) is (are) TRUE?
  1. (A)∑j=15tan⁡2(fj(0))=55\displaystyle\sum_{j=1}^{5} \tan^2(f_j(0)) = 55
  2. (B)∑j=110(1+fj′(0))sec⁡2(fj(0))=10\displaystyle\sum_{j=1}^{10} \left(1 + f_j'(0)\right)\sec^2(f_j(0)) = 10
  3. (C)For any fixed positive integer nn, lim⁡x→∞tan⁡(fn(x))=1n\displaystyle\lim_{x \to \infty} \tan(f_n(x)) = \dfrac{1}{n}
  4. (D)For any fixed positive integer nn, lim⁡x→∞sec⁡2(fn(x))=1\displaystyle\lim_{x \to \infty} \sec^2(f_n(x)) = 1

Tests: Telescope a sum of inverse tangents and take limits, respecting the stated domain.

Show solution
  1. Each term telescopes: 11+(x+j)(x+j−1)=(x+j)−(x+j−1)1+(x+j)(x+j−1)\dfrac{1}{1 + (x+j)(x+j-1)} = \dfrac{(x+j) - (x+j-1)}{1 + (x+j)(x+j-1)}, so the term is tan⁡−1(x+j)−tan⁡−1(x+j−1)\tan^{-1}(x+j) - \tan^{-1}(x+j-1).

    Why: For x > 0 both arguments are positive, so the difference formula holds without a ±π correction.

  2. Summing, fn(x)=tan⁡−1(x+n)−tan⁡−1xf_n(x) = \tan^{-1}(x+n) - \tan^{-1}x, and tan⁡(fn(x))=(x+n)−x1+x(x+n)=n1+nx+x2\tan(f_n(x)) = \dfrac{(x+n) - x}{1 + x(x+n)} = \dfrac{n}{1 + nx + x^2}.
  3. (C): as x→∞x \to \infty, tan⁡(fn(x))=n1+nx+x2→0\tan(f_n(x)) = \dfrac{n}{1 + nx + x^2} \to 0, not 1n\dfrac{1}{n}. False.
  4. (D): sec⁡2(fn(x))=1+tan⁡2(fn(x))→1+0=1\sec^2(f_n(x)) = 1 + \tan^2(f_n(x)) \to 1 + 0 = 1. True.
  5. (A) and (B): they need fj(0)f_j(0) and fj′(0)f_j'(0), but fjf_j is defined only on (0,∞)(0, \infty); 00 is not in its domain, so these quantities do not exist and the statements cannot be TRUE.

    Why: The question fixes the domain as (0, ∞) on purpose; the published key marks only (D).

  6. (If one pushed the formula to x=0x = 0 anyway: tan⁡(fj(0))=j\tan(f_j(0)) = j gives ∑15j2=55\sum_{1}^{5} j^2 = 55, and 1+fj′(0)=11+j21 + f_j'(0) = \dfrac{1}{1+j^2} with sec⁡2=1+j2\sec^2 = 1 + j^2 gives 1010. That is exactly the trap: those values belong to a function the question did not define.)
AnswerAnswer: (D)
Ask about this question
Q2

Mathematics, Question 2 (4 marks)

Circles (locus and chords) · +4 / −2
Let TT be the line passing through the points P(−2,7)P(-2, 7) and Q(2,−5)Q(2, -5). Let F1F_1 be the set of all pairs of circles (S1,S2)(S_1, S_2) such that TT is tangent to S1S_1 at PP and tangent to S2S_2 at QQ, and also such that S1S_1 and S2S_2 touch each other at a point, say, MM. Let E1E_1 be the set representing the locus of MM as the pair (S1,S2)(S_1, S_2) varies in F1F_1. Let the set of all straight line segments joining a pair of distinct points of E1E_1 and passing through the point R(1,1)R(1, 1) be F2F_2. Let E2E_2 be the set of the mid-points of the line segments in the set F2F_2. Then, which of the following statement(s) is (are) TRUE?
  1. (A)The point (−2,7)(-2, 7) lies in E1E_1
  2. (B)The point (45,75)\left(\dfrac{4}{5}, \dfrac{7}{5}\right) does NOT lie in E2E_2
  3. (C)The point (12,1)\left(\dfrac{1}{2}, 1\right) lies in E2E_2
  4. (D)The point (0,32)\left(0, \dfrac{3}{2}\right) does NOT lie in E1E_1

Tests: Find a locus from equal tangent lengths, then the locus of midpoints of chords through a fixed point, with excluded points.

Show solution
  1. Let the common tangent at MM meet TT at XX. Tangent lengths from XX: XP=XMXP = XM (to S1S_1) and XQ=XMXQ = XM (to S2S_2). So XX is the midpoint of PQPQ, X=(0,1)X = (0, 1), and XM=PQ2XM = \dfrac{PQ}{2}.

    Why: Equal tangents from an external point to a circle.

  2. PQ=42+122=160PQ = \sqrt{4^2 + 12^2} = \sqrt{160}, so XM=40XM = \sqrt{40}: MM lies on x2+(y−1)2=40x^2 + (y-1)^2 = 40, the circle on diameter PQPQ. MM can never be PP or QQ (a circle would shrink to a point), so E1E_1 is this circle without PP and QQ.
  3. (A): (−2,7)(-2, 7) is PP itself, which is excluded. False. (D): 02+(32−1)2=14≠400^2 + \left(\tfrac{3}{2} - 1\right)^2 = \tfrac{1}{4} \ne 40, so (0,32)\left(0, \tfrac{3}{2}\right) is not on E1E_1. True.
  4. Midpoint N(h,k)N(h, k) of a chord through R(1,1)R(1, 1) of a circle with centre C(0,1)C(0, 1): CN⊥RNCN \perp RN, so NN lies on the circle on diameter CRCR: h(h−1)+(k−1)2=0h(h - 1) + (k-1)^2 = 0.
  5. (C): 12(−12)+0=−14≠0\tfrac{1}{2}\left(-\tfrac{1}{2}\right) + 0 = -\tfrac{1}{4} \ne 0, so (12,1)\left(\tfrac{1}{2}, 1\right) is not a midpoint. False.
  6. (B): 45(−15)+(25)2=−425+425=0\tfrac{4}{5}\left(-\tfrac{1}{5}\right) + \left(\tfrac{2}{5}\right)^2 = -\tfrac{4}{25} + \tfrac{4}{25} = 0, so it is on the midpoint circle. But that chord has slope 7/5−14/5−1=−2\dfrac{7/5 - 1}{4/5 - 1} = -2: the line y−1=−2(x−1)y - 1 = -2(x - 1) passes through P(−2,7)P(-2, 7), so one end of the chord is PP, which is not in E1E_1. The segment is not in F2F_2, so (45,75)∉E2\left(\tfrac{4}{5}, \tfrac{7}{5}\right) \notin E_2. True.

    Why: A midpoint fixes its chord uniquely, so there is no other chord to rescue the point.

AnswerAnswer: (B), (D)
Ask about this question
Q3

Mathematics, Question 3 (4 marks)

Systems of linear equations · +4 / −2
Let SS be the set of all column matrices [b1b2b3]\begin{bmatrix} b_1 \\ b_2 \\ b_3 \end{bmatrix} such that b1,b2,b3∈Rb_1, b_2, b_3 \in \mathbb{R} and the system of equations (in real variables) −x+2y+5z=b1-x + 2y + 5z = b_1, 2x−4y+3z=b22x - 4y + 3z = b_2, x−2y+2z=b3x - 2y + 2z = b_3 has at least one solution. Then, which of the following system(s) (in real variables) has (have) at least one solution for each [b1b2b3]∈S\begin{bmatrix} b_1 \\ b_2 \\ b_3 \end{bmatrix} \in S?
  1. (A)x+2y+3z=b1x + 2y + 3z = b_1, 4y+5z=b24y + 5z = b_2 and x+2y+6z=b3x + 2y + 6z = b_3
  2. (B)x+y+3z=b1x + y + 3z = b_1, 5x+2y+6z=b25x + 2y + 6z = b_2 and −2x−y−3z=b3-2x - y - 3z = b_3
  3. (C)−x+2y−5z=b1-x + 2y - 5z = b_1, 2x−4y+10z=b22x - 4y + 10z = b_2 and x−2y+5z=b3x - 2y + 5z = b_3
  4. (D)x+2y+5z=b1x + 2y + 5z = b_1, 2x+3z=b22x + 3z = b_2 and x+4y−5z=b3x + 4y - 5z = b_3

Tests: Describe the consistent right-hand sides of a singular system and test other systems against them.

Show solution
  1. In the given system the yy-column is −2-2 times the xx-column, and the columns (−1,2,1)(-1, 2, 1), (5,3,2)(5, 3, 2) are independent, so the coefficient matrix has rank 2. SS is the plane spanned by these two columns.
  2. Normal to that plane: (−1,2,1)×(5,3,2)=(1,7,−13)(-1, 2, 1) \times (5, 3, 2) = (1, 7, -13). So S={ b:b1+7b2−13b3=0 }S = \{\, b : b_1 + 7b_2 - 13b_3 = 0 \,\}.
  3. (A): det⁡[123045126]=1(24−10)−2(0−5)+3(0−4)=12≠0\det\begin{bmatrix} 1 & 2 & 3 \\ 0 & 4 & 5 \\ 1 & 2 & 6 \end{bmatrix} = 1(24 - 10) - 2(0 - 5) + 3(0 - 4) = 12 \ne 0. Solvable for every bb, so for every b∈Sb \in S. True.
  4. (B): det⁡=1(−6+6)−1(−15+12)+3(−5+4)=0\det = 1(-6 + 6) - 1(-15 + 12) + 3(-5 + 4) = 0. The rows satisfy 1⋅R1+1⋅R2+3⋅R3=01\cdot R_1 + 1\cdot R_2 + 3\cdot R_3 = 0, so it is solvable only when b1+b2+3b3=0b_1 + b_2 + 3b_3 = 0, which does not follow from b1+7b2−13b3=0b_1 + 7b_2 - 13b_3 = 0 (e.g. b=(13,0,1)∈Sb = (13, 0, 1) \in S gives 16≠016 \ne 0). False.
  5. (C): every row is a multiple of (1,−2,5)(1, -2, 5), so it needs b2=−2b1b_2 = -2b_1 and b3=−b1b_3 = -b_1; b=(13,0,1)∈Sb = (13, 0, 1) \in S breaks this. False.
  6. (D): det⁡[12520314−5]=1(0−12)−2(−10−3)+5(8−0)=54≠0\det\begin{bmatrix} 1 & 2 & 5 \\ 2 & 0 & 3 \\ 1 & 4 & -5 \end{bmatrix} = 1(0 - 12) - 2(-10 - 3) + 5(8 - 0) = 54 \ne 0. Always solvable. True.
AnswerAnswer: (A), (D)
Ask about this question
Q4

Mathematics, Question 4 (4 marks)

Conic sections (common tangents, ellipse) · +4 / −2
Consider two straight lines, each of which is tangent to both the circle x2+y2=12x^2 + y^2 = \dfrac{1}{2} and the parabola y2=4xy^2 = 4x. Let these lines intersect at the point QQ. Consider the ellipse whose center is at the origin O(0,0)O(0, 0) and whose semi-major axis is OQOQ. If the length of the minor axis of this ellipse is 2\sqrt{2}, then which of the following statement(s) is (are) TRUE?
  1. (A)For the ellipse, the eccentricity is 12\dfrac{1}{\sqrt{2}} and the length of the latus rectum is 1
  2. (B)For the ellipse, the eccentricity is 12\dfrac{1}{2} and the length of the latus rectum is 12\dfrac{1}{2}
  3. (C)The area of the region bounded by the ellipse between the lines x=12x = \dfrac{1}{\sqrt{2}} and x=1x = 1 is 142(π−2)\dfrac{1}{4\sqrt{2}}(\pi - 2)
  4. (D)The area of the region bounded by the ellipse between the lines x=12x = \dfrac{1}{\sqrt{2}} and x=1x = 1 is 116(π−2)\dfrac{1}{16}(\pi - 2)

Tests: Find common tangents of a circle and a parabola, then use the ellipse they define for eccentricity, latus rectum and area.

Show solution
  1. A tangent to y2=4xy^2 = 4x is y=mx+1my = mx + \dfrac{1}{m}. Tangent to the circle: ∣1/m∣1+m2=12\dfrac{|1/m|}{\sqrt{1 + m^2}} = \dfrac{1}{\sqrt{2}}, so m2(1+m2)=2m^2(1 + m^2) = 2, m2=1m^2 = 1.
  2. The lines are y=x+1y = x + 1 and y=−x−1y = -x - 1; they meet at Q(−1,0)Q(-1, 0), so a=OQ=1a = OQ = 1. Minor axis 2\sqrt{2} gives b=12b = \dfrac{1}{\sqrt{2}}. Ellipse: x2+2y2=1x^2 + 2y^2 = 1.
  3. e2=1−b2a2=12e^2 = 1 - \dfrac{b^2}{a^2} = \dfrac{1}{2}, e=12e = \dfrac{1}{\sqrt{2}}; latus rectum =2b2a=1= \dfrac{2b^2}{a} = 1. (A) True, (B) False.
  4. Area =2∫1/211−x22 dx=2∫1/211−x2 dx= 2\displaystyle\int_{1/\sqrt{2}}^{1} \sqrt{\dfrac{1 - x^2}{2}}\,dx = \sqrt{2}\int_{1/\sqrt{2}}^{1} \sqrt{1 - x^2}\,dx.
  5. ∫1−x2 dx=x1−x22+sin⁡−1x2\displaystyle\int \sqrt{1 - x^2}\,dx = \dfrac{x\sqrt{1 - x^2}}{2} + \dfrac{\sin^{-1}x}{2}, so the definite integral is π4−(14+π8)=π−28\dfrac{\pi}{4} - \left(\dfrac{1}{4} + \dfrac{\pi}{8}\right) = \dfrac{\pi - 2}{8}.
  6. Area =2⋅π−28=π−242= \sqrt{2} \cdot \dfrac{\pi - 2}{8} = \dfrac{\pi - 2}{4\sqrt{2}}. (C) True, (D) False.
AnswerAnswer: (A), (C)
Ask about this question
Q5

Mathematics, Question 5 (4 marks)

Complex numbers (lines in the Argand plane) · +4 / −2
Let s,t,rs, t, r be non-zero complex numbers and LL be the set of solutions z=x+iyz = x + iy (x,y∈Rx, y \in \mathbb{R}, i=−1i = \sqrt{-1}) of the equation sz+tzˉ+r=0sz + t\bar{z} + r = 0, where zˉ=x−iy\bar{z} = x - iy. Then, which of the following statement(s) is (are) TRUE?
  1. (A)If LL has exactly one element, then ∣s∣≠∣t∣|s| \ne |t|
  2. (B)If ∣s∣=∣t∣|s| = |t|, then LL has infinitely many elements
  3. (C)The number of elements in L∩{z:∣z−1+i∣=5}L \cap \{z : |z - 1 + i| = 5\} is at most 2
  4. (D)If LL has more than one element, then LL has infinitely many elements

Tests: Classify the solution set of sz + t z̄ + r = 0 as a point, a line or empty.

Show solution
  1. Take the conjugate: tˉz+sˉzˉ+rˉ=0\bar{t}z + \bar{s}\bar{z} + \bar{r} = 0. Eliminate zˉ\bar{z} (multiply the first by sˉ\bar{s}, the second by tt, subtract): (∣s∣2−∣t∣2)z=trˉ−sˉr(|s|^2 - |t|^2)z = t\bar{r} - \bar{s}r.
  2. If ∣s∣≠∣t∣|s| \ne |t|: exactly one zz, which does satisfy the equation. If ∣s∣=∣t∣|s| = |t|: either trˉ≠sˉrt\bar{r} \ne \bar{s}r and there is no solution, or the two equations are the same and LL is a straight line (infinitely many points).

    Why: Writing z = x + iy, the equation is two real linear equations in x, y: a point, a line, or nothing.

  3. (A): one element forces the case ∣s∣≠∣t∣|s| \ne |t|. True. (B): with ∣s∣=∣t∣|s| = |t| the set can be empty (e.g. s=t=1s = t = 1, r=ir = i: 2x+i=02x + i = 0 has no solution). False.
  4. (C): LL is empty, a single point, or a line, and a line meets a circle in at most 2 points. True. (D): more than one element rules out the single-point case, so LL is a line. True.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Differential equations and limits · +4 / −2
Let f:(0,π)→Rf : (0, \pi) \rightarrow \mathbb{R} be a twice differentiable function such that lim⁡t→xf(x)sin⁡t−f(t)sin⁡xt−x=sin⁡2x\displaystyle\lim_{t \to x} \dfrac{f(x)\sin t - f(t)\sin x}{t - x} = \sin^2 x for all x∈(0,π)x \in (0, \pi). If f(π6)=−π12f\left(\dfrac{\pi}{6}\right) = -\dfrac{\pi}{12}, then which of the following statement(s) is (are) TRUE?
  1. (A)f(π4)=π42f\left(\dfrac{\pi}{4}\right) = \dfrac{\pi}{4\sqrt{2}}
  2. (B)f(x)<x46−x2f(x) < \dfrac{x^4}{6} - x^2 for all x∈(0,π)x \in (0, \pi)
  3. (C)There exists α∈(0,π)\alpha \in (0, \pi) such that f′(α)=0f'(\alpha) = 0
  4. (D)f′′(π2)+f(π2)=0f''\left(\dfrac{\pi}{2}\right) + f\left(\dfrac{\pi}{2}\right) = 0

Tests: Turn a limit into a derivative, spot the quotient rule, and solve for f.

Show solution
  1. The limit is the derivative in tt of f(x)sin⁡t−f(t)sin⁡xf(x)\sin t - f(t)\sin x at t=xt = x: f(x)cos⁡x−f′(x)sin⁡x=sin⁡2xf(x)\cos x - f'(x)\sin x = \sin^2 x.
  2. Divide by −sin⁡2x-\sin^2 x: f′(x)sin⁡x−f(x)cos⁡xsin⁡2x=−1\dfrac{f'(x)\sin x - f(x)\cos x}{\sin^2 x} = -1, i.e. ddx(f(x)sin⁡x)=−1\dfrac{d}{dx}\left(\dfrac{f(x)}{\sin x}\right) = -1, so f(x)sin⁡x=−x+c\dfrac{f(x)}{\sin x} = -x + c.
  3. At x=π6x = \dfrac{\pi}{6}: −π/121/2=−π6=−π6+c\dfrac{-\pi/12}{1/2} = -\dfrac{\pi}{6} = -\dfrac{\pi}{6} + c, so c=0c = 0 and f(x)=−xsin⁡xf(x) = -x\sin x.
  4. (A): f(π4)=−π4⋅12=−π42f\left(\dfrac{\pi}{4}\right) = -\dfrac{\pi}{4}\cdot\dfrac{1}{\sqrt{2}} = -\dfrac{\pi}{4\sqrt{2}}. False (sign).
  5. (B): −xsin⁡x<x46−x2  ⟺  sin⁡x>x−x36-x\sin x < \dfrac{x^4}{6} - x^2 \iff \sin x > x - \dfrac{x^3}{6} (divide by −x<0-x < 0), which holds for every x>0x > 0. True.

    Why: g(x) = sin x − x + x³/6 has g(0) = g'(0) = g''(0) = 0 and g'''(x) = 1 − cos x ≥ 0, so g > 0 for x > 0.

  6. (C): f′(x)=−sin⁡x−xcos⁡xf'(x) = -\sin x - x\cos x; f′(α)=0  ⟺  tan⁡α=−αf'(\alpha) = 0 \iff \tan\alpha = -\alpha, which has a root in (π2,π)\left(\dfrac{\pi}{2}, \pi\right) (tan⁡x\tan x runs from −∞-\infty up to 00 there, while −x-x stays between −π-\pi and −π/2-\pi/2). True.
  7. (D): f′′(x)=−2cos⁡x+xsin⁡xf''(x) = -2\cos x + x\sin x, so f′′(π2)=π2f''\left(\dfrac{\pi}{2}\right) = \dfrac{\pi}{2} and f(π2)=−π2f\left(\dfrac{\pi}{2}\right) = -\dfrac{\pi}{2}; the sum is 00. True.
AnswerAnswer: (B), (C), (D)
Ask about this question

Mathematics, Section 2: 8 questions, answer is a numerical value (truncated/rounded-off to the second decimal place): +3 if only the correct value is entered, 0 in all other cases

Q7

Mathematics, Question 7 (3 marks)

Definite integration · +3
The value of the integral ∫01/21+3((x+1)2(1−x)6)1/4 dx\displaystyle\int_{0}^{1/2} \dfrac{1 + \sqrt{3}}{\left((x+1)^2(1-x)^6\right)^{1/4}}\,dx is ______ .

Tests: Integrate a product of powers of (1 + x) and (1 − x) by the substitution u = (1 + x)/(1 − x).

Show solution
  1. ((x+1)2(1−x)6)1/4=(1+x)1/2(1−x)3/2=(1−x)21+x1−x\left((x+1)^2(1-x)^6\right)^{1/4} = (1+x)^{1/2}(1-x)^{3/2} = (1-x)^2\sqrt{\dfrac{1+x}{1-x}}.
  2. Put u=1+x1−xu = \dfrac{1+x}{1-x}, so du=2(1−x)2 dxdu = \dfrac{2}{(1-x)^2}\,dx; x=0⇒u=1x = 0 \Rightarrow u = 1, x=12⇒u=3x = \dfrac{1}{2} \Rightarrow u = 3.
  3. Integral =(1+3)∫13du2u=(1+3)[u]13=(1+3)(3−1)= (1 + \sqrt{3})\displaystyle\int_{1}^{3} \dfrac{du}{2\sqrt{u}} = (1 + \sqrt{3})\left[\sqrt{u}\right]_1^3 = (1 + \sqrt{3})(\sqrt{3} - 1).
  4. =3−1=2= 3 - 1 = 2.
AnswerAnswer: 2.00
Ask about this question
Q8

Mathematics, Question 8 (3 marks)

Determinants · +3
Let PP be a matrix of order 3×33 \times 3 such that all the entries in PP are from the set {−1,0,1}\{-1, 0, 1\}. Then, the maximum possible value of the determinant of PP is ______ .

Tests: Bound a determinant term by term and show the bound is reached.

Show solution
  1. det⁡P\det P is a sum of 6 terms, each a product of three entries with a sign: three "+" terms and three "−" terms. Each term is −1-1, 00 or 11.
  2. If some entry is 00, it sits in 2 of the 6 terms, so at most 4 terms are nonzero and det⁡P≤4\det P \le 4.
  3. If no entry is 00, all 6 terms are ±1\pm 1 and their sum is even, so det⁡P≤6\det P \le 6. For 6, the three "+" products must each be 11 and the three "−" products each −1-1. But each group of three products multiplies to the product of all nine entries, call it Π\Pi: then Π=1\Pi = 1 from the first group and Π=−1\Pi = -1 from the second, a contradiction. So det⁡P≤4\det P \le 4.
  4. 4 is reached: det⁡[111−1111−11]=1(1+1)−1(−1−1)+1(1−1)=4\det\begin{bmatrix} 1 & 1 & 1 \\ -1 & 1 & 1 \\ 1 & -1 & 1 \end{bmatrix} = 1(1 + 1) - 1(-1 - 1) + 1(1 - 1) = 4.
AnswerAnswer: 4.00
Ask about this question
Q9

Mathematics, Question 9 (3 marks)

Permutations and combinations (functions) · +3
Let XX be a set with exactly 5 elements and YY be a set with exactly 7 elements. If α\alpha is the number of one-one functions from XX to YY and β\beta is the number of onto functions from YY to XX, then the value of 15!(β−α)\dfrac{1}{5!}(\beta - \alpha) is ______ .

Tests: Count one-one and onto functions between finite sets.

Show solution
  1. One-one functions X→YX \rightarrow Y: α=7P5=7⋅6⋅5⋅4⋅3=2520\alpha = {}^7P_5 = 7 \cdot 6 \cdot 5 \cdot 4 \cdot 3 = 2520.
  2. Onto functions Y→XY \rightarrow X: split the 7 elements into 5 non-empty groups, then assign the groups to the 5 elements of XX. Group sizes are 3,1,1,1,13,1,1,1,1 or 2,2,1,1,12,2,1,1,1: (73)+12(72)(52)=35+105=140\dbinom{7}{3} + \dfrac{1}{2}\dbinom{7}{2}\dbinom{5}{2} = 35 + 105 = 140 partitions.
  3. β=140×5!=16800\beta = 140 \times 5! = 16800.
  4. β−α5!=16800−2520120=14280120=119\dfrac{\beta - \alpha}{5!} = \dfrac{16800 - 2520}{120} = \dfrac{14280}{120} = 119.
AnswerAnswer: 119.00
Ask about this question
Q10

Mathematics, Question 10 (3 marks)

Differential equations · +3
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be a differentiable function with f(0)=0f(0) = 0. If y=f(x)y = f(x) satisfies the differential equation dydx=(2+5y)(5y−2)\dfrac{dy}{dx} = (2 + 5y)(5y - 2), then the value of lim⁡x→−∞f(x)\displaystyle\lim_{x \to -\infty} f(x) is ______ .

Tests: Solve a separable equation and read off the limiting value from the equilibria.

Show solution
  1. dydx=25y2−4\dfrac{dy}{dx} = 25y^2 - 4. Separate: ∫dy(5y−2)(5y+2)=120ln⁡∣5y−25y+2∣=x+C\displaystyle\int \dfrac{dy}{(5y - 2)(5y + 2)} = \dfrac{1}{20}\ln\left|\dfrac{5y - 2}{5y + 2}\right| = x + C.
  2. At x=0x = 0, y=0y = 0: ln⁡1=0\ln 1 = 0, so C=0C = 0 and ∣5y−25y+2∣=e20x\left|\dfrac{5y - 2}{5y + 2}\right| = e^{20x}.
  3. At y=0y = 0 the ratio is −1-1, and yy cannot cross the constant solutions ±25\pm\dfrac{2}{5}, so 5y−25y+2=−e20x\dfrac{5y - 2}{5y + 2} = -e^{20x}.
  4. As x→−∞x \to -\infty, e20x→0e^{20x} \to 0, so 5y−2→05y - 2 \to 0: y→25=0.4y \to \dfrac{2}{5} = 0.4.

    Why: Check: at y = 0 the slope is −4 < 0, so going left y increases towards the equilibrium 2/5.

AnswerAnswer: 0.40
Ask about this question
Q11

Mathematics, Question 11 (3 marks)

Functional equations · +3
Let f:R→Rf : \mathbb{R} \rightarrow \mathbb{R} be a differentiable function with f(0)=1f(0) = 1 and satisfying the equation f(x+y)=f(x)f′(y)+f′(x)f(y)f(x + y) = f(x)f'(y) + f'(x)f(y) for all x,y∈Rx, y \in \mathbb{R}. Then, the value of log⁡e(f(4))\log_e(f(4)) is ______ .

Tests: Use special values in a functional equation to get a differential equation.

Show solution
  1. Put x=y=0x = y = 0: f(0)=2f(0)f′(0)f(0) = 2f(0)f'(0), so f′(0)=12f'(0) = \dfrac{1}{2}.
  2. Put y=0y = 0: f(x)=f(x)f′(0)+f′(x)f(0)=12f(x)+f′(x)f(x) = f(x)f'(0) + f'(x)f(0) = \dfrac{1}{2}f(x) + f'(x), so f′(x)=12f(x)f'(x) = \dfrac{1}{2}f(x).
  3. With f(0)=1f(0) = 1: f(x)=ex/2f(x) = e^{x/2}. (Check: ex/2⋅12ey/2+12ex/2⋅ey/2=e(x+y)/2e^{x/2}\cdot\tfrac{1}{2}e^{y/2} + \tfrac{1}{2}e^{x/2}\cdot e^{y/2} = e^{(x+y)/2}.)
  4. log⁡ef(4)=log⁡ee2=2\log_e f(4) = \log_e e^{2} = 2.
AnswerAnswer: 2.00
Ask about this question
Q12

Mathematics, Question 12 (3 marks)

3D geometry (image of a point in a plane) · +3
Let PP be a point in the first octant, whose image QQ in the plane x+y=3x + y = 3 (that is, the line segment PQPQ is perpendicular to the plane x+y=3x + y = 3 and the mid-point of PQPQ lies in the plane x+y=3x + y = 3) lies on the zz-axis. Let the distance of PP from the xx-axis be 5. If RR is the image of PP in the xyxy-plane, then the length of PRPR is ______ .

Tests: Find a point from its mirror image in a plane and its distance from an axis.

Show solution
  1. Q=(0,0,q)Q = (0, 0, q) on the zz-axis. PQPQ is along the normal (1,1,0)(1, 1, 0), so P=(λ,λ,q)P = (\lambda, \lambda, q).
  2. The midpoint (λ2,λ2,q)\left(\dfrac{\lambda}{2}, \dfrac{\lambda}{2}, q\right) lies on x+y=3x + y = 3: λ=3\lambda = 3, so P=(3,3,q)P = (3, 3, q).
  3. Distance from the xx-axis: 32+q2=5\sqrt{3^2 + q^2} = 5, so q=4q = 4 (PP is in the first octant).
  4. R=(3,3,−4)R = (3, 3, -4), so PR=2×4=8PR = 2 \times 4 = 8.
AnswerAnswer: 8.00
Ask about this question
Q13

Mathematics, Question 13 (3 marks)

Vector algebra (vector triple product) · +3
Consider the cube in the first octant with sides OPOP, OQOQ and OROR of length 1, along the xx-axis, yy-axis and zz-axis, respectively, where O(0,0,0)O(0, 0, 0) is the origin. Let S(12,12,12)S\left(\dfrac{1}{2}, \dfrac{1}{2}, \dfrac{1}{2}\right) be the centre of the cube and TT be the vertex of the cube opposite to the origin OO such that SS lies on the diagonal OTOT. If p⃗=SP→\vec{p} = \overrightarrow{SP}, q⃗=SQ→\vec{q} = \overrightarrow{SQ}, r⃗=SR→\vec{r} = \overrightarrow{SR} and t⃗=ST→\vec{t} = \overrightarrow{ST}, then the value of ∣(p⃗×q⃗)×(r⃗×t⃗)∣\left|(\vec{p} \times \vec{q}) \times (\vec{r} \times \vec{t})\right| is ______ .

Tests: Compute a cross product of cross products with coordinates.

Show solution
  1. P=(1,0,0)P = (1, 0, 0), Q=(0,1,0)Q = (0, 1, 0), R=(0,0,1)R = (0, 0, 1), T=(1,1,1)T = (1, 1, 1). So p⃗=12(1,−1,−1)\vec{p} = \tfrac{1}{2}(1, -1, -1), q⃗=12(−1,1,−1)\vec{q} = \tfrac{1}{2}(-1, 1, -1), r⃗=12(−1,−1,1)\vec{r} = \tfrac{1}{2}(-1, -1, 1), t⃗=12(1,1,1)\vec{t} = \tfrac{1}{2}(1, 1, 1).
  2. p⃗×q⃗=14(1,−1,−1)×(−1,1,−1)=14(2,2,0)=(12,12,0)\vec{p} \times \vec{q} = \tfrac{1}{4}(1, -1, -1) \times (-1, 1, -1) = \tfrac{1}{4}(2, 2, 0) = \left(\tfrac{1}{2}, \tfrac{1}{2}, 0\right).
  3. r⃗×t⃗=14(−1,−1,1)×(1,1,1)=14(−2,2,0)=(−12,12,0)\vec{r} \times \vec{t} = \tfrac{1}{4}(-1, -1, 1) \times (1, 1, 1) = \tfrac{1}{4}(-2, 2, 0) = \left(-\tfrac{1}{2}, \tfrac{1}{2}, 0\right).
  4. (12,12,0)×(−12,12,0)=(0,0,14+14)=(0,0,12)\left(\tfrac{1}{2}, \tfrac{1}{2}, 0\right) \times \left(-\tfrac{1}{2}, \tfrac{1}{2}, 0\right) = \left(0, 0, \tfrac{1}{4} + \tfrac{1}{4}\right) = \left(0, 0, \tfrac{1}{2}\right), magnitude 12\tfrac{1}{2}.
AnswerAnswer: 0.50
Ask about this question
Q14

Mathematics, Question 14 (3 marks)

Binomial theorem (sums of binomial coefficients) · +3
Let X=(10C1)2+2(10C2)2+3(10C3)2+⋯+10(10C10)2X = \left({}^{10}C_1\right)^2 + 2\left({}^{10}C_2\right)^2 + 3\left({}^{10}C_3\right)^2 + \cdots + 10\left({}^{10}C_{10}\right)^2, where  10Cr\,{}^{10}C_r, r∈{1,2,…,10}r \in \{1, 2, \ldots, 10\} denote binomial coefficients. Then, the value of 11430X\dfrac{1}{1430}X is ______ .

Tests: Evaluate a weighted sum of squared binomial coefficients with Vandermonde's identity.

Show solution
  1. X=∑r=110r 10Cr 10CrX = \displaystyle\sum_{r=1}^{10} r\,{}^{10}C_r\,{}^{10}C_r, and r 10Cr=10 9Cr−1r\,{}^{10}C_r = 10\,{}^{9}C_{r-1}.
  2. So X=10∑r=1109Cr−1 10C10−rX = 10\displaystyle\sum_{r=1}^{10} {}^{9}C_{r-1}\,{}^{10}C_{10-r}, the coefficient count of choosing 99 from 9+109 + 10 (Vandermonde): X=10 19C9X = 10\,{}^{19}C_{9}.

    Why: The lower indices (r − 1) + (10 − r) always add to 9.

  3.  19C9=92378\,{}^{19}C_9 = 92378, so X=923780X = 923780.
  4. X1430=9237801430=646\dfrac{X}{1430} = \dfrac{923780}{1430} = 646.
AnswerAnswer: 646.00
Ask about this question

Mathematics, Section 3: 4 questions, each with two matching lists (List-I and List-II) and four options, only one correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Mathematics, Question 15 (3 marks)

Functions (domain and range) · +3 / −1
Let E1={x∈R:x≠1 and xx−1>0}E_1 = \left\{x \in \mathbb{R} : x \ne 1 \text{ and } \dfrac{x}{x - 1} > 0\right\} and E2={x∈E1:sin⁡−1(log⁡e(xx−1)) is a real number}E_2 = \left\{x \in E_1 : \sin^{-1}\left(\log_e\left(\dfrac{x}{x - 1}\right)\right) \text{ is a real number}\right\}. (Here, the inverse trigonometric function sin⁡−1x\sin^{-1}x assumes values in [−π2,π2]\left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right].) Let f:E1→Rf : E_1 \rightarrow \mathbb{R} be the function defined by f(x)=log⁡e(xx−1)f(x) = \log_e\left(\dfrac{x}{x - 1}\right) and g:E2→Rg : E_2 \rightarrow \mathbb{R} be the function defined by g(x)=sin⁡−1(log⁡e(xx−1))g(x) = \sin^{-1}\left(\log_e\left(\dfrac{x}{x - 1}\right)\right). Match List-I with List-II.
List-IList-II
(P) The range of ff is(1) (−∞,11−e]∪[ee−1,∞)\left(-\infty, \dfrac{1}{1 - e}\right] \cup \left[\dfrac{e}{e - 1}, \infty\right)
(Q) The range of gg contains(2) (0,1)(0, 1)
(R) The domain of ff contains(3) [−12,12]\left[-\dfrac{1}{2}, \dfrac{1}{2}\right]
(S) The domain of gg is(4) (−∞,0)∪(0,∞)(-\infty, 0) \cup (0, \infty)
(5) (−∞,ee−1]\left(-\infty, \dfrac{e}{e - 1}\right]
(6) (−∞,0)∪(12,ee−1](-\infty, 0) \cup \left(\dfrac{1}{2}, \dfrac{e}{e - 1}\right]
  1. (A)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 1
  2. (B)P →\rightarrow 3; Q →\rightarrow 3; R →\rightarrow 6; S →\rightarrow 5
  3. (C)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 6
  4. (D)P →\rightarrow 4; Q →\rightarrow 3; R →\rightarrow 6; S →\rightarrow 5

Tests: Find domains and ranges of log and inverse-sine compositions with a rational argument.

Show solution
  1. xx−1>0  ⟺  x<0\dfrac{x}{x-1} > 0 \iff x < 0 or x>1x > 1, so E1=(−∞,0)∪(1,∞)E_1 = (-\infty, 0) \cup (1, \infty). On E1E_1, u=xx−1=1+1x−1u = \dfrac{x}{x-1} = 1 + \dfrac{1}{x-1} takes every positive value except 11.
  2. (P): ln⁡u\ln u takes every real value except ln⁡1=0\ln 1 = 0: range of ff is (−∞,0)∪(0,∞)(-\infty, 0) \cup (0, \infty). P → 4.
  3. (S): need −1≤ln⁡u≤1-1 \le \ln u \le 1, i.e. 1e≤1+1x−1≤e\dfrac{1}{e} \le 1 + \dfrac{1}{x-1} \le e. For x>1x > 1: 1x−1≤e−1  ⟺  x≥ee−1\dfrac{1}{x-1} \le e - 1 \iff x \ge \dfrac{e}{e-1}. For x<0x < 0: 1x−1≥1−ee  ⟺  x−1≤−ee−1  ⟺  x≤11−e\dfrac{1}{x-1} \ge \dfrac{1-e}{e} \iff x - 1 \le -\dfrac{e}{e-1} \iff x \le \dfrac{1}{1-e}. So E2=(−∞,11−e]∪[ee−1,∞)E_2 = \left(-\infty, \dfrac{1}{1-e}\right] \cup \left[\dfrac{e}{e-1}, \infty\right). S → 1.
  4. (Q): on E2E_2, ln⁡u\ln u takes [−1,1][-1, 1] except 00, so the range of gg is sin⁡−1\sin^{-1} of [−1,1]∖{0}[-1, 1] \setminus \{0\}, i.e. [−π2,π2]∖{0}\left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right] \setminus \{0\}. This contains (0,1)(0, 1) since 1<π21 < \dfrac{\pi}{2}; it does not contain 0∈[−12,12]0 \in \left[-\tfrac{1}{2}, \tfrac{1}{2}\right]. Q → 2.
  5. (R): E1=(−∞,0)∪(1,∞)E_1 = (-\infty, 0) \cup (1, \infty) contains set 1, because 11−e<0\dfrac{1}{1-e} < 0 and ee−1>1\dfrac{e}{e-1} > 1. Set 6 contains (12,1]\left(\tfrac{1}{2}, 1\right], which is outside E1E_1. R → 1.
  6. P → 4, Q → 2, R → 1, S → 1 is option (A).
AnswerAnswer: (A)
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Permutations and combinations (selections) · +3 / −1
In a high school, a committee has to be formed from a group of 6 boys M1,M2,M3,M4,M5,M6M_1, M_2, M_3, M_4, M_5, M_6 and 5 girls G1,G2,G3,G4,G5G_1, G_2, G_3, G_4, G_5. (i) Let α1\alpha_1 be the total number of ways in which the committee can be formed such that the committee has 5 members, having exactly 3 boys and 2 girls. (ii) Let α2\alpha_2 be the total number of ways in which the committee can be formed such that the committee has at least 2 members, and having an equal number of boys and girls. (iii) Let α3\alpha_3 be the total number of ways in which the committee can be formed such that the committee has 5 members, at least 2 of them being girls. (iv) Let α4\alpha_4 be the total number of ways in which the committee can be formed such that the committee has 4 members, having at least 2 girls and such that both M1M_1 and G1G_1 are NOT in the committee together. Match List-I with List-II.
List-IList-II
(P) The value of α1\alpha_1 is(1) 136
(Q) The value of α2\alpha_2 is(2) 189
(R) The value of α3\alpha_3 is(3) 192
(S) The value of α4\alpha_4 is(4) 200
(5) 381
(6) 461
  1. (A)P →\rightarrow 4; Q →\rightarrow 6; R →\rightarrow 2; S →\rightarrow 1
  2. (B)P →\rightarrow 1; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 3
  3. (C)P →\rightarrow 4; Q →\rightarrow 6; R →\rightarrow 5; S →\rightarrow 2
  4. (D)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 3; S →\rightarrow 1

Tests: Count committees with gender and inclusion/exclusion conditions.

Show solution
  1. (P): α1=(63)(52)=20×10=200\alpha_1 = \dbinom{6}{3}\dbinom{5}{2} = 20 \times 10 = 200. P → 4.
  2. (Q): α2=∑k=15(6k)(5k)=30+150+200+75+6=461\alpha_2 = \displaystyle\sum_{k=1}^{5} \dbinom{6}{k}\dbinom{5}{k} = 30 + 150 + 200 + 75 + 6 = 461. (Shortcut: ∑k=05(6k)(55−k)=(115)=462\sum_{k=0}^{5}\dbinom{6}{k}\dbinom{5}{5-k} = \dbinom{11}{5} = 462, minus the empty committee.) Q → 6.
  3. (R): all 5-member committees minus those with 0 or 1 girl: (115)−(65)−(64)(51)=462−6−75=381\dbinom{11}{5} - \dbinom{6}{5} - \dbinom{6}{4}\dbinom{5}{1} = 462 - 6 - 75 = 381. R → 5.
  4. (S): 4 members with at least 2 girls: (52)(62)+(53)(61)+(54)=150+60+5=215\dbinom{5}{2}\dbinom{6}{2} + \dbinom{5}{3}\dbinom{6}{1} + \dbinom{5}{4} = 150 + 60 + 5 = 215.
  5. Remove those containing both M1M_1 and G1G_1: the other 2 members come from 5 boys and 4 girls with at least one girl: (92)−(52)=36−10=26\dbinom{9}{2} - \dbinom{5}{2} = 36 - 10 = 26. So α4=215−26=189\alpha_4 = 215 - 26 = 189. S → 2.
  6. P → 4, Q → 6, R → 5, S → 2 is option (C).
AnswerAnswer: (C)
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Hyperbola · +3 / −1
Let H:x2a2−y2b2=1H : \dfrac{x^2}{a^2} - \dfrac{y^2}{b^2} = 1, where a>b>0a > b > 0, be a hyperbola in the xyxy-plane whose conjugate axis LMLM subtends an angle of 60∘60^\circ at one of its vertices NN. Let the area of the triangle LMNLMN be 434\sqrt{3}. Match List-I with List-II.
List-IList-II
(P) The length of the conjugate axis of HH is(1) 8
(Q) The eccentricity of HH is(2) 43\dfrac{4}{\sqrt{3}}
(R) The distance between the foci of HH is(3) 23\dfrac{2}{\sqrt{3}}
(S) The length of the latus rectum of HH is(4) 4
  1. (A)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 3
  2. (B)P →\rightarrow 4; Q →\rightarrow 3; R →\rightarrow 1; S →\rightarrow 2
  3. (C)P →\rightarrow 4; Q →\rightarrow 1; R →\rightarrow 3; S →\rightarrow 2
  4. (D)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 1

Tests: Use the angle and area at a vertex to find a and b of a hyperbola, then its standard lengths.

Show solution
  1. L=(0,b)L = (0, b), M=(0,−b)M = (0, -b), N=(a,0)N = (a, 0). By symmetry ONON bisects the 60∘60^\circ angle: tan⁡30∘=ba\tan 30^\circ = \dfrac{b}{a}, so a=3 ba = \sqrt{3}\,b (consistent with a>ba > b).
  2. Area =12(2b)(a)=ab=3 b2=43= \dfrac{1}{2}(2b)(a) = ab = \sqrt{3}\,b^2 = 4\sqrt{3}, so b=2b = 2, a=23a = 2\sqrt{3}.
  3. (P): conjugate axis 2b=42b = 4. P → 4. (Q): e=1+b2a2=1+13=23e = \sqrt{1 + \dfrac{b^2}{a^2}} = \sqrt{1 + \dfrac{1}{3}} = \dfrac{2}{\sqrt{3}}. Q → 3.
  4. (R): 2ae=2⋅23⋅23=82ae = 2 \cdot 2\sqrt{3} \cdot \dfrac{2}{\sqrt{3}} = 8. R → 1. (S): 2b2a=823=43\dfrac{2b^2}{a} = \dfrac{8}{2\sqrt{3}} = \dfrac{4}{\sqrt{3}}. S → 2.
  5. P → 4, Q → 3, R → 1, S → 2 is option (B).
AnswerAnswer: (B)
Ask about this question
Q18

Mathematics, Question 18 (3 marks)

Continuity and differentiability · +3 / −1
Let f1:R→Rf_1 : \mathbb{R} \rightarrow \mathbb{R}, f2:(−π2,π2)→Rf_2 : \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right) \rightarrow \mathbb{R}, f3:(−1,eπ/2−2)→Rf_3 : \left(-1, e^{\pi/2} - 2\right) \rightarrow \mathbb{R} and f4:R→Rf_4 : \mathbb{R} \rightarrow \mathbb{R} be functions defined by (i) f1(x)=sin⁡(1−e−x2)f_1(x) = \sin\left(\sqrt{1 - e^{-x^2}}\right), (ii) f2(x)=∣sin⁡x∣tan⁡−1xf_2(x) = \dfrac{|\sin x|}{\tan^{-1}x} if x≠0x \ne 0 and f2(x)=1f_2(x) = 1 if x=0x = 0, where the inverse trigonometric function tan⁡−1x\tan^{-1}x assumes values in (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right), (iii) f3(x)=[sin⁡(log⁡e(x+2))]f_3(x) = [\sin(\log_e(x + 2))], where, for t∈Rt \in \mathbb{R}, [t][t] denotes the greatest integer less than or equal to tt, (iv) f4(x)=x2sin⁡(1x)f_4(x) = x^2\sin\left(\dfrac{1}{x}\right) if x≠0x \ne 0 and f4(x)=0f_4(x) = 0 if x=0x = 0. Match List-I with List-II.
List-IList-II
(P) The function f1f_1 is(1) NOT continuous at x=0x = 0
(Q) The function f2f_2 is(2) continuous at x=0x = 0 and NOT differentiable at x=0x = 0
(R) The function f3f_3 is(3) differentiable at x=0x = 0 and its derivative is NOT continuous at x=0x = 0
(S) The function f4f_4 is(4) differentiable at x=0x = 0 and its derivative is continuous at x=0x = 0
  1. (A)P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 1; S →\rightarrow 4
  2. (B)P →\rightarrow 4; Q →\rightarrow 1; R →\rightarrow 2; S →\rightarrow 3
  3. (C)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 3
  4. (D)P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 4; S →\rightarrow 3

Tests: Classify functions at a point: continuous, differentiable, continuously differentiable.

Show solution
  1. (P): f1f_1 is continuous. Near 00, 1−e−x2≈x21 - e^{-x^2} \approx x^2, so f1(h)−f1(0)h=sin⁡1−e−h2h≈∣h∣h→±1\dfrac{f_1(h) - f_1(0)}{h} = \dfrac{\sin\sqrt{1 - e^{-h^2}}}{h} \approx \dfrac{|h|}{h} \rightarrow \pm 1. Left and right derivatives differ. P → 2.
  2. (Q): as x→0+x \to 0^+, ∣sin⁡x∣tan⁡−1x→1\dfrac{|\sin x|}{\tan^{-1}x} \to 1; as x→0−x \to 0^-, −sin⁡xtan⁡−1x→−1\dfrac{-\sin x}{\tan^{-1}x} \to -1. The left limit is not f2(0)=1f_2(0) = 1. Q → 1.
  3. (R): on (−1,eπ/2−2)\left(-1, e^{\pi/2} - 2\right), x+2∈(1,eπ/2)x + 2 \in \left(1, e^{\pi/2}\right), so log⁡e(x+2)∈(0,π2)\log_e(x+2) \in \left(0, \dfrac{\pi}{2}\right) and sin⁡(⋅)∈(0,1)\sin(\cdot) \in (0, 1). Hence f3≡0f_3 \equiv 0: differentiable with continuous derivative. R → 4.
  4. (S): f4′(0)=lim⁡h→0hsin⁡1h=0f_4'(0) = \displaystyle\lim_{h \to 0} h\sin\dfrac{1}{h} = 0, so f4f_4 is differentiable. For x≠0x \ne 0, f4′(x)=2xsin⁡1x−cos⁡1xf_4'(x) = 2x\sin\dfrac{1}{x} - \cos\dfrac{1}{x}, which has no limit at 00. S → 3.
  5. P → 2, Q → 1, R → 4, S → 3 is option (D).
AnswerAnswer: (D)
Ask about this question

Questions are quoted from JEE (Advanced) 2018 Paper 2 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.