AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2022 Paper 1: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2022 Paper 1 solved step by step: Mathematics, Physics and Chemistry, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2022 Paper 1: 54 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2022: Paper 2.

Mathematics, Section 1: 8 questions, the answer is a numerical value (truncate or round off to two decimal places): +3 only if the correct value is entered, 0 in all other cases (no negative marks)

Q1

Mathematics, Question 1 (3 marks)

Inverse trigonometric functions · +3
Considering only the principal values of the inverse trigonometric functions, the value of 32cos⁡−122+π2+14sin⁡−122 π2+π2+tan⁡−12π\dfrac{3}{2}\cos^{-1}\sqrt{\dfrac{2}{2 + \pi^2}} + \dfrac{1}{4}\sin^{-1}\dfrac{2\sqrt{2}\,\pi}{2 + \pi^2} + \tan^{-1}\dfrac{\sqrt{2}}{\pi} is ______.

Tests: Put all three inverse functions in terms of one angle and use principal-value ranges to simplify.

Show solution
  1. Let θ=cos⁡−122+π2\theta = \cos^{-1}\sqrt{\dfrac{2}{2 + \pi^2}}. Then cos⁡θ=22+π2\cos\theta = \dfrac{\sqrt{2}}{\sqrt{2 + \pi^2}}, sin⁡θ=π2+π2\sin\theta = \dfrac{\pi}{\sqrt{2 + \pi^2}}, so tan⁡θ=π2\tan\theta = \dfrac{\pi}{\sqrt{2}} with θ∈(0,π/2)\theta \in (0, \pi/2).

    Why: A right triangle with legs √2 and π and hypotenuse √(2 + π²) holds all three terms.

  2. Third term: tan⁡−12π=cot⁡−1π2=π2−θ\tan^{-1}\dfrac{\sqrt{2}}{\pi} = \cot^{-1}\dfrac{\pi}{\sqrt{2}} = \dfrac{\pi}{2} - \theta.
  3. Second term: sin⁡2θ=2sin⁡θcos⁡θ=22 π2+π2\sin 2\theta = 2\sin\theta\cos\theta = \dfrac{2\sqrt{2}\,\pi}{2 + \pi^2}. Since tan⁡θ=π/2>1\tan\theta = \pi/\sqrt{2} > 1, θ>π/4\theta > \pi/4, so 2θ∈(π/2,π)2\theta \in (\pi/2, \pi) and sin⁡−1(sin⁡2θ)=π−2θ\sin^{-1}(\sin 2\theta) = \pi - 2\theta.

    Why: The principal value of sin⁻¹ lies in [−π/2, π/2], so 2θ itself is not allowed.

  4. Sum =32θ+14(π−2θ)+π2−θ=(32−12−1)θ+π4+π2=3π4= \dfrac{3}{2}\theta + \dfrac{1}{4}(\pi - 2\theta) + \dfrac{\pi}{2} - \theta = \left(\dfrac{3}{2} - \dfrac{1}{2} - 1\right)\theta + \dfrac{\pi}{4} + \dfrac{\pi}{2} = \dfrac{3\pi}{4}.
  5. 3π4=2.3561…\dfrac{3\pi}{4} = 2.3561\ldots, which rounds to 2.362.36 and truncates to 2.352.35. The paper allows either, so both are accepted.
AnswerAnswer: 2.36 (exactly 3π/43\pi/4; 2.35 by truncation is also accepted)
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Limits · +3
Let α\alpha be a positive real number. Let f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} and g:(α,∞)→Rg: (\alpha, \infty) \rightarrow \mathbb{R} be the functions defined by f(x)=sin⁡(πx12)f(x) = \sin\left(\dfrac{\pi x}{12}\right) and g(x)=2log⁡e(x−α)log⁡e(ex−eα)g(x) = \dfrac{2\log_e\left(\sqrt{x} - \sqrt{\alpha}\right)}{\log_e\left(e^{\sqrt{x}} - e^{\sqrt{\alpha}}\right)}. Then the value of lim⁡x→α+f(g(x))\lim\limits_{x \rightarrow \alpha^+} f(g(x)) is ______.

Tests: Evaluate a limit of the form ∞/∞ with logarithms by pulling out the dominant log term.

Show solution
  1. Let h=x−α→0+h = \sqrt{x} - \sqrt{\alpha} \rightarrow 0^+. Then ex−eα=eα(eh−1)e^{\sqrt{x}} - e^{\sqrt{\alpha}} = e^{\sqrt{\alpha}}(e^{h} - 1).
  2. log⁡e(ex−eα)=α+log⁡e(eh−1)=α+log⁡eh+log⁡eeh−1h\log_e\left(e^{\sqrt{x}} - e^{\sqrt{\alpha}}\right) = \sqrt{\alpha} + \log_e(e^h - 1) = \sqrt{\alpha} + \log_e h + \log_e\dfrac{e^h - 1}{h}, and the last term →log⁡e1=0\rightarrow \log_e 1 = 0.
  3. So g(x)=2log⁡ehlog⁡eh+α+o(1)=21+α+o(1)log⁡eh→2g(x) = \dfrac{2\log_e h}{\log_e h + \sqrt{\alpha} + o(1)} = \dfrac{2}{1 + \dfrac{\sqrt{\alpha} + o(1)}{\log_e h}} \rightarrow 2, because log⁡eh→−∞\log_e h \rightarrow -\infty.

    Why: Both numerator and denominator tend to −∞; dividing by log h shows the ratio tends to 2.

  4. ff is continuous, so the limit is f(2)=sin⁡2π12=sin⁡π6=12f(2) = \sin\dfrac{2\pi}{12} = \sin\dfrac{\pi}{6} = \dfrac{1}{2}.
AnswerAnswer: 0.50
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Probability and sets (inclusion-exclusion) · +3
In a study about a pandemic, data of 900 persons was collected. It was found that 190 persons had symptom of fever, 220 persons had symptom of cough, 220 persons had symptom of breathing problem, 330 persons had symptom of fever or cough or both, 350 persons had symptom of cough or breathing problem or both, 340 persons had symptom of fever or breathing problem or both, 30 persons had all three symptoms (fever, cough and breathing problem). If a person is chosen randomly from these 900 persons, then the probability that the person has at most one symptom is ______.

Tests: Use inclusion-exclusion to count people with none or exactly one of three attributes.

Show solution
  1. Pairs: n(F∩C)=190+220−330=80n(F \cap C) = 190 + 220 - 330 = 80, n(C∩B)=220+220−350=90n(C \cap B) = 220 + 220 - 350 = 90, n(F∩B)=190+220−340=70n(F \cap B) = 190 + 220 - 340 = 70; n(F∩C∩B)=30n(F \cap C \cap B) = 30.
  2. At least one symptom: n(F∪C∪B)=190+220+220−80−90−70+30=420n(F \cup C \cup B) = 190 + 220 + 220 - 80 - 90 - 70 + 30 = 420, so 900−420=480900 - 420 = 480 have none.
  3. Exactly one: fever only =190−80−70+30=70= 190 - 80 - 70 + 30 = 70, cough only =220−80−90+30=80= 220 - 80 - 90 + 30 = 80, breathing only =220−90−70+30=90= 220 - 90 - 70 + 30 = 90; total 240240.
  4. At most one symptom =480+240=720= 480 + 240 = 720, probability =720900=0.8= \dfrac{720}{900} = 0.8.
AnswerAnswer: 0.80
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Complex numbers · +3
Let zz be a complex number with non-zero imaginary part. If 2+3z+4z22−3z+4z2\dfrac{2 + 3z + 4z^2}{2 - 3z + 4z^2} is a real number, then the value of ∣z∣2|z|^2 is ______.

Tests: Reduce a 'real ratio' condition to Im(4z + 2/z) = 0 and solve for |z|.

Show solution
  1. Divide numerator and denominator by zz (z≠0z \ne 0): the ratio is u+3u−3\dfrac{u + 3}{u - 3} with u=4z+2zu = 4z + \dfrac{2}{z}.
  2. If u+3u−3=k\dfrac{u + 3}{u - 3} = k is real, then u=3(k+1)k−1u = \dfrac{3(k + 1)}{k - 1} is real (k≠1k \ne 1, since k=1k = 1 would need 3=−33 = -3).

    Why: A Möbius map with real coefficients sends real numbers to real numbers both ways.

  3. Write z=reiθz = re^{i\theta}: Im⁡(u)=4rsin⁡θ−2rsin⁡θ=sin⁡θ(4r−2r)=0\operatorname{Im}(u) = 4r\sin\theta - \dfrac{2}{r}\sin\theta = \sin\theta\left(4r - \dfrac{2}{r}\right) = 0.
  4. sin⁡θ≠0\sin\theta \ne 0 (non-zero imaginary part), so 4r=2r4r = \dfrac{2}{r}, i.e. r2=∣z∣2=12r^2 = |z|^2 = \dfrac{1}{2}.
AnswerAnswer: 0.50
Ask about this question
Q5

Mathematics, Question 5 (3 marks)

Complex numbers · +3
Let zˉ\bar{z} denote the complex conjugate of a complex number zz and let i=−1i = \sqrt{-1}. In the set of complex numbers, the number of distinct roots of the equation zˉ−z2=i(zˉ+z2)\bar{z} - z^2 = i(\bar{z} + z^2) is ______.

Tests: Simplify an equation in z and z̄, use moduli to fix |z|, then solve the resulting power equation.

Show solution
  1. Collect terms: (1−i)zˉ=(1+i)z2(1 - i)\bar{z} = (1 + i)z^2, so zˉ=1+i1−iz2=iz2\bar{z} = \dfrac{1 + i}{1 - i}z^2 = i z^2.
  2. z=0z = 0 is a root. For z≠0z \ne 0, take moduli: ∣z∣=∣z∣2|z| = |z|^2, so ∣z∣=1|z| = 1 and zˉ=1z\bar{z} = \dfrac{1}{z}.
  3. Then 1z=iz2\dfrac{1}{z} = iz^2, i.e. z3=1i=−iz^3 = \dfrac{1}{i} = -i, which has 3 distinct roots (z=i, e−iπ/6, e−5iπ/6z = i, \ e^{-i\pi/6}, \ e^{-5i\pi/6}).
  4. Total distinct roots =1+3=4= 1 + 3 = 4.
AnswerAnswer: 4
Ask about this question
Q6

Mathematics, Question 6 (3 marks)

Arithmetic progressions · +3
Let l1,l2,…,l100l_1, l_2, \ldots, l_{100} be consecutive terms of an arithmetic progression with common difference d1d_1, and let w1,w2,…,w100w_1, w_2, \ldots, w_{100} be consecutive terms of another arithmetic progression with common difference d2d_2, where d1d2=10d_1 d_2 = 10. For each i=1,2,…,100i = 1, 2, \ldots, 100, let RiR_i be a rectangle with length lil_i, width wiw_i and area AiA_i. If A51−A50=1000A_{51} - A_{50} = 1000, then the value of A100−A90A_{100} - A_{90} is ______.

Tests: Treat the area of a product of two APs as a quadratic in the index and use one difference to find the unknown.

Show solution
  1. Write li=a+id1l_i = a + i d_1 and wi=b+id2w_i = b + i d_2. Then Ai=liwi=ab+iK+i2d1d2=ab+iK+10i2A_i = l_i w_i = ab + iK + i^2 d_1 d_2 = ab + iK + 10i^2 with K=ad2+bd1K = a d_2 + b d_1.

    Why: A product of two APs is a quadratic in i.

  2. A51−A50=K+10(512−502)=K+10×101=K+1010=1000A_{51} - A_{50} = K + 10(51^2 - 50^2) = K + 10 \times 101 = K + 1010 = 1000, so K=−10K = -10.
  3. A100−A90=10K+10(1002−902)=−100+10×1900=18900A_{100} - A_{90} = 10K + 10(100^2 - 90^2) = -100 + 10 \times 1900 = 18900.
AnswerAnswer: 18900
Ask about this question
Q7

Mathematics, Question 7 (3 marks)

Permutations and combinations · +3
The number of 4-digit integers in the closed interval [2022,4482][2022, 4482] formed by using the digits 0,2,3,4,6,70, 2, 3, 4, 6, 7 is ______.

Tests: Count numbers in a range built from allowed digits by fixing leading digits case by case.

Show solution
  1. Digits may repeat; each of the last three places has 6 choices. Split by the first digit (only 2, 3, 4 are possible).
  2. First digit 2: 63=2166^3 = 216 numbers 2abc2abc, minus those below 2022: 2000,2002,2003,2004,2006,2007,20202000, 2002, 2003, 2004, 2006, 2007, 2020 (7 numbers). That leaves 209209.
  3. First digit 3: all 63=2166^3 = 216 numbers lie in the interval.
  4. First digit 4: second digit 0, 2 or 3 gives 3×36=1083 \times 36 = 108; second digit 4 gives 44cd≤4477<448244cd \le 4477 < 4482, all 3636 allowed; second digit 6 or 7 exceeds 4482. Total 144144.
  5. Total =209+216+144=569= 209 + 216 + 144 = 569.
AnswerAnswer: 569
Ask about this question
Q8

Mathematics, Question 8 (3 marks)

Circles and triangles · +3
Let ABCABC be the triangle with AB=1AB = 1, AC=3AC = 3 and ∠BAC=π2\angle BAC = \dfrac{\pi}{2}. If a circle of radius r>0r > 0 touches the sides ABAB, ACAC and also touches internally the circumcircle of the triangle ABCABC, then the value of rr is ______.

Tests: Use coordinates and the internal-tangency condition d = R − r to find a circle touching two sides and the circumcircle.

Show solution
  1. Take A=(0,0)A = (0, 0), B=(1,0)B = (1, 0), C=(0,3)C = (0, 3). A circle touching both axes (inside the angle AA) has centre (r,r)(r, r).
  2. The right angle at AA makes BCBC a diameter: circumcentre (12,32)\left(\dfrac{1}{2}, \dfrac{3}{2}\right), radius R=102R = \dfrac{\sqrt{10}}{2}.
  3. Internal tangency: distance between centres =R−r= R - r: (r−12)2+(r−32)2=(102−r)2\left(r - \dfrac{1}{2}\right)^2 + \left(r - \dfrac{3}{2}\right)^2 = \left(\dfrac{\sqrt{10}}{2} - r\right)^2.
  4. Expand: 2r2−4r+52=r2−10 r+522r^2 - 4r + \dfrac{5}{2} = r^2 - \sqrt{10}\,r + \dfrac{5}{2}, so r2−(4−10)r=0r^2 - (4 - \sqrt{10})r = 0 and r=4−10r = 4 - \sqrt{10} (as r>0r > 0).
  5. r=4−10=0.8377…r = 4 - \sqrt{10} = 0.8377\ldots; it touches ABAB at (0.84,0)(0.84, 0), inside the side of length 1. Rounding gives 0.840.84, truncation 0.830.83; the paper allows either, so both are accepted.
AnswerAnswer: 0.84 (exactly 4−104 - \sqrt{10}; 0.83 by truncation is also accepted)
Ask about this question

Mathematics, Section 2: 6 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q9

Mathematics, Question 9 (4 marks)

Definite integration · +4 / −2
Consider the equation ∫1e(log⁡ex)1/2x(a−(log⁡ex)3/2)2 dx=1\displaystyle\int_1^e \dfrac{(\log_e x)^{1/2}}{x\left(a - (\log_e x)^{3/2}\right)^2}\,dx = 1, a∈(−∞,0)∪(1,∞)a \in (-\infty, 0) \cup (1, \infty). Which of the following statements is/are TRUE?
  1. (A)No aa satisfies the above equation
  2. (B)An integer aa satisfies the above equation
  3. (C)An irrational number aa satisfies the above equation
  4. (D)More than one aa satisfy the above equation

Tests: Substitute t = (log x)^{3/2} to turn the integral into an elementary one and solve for a.

Show solution
  1. Put t=(log⁡ex)3/2t = (\log_e x)^{3/2}, dt=32(log⁡ex)1/2dxxdt = \dfrac{3}{2}(\log_e x)^{1/2}\dfrac{dx}{x}; x:1→ex: 1 \rightarrow e gives t:0→1t: 0 \rightarrow 1.
  2. The integral becomes 23∫01dt(a−t)2=23[1a−t]01=23(1a−1−1a)=23a(a−1)\dfrac{2}{3}\displaystyle\int_0^1 \dfrac{dt}{(a - t)^2} = \dfrac{2}{3}\left[\dfrac{1}{a - t}\right]_0^1 = \dfrac{2}{3}\left(\dfrac{1}{a - 1} - \dfrac{1}{a}\right) = \dfrac{2}{3a(a - 1)}.

    Why: For a < 0 or a > 1, a − t never vanishes on [0, 1], so the integral is proper.

  3. Set it equal to 1: 3a2−3a−2=03a^2 - 3a - 2 = 0, so a=3±336a = \dfrac{3 \pm \sqrt{33}}{6}, i.e. a≈1.457a \approx 1.457 and a≈−0.457a \approx -0.457.
  4. Both lie in the allowed set (1.457>11.457 > 1, −0.457<0-0.457 < 0) and both are irrational. (A) false, (B) false (no integer), (C) true, (D) true (two values).
AnswerAnswer: (C), (D)
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Sequences and series · +4 / −2
Let a1,a2,a3,…a_1, a_2, a_3, \ldots be an arithmetic progression with a1=7a_1 = 7 and common difference 8. Let T1,T2,T3,…T_1, T_2, T_3, \ldots be such that T1=3T_1 = 3 and Tn+1−Tn=anT_{n+1} - T_n = a_n for n≥1n \ge 1. Then, which of the following is/are TRUE?
  1. (A)T20=1604T_{20} = 1604
  2. (B)∑k=120Tk=10510\sum_{k=1}^{20} T_k = 10510
  3. (C)T30=3454T_{30} = 3454
  4. (D)∑k=130Tk=35610\sum_{k=1}^{30} T_k = 35610

Tests: Recover a sequence from its differences (an AP) and sum it using standard power sums.

Show solution
  1. an=7+8(n−1)=8n−1a_n = 7 + 8(n - 1) = 8n - 1. Then Tn=T1+∑k=1n−1ak=3+4n(n−1)−(n−1)=4n2−5n+4T_n = T_1 + \sum_{k=1}^{n-1} a_k = 3 + 4n(n - 1) - (n - 1) = 4n^2 - 5n + 4.

    Why: Check: T₁ = 4 − 5 + 4 = 3.

  2. (A) T20=1600−100+4=1504≠1604T_{20} = 1600 - 100 + 4 = 1504 \ne 1604: false. (C) T30=3600−150+4=3454T_{30} = 3600 - 150 + 4 = 3454: true.
  3. ∑k=1nTk=4∑k2−5∑k+4n\sum_{k=1}^{n} T_k = 4\sum k^2 - 5\sum k + 4n.
  4. (B) n=20n = 20: 4(2870)−5(210)+80=11480−1050+80=105104(2870) - 5(210) + 80 = 11480 - 1050 + 80 = 10510: true.
  5. (D) n=30n = 30: 4(9455)−5(465)+120=37820−2325+120=35615≠356104(9455) - 5(465) + 120 = 37820 - 2325 + 120 = 35615 \ne 35610: false.
AnswerAnswer: (B), (C)
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

3D geometry (planes and lines) · +4 / −2
Let P1P_1 and P2P_2 be two planes given by P1:10x+15y+12z−60=0P_1: 10x + 15y + 12z - 60 = 0, P2:−2x+5y+4z−20=0P_2: -2x + 5y + 4z - 20 = 0. Which of the following straight lines can be an edge of some tetrahedron whose two faces lie on P1P_1 and P2P_2?
  1. (A)x−10=y−10=z−15\dfrac{x - 1}{0} = \dfrac{y - 1}{0} = \dfrac{z - 1}{5}
  2. (B)x−6−5=y2=z3\dfrac{x - 6}{-5} = \dfrac{y}{2} = \dfrac{z}{3}
  3. (C)x−2=y−45=z4\dfrac{x}{-2} = \dfrac{y - 4}{5} = \dfrac{z}{4}
  4. (D)x1=y−4−2=z3\dfrac{x}{1} = \dfrac{y - 4}{-2} = \dfrac{z}{3}

Tests: Decide which lines can be edges of a tetrahedron with two faces on given planes by checking where each line meets the planes.

Show solution
  1. Such a tetrahedron ABCDABCD has edge ABAB on L=P1∩P2L = P_1 \cap P_2, a vertex CC on P1P_1 and DD on P2P_2 (both off LL). Its edges are ABAB (on LL), AC,BCAC, BC (in P1P_1, through a point of LL), AD,BDAD, BD (in P2P_2, through a point of LL) and CDCD (meeting P1P_1 and P2P_2 at two distinct points off LL). LL has direction n⃗1×n⃗2=(0,−64,80)∥(0,−4,5)\vec{n}_1 \times \vec{n}_2 = (0, -64, 80) \parallel (0, -4, 5).
  2. (A) Direction (0,0,5)(0, 0, 5): n⃗1⋅d⃗=60≠0\vec{n}_1 \cdot \vec{d} = 60 \ne 0, n⃗2⋅d⃗=20≠0\vec{n}_2 \cdot \vec{d} = 20 \ne 0. It meets P1P_1 at (1,1,3512)(1, 1, \tfrac{35}{12}) and P2P_2 at (1,1,174)(1, 1, \tfrac{17}{4}), two distinct points, neither on the other plane. So it can be edge CDCD: true.
  3. (B) Direction (−5,2,3)(-5, 2, 3): n⃗1⋅d⃗=16\vec{n}_1 \cdot \vec{d} = 16, n⃗2⋅d⃗=32\vec{n}_2 \cdot \vec{d} = 32. It meets P1P_1 at (6,0,0)(6, 0, 0) and P2P_2 at (1,2,3)(1, 2, 3) (parameter 1); (6,0,0)(6, 0, 0) is not on P2P_2 and (1,2,3)(1, 2, 3) is not on P1P_1. So it can be edge CDCD: true.
  4. (C) Direction (−2,5,4)=n⃗2(-2, 5, 4) = \vec{n}_2, through (0,4,0)(0, 4, 0), which lies on both planes (on LL). It is not in either plane (n⃗1⋅d⃗=103\vec{n}_1 \cdot \vec{d} = 103, and it is normal to P2P_2), so it meets both planes only at that one point of LL. It cannot be ABAB, an edge in a face, or CDCD: false.
  5. (D) Direction (1,−2,3)(1, -2, 3): n⃗2⋅d⃗=−2−10+12=0\vec{n}_2 \cdot \vec{d} = -2 - 10 + 12 = 0 and (0,4,0)(0, 4, 0) lies on P2P_2, so the line lies in P2P_2, through a point of LL, and is not parallel to LL. It can be edge ADAD: true.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

3D geometry (reflection in a plane) · +4 / −2
Let SS be the reflection of a point QQ with respect to the plane given by r⃗=−(t+p)i^+tj^+(1+p)k^\vec{r} = -(t + p)\hat{i} + t\hat{j} + (1 + p)\hat{k}, where t,pt, p are real parameters and i^,j^,k^\hat{i}, \hat{j}, \hat{k} are the unit vectors along the three positive coordinate axes. If the position vectors of QQ and SS are 10i^+15j^+20k^10\hat{i} + 15\hat{j} + 20\hat{k} and αi^+βj^+γk^\alpha\hat{i} + \beta\hat{j} + \gamma\hat{k} respectively, then which of the following is/are TRUE?
  1. (A)3(α+β)=−1013(\alpha + \beta) = -101
  2. (B)3(β+γ)=−713(\beta + \gamma) = -71
  3. (C)3(γ+α)=−863(\gamma + \alpha) = -86
  4. (D)3(α+β+γ)=−1213(\alpha + \beta + \gamma) = -121

Tests: Convert a parametric plane to Cartesian form and reflect a point in it.

Show solution
  1. On the plane x=−(t+p)x = -(t + p), y=ty = t, z=1+pz = 1 + p, so x+y=−p=1−zx + y = -p = 1 - z: the plane is x+y+z=1x + y + z = 1.

    Why: Eliminate the two parameters to get the Cartesian equation.

  2. Reflection of Q(10,15,20)Q(10, 15, 20): S=Q−2(10+15+20−1)3(1,1,1)=Q−883(1,1,1)S = Q - \dfrac{2(10 + 15 + 20 - 1)}{3}(1, 1, 1) = Q - \dfrac{88}{3}(1, 1, 1).
  3. S=(−583,−433,−283)S = \left(-\dfrac{58}{3}, -\dfrac{43}{3}, -\dfrac{28}{3}\right), i.e. 3α=−583\alpha = -58, 3β=−433\beta = -43, 3γ=−283\gamma = -28.
  4. (A) −58−43=−101-58 - 43 = -101: true. (B) −43−28=−71-43 - 28 = -71: true. (C) −28−58=−86-28 - 58 = -86: true. (D) −58−43−28=−129≠−121-58 - 43 - 28 = -129 \ne -121: false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Parabola · +4 / −2
Consider the parabola y2=4xy^2 = 4x. Let SS be the focus of the parabola. A pair of tangents drawn to the parabola from the point P=(−2,1)P = (-2, 1) meet the parabola at P1P_1 and P2P_2. Let Q1Q_1 and Q2Q_2 be points on the lines SP1SP_1 and SP2SP_2 respectively such that PQ1PQ_1 is perpendicular to SP1SP_1 and PQ2PQ_2 is perpendicular to SP2SP_2. Then, which of the following is/are TRUE?
  1. (A)SQ1=2SQ_1 = 2
  2. (B)Q1Q2=3105Q_1Q_2 = \dfrac{3\sqrt{10}}{5}
  3. (C)PQ1=3PQ_1 = 3
  4. (D)SQ2=1SQ_2 = 1

Tests: Find the points of contact of tangents from an external point and the feet of perpendiculars onto the focal lines.

Show solution
  1. S=(1,0)S = (1, 0). Tangent y=mx+1my = mx + \dfrac{1}{m} through (−2,1)(-2, 1): 1=−2m+1m1 = -2m + \dfrac{1}{m}, so 2m2+m−1=02m^2 + m - 1 = 0, m=12m = \dfrac{1}{2} or −1-1. Points of contact (1m2,2m)\left(\dfrac{1}{m^2}, \dfrac{2}{m}\right): (4,4)(4, 4) and (1,−2)(1, -2).
  2. SP⃗=(−3,1)\vec{SP} = (-3, 1), ∣SP∣2=10|SP|^2 = 10. Line S→(4,4)S \rightarrow (4, 4): unit vector (35,45)\left(\dfrac{3}{5}, \dfrac{4}{5}\right); projection of SP⃗\vec{SP} on it =−9+45=−1= \dfrac{-9 + 4}{5} = -1, so the foot is at distance 1 from SS: Q=(25,−45)Q = \left(\dfrac{2}{5}, -\dfrac{4}{5}\right), and PQ=10−1=3PQ = \sqrt{10 - 1} = 3.
  3. Line S→(1,−2)S \rightarrow (1, -2) is x=1x = 1; the foot from PP is (1,1)(1, 1), at distance 1 from SS, and PQ=3PQ = 3.
  4. Whichever contact point is called P1P_1: SQ1=SQ2=1SQ_1 = SQ_2 = 1 and PQ1=PQ2=3PQ_1 = PQ_2 = 3. So (A) false, (C) true, (D) true.

    Why: Known fact: SP bisects the angle P₁SP₂, so P is equidistant from the two lines.

  5. (B) Q1Q2=(1−25)2+(1+45)2=9+815=3105Q_1Q_2 = \sqrt{\left(1 - \tfrac{2}{5}\right)^2 + \left(1 + \tfrac{4}{5}\right)^2} = \dfrac{\sqrt{9 + 81}}{5} = \dfrac{3\sqrt{10}}{5}: true.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q14

Mathematics, Question 14 (4 marks)

Determinants and quadratic polynomials · +4 / −2
Let ∣M∣|M| denote the determinant of a square matrix MM. Let g:[0,π2]→Rg: \left[0, \dfrac{\pi}{2}\right] \rightarrow \mathbb{R} be the function defined by g(θ)=f(θ)−1+f(π2−θ)−1g(\theta) = \sqrt{f(\theta) - 1} + \sqrt{f\left(\dfrac{\pi}{2} - \theta\right) - 1}, where f(θ)=12∣1sin⁡θ1−sin⁡θ1sin⁡θ−1−sin⁡θ1∣+∣sin⁡πcos⁡(θ+π4)tan⁡(θ−π4)sin⁡(θ−π4)−cos⁡π2log⁡e(4π)cot⁡(θ+π4)log⁡e(π4)tan⁡π∣f(\theta) = \dfrac{1}{2}\begin{vmatrix} 1 & \sin\theta & 1 \\ -\sin\theta & 1 & \sin\theta \\ -1 & -\sin\theta & 1 \end{vmatrix} + \begin{vmatrix} \sin\pi & \cos\left(\theta + \frac{\pi}{4}\right) & \tan\left(\theta - \frac{\pi}{4}\right) \\ \sin\left(\theta - \frac{\pi}{4}\right) & -\cos\frac{\pi}{2} & \log_e\left(\frac{4}{\pi}\right) \\ \cot\left(\theta + \frac{\pi}{4}\right) & \log_e\left(\frac{\pi}{4}\right) & \tan\pi \end{vmatrix}. Let p(x)p(x) be a quadratic polynomial whose roots are the maximum and minimum values of the function g(θ)g(\theta), and p(2)=2−2p(2) = 2 - \sqrt{2}. Then, which of the following is/are TRUE?
  1. (A)p(3+24)<0p\left(\dfrac{3 + \sqrt{2}}{4}\right) < 0
  2. (B)p(1+324)>0p\left(\dfrac{1 + 3\sqrt{2}}{4}\right) > 0
  3. (C)p(52−14)>0p\left(\dfrac{5\sqrt{2} - 1}{4}\right) > 0
  4. (D)p(5−24)<0p\left(\dfrac{5 - \sqrt{2}}{4}\right) < 0

Tests: Spot a skew-symmetric determinant, simplify g(θ) to sin θ + cos θ, and test signs of a quadratic between its roots.

Show solution
  1. First determinant (expand along row 1): 1(1+sin⁡2θ)−sin⁡θ(−sin⁡θ+sin⁡θ)+1(sin⁡2θ+1)=2+2sin⁡2θ1(1 + \sin^2\theta) - \sin\theta(-\sin\theta + \sin\theta) + 1(\sin^2\theta + 1) = 2 + 2\sin^2\theta; half of it is 1+sin⁡2θ1 + \sin^2\theta.
  2. Second determinant: the diagonal is sin⁡π=−cos⁡π2=tan⁡π=0\sin\pi = -\cos\frac{\pi}{2} = \tan\pi = 0, and sin⁡(θ−π4)=−cos⁡(θ+π4)\sin\left(\theta - \frac{\pi}{4}\right) = -\cos\left(\theta + \frac{\pi}{4}\right), cot⁡(θ+π4)=−tan⁡(θ−π4)\cot\left(\theta + \frac{\pi}{4}\right) = -\tan\left(\theta - \frac{\pi}{4}\right), log⁡eπ4=−log⁡e4π\log_e\frac{\pi}{4} = -\log_e\frac{4}{\pi}. It is skew-symmetric of order 3, so it is 0.

    Why: A skew-symmetric matrix of odd order has determinant 0.

  3. So f(θ)=1+sin⁡2θf(\theta) = 1 + \sin^2\theta and g(θ)=∣sin⁡θ∣+∣cos⁡θ∣=sin⁡θ+cos⁡θ=2sin⁡(θ+π4)g(\theta) = |\sin\theta| + |\cos\theta| = \sin\theta + \cos\theta = \sqrt{2}\sin\left(\theta + \frac{\pi}{4}\right) on [0,π/2][0, \pi/2]: minimum 1 (at the ends), maximum 2\sqrt{2} (at π/4\pi/4).
  4. p(x)=k(x−1)(x−2)p(x) = k(x - 1)(x - \sqrt{2}) and p(2)=k(2−2)=2−2p(2) = k(2 - \sqrt{2}) = 2 - \sqrt{2} gives k=1k = 1. So p(x)<0p(x) < 0 exactly for 1<x<2≈1.4141 < x < \sqrt{2} \approx 1.414.
  5. (A) 3+24≈1.104∈(1,2)\dfrac{3 + \sqrt{2}}{4} \approx 1.104 \in (1, \sqrt{2}): p<0p < 0, true. (B) 1+324≈1.311∈(1,2)\dfrac{1 + 3\sqrt{2}}{4} \approx 1.311 \in (1, \sqrt{2}): p<0p < 0, so ">0> 0" is false.
  6. (C) 52−14≈1.518>2\dfrac{5\sqrt{2} - 1}{4} \approx 1.518 > \sqrt{2}: p>0p > 0, true. (D) 5−24≈0.896<1\dfrac{5 - \sqrt{2}}{4} \approx 0.896 < 1: p>0p > 0, so "<0< 0" is false.
AnswerAnswer: (A), (C)
Ask about this question

Mathematics, Section 3: 4 matching list sets (List-I with four entries, List-II with five), only one option correct: +3 if only the correct combination is chosen, 0 if unanswered, −1 in all other cases

Q15

Mathematics, Question 15 (3 marks)

Trigonometric equations · +3 / −1
Consider the following lists. The correct option is:
List-IList-II
(I) {x∈[−2π3,2π3]:cos⁡x+sin⁡x=1}\left\{x \in \left[-\dfrac{2\pi}{3}, \dfrac{2\pi}{3}\right] : \cos x + \sin x = 1\right\}(P) has two elements
(II) {x∈[−5π18,5π18]:3tan⁡3x=1}\left\{x \in \left[-\dfrac{5\pi}{18}, \dfrac{5\pi}{18}\right] : \sqrt{3}\tan 3x = 1\right\}(Q) has three elements
(III) {x∈[−6π5,6π5]:2cos⁡(2x)=3}\left\{x \in \left[-\dfrac{6\pi}{5}, \dfrac{6\pi}{5}\right] : 2\cos(2x) = \sqrt{3}\right\}(R) has four elements
(IV) {x∈[−7π4,7π4]:sin⁡x−cos⁡x=1}\left\{x \in \left[-\dfrac{7\pi}{4}, \dfrac{7\pi}{4}\right] : \sin x - \cos x = 1\right\}(S) has five elements
(T) has six elements
  1. (A)(I) →\rightarrow (P); (II) →\rightarrow (S); (III) →\rightarrow (P); (IV) →\rightarrow (S)
  2. (B)(I) →\rightarrow (P); (II) →\rightarrow (P); (III) →\rightarrow (T); (IV) →\rightarrow (R)
  3. (C)(I) →\rightarrow (Q); (II) →\rightarrow (P); (III) →\rightarrow (T); (IV) →\rightarrow (S)
  4. (D)(I) →\rightarrow (Q); (II) →\rightarrow (S); (III) →\rightarrow (P); (IV) →\rightarrow (R)

Tests: Write the general solution of each trigonometric equation and count the solutions in a closed interval.

Show solution
  1. (I) 2sin⁡(x+π4)=1\sqrt{2}\sin\left(x + \frac{\pi}{4}\right) = 1: x=2nπx = 2n\pi or x=π2+2nπx = \frac{\pi}{2} + 2n\pi. In [−2π3,2π3]\left[-\frac{2\pi}{3}, \frac{2\pi}{3}\right]: 0,π20, \frac{\pi}{2}. Two elements →\rightarrow (P).
  2. (II) tan⁡3x=13\tan 3x = \frac{1}{\sqrt{3}}: x=π18+nπ3x = \frac{\pi}{18} + \frac{n\pi}{3}. In [−5π18,5π18]\left[-\frac{5\pi}{18}, \frac{5\pi}{18}\right]: π18\frac{\pi}{18} and −5π18-\frac{5\pi}{18} (the endpoint is included); 7π18\frac{7\pi}{18} is outside. Two elements →\rightarrow (P).
  3. (III) cos⁡2x=32\cos 2x = \frac{\sqrt{3}}{2}: x=±π12+nπx = \pm\frac{\pi}{12} + n\pi. In [−6π5,6π5]\left[-\frac{6\pi}{5}, \frac{6\pi}{5}\right] (6π5=14.4π12\frac{6\pi}{5} = \frac{14.4\pi}{12}): ±π12,±11π12,±13π12\pm\frac{\pi}{12}, \pm\frac{11\pi}{12}, \pm\frac{13\pi}{12}. Six elements →\rightarrow (T).
  4. (IV) 2sin⁡(x−π4)=1\sqrt{2}\sin\left(x - \frac{\pi}{4}\right) = 1: x=π2+2nπx = \frac{\pi}{2} + 2n\pi or x=π+2nπx = \pi + 2n\pi. In [−7π4,7π4]\left[-\frac{7\pi}{4}, \frac{7\pi}{4}\right]: π2,−3π2,π,−π\frac{\pi}{2}, -\frac{3\pi}{2}, \pi, -\pi. Four elements →\rightarrow (R).
  5. (I) P, (II) P, (III) T, (IV) R is option (B).
AnswerAnswer: (B) (I) →\rightarrow (P); (II) →\rightarrow (P); (III) →\rightarrow (T); (IV) →\rightarrow (R)
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Probability · +3 / −1
Two players, P1P_1 and P2P_2, play a game against each other. In every round of the game, each player rolls a fair die once, where the six faces of the die have six distinct numbers. Let xx and yy denote the readings on the die rolled by P1P_1 and P2P_2, respectively. If x>yx > y, then P1P_1 scores 5 points and P2P_2 scores 0 point. If x=yx = y, then each player scores 2 points. If x<yx < y, then P1P_1 scores 0 point and P2P_2 scores 5 points. Let XiX_i and YiY_i be the total scores of P1P_1 and P2P_2, respectively, after playing the ithi^{th} round. The correct option is:
List-IList-II
(I) Probability of (X2≥Y2)(X_2 \ge Y_2) is(P) 38\dfrac{3}{8}
(II) Probability of (X2>Y2)(X_2 > Y_2) is(Q) 1116\dfrac{11}{16}
(III) Probability of (X3=Y3)(X_3 = Y_3) is(R) 516\dfrac{5}{16}
(IV) Probability of (X3>Y3)(X_3 > Y_3) is(S) 355864\dfrac{355}{864}
(T) 77432\dfrac{77}{432}
  1. (A)(I) →\rightarrow (Q); (II) →\rightarrow (R); (III) →\rightarrow (T); (IV) →\rightarrow (S)
  2. (B)(I) →\rightarrow (Q); (II) →\rightarrow (R); (III) →\rightarrow (T); (IV) →\rightarrow (T)
  3. (C)(I) →\rightarrow (P); (II) →\rightarrow (R); (III) →\rightarrow (Q); (IV) →\rightarrow (S)
  4. (D)(I) →\rightarrow (P); (II) →\rightarrow (R); (III) →\rightarrow (Q); (IV) →\rightarrow (T)

Tests: Reduce a scoring game to counting wins, draws and losses per round, and use the win/loss symmetry.

Show solution
  1. One round: win WW (x>yx > y) with probability 1536=512\frac{15}{36} = \frac{5}{12}, draw DD with 16\frac{1}{6}, loss LL with 512\frac{5}{12}. Each round changes X−YX - Y by +5+5, 00 or −5-5, so Xi>YiX_i > Y_i exactly when P1P_1 has more wins than losses.
  2. P(X2=Y2)=P(DD)+P(one W, one L)=136+2(512)2=4+50144=38P(X_2 = Y_2) = P(DD) + P(\text{one } W, \text{ one } L) = \frac{1}{36} + 2\left(\frac{5}{12}\right)^2 = \frac{4 + 50}{144} = \frac{3}{8}.
  3. By symmetry (WW and LL equally likely), P(X2>Y2)=12(1−38)=516P(X_2 > Y_2) = \frac{1}{2}\left(1 - \frac{3}{8}\right) = \frac{5}{16} →\rightarrow (II) (R); and P(X2≥Y2)=38+516=1116P(X_2 \ge Y_2) = \frac{3}{8} + \frac{5}{16} = \frac{11}{16} →\rightarrow (I) (Q).
  4. P(X3=Y3)=P(DDD)+P(one each of W,L,D)=1216+3!⋅512⋅512⋅16=2432+75432=77432P(X_3 = Y_3) = P(DDD) + P(\text{one each of } W, L, D) = \frac{1}{216} + 3! \cdot \frac{5}{12} \cdot \frac{5}{12} \cdot \frac{1}{6} = \frac{2}{432} + \frac{75}{432} = \frac{77}{432} →\rightarrow (III) (T).
  5. P(X3>Y3)=12(1−77432)=355864P(X_3 > Y_3) = \frac{1}{2}\left(1 - \frac{77}{432}\right) = \frac{355}{864} →\rightarrow (IV) (S). This is option (A).
AnswerAnswer: (A) (I) →\rightarrow (Q); (II) →\rightarrow (R); (III) →\rightarrow (T); (IV) →\rightarrow (S)
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Systems of linear equations and harmonic progressions · +3 / −1
Let p,q,rp, q, r be nonzero real numbers that are, respectively, the 10th10^{th}, 100th100^{th} and 1000th1000^{th} terms of a harmonic progression. Consider the system of linear equations x+y+z=1x + y + z = 1, 10x+100y+1000z=010x + 100y + 1000z = 0, qr x+pr y+pq z=0qr\,x + pr\,y + pq\,z = 0. The correct option is:
List-IList-II
(I) If qr=10\dfrac{q}{r} = 10, then the system of linear equations has(P) x=0x = 0, y=109y = \dfrac{10}{9}, z=−19z = -\dfrac{1}{9} as a solution
(II) If pr≠100\dfrac{p}{r} \ne 100, then the system of linear equations has(Q) x=109x = \dfrac{10}{9}, y=−19y = -\dfrac{1}{9}, z=0z = 0 as a solution
(III) If pq≠10\dfrac{p}{q} \ne 10, then the system of linear equations has(R) infinitely many solutions
(IV) If pq=10\dfrac{p}{q} = 10, then the system of linear equations has(S) no solution
(T) at least one solution
  1. (A)(I) →\rightarrow (T); (II) →\rightarrow (R); (III) →\rightarrow (S); (IV) →\rightarrow (T)
  2. (B)(I) →\rightarrow (Q); (II) →\rightarrow (S); (III) →\rightarrow (S); (IV) →\rightarrow (R)
  3. (C)(I) →\rightarrow (Q); (II) →\rightarrow (R); (III) →\rightarrow (P); (IV) →\rightarrow (R)
  4. (D)(I) →\rightarrow (T); (II) →\rightarrow (S); (III) →\rightarrow (P); (IV) →\rightarrow (T)

Tests: Rewrite the HP condition so the third equation becomes a combination of the first two, then decide consistency.

Show solution
  1. 1p,1q,1r\frac{1}{p}, \frac{1}{q}, \frac{1}{r} are terms of an AP: 1p=a+9d\frac{1}{p} = a + 9d, 1q=a+99d\frac{1}{q} = a + 99d, 1r=a+999d\frac{1}{r} = a + 999d. Dividing the third equation by pqr≠0pqr \ne 0: (a+9d)x+(a+99d)y+(a+999d)z=0(a + 9d)x + (a + 99d)y + (a + 999d)z = 0.
  2. Its coefficient row is a(1,1,1)+d(9,99,999)=(a−d)(1,1,1)+d(10,100,1000)a(1, 1, 1) + d(9, 99, 999) = (a - d)(1, 1, 1) + d(10, 100, 1000), a combination of the first two rows. On any solution of the first two equations its left side equals (a−d)⋅1+d⋅0=a−d(a - d) \cdot 1 + d \cdot 0 = a - d.

    Why: So the rank is always 2; only consistency is in question.

  3. Hence: a=da = d gives infinitely many solutions (rank 2, three unknowns); a≠da \ne d gives no solution. The solution line of the first two equations (x+y+z=1x + y + z = 1, x+10y+100z=0x + 10y + 100z = 0) contains both (0,109,−19)(0, \frac{10}{9}, -\frac{1}{9}) and (109,−19,0)(\frac{10}{9}, -\frac{1}{9}, 0), so when a=da = d, (P), (Q), (R) and (T) are all true.
  4. Each condition in terms of a,da, d: qr=10  ⟺  a+999d=10a+990d  ⟺  a=d\frac{q}{r} = 10 \iff a + 999d = 10a + 990d \iff a = d; pr=100  ⟺  a+999d=100a+900d  ⟺  a=d\frac{p}{r} = 100 \iff a + 999d = 100a + 900d \iff a = d; pq=10  ⟺  a+99d=10a+90d  ⟺  a=d\frac{p}{q} = 10 \iff a + 99d = 10a + 90d \iff a = d.
  5. (I) a=da = d: (P), (Q), (R), (T) all hold. (II) a≠da \ne d: (S). (III) a≠da \ne d: (S). (IV) a=da = d: (P), (Q), (R), (T).
  6. Check each option: (A) has (II) →\rightarrow (R), false; (C) has (II) →\rightarrow (R), false; (D) has (III) →\rightarrow (P), false. In (B), (I) →\rightarrow (Q), (II) →\rightarrow (S), (III) →\rightarrow (S), (IV) →\rightarrow (R) are all true, so (B) is the only correct combination.
AnswerAnswer: (B) (I) →\rightarrow (Q); (II) →\rightarrow (S); (III) →\rightarrow (S); (IV) →\rightarrow (R)
Ask about this question
Q18

Mathematics, Question 18 (3 marks)

Ellipse · +3 / −1
Consider the ellipse x24+y23=1\dfrac{x^2}{4} + \dfrac{y^2}{3} = 1. Let H(α,0)H(\alpha, 0), 0<α<20 < \alpha < 2, be a point. A straight line drawn through HH parallel to the yy-axis crosses the ellipse and its auxiliary circle at points EE and FF respectively, in the first quadrant. The tangent to the ellipse at the point EE intersects the positive xx-axis at a point GG. Suppose the straight line joining FF and the origin makes an angle ϕ\phi with the positive xx-axis. The correct option is:
List-IList-II
(I) If ϕ=π4\phi = \dfrac{\pi}{4}, then the area of the triangle FGHFGH is(P) (3−1)48\dfrac{(\sqrt{3} - 1)^4}{8}
(II) If ϕ=π3\phi = \dfrac{\pi}{3}, then the area of the triangle FGHFGH is(Q) 1
(III) If ϕ=π6\phi = \dfrac{\pi}{6}, then the area of the triangle FGHFGH is(R) 34\dfrac{3}{4}
(IV) If ϕ=π12\phi = \dfrac{\pi}{12}, then the area of the triangle FGHFGH is(S) 123\dfrac{1}{2\sqrt{3}}
(T) 332\dfrac{3\sqrt{3}}{2}
  1. (A)(I) →\rightarrow (R); (II) →\rightarrow (S); (III) →\rightarrow (Q); (IV) →\rightarrow (P)
  2. (B)(I) →\rightarrow (R); (II) →\rightarrow (T); (III) →\rightarrow (S); (IV) →\rightarrow (P)
  3. (C)(I) →\rightarrow (Q); (II) →\rightarrow (T); (III) →\rightarrow (S); (IV) →\rightarrow (P)
  4. (D)(I) →\rightarrow (Q); (II) →\rightarrow (S); (III) →\rightarrow (Q); (IV) →\rightarrow (P)

Tests: Use the eccentric angle to link a point on the ellipse to its auxiliary-circle point, then find the tangent's x-intercept.

Show solution
  1. The auxiliary circle is x2+y2=4x^2 + y^2 = 4, so F=(2cos⁡ϕ,2sin⁡ϕ)F = (2\cos\phi, 2\sin\phi), H=(2cos⁡ϕ,0)H = (2\cos\phi, 0) and E=(2cos⁡ϕ,3sin⁡ϕ)E = (2\cos\phi, \sqrt{3}\sin\phi) (eccentric angle ϕ\phi).
  2. Tangent at EE: xcos⁡ϕ2+ysin⁡ϕ3=1\dfrac{x\cos\phi}{2} + \dfrac{y\sin\phi}{\sqrt{3}} = 1; with y=0y = 0, G=(2cos⁡ϕ,0)G = \left(\dfrac{2}{\cos\phi}, 0\right).
  3. Triangle FGHFGH is right-angled at HH: area =12⋅HG⋅HF=12(2cos⁡ϕ−2cos⁡ϕ)(2sin⁡ϕ)=2sin⁡3ϕcos⁡ϕ=2sin⁡2ϕtan⁡ϕ= \frac{1}{2} \cdot HG \cdot HF = \frac{1}{2}\left(\frac{2}{\cos\phi} - 2\cos\phi\right)(2\sin\phi) = \dfrac{2\sin^3\phi}{\cos\phi} = 2\sin^2\phi\tan\phi.
  4. (I) ϕ=π4\phi = \frac{\pi}{4}: 2⋅12⋅1=12 \cdot \frac{1}{2} \cdot 1 = 1 →\rightarrow (Q). (II) ϕ=π3\phi = \frac{\pi}{3}: 2⋅34⋅3=3322 \cdot \frac{3}{4} \cdot \sqrt{3} = \frac{3\sqrt{3}}{2} →\rightarrow (T). (III) ϕ=π6\phi = \frac{\pi}{6}: 2⋅14⋅13=1232 \cdot \frac{1}{4} \cdot \frac{1}{\sqrt{3}} = \frac{1}{2\sqrt{3}} →\rightarrow (S).
  5. (IV) ϕ=π12\phi = \frac{\pi}{12}: sin⁡2π12=2−34\sin^2\frac{\pi}{12} = \frac{2 - \sqrt{3}}{4}, tan⁡π12=2−3\tan\frac{\pi}{12} = 2 - \sqrt{3}, area =(2−3)22= \frac{(2 - \sqrt{3})^2}{2}. Since (3−1)2=4−23=2(2−3)(\sqrt{3} - 1)^2 = 4 - 2\sqrt{3} = 2(2 - \sqrt{3}), (3−1)48=4(2−3)28=(2−3)22\frac{(\sqrt{3} - 1)^4}{8} = \frac{4(2 - \sqrt{3})^2}{8} = \frac{(2 - \sqrt{3})^2}{2} →\rightarrow (P). This is option (C).
AnswerAnswer: (C) (I) →\rightarrow (Q); (II) →\rightarrow (T); (III) →\rightarrow (S); (IV) →\rightarrow (P)
Ask about this question

Physics, Section 1: 8 questions, the answer is a numerical value (truncate or round off to two decimal places): +3 only if the correct value is entered, 0 in all other cases (no negative marks)

Q1

Physics, Question 1 (3 marks)

Gravitation (escape velocity) · +3
Two spherical stars AA and BB have densities ρA\rho_A and ρB\rho_B, respectively. AA and BB have the same radius, and their masses MAM_A and MBM_B are related by MB=2MAM_B = 2M_A. Due to an interaction process, star AA loses some of its mass, so that its radius is halved, while its spherical shape is retained, and its density remains ρA\rho_A. The entire mass lost by AA is deposited as a thick spherical shell on BB with the density of the shell being ρA\rho_A. If vAv_A and vBv_B are the escape velocities from AA and BB after the interaction process, the ratio vBvA=10n151/3\dfrac{v_B}{v_A} = \sqrt{\dfrac{10n}{15^{1/3}}}. The value of nn is ____ .

Tests: Track how mass and radius change for both stars, then compare escape speeds.

Show solution
  1. Escape velocity from the surface: v=2GMrv = \sqrt{\dfrac{2GM}{r}}, with MM the total mass and rr the outer radius.
  2. Star AA keeps density ρA\rho_A but its radius becomes R/2R/2, so its mass becomes MA/8M_A/8. It loses 78MA\dfrac{7}{8}M_A, which has volume 78⋅43πR3\dfrac{7}{8}\cdot\dfrac{4}{3}\pi R^3 at density ρA\rho_A.
  3. The shell on BB: 43π(R′3−R3)=78⋅43πR3\dfrac{4}{3}\pi(R'^3 - R^3) = \dfrac{7}{8}\cdot\dfrac{4}{3}\pi R^3, so R′3=158R3R'^3 = \dfrac{15}{8}R^3 and R′=151/32RR' = \dfrac{15^{1/3}}{2}R. The new mass of BB is 2MA+78MA=238MA2M_A + \dfrac{7}{8}M_A = \dfrac{23}{8}M_A.
  4. vA2=2G(MA/8)R/2=2GMA4Rv_A^2 = \dfrac{2G(M_A/8)}{R/2} = \dfrac{2GM_A}{4R} and vB2=2G(23MA/8)151/3R/2=2GMA4R⋅23151/3v_B^2 = \dfrac{2G(23M_A/8)}{15^{1/3}R/2} = \dfrac{2GM_A}{4R}\cdot\dfrac{23}{15^{1/3}}.
  5. So vBvA=23151/3\dfrac{v_B}{v_A} = \sqrt{\dfrac{23}{15^{1/3}}}. Comparing, 10n=2310n = 23, n=2.3n = 2.3.
AnswerAnswer: 2.30
Ask about this question
Q2

Physics, Question 2 (3 marks)

Nuclear reactions (threshold energy) · +3
The minimum kinetic energy needed by an alpha particle to cause the nuclear reaction 716N+24He→11H+819O^{16}_{7}\mathrm{N} + {}^{4}_{2}\mathrm{He} \rightarrow {}^{1}_{1}\mathrm{H} + {}^{19}_{8}\mathrm{O} in a laboratory frame is nn (in MeV). Assume that 716N^{16}_{7}\mathrm{N} is at rest in the laboratory frame. The masses of 716N^{16}_{7}\mathrm{N}, 24He^{4}_{2}\mathrm{He}, 11H^{1}_{1}\mathrm{H} and 819O^{19}_{8}\mathrm{O} can be taken to be 16.006 uu, 4.003 uu, 1.008 uu and 19.003 uu, respectively, where 1 u=930 MeV c−21\ u = 930\ \text{MeV}\,c^{-2}. The value of nn is ____.

Tests: Find the threshold energy of an endothermic reaction with a stationary target.

Show solution
  1. Q-value: Q=(16.006+4.003−1.008−19.003)×930=(−0.002)(930)=−1.86Q = (16.006 + 4.003 - 1.008 - 19.003) \times 930 = (-0.002)(930) = -1.86 MeV. The reaction is endothermic.
  2. At threshold the products move together with the centre-of-mass velocity, so part of the alpha's energy is locked in CM motion and cannot be used.

    Why: Momentum must be conserved, so the products can never be at rest in the lab.

  3. Threshold kinetic energy (target at rest): Kth=∣Q∣(1+mαmN)=1.86(1+4.00316.006)K_{th} = |Q|\left(1 + \dfrac{m_\alpha}{m_N}\right) = 1.86\left(1 + \dfrac{4.003}{16.006}\right) MeV.
  4. Kth=1.86×1.2501=2.3252K_{th} = 1.86 \times 1.2501 = 2.3252 MeV (the exact relativistic formula gives the same to four figures).
  5. To two decimals the paper accepts truncation, 2.322.32, or rounding, 2.332.33. The page gives the truncated value 2.322.32.
AnswerAnswer: 2.32 (2.325 MeV; rounding gives 2.33)
Ask about this question
Q3

Physics, Question 3 (3 marks)

Capacitors in circuits · +3
In the following circuit C1=12 μFC_1 = 12\ \mu F, C2=C3=4 μFC_2 = C_3 = 4\ \mu F and C4=C5=2 μFC_4 = C_5 = 2\ \mu F. The charge stored in C3C_3 is ____ μC\mu C. (The figure shows a rectangle. Its left side holds the 6 V battery and its right side the 2 V battery; the whole bottom edge is one plain wire. On the top edge, C1C_1 sits between the top-left corner and a junction point J; from J the top wire runs straight on to the top-right corner. From J, C2C_2 runs diagonally down to the bottom-left corner, C3C_3 runs straight down to the bottom wire, and C4C_4 runs diagonally down to the bottom-right part of the bottom wire. C5C_5 is a vertical branch between the top wire (right of J) and the bottom wire, beside the 2 V battery.)

Tests: Spot which nodes are the same wire and read the voltage across C3 directly.

Show solution
  1. Name the nodes. The top wire from J to the top-right corner is one node, call it J. The entire bottom edge is one plain wire, so it is one node, call it B.
  2. The 2 V battery is connected directly between the top-right corner (node J) and the bottom wire (node B). So ∣VJ−VB∣=2|V_J - V_B| = 2 V, fixed by an ideal battery.
  3. C3C_3 runs from J straight down to the bottom wire, so it is directly across the 2 V battery (as are C2C_2, C4C_4 and C5C_5).

    Why: Elements connected between the same two nodes share the same potential difference.

  4. Q3=C3V=4 μF×2 V=8 μCQ_3 = C_3 V = 4\ \mu F \times 2\ V = 8\ \mu C. The 6 V battery and C1C_1 only set the charge on C1C_1.
AnswerAnswer: 8 μC\mu C
Ask about this question
Q4

Physics, Question 4 (3 marks)

Refraction at lenses (image of an inclined rod) · +3
A rod of length 2 cm makes an angle 2π3\dfrac{2\pi}{3} rad with the principal axis of a thin convex lens. The lens has a focal length of 10 cm and is placed at a distance of 403\dfrac{40}{3} cm from the object as shown in the figure. The height of the image is 30313\dfrac{30\sqrt{3}}{13} cm and the angle made by it with respect to the principal axis is α\alpha rad. The value of α\alpha is πn\dfrac{\pi}{n} rad, where nn is ____. (The figure shows the lower end of the rod on the principal axis, 403\dfrac{40}{3} cm to the left of the lens; the rod leans up and away from the lens, the angle 2π3\dfrac{2\pi}{3} being marked between the rod and the axis on the lens side. On the right of the lens the image is drawn below the axis, its end on the axis farther from the lens, with height 30313\dfrac{30\sqrt{3}}{13} cm and angle α\alpha with the axis.)

Tests: Image the two ends of the rod separately and join them.

Show solution
  1. The rod makes 60∘60^\circ with the axis on the side away from the lens. Its foot is on the axis at u=−403u = -\dfrac{40}{3} cm; its top is 2cos⁡60∘=12\cos 60^\circ = 1 cm farther from the lens and 2sin⁡60∘=32\sin 60^\circ = \sqrt{3} cm above the axis.
  2. Foot: 1v=1f+1u=110−340=140\dfrac{1}{v} = \dfrac{1}{f} + \dfrac{1}{u} = \dfrac{1}{10} - \dfrac{3}{40} = \dfrac{1}{40}, so v=40v = 40 cm.
  3. Top: u=−433u = -\dfrac{43}{3} cm, 1v=110−343=13430\dfrac{1}{v} = \dfrac{1}{10} - \dfrac{3}{43} = \dfrac{13}{430}, so v=43013v = \dfrac{430}{13} cm. Magnification m=vu=−3013m = \dfrac{v}{u} = -\dfrac{30}{13}, image height 30133=30313\dfrac{30}{13}\sqrt{3} = \dfrac{30\sqrt{3}}{13} cm (inverted), matching the paper.
  4. Horizontal length of the image: 40−43013=901340 - \dfrac{430}{13} = \dfrac{90}{13} cm.
  5. tan⁡α=303/1390/13=13\tan\alpha = \dfrac{30\sqrt{3}/13}{90/13} = \dfrac{1}{\sqrt{3}}, so α=π6\alpha = \dfrac{\pi}{6} and n=6n = 6.
AnswerAnswer: 6
Ask about this question
Q5

Physics, Question 5 (3 marks)

Rolling motion and projectile · +3
At time t=0t = 0, a disk of radius 1 m starts to roll without slipping on a horizontal plane with an angular acceleration of α=23 rad s−2\alpha = \dfrac{2}{3}\ \text{rad s}^{-2}. A small stone is stuck to the disk. At t=0t = 0, it is at the contact point of the disk and the plane. Later, at time t=πt = \sqrt{\pi} s, the stone detaches itself and flies off tangentially from the disk. The maximum height (in m) reached by the stone measured from the plane is 12+x10\dfrac{1}{2} + \dfrac{x}{10}. The value of xx is ____. [Take g=10 m s−2g = 10\ \text{m s}^{-2}.]

Tests: Find the stone's height and vertical velocity at release, then treat it as a projectile.

Show solution
  1. At t=πt = \sqrt{\pi} s (starting from rest): ω=αt=23π\omega = \alpha t = \dfrac{2}{3}\sqrt{\pi} rad/s and the angle turned is θ=12αt2=π3\theta = \dfrac{1}{2}\alpha t^2 = \dfrac{\pi}{3}.
  2. The stone started at the contact point, so after turning θ\theta its height is R(1−cos⁡θ)=1−12=12R(1 - \cos\theta) = 1 - \dfrac{1}{2} = \dfrac{1}{2} m.
  3. In rolling, the velocity of any point equals ω×\omega \times (vector from the contact point to that point). Here v⃗=ωR(1−cos⁡θ, sin⁡θ)\vec v = \omega R(1 - \cos\theta,\ \sin\theta), so the vertical component is vy=ωRsin⁡θ=2π3⋅32=π3v_y = \omega R\sin\theta = \dfrac{2\sqrt{\pi}}{3}\cdot\dfrac{\sqrt{3}}{2} = \sqrt{\dfrac{\pi}{3}} m/s.
  4. After it leaves, the stone is a projectile: extra rise =vy22g=π/320=π60= \dfrac{v_y^2}{2g} = \dfrac{\pi/3}{20} = \dfrac{\pi}{60} m.
  5. Maximum height =12+π60= \dfrac{1}{2} + \dfrac{\pi}{60}, so x10=π60\dfrac{x}{10} = \dfrac{\pi}{60} and x=π6=0.5236x = \dfrac{\pi}{6} = 0.5236, which is 0.520.52 both truncated and rounded.
AnswerAnswer: 0.52
Ask about this question
Q6

Physics, Question 6 (3 marks)

Rolling on an incline (torque and friction) · +3
A solid sphere of mass 1 kg and radius 1 m rolls without slipping on a fixed inclined plane with an angle of inclination θ=30∘\theta = 30^\circ from the horizontal. Two forces of magnitude 1 N each, parallel to the incline, act on the sphere, both at distance r=0.5r = 0.5 m from the center of the sphere, as shown in the figure. The acceleration of the sphere down the plane is ____ m s−2\text{m s}^{-2}. (Take g=10 m s−2g = 10\ \text{m s}^{-2}.) (The figure shows a dotted line through the centre perpendicular to the incline, with length rr marked on each side of the centre. One force acts down the incline along the line offset rr from the centre toward the incline; the other acts up the incline along the line offset rr on the side away from the incline.)

Tests: Treat the two forces as a couple and add its torque to the rolling equations.

Show solution
  1. The two forces are equal and opposite, so they add nothing to the net force; they form a couple of torque 2×1×0.5=12 \times 1 \times 0.5 = 1 N m about the centre.
  2. Direction of the couple: the down-slope force acts below the centre and the up-slope force above it, so both turn the sphere backward, against the rolling-down spin.

    Why: Pushing the bottom of a ball forward, or its top backward, spins it backward.

  3. With friction ff up the incline: ma=mgsin⁡θ−fma = mg\sin\theta - f, i.e. a=5−fa = 5 - f. About the centre: Iα=fR−1I\alpha = fR - 1 with I=25mR2=0.4I = \dfrac{2}{5}mR^2 = 0.4 and α=a/R=a\alpha = a/R = a.
  4. So f=0.4a+1f = 0.4a + 1 and a=5−0.4a−1a = 5 - 0.4a - 1, giving 1.4a=41.4a = 4, a=207=2.857 m s−2a = \dfrac{20}{7} = 2.857\ \text{m s}^{-2}.
  5. To two decimals the paper accepts truncation, 2.852.85, or rounding, 2.862.86. The page gives the truncated value 2.852.85.
AnswerAnswer: 2.85 m s−2\text{m s}^{-2} (20/720/7; rounding gives 2.86)
Ask about this question
Q7

Physics, Question 7 (3 marks)

LC oscillations with a constant EMF · +3
Consider an LC circuit, with inductance L=0.1L = 0.1 H and capacitance C=10−3C = 10^{-3} F, kept on a plane. The area of the circuit is 1 m2\text{m}^2. It is placed in a constant magnetic field of strength B0B_0 which is perpendicular to the plane of the circuit. At time t=0t = 0, the magnetic field strength starts increasing linearly as B=B0+βtB = B_0 + \beta t with β=0.04 T s−1\beta = 0.04\ \text{T s}^{-1}. The maximum magnitude of the current in the circuit is ____ mA.

Tests: Turn the changing flux into a constant EMF and solve the driven LC circuit.

Show solution
  1. Induced EMF: ε=AdBdt=1×0.04=0.04\varepsilon = A\dfrac{dB}{dt} = 1 \times 0.04 = 0.04 V, constant from t=0t = 0. The circuit behaves like an LC circuit with a 0.04 V battery switched on at t=0t = 0.
  2. Ldidt+qC=εL\dfrac{di}{dt} + \dfrac{q}{C} = \varepsilon with q=0q = 0, i=0i = 0 at t=0t = 0 gives q=Cε(1−cos⁡ωt)q = C\varepsilon(1 - \cos\omega t) and i=Cεωsin⁡ωti = C\varepsilon\omega\sin\omega t.
  3. ω=1LC=110−4=100\omega = \dfrac{1}{\sqrt{LC}} = \dfrac{1}{\sqrt{10^{-4}}} = 100 rad/s.
  4. imax=Cεω=10−3×0.04×100=4×10−3i_{max} = C\varepsilon\omega = 10^{-3} \times 0.04 \times 100 = 4 \times 10^{-3} A =4= 4 mA.
AnswerAnswer: 4 mA
Ask about this question
Q8

Physics, Question 8 (3 marks)

Projectile motion · +3
A projectile is fired from horizontal ground with speed vv and projection angle θ\theta. When the acceleration due to gravity is gg, the range of the projectile is dd. If at the highest point in its trajectory, the projectile enters a different region where the effective acceleration due to gravity is g′=g0.81g' = \dfrac{g}{0.81}, then the new range is d′=ndd' = nd. The value of nn is ____.

Tests: Split the flight at the top and redo only the descending half with the new g.

Show solution
  1. Up to the highest point nothing changes: the projectile covers d/2d/2 horizontally in time T/2T/2, where T/2=vsin⁡θgT/2 = \dfrac{v\sin\theta}{g}.
  2. From the top it falls height H=v2sin⁡2θ2gH = \dfrac{v^2\sin^2\theta}{2g} from rest vertically, with horizontal speed vcos⁡θv\cos\theta. Fall time with g′g': t′=2Hg′=0.812Hg=0.9⋅T2t' = \sqrt{\dfrac{2H}{g'}} = \sqrt{0.81}\sqrt{\dfrac{2H}{g}} = 0.9\cdot\dfrac{T}{2}.
  3. Horizontal distance in the second half =0.9×d2=0.45d= 0.9 \times \dfrac{d}{2} = 0.45d.
  4. d′=0.5d+0.45d=0.95dd' = 0.5d + 0.45d = 0.95d, so n=0.95n = 0.95.
AnswerAnswer: 0.95
Ask about this question

Physics, Section 2: 6 questions, one or more options correct: +4 only if all the correct options are chosen; +3 if all four are correct and only three are chosen; +2 if three or more are correct and only two are chosen, both correct; +1 if two or more are correct and only one is chosen, and it is correct; 0 if unanswered; −2 in all other cases

Q9

Physics, Question 9 (4 marks)

Capacitors with dielectrics · +4 / −2
A medium having dielectric constant K>1K > 1 fills the space between the plates of a parallel plate capacitor. The plates have large area, and the distance between them is dd. The capacitor is connected to a battery of voltage VV, as shown in Figure (a). Now, both the plates are moved by a distance of d2\dfrac{d}{2} from their original positions, as shown in Figure (b). (Figure (a): the dielectric slab of thickness dd fills the gap between the plates, which are joined to the battery VV. Figure (b): each plate has moved d/2d/2 outward, so the slab of thickness dd sits in the middle with an air gap of d/2d/2 on each side; the battery stays connected.) In the process of going from the configuration depicted in Figure (a) to that in Figure (b), which of the following statement(s) is(are) correct?
  1. (A)The electric field inside the dielectric material is reduced by a factor of 2K2K.
  2. (B)The capacitance is decreased by a factor of 1K+1\dfrac{1}{K+1}.
  3. (C)The voltage between the capacitor plates is increased by a factor of (K+1)(K+1).
  4. (D)The work done in the process DOES NOT depend on the presence of the dielectric material.

Tests: Compare capacitance and field before and after with the battery kept connected.

Show solution
  1. Before: Ca=Kε0AdC_a = \dfrac{K\varepsilon_0 A}{d}, field in the dielectric Ea=VdE_a = \dfrac{V}{d}.
  2. After: air dd (total) and dielectric dd in series, Cb=ε0Ad+d/K=Kε0Ad(K+1)C_b = \dfrac{\varepsilon_0 A}{d + d/K} = \dfrac{K\varepsilon_0 A}{d(K+1)}. So Cb=CaK+1C_b = \dfrac{C_a}{K+1}: the capacitance becomes 1K+1\dfrac{1}{K+1} of its value. (B) true.
  3. Field in the dielectric after: Eair=KEbE_{air} = KE_b and V=Eaird+Ebd=(K+1)EbdV = E_{air}d + E_b d = (K+1)E_b d, so Eb=V(K+1)d=EaK+1E_b = \dfrac{V}{(K+1)d} = \dfrac{E_a}{K+1}. It drops by a factor K+1K+1, not 2K2K. (A) false.
  4. The battery stays connected, so the voltage between the plates stays VV. (C) false.
  5. The work done depends on the change in 12CV2\dfrac{1}{2}CV^2 and the battery's work VΔQV\Delta Q, both of which depend on KK (without the dielectric the capacitance would only halve). (D) false.
AnswerAnswer: (B)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Kirchhoff's laws · +4 / −2
The figure shows a circuit having eight resistances of 1 Ω1\ \Omega each, labelled R1R_1 to R8R_8, and two ideal batteries with voltages E1=12\mathcal{E}_1 = 12 V and E2=6\mathcal{E}_2 = 6 V. (The figure is a diamond with corners Top, Left, Right and Bottom and a centre junction O. Edges: R6R_6 Left to Top, R7R_7 Top to Right, R5R_5 Left to Bottom, R8R_8 Bottom to Right. Vertical: R2R_2 from Top to O and R4R_4 from O to Bottom. Horizontal: from Left, E2\mathcal{E}_2 then R3R_3 to O; from O, E1\mathcal{E}_1 then R1R_1 to Right. In both batteries the longer (positive) plate is on the left.) Which of the following statement(s) is(are) correct?
  1. (A)The magnitude of current flowing through R1R_1 is 7.2 A.
  2. (B)The magnitude of current flowing through R2R_2 is 1.2 A.
  3. (C)The magnitude of current flowing through R3R_3 is 4.8 A.
  4. (D)The magnitude of current flowing through R5R_5 is 2.4 A.

Tests: Use node potentials and the top-bottom symmetry to find every branch current.

Show solution
  1. Take VO=0V_O = 0, VL=aV_L = a, VR=bV_R = b. Top and Bottom are mirror images (R6=R5R_6 = R_5, R7=R8R_7 = R_8, R2=R4R_2 = R_4), so VT=VBV_T = V_B.
  2. Branch L to O: a−6−I3=0a - 6 - I_3 = 0, so I3=a−6I_3 = a - 6 (from L to O). Branch O to R: 0−12−I1=b0 - 12 - I_1 = b, so I1=−12−bI_1 = -12 - b (from O to R).
  3. KCL at Top: (a−VT)+(b−VT)−VT=0(a - V_T) + (b - V_T) - V_T = 0, so VT=a+b3V_T = \dfrac{a+b}{3}. KCL at L: (a−6)+2(a−VT)=0(a - 6) + 2(a - V_T) = 0, giving 7a−2b=187a - 2b = 18. KCL at R: (−12−b)+2(VT−b)=0(-12 - b) + 2(V_T - b) = 0, giving 2a−7b=362a - 7b = 36.
  4. Solving: a=1.2a = 1.2 V, b=−4.8b = -4.8 V, VT=VB=−1.2V_T = V_B = -1.2 V.
  5. ∣I1∣=∣−12+4.8∣=7.2|I_1| = |-12 + 4.8| = 7.2 A. (A) true. ∣I2∣=∣VT−VO∣=1.2|I_2| = |V_T - V_O| = 1.2 A. (B) true.
  6. ∣I3∣=∣1.2−6∣=4.8|I_3| = |1.2 - 6| = 4.8 A. (C) true. ∣I5∣=∣VL−VB∣=1.2+1.2=2.4|I_5| = |V_L - V_B| = 1.2 + 1.2 = 2.4 A. (D) true.
AnswerAnswer: (A), (B), (C), (D)
Ask about this question
Q11

Physics, Question 11 (4 marks)

Fluid flow of an ideal gas (adiabatic) · +4 / −2
An ideal gas of density ρ=0.2 kg m−3\rho = 0.2\ \text{kg m}^{-3} enters a chimney of height hh at the rate of α=0.8 kg s−1\alpha = 0.8\ \text{kg s}^{-1} from its lower end, and escapes through the upper end as shown in the figure. The cross-sectional area of the lower end is A1=0.1 m2A_1 = 0.1\ \text{m}^2 and the upper end is A2=0.4 m2A_2 = 0.4\ \text{m}^2. The pressure and the temperature of the gas at the lower end are 600 Pa and 300 K, respectively, while its temperature at the upper end is 150 K. The chimney is heat insulated so that the gas undergoes adiabatic expansion. Take g=10 m s−2g = 10\ \text{m s}^{-2} and the ratio of specific heats of the gas γ=2\gamma = 2. Ignore atmospheric pressure. (The figure shows a vertical chimney: a narrow tube of area A1A_1 at the bottom widening into a wide top of area A2A_2, height hh, gas flowing upward.) Which of the following statement(s) is(are) correct?
  1. (A)The pressure of the gas at the upper end of the chimney is 300 Pa.
  2. (B)The velocity of the gas at the lower end of the chimney is 40 m s−140\ \text{m s}^{-1} and at the upper end is 20 m s−120\ \text{m s}^{-1}.
  3. (C)The height of the chimney is 590 m.
  4. (D)The density of the gas at the upper end is 0.05 kg m−30.05\ \text{kg m}^{-3}.

Tests: Use the adiabatic relation for density and pressure, continuity for speeds, and energy for height.

Show solution
  1. Adiabatic with γ=2\gamma = 2: Tρ1−γ=T\rho^{1-\gamma} = constant, i.e. T/ρT/\rho constant. TT halves, so ρ2=0.1 kg m−3\rho_2 = 0.1\ \text{kg m}^{-3}. (D) false.
  2. P∝ρTP \propto \rho T: P2=600×12×12=150P_2 = 600 \times \dfrac{1}{2} \times \dfrac{1}{2} = 150 Pa. (A) false.
  3. Mass flow α=ρAv\alpha = \rho A v: v1=0.80.2×0.1=40 m s−1v_1 = \dfrac{0.8}{0.2 \times 0.1} = 40\ \text{m s}^{-1}, v2=0.80.1×0.4=20 m s−1v_2 = \dfrac{0.8}{0.1 \times 0.4} = 20\ \text{m s}^{-1}. (B) true.
  4. Energy per unit mass along the flow (no heat): v22+gz+γγ−1Pρ\dfrac{v^2}{2} + gz + \dfrac{\gamma}{\gamma - 1}\dfrac{P}{\rho} is constant (the last term is the enthalpy: internal energy plus flow work).

    Why: For a compressible gas, Bernoulli's P/ρ is replaced by the enthalpy per unit mass.

  5. γγ−1=2\dfrac{\gamma}{\gamma-1} = 2: bottom 800+2×3000=6800800 + 2 \times 3000 = 6800, top 200+2×1500+10h200 + 2 \times 1500 + 10h. So 10h=360010h = 3600, h=360h = 360 m. (C) false.
AnswerAnswer: (B)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Reflection (plane mirrors) · +4 / −2
Three plane mirrors form an equilateral triangle with each side of length LL. There is a small hole at a distance l>0l > 0 from one of the corners as shown in the figure. A ray of light is passed through the hole at an angle θ\theta and can only come out through the same hole. The cross section of the mirror configuration and the ray of light lie on the same plane. (The figure shows the hole on the base, at distance ll from the right corner. The ray enters from below, travelling up and to the left; θ\theta is the angle between the ray and the base, marked on the right side of the hole.) Which of the following statement(s) is(are) correct?
  1. (A)The ray of light will come out for θ=30∘\theta = 30^\circ, for 0<l<L0 < l < L.
  2. (B)There is an angle for l=L2l = \dfrac{L}{2} at which the ray of light will come out after two reflections.
  3. (C)The ray of light will NEVER come out for θ=60∘\theta = 60^\circ, and l=L3l = \dfrac{L}{3}.
  4. (D)The ray of light will come out for θ=60∘\theta = 60^\circ, and 0<l<L20 < l < \dfrac{L}{2} after six reflections.

Tests: Trace the ray using the 60° geometry of the equilateral triangle.

Show solution
  1. Inside the triangle the ray moves at angle θ\theta to the base, heading toward the left side (which makes 60∘60^\circ with the base).
  2. (A) θ=30∘\theta = 30^\circ: the ray makes 90∘90^\circ with the left side, so it strikes it normally (the foot of the perpendicular from the hole always lies on that side) and retraces its path to the hole for every 0<l<L0 < l < L. (A) true.
  3. (B) l=L/2l = L/2, θ=60∘\theta = 60^\circ: the ray runs from the midpoint of the base to the midpoint of the left side, reflects to the midpoint of the right side, then back to the hole: out after 2 reflections. (B) true.
  4. (C), (D) θ=60∘\theta = 60^\circ: the ray is parallel to the right side. It hits the left side at distance L−lL - l from the left corner, goes off parallel to the base, hits the right side, comes down parallel to the left side and meets the base at distance L−lL - l from the right corner. A second round brings it to distance ll from the right corner: the hole.
  5. So for l=L/3l = L/3 it comes out after 5 reflections (left, right, base, left, right). (C) false. For 0<l<L/20 < l < L/2 it is 5 reflections, not 6. (D) false.
AnswerAnswer: (A), (B)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Electrostatics (field and potential of point charges) · +4 / −2
Six charges are placed around a regular hexagon of side length aa as shown in the figure. Five of them have charge qq, and the remaining one has charge xx. The perpendicular from each charge to the nearest hexagon side passes through the center O of the hexagon and is bisected by the side. (The figure shows the hexagon with one charge outside each side: qq above the top side, qq at upper left, upper right, lower left and lower right, and xx below the bottom side.) Which of the following statement(s) is(are) correct in SI units?
  1. (A)When x=qx = q, the magnitude of the electric field at O is zero.
  2. (B)When x=−qx = -q, the magnitude of the electric field at O is q6πϵ0a2\dfrac{q}{6\pi\epsilon_0 a^2}.
  3. (C)When x=2qx = 2q, the potential at O is 7q43πϵ0a\dfrac{7q}{4\sqrt{3}\pi\epsilon_0 a}.
  4. (D)When x=−3qx = -3q, the potential at O is −3q43πϵ0a-\dfrac{3q}{4\sqrt{3}\pi\epsilon_0 a}.

Tests: Locate the charges from the geometry, then use symmetry for the field and add potentials.

Show solution
  1. O is at distance 32a\dfrac{\sqrt{3}}{2}a from each side, and each charge is twice as far: r=3ar = \sqrt{3}a. The six charges sit at 60∘60^\circ intervals on a circle of radius 3a\sqrt{3}a.
  2. (A) Six equal charges symmetric about O: fields cancel. (A) true.
  3. (B) Charges q,q,q,q,q,−qq,q,q,q,q,-q = six charges qq plus a charge −2q-2q at the bottom. Field =2q4πϵ0(3a2)=q6πϵ0a2= \dfrac{2q}{4\pi\epsilon_0 (3a^2)} = \dfrac{q}{6\pi\epsilon_0 a^2}. (B) true.
  4. (C) V=5q+2q4πϵ03a=7q43πϵ0aV = \dfrac{5q + 2q}{4\pi\epsilon_0\sqrt{3}a} = \dfrac{7q}{4\sqrt{3}\pi\epsilon_0 a}. (C) true.
  5. (D) V=5q−3q4πϵ03a=2q43πϵ0aV = \dfrac{5q - 3q}{4\pi\epsilon_0\sqrt{3}a} = \dfrac{2q}{4\sqrt{3}\pi\epsilon_0 a}, positive, not −3q43πϵ0a-\dfrac{3q}{4\sqrt{3}\pi\epsilon_0 a}. (D) false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q14

Physics, Question 14 (4 marks)

Nuclear binding energy · +4 / −2
The binding energy of nucleons in a nucleus can be affected by the pairwise Coulomb repulsion. Assume that all nucleons are uniformly distributed inside the nucleus. Let the binding energy of a proton be EbpE_b^p and the binding energy of a neutron be EbnE_b^n in the nucleus. Which of the following statement(s) is(are) correct?
  1. (A)Ebp−EbnE_b^p - E_b^n is proportional to Z(Z−1)Z(Z-1) where ZZ is the atomic number of the nucleus.
  2. (B)Ebp−EbnE_b^p - E_b^n is proportional to A−13A^{-\frac{1}{3}} where AA is the mass number of the nucleus.
  3. (C)Ebp−EbnE_b^p - E_b^n is positive.
  4. (D)EbpE_b^p increases if the nucleus undergoes a beta decay emitting a positron.

Tests: Express the proton-neutron difference as the Coulomb energy of a uniformly charged sphere.

Show solution
  1. The nuclear force treats protons and neutrons alike, so the only difference between EbpE_b^p and EbnE_b^n is the Coulomb repulsion felt by the protons.
  2. For ZZ protons spread uniformly in a sphere of radius R=R0A1/3R = R_0A^{1/3} the Coulomb energy is 35Z(Z−1)e24πϵ0R\dfrac{3}{5}\dfrac{Z(Z-1)e^2}{4\pi\epsilon_0 R}: there are Z(Z−1)2\dfrac{Z(Z-1)}{2} pairs, each with energy of order e24πϵ0R\dfrac{e^2}{4\pi\epsilon_0 R}. This is the Coulomb term of the semi-empirical mass formula, and it is what makes EbpE_b^p differ from EbnE_b^n.

    Why: The question builds the difference from pairwise repulsion, which is this term.

  3. So Ebp−Ebn=−35Z(Z−1)e24πϵ0R0A−1/3E_b^p - E_b^n = -\dfrac{3}{5}\dfrac{Z(Z-1)e^2}{4\pi\epsilon_0 R_0}A^{-1/3}: proportional to Z(Z−1)Z(Z-1) (A) true and to A−1/3A^{-1/3} (B) true.
  4. The repulsion reduces the binding of protons, so Ebp−Ebn<0E_b^p - E_b^n < 0. (C) false.
  5. Positron emission turns a proton into a neutron: ZZ drops by 1 with AA unchanged, so Z(Z−1)Z(Z-1) falls, the repulsion weakens and EbpE_b^p increases. (D) true.
  6. Note: if EbpE_b^p is read strictly as the energy to pull out one proton, the Coulomb part is the change in that energy when Z→Z−1Z \rightarrow Z-1, which goes as (Z−1)A−1/3(Z-1)A^{-1/3}. (B), (C) and (D) are unchanged; the answer (A, B, D) follows the pairwise-repulsion reading the question sets up.
AnswerAnswer: (A), (B), (D)
Ask about this question

Physics, Section 3: 4 List-I/List-II matching questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Physics, Question 15 (3 marks)

Electromagnetic induction (torque on an induced current loop) · +3 / −1
A small circular loop of area AA and resistance RR is fixed on a horizontal xyxy-plane with the center of the loop always on the axis n^\hat{n} of a long solenoid. The solenoid has mm turns per unit length and carries current II counterclockwise as shown in the figure. The magnetic field due to the solenoid is in n^\hat{n} direction. List-I gives time dependences of n^\hat{n} in terms of a constant angular frequency ω\omega. List-II gives the torques experienced by the circular loop at time t=π6ωt = \dfrac{\pi}{6\omega}. Let α=A2μ02m2I2ω2R\alpha = \dfrac{A^2\mu_0^2 m^2 I^2 \omega}{2R}. (The figure shows the solenoid tilted from the vertical zz-axis, its axis along n^\hat{n}, and the small horizontal loop inside it with its centre on the axis.) Which one of the following options is correct?
List-IList-II
(I) 12(sin⁡ωt j^+cos⁡ωt k^)\dfrac{1}{\sqrt{2}}(\sin\omega t\,\hat{j} + \cos\omega t\,\hat{k})(P) 0
(II) 12(sin⁡ωt i^+cos⁡ωt j^)\dfrac{1}{\sqrt{2}}(\sin\omega t\,\hat{i} + \cos\omega t\,\hat{j})(Q) −α4i^-\dfrac{\alpha}{4}\hat{i}
(III) 12(sin⁡ωt i^+cos⁡ωt k^)\dfrac{1}{\sqrt{2}}(\sin\omega t\,\hat{i} + \cos\omega t\,\hat{k})(R) 3α4i^\dfrac{3\alpha}{4}\hat{i}
(IV) 12(cos⁡ωt j^+sin⁡ωt k^)\dfrac{1}{\sqrt{2}}(\cos\omega t\,\hat{j} + \sin\omega t\,\hat{k})(S) α4j^\dfrac{\alpha}{4}\hat{j}
(T) −3α4i^-\dfrac{3\alpha}{4}\hat{i}
  1. (A)I →\rightarrow Q, II →\rightarrow P, III →\rightarrow S, IV →\rightarrow T
  2. (B)I →\rightarrow S, II →\rightarrow T, III →\rightarrow Q, IV →\rightarrow P
  3. (C)I →\rightarrow Q, II →\rightarrow P, III →\rightarrow S, IV →\rightarrow R
  4. (D)I →\rightarrow T, II →\rightarrow Q, III →\rightarrow P, IV →\rightarrow R

Tests: Find the induced current from the changing flux, then the torque μ × B for each orientation.

Show solution
  1. Take the field as printed, B⃗=μ0mI n^\vec B = \mu_0 mI\,\hat{n}. Flux through the loop (area vector Ak^A\hat{k}): Φ=μ0mIA nz\Phi = \mu_0 mIA\,n_z. Induced current i=−1RdΦdti = -\dfrac{1}{R}\dfrac{d\Phi}{dt}, magnetic moment μ⃗=iAk^\vec\mu = iA\hat{k}, torque τ⃗=μ⃗×B⃗\vec\tau = \vec\mu \times \vec B. At t=π6ωt = \dfrac{\pi}{6\omega}: sin⁡ωt=12\sin\omega t = \dfrac{1}{2}, cos⁡ωt=32\cos\omega t = \dfrac{\sqrt{3}}{2}.
  2. (I) nz=cos⁡ωt2n_z = \dfrac{\cos\omega t}{\sqrt{2}}, μ⃗=μ0mIA2ωsin⁡ωt2Rk^\vec\mu = \dfrac{\mu_0 mIA^2\omega\sin\omega t}{\sqrt{2}R}\hat{k}. τ⃗=μ02m2I2A2ω2Rsin⁡2ωt (k^×j^)=−αsin⁡2ωt i^=−α4i^\vec\tau = \dfrac{\mu_0^2m^2I^2A^2\omega}{2R}\sin^2\omega t\,(\hat{k}\times\hat{j}) = -\alpha\sin^2\omega t\,\hat{i} = -\dfrac{\alpha}{4}\hat{i}. I →\rightarrow Q.
  3. (II) nz=0n_z = 0: no flux, no current, no torque. II →\rightarrow P.
  4. (III) Same nzn_z as (I), same μ⃗\vec\mu. τ⃗=αsin⁡2ωt (k^×i^)=αsin⁡2ωt j^=α4j^\vec\tau = \alpha\sin^2\omega t\,(\hat{k}\times\hat{i}) = \alpha\sin^2\omega t\,\hat{j} = \dfrac{\alpha}{4}\hat{j}. III →\rightarrow S.
  5. (IV) nz=sin⁡ωt2n_z = \dfrac{\sin\omega t}{\sqrt{2}}, μ⃗=−μ0mIA2ωcos⁡ωt2Rk^\vec\mu = -\dfrac{\mu_0 mIA^2\omega\cos\omega t}{\sqrt{2}R}\hat{k}. τ⃗=−αcos⁡2ωt (k^×j^)=αcos⁡2ωt i^=3α4i^\vec\tau = -\alpha\cos^2\omega t\,(\hat{k}\times\hat{j}) = \alpha\cos^2\omega t\,\hat{i} = \dfrac{3\alpha}{4}\hat{i}. IV →\rightarrow R.
  6. The flaw: each printed n^\hat{n} has magnitude 12\dfrac{1}{\sqrt{2}}, so it is not a unit vector, and the published key treats the question as a bonus. With the printed vectors used as written, the torques match option (C) exactly; the 2 in α\alpha is the (1/2)2(1/\sqrt{2})^2 of those vectors. With true unit vectors every non-zero torque would double (−α/2 i^-\alpha/2\,\hat{i}, α/2 j^\alpha/2\,\hat{j}, 3α/2 i^3\alpha/2\,\hat{i}) and no option would fit.
AnswerAnswer: (C) I →\rightarrow Q, II →\rightarrow P, III →\rightarrow S, IV →\rightarrow R (with n^\hat{n} taken as printed; the published key treats the question as a bonus)
Ask about this question
Q16

Physics, Question 16 (3 marks)

Relative velocity · +3 / −1
List I describes four systems, each with two particles AA and BB in relative motion as shown in figures. List II gives possible magnitudes of their relative velocities (in m s−1\text{m s}^{-1}) at time t=π3t = \dfrac{\pi}{3} s. (Figures: (I) both particles on the circle, A at θ=0\theta = 0 on the xx-axis and B at θ=π/2\theta = \pi/2 on the yy-axis, both moving counterclockwise. (II) A on the left fired at t=0t = 0 at 45∘45^\circ toward the right; B on the right fired at t=0.1t = 0.1 s at 45∘45^\circ toward the left, so they move toward each other. (III) two springs along xx, B above A. (IV) A on a horizontal circle about the zz-axis in the xyxy-plane; B above, moving straight up along zz.)
List-IList-II
(I) AA and BB are moving on a horizontal circle of radius 1 m with uniform angular speed ω=1 rad s−1\omega = 1\ \text{rad s}^{-1}. The initial angular positions of AA and BB at time t=0t = 0 are θ=0\theta = 0 and θ=π2\theta = \dfrac{\pi}{2}, respectively.(P) 3+12\dfrac{\sqrt{3}+1}{2}
(II) Projectiles AA and BB are fired (in the same vertical plane) at t=0t = 0 and t=0.1t = 0.1 s respectively, with the same speed v=5π2 m s−1v = \dfrac{5\pi}{\sqrt{2}}\ \text{m s}^{-1} and at 45∘45^\circ from the horizontal plane. The initial separation between AA and BB is large enough so that they do not collide. (g=10 m s−2g = 10\ \text{m s}^{-2}).(Q) (3−1)2\dfrac{(\sqrt{3}-1)}{\sqrt{2}}
(III) Two harmonic oscillators AA and BB moving in the xx direction according to xA=x0sin⁡tt0x_A = x_0\sin\dfrac{t}{t_0} and xB=x0sin⁡(tt0+π2)x_B = x_0\sin\left(\dfrac{t}{t_0} + \dfrac{\pi}{2}\right) respectively, starting from t=0t = 0. Take x0=1x_0 = 1 m, t0=1t_0 = 1 s.(R) 10\sqrt{10}
(IV) Particle AA is rotating in a horizontal circular path of radius 1 m on the xyxy plane, with constant angular speed ω=1 rad s−1\omega = 1\ \text{rad s}^{-1}. Particle BB is moving up at a constant speed 3 m s−13\ \text{m s}^{-1} in the vertical direction as shown in the figure. (Ignore gravity.)(S) 2\sqrt{2}
(T) 25π2+1\sqrt{25\pi^2 + 1}
  1. (A)I →\rightarrow R, II →\rightarrow T, III →\rightarrow P, IV →\rightarrow S
  2. (B)I →\rightarrow S, II →\rightarrow P, III →\rightarrow Q, IV →\rightarrow R
  3. (C)I →\rightarrow S, II →\rightarrow T, III →\rightarrow P, IV →\rightarrow R
  4. (D)I →\rightarrow T, II →\rightarrow P, III →\rightarrow R, IV →\rightarrow S

Tests: Write both velocity vectors at t = π/3 s and take the magnitude of their difference.

Show solution
  1. (I) Both move at speed 11 m/s, 90∘90^\circ apart on the circle, so their velocities are always perpendicular: ∣v⃗A−v⃗B∣=12+12=2|\vec v_A - \vec v_B| = \sqrt{1^2 + 1^2} = \sqrt{2}. I →\rightarrow S.
  2. (II) v2=5π2\dfrac{v}{\sqrt{2}} = \dfrac{5\pi}{2}. A moves right, B left: Δvx=5π\Delta v_x = 5\pi. Both have the same initial vyv_y but B has fallen 0.1 s less: Δvy=−g(0.1)=−1\Delta v_y = -g(0.1) = -1. Both are still in flight at π/3\pi/3 s (flight time π/2\pi/2 s). ∣Δv⃗∣=25π2+1|\Delta\vec v| = \sqrt{25\pi^2 + 1}. II →\rightarrow T.
  3. (III) vA=cos⁡tv_A = \cos t, vB=cos⁡(t+π2)=−sin⁡tv_B = \cos\left(t + \dfrac{\pi}{2}\right) = -\sin t. At t=π/3t = \pi/3: vA=12v_A = \dfrac{1}{2}, vB=−32v_B = -\dfrac{\sqrt{3}}{2}, so ∣vA−vB∣=3+12|v_A - v_B| = \dfrac{\sqrt{3}+1}{2}. III →\rightarrow P.
  4. (IV) A's velocity (1 m/s) is horizontal and B's (3 m/s) vertical, always perpendicular: 1+9=10\sqrt{1 + 9} = \sqrt{10}. IV →\rightarrow R.
AnswerAnswer: (C) I →\rightarrow S, II →\rightarrow T, III →\rightarrow P, IV →\rightarrow R
Ask about this question
Q17

Physics, Question 17 (3 marks)

First law of thermodynamics · +3 / −1
List I describes thermodynamic processes in four different systems. List II gives the magnitudes (either exactly or as a close approximation) of possible changes in the internal energy of the system due to the process.
List-IList-II
(I) 10−310^{-3} kg of water at 100∘100^\circC is converted to steam at the same temperature, at a pressure of 10510^5 Pa. The volume of the system changes from 10−6 m310^{-6}\ \text{m}^3 to 10−3 m310^{-3}\ \text{m}^3 in the process. Latent heat of water = 2250 kJ/kg.(P) 2 kJ
(II) 0.2 moles of a rigid diatomic ideal gas with volume VV at temperature 500 K undergoes an isobaric expansion to volume 3V3V. Assume R=8.0 J mol−1K−1R = 8.0\ \text{J mol}^{-1}\text{K}^{-1}.(Q) 7 kJ
(III) One mole of a monatomic ideal gas is compressed adiabatically from volume V=13 m3V = \dfrac{1}{3}\ \text{m}^3 and pressure 2 kPa to volume V8\dfrac{V}{8}.(R) 4 kJ
(IV) Three moles of a diatomic ideal gas whose molecules can vibrate, is given 9 kJ of heat and undergoes isobaric expansion.(S) 5 kJ
(T) 3 kJ
  1. (A)I →\rightarrow T, II →\rightarrow R, III →\rightarrow S, IV →\rightarrow Q
  2. (B)I →\rightarrow S, II →\rightarrow P, III →\rightarrow T, IV →\rightarrow P
  3. (C)I →\rightarrow P, II →\rightarrow R, III →\rightarrow T, IV →\rightarrow Q
  4. (D)I →\rightarrow Q, II →\rightarrow R, III →\rightarrow S, IV →\rightarrow T

Tests: Find ΔU for each process from the first law or from nCvΔT.

Show solution
  1. (I) Q=mL=10−3×2250=2.25Q = mL = 10^{-3} \times 2250 = 2.25 kJ; W=PΔV=105×(10−3−10−6)≈0.1W = P\Delta V = 10^5 \times (10^{-3} - 10^{-6}) \approx 0.1 kJ. ΔU=2.25−0.1=2.15≈2\Delta U = 2.25 - 0.1 = 2.15 \approx 2 kJ. I →\rightarrow P.
  2. (II) Isobaric V→3VV \rightarrow 3V: TT goes 500 K →\rightarrow 1500 K. Rigid diatomic, CV=52RC_V = \dfrac{5}{2}R: ΔU=0.2×52×8×1000=4000\Delta U = 0.2 \times \dfrac{5}{2} \times 8 \times 1000 = 4000 J =4= 4 kJ. II →\rightarrow R.
  3. (III) γ=53\gamma = \dfrac{5}{3}: P2=2×85/3=64P_2 = 2 \times 8^{5/3} = 64 kPa, V2=124 m3V_2 = \dfrac{1}{24}\ \text{m}^3. ΔU=P2V2−P1V1γ−1=6424−232/3\Delta U = \dfrac{P_2V_2 - P_1V_1}{\gamma - 1} = \dfrac{\frac{64}{24} - \frac{2}{3}}{2/3} kJ =22/3=3= \dfrac{2}{2/3} = 3 kJ. III →\rightarrow T.
  4. (IV) With vibration, CV=72RC_V = \dfrac{7}{2}R and CP=92RC_P = \dfrac{9}{2}R. Isobaric: ΔU=QCVCP=9×79=7\Delta U = Q\dfrac{C_V}{C_P} = 9 \times \dfrac{7}{9} = 7 kJ. IV →\rightarrow Q.
AnswerAnswer: (C) I →\rightarrow P, II →\rightarrow R, III →\rightarrow T, IV →\rightarrow Q
Ask about this question
Q18

Physics, Question 18 (3 marks)

Combination of lenses · +3 / −1
List I contains four combinations of two lenses (1 and 2) whose focal lengths (in cm) are indicated in the figures. In all cases, the object is placed 20 cm from the first lens on the left, and the distance between the two lenses is 5 cm. List II contains the positions of the final images. (Figures: (I) lens 1 biconvex f=+10f = +10, lens 2 plano-convex f=+15f = +15; (II) lens 1 f=+10f = +10, lens 2 biconcave f=−10f = -10; (III) lens 1 f=+10f = +10, lens 2 plano-concave f=−20f = -20; (IV) lens 1 biconcave f=−20f = -20, lens 2 biconvex f=+10f = +10.)
List-IList-II
(I) f1=+10f_1 = +10, f2=+15f_2 = +15(P) Final image is formed at 7.5 cm on the right side of lens 2.
(II) f1=+10f_1 = +10, f2=−10f_2 = -10(Q) Final image is formed at 60.0 cm on the right side of lens 2.
(III) f1=+10f_1 = +10, f2=−20f_2 = -20(R) Final image is formed at 30.0 cm on the left side of lens 2.
(IV) f1=−20f_1 = -20, f2=+10f_2 = +10(S) Final image is formed at 6.0 cm on the right side of lens 2.
(T) Final image is formed at 30.0 cm on the right side of lens 2.
  1. (A)(I) →\rightarrow P; (II) →\rightarrow R; (III) →\rightarrow Q; (IV) →\rightarrow T
  2. (B)(I) →\rightarrow Q; (II) →\rightarrow P; (III) →\rightarrow T; (IV) →\rightarrow S
  3. (C)(I) →\rightarrow P; (II) →\rightarrow T; (III) →\rightarrow R; (IV) →\rightarrow Q
  4. (D)(I) →\rightarrow T; (II) →\rightarrow S; (III) →\rightarrow Q; (IV) →\rightarrow R

Tests: Image through lens 1, then use that image (real or virtual) as the object for lens 2.

Show solution
  1. For f1=+10f_1 = +10, u=−20u = -20: 1v=110−120\dfrac{1}{v} = \dfrac{1}{10} - \dfrac{1}{20}, v=20v = 20 cm, i.e. 15 cm beyond lens 2. That is a virtual object for lens 2 with u2=+15u_2 = +15 cm.
  2. (I) f2=+15f_2 = +15: 1v=115+115\dfrac{1}{v} = \dfrac{1}{15} + \dfrac{1}{15}, v=7.5v = 7.5 cm right of lens 2. (I) →\rightarrow P.
  3. (II) f2=−10f_2 = -10: 1v=115−110=−130\dfrac{1}{v} = \dfrac{1}{15} - \dfrac{1}{10} = -\dfrac{1}{30}, v=−30v = -30 cm: 30 cm left of lens 2. (II) →\rightarrow R.
  4. (III) f2=−20f_2 = -20: 1v=115−120=160\dfrac{1}{v} = \dfrac{1}{15} - \dfrac{1}{20} = \dfrac{1}{60}, v=60v = 60 cm right of lens 2. (III) →\rightarrow Q.
  5. (IV) f1=−20f_1 = -20, u=−20u = -20: 1v=−120−120\dfrac{1}{v} = -\dfrac{1}{20} - \dfrac{1}{20}, v=−10v = -10 cm (10 cm left of lens 1, so 15 cm left of lens 2). Lens 2: u2=−15u_2 = -15, 1v=110−115=130\dfrac{1}{v} = \dfrac{1}{10} - \dfrac{1}{15} = \dfrac{1}{30}, v=30v = 30 cm right of lens 2. (IV) →\rightarrow T.
AnswerAnswer: (A) (I) →\rightarrow P; (II) →\rightarrow R; (III) →\rightarrow Q; (IV) →\rightarrow T
Ask about this question

Chemistry, Section 1: 8 questions, answer is a numerical value (truncate or round off to two decimal places): +3 if correct, 0 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Thermodynamics (bomb calorimetry) · +3
2 mol of Hg(g)\mathrm{Hg}(g) is combusted in a fixed volume bomb calorimeter with excess of O2\mathrm{O_2} at 298 K and 1 atm into HgO(s)\mathrm{HgO}(s). During the reaction, temperature increases from 298.0 K to 312.8 K. If heat capacity of the bomb calorimeter and enthalpy of formation of Hg(g)\mathrm{Hg}(g) are 20.00 kJ K−120.00\ \text{kJ K}^{-1} and 61.32 kJ mol−161.32\ \text{kJ mol}^{-1} at 298 K, respectively, the calculated standard molar enthalpy of formation of HgO(s)\mathrm{HgO}(s) at 298 K is X kJ mol−1\text{kJ mol}^{-1}. The value of ∣X∣|X| is ______. [Given: Gas constant R=8.3 J K−1 mol−1R = 8.3\ \text{J K}^{-1}\ \text{mol}^{-1}]

Tests: Turn a bomb-calorimeter reading into ΔU, then ΔH, then an enthalpy of formation with Hess's law.

Show solution
  1. Reaction in the bomb: 2Hg(g)+O2(g)→2HgO(s)\mathrm{2Hg(g) + O_2(g) \rightarrow 2HgO(s)}. Heat released at constant volume =C ΔT=20.00×(312.8−298.0)=20.00×14.8=296= C\,\Delta T = 20.00 \times (312.8 - 298.0) = 20.00 \times 14.8 = 296 kJ, so ΔU=−296\Delta U = -296 kJ for 2 mol.

    Why: A bomb calorimeter works at fixed volume, so the heat it measures is the change in internal energy.

  2. Gas moles change by Δng=0−(2+1)=−3\Delta n_g = 0 - (2 + 1) = -3. Then ΔH=ΔU+ΔngRT=−296+(−3)(8.3×10−3)(298)=−296−7.42=−303.42\Delta H = \Delta U + \Delta n_g RT = -296 + (-3)(8.3 \times 10^{-3})(298) = -296 - 7.42 = -303.42 kJ.
  3. Hess's law on the reaction: ΔH=2ΔfH(HgO)−2ΔfH(Hg,g)−0\Delta H = 2\Delta_f H(\mathrm{HgO}) - 2\Delta_f H(\mathrm{Hg,g}) - 0, because O2\mathrm{O_2} is an element in its standard state.
  4. 2ΔfH(HgO)=−303.42+2(61.32)=−180.782\Delta_f H(\mathrm{HgO}) = -303.42 + 2(61.32) = -180.78 kJ, so ΔfH(HgO)=−90.39 kJ mol−1\Delta_f H(\mathrm{HgO}) = -90.39\ \text{kJ mol}^{-1}.

    Why: Hg(g) is not the standard state of mercury (liquid), so its own enthalpy of formation must be subtracted.

  5. X=−90.39X = -90.39, so ∣X∣=90.39|X| = 90.39.
AnswerAnswer: 90.39
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Electrochemistry · +3
The reduction potential (E0E^0, in V) of MnO4−(aq)/Mn(s)\mathrm{MnO_4^-(aq)/Mn(s)} is ______. [Given: E(MnO4−(aq)/MnO2(s))0=1.68E^0_{(\mathrm{MnO_4^-(aq)/MnO_2(s)})} = 1.68 V; E(MnO2(s)/Mn2+(aq))0=1.21E^0_{(\mathrm{MnO_2(s)/Mn^{2+}(aq)})} = 1.21 V; E(Mn2+(aq)/Mn(s))0=−1.03E^0_{(\mathrm{Mn^{2+}(aq)/Mn(s)})} = -1.03 V]

Tests: Combine reduction potentials of successive half-reactions through ΔG° = −nFE°.

Show solution
  1. Electrons in each step: MnO4−\mathrm{MnO_4^-} (+7) →MnO2\rightarrow \mathrm{MnO_2} (+4): n1=3n_1 = 3; MnO2\mathrm{MnO_2} (+4) →Mn2+\rightarrow \mathrm{Mn^{2+}}: n2=2n_2 = 2; Mn2+→Mn\mathrm{Mn^{2+}} \rightarrow \mathrm{Mn} (0): n3=2n_3 = 2. Overall n=7n = 7.
  2. Potentials do not add; free energies do: ΔG0=−nFE0\Delta G^0 = -nFE^0, so 7E0=n1E1+n2E2+n3E37E^0 = n_1E_1 + n_2E_2 + n_3E_3.

    Why: E° is intensive, ΔG° is extensive and additive.

  3. 7E0=3(1.68)+2(1.21)+2(−1.03)=5.04+2.42−2.06=5.407E^0 = 3(1.68) + 2(1.21) + 2(-1.03) = 5.04 + 2.42 - 2.06 = 5.40.
  4. E0=5.40/7=0.771E^0 = 5.40/7 = 0.771 V ≈0.77\approx 0.77 V.
AnswerAnswer: 0.77 V
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Ionic equilibrium (buffers) · +3
A solution is prepared by mixing 0.01 mol each of H2CO3\mathrm{H_2CO_3}, NaHCO3\mathrm{NaHCO_3}, Na2CO3\mathrm{Na_2CO_3}, and NaOH in 100 mL of water. ppH of the resulting solution is ______. [Given: pKa1pK_{a1} and pKa2pK_{a2} of H2CO3\mathrm{H_2CO_3} are 6.37 and 10.32, respectively; log⁡2=0.30\log 2 = 0.30]

Tests: Neutralise first, then recognise which buffer pair is left and use the matching pKa.

Show solution
  1. The strong base reacts first with the strongest acid: H2CO3+NaOH→NaHCO3+H2O\mathrm{H_2CO_3 + NaOH \rightarrow NaHCO_3 + H_2O}. 0.01 mol each, so both are used up and 0.01 mol NaHCO3\mathrm{NaHCO_3} forms.
  2. Left in solution: HCO3−\mathrm{HCO_3^-} = 0.01 + 0.01 = 0.02 mol and CO32−\mathrm{CO_3^{2-}} = 0.01 mol, in the same 100 mL.
  3. This is a HCO3−/CO32−\mathrm{HCO_3^-/CO_3^{2-}} buffer, governed by pKa2pK_{a2}: pH=pKa2+log⁡[CO32−][HCO3−]=10.32+log⁡0.010.02\text{pH} = pK_{a2} + \log\dfrac{[\mathrm{CO_3^{2-}}]}{[\mathrm{HCO_3^-}]} = 10.32 + \log\dfrac{0.01}{0.02}.

    Why: The volume cancels in the ratio, so moles can be used directly.

  4. pH=10.32−log⁡2=10.32−0.30=10.02\text{pH} = 10.32 - \log 2 = 10.32 - 0.30 = 10.02.
AnswerAnswer: 10.02
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Stoichiometry (redox, iodometry) · +3
The treatment of an aqueous solution of 3.74 g of Cu(NO3)2\mathrm{Cu(NO_3)_2} with excess KI results in a brown solution along with the formation of a precipitate. Passing H2S\mathrm{H_2S} through this brown solution gives another precipitate X. The amount of X (in g) is ______. [Given: Atomic mass of H = 1, N = 14, O = 16, S = 32, K = 39, Cu = 63, I = 127]

Tests: Follow Cu²⁺ → I₂ → S through two redox steps using mole ratios.

Show solution
  1. Molar mass of Cu(NO3)2=63+2(14+48)=187\mathrm{Cu(NO_3)_2} = 63 + 2(14 + 48) = 187, so moles =3.74/187=0.02= 3.74/187 = 0.02 mol.
  2. 2Cu2++4I−→2CuI↓+I2\mathrm{2Cu^{2+} + 4I^- \rightarrow 2CuI\downarrow + I_2}: the white precipitate is CuI and the brown solution is I2\mathrm{I_2} (as I3−\mathrm{I_3^-}). I2\mathrm{I_2} formed =0.02/2=0.01= 0.02/2 = 0.01 mol.
  3. H2S\mathrm{H_2S} reduces iodine: H2S+I2→2HI+S↓\mathrm{H_2S + I_2 \rightarrow 2HI + S\downarrow}. So X is sulfur, 0.01 mol.
  4. Mass of X =0.01×32=0.32= 0.01 \times 32 = 0.32 g.
AnswerAnswer: 0.32 g
Ask about this question
Q5

Chemistry, Question 5 (3 marks)

p-Block elements (phosphorus) · +3
Dissolving 1.24 g of white phosphorous in boiling NaOH solution in an inert atmosphere gives a gas Q. The amount of CuSO4\mathrm{CuSO_4} (in g) required to completely consume the gas Q is ______. [Given: Atomic mass of H = 1, O = 16, Na = 23, P = 31, S = 32, Cu = 63]

Tests: Identify PH₃ from P₄ in alkali and use its reaction with CuSO₄ to find the mass needed.

Show solution
  1. White phosphorus disproportionates in hot alkali: P4+3NaOH+3H2O→PH3↑+3NaH2PO2\mathrm{P_4 + 3NaOH + 3H_2O \rightarrow PH_3\uparrow + 3NaH_2PO_2}. Gas Q is phosphine.
  2. Moles of P4=1.24/124=0.01\mathrm{P_4} = 1.24/124 = 0.01 mol, so PH3\mathrm{PH_3} = 0.01 mol.
  3. Phosphine is absorbed by copper sulfate as copper phosphide: 3CuSO4+2PH3→Cu3P2+3H2SO4\mathrm{3CuSO_4 + 2PH_3 \rightarrow Cu_3P_2 + 3H_2SO_4}. CuSO4\mathrm{CuSO_4} needed =32(0.01)=0.015= \tfrac{3}{2}(0.01) = 0.015 mol.
  4. Molar mass of CuSO4=63+32+64=159\mathrm{CuSO_4} = 63 + 32 + 64 = 159. Mass =0.015×159=2.385= 0.015 \times 159 = 2.385 g.
  5. The paper asks to truncate or round off to two decimals: truncating gives 2.38, rounding gives 2.39, and both are correct answers.

    Why: The instructions allow either, so the third decimal 5 does not make one of them wrong.

AnswerAnswer: 2.38 g (2.385 g; 2.39 by rounding is equally correct)
Ask about this question
Q6

Chemistry, Question 6 (3 marks)

Organic chemistry (Carius method) · +3
Consider the following reaction. (The figure shows 4-bromobenzyl alcohol, a benzene ring carrying CH2OH\mathrm{CH_2OH} and, para to it, Br, treated with red phosphorous and Br2\mathrm{Br_2} to give R (major product).) On estimation of bromine in 1.00 g of R using Carius method, the amount of AgBr formed (in g) is ______. [Given: Atomic mass of H = 1, C = 12, O = 16, P = 31, Br = 80, Ag = 108]

Tests: Identify the product of red P / Br₂ on an alcohol, then count bromine atoms for the Carius estimate.

Show solution
  1. Red phosphorus and bromine make PBr3\mathrm{PBr_3}, which converts the alcohol into an alkyl bromide: BrC6H4CH2OH→BrC6H4CH2Br\mathrm{BrC_6H_4CH_2OH \rightarrow BrC_6H_4CH_2Br}. The aryl Br is untouched.

    Why: There is no alpha-H next to a COOH here, so it is not an HVZ reaction; the OH is simply replaced by Br.

  2. R = 4-bromobenzyl bromide, C7H6Br2\mathrm{C_7H_6Br_2}: molar mass =84+6+160=250= 84 + 6 + 160 = 250.
  3. Moles of R in 1.00 g =1/250=0.004= 1/250 = 0.004 mol. Each R has 2 Br, so AgBr formed =0.008= 0.008 mol (Carius converts all Br, ring and side chain, to AgBr).
  4. Mass of AgBr =0.008×188=1.504= 0.008 \times 188 = 1.504 g ≈1.50\approx 1.50 g.
AnswerAnswer: 1.50 g
Ask about this question
Q7

Chemistry, Question 7 (3 marks)

Phenols (Dow process, picric acid) · +3
The weight percentage of hydrogen in Q, formed in the following reaction sequence, is ______. (The figure shows chlorobenzene treated with 1. NaOH, 623 K, 300 atm; 2. conc. H2SO4\mathrm{H_2SO_4} and then conc. HNO3\mathrm{HNO_3}, giving Q (major product).) [Given: Atomic mass of H = 1, C = 12, N = 14, O = 16, S = 32, Cl = 35]

Tests: Recognise the Dow process and the sulfonation–nitration route to picric acid.

Show solution
  1. Step 1 (Dow process): chlorobenzene with NaOH at 623 K and 300 atm gives sodium phenoxide; the acid in step 2 frees phenol.
  2. Step 2: conc. H2SO4\mathrm{H_2SO_4} sulfonates phenol (2,4-disulfonic acid) and conc. HNO3\mathrm{HNO_3} then replaces the sulfonic groups and nitrates fully, giving picric acid, 2,4,6-trinitrophenol.

    Why: Sulfonation first protects the ring from oxidation by conc. HNO3 and gives a better yield of picric acid.

  3. Q = C6H2(NO2)3OH=C6H3N3O7\mathrm{C_6H_2(NO_2)_3OH} = \mathrm{C_6H_3N_3O_7}: molar mass =72+3+42+112=229= 72 + 3 + 42 + 112 = 229.
  4. % H =3229×100=1.31%= \dfrac{3}{229} \times 100 = 1.31\%.
AnswerAnswer: 1.31
Ask about this question
Q8

Chemistry, Question 8 (3 marks)

Hydrocarbons and phenols (multistep yield) · +3
If the reaction sequence given below is carried out with 15 moles of acetylene, the amount of the product D formed (in g) is ______. (The scheme: HC≡CH\mathrm{HC{\equiv}CH} passed through an iron tube (red hot) gives A (80%); A with CH3CH2CH2Cl\mathrm{CH_3CH_2CH_2Cl} and AlCl3\mathrm{AlCl_3} gives B (50%); B with 1. O2\mathrm{O_2}, 2. H3O+\mathrm{H_3O^+}, with loss of CH3COCH3\mathrm{CH_3COCH_3}, gives C (50%); C with CH3COCl\mathrm{CH_3COCl} and pyridine gives D (100%).) The yields of A, B, C and D are given in parentheses. [Given: Atomic mass of H = 1, C = 12, O = 16, Cl = 35]

Tests: Identify each product in a classic benzene → cumene → phenol → ester route and chain the yields.

Show solution
  1. Cyclic trimerisation: 3C2H2→C6H6\mathrm{3C_2H_2 \rightarrow C_6H_6}. 15 mol acetylene gives at most 5 mol benzene; at 80%, A = 4 mol benzene.
  2. Friedel–Crafts alkylation with 1-chloropropane: the primary carbocation rearranges to the isopropyl cation, so B is cumene (isopropylbenzene). At 50%: 2 mol.

    Why: A 1,2-hydride shift turns CH3CH2CH2+ into the more stable (CH3)2CH+.

  3. Cumene process: O2\mathrm{O_2} gives cumene hydroperoxide, and acid splits it into phenol and acetone. C = phenol, at 50%: 1 mol.
  4. Phenol + CH3COCl\mathrm{CH_3COCl} / pyridine gives phenyl acetate CH3COOC6H5\mathrm{CH_3COOC_6H_5} (C8H8O2\mathrm{C_8H_8O_2}, M=96+8+32=136M = 96 + 8 + 32 = 136). At 100%: 1 mol D.
  5. Mass of D =1×136=136= 1 \times 136 = 136 g.
AnswerAnswer: 136 g
Ask about this question

Chemistry, Section 2: 6 questions, one or more options correct: +4 if all the correct options are chosen; +3 if all four are correct and only three are chosen; +2 if three or more are correct and only two are chosen, both correct; +1 if two or more are correct and only one is chosen, a correct one; 0 if unanswered; −2 in all other cases

Q9

Chemistry, Question 9 (4 marks)

Chemical bonding (molecular orbitals) · +4 / −2
For diatomic molecules, the correct statement(s) about the molecular orbitals formed by the overlap of two 2pz2p_z orbitals is(are)
  1. (A)σ\sigma orbital has a total of two nodal planes.
  2. (B)σ∗\sigma^* orbital has one node in the xzxz-plane containing the molecular axis.
  3. (C)π\pi orbital has one node in the plane which is perpendicular to the molecular axis and goes through the center of the molecule.
  4. (D)π∗\pi^* orbital has one node in the xyxy-plane containing the molecular axis.

Tests: Locate the nodes of σ, σ, π and π orbitals built from p orbitals.

Show solution
  1. End-on overlap of two 2pz2p_z orbitals (axis along zz) gives σ\sigma and σ∗\sigma^*; side-on overlap (axis in the xyxy-plane) gives π\pi and π∗\pi^*. Each MO keeps the nodes of its parent orbitals and the antibonding one adds a node between the nuclei.
  2. (A) True. Each parent 2pz2p_z has a nodal plane through its nucleus, perpendicular to the axis. The bonding σ\sigma MO keeps two such nodes, one behind each nucleus (small back lobes of opposite sign beyond each atom), and has none containing the axis.

    Why: Strictly these two nodes are slightly curved surfaces near each nucleus; the question counts them as the two nodal planes.

  3. (B) False. A σ∗\sigma^* orbital is cylindrically symmetric about the axis, so no plane containing the axis (such as xzxz) is a node. Its extra node is the plane perpendicular to the axis at the centre.
  4. (C) False. The bonding π\pi orbital has no node between the nuclei; its node is the plane containing the axis (xyxy, the nodal plane of the pzp_z orbitals). A node perpendicular to the axis through the centre belongs to π∗\pi^*.
  5. (D) True. For side-on overlap of pzp_z orbitals the axis lies in the xyxy-plane, and the pzp_z nodal plane (xyxy) survives in both π\pi and π∗\pi^*. So π∗\pi^* has a node in the xyxy-plane containing the axis (plus one perpendicular to it).
AnswerAnswer: (A), (D)
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Surface chemistry (adsorption) · +4 / −2
The correct option(s) related to adsorption processes is(are)
  1. (A)Chemisorption results in a unimolecular layer.
  2. (B)The enthalpy change during physisorption is in the range of 100 to 140 kJ mol−1\text{kJ mol}^{-1}.
  3. (C)Chemisorption is an endothermic process.
  4. (D)Lowering the temperature favors physisorption processes.

Tests: Compare physisorption and chemisorption: layers, enthalpy and the effect of temperature.

Show solution
  1. (A) True. Chemisorption forms chemical bonds with surface sites, so once every site is used no further layer can bond: a monolayer.
  2. (B) False. Physisorption involves weak van der Waals forces; its enthalpy is about 20 to 40 kJ mol−1\text{kJ mol}^{-1}. Values of 80 to 240 kJ mol−1\text{kJ mol}^{-1} are typical of chemisorption.
  3. (C) False. Adsorption lowers entropy (ΔS<0\Delta S < 0), so for it to be spontaneous (ΔG<0\Delta G < 0) it must be exothermic; chemisorption releases heat, like bond formation.
  4. (D) True. Physisorption is exothermic and needs no activation energy, so by Le Chatelier's principle it increases as temperature falls.
AnswerAnswer: (A), (D)
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Metallurgy (aluminium) · +4 / −2
The electrochemical extraction of aluminum from bauxite ore involves
  1. (A)the reaction of Al2O3\mathrm{Al_2O_3} with coke (C) at a temperature > 2500 °C.
  2. (B)the neutralization of aluminate solution by passing CO2\mathrm{CO_2} gas to precipitate hydrated alumina (Al2O3⋅3H2O\mathrm{Al_2O_3 \cdot 3H_2O}).
  3. (C)the dissolution of Al2O3\mathrm{Al_2O_3} in hot aqueous NaOH.
  4. (D)the electrolysis of Al2O3\mathrm{Al_2O_3} mixed with Na3AlF6\mathrm{Na_3AlF_6} to give Al and CO2\mathrm{CO_2}.

Tests: Lay out the Bayer and Hall–Héroult steps of aluminium extraction.

Show solution
  1. Aluminium is made in two stages: the Bayer process purifies bauxite to alumina, and the Hall–Héroult cell electrolyses the alumina.
  2. (A) False. Aluminium is too electropositive to be reduced by carbon in practice; heating alumina with coke at very high temperature gives aluminium carbide, not the metal, and it is not a step of the process.
  3. (C) True. Bayer leaching: Al2O3+2NaOH+3H2O→2Na[Al(OH)4]\mathrm{Al_2O_3 + 2NaOH + 3H_2O \rightarrow 2Na[Al(OH)_4]}; iron oxide impurities stay undissolved.
  4. (B) True. CO2\mathrm{CO_2} neutralises the aluminate: 2Na[Al(OH)4]+CO2→Al2O3⋅3H2O↓+Na2CO3+H2O\mathrm{2Na[Al(OH)_4] + CO_2 \rightarrow Al_2O_3 \cdot 3H_2O\downarrow + Na_2CO_3 + H_2O}; the hydrate is then calcined to pure Al2O3\mathrm{Al_2O_3}.
  5. (D) True. Alumina dissolved in molten cryolite Na3AlF6\mathrm{Na_3AlF_6} is electrolysed: Al deposits at the cathode, and the oxygen at the carbon anode burns it to CO2\mathrm{CO_2} (and some CO): 2Al2O3+3C→4Al+3CO2\mathrm{2Al_2O_3 + 3C \rightarrow 4Al + 3CO_2}.

    Why: Cryolite lowers the melting point and raises the conductivity of the electrolyte.

AnswerAnswer: (B), (C), (D)
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

p-Block elements (oxides of nitrogen) · +4 / −2
The treatment of galena with HNO3\mathrm{HNO_3} produces a gas that is
  1. (A)paramagnetic
  2. (B)bent in geometry
  3. (C)an acidic oxide
  4. (D)colorless

Tests: Identify the gas from a metal sulfide and nitric acid and recall the properties of NO.

Show solution
  1. Galena is PbS. Nitric acid oxidises the sulfide and is itself reduced to nitric oxide: 3PbS+8HNO3→3Pb(NO3)2+3S+2NO↑+4H2O\mathrm{3PbS + 8HNO_3 \rightarrow 3Pb(NO_3)_2 + 3S + 2NO\uparrow + 4H_2O}. The gas is NO.
  2. (A) True. NO has 15 electrons, an odd number, with one unpaired electron in a π∗\pi^* orbital: paramagnetic.
  3. (B) False. NO is diatomic, so it is linear; "bent" would describe NO2\mathrm{NO_2}.
  4. (C) False. NO is a neutral oxide (like N2O\mathrm{N_2O} and CO); it does not form an acid with water.
  5. (D) True. NO is a colourless gas; it turns brown only when it meets air and forms NO2\mathrm{NO_2}.
AnswerAnswer: (A), (D)
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Amines and carboxylic acids (HVZ, Gabriel synthesis) · +4 / −2
Considering the reaction sequence given below, the correct statement(s) is(are) (The scheme: propanoic acid CH3CH2COOH\mathrm{CH_3CH_2COOH} with 1. Br2\mathrm{Br_2}, red phosphorous; 2. H2O\mathrm{H_2O} gives P; P with 1. potassium phthalimide; 2. NaOH; 3. H3O+\mathrm{H_3O^+} gives Q + phthalic acid (benzene-1,2-dicarboxylic acid).)
  1. (A)P can be reduced to a primary alcohol using NaBH4\mathrm{NaBH_4}.
  2. (B)Treating P with conc. NH4OH\mathrm{NH_4OH} solution followed by acidification gives Q.
  3. (C)Treating Q with a solution of NaNO2\mathrm{NaNO_2} in aq. HCl liberates N2\mathrm{N_2}.
  4. (D)P is more acidic than CH3CH2COOH\mathrm{CH_3CH_2COOH}.

Tests: Follow HVZ and Gabriel synthesis to an amino acid and test the reactions of each product.

Show solution
  1. Hell–Volhard–Zelinsky bromination at the α\alpha-carbon: P = 2-bromopropanoic acid, CH3CHBrCOOH\mathrm{CH_3CHBrCOOH}.
  2. Gabriel synthesis: phthalimide anion displaces Br, and hydrolysis releases the amine and phthalic acid. Q = 2-aminopropanoic acid (alanine), CH3CH(NH2)COOH\mathrm{CH_3CH(NH_2)COOH}.
  3. (A) False. NaBH4\mathrm{NaBH_4} does not reduce carboxylic acids; LiAlH4\mathrm{LiAlH_4} or B2H6\mathrm{B_2H_6} would be needed.
  4. (B) True. Excess ammonia substitutes the α\alpha-bromine: CH3CHBrCOOH+NH3→CH3CH(NH2)COO−NH4+\mathrm{CH_3CHBrCOOH + NH_3 \rightarrow CH_3CH(NH_2)COO^-NH_4^+}; acidification gives alanine, the same Q.
  5. (C) True. Q is a primary aliphatic amine; with HNO2\mathrm{HNO_2} it forms an unstable diazonium ion that loses N2\mathrm{N_2} (giving lactic acid).
  6. (D) True. The −I-I effect of the α\alpha-Br stabilises the carboxylate, so 2-bromopropanoic acid is stronger than propanoic acid.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q14

Chemistry, Question 14 (4 marks)

Diazonium salts (aromatic amines) · +4 / −2
Considering the following reaction sequence, (The scheme: p-nitrotoluene (4-methylnitrobenzene) →P\xrightarrow{\textbf{P}} Q →R\xrightarrow{\textbf{R}} S →H2O\xrightarrow{\mathrm{H_2O}} T, and S →U\xrightarrow{\textbf{U}} benzoic acid C6H5COOH\mathrm{C_6H_5COOH}.) the correct option(s) is(are)
  1. (A)P = H2/Pd\mathrm{H_2/Pd}, ethanol; R = NaNO2/HCl\mathrm{NaNO_2/HCl}; U = 1. H3PO2\mathrm{H_3PO_2}, 2. KMnO4\mathrm{KMnO_4}-KOH, heat
  2. (B)P = Sn/HCl; R = HNO2\mathrm{HNO_2}; S = 4-methylbenzenediazonium chloride (CH3C6H4N2+Cl−\mathrm{CH_3C_6H_4N_2^+Cl^-}, para)
  3. (C)S = 4-methylbenzenediazonium chloride (CH3C6H4N2+Cl−\mathrm{CH_3C_6H_4N_2^+Cl^-}, para); T = p-cresol (4-methylphenol); U = 1. CH3CH2OH\mathrm{CH_3CH_2OH}, 2. KMnO4\mathrm{KMnO_4}-KOH, heat
  4. (D)Q = 4-nitrobenzoic acid (HOOC−C6H4−NO2\mathrm{HOOC{-}C_6H_4{-}NO_2}, para); R = H2/Pd\mathrm{H_2/Pd}, ethanol; T = p-cresol (4-methylphenol)

Tests: Use the nitro → amine → diazonium route and the reagents that replace N₂⁺ by OH or H.

Show solution
  1. Route: reduce NO2\mathrm{NO_2} to NH2\mathrm{NH_2} (Q = p-toluidine), diazotise (S = p-toluenediazonium chloride), warm with water (T = p-cresol). To reach benzoic acid, U must remove the N2+\mathrm{N_2^+} group (replace it by H) and oxidise CH3\mathrm{CH_3} to COOH.
  2. (A) True. H2/Pd\mathrm{H_2/Pd} reduces the nitro group to p-toluidine; NaNO2/HCl\mathrm{NaNO_2/HCl} at 0–5 °C diazotises it; H3PO2\mathrm{H_3PO_2} replaces N2+\mathrm{N_2^+} by H (toluene) and hot alkaline KMnO4\mathrm{KMnO_4} oxidises CH3\mathrm{CH_3} to benzoate, giving benzoic acid on acidification.
  3. (B) True. Sn/HCl also reduces NO2\mathrm{NO_2} to NH2\mathrm{NH_2}, and HNO2\mathrm{HNO_2} (from NaNO2\mathrm{NaNO_2} + HCl) gives the p-methylbenzenediazonium chloride shown as S.
  4. (C) True. S as shown is right; warming the diazonium salt with water gives p-cresol (T); ethanol reduces ArN2+\mathrm{ArN_2^+} to ArH (toluene, with acetaldehyde and N2\mathrm{N_2}), and KMnO4\mathrm{KMnO_4}-KOH then gives benzoic acid.
  5. (D) False. Q cannot be 4-nitrobenzoic acid: no oxidant acts in the first step, and with Q as an acid, H2/Pd\mathrm{H_2/Pd} as R would only give an amine (no diazonium salt), so T could not be p-cresol and the methyl group needed for that product would already be gone.
AnswerAnswer: (A), (B), (C)
Ask about this question

Chemistry, Section 3: 4 matching List-I / List-II sets, only one option correct: +3 if correct, 0 if unanswered, −1 in all other cases

Q15

Chemistry, Question 15 (3 marks)

Chemical kinetics · +3 / −1
Match the rate expressions in LIST-I for the decomposition of X with the corresponding profiles provided in LIST-II. XsX_s and kk are constants having appropriate units.
LIST-ILIST-II
(I) rate=k[X]Xs+[X]\text{rate} = \dfrac{k[X]}{X_s + [X]} under all possible initial concentrations of X(P) graph of half life (t1/2t_{1/2}) against initial concentration of X: a straight line rising from a positive intercept
(II) rate=k[X]Xs+[X]\text{rate} = \dfrac{k[X]}{X_s + [X]} where initial concentrations of X are much less than XsX_s(Q) graph of half life (t1/2t_{1/2}) against initial concentration of X: a horizontal line
(III) rate=k[X]Xs+[X]\text{rate} = \dfrac{k[X]}{X_s + [X]} where initial concentrations of X are much higher than XsX_s(R) graph of rate against initial concentration of X: rising from the origin, curving and levelling off to a constant value
(IV) rate=k[X]2Xs+[X]\text{rate} = \dfrac{k[X]^2}{X_s + [X]} where initial concentration of X is much higher than XsX_s(S) graph of [X] against time: a straight line falling from a positive intercept
(T) graph of ln[X] against time: a straight line falling from a positive intercept
  1. (A)I →\rightarrow P; II →\rightarrow Q; III →\rightarrow S; IV →\rightarrow T
  2. (B)I →\rightarrow R; II →\rightarrow S; III →\rightarrow S; IV →\rightarrow T
  3. (C)I →\rightarrow P; II →\rightarrow Q; III →\rightarrow Q; IV →\rightarrow R
  4. (D)I →\rightarrow R; II →\rightarrow S; III →\rightarrow Q; IV →\rightarrow R

Tests: Reduce a saturation (Michaelis–Menten type) rate law to zero or first order in the limits and match the plots.

Show solution
  1. (I) Full expression. Integrating −d[X]dt=k[X]Xs+[X]-\dfrac{d[X]}{dt} = \dfrac{k[X]}{X_s + [X]} gives Xsln⁡[X]0[X]+([X]0−[X])=ktX_s \ln\dfrac{[X]_0}{[X]} + ([X]_0 - [X]) = kt. Put [X]=[X]0/2[X] = [X]_0/2: t1/2=Xsln⁡2k+[X]02kt_{1/2} = \dfrac{X_s \ln 2}{k} + \dfrac{[X]_0}{2k}, a straight line with positive intercept: P. (Rate against [X]0[X]_0 also saturates, R, but no option pairs I with R correctly.)
  2. (II) [X]≪Xs[X] \ll X_s: rate ≈kXs[X]\approx \dfrac{k}{X_s}[X], first order. t1/2=Xsln⁡2kt_{1/2} = \dfrac{X_s \ln 2}{k}, independent of [X]0[X]_0: Q (ln[X] against t is also linear, T).
  3. (III) [X]≫Xs[X] \gg X_s: rate ≈k\approx k, zero order. [X]=[X]0−kt[X] = [X]_0 - kt falls linearly with time: S.
  4. (IV) [X]≫Xs[X] \gg X_s: rate ≈k[X]2[X]=k[X]\approx \dfrac{k[X]^2}{[X]} = k[X], first order. ln⁡[X]=ln⁡[X]0−kt\ln[X] = \ln[X]_0 - kt: T (half life constant, Q, also fits).
  5. Only option (A), I → P, II → Q, III → S, IV → T, has every pair correct. (B) and (D) put II with S (II is first order, not zero order); (C) puts III with Q and IV with R.
AnswerAnswer: (A) I → P; II → Q; III → S; IV → T
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

s-Block elements and hydrogen peroxide · +3 / −1
LIST-I contains compounds and LIST-II contains reactions. Match each compound in LIST-I with its formation reaction(s) in LIST-II, and choose the correct option
LIST-ILIST-II
(I) H2O2\mathrm{H_2O_2}(P) Mg(HCO3)2+Ca(OH)2→\mathrm{Mg(HCO_3)_2 + Ca(OH)_2 \rightarrow}
(II) Mg(OH)2\mathrm{Mg(OH)_2}(Q) BaO2+H2SO4→\mathrm{BaO_2 + H_2SO_4 \rightarrow}
(III) BaCl2\mathrm{BaCl_2}(R) Ca(OH)2+MgCl2→\mathrm{Ca(OH)_2 + MgCl_2 \rightarrow}
(IV) CaCO3\mathrm{CaCO_3}(S) BaO2+HCl→\mathrm{BaO_2 + HCl \rightarrow}
(T) Ca(HCO3)2+Ca(OH)2→\mathrm{Ca(HCO_3)_2 + Ca(OH)_2 \rightarrow}
  1. (A)I →\rightarrow Q; II →\rightarrow P; III →\rightarrow S; IV →\rightarrow R
  2. (B)I →\rightarrow T; II →\rightarrow P; III →\rightarrow Q; IV →\rightarrow R
  3. (C)I →\rightarrow T; II →\rightarrow R; III →\rightarrow Q; IV →\rightarrow P
  4. (D)I →\rightarrow Q; II →\rightarrow R; III →\rightarrow S; IV →\rightarrow P

Tests: Write the products of peroxide-acid and lime-softening reactions to see what each one forms.

Show solution
  1. Write each reaction. (P) Clark's method: Mg(HCO3)2+2Ca(OH)2→Mg(OH)2↓+2CaCO3↓+2H2O\mathrm{Mg(HCO_3)_2 + 2Ca(OH)_2 \rightarrow Mg(OH)_2\downarrow + 2CaCO_3\downarrow + 2H_2O}: forms Mg(OH)2\mathrm{Mg(OH)_2} and CaCO3\mathrm{CaCO_3}.
  2. (Q) BaO2+H2SO4→BaSO4↓+H2O2\mathrm{BaO_2 + H_2SO_4 \rightarrow BaSO_4\downarrow + H_2O_2}: forms H2O2\mathrm{H_2O_2}. (S) BaO2+2HCl→BaCl2+H2O2\mathrm{BaO_2 + 2HCl \rightarrow BaCl_2 + H_2O_2}: forms BaCl2\mathrm{BaCl_2} (and H2O2\mathrm{H_2O_2}).

    Why: A peroxide with acid gives H2O2 and the barium salt of that acid.

  3. (R) Ca(OH)2+MgCl2→Mg(OH)2↓+CaCl2\mathrm{Ca(OH)_2 + MgCl_2 \rightarrow Mg(OH)_2\downarrow + CaCl_2}: forms Mg(OH)2\mathrm{Mg(OH)_2}. (T) Ca(HCO3)2+Ca(OH)2→2CaCO3↓+2H2O\mathrm{Ca(HCO_3)_2 + Ca(OH)_2 \rightarrow 2CaCO_3\downarrow + 2H_2O}: forms CaCO3\mathrm{CaCO_3}.
  4. So I (H2O2\mathrm{H_2O_2}): Q, S; II (Mg(OH)2\mathrm{Mg(OH)_2}): P, R; III (BaCl2\mathrm{BaCl_2}): S; IV (CaCO3\mathrm{CaCO_3}): P, T.
  5. Check the options: (A) has IV → R, but R gives no CaCO3\mathrm{CaCO_3}; (B) and (C) have I → T, but T gives no H2O2\mathrm{H_2O_2}. Only (D), I → Q, II → R, III → S, IV → P, has every pair correct.
AnswerAnswer: (D) I → Q; II → R; III → S; IV → P
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

Coordination compounds (crystal field theory) · +3 / −1
LIST-I contains metal species and LIST-II contains their properties. [Given: Atomic number of Cr = 24, Ru = 44, Fe = 26] Match each metal species in LIST-I with their properties in LIST-II, and choose the correct option
LIST-ILIST-II
(I) [Cr(CN)6]4−\mathrm{[Cr(CN)_6]^{4-}}(P) t2gt_{2g} orbitals contain 4 electrons
(II) [RuCl6]2−\mathrm{[RuCl_6]^{2-}}(Q) μ\mu(spin-only) = 4.9 BM
(III) [Cr(H2O)6]2+\mathrm{[Cr(H_2O)_6]^{2+}}(R) low spin complex ion
(IV) [Fe(H2O)6]2+\mathrm{[Fe(H_2O)_6]^{2+}}(S) metal ion in 4+ oxidation state
(T) d4d^4 species
  1. (A)I →\rightarrow R, T; II →\rightarrow P, S; III →\rightarrow Q, T; IV →\rightarrow P, Q
  2. (B)I →\rightarrow R, S; II →\rightarrow P, T; III →\rightarrow P, Q; IV →\rightarrow Q, T
  3. (C)I →\rightarrow P, R; II →\rightarrow R, S; III →\rightarrow R, T; IV →\rightarrow P, T
  4. (D)I →\rightarrow Q, T; II →\rightarrow S, T; III →\rightarrow P, T; IV →\rightarrow Q, R

Tests: Find the oxidation state, d-count and spin state of each complex and read off t2g filling and spin-only moment.

Show solution
  1. (I) [Cr(CN)6]4−\mathrm{[Cr(CN)_6]^{4-}}: Cr is +2, 3d43d^4. CN−\mathrm{CN^-} is a strong-field ligand, so it is low spin, t2g4eg0t_{2g}^4 e_g^0 (2 unpaired, μ=2.83\mu = 2.83 BM). Properties: P, R, T.
  2. (II) [RuCl6]2−\mathrm{[RuCl_6]^{2-}}: Ru is +4; Ru (Z=44Z = 44) is [Kr]4d75s1[\mathrm{Kr}]4d^7 5s^1, so Ru4+\mathrm{Ru^{4+}} is 4d44d^4. A 4d metal has a large splitting, so even with Cl−\mathrm{Cl^-} it is low spin, t2g4t_{2g}^4. Properties: P, R, S, T.

    Why: 4d and 5d complexes are almost always low spin because Δo is much larger than for 3d.

  3. (III) [Cr(H2O)6]2+\mathrm{[Cr(H_2O)_6]^{2+}}: Cr2+\mathrm{Cr^{2+}} 3d43d^4 with weak-field water: high spin, t2g3eg1t_{2g}^3 e_g^1, 4 unpaired, μ=4×6=24=4.9\mu = \sqrt{4 \times 6} = \sqrt{24} = 4.9 BM. Properties: Q, T (not P: t2gt_{2g} has 3 electrons).
  4. (IV) [Fe(H2O)6]2+\mathrm{[Fe(H_2O)_6]^{2+}}: Fe2+\mathrm{Fe^{2+}} is 3d63d^6 (not d4d^4), high spin with water: t2g4eg2t_{2g}^4 e_g^2, 4 unpaired, μ=4.9\mu = 4.9 BM. Properties: P, Q only (not R, S or T).
  5. Check options: (B) has I → S (Cr is +2, not +4); (C) has III → R ([Cr(H2O)6]2+\mathrm{[Cr(H_2O)_6]^{2+}} is high spin) and IV → T; (D) has I → Q (only 2 unpaired). (A) lists only correct pairs: I → R, T; II → P, S; III → Q, T; IV → P, Q. It omits some true ones (P for I; R, T for II) but contains no wrong one, so it is the answer.
AnswerAnswer: (A) I → R, T; II → P, S; III → Q, T; IV → P, Q
Ask about this question
Q18

Chemistry, Question 18 (3 marks)

Organic qualitative analysis · +3 / −1
Match the compounds in LIST-I with the observations in LIST-II, and choose the correct option.
LIST-ILIST-II
(I) Aniline(P) Sodium fusion extract of the compound on boiling with FeSO4\mathrm{FeSO_4}, followed by acidification with conc. H2SO4\mathrm{H_2SO_4}, gives Prussian blue color.
(II) o-Cresol(Q) Sodium fusion extract of the compound on treatment with sodium nitroprusside gives blood red color.
(III) Cysteine(R) Addition of the compound to a saturated solution of NaHCO3\mathrm{NaHCO_3} results in effervescence.
(IV) Caprolactam(S) The compound reacts with bromine water to give a white precipitate.
(T) Treating the compound with neutral FeCl3\mathrm{FeCl_3} solution produces violet color.
  1. (A)I →\rightarrow P, Q; II →\rightarrow S; III →\rightarrow Q, R; IV →\rightarrow P
  2. (B)I →\rightarrow P; II →\rightarrow R, S; III →\rightarrow R; IV →\rightarrow Q, S
  3. (C)I →\rightarrow Q, S; II →\rightarrow P, T; III →\rightarrow P; IV →\rightarrow S
  4. (D)I →\rightarrow P, S; II →\rightarrow T; III →\rightarrow Q, R; IV →\rightarrow P

Tests: Use Lassaigne's tests and functional-group tests to identify what each compound responds to.

Show solution
  1. (I) Aniline C6H5NH2\mathrm{C_6H_5NH_2}: contains N (Lassaigne's Prussian blue, P); with bromine water gives a white precipitate of 2,4,6-tribromoaniline (S). No S, no COOH, no phenolic OH.
  2. (II) o-Cresol (2-methylphenol): a phenol, so neutral FeCl3\mathrm{FeCl_3} gives a violet colour (T); bromine water also gives a white bromo-cresol precipitate (S). It has no N or S, and phenols are too weak to liberate CO2\mathrm{CO_2} from NaHCO3\mathrm{NaHCO_3} (not R).
  3. (III) Cysteine HSCH2CH(NH2)COOH\mathrm{HSCH_2CH(NH_2)COOH}: the COOH liberates CO2\mathrm{CO_2} from NaHCO3\mathrm{NaHCO_3} (R); it contains sulfur, which is what test Q detects. It also contains N, so it would give P too.

    Why: Strictly nitroprusside gives violet with sulfide; blood red is the Fe3+ thiocyanate colour when N and S are both present. Either way the test is for sulfur, and cysteine is the only compound with S.

  4. (IV) Caprolactam (the cyclic amide of 6-aminohexanoic acid): contains N, so P; it has no S, no acidic COOH and no activated ring.
  5. Check options: (A) has I → Q (aniline has no S); (B) has II → R and IV → Q, S; (C) has I → Q and IV → S. Only (D), I → P, S; II → T; III → Q, R; IV → P, has every pair correct.
AnswerAnswer: (D) I → P, S; II → T; III → Q, R; IV → P
Ask about this question

Questions are quoted from JEE (Advanced) 2022 Paper 1 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.