AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2022 Paper 2: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2022 Paper 2 solved step by step: Mathematics, Physics and Chemistry, with the answer key and the marking of each section. No official answer key is in our sources for this paper, so every final answer is worked out independently and checked against the answer key coaching institutes published after the exam.

JEE (Advanced) 2022 Paper 2: 54 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2022: Paper 1.

Mathematics, Section 1: 8 questions, the answer is a single digit integer from 0 to 9: +3 if only the correct integer is entered, 0 if unanswered, −1 in all other cases

Q1

Mathematics, Question 1 (3 marks)

Trigonometric ratios and identities · +3 / −1
Let α\alpha and β\beta be real numbers such that −π4<β<0<α<π4-\dfrac{\pi}{4} < \beta < 0 < \alpha < \dfrac{\pi}{4}. If sin⁡(α+β)=13\sin(\alpha + \beta) = \dfrac{1}{3} and cos⁡(α−β)=23\cos(\alpha - \beta) = \dfrac{2}{3}, then the greatest integer less than or equal to (sin⁡αcos⁡β+cos⁡βsin⁡α+cos⁡αsin⁡β+sin⁡βcos⁡α)2\left(\dfrac{\sin\alpha}{\cos\beta} + \dfrac{\cos\beta}{\sin\alpha} + \dfrac{\cos\alpha}{\sin\beta} + \dfrac{\sin\beta}{\cos\alpha}\right)^2 is ______.

Tests: Regroup four fractions into two that simplify with cos(α − β), then use sum-to-product formulas.

Show solution
  1. Pair the terms differently: sin⁡αcos⁡β+cos⁡αsin⁡β=sin⁡αsin⁡β+cos⁡αcos⁡βsin⁡βcos⁡β=2cos⁡(α−β)sin⁡2β\dfrac{\sin\alpha}{\cos\beta} + \dfrac{\cos\alpha}{\sin\beta} = \dfrac{\sin\alpha\sin\beta + \cos\alpha\cos\beta}{\sin\beta\cos\beta} = \dfrac{2\cos(\alpha - \beta)}{\sin 2\beta}.

    Why: Pairing across the two fractions makes the numerator a single cosine of α − β.

  2. Likewise cos⁡βsin⁡α+sin⁡βcos⁡α=2cos⁡(α−β)sin⁡2α\dfrac{\cos\beta}{\sin\alpha} + \dfrac{\sin\beta}{\cos\alpha} = \dfrac{2\cos(\alpha - \beta)}{\sin 2\alpha}. So E=2cos⁡(α−β)⋅sin⁡2α+sin⁡2βsin⁡2α sin⁡2βE = 2\cos(\alpha - \beta)\cdot\dfrac{\sin 2\alpha + \sin 2\beta}{\sin 2\alpha\,\sin 2\beta}.
  3. sin⁡2α+sin⁡2β=2sin⁡(α+β)cos⁡(α−β)=2⋅13⋅23=49\sin 2\alpha + \sin 2\beta = 2\sin(\alpha + \beta)\cos(\alpha - \beta) = 2\cdot\dfrac{1}{3}\cdot\dfrac{2}{3} = \dfrac{4}{9}.
  4. sin⁡2α sin⁡2β=12[cos⁡2(α−β)−cos⁡2(α+β)]\sin 2\alpha\,\sin 2\beta = \dfrac{1}{2}\left[\cos 2(\alpha - \beta) - \cos 2(\alpha + \beta)\right] with cos⁡2(α−β)=2⋅49−1=−19\cos 2(\alpha - \beta) = 2\cdot\dfrac{4}{9} - 1 = -\dfrac{1}{9} and cos⁡2(α+β)=1−29=79\cos 2(\alpha + \beta) = 1 - \dfrac{2}{9} = \dfrac{7}{9}, so the product is −49-\dfrac{4}{9}.

    Why: Negative, as it must be: 2α > 0 and 2β < 0.

  5. E=2⋅23⋅4/9−4/9=−43E = 2\cdot\dfrac{2}{3}\cdot\dfrac{4/9}{-4/9} = -\dfrac{4}{3}, so E2=169=1.77…E^2 = \dfrac{16}{9} = 1.77\ldots and the greatest integer is 11.
AnswerAnswer: 1
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Differential equations · +3 / −1
If y(x)y(x) is the solution of the differential equation x dy−(y2−4y) dx=0x\,dy - (y^2 - 4y)\,dx = 0 for x>0x > 0, y(1)=2y(1) = 2, and the slope of the curve y=y(x)y = y(x) is never zero, then the value of 10 y(2)10\,y(\sqrt{2}) is ______.

Tests: Solve a separable equation by partial fractions and use the given condition to remove the modulus.

Show solution
  1. Separate the variables: dyy(y−4)=dxx\dfrac{dy}{y(y - 4)} = \dfrac{dx}{x}, i.e. 14(1y−4−1y)dy=dxx\dfrac{1}{4}\left(\dfrac{1}{y - 4} - \dfrac{1}{y}\right)dy = \dfrac{dx}{x}.
  2. Integrate: 14ln⁡∣y−4y∣=ln⁡x+C\dfrac{1}{4}\ln\left|\dfrac{y - 4}{y}\right| = \ln x + C. At x=1x = 1, y=2y = 2: ∣−22∣=1\left|\dfrac{-2}{2}\right| = 1, so C=0C = 0 and ∣y−4y∣=x4\left|\dfrac{y - 4}{y}\right| = x^4.
  3. The slope y(y−4)x\dfrac{y(y - 4)}{x} is never zero, so yy never reaches 00 or 44; starting at y=2y = 2 it stays in (0,4)(0, 4), where y−4y<0\dfrac{y - 4}{y} < 0. Hence 4−yy=x4\dfrac{4 - y}{y} = x^4, i.e. y=41+x4y = \dfrac{4}{1 + x^4}.

    Why: This is what the 'slope never zero' condition is for: it fixes the sign inside the modulus.

  4. y(2)=41+4=45y(\sqrt{2}) = \dfrac{4}{1 + 4} = \dfrac{4}{5}, so 10 y(2)=810\,y(\sqrt{2}) = 8.
AnswerAnswer: 8
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Definite integration (inverse functions) · +3 / −1
The greatest integer less than or equal to ∫12log⁡2(x3+1) dx+∫1log⁡29(2x−1)13 dx\displaystyle\int_1^2 \log_2(x^3 + 1)\,dx + \int_1^{\log_2 9} (2^x - 1)^{\frac{1}{3}}\,dx is ______.

Tests: Spot that the two integrands are inverse functions and use the area identity instead of integrating.

Show solution
  1. Let f(x)=log⁡2(x3+1)f(x) = \log_2(x^3 + 1) on [1,2][1, 2]. It is increasing, with f(1)=1f(1) = 1 and f(2)=log⁡29f(2) = \log_2 9.
  2. Its inverse: y=log⁡2(x3+1)⇒x=(2y−1)1/3y = \log_2(x^3 + 1) \Rightarrow x = (2^y - 1)^{1/3}. So the second integral is ∫f(1)f(2)f−1(y) dy\displaystyle\int_{f(1)}^{f(2)} f^{-1}(y)\,dy.

    Why: Recognising the second integrand as the inverse of the first is the whole trick.

  3. For an increasing function, ∫abf(x) dx+∫f(a)f(b)f−1(y) dy=b f(b)−a f(a)\displaystyle\int_a^b f(x)\,dx + \int_{f(a)}^{f(b)} f^{-1}(y)\,dy = b\,f(b) - a\,f(a) (the two areas fill a rectangle minus a rectangle).
  4. Sum =2log⁡29−1⋅1=4log⁡23−1≈4(1.585)−1=5.34= 2\log_2 9 - 1\cdot 1 = 4\log_2 3 - 1 \approx 4(1.585) - 1 = 5.34.
  5. The greatest integer less than or equal to it is 55.
AnswerAnswer: 5
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Logarithms · +3 / −1
The product of all positive real values of xx satisfying the equation x(16(log⁡5x)3−68log⁡5x)=5−16x^{\left(16(\log_5 x)^3 - 68\log_5 x\right)} = 5^{-16} is ______.

Tests: Take logs to turn the exponent equation into a biquadratic in t = log₅ x.

Show solution
  1. Take log⁡5\log_5 of both sides and put t=log⁡5xt = \log_5 x: t (16t3−68t)=−16t\,(16t^3 - 68t) = -16.
  2. So 16t4−68t2+16=016t^4 - 68t^2 + 16 = 0, i.e. 4t4−17t2+4=04t^4 - 17t^2 + 4 = 0, giving t2=17±158=4t^2 = \dfrac{17 \pm 15}{8} = 4 or 14\dfrac{1}{4}.
  3. t=±2,±12t = \pm 2, \pm\dfrac{1}{2}: four values, each giving one positive x=5tx = 5^t.
  4. Product of the xx values =5t1+t2+t3+t4=50=1= 5^{t_1 + t_2 + t_3 + t_4} = 5^{0} = 1.

    Why: The roots of t come in ± pairs, so they add to 0.

AnswerAnswer: 1
Ask about this question
Q5

Mathematics, Question 5 (3 marks)

Limits (series expansion) · +3 / −1
If β=lim⁡x→0ex3−(1−x3)13+((1−x2)12−1)sin⁡xxsin⁡2x\beta = \lim\limits_{x \rightarrow 0} \dfrac{e^{x^3} - (1 - x^3)^{\frac{1}{3}} + \left((1 - x^2)^{\frac{1}{2}} - 1\right)\sin x}{x \sin^2 x}, then the value of 6β6\beta is ______.

Tests: Expand each piece of the numerator to order x³ using standard series.

Show solution
  1. The denominator xsin⁡2x∼x3x\sin^2 x \sim x^3, so expand the numerator up to x3x^3.
  2. ex3=1+x3+O(x6)e^{x^3} = 1 + x^3 + O(x^6) and (1−x3)1/3=1−x33+O(x6)(1 - x^3)^{1/3} = 1 - \dfrac{x^3}{3} + O(x^6); their difference is 43x3+O(x6)\dfrac{4}{3}x^3 + O(x^6).
  3. (1−x2)1/2−1=−x22+O(x4)(1 - x^2)^{1/2} - 1 = -\dfrac{x^2}{2} + O(x^4) and sin⁡x=x+O(x3)\sin x = x + O(x^3), so the product is −x32+O(x5)-\dfrac{x^3}{2} + O(x^5).
  4. β=43−12=56\beta = \dfrac{4}{3} - \dfrac{1}{2} = \dfrac{5}{6}, so 6β=56\beta = 5.
AnswerAnswer: 5
Ask about this question
Q6

Mathematics, Question 6 (3 marks)

Matrices and determinants · +3 / −1
Let β\beta be a real number. Consider the matrix A=(β0121−231−2)A = \begin{pmatrix} \beta & 0 & 1 \\ 2 & 1 & -2 \\ 3 & 1 & -2 \end{pmatrix}. If A7−(β−1)A6−βA5A^7 - (\beta - 1)A^6 - \beta A^5 is a singular matrix, then the value of 9β9\beta is ______.

Tests: Factor the matrix polynomial and use det(product) = product of dets.

Show solution
  1. Factor: A7−(β−1)A6−βA5=A5(A2−(β−1)A−βI)=A5(A−βI)(A+I)A^7 - (\beta - 1)A^6 - \beta A^5 = A^5\left(A^2 - (\beta - 1)A - \beta I\right) = A^5 (A - \beta I)(A + I).
  2. det⁡A=β(−2+2)−0+1(2−3)=−1≠0\det A = \beta(-2 + 2) - 0 + 1(2 - 3) = -1 \ne 0, so A5A^5 is invertible and we need det⁡(A−βI)det⁡(A+I)=0\det(A - \beta I)\det(A + I) = 0.
  3. Characteristic polynomial: det⁡(A−λI)=(β−λ)(λ2+λ)+3λ−1\det(A - \lambda I) = (\beta - \lambda)(\lambda^2 + \lambda) + 3\lambda - 1.

    Why: Expand along the first row: (β − λ)[(1 − λ)(−2 − λ) + 2] + 1·[2 − 3(1 − λ)].

  4. λ=−1\lambda = -1: det⁡(A+I)=(β+1)⋅0−3−1=−4≠0\det(A + I) = (\beta + 1)\cdot 0 - 3 - 1 = -4 \ne 0. λ=β\lambda = \beta: det⁡(A−βI)=3β−1\det(A - \beta I) = 3\beta - 1.
  5. So 3β−1=03\beta - 1 = 0, β=13\beta = \dfrac{1}{3} and 9β=39\beta = 3.
AnswerAnswer: 3
Ask about this question
Q7

Mathematics, Question 7 (3 marks)

Hyperbola · +3 / −1
Consider the hyperbola x2100−y264=1\dfrac{x^2}{100} - \dfrac{y^2}{64} = 1 with foci at SS and S1S_1, where SS lies on the positive xx-axis. Let PP be a point on the hyperbola, in the first quadrant. Let ∠SPS1=α\angle SPS_1 = \alpha, with α<π2\alpha < \dfrac{\pi}{2}. The straight line passing through the point SS and having the same slope as that of the tangent at PP to the hyperbola, intersects the straight line S1PS_1P at P1P_1. Let δ\delta be the distance of PP from the straight line SP1SP_1, and β=S1P\beta = S_1P. Then the greatest integer less than or equal to βδ9sin⁡α2\dfrac{\beta\delta}{9}\sin\dfrac{\alpha}{2} is ______.

Tests: Use the reflection property of the hyperbola to make an isosceles triangle, then the focal-triangle identity r₁r₂ sin²(α/2) = b².

Show solution
  1. Here a=10a = 10, b=8b = 8. Let r1=S1P=βr_1 = S_1P = \beta and r2=SPr_2 = SP; for PP on the right branch r1−r2=2a=20r_1 - r_2 = 2a = 20.
  2. The tangent at PP bisects ∠SPS1\angle SPS_1 internally, so it makes angle α2\dfrac{\alpha}{2} with PSPS and with PS1PS_1.
  3. The line through SS parallel to this bisector meets line S1PS_1P beyond PP, at P1P_1 with PP1=PS=r2PP_1 = PS = r_2: in triangle PSP1PSP_1 the angles at SS and P1P_1 both equal α2\dfrac{\alpha}{2} (alternate and corresponding angles), and the angle at PP is π−α\pi - \alpha.

    Why: This is the same construction used to prove the angle bisector theorem.

  4. δ\delta = distance from the apex PP to the base SP1SP_1 of this isosceles triangle =r2sin⁡α2= r_2\sin\dfrac{\alpha}{2}. So βδ9sin⁡α2=r1r2sin⁡2(α/2)9\dfrac{\beta\delta}{9}\sin\dfrac{\alpha}{2} = \dfrac{r_1 r_2\sin^2(\alpha/2)}{9}.
  5. In triangle SPS1SPS_1: (2c)2=r12+r22−2r1r2cos⁡α=(r1−r2)2+4r1r2sin⁡2α2(2c)^2 = r_1^2 + r_2^2 - 2r_1r_2\cos\alpha = (r_1 - r_2)^2 + 4r_1r_2\sin^2\dfrac{\alpha}{2}, so r1r2sin⁡2α2=c2−a2=b2=64r_1r_2\sin^2\dfrac{\alpha}{2} = c^2 - a^2 = b^2 = 64.
  6. The quantity is 649=7.11…\dfrac{64}{9} = 7.11\ldots for every such PP, and its greatest integer is 77.
AnswerAnswer: 7
Ask about this question
Q8

Mathematics, Question 8 (3 marks)

Area under curves · +3 / −1
Consider the functions f,g:R→Rf, g : \mathbb{R} \rightarrow \mathbb{R} defined by f(x)=x2+512f(x) = x^2 + \dfrac{5}{12} and g(x)={2(1−4∣x∣3),∣x∣≤34,0,∣x∣>34.g(x) = \begin{cases} 2\left(1 - \dfrac{4|x|}{3}\right), & |x| \le \dfrac{3}{4}, \\ 0, & |x| > \dfrac{3}{4}. \end{cases} If α\alpha is the area of the region {(x,y)∈R×R:∣x∣≤34, 0≤y≤min⁡{f(x),g(x)}}\left\{(x, y) \in \mathbb{R} \times \mathbb{R} : |x| \le \dfrac{3}{4},\ 0 \le y \le \min\{f(x), g(x)\}\right\}, then the value of 9α9\alpha is ______.

Tests: Find where the parabola and the tent function cross, and add the area under the lower one on each piece.

Show solution
  1. Both functions are even, so find the area for 0≤x≤340 \le x \le \dfrac{3}{4} and double it. There g(x)=2−8x3g(x) = 2 - \dfrac{8x}{3}, a line from (0,2)(0, 2) to (34,0)\left(\dfrac{3}{4}, 0\right).
  2. Intersection: x2+512=2−8x3⇒12x2+32x−19=0⇒x=−32+4424=12x^2 + \dfrac{5}{12} = 2 - \dfrac{8x}{3} \Rightarrow 12x^2 + 32x - 19 = 0 \Rightarrow x = \dfrac{-32 + 44}{24} = \dfrac{1}{2}.
  3. So min⁡=f\min = f on [0,12]\left[0, \dfrac{1}{2}\right] (since f(0)=512<2f(0) = \dfrac{5}{12} < 2) and min⁡=g\min = g on [12,34]\left[\dfrac{1}{2}, \dfrac{3}{4}\right].
  4. ∫01/2(x2+512)dx=124+524=14\displaystyle\int_0^{1/2}\left(x^2 + \dfrac{5}{12}\right)dx = \dfrac{1}{24} + \dfrac{5}{24} = \dfrac{1}{4}; the part under gg is a triangle with base 14\dfrac{1}{4} and height g(12)=23g\left(\dfrac{1}{2}\right) = \dfrac{2}{3}, area 112\dfrac{1}{12}.
  5. α=2(14+112)=23\alpha = 2\left(\dfrac{1}{4} + \dfrac{1}{12}\right) = \dfrac{2}{3}, so 9α=69\alpha = 6.
AnswerAnswer: 6
Ask about this question

Mathematics, Section 2: 6 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q9

Mathematics, Question 9 (4 marks)

Properties of triangles · +4 / −2
Let PQRSPQRS be a quadrilateral in a plane, where QR=1QR = 1, ∠PQR=∠QRS=70∘\angle PQR = \angle QRS = 70^\circ, ∠PQS=15∘\angle PQS = 15^\circ and ∠PRS=40∘\angle PRS = 40^\circ. If ∠RPS=θ∘\angle RPS = \theta^\circ, PQ=αPQ = \alpha and PS=βPS = \beta, then the interval(s) that contain(s) the value of 4αβsin⁡θ∘4\alpha\beta\sin\theta^\circ is/are
  1. (A)(0,2)(0, \sqrt{2})
  2. (B)(1,2)(1, 2)
  3. (C)(2,3)(\sqrt{2}, 3)
  4. (D)(22,32)(2\sqrt{2}, 3\sqrt{2})

Tests: Chase the angles into three triangles and use the sine rule so that θ never has to be found.

Show solution
  1. Triangle PQRPQR: ∠PQR=70∘\angle PQR = 70^\circ, ∠QRP=70∘−40∘=30∘\angle QRP = 70^\circ - 40^\circ = 30^\circ, so ∠QPR=80∘\angle QPR = 80^\circ. Sine rule: α=PQ=QRsin⁡30∘sin⁡80∘=12sin⁡80∘\alpha = PQ = \dfrac{QR\sin 30^\circ}{\sin 80^\circ} = \dfrac{1}{2\sin 80^\circ}.
  2. Triangle QRSQRS: ∠RQS=70∘−15∘=55∘\angle RQS = 70^\circ - 15^\circ = 55^\circ, ∠QRS=70∘\angle QRS = 70^\circ, so ∠QSR=55∘\angle QSR = 55^\circ and RS=QR=1RS = QR = 1.

    Why: Equal base angles make triangle QRS isosceles.

  3. Triangle PRSPRS: sine rule PSsin⁡∠PRS=RSsin⁡∠RPS\dfrac{PS}{\sin\angle PRS} = \dfrac{RS}{\sin\angle RPS} gives βsin⁡θ∘=RSsin⁡40∘=sin⁡40∘\beta\sin\theta^\circ = RS\sin 40^\circ = \sin 40^\circ.
  4. So 4αβsin⁡θ∘=4sin⁡40∘2sin⁡80∘=2sin⁡40∘2sin⁡40∘cos⁡40∘=sec⁡40∘≈1.3054\alpha\beta\sin\theta^\circ = \dfrac{4\sin 40^\circ}{2\sin 80^\circ} = \dfrac{2\sin 40^\circ}{2\sin 40^\circ\cos 40^\circ} = \sec 40^\circ \approx 1.305.
  5. cos⁡40∘\cos 40^\circ lies between cos⁡45∘=12\cos 45^\circ = \dfrac{1}{\sqrt{2}} and 11, so 1<sec⁡40∘<21 < \sec 40^\circ < \sqrt{2}. (A) true, (B) true (as 2<2\sqrt{2} < 2), (C) false, (D) false.
AnswerAnswer: (A), (B)
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Applications of derivatives (maxima and minima) · +4 / −2
Let α=∑k=1∞sin⁡2k(π6)\alpha = \displaystyle\sum_{k=1}^{\infty}\sin^{2k}\left(\dfrac{\pi}{6}\right). Let g:[0,1]→Rg : [0, 1] \rightarrow \mathbb{R} be the function defined by g(x)=2αx+2α(1−x)g(x) = 2^{\alpha x} + 2^{\alpha(1 - x)}. Then, which of the following statements is/are TRUE?
  1. (A)The minimum value of g(x)g(x) is 2762^{\frac{7}{6}}
  2. (B)The maximum value of g(x)g(x) is 1+2131 + 2^{\frac{1}{3}}
  3. (C)The function g(x)g(x) attains its maximum at more than one point
  4. (D)The function g(x)g(x) attains its minimum at more than one point

Tests: Sum the geometric series, then use AM–GM and symmetry to find the extreme values of g.

Show solution
  1. sin⁡2π6=14\sin^2\dfrac{\pi}{6} = \dfrac{1}{4}, so α=1/41−1/4=13\alpha = \dfrac{1/4}{1 - 1/4} = \dfrac{1}{3} and g(x)=2x/3+2(1−x)/3g(x) = 2^{x/3} + 2^{(1 - x)/3}.
  2. AM–GM: g(x)≥22x/3⋅2(1−x)/3=2⋅21/6=27/6g(x) \ge 2\sqrt{2^{x/3}\cdot 2^{(1 - x)/3}} = 2\cdot 2^{1/6} = 2^{7/6}, with equality only when 2x/3=2(1−x)/32^{x/3} = 2^{(1 - x)/3}, i.e. x=12x = \dfrac{1}{2}. (A) true, (D) false.
  3. Put u=2x/3∈[1,21/3]u = 2^{x/3} \in [1, 2^{1/3}]: g=u+21/3ug = u + \dfrac{2^{1/3}}{u}, which is convex in uu, so its maximum on the interval is at an endpoint.
  4. g(0)=g(1)=1+21/3g(0) = g(1) = 1 + 2^{1/3}, the maximum. (B) true, and it is attained at two points, x=0x = 0 and x=1x = 1: (C) true.

    Why: g(x) = g(1 − x), so the graph is symmetric about x = 1/2.

AnswerAnswer: (A), (B), (C)
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Complex numbers · +4 / −2
Let zˉ\bar{z} denote the complex conjugate of a complex number zz. If zz is a non-zero complex number for which both real and imaginary parts of (zˉ)2+1z2(\bar{z})^2 + \dfrac{1}{z^2} are integers, then which of the following is/are possible value(s) of ∣z∣|z|?
  1. (A)(43+32052)14\left(\dfrac{43 + 3\sqrt{205}}{2}\right)^{\frac{1}{4}}
  2. (B)(7+334)14\left(\dfrac{7 + \sqrt{33}}{4}\right)^{\frac{1}{4}}
  3. (C)(9+654)14\left(\dfrac{9 + \sqrt{65}}{4}\right)^{\frac{1}{4}}
  4. (D)(7+136)14\left(\dfrac{7 + \sqrt{13}}{6}\right)^{\frac{1}{4}}

Tests: Reduce the condition to |z|⁴ + |z|⁻⁴ + 2 being an integer that is a sum of two squares, then test each option.

Show solution
  1. Write z=reiϕz = re^{i\phi}. Then (zˉ)2+1z2=r2e−2iϕ+1r2e−2iϕ=(r2+1r2)e−2iϕ(\bar{z})^2 + \dfrac{1}{z^2} = r^2e^{-2i\phi} + \dfrac{1}{r^2}e^{-2i\phi} = \left(r^2 + \dfrac{1}{r^2}\right)e^{-2i\phi}.
  2. If the real and imaginary parts are integers m,nm, n, then m2+n2=(r2+1r2)2=r4+1r4+2m^2 + n^2 = \left(r^2 + \dfrac{1}{r^2}\right)^2 = r^4 + \dfrac{1}{r^4} + 2. So u+1u+2u + \dfrac{1}{u} + 2 (with u=r4u = r^4) must be an integer that is a sum of two squares; conversely any such m,nm, n give a suitable angle ϕ\phi.
  3. (A) u=43+32052u = \dfrac{43 + 3\sqrt{205}}{2}: since 432−9⋅205=443^2 - 9\cdot 205 = 4, 1u=43−32052\dfrac{1}{u} = \dfrac{43 - 3\sqrt{205}}{2} and u+1u=43u + \dfrac{1}{u} = 43. Then 43+2=45=62+3243 + 2 = 45 = 6^2 + 3^2. Possible: true.
  4. (B) u=7+334u = \dfrac{7 + \sqrt{33}}{4}: 49−33=1649 - 33 = 16, so 1u=7−334\dfrac{1}{u} = \dfrac{7 - \sqrt{33}}{4}, u+1u=72u + \dfrac{1}{u} = \dfrac{7}{2} and m2+n2=112m^2 + n^2 = \dfrac{11}{2}, not an integer: false.
  5. (C) u=9+654u = \dfrac{9 + \sqrt{65}}{4}: 81−65=1681 - 65 = 16, u+1u=92u + \dfrac{1}{u} = \dfrac{9}{2}, m2+n2=132m^2 + n^2 = \dfrac{13}{2}: false. (D) u=7+136u = \dfrac{7 + \sqrt{13}}{6}: 49−13=3649 - 13 = 36, u+1u=73u + \dfrac{1}{u} = \dfrac{7}{3}, m2+n2=133m^2 + n^2 = \dfrac{13}{3}: false.
AnswerAnswer: (A)
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Circles · +4 / −2
Let GG be a circle of radius R>0R > 0. Let G1,G2,…,GnG_1, G_2, \ldots, G_n be nn circles of equal radius r>0r > 0. Suppose each of the nn circles G1,G2,…,GnG_1, G_2, \ldots, G_n touches the circle GG externally. Also, for i=1,2,…,n−1i = 1, 2, \ldots, n - 1, the circle GiG_i touches Gi+1G_{i+1} externally, and GnG_n touches G1G_1 externally. Then, which of the following statements is/are TRUE?
  1. (A)If n=4n = 4, then (2−1)r<R(\sqrt{2} - 1)r < R
  2. (B)If n=5n = 5, then r<Rr < R
  3. (C)If n=8n = 8, then (2−1)r<R(\sqrt{2} - 1)r < R
  4. (D)If n=12n = 12, then 2(3+1)r>R\sqrt{2}(\sqrt{3} + 1)r > R

Tests: Relate R and r through the regular n-gon formed by the centres of the small circles.

Show solution
  1. The centres of the small circles lie at distance R+rR + r from the centre OO of GG, and neighbouring centres are 2r2r apart, subtending angle 2πn\dfrac{2\pi}{n} at OO.
  2. Half that chord: r=(R+r)sin⁡πnr = (R + r)\sin\dfrac{\pi}{n}, i.e. R=r(1sin⁡(π/n)−1)R = r\left(\dfrac{1}{\sin(\pi/n)} - 1\right).
  3. (A) n=4n = 4: R=r(2−1)R = r(\sqrt{2} - 1) exactly, so the strict inequality (2−1)r<R(\sqrt{2} - 1)r < R is false.
  4. (B) n=5n = 5: sin⁡36∘≈0.588\sin 36^\circ \approx 0.588, R≈r(1.701−1)=0.701r<rR \approx r(1.701 - 1) = 0.701r < r, so r<Rr < R is false.
  5. (C) n=8n = 8: sin⁡22.5∘≈0.383\sin 22.5^\circ \approx 0.383, R≈1.613r>(2−1)rR \approx 1.613r > (\sqrt{2} - 1)r: true.
  6. (D) n=12n = 12: sin⁡15∘=3−122\sin 15^\circ = \dfrac{\sqrt{3} - 1}{2\sqrt{2}}, so 1sin⁡15∘=2(3+1)\dfrac{1}{\sin 15^\circ} = \sqrt{2}(\sqrt{3} + 1) and R=r(2(3+1)−1)<2(3+1)rR = r\left(\sqrt{2}(\sqrt{3} + 1) - 1\right) < \sqrt{2}(\sqrt{3} + 1)r: true.
AnswerAnswer: (C), (D)
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Vector algebra · +4 / −2
Let i^,j^\hat{i}, \hat{j} and k^\hat{k} be the unit vectors along the three positive coordinate axes. Let a⃗=3i^+j^−k^\vec{a} = 3\hat{i} + \hat{j} - \hat{k}, b⃗=i^+b2j^+b3k^\vec{b} = \hat{i} + b_2\hat{j} + b_3\hat{k}, b2,b3∈Rb_2, b_3 \in \mathbb{R}, c⃗=c1i^+c2j^+c3k^\vec{c} = c_1\hat{i} + c_2\hat{j} + c_3\hat{k}, c1,c2,c3∈Rc_1, c_2, c_3 \in \mathbb{R} be three vectors such that b2b3>0b_2b_3 > 0, a⃗⋅b⃗=0\vec{a}\cdot\vec{b} = 0 and (0−c3c2c30−c1−c2c10)(1b2b3)=(3−c11−c2−1−c3)\begin{pmatrix} 0 & -c_3 & c_2 \\ c_3 & 0 & -c_1 \\ -c_2 & c_1 & 0 \end{pmatrix}\begin{pmatrix} 1 \\ b_2 \\ b_3 \end{pmatrix} = \begin{pmatrix} 3 - c_1 \\ 1 - c_2 \\ -1 - c_3 \end{pmatrix}. Then, which of the following is/are TRUE?
  1. (A)a⃗⋅c⃗=0\vec{a}\cdot\vec{c} = 0
  2. (B)b⃗⋅c⃗=0\vec{b}\cdot\vec{c} = 0
  3. (C)∣b⃗∣>10|\vec{b}| > \sqrt{10}
  4. (D)∣c⃗∣≤11|\vec{c}| \le \sqrt{11}

Tests: Read the skew-symmetric matrix product as a cross product and dot the resulting vector equation with b and c.

Show solution
  1. The skew matrix times b⃗\vec{b} is c⃗×b⃗\vec{c}\times\vec{b} (first row: c2b3−c3b2c_2b_3 - c_3b_2), and the right side is a⃗−c⃗\vec{a} - \vec{c}. So a⃗=c⃗+c⃗×b⃗\vec{a} = \vec{c} + \vec{c}\times\vec{b}.
  2. (B) Dot with b⃗\vec{b}: a⃗⋅b⃗=c⃗⋅b⃗+0\vec{a}\cdot\vec{b} = \vec{c}\cdot\vec{b} + 0, and a⃗⋅b⃗=0\vec{a}\cdot\vec{b} = 0, so b⃗⋅c⃗=0\vec{b}\cdot\vec{c} = 0: true.
  3. (A) Dot with c⃗\vec{c}: a⃗⋅c⃗=∣c⃗∣2\vec{a}\cdot\vec{c} = |\vec{c}|^2. This is 00 only if c⃗=0⃗\vec{c} = \vec{0}, which would force a⃗=0⃗\vec{a} = \vec{0}: so false.
  4. (C) a⃗⋅b⃗=3+b2−b3=0\vec{a}\cdot\vec{b} = 3 + b_2 - b_3 = 0, so b3−b2=3b_3 - b_2 = 3. Then b22+b32=(b3−b2)2+2b2b3=9+2b2b3>9b_2^2 + b_3^2 = (b_3 - b_2)^2 + 2b_2b_3 = 9 + 2b_2b_3 > 9, and ∣b⃗∣2=1+b22+b32>10|\vec{b}|^2 = 1 + b_2^2 + b_3^2 > 10: true.
  5. (D) c⃗\vec{c} and c⃗×b⃗\vec{c}\times\vec{b} are perpendicular, and ∣c⃗×b⃗∣=∣c⃗∣∣b⃗∣|\vec{c}\times\vec{b}| = |\vec{c}||\vec{b}| since c⃗⊥b⃗\vec{c}\perp\vec{b}. So ∣a⃗∣2=11=∣c⃗∣2(1+∣b⃗∣2)|\vec{a}|^2 = 11 = |\vec{c}|^2(1 + |\vec{b}|^2), giving ∣c⃗∣2=111+∣b⃗∣2<1|\vec{c}|^2 = \dfrac{11}{1 + |\vec{b}|^2} < 1. Hence ∣c⃗∣<1≤11|\vec{c}| < 1 \le \sqrt{11}: true.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q14

Mathematics, Question 14 (4 marks)

Differential equations (linear) · +4 / −2
For x∈Rx \in \mathbb{R}, let the function y(x)y(x) be the solution of the differential equation dydx+12y=cos⁡(π12x)\dfrac{dy}{dx} + 12y = \cos\left(\dfrac{\pi}{12}x\right), y(0)=0y(0) = 0. Then, which of the following statements is/are TRUE?
  1. (A)y(x)y(x) is an increasing function
  2. (B)y(x)y(x) is a decreasing function
  3. (C)There exists a real number β\beta such that the line y=βy = \beta intersects the curve y=y(x)y = y(x) at infinitely many points
  4. (D)y(x)y(x) is a periodic function

Tests: Solve the linear equation and read off the long-run behaviour: decaying transient plus a periodic part.

Show solution
  1. Linear equation, integrating factor e12xe^{12x}. With ω=π12\omega = \dfrac{\pi}{12}: y=12cos⁡ωx+ωsin⁡ωx144+ω2−12144+ω2e−12xy = \dfrac{12\cos\omega x + \omega\sin\omega x}{144 + \omega^2} - \dfrac{12}{144 + \omega^2}e^{-12x}.

    Why: The particular part comes from ∫e^{12x}cos ωx dx; the constant is fixed by y(0) = 0.

  2. The first part is a sinusoid 1144+ω2cos⁡(ωx−φ)\dfrac{1}{\sqrt{144 + \omega^2}}\cos(\omega x - \varphi) of period 24; the second part is a decaying exponential that tends to 00 as x→∞x \rightarrow \infty and to −∞-\infty as x→−∞x \rightarrow -\infty.
  3. (A), (B) false: y′(0)=1−12⋅0=1>0y'(0) = 1 - 12\cdot 0 = 1 > 0, but for large xx, y′≈−ωsin⁡(ωx−φ)144+ω2y' \approx -\dfrac{\omega\sin(\omega x - \varphi)}{\sqrt{144 + \omega^2}} keeps changing sign, so yy is neither increasing nor decreasing.
  4. (D) false: y→−∞y \rightarrow -\infty as x→−∞x \rightarrow -\infty, so yy is unbounded and cannot be periodic (a continuous periodic function is bounded).
  5. (C) true: for large xx, yy is the sinusoid plus a term that tends to 00, so it takes values above and below 00 in every period; the line y=0y = 0 (any β\beta strictly between the sinusoid's minimum and maximum works) meets the curve infinitely often.
AnswerAnswer: (C)
Ask about this question

Mathematics, Section 3: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Mathematics, Question 15 (3 marks)

Permutations and combinations · +3 / −1
Consider 4 boxes, where each box contains 3 red balls and 2 blue balls. Assume that all 20 balls are distinct. In how many different ways can 10 balls be chosen from these 4 boxes so that from each box at least one red ball and one blue ball are chosen?
  1. (A)21816
  2. (B)85536
  3. (C)12096
  4. (D)156816

Tests: Count per-box choices by size, then distribute the extra balls among the boxes.

Show solution
  1. Ways to take kk balls from one box with at least one red and one blue: k=2k = 2: (1R,1B)(1R, 1B) 3⋅2=63\cdot 2 = 6; k=3k = 3: (2R,1B)+(1R,2B)=6+3=9(2R, 1B) + (1R, 2B) = 6 + 3 = 9; k=4k = 4: (3R,1B)+(2R,2B)=2+3=5(3R, 1B) + (2R, 2B) = 2 + 3 = 5; k=5k = 5: 11.
  2. Each box gives at least 2, so 8 balls are forced and 2 extra must be spread over 4 boxes: either one box takes 4 balls, or two boxes take 3 each.
  3. One box with 4: 4×5×63=43204 \times 5 \times 6^3 = 4320.
  4. Two boxes with 3: (42)×92×62=6×81×36=17496\binom{4}{2}\times 9^2 \times 6^2 = 6 \times 81 \times 36 = 17496.
  5. Total =4320+17496=21816= 4320 + 17496 = 21816.
AnswerAnswer: (A) 21816
Ask about this question
Q16

Mathematics, Question 16 (3 marks)

Matrices · +3 / −1
If M=(5232−32−12)M = \begin{pmatrix} \frac{5}{2} & \frac{3}{2} \\ -\frac{3}{2} & -\frac{1}{2} \end{pmatrix}, then which of the following matrices is equal to M2022M^{2022}?
  1. (A)(30343033−3033−3032)\begin{pmatrix} 3034 & 3033 \\ -3033 & -3032 \end{pmatrix}
  2. (B)(3034−30333033−3032)\begin{pmatrix} 3034 & -3033 \\ 3033 & -3032 \end{pmatrix}
  3. (C)(30333032−3032−3031)\begin{pmatrix} 3033 & 3032 \\ -3032 & -3031 \end{pmatrix}
  4. (D)(30323031−3031−3030)\begin{pmatrix} 3032 & 3031 \\ -3031 & -3030 \end{pmatrix}

Tests: Split M into identity plus a nilpotent matrix and use the binomial theorem.

Show solution
  1. Write M=I+NM = I + N with N=(3232−32−32)N = \begin{pmatrix} \frac{3}{2} & \frac{3}{2} \\ -\frac{3}{2} & -\frac{3}{2} \end{pmatrix}.
  2. N2=94(1−11−1−1+1−1+1)=ON^2 = \dfrac{9}{4}\begin{pmatrix} 1 - 1 & 1 - 1 \\ -1 + 1 & -1 + 1 \end{pmatrix} = O.

    Why: Trace 0 and determinant 0, so N² = O by Cayley–Hamilton.

  3. II and NN commute, so by the binomial theorem M2022=I+2022NM^{2022} = I + 2022N (all higher powers of NN vanish).
  4. 2022N=(30333033−3033−3033)2022N = \begin{pmatrix} 3033 & 3033 \\ -3033 & -3033 \end{pmatrix}, so M2022=(30343033−3033−3032)M^{2022} = \begin{pmatrix} 3034 & 3033 \\ -3033 & -3032 \end{pmatrix}.
AnswerAnswer: (A)
Ask about this question
Q17

Mathematics, Question 17 (3 marks)

Probability (conditional probability) · +3 / −1
Suppose that Box-I contains 8 red, 3 blue and 5 green balls, Box-II contains 24 red, 9 blue and 15 green balls, Box-III contains 1 blue, 12 green and 3 yellow balls, Box-IV contains 10 green, 16 orange and 6 white balls. A ball is chosen randomly from Box-I; call this ball bb. If bb is red then a ball is chosen randomly from Box-II, if bb is blue then a ball is chosen randomly from Box-III, and if bb is green then a ball is chosen randomly from Box-IV. The conditional probability of the event 'one of the chosen balls is white' given that the event 'at least one of the chosen balls is green' has happened, is equal to
  1. (A)15256\dfrac{15}{256}
  2. (B)316\dfrac{3}{16}
  3. (C)552\dfrac{5}{52}
  4. (D)18\dfrac{1}{8}

Tests: Compute P(at least one green) over all three branches and the joint probability with 'white'.

Show solution
  1. From Box-I (16 balls): P(red)=12P(\text{red}) = \dfrac{1}{2}, P(blue)=316P(\text{blue}) = \dfrac{3}{16}, P(green)=516P(\text{green}) = \dfrac{5}{16}.
  2. P(G)=516+12⋅1548+316⋅1216=240+120+108768=468768P(G) = \dfrac{5}{16} + \dfrac{1}{2}\cdot\dfrac{15}{48} + \dfrac{3}{16}\cdot\dfrac{12}{16} = \dfrac{240 + 120 + 108}{768} = \dfrac{468}{768}.

    Why: If b is green, at least one ball is green whatever comes from Box-IV.

  3. A white ball is possible only from Box-IV, i.e. only when bb is green, and then GG has happened too: P(W∩G)=516⋅632=45768P(W \cap G) = \dfrac{5}{16}\cdot\dfrac{6}{32} = \dfrac{45}{768}.
  4. P(W∣G)=45468=552P(W \mid G) = \dfrac{45}{468} = \dfrac{5}{52}.
AnswerAnswer: (C) 552\dfrac{5}{52}
Ask about this question
Q18

Mathematics, Question 18 (3 marks)

Limits as definite integrals · +3 / −1
For positive integer nn, define f(n)=n+16+5n−3n24n+3n2+32+n−3n28n+3n2+48−3n−3n212n+3n2+⋯+25n−7n27n2f(n) = n + \dfrac{16 + 5n - 3n^2}{4n + 3n^2} + \dfrac{32 + n - 3n^2}{8n + 3n^2} + \dfrac{48 - 3n - 3n^2}{12n + 3n^2} + \cdots + \dfrac{25n - 7n^2}{7n^2}. Then, the value of lim⁡n→∞f(n)\lim\limits_{n \rightarrow \infty} f(n) is equal to
  1. (A)3+43log⁡e73 + \dfrac{4}{3}\log_e 7
  2. (B)4−34log⁡e(73)4 - \dfrac{3}{4}\log_e\left(\dfrac{7}{3}\right)
  3. (C)4−43log⁡e(73)4 - \dfrac{4}{3}\log_e\left(\dfrac{7}{3}\right)
  4. (D)3+34log⁡e73 + \dfrac{3}{4}\log_e 7

Tests: Find the general term, cancel the n against the −1's, and turn the rest into a Riemann sum.

Show solution
  1. General term (k=1,2,…k = 1, 2, \ldots): 16k+(9−4k)n−3n24kn+3n2\dfrac{16k + (9 - 4k)n - 3n^2}{4kn + 3n^2}. The last term has 4kn+3n2=7n24kn + 3n^2 = 7n^2, so k=nk = n (check: numerator 16n+9n−4n2−3n2=25n−7n216n + 9n - 4n^2 - 3n^2 = 25n - 7n^2).
  2. Numerator =−(4kn+3n2)+16k+9n= -(4kn + 3n^2) + 16k + 9n, so each term is −1+16k+9nn(4k+3n)-1 + \dfrac{16k + 9n}{n(4k + 3n)}. The nn terms of −1-1 cancel the leading nn.
  3. f(n)=1n∑k=1n16(k/n)+94(k/n)+3→∫0116x+94x+3 dxf(n) = \dfrac{1}{n}\displaystyle\sum_{k=1}^{n}\dfrac{16(k/n) + 9}{4(k/n) + 3} \rightarrow \int_0^1 \dfrac{16x + 9}{4x + 3}\,dx.

    Why: A Riemann sum with step 1/n on [0, 1].

  4. 16x+94x+3=4−34x+3\dfrac{16x + 9}{4x + 3} = 4 - \dfrac{3}{4x + 3}, so the integral is 4−34[log⁡e(4x+3)]01=4−34log⁡e734 - \dfrac{3}{4}\left[\log_e(4x + 3)\right]_0^1 = 4 - \dfrac{3}{4}\log_e\dfrac{7}{3}.
AnswerAnswer: (B) 4−34log⁡e(73)4 - \dfrac{3}{4}\log_e\left(\dfrac{7}{3}\right)
Ask about this question

Physics, Section 1: 8 questions, the answer is a single-digit integer from 0 to 9: +3 if only the correct integer is entered, 0 if unanswered, −1 in all other cases

Q1

Physics, Question 1 (3 marks)

Angular momentum · +3 / −1
A particle of mass 1 kg1\ \text{kg} is subjected to a force which depends on the position as F⃗=−k(xi^+yj^) kg m s−2\vec{F} = -k(x\hat{i} + y\hat{j})\ \text{kg m s}^{-2} with k=1 kg s−2k = 1\ \text{kg s}^{-2}. At time t=0t = 0, the particle's position r⃗=(12i^+2j^)m\vec{r} = \left(\dfrac{1}{\sqrt{2}}\hat{i} + \sqrt{2}\hat{j}\right)\text{m} and its velocity v⃗=(−2i^+2j^+2πk^)m s−1\vec{v} = \left(-\sqrt{2}\hat{i} + \sqrt{2}\hat{j} + \dfrac{2}{\pi}\hat{k}\right)\text{m s}^{-1}. Let vxv_x and vyv_y denote the xx and the yy components of the particle's velocity, respectively. Ignore gravity. When z=0.5 mz = 0.5\ \text{m}, the value of (xvy−yvx)(x v_y - y v_x) is ______ m2s−1\text{m}^2\text{s}^{-1}.

Tests: Spot a conserved angular momentum component and evaluate it at the start instead of solving the motion.

Show solution
  1. xvy−yvxx v_y - y v_x is Lz/mL_z/m, the zz-component of angular momentum about the origin per unit mass.
  2. Torque about the origin: τz=xFy−yFx=x(−ky)−y(−kx)=0\tau_z = xF_y - yF_x = x(-ky) - y(-kx) = 0. So LzL_z is conserved for all time.

    Why: The force in the xy-plane points straight at the z-axis, so it has no turning effect about it.

  3. The value of zz only tells us when we look; LzL_z is the same at every moment. (Here vz=2/πv_z = 2/\pi stays constant, so z=0.5z = 0.5 m is reached at t=π/4t = \pi/4 s.)
  4. At t=0t = 0: xvy−yvx=12⋅2−2⋅(−2)=1+2=3 m2s−1x v_y - y v_x = \dfrac{1}{\sqrt{2}}\cdot\sqrt{2} - \sqrt{2}\cdot(-\sqrt{2}) = 1 + 2 = 3\ \text{m}^2\text{s}^{-1}.
AnswerAnswer: 3
Ask about this question
Q2

Physics, Question 2 (3 marks)

Radioactivity · +3 / −1
In a radioactive decay chain reaction, 90230Th^{230}_{90}\mathrm{Th} nucleus decays into 84214Po^{214}_{84}\mathrm{Po} nucleus. The ratio of the number of α\alpha to number of β−\beta^- particles emitted in this process is ______.

Tests: Count alpha and beta decays in a chain from the changes in mass number and atomic number.

Show solution
  1. Only α\alpha decay changes the mass number, by 4 each: 230−214=16230 - 214 = 16, so 16/4=416/4 = 4 alpha particles.
  2. Four α\alpha decays lower ZZ by 88: 90−8=8290 - 8 = 82. But Po has Z=84Z = 84, so ZZ must rise by 22.
  3. Each β−\beta^- decay raises ZZ by 1 without changing AA: 2 beta-minus particles.
  4. Ratio =4:2=2= 4 : 2 = 2.
AnswerAnswer: 2
Ask about this question
Q3

Physics, Question 3 (3 marks)

Wheatstone bridge · +3 / −1
Two resistances R1=X ΩR_1 = X\ \Omega and R2=1 ΩR_2 = 1\ \Omega are connected to a wire ABAB of uniform resistivity, as shown in the figure. The radius of the wire varies linearly along its axis from 0.2 mm0.2\ \text{mm} at AA to 1 mm1\ \text{mm} at BB. A galvanometer (G) connected to the center of the wire, 50 cm50\ \text{cm} from each end along its axis, shows zero deflection when AA and BB are connected to a battery. The value of XX is ______. (The figure shows R1R_1 from end AA up to a top junction and R2R_2 from that junction down to end BB; the galvanometer joins the top junction to the midpoint of the wire ABAB; the battery is connected across AA and BB.)

Tests: Find the resistance of a tapered wire by integration and use the balance condition of a bridge.

Show solution
  1. Balanced bridge: R1R2=RACRCB\dfrac{R_1}{R_2} = \dfrac{R_{AC}}{R_{CB}}, where CC is the midpoint of the wire.

    Why: Zero deflection means the top junction and C are at the same potential.

  2. Radius r=0.2+0.8 xr = 0.2 + 0.8\,x (mm, with xx in metres from AA). A slice has dR=ρ dxπr2dR = \dfrac{\rho\,dx}{\pi r^2}, and dx=dr0.8dx = \dfrac{dr}{0.8}, so R∝∫drr2=[−1r]R \propto \displaystyle\int \dfrac{dr}{r^2} = \left[-\dfrac{1}{r}\right].
  3. At CC, r=0.6r = 0.6 mm. RAC∝10.2−10.6=103R_{AC} \propto \dfrac{1}{0.2} - \dfrac{1}{0.6} = \dfrac{10}{3} and RCB∝10.6−11=23R_{CB} \propto \dfrac{1}{0.6} - \dfrac{1}{1} = \dfrac{2}{3} (same constant).
  4. X1=10/32/3=5\dfrac{X}{1} = \dfrac{10/3}{2/3} = 5, so X=5 ΩX = 5\ \Omega.
AnswerAnswer: 5
Ask about this question
Q4

Physics, Question 4 (3 marks)

Units and dimensions · +3 / −1
In a particular system of units, a physical quantity can be expressed in terms of the electric charge ee, electron mass mem_e, Planck's constant hh, and Coulomb's constant k=14πϵ0k = \dfrac{1}{4\pi\epsilon_0}, where ϵ0\epsilon_0 is the permittivity of vacuum. In terms of these physical constants, the dimension of the magnetic field is [B]=[e]α[me]β[h]γ[k]δ[B] = [e]^{\alpha}[m_e]^{\beta}[h]^{\gamma}[k]^{\delta}. The value of α+β+γ+δ\alpha + \beta + \gamma + \delta is ______.

Tests: Express a quantity's dimensions in a new set of base constants by matching powers.

Show solution
  1. Use charge QQ as a base dimension. [e]=Q[e] = Q, [me]=M[m_e] = M, [h]=ML2T−1[h] = ML^2T^{-1}, and from F=ke2/r2F = ke^2/r^2: [k]=ML3T−2Q−2[k] = ML^3T^{-2}Q^{-2}.
  2. From F=qvBF = qvB: [B]=MLT−2Q⋅LT−1=MT−1Q−1[B] = \dfrac{MLT^{-2}}{Q\cdot LT^{-1}} = MT^{-1}Q^{-1}.
  3. Match powers. MM: β+γ+δ=1\beta + \gamma + \delta = 1. LL: 2γ+3δ=02\gamma + 3\delta = 0. TT: −γ−2δ=−1-\gamma - 2\delta = -1. QQ: α−2δ=−1\alpha - 2\delta = -1.
  4. From LL and TT: γ=−32δ\gamma = -\tfrac{3}{2}\delta and γ+2δ=1⇒δ=2\gamma + 2\delta = 1 \Rightarrow \delta = 2, γ=−3\gamma = -3. Then β=1+3−2=2\beta = 1 + 3 - 2 = 2 and α=−1+4=3\alpha = -1 + 4 = 3.
  5. α+β+γ+δ=3+2−3+2=4\alpha + \beta + \gamma + \delta = 3 + 2 - 3 + 2 = 4.
AnswerAnswer: 4
Ask about this question
Q5

Physics, Question 5 (3 marks)

Refraction through parallel slabs · +3 / −1
Consider a configuration of nn identical units, each consisting of three layers. The first layer is a column of air of height h=13 cmh = \dfrac{1}{3}\ \text{cm}, and the second and third layers are of equal thickness d=3−12 cmd = \dfrac{\sqrt{3} - 1}{2}\ \text{cm}, and refractive indices μ1=32\mu_1 = \sqrt{\dfrac{3}{2}} and μ2=3\mu_2 = \sqrt{3}, respectively. A light source O is placed on the top of the first unit, as shown in the figure. A ray of light from O is incident on the second layer of the first unit at an angle of θ=60∘\theta = 60^\circ to the normal. For a specific value of nn, the ray of light emerges from the bottom of the configuration at a distance l=83 cml = \dfrac{8}{\sqrt{3}}\ \text{cm}, as shown in the figure. The value of nn is ______. (The figure shows the horizontal stack: air hh, μ1\mu_1 layer, μ2\mu_2 layer, repeated nn times; O at the top of the first air layer; ll is the horizontal distance from the vertical through O to the point where the ray leaves the bottom of the last μ2\mu_2 layer.)

Tests: Add up the lateral shifts of a ray through a stack of parallel layers using Snell's law in each layer.

Show solution
  1. Snell's law across parallel layers: μsin⁡r=1⋅sin⁡60∘\mu\sin r = 1\cdot\sin 60^\circ in every layer. In μ1\mu_1: sin⁡r1=3/23/2=12\sin r_1 = \dfrac{\sqrt{3}/2}{\sqrt{3/2}} = \dfrac{1}{\sqrt{2}}, r1=45∘r_1 = 45^\circ. In μ2\mu_2: sin⁡r2=3/23=12\sin r_2 = \dfrac{\sqrt{3}/2}{\sqrt{3}} = \dfrac{1}{2}, r2=30∘r_2 = 30^\circ.

    Why: With parallel faces, μ sin r is the same in every layer, so each angle depends only on that layer's index.

  2. Sideways shift per unit: htan⁡60∘+dtan⁡45∘+dtan⁡30∘=33+d(1+13)h\tan 60^\circ + d\tan 45^\circ + d\tan 30^\circ = \dfrac{\sqrt{3}}{3} + d\left(1 + \dfrac{1}{\sqrt{3}}\right).
  3. d(1+13)=3−12⋅3+13=223=13d\left(1 + \dfrac{1}{\sqrt{3}}\right) = \dfrac{\sqrt{3} - 1}{2}\cdot\dfrac{\sqrt{3} + 1}{\sqrt{3}} = \dfrac{2}{2\sqrt{3}} = \dfrac{1}{\sqrt{3}}, so each unit shifts the ray by 13+13=23\dfrac{1}{\sqrt{3}} + \dfrac{1}{\sqrt{3}} = \dfrac{2}{\sqrt{3}} cm.
  4. n⋅23=83⇒n=4n \cdot \dfrac{2}{\sqrt{3}} = \dfrac{8}{\sqrt{3}} \Rightarrow n = 4.
AnswerAnswer: 4
Ask about this question
Q6

Physics, Question 6 (3 marks)

Gauss's law · +3 / −1
A charge qq is surrounded by a closed surface consisting of an inverted cone of height hh and base radius RR, and a hemisphere of radius RR as shown in the figure. The electric flux through the conical surface is nq6ϵ0\dfrac{nq}{6\epsilon_0} (in SI units). The value of nn is ______. (The figure shows the hemisphere sitting on the circular base of the cone, the cone pointing down; the charge qq is at the centre of the common circle of radius RR.)

Tests: Split the flux of a point charge between parts of a closed surface using symmetry and solid angle.

Show solution
  1. Total flux through the closed surface: qϵ0\dfrac{q}{\epsilon_0} (Gauss's law).
  2. The charge sits at the centre of the flat circle. Every field line going upward (half of all directions) leaves through the hemisphere: flux =q2ϵ0= \dfrac{q}{2\epsilon_0}.

    Why: A hemisphere centred on the charge collects exactly half the solid angle, 2π out of 4π.

  3. Every line going downward leaves through the cone, whatever its height: Φcone=qϵ0−q2ϵ0=q2ϵ0=3q6ϵ0\Phi_{\text{cone}} = \dfrac{q}{\epsilon_0} - \dfrac{q}{2\epsilon_0} = \dfrac{q}{2\epsilon_0} = \dfrac{3q}{6\epsilon_0}.
  4. So n=3n = 3.
AnswerAnswer: 3
Ask about this question
Q7

Physics, Question 7 (3 marks)

Simple harmonic motion · +3 / −1
On a frictionless horizontal plane, a bob of mass m=0.1 kgm = 0.1\ \text{kg} is attached to a spring with natural length l0=0.1 ml_0 = 0.1\ \text{m}. The spring constant is k1=0.009 N m−1k_1 = 0.009\ \text{N m}^{-1} when the length of the spring l>l0l > l_0 and is k2=0.016 N m−1k_2 = 0.016\ \text{N m}^{-1} when l<l0l < l_0. Initially the bob is released from l=0.15 ml = 0.15\ \text{m}. Assume that Hooke's law remains valid throughout the motion. If the time period of the full oscillation is T=(nπ) sT = (n\pi)\ \text{s}, then the integer closest to nn is ______.

Tests: Find the period of an oscillator whose spring constant differs on the two sides of equilibrium.

Show solution
  1. The motion is two half-SHMs: stretched (constant k1k_1) and compressed (constant k2k_2), each lasting half its own period.

    Why: On each side of l₀ the force is linear, so that side is half of an ordinary SHM.

  2. T=πmk1+πmk2=π(0.10.009+0.10.016)T = \pi\sqrt{\dfrac{m}{k_1}} + \pi\sqrt{\dfrac{m}{k_2}} = \pi\left(\sqrt{\dfrac{0.1}{0.009}} + \sqrt{\dfrac{0.1}{0.016}}\right).
  3. =π(103+2.5)=5.83π= \pi\left(\dfrac{10}{3} + 2.5\right) = 5.83\pi s.
  4. n=5.83n = 5.83; the closest integer is 66.
AnswerAnswer: 6
Ask about this question
Q8

Physics, Question 8 (3 marks)

Ray optics (moving mirror) · +3 / −1
An object and a concave mirror of focal length f=10 cmf = 10\ \text{cm} both move along the principal axis of the mirror with constant speeds. The object moves with speed V0=15 cm s−1V_0 = 15\ \text{cm s}^{-1} towards the mirror with respect to a laboratory frame. The distance between the object and the mirror at a given moment is denoted by uu. When u=30 cmu = 30\ \text{cm}, the speed of the mirror VmV_m is such that the image is instantaneously at rest with respect to the laboratory frame, and the object forms a real image. The magnitude of VmV_m is ______ cm s−1\text{cm s}^{-1}. (The figure shows the object on the axis to the left of the mirror, moving right with V0V_0, at distance uu from the pole.)

Tests: Relate image and object velocities for a moving mirror by working in the mirror's frame.

Show solution
  1. Positions from the pole (light travels in +x+x): u=−30u = -30, f=−10f = -10. 1v=1f−1u=−110+130=−115\dfrac{1}{v} = \dfrac{1}{f} - \dfrac{1}{u} = -\dfrac{1}{10} + \dfrac{1}{30} = -\dfrac{1}{15}, so v=−15v = -15 cm (real image).
  2. Differentiating the mirror formula in the mirror's frame: vI/m=−v2u2 vO/m=−14 vO/mv_{I/m} = -\dfrac{v^2}{u^2}\,v_{O/m} = -\dfrac{1}{4}\,v_{O/m}.
  3. Let the mirror's lab velocity be VmV_m (along +x+x). vO/m=15−Vmv_{O/m} = 15 - V_m and, with the image at rest in the lab, vI/m=0−Vmv_{I/m} = 0 - V_m.
  4. −Vm=−14(15−Vm)⇒4Vm=15−Vm⇒Vm=3 cm s−1-V_m = -\dfrac{1}{4}(15 - V_m) \Rightarrow 4V_m = 15 - V_m \Rightarrow V_m = 3\ \text{cm s}^{-1} (the mirror moves away from the object).
AnswerAnswer: 3
Ask about this question

Physics, Section 2: 6 questions, one or more options correct: +4 if only (all) the correct options are chosen; +3 if all four are correct but only three are chosen; +2 if three or more are correct but only two are chosen, both correct; +1 if two or more are correct but only one is chosen and it is correct; 0 if unanswered; −2 in all other cases

Q9

Physics, Question 9 (4 marks)

Gauss's law · +4 / −2
In the figure, the inner (shaded) region AA represents a sphere of radius rA=1r_A = 1, within which the electrostatic charge density varies with the radial distance rr from the center as ρA=kr\rho_A = kr, where kk is positive. In the spherical shell BB of outer radius rBr_B, the electrostatic charge density varies as ρB=2kr\rho_B = \dfrac{2k}{r}. Assume that dimensions are taken care of. All physical quantities are in their SI units. (The figure shows the sphere AA of radius rAr_A and, around it and touching it, the shell BB from rAr_A to rBr_B.) Which of the following statement(s) is(are) correct?
  1. (A)If rB=32r_B = \sqrt{\dfrac{3}{2}}, then the electric field is zero everywhere outside BB.
  2. (B)If rB=32r_B = \dfrac{3}{2}, then the electric potential just outside BB is kϵ0\dfrac{k}{\epsilon_0}.
  3. (C)If rB=2r_B = 2, then the total charge of the configuration is 15πk15\pi k.
  4. (D)If rB=52r_B = \dfrac{5}{2}, then the magnitude of the electric field just outside BB is 13πkϵ0\dfrac{13\pi k}{\epsilon_0}.

Tests: Integrate a varying charge density to get the enclosed charge, then use the point-charge results outside.

Show solution
  1. QA=∫01kr⋅4πr2 dr=πkQ_A = \displaystyle\int_0^1 kr\cdot 4\pi r^2\,dr = \pi k. QB=∫1rB2kr⋅4πr2 dr=4πk(rB2−1)Q_B = \displaystyle\int_1^{r_B} \dfrac{2k}{r}\cdot 4\pi r^2\,dr = 4\pi k(r_B^2 - 1). Total Q=πk(4rB2−3)Q = \pi k(4r_B^2 - 3).
  2. (A) rB2=32r_B^2 = \tfrac{3}{2}: Q=3πk≠0Q = 3\pi k \ne 0, so the field outside is not zero. Both densities are positive; QQ can never vanish. False.
  3. (B) rB=32r_B = \tfrac{3}{2}: Q=6πkQ = 6\pi k, V=Q4πϵ0rB=6πk4πϵ0⋅1.5=kϵ0V = \dfrac{Q}{4\pi\epsilon_0 r_B} = \dfrac{6\pi k}{4\pi\epsilon_0\cdot 1.5} = \dfrac{k}{\epsilon_0}. True.
  4. (C) rB=2r_B = 2: Q=πk(16−3)=13πkQ = \pi k(16 - 3) = 13\pi k, not 15πk15\pi k. False.
  5. (D) rB=52r_B = \tfrac{5}{2}: Q=22πkQ = 22\pi k, E=22πk4πϵ0(25/4)=22k25ϵ0E = \dfrac{22\pi k}{4\pi\epsilon_0(25/4)} = \dfrac{22k}{25\epsilon_0}, not 13πkϵ0\dfrac{13\pi k}{\epsilon_0}. False.

    Why: 13πk is the total charge for r_B = 2, a distractor carried over from (C).

AnswerAnswer: (B)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Current electricity (power) · +4 / −2
In Circuit-1 and Circuit-2 shown in the figures, R1=1 ΩR_1 = 1\ \Omega, R2=2 ΩR_2 = 2\ \Omega and R3=3 ΩR_3 = 3\ \Omega. P1P_1 and P2P_2 are the power dissipations in Circuit-1 and Circuit-2 when the switches S1S_1 and S2S_2 are in open conditions, respectively. Q1Q_1 and Q2Q_2 are the power dissipations in Circuit-1 and Circuit-2 when the switches S1S_1 and S2S_2 are in closed conditions, respectively. (Circuit-1: between terminal AA and a node MM there is R1R_1, with switch S1S_1 connected directly across it; between MM and terminal BB there are two branches in parallel, R2R_2 and R3R_3 in series, and R1/2R_1/2. Circuit-2: R1R_1, R2R_2, R3R_3 and the series pair S2S_2–2R32R_3 are all connected in parallel between AA and BB.) Which of the following statement(s) is(are) correct?
  1. (A)When a voltage source of 6 V6\ \text{V} is connected across A and B in both circuits, P1<P2P_1 < P_2.
  2. (B)When a constant current source of 2 Amp2\ \text{Amp} is connected across A and B in both circuits, P1>P2P_1 > P_2.
  3. (C)When a voltage source of 6 V6\ \text{V} is connected across A and B in Circuit-1, Q1>P1Q_1 > P_1.
  4. (D)When a constant current source of 2 Amp2\ \text{Amp} is connected across A and B in both circuits, Q2<Q1Q_2 < Q_1.

Tests: Reduce two networks with switches and compare powers under a fixed voltage and a fixed current.

Show solution
  1. Circuit-1: R2+R3=5 ΩR_2 + R_3 = 5\ \Omega in parallel with 0.5 Ω0.5\ \Omega gives 5×0.55.5=511 Ω\dfrac{5 \times 0.5}{5.5} = \dfrac{5}{11}\ \Omega. S1S_1 open: Ropen=1+511=1611 ΩR_{\text{open}} = 1 + \dfrac{5}{11} = \dfrac{16}{11}\ \Omega. S1S_1 closed (shorts R1R_1): Rclosed=511 ΩR_{\text{closed}} = \dfrac{5}{11}\ \Omega.
  2. Circuit-2: S2S_2 open: 1R=1+12+13=116\dfrac{1}{R} = 1 + \dfrac{1}{2} + \dfrac{1}{3} = \dfrac{11}{6}, R=611 ΩR = \dfrac{6}{11}\ \Omega. S2S_2 closed adds 6 Ω6\ \Omega: 1R=116+16=2\dfrac{1}{R} = \dfrac{11}{6} + \dfrac{1}{6} = 2, R=12 ΩR = \dfrac{1}{2}\ \Omega.
  3. (A) P=V2/RP = V^2/R: P1=36⋅1116=24.75P_1 = 36\cdot\dfrac{11}{16} = 24.75 W, P2=36⋅116=66P_2 = 36\cdot\dfrac{11}{6} = 66 W. P1<P2P_1 < P_2. True.
  4. (B) P=I2RP = I^2R: P1=4⋅1611=5.82P_1 = 4\cdot\dfrac{16}{11} = 5.82 W, P2=4⋅611=2.18P_2 = 4\cdot\dfrac{6}{11} = 2.18 W. P1>P2P_1 > P_2. True.
  5. (C) Q1=36⋅115=79.2Q_1 = 36\cdot\dfrac{11}{5} = 79.2 W >P1=24.75> P_1 = 24.75 W. True.
  6. (D) Q1=4⋅511=1.82Q_1 = 4\cdot\dfrac{5}{11} = 1.82 W, Q2=4⋅12=2Q_2 = 4\cdot\dfrac{1}{2} = 2 W. Q2>Q1Q_2 > Q_1, so "Q2<Q1Q_2 < Q_1" is false.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q11

Physics, Question 11 (4 marks)

Surface tension and thermodynamics · +4 / −2
A bubble has surface tension SS. The ideal gas inside the bubble has ratio of specific heats γ=53\gamma = \dfrac{5}{3}. The bubble is exposed to the atmosphere and it always retains its spherical shape. When the atmospheric pressure is Pa1P_{a1}, the radius of the bubble is found to be r1r_1 and the temperature of the enclosed gas is T1T_1. When the atmospheric pressure is Pa2P_{a2}, the radius of the bubble and the temperature of the enclosed gas are r2r_2 and T2T_2, respectively. Which of the following statement(s) is(are) correct?
  1. (A)If the surface of the bubble is a perfect heat insulator, then (r1r2)5=Pa2+2Sr2Pa1+2Sr1\left(\dfrac{r_1}{r_2}\right)^5 = \dfrac{P_{a2} + \dfrac{2S}{r_2}}{P_{a1} + \dfrac{2S}{r_1}}.
  2. (B)If the surface of the bubble is a perfect heat insulator, then the total internal energy of the bubble including its surface energy does not change with the external atmospheric pressure.
  3. (C)If the surface of the bubble is a perfect heat conductor and the change in atmospheric temperature is negligible, then (r1r2)3=Pa2+4Sr2Pa1+4Sr1\left(\dfrac{r_1}{r_2}\right)^3 = \dfrac{P_{a2} + \dfrac{4S}{r_2}}{P_{a1} + \dfrac{4S}{r_1}}.
  4. (D)If the surface of the bubble is a perfect heat insulator, then (T2T1)5/2=Pa2+4Sr2Pa1+4Sr1\left(\dfrac{T_2}{T_1}\right)^{5/2} = \dfrac{P_{a2} + \dfrac{4S}{r_2}}{P_{a1} + \dfrac{4S}{r_1}}.

Tests: Combine the excess pressure of a soap bubble with adiabatic and isothermal gas laws.

Show solution
  1. A bubble in the atmosphere (a soap bubble) has two surfaces, so the gas pressure is P=Pa+4SrP = P_a + \dfrac{4S}{r}. Its volume V∝r3V \propto r^3.

    Why: A bubble inside a liquid has one surface (2S/r); one in air has an inner and an outer film (4S/r).

  2. (A) Adiabatic: PVγ=PV^{\gamma} = const, V5/3∝r5V^{5/3} \propto r^5, so (r1r2)5=P2P1\left(\dfrac{r_1}{r_2}\right)^5 = \dfrac{P_2}{P_1} with P=Pa+4S/rP = P_a + 4S/r, not 2S/r2S/r. False.
  3. (B) Gas work: P dV=Pa dV+4Sr 4πr2 dr=Pa dV+d(8πSr2)P\,dV = P_a\,dV + \dfrac{4S}{r}\,4\pi r^2\,dr = P_a\,dV + d(8\pi S r^2), and 8πSr28\pi Sr^2 is the surface energy (two films). With dQ=0dQ = 0: d(Ugas+8πSr2)=−Pa dV≠0d(U_{\text{gas}} + 8\pi Sr^2) = -P_a\,dV \ne 0. The atmosphere does work, so the total changes. False.
  4. (C) Isothermal: PV=PV = const, so (r1r2)3=Pa2+4S/r2Pa1+4S/r1\left(\dfrac{r_1}{r_2}\right)^3 = \dfrac{P_{a2} + 4S/r_2}{P_{a1} + 4S/r_1}. True.
  5. (D) Adiabatic in terms of TT: P1−γTγ=P^{1-\gamma}T^{\gamma} = const ⇒T5/3∝P2/3⇒T5/2∝P\Rightarrow T^{5/3} \propto P^{2/3} \Rightarrow T^{5/2} \propto P. So (T2T1)5/2=Pa2+4S/r2Pa1+4S/r1\left(\dfrac{T_2}{T_1}\right)^{5/2} = \dfrac{P_{a2} + 4S/r_2}{P_{a1} + 4S/r_1}. True.
AnswerAnswer: (C), (D)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Electric potential and energy · +4 / −2
A disk of radius R with uniform positive charge density σ\sigma is placed on the xyxy plane with its center at the origin. The Coulomb potential along the zz-axis is V(z)=σ2ϵ0(R2+z2−z)V(z) = \dfrac{\sigma}{2\epsilon_0}\left(\sqrt{R^2 + z^2} - z\right). A particle of positive charge qq is placed initially at rest at a point on the zz axis with z=z0z = z_0 and z0>0z_0 > 0. In addition to the Coulomb force, the particle experiences a vertical force F⃗=−ck^\vec{F} = -c\hat{k} with c>0c > 0. Let β=2cϵ0qσ\beta = \dfrac{2c\epsilon_0}{q\sigma}. Which of the following statement(s) is(are) correct?
  1. (A)For β=14\beta = \dfrac{1}{4} and z0=257Rz_0 = \dfrac{25}{7}R, the particle reaches the origin.
  2. (B)For β=14\beta = \dfrac{1}{4} and z0=37Rz_0 = \dfrac{3}{7}R, the particle reaches the origin.
  3. (C)For β=14\beta = \dfrac{1}{4} and z0=R3z_0 = \dfrac{R}{\sqrt{3}}, the particle returns back to z=z0z = z_0.
  4. (D)For β>1\beta > 1 and z0>0z_0 > 0, the particle always reaches the origin.

Tests: Use an energy curve with a stable minimum to decide whether a charge starting from rest reaches a point.

Show solution
  1. Potential energy: U(z)=qV(z)+cz=cβ[R2+z2−z+βz]U(z) = qV(z) + cz = \dfrac{c}{\beta}\left[\sqrt{R^2 + z^2} - z + \beta z\right]. Write u(z)=R2+z2−(1−β)zu(z) = \sqrt{R^2 + z^2} - (1 - \beta)z, so U∝uU \propto u.

    Why: qσ/(2ε₀) = c/β by the definition of β.

  2. For β=14\beta = \tfrac14: u=R2+z2−34zu = \sqrt{R^2 + z^2} - \tfrac34 z. u′(z)=0u'(z) = 0 at zR2+z2=34⇒z=3R7\dfrac{z}{\sqrt{R^2 + z^2}} = \dfrac{3}{4} \Rightarrow z = \dfrac{3R}{\sqrt{7}}, a minimum (stable point). u(0)=Ru(0) = R. The particle reaches the origin only if u(z0)≥u(0)=Ru(z_0) \ge u(0) = R.

    Why: Starting from rest, it can only go where U is below its starting value.

  3. (A) z0=257Rz_0 = \tfrac{25}{7}R: u=R(6747−7528)=R(3.709−2.679)=1.030R>Ru = R\left(\dfrac{\sqrt{674}}{7} - \dfrac{75}{28}\right) = R(3.709 - 2.679) = 1.030R > R. It passes the minimum and still has energy at z=0z = 0: reaches the origin. True.
  4. (B) z0=37Rz_0 = \tfrac{3}{7}R: u=R(587−928)=R(1.088−0.321)=0.766R<Ru = R\left(\dfrac{\sqrt{58}}{7} - \dfrac{9}{28}\right) = R(1.088 - 0.321) = 0.766R < R. It oscillates about 3R/73R/\sqrt{7} and never reaches 00. False.
  5. (C) z0=R/3z_0 = R/\sqrt{3}: u=R(23−343)=5R43=0.722R<Ru = R\left(\dfrac{2}{\sqrt{3}} - \dfrac{3}{4\sqrt{3}}\right) = \dfrac{5R}{4\sqrt{3}} = 0.722R < R. Bounded motion about the minimum: it oscillates and returns to z0z_0. True.
  6. (D) β>1\beta > 1: u′(z)=zR2+z2−1+β>β−1>0u'(z) = \dfrac{z}{\sqrt{R^2 + z^2}} - 1 + \beta > \beta - 1 > 0 for all z≥0z \ge 0. UU rises steadily with zz, so the net force always points down and the particle always reaches the origin. True.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Wave optics (interference) · +4 / −2
A double slit setup is shown in the figure. One of the slits is in medium 2 of refractive index n2n_2. The other slit is at the interface of this medium with another medium 1 of refractive index n1 (≠n2)n_1\ (\ne n_2). The line joining the slits is perpendicular to the interface and the distance between the slits is dd. The slit widths are much smaller than dd. A monochromatic parallel beam of light is incident on the slits from medium 1. A detector is placed in medium 2 at a large distance from the slits, and at an angle θ\theta from the line joining them, so that θ\theta equals the angle of refraction of the beam. Consider two approximately parallel rays from the slits received by the detector. (The figure shows medium 1 above a horizontal interface and medium 2 below it; the slit screen is vertical, one slit at the interface and the other a distance dd below it in medium 2; the beam comes in obliquely from the upper left, and the detector is on the right, below, at angle θ\theta to the vertical line through the slits.) Which of the following statement(s) is(are) correct?
  1. (A)The phase difference between the two rays is independent of dd.
  2. (B)The two rays interfere constructively at the detector.
  3. (C)The phase difference between the two rays depends on n1n_1 but is independent of n2n_2.
  4. (D)The phase difference between the two rays vanishes only for certain values of dd and the angle of incidence of the beam, with θ\theta being the corresponding angle of refraction.

Tests: Add optical path differences before and after the slits when the incident beam is oblique.

Show solution
  1. Before the slits: the refracted beam travels in medium 2 at angle θ\theta to the line of the slits. To reach the lower slit it goes an extra dcos⁡θd\cos\theta in medium 2: extra optical path n2dcos⁡θn_2 d\cos\theta for the lower slit.

    Why: Along the beam direction, the lower slit lies d cos θ further on than the upper one.

  2. After the slits: the detector direction also makes angle θ\theta with the line of the slits and points down, away from medium 1. Now the ray from the upper slit goes an extra dcos⁡θd\cos\theta in medium 2: extra optical path n2dcos⁡θn_2 d\cos\theta for the upper slit.
  3. Net optical path difference: n2dcos⁡θ−n2dcos⁡θ=0n_2 d\cos\theta - n_2 d\cos\theta = 0. The phase difference is zero for every dd, n1n_1, n2n_2 and angle of incidence.
  4. (A) Independent of dd: true. (B) Zero phase difference means constructive interference: true. (C) It depends on neither n1n_1 nor n2n_2: false. (D) It vanishes for all values, not only certain ones: false.
AnswerAnswer: (A), (B)
Ask about this question
Q14

Physics, Question 14 (4 marks)

Thermodynamic processes · +4 / −2
In the given PP-VV diagram, a monoatomic gas (γ=53)\left(\gamma = \dfrac{5}{3}\right) is first compressed adiabatically from state AA to state BB. Then it expands isothermally from state BB to state CC. [Given: (13)0.6≃0.5\left(\dfrac{1}{3}\right)^{0.6} \simeq 0.5, ln⁡2≃0.7\ln 2 \simeq 0.7]. (The figure shows PP in kPa against VV in m3\text{m}^3: AA at P=100P = 100 kPa, V=0.80 m3V = 0.80\ \text{m}^3; BB on the 300300 kPa line at a smaller volume; CC directly above AA at V=0.80 m3V = 0.80\ \text{m}^3, joined to AA by a vertical line.) Which of the following statement(s) is(are) correct?
  1. (A)The magnitude of the total work done in the process A→B→CA \rightarrow B \rightarrow C is 144 kJ144\ \text{kJ}.
  2. (B)The magnitude of the work done in the process B→CB \rightarrow C is 84 kJ84\ \text{kJ}.
  3. (C)The magnitude of the work done in the process A→BA \rightarrow B is 60 kJ60\ \text{kJ}.
  4. (D)The magnitude of the work done in the process C→AC \rightarrow A is zero.

Tests: Compute work in adiabatic, isothermal and isochoric steps from a P-V diagram.

Show solution
  1. Adiabatic A→BA \rightarrow B: VB=VA(PAPB)1/γ=0.8(13)0.6=0.4 m3V_B = V_A\left(\dfrac{P_A}{P_B}\right)^{1/\gamma} = 0.8\left(\dfrac{1}{3}\right)^{0.6} = 0.4\ \text{m}^3.
  2. (C) ∣WAB∣=PBVB−PAVAγ−1=(300)(0.4)−(100)(0.8)2/3 kJ=402/3=60 kJ|W_{AB}| = \dfrac{P_BV_B - P_AV_A}{\gamma - 1} = \dfrac{(300)(0.4) - (100)(0.8)}{2/3}\ \text{kJ} = \dfrac{40}{2/3} = 60\ \text{kJ} (done on the gas). True.
  3. (B) Isothermal B→CB \rightarrow C to VC=0.8 m3V_C = 0.8\ \text{m}^3: WBC=PBVBln⁡VCVB=120×ln⁡2=120×0.7=84 kJW_{BC} = P_BV_B\ln\dfrac{V_C}{V_B} = 120 \times \ln 2 = 120 \times 0.7 = 84\ \text{kJ}. True.
  4. (D) C→AC \rightarrow A is at constant volume (0.8 m30.8\ \text{m}^3): no work. True.

    Why: Here P_C = 120/0.8 = 150 kPa; the figure draws C higher, but the processes fix the work.

  5. (A) WA→B→C=−60+84=24 kJW_{A \rightarrow B \rightarrow C} = -60 + 84 = 24\ \text{kJ}, not 144144 kJ (144=60+84144 = 60 + 84 adds the magnitudes). False.
AnswerAnswer: (B), (C), (D)
Ask about this question

Physics, Section 3: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Physics, Question 15 (3 marks)

Rotational dynamics (angular momentum) · +3 / −1
A flat surface of a thin uniform disk AA of radius RR is glued to a horizontal table. Another thin uniform disk BB of mass MM and with the same radius RR rolls without slipping on the circumference of AA, as shown in the figure. A flat surface of BB also lies on the plane of the table. The center of mass of BB has fixed angular speed ω\omega about the vertical axis passing through the center of AA. The angular momentum of BB is nMωR2nM\omega R^2 with respect to the center of AA. Which of the following is the value of nn? (The figure shows the two equal disks touching edge to edge on the table, BB moving round AA as the arrow shows.)
  1. (A)2
  2. (B)5
  3. (C)72\dfrac{7}{2}
  4. (D)92\dfrac{9}{2}

Tests: Split the angular momentum of a rolling body into orbital and spin parts, with the right spin rate.

Show solution
  1. The centre of BB moves on a circle of radius 2R2R at angular speed ω\omega: vcm=2Rωv_{\text{cm}} = 2R\omega.
  2. No slipping: the contact point of BB is at rest (it touches the fixed disk). So vcm=ΩR⇒Ω=2ωv_{\text{cm}} = \Omega R \Rightarrow \Omega = 2\omega, in the same sense as ω\omega.

    Why: A coin rolled once round an equal coin turns twice.

  3. L=M(2R)2ω+MR22(2ω)=4MR2ω+MR2ω=5MR2ωL = M(2R)^2\omega + \dfrac{MR^2}{2}(2\omega) = 4MR^2\omega + MR^2\omega = 5MR^2\omega.

    Why: Angular momentum = orbital part of the centre of mass + spin about the centre of mass.

  4. So n=5n = 5.
AnswerAnswer: (B) 5
Ask about this question
Q16

Physics, Question 16 (3 marks)

Photoelectric effect · +3 / −1
When light of a given wavelength is incident on a metallic surface, the minimum potential needed to stop the emitted photoelectrons is 6.0 V6.0\ \text{V}. This potential drops to 0.6 V0.6\ \text{V} if another source with wavelength four times that of the first one and intensity half of the first one is used. What are the wavelength of the first source and the work function of the metal, respectively? [Take hce=1.24×10−6 J m C−1\dfrac{hc}{e} = 1.24 \times 10^{-6}\ \text{J m C}^{-1}.]
  1. (A)1.72×10−71.72 \times 10^{-7} m, 1.201.20 eV
  2. (B)1.72×10−71.72 \times 10^{-7} m, 5.605.60 eV
  3. (C)3.78×10−73.78 \times 10^{-7} m, 5.605.60 eV
  4. (D)3.78×10−73.78 \times 10^{-7} m, 1.201.20 eV

Tests: Use two stopping potentials to find a photon energy and a work function.

Show solution
  1. Einstein's equation in volts: Vs=hceλ−ϕeV_s = \dfrac{hc}{e\lambda} - \dfrac{\phi}{e}. Intensity does not affect VsV_s.
  2. 6.0=E−ϕ6.0 = E - \phi and 0.6=E4−ϕ0.6 = \dfrac{E}{4} - \phi, where E=hceλE = \dfrac{hc}{e\lambda} in volts.
  3. Subtract: 5.4=3E4⇒E=7.25.4 = \dfrac{3E}{4} \Rightarrow E = 7.2 V, so ϕ=7.2−6.0=1.2\phi = 7.2 - 6.0 = 1.2 eV.
  4. λ=1.24×10−67.2=1.72×10−7\lambda = \dfrac{1.24 \times 10^{-6}}{7.2} = 1.72 \times 10^{-7} m.
AnswerAnswer: (A) 1.72×10−71.72 \times 10^{-7} m, 1.201.20 eV
Ask about this question
Q17

Physics, Question 17 (3 marks)

Screw gauge and errors · +3 / −1
Area of the cross-section of a wire is measured using a screw gauge. The pitch of the main scale is 0.50.5 mm. The circular scale has 100100 divisions and for one full rotation of the circular scale, the main scale shifts by two divisions. The measured readings are listed below. What are the diameter and cross-sectional area of the wire measured using the screw gauge?
Measurement conditionMain scale readingCircular scale reading
Two arms of gauge touching each other without wire0 division4 divisions
Attempt-1: With wire4 divisions20 divisions
Attempt-2: With wire4 divisions16 divisions
  1. (A)2.22±0.022.22 \pm 0.02 mm, π(1.23±0.02) mm2\pi(1.23 \pm 0.02)\ \text{mm}^2
  2. (B)2.22±0.012.22 \pm 0.01 mm, π(1.23±0.01) mm2\pi(1.23 \pm 0.01)\ \text{mm}^2
  3. (C)2.14±0.022.14 \pm 0.02 mm, π(1.14±0.02) mm2\pi(1.14 \pm 0.02)\ \text{mm}^2
  4. (D)2.14±0.012.14 \pm 0.01 mm, π(1.14±0.01) mm2\pi(1.14 \pm 0.01)\ \text{mm}^2

Tests: Read a screw gauge with zero error and quote the mean and its error from repeated readings.

Show solution
  1. One main-scale division is 0.50.5 mm, and one rotation moves the main scale by two divisions, so the screw advances 1.01.0 mm per rotation. Least count =1.0100=0.01= \dfrac{1.0}{100} = 0.01 mm.

    Why: The least count is the advance per rotation divided by the circular divisions, not the main-scale division.

  2. Zero error: 0+4×0.01=+0.040 + 4 \times 0.01 = +0.04 mm, so subtract 0.040.04 mm from each reading.
  3. Attempt 1: 4×0.5+20×0.01−0.04=2.164 \times 0.5 + 20 \times 0.01 - 0.04 = 2.16 mm. Attempt 2: 2.0+0.16−0.04=2.122.0 + 0.16 - 0.04 = 2.12 mm. Mean d=2.14d = 2.14 mm.
  4. Error: each reading differs from the mean by 0.020.02 mm, so the mean absolute error is 0.020.02 mm, larger than the least count. d=2.14±0.02d = 2.14 \pm 0.02 mm.

    Why: With repeated readings, the error is the scatter about the mean when it exceeds the least count.

  5. Area =π(d2)2=π(1.07)2=π(1.145)= \pi\left(\dfrac{d}{2}\right)^2 = \pi(1.07)^2 = \pi(1.145) mm². Δ(r2)=2r Δr=2(1.07)(0.01)=0.02\Delta(r^2) = 2r\,\Delta r = 2(1.07)(0.01) = 0.02. So area =π(1.14±0.02) mm2= \pi(1.14 \pm 0.02)\ \text{mm}^2, option (C). (D) pairs the right values with the least count as the error.
  6. About the published key: it answers "none of the options" and treats the question as a bonus. It took 0.50.5 mm as the advance per rotation, so each main-scale division became 0.250.25 mm and d=1.07±0.01d = 1.07 \pm 0.01 mm. But the paper calls 0.50.5 mm the pitch of the main scale and says the main scale shifts by two divisions per rotation; read that way, option (C) is right.
AnswerAnswer: (C) 2.14±0.022.14 \pm 0.02 mm, π(1.14±0.02) mm2\pi(1.14 \pm 0.02)\ \text{mm}^2 (the published key treats this question as a bonus)
Ask about this question
Q18

Physics, Question 18 (3 marks)

Magnetic field (Biot-Savart law) · +3 / −1
Which one of the following options represents the magnetic field B⃗\vec{B} at O due to the current flowing in the given wire segments lying on the xyxy plane? (The figure, with i^\hat{i} to the right, j^\hat{j} up and k^\hat{k} out of the page, shows, in order along the current II: a straight wire of length LL carrying II upward whose top end is level with O and at distance LL to its left; a horizontal piece of length L/2L/2 along the line through O, carrying II to the right; a semicircle of radius L/2L/2 centred at O, above the line, traversed from left to right over the top; a quarter circle of radius L/4L/4 centred at O, from the point L/4L/4 to the right of O down to the point L/4L/4 below O; and a straight wire of length 3L/43L/4 from there straight down, carrying II downward. The straight dashed line through O is not a wire segment.)
  1. (A)B⃗=−μ0IL(32+142π)k^\vec{B} = \dfrac{-\mu_0 I}{L}\left(\dfrac{3}{2} + \dfrac{1}{4\sqrt{2}\pi}\right)\hat{k}
  2. (B)B⃗=−μ0IL(32+122π)k^\vec{B} = -\dfrac{\mu_0 I}{L}\left(\dfrac{3}{2} + \dfrac{1}{2\sqrt{2}\pi}\right)\hat{k}
  3. (C)B⃗=−μ0IL(1+142π)k^\vec{B} = \dfrac{-\mu_0 I}{L}\left(1 + \dfrac{1}{4\sqrt{2}\pi}\right)\hat{k}
  4. (D)B⃗=−μ0IL(1+14π)k^\vec{B} = \dfrac{-\mu_0 I}{L}\left(1 + \dfrac{1}{4\pi}\right)\hat{k}

Tests: Add the fields of straight and circular-arc segments at a point, with directions.

Show solution
  1. The L/2L/2 piece and the 3L/43L/4 wire both lie on lines through O: no field at O.

    Why: dl × r = 0 when O is on the line of the current.

  2. Vertical wire of length LL at distance LL, one end level with O: B=μ0I4πL(sin⁡0∘+sin⁡45∘)=μ0I42πLB = \dfrac{\mu_0 I}{4\pi L}(\sin 0^\circ + \sin 45^\circ) = \dfrac{\mu_0 I}{4\sqrt{2}\pi L}. Current up, O to its right: j^×i^=−k^\hat{j} \times \hat{i} = -\hat{k}.
  3. Semicircle of radius L/2L/2, clockwise as seen from +k^+\hat{k}: B=μ0I4(L/2)=μ0I2LB = \dfrac{\mu_0 I}{4(L/2)} = \dfrac{\mu_0 I}{2L}, along −k^-\hat{k}.
  4. Quarter circle of radius L/4L/4, from the right point down to the bottom point (also clockwise): B=14⋅μ0I2(L/4)=μ0I2LB = \dfrac{1}{4}\cdot\dfrac{\mu_0 I}{2(L/4)} = \dfrac{\mu_0 I}{2L}, along −k^-\hat{k}.
  5. Total: B⃗=−μ0IL(12+12+142π)k^=−μ0IL(1+142π)k^\vec{B} = -\dfrac{\mu_0 I}{L}\left(\dfrac{1}{2} + \dfrac{1}{2} + \dfrac{1}{4\sqrt{2}\pi}\right)\hat{k} = -\dfrac{\mu_0 I}{L}\left(1 + \dfrac{1}{4\sqrt{2}\pi}\right)\hat{k}.
AnswerAnswer: (C) B⃗=−μ0IL(1+142π)k^\vec{B} = -\dfrac{\mu_0 I}{L}\left(1 + \dfrac{1}{4\sqrt{2}\pi}\right)\hat{k}
Ask about this question

Chemistry, Section 1: 8 questions, answer is a single digit integer from 0 to 9: +3 if only the correct integer is entered, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Ionic equilibrium (solubility product, common ion) · +3 / −1
Concentration of H2SO4\mathrm{H_2SO_4} and Na2SO4\mathrm{Na_2SO_4} in a solution is 1 M and 1.8×10−21.8 \times 10^{-2} M, respectively. Molar solubility of PbSO4\mathrm{PbSO_4} in the same solution is X×10−Y\mathrm{X} \times 10^{-\mathrm{Y}} M (expressed in scientific notation). The value of Y is ______. [Given: Solubility product of PbSO4\mathrm{PbSO_4} (KspK_{sp}) =1.6×10−8= 1.6 \times 10^{-8}. For H2SO4\mathrm{H_2SO_4}, Ka1K_{a1} is very large and Ka2=1.2×10−2K_{a2} = 1.2 \times 10^{-2}]

Tests: Find the free sulfate ion concentration set by the HSO4⁻ equilibrium, then use Ksp.

Show solution
  1. The first ionisation is complete: 1 M H2SO4\mathrm{H_2SO_4} gives 1 M H+\mathrm{H^+} and 1 M HSO4−\mathrm{HSO_4^-}. Na2SO4\mathrm{Na_2SO_4} adds 0.018 M SO42−\mathrm{SO_4^{2-}}.
  2. Second step: HSO4−⇌H++SO42−\mathrm{HSO_4^- \rightleftharpoons H^+ + SO_4^{2-}}, Ka2=0.012K_{a2} = 0.012. The starting quotient (1)(0.018)1=0.018>0.012\dfrac{(1)(0.018)}{1} = 0.018 > 0.012, so the equilibrium shifts back: xx M of sulfate takes up H+\mathrm{H^+}.

    Why: The large H+ concentration suppresses the second ionisation and even pulls added sulfate back to HSO4−.

  3. (1−x)(0.018−x)1+x=0.012⇒x2−1.03x+0.006=0⇒x≈0.0059\dfrac{(1 - x)(0.018 - x)}{1 + x} = 0.012 \Rightarrow x^2 - 1.03x + 0.006 = 0 \Rightarrow x \approx 0.0059, so [SO42−]≈0.018−0.0059=0.0121[\mathrm{SO_4^{2-}}] \approx 0.018 - 0.0059 = 0.0121 M.

    Why: Since [H+] ≈ [HSO4−] ≈ 1 M, [SO4²⁻] ≈ Ka2 = 0.012 M, which the exact solution confirms.

  4. Molar solubility s=Ksp[SO42−]=1.6×10−81.2×10−2≈1.3×10−6s = \dfrac{K_{sp}}{[\mathrm{SO_4^{2-}}]} = \dfrac{1.6 \times 10^{-8}}{1.2 \times 10^{-2}} \approx 1.3 \times 10^{-6} M (the sulfate from PbSO4\mathrm{PbSO_4} itself is negligible).
  5. So X≈1.3\mathrm{X} \approx 1.3 and Y=6\mathrm{Y} = 6.
AnswerAnswer: 6
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Solutions (relative lowering of vapour pressure) · +3 / −1
An aqueous solution is prepared by dissolving 0.1 mol of an ionic salt in 1.8 kg of water at 35 ∘^\circC. The salt remains 90% dissociated in the solution. The vapour pressure of the solution is 59.724 mm of Hg. Vapor pressure of water at 35 ∘^\circC is 60.000 mm of Hg. The number of ions present per formula unit of the ionic salt is ______.

Tests: Get the van 't Hoff factor from vapour-pressure lowering and turn it into ions per formula unit.

Show solution
  1. Moles of water =1800/18=100= 1800/18 = 100. Raoult's law with the van 't Hoff factor: pp0=nwaternwater+i nsalt\dfrac{p}{p^0} = \dfrac{n_{\mathrm{water}}}{n_{\mathrm{water}} + i\,n_{\mathrm{salt}}}.
  2. 59.72460.000=100100+0.1i⇒100+0.1i=100.462⇒i≈4.62\dfrac{59.724}{60.000} = \dfrac{100}{100 + 0.1i} \Rightarrow 100 + 0.1i = 100.462 \Rightarrow i \approx 4.62. (The dilute form Δpp0=i nN\dfrac{\Delta p}{p^0} = \dfrac{i\,n}{N} gives 0.27660=0.0046=0.1i100\dfrac{0.276}{60} = 0.0046 = \dfrac{0.1i}{100}, i=4.6i = 4.6.)
  3. For a salt giving yy ions per formula unit and degree of dissociation α\alpha: i=1+(y−1)αi = 1 + (y - 1)\alpha.
  4. 4.6=1+0.9(y−1)⇒y−1=4⇒y=54.6 = 1 + 0.9(y - 1) \Rightarrow y - 1 = 4 \Rightarrow y = 5.
AnswerAnswer: 5
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Electrochemistry (Kohlrausch's law) · +3 / −1
Consider the strong electrolytes ZmXn\mathrm{Z_mX_n}, UmYp\mathrm{U_mY_p} and VmXn\mathrm{V_mX_n}. Limiting molar conductivity (Λ0\Lambda^0) of UmYp\mathrm{U_mY_p} and VmXn\mathrm{V_mX_n} are 250 and 440 S cm2 mol−1\text{S cm}^2\ \text{mol}^{-1}, respectively. The value of (m+n+p)(m + n + p) is ______. Given: the limiting molar conductivities λ0\lambda^0 of the ions (table below). The plot of molar conductivity (Λ\Lambda) of ZmXn\mathrm{Z_mX_n} vs c1/2c^{1/2} is given below. (The figure shows Λ\Lambda of ZmXn\mathrm{Z_mX_n} in S cm2 mol−1\text{S cm}^2\ \text{mol}^{-1} against c1/2c^{1/2} in (mol L−1)1/2(\text{mol L}^{-1})^{1/2}: a falling straight line, with dashed guides marking Λ=339\Lambda = 339 at c1/2=0.01c^{1/2} = 0.01 and Λ=336\Lambda = 336 at c1/2=0.04c^{1/2} = 0.04, and equally spaced guides at 0.02 and 0.03 in between.)
IonZn+\mathrm{Z^{n+}}Up+\mathrm{U^{p+}}Vn+\mathrm{V^{n+}}Xm−\mathrm{X^{m-}}Ym−\mathrm{Y^{m-}}
λ0\lambda^0 (S cm2 mol−1\text{S cm}^2\ \text{mol}^{-1})50.025.0100.080.0100.0

Tests: Read Λ° from a Kohlrausch plot and use ionic conductivities weighted by the number of each ion.

Show solution
  1. Strong electrolyte: Λ=Λ0−Ac\Lambda = \Lambda^0 - A\sqrt{c}. Slope =336−3390.04−0.01=−100= \dfrac{336 - 339}{0.04 - 0.01} = -100, so Λ0(ZmXn)=339+100(0.01)=340 S cm2 mol−1\Lambda^0(\mathrm{Z_mX_n}) = 339 + 100(0.01) = 340\ \text{S cm}^2\ \text{mol}^{-1}.

    Why: The intercept at c = 0 is the limiting molar conductivity.

  2. Kohlrausch's law, counting ions per formula unit: Λ0(ZmXn)=mλ0(Zn+)+nλ0(Xm−)\Lambda^0(\mathrm{Z_mX_n}) = m\lambda^0(\mathrm{Z^{n+}}) + n\lambda^0(\mathrm{X^{m-}}): 50m+80n=34050m + 80n = 340.
  3. Λ0(VmXn)=100m+80n=440\Lambda^0(\mathrm{V_mX_n}) = 100m + 80n = 440. Subtracting: 50m=10050m = 100, so m=2m = 2 and 80n=24080n = 240, n=3n = 3.
  4. Λ0(UmYp)=25m+100p=250⇒50+100p=250⇒p=2\Lambda^0(\mathrm{U_mY_p}) = 25m + 100p = 250 \Rightarrow 50 + 100p = 250 \Rightarrow p = 2.
  5. m+n+p=2+3+2=7m + n + p = 2 + 3 + 2 = 7.
AnswerAnswer: 7
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

p-Block elements (xenon fluorides) · +3 / −1
The reaction of Xe and O2F2\mathrm{O_2F_2} gives a Xe compound P. The number of moles of HF produced by the complete hydrolysis of 1 mol of P is ______.

Tests: Identify the xenon fluoride formed and balance its hydrolysis.

Show solution
  1. Dioxygen difluoride is a powerful fluorinating agent; with xenon it gives xenon difluoride: Xe+O2F2→XeF2+O2\mathrm{Xe + O_2F_2 \rightarrow XeF_2 + O_2}. So P = XeF2\mathrm{XeF_2}.
  2. Hydrolysis of XeF2\mathrm{XeF_2}: 2XeF2+2H2O→2Xe+4HF+O2\mathrm{2XeF_2 + 2H_2O \rightarrow 2Xe + 4HF + O_2}.
  3. So 1 mol XeF2\mathrm{XeF_2} gives 2 mol HF (one HF per fluorine atom).
AnswerAnswer: 2
Ask about this question
Q5

Chemistry, Question 5 (3 marks)

Chemical bonding (molecular orbital theory) · +3 / −1
Thermal decomposition of AgNO3\mathrm{AgNO_3} produces two paramagnetic gases. The total number of electrons present in the antibonding molecular orbitals of the gas that has the higher number of unpaired electrons is ______.

Tests: Write the decomposition, pick O2 by its unpaired electrons, and count antibonding electrons in its MO configuration.

Show solution
  1. 2AgNO3→Δ2Ag+2NO2+O2\mathrm{2AgNO_3 \xrightarrow{\Delta} 2Ag + 2NO_2 + O_2}. Both gases are paramagnetic: NO2\mathrm{NO_2} (odd electron, 1 unpaired) and O2\mathrm{O_2} (2 unpaired).
  2. So the gas is O2\mathrm{O_2} (16 electrons): σ1s2 σ∗1s2 σ2s2 σ∗2s2 σ2pz2 π2px2 π2py2 π∗2px1 π∗2py1\sigma 1s^2\,\sigma^* 1s^2\,\sigma 2s^2\,\sigma^* 2s^2\,\sigma 2p_z^2\,\pi 2p_x^2\,\pi 2p_y^2\,\pi^* 2p_x^1\,\pi^* 2p_y^1.
  3. Antibonding electrons: σ∗1s\sigma^* 1s (2) + σ∗2s\sigma^* 2s (2) + π∗2p\pi^* 2p (2) = 6.

    Why: The question asks for all electrons in antibonding MOs, so the core σ*1s pair counts; valence antibonding alone would be 4.

AnswerAnswer: 6
Ask about this question
Q6

Chemistry, Question 6 (3 marks)

Hydrocarbons (alkynes, elimination) · +3 / −1
The number of isomeric tetraenes (NOT containing spsp-hybridized carbon atoms) that can be formed from the following reaction sequence is ______. (The scheme: 3-(but-2-yn-1-yl)cyclohex-1-ene, i.e. a cyclohexene ring carrying −CH2−C≡C−CH3\mathrm{-CH_2{-}C{\equiv}C{-}CH_3} on the allylic carbon next to the ring C=C, treated with 1. Na, liquid NH3\mathrm{NH_3}; 2. Br2\mathrm{Br_2} (excess); 3. alc. KOH.)

Tests: Follow dissolving-metal reduction, bromination and double elimination, then count geometric isomers.

Show solution
  1. Na/liquid NH3\mathrm{NH_3} reduces only the alkyne, to the trans alkene; the isolated ring C=C is untouched. Excess Br2\mathrm{Br_2} then adds to both C=C bonds, giving a tetrabromide with two vicinal dibromide units: ring C1, C2 and side-chain Cb\mathrm{C_b}, Cc\mathrm{C_c} in ring−CH2−CHBr−CHBr−CH3\mathrm{ring{-}CH_2{-}CHBr{-}CHBr{-}CH_3}.
  2. Alc. KOH removes two HBr from each unit. To avoid spsp carbons (alkyne or allene), the two new C=C bonds of a unit must not share a carbon: each Br must leave with an H from the carbon on the far side.
  3. Ring: Br on C1 leaves with H from C6 and Br on C2 with H from C3, giving the conjugated 1,3-cyclohexadiene C6=C1−C2=C3\mathrm{C6{=}C1{-}C2{=}C3}, with the side chain on C3. Any other pairing makes C1=C2\mathrm{C1{=}C2} and then an allene.
  4. Side chain: Cb\mathrm{C_b}-Br leaves with H from the CH2\mathrm{CH_2} and Cc\mathrm{C_c}-Br with H from the CH3\mathrm{CH_3}, giving −CH=CH−CH=CH2\mathrm{{-}CH{=}CH{-}CH{=}CH_2}. The single tetraene constitution is 1-(buta-1,3-dien-1-yl)cyclohexa-1,3-diene.
  5. The ring stereocentre became sp2sp^2, and the terminal CH=CH2\mathrm{CH{=}CH_2} has no geometric isomers, but the inner CH=CH\mathrm{CH{=}CH} joined to the ring can be E or Z. So 2 isomeric tetraenes.

    Why: The trans geometry from Na/NH3 is lost on bromination and the new C=C forms both ways in the elimination.

AnswerAnswer: 2
Ask about this question
Q7

Chemistry, Question 7 (3 marks)

Hydrocarbons (ozonolysis, Kolbe electrolysis, aromatisation) · +3 / −1
The number of −CH2−\mathrm{-CH_2-} (methylene) groups in the product formed from the following reaction sequence is ______. (The scheme: (E)-oct-4-ene, CH3CH2CH2CH=CHCH2CH2CH3\mathrm{CH_3CH_2CH_2CH{=}CHCH_2CH_2CH_3}, treated with 1. O3\mathrm{O_3}, Zn/H2O\mathrm{Zn/H_2O}; 2. KMnO4\mathrm{KMnO_4}; 3. NaOH, electrolysis; 4. Cr2O3\mathrm{Cr_2O_3}, 770 K, 20 atm.)

Tests: Track carbon count through ozonolysis, oxidation, Kolbe coupling and aromatisation.

Show solution
  1. Reductive ozonolysis splits the symmetric alkene into two molecules of butanal, CH3CH2CH2CHO\mathrm{CH_3CH_2CH_2CHO}.
  2. KMnO4\mathrm{KMnO_4} oxidises butanal to butanoic acid, CH3CH2CH2COOH\mathrm{CH_3CH_2CH_2COOH}.
  3. NaOH gives sodium butanoate; Kolbe electrolysis couples two propyl radicals: 2CH3CH2CH2COO−→CH3(CH2)4CH3+2CO2+2e−\mathrm{2CH_3CH_2CH_2COO^- \rightarrow CH_3(CH_2)_4CH_3 + 2CO_2 + 2e^-}, i.e. n-hexane.
  4. Cr2O3\mathrm{Cr_2O_3} at 770 K and 20 atm aromatises n-hexane (cyclisation and dehydrogenation) to benzene, C6H6\mathrm{C_6H_6}.
  5. Benzene has only CH groups, so the number of CH2\mathrm{CH_2} groups is 0.
AnswerAnswer: 0
Ask about this question
Q8

Chemistry, Question 8 (3 marks)

Stereochemistry (ozonolysis, chirality) · +3 / −1
The total number of chiral molecules formed from one molecule of P on complete ozonolysis (O3\mathrm{O_3}, Zn/H2O\mathrm{Zn/H_2O}) is ______. (P is the open chain CH3CH=C(CH3)−C(OH)(CH3)−C(CH3)=C(CH3)−C(CH3)(OH)−CH=C(CH3)−C(OH)(CH3)−C(CH3)=CH−C(CH3)(OH)−C(CH3)=C(CH3)−C(OH)(CH3)−C(CH3)=CHCH3\mathrm{CH_3CH{=}C(CH_3){-}C(OH)(CH_3){-}C(CH_3){=}C(CH_3){-}C(CH_3)(OH){-}CH{=}C(CH_3){-}C(OH)(CH_3){-}C(CH_3){=}CH{-}C(CH_3)(OH){-}C(CH_3){=}C(CH_3){-}C(OH)(CH_3){-}C(CH_3){=}CHCH_3}, drawn as a zigzag with six C=C bonds and four carbinol carbons C(OH)(CH3)\mathrm{C(OH)(CH_3)}, each drawn with a definite configuration by wedge and hash bonds.)

Tests: Cut every C=C, write each fragment and test each carbinol carbon for four different groups.

Show solution
  1. Ozonolysis cuts all six C=C bonds; each carbinol carbon stays in a fragment with its two neighbouring (former alkene) carbons, now C=O groups.
  2. End fragments (twice): CH3CHO\mathrm{CH_3CHO}, achiral.
  3. Three fragments CH3CO−C(OH)(CH3)−COCH3\mathrm{CH_3CO{-}C(OH)(CH_3){-}COCH_3} (3-hydroxy-3-methylpentane-2,4-dione): from carbinol carbons flanked on both sides by C(CH3)=\mathrm{C(CH_3){=}}. The central carbon carries two identical acetyl groups, so it is achiral.
  4. Two fragments CH3CO−C(OH)(CH3)−CHO\mathrm{CH_3CO{-}C(OH)(CH_3){-}CHO} (2-hydroxy-2-methyl-3-oxobutanal): from the two carbinol carbons with a −CH=\mathrm{{-}CH{=}} neighbour on one side. The central carbon has four different groups (OH, CH3\mathrm{CH_3}, COCH3\mathrm{COCH_3}, CHO): chiral.
  5. These two carbons are drawn with the same wedge/hash pattern but with CHO and COCH3\mathrm{COCH_3} on opposite sides, so the two chiral fragments are enantiomers; each is still one chiral molecule. Total chiral molecules = 2.
AnswerAnswer: 2
Ask about this question

Chemistry, Section 2: 6 questions, one or more options correct: +4 if all the correct options are chosen; +3 if all four are correct and only three are chosen; +2 if three or more are correct and only two are chosen, both correct; +1 if two or more are correct and only one is chosen, a correct one; 0 if unanswered; −2 in all other cases

Q9

Chemistry, Question 9 (4 marks)

Some basic concepts (law of multiple proportions) · +4 / −2
To check the principle of multiple proportions, a series of pure binary compounds (PmQn\mathrm{P_mQ_n}) were analyzed and their composition is tabulated below. The correct option(s) is(are)
CompoundWeight % of PWeight % of Q
15050
244.455.6
34060
  1. (A)If empirical formula of compound 3 is P3Q4\mathrm{P_3Q_4}, then the empirical formula of compound 2 is P3Q5\mathrm{P_3Q_5}.
  2. (B)If empirical formula of compound 3 is P3Q2\mathrm{P_3Q_2} and atomic weight of element P is 20, then the atomic weight of Q is 45.
  3. (C)If empirical formula of compound 2 is PQ, then the empirical formula of the compound 1 is P5Q4\mathrm{P_5Q_4}.
  4. (D)If atomic weight of P and Q are 70 and 35, respectively, then the empirical formula of compound 1 is P2Q\mathrm{P_2Q}.

Tests: Use mass ratios at fixed mass of one element to move between empirical formulas.

Show solution
  1. Mass of Q per gram of P: compound 1: 50/50=150/50 = 1; compound 2: 55.6/44.4=1.25=5/455.6/44.4 = 1.25 = 5/4; compound 3: 60/40=1.560/40 = 1.5. Ratio 4 : 5 : 6, simple whole numbers, as the law requires.
  2. (A) False. P3Q4\mathrm{P_3Q_4} for 3: 4MQ3MP=1.5⇒MQ/MP=1.125\dfrac{4M_Q}{3M_P} = 1.5 \Rightarrow M_Q/M_P = 1.125. For 2: atoms Q per P =1.25/1.125=10/9= 1.25/1.125 = 10/9, i.e. P9Q10\mathrm{P_9Q_{10}}, not P3Q5\mathrm{P_3Q_5}.
  3. (B) True. P3Q2\mathrm{P_3Q_2} with MP=20M_P = 20: mass of P =60= 60, so mass of Q =1.5×60=90= 1.5 \times 60 = 90 for 2 atoms, MQ=45M_Q = 45.
  4. (C) True. PQ for 2: MQ/MP=1.25M_Q/M_P = 1.25. For 1: atoms Q per P =1/1.25=4/5= 1/1.25 = 4/5, i.e. P5Q4\mathrm{P_5Q_4}.
  5. (D) False. Compound 1: moles P =50/70=0.714= 50/70 = 0.714, moles Q =50/35=1.43= 50/35 = 1.43, ratio 1 : 2, so PQ2\mathrm{PQ_2}, not P2Q\mathrm{P_2Q}.
AnswerAnswer: (B), (C)
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Thermodynamics (entropy) · +4 / −2
The correct option(s) about entropy (S) is(are) [R = gas constant, F = Faraday constant, T = Temperature]
  1. (A)For the reaction, M(s)+2H+(aq)→H2(g)+M2+(aq)\mathrm{M(s) + 2H^+(aq) \rightarrow H_2(g) + M^{2+}(aq)}, if dEcelldT=RF\dfrac{dE_{cell}}{dT} = \dfrac{R}{F}, then the entropy change of the reaction is R (assume that entropy and internal energy changes are temperature independent).
  2. (B)The cell reaction, Pt(s) ∣ H2(g,1 bar) ∣ H+(aq,0.01 M) ∥ H+(aq,0.1 M) ∣ H2(g,1 bar) ∣ Pt(s)\mathrm{Pt(s)\,|\,H_2(g, 1\,bar)\,|\,H^+(aq, 0.01\,M)\,\|\,H^+(aq, 0.1\,M)\,|\,H_2(g, 1\,bar)\,|\,Pt(s)}, is an entropy driven process.
  3. (C)For racemization of an optically active compound, ΔS>0\Delta S > 0.
  4. (D)ΔS>0\Delta S > 0, for [Ni(H2O)6]2++3 en→[Ni(en)3]2++6H2O\mathrm{[Ni(H_2O)_6]^{2+} + 3\,en \rightarrow [Ni(en)_3]^{2+} + 6H_2O} (where en = ethylenediamine).

Tests: Link ΔS to the temperature coefficient of cell EMF and judge entropy changes in physical and chemical processes.

Show solution
  1. (A) False. ΔG=−nFEcell\Delta G = -nFE_{cell} and ΔS=−(∂ΔG∂T)P=nFdEcelldT\Delta S = -\left(\dfrac{\partial \Delta G}{\partial T}\right)_P = nF\dfrac{dE_{cell}}{dT}. Here n=2n = 2, so ΔS=2F⋅RF=2R\Delta S = 2F \cdot \dfrac{R}{F} = 2R, not R.
  2. (B) True. In this concentration cell the net change is only H+(0.1 M)→H+(0.01 M)\mathrm{H^+(0.1\,M) \rightarrow H^+(0.01\,M)}: no bonds change, so ΔH=0\Delta H = 0, while E=0.059log⁡10>0E = 0.059\log 10 > 0 gives ΔG<0\Delta G < 0. Since ΔG=−TΔS\Delta G = -T\Delta S, the process is driven entirely by entropy (dilution).
  3. (C) True. Racemization turns one enantiomer into a 50 : 50 mixture with ΔH≈0\Delta H \approx 0; the mixing gives ΔS=Rln⁡2\Delta S = R\ln 2 per mole, positive.
  4. (D) True. Chelate effect: 4 particles on the left become 7 on the right (3 en replace 6 water molecules), so translational entropy rises: ΔS>0\Delta S > 0.
AnswerAnswer: (B), (C), (D)
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

p-Block elements (boron compounds) · +4 / −2
The compound(s) which react(s) with NH3\mathrm{NH_3} to give boron nitride (BN) is(are)
  1. (A)B
  2. (B)B2H6\mathrm{B_2H_6}
  3. (C)B2O3\mathrm{B_2O_3}
  4. (D)HBF4\mathrm{HBF_4}

Tests: Recall which boron sources give boron nitride with ammonia on heating.

Show solution
  1. (A) True. Boron heated strongly in ammonia gives boron nitride: 2B+2NH3→Δ2BN+3H2\mathrm{2B + 2NH_3 \xrightarrow{\Delta} 2BN + 3H_2}. Boron is an element, so "compound(s)" is used loosely, but the reaction is a standard way to make BN.

    Why: The published key leaves out (A); the chemistry of the reaction supports it.

  2. (B) True. Diborane with ammonia first gives the adduct [BH2(NH3)2]+[BH4]−\mathrm{[BH_2(NH_3)_2]^+[BH_4]^-}, then borazine B3N3H6\mathrm{B_3N_3H_6} on heating; with excess ammonia at higher temperature the end product is BN: B2H6+2NH3→Δ2BN+6H2\mathrm{B_2H_6 + 2NH_3 \xrightarrow{\Delta} 2BN + 6H_2}.
  3. (C) True. The usual industrial route: B2O3+2NH3→Δ2BN+3H2O\mathrm{B_2O_3 + 2NH_3 \xrightarrow{\Delta} 2BN + 3H_2O}.
  4. (D) False. HBF4\mathrm{HBF_4} is a strong acid; with ammonia it only forms the salt NH4BF4\mathrm{NH_4BF_4}, the B–F bonds stay intact, and no BN forms.
AnswerAnswer: (A), (B), (C) (the published institute key gives (B), (C))
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Metallurgy (extraction of iron) · +4 / −2
The correct option(s) related to the extraction of iron from its ore in the blast furnace operating in the temperature range 900 – 1500 K is(are)
  1. (A)Limestone is used to remove silicate impurity.
  2. (B)Pig iron obtained from blast furnace contains about 4% carbon.
  3. (C)Coke (C) converts CO2\mathrm{CO_2} to CO.
  4. (D)Exhaust gases consist of NO2\mathrm{NO_2} and CO.

Tests: Recall the reactions and products in each zone of the blast furnace.

Show solution
  1. (A) True. Limestone decomposes to CaO (flux), which combines with the silica/silicate gangue: CaO+SiO2→CaSiO3\mathrm{CaO + SiO_2 \rightarrow CaSiO_3} (slag).
  2. (B) True. Pig iron from the blast furnace has about 4% carbon (with small amounts of S, P, Si, Mn).
  3. (C) True. In the 900–1500 K zone, C+CO2→2CO\mathrm{C + CO_2 \rightarrow 2CO}; this CO is the main reducing agent for the iron oxides.
  4. (D) False. The exhaust (blast-furnace gas) is mainly N2\mathrm{N_2} from the air blast with CO and CO2\mathrm{CO_2}; nitrogen is not oxidised to NO2\mathrm{NO_2} in the reducing atmosphere.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Aldehydes, ketones and carboxylic acids (Friedel–Crafts, Clemmensen) · +4 / −2
Considering the following reaction sequence, the correct statement(s) is(are) (The scheme: benzene with succinic anhydride (the five-membered cyclic anhydride of butanedioic acid) and AlCl3\mathrm{AlCl_3} gives P; P with Zn/Hg, HCl gives Q; Q with SOCl2\mathrm{SOCl_2} gives R; R with AlCl3\mathrm{AlCl_3} gives S; S with Zn/Hg, HCl gives a hydrocarbon.)
  1. (A)Compounds P and Q are carboxylic acids.
  2. (B)Compound S decolorizes bromine water.
  3. (C)Compounds P and S react with hydroxylamine to give the corresponding oximes.
  4. (D)Compound R reacts with dialkylcadmium to give the corresponding tertiary alcohol.

Tests: Follow Friedel–Crafts acylation, Clemmensen reduction and ring closure to α-tetralone, then test each product.

Show solution
  1. Friedel–Crafts acylation opens the anhydride: P = 4-oxo-4-phenylbutanoic acid, C6H5CO(CH2)2COOH\mathrm{C_6H_5CO(CH_2)_2COOH}. Clemmensen reduces the ketone: Q = 4-phenylbutanoic acid, C6H5(CH2)3COOH\mathrm{C_6H_5(CH_2)_3COOH}.
  2. R = 4-phenylbutanoyl chloride; intramolecular Friedel–Crafts acylation closes a six-membered ring: S = α\alpha-tetralone (3,4-dihydronaphthalen-1(2H)-one); Clemmensen then gives tetralin (1,2,3,4-tetrahydronaphthalene).
  3. (A) True. P (keto acid) and Q both carry COOH.
  4. (B) False. S is an aryl ketone with no C=C outside the aromatic ring; it does not decolorize bromine water.
  5. (C) True. P and S both have a ketone C=O, which condenses with NH2OH\mathrm{NH_2OH} to an oxime.
  6. (D) False. Dialkylcadmium converts an acid chloride to a ketone (RCOCl+R2′Cd→RCOR′\mathrm{RCOCl + R'_2Cd \rightarrow RCOR'}) and, being a weak nucleophile, stops there; no tertiary alcohol forms.

    Why: Grignard reagents would go on to the tertiary alcohol; organocadmium reagents do not attack ketones.

AnswerAnswer: (A), (C)
Ask about this question
Q14

Chemistry, Question 14 (4 marks)

Polymers · +4 / −2
Among the following, the correct statement(s) about polymers is(are)
  1. (A)The polymerization of chloroprene gives natural rubber.
  2. (B)Teflon is prepared from tetrafluoroethene by heating it with persulphate catalyst at high pressures.
  3. (C)PVC are thermoplastic polymers.
  4. (D)Ethene at 350-570 K temperature and 1000-2000 atm pressure in the presence of a peroxide initiator yields high density polythene.

Tests: Recall the monomers and conditions for neoprene, Teflon, PVC and the two kinds of polythene.

Show solution
  1. (A) False. Chloroprene (2-chlorobuta-1,3-diene) polymerises to neoprene, a synthetic rubber; natural rubber is cis-1,4-polyisoprene.
  2. (B) True. Teflon is made by heating tetrafluoroethene with a free-radical or persulphate catalyst at high pressure.
  3. (C) True. PVC is a linear polymer with weak intermolecular forces between chains; it softens on heating and hardens on cooling repeatedly: a thermoplastic.
  4. (D) False. These high-temperature, high-pressure free-radical conditions give branched low density polythene (LDPE); HDPE is made with a Ziegler–Natta catalyst at about 333–343 K and 6–7 atm.
AnswerAnswer: (B), (C)
Ask about this question

Chemistry, Section 3: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q15

Chemistry, Question 15 (3 marks)

Solid state (packing efficiency) · +3 / −1
Atom X occupies the fcc lattice sites as well as alternate tetrahedral voids of the same lattice. The packing efficiency (in %) of the resultant solid is closest to
  1. (A)25
  2. (B)35
  3. (C)55
  4. (D)75

Tests: Find the atom–atom contact direction when identical atoms fill tetrahedral voids, then compute packing efficiency.

Show solution
  1. Per unit cell: 4 atoms at fcc sites + 4 atoms in alternate tetrahedral voids (8 voids, half filled) = 8 atoms, all of the same size.
  2. A tetrahedral void lies a quarter of the body diagonal from a corner, so a void atom touches the corner atom: 2r=3a4⇒r=3a82r = \dfrac{\sqrt{3}a}{4} \Rightarrow r = \dfrac{\sqrt{3}a}{8}.

    Why: Identical atoms are far too big for the void, so the lattice expands and contact is along the body diagonal, not the face diagonal.

  3. Packing efficiency =8⋅43πr3a3=32π3(38)3=3π16≈0.34= \dfrac{8 \cdot \frac{4}{3}\pi r^3}{a^3} = \dfrac{32\pi}{3}\left(\dfrac{\sqrt{3}}{8}\right)^3 = \dfrac{\sqrt{3}\pi}{16} \approx 0.34.
  4. About 34%, closest to 35% (the diamond-like structure).
AnswerAnswer: (B) 35
Ask about this question
Q16

Chemistry, Question 16 (3 marks)

p-Block elements (oxides of chlorine) · +3 / −1
The reaction of HClO3\mathrm{HClO_3} with HCl gives a paramagnetic gas, which upon reaction with O3\mathrm{O_3} produces
  1. (A)Cl2O\mathrm{Cl_2O}
  2. (B)ClO2\mathrm{ClO_2}
  3. (C)Cl2O6\mathrm{Cl_2O_6}
  4. (D)Cl2O7\mathrm{Cl_2O_7}

Tests: Identify ClO2 as the paramagnetic gas and recall its oxidation by ozone.

Show solution
  1. Chloric acid and HCl comproportionate: 2HClO3+2HCl→2ClO2+Cl2+2H2O\mathrm{2HClO_3 + 2HCl \rightarrow 2ClO_2 + Cl_2 + 2H_2O}. Of the two gases, ClO2\mathrm{ClO_2} (odd electron) is paramagnetic; Cl2\mathrm{Cl_2} is not.
  2. Ozone oxidises chlorine dioxide: 2ClO2+2O3→Cl2O6+2O2\mathrm{2ClO_2 + 2O_3 \rightarrow Cl_2O_6 + 2O_2}.
  3. So the product is dichlorine hexoxide, Cl2O6\mathrm{Cl_2O_6} (Cl raised from +4 to +6).
AnswerAnswer: (C) Cl2O6\mathrm{Cl_2O_6}
Ask about this question
Q17

Chemistry, Question 17 (3 marks)

p-Block elements (lead halides, complex formation) · +3 / −1
The reaction of Pb(NO3)2\mathrm{Pb(NO_3)_2} and NaCl in water produces a precipitate that dissolves upon the addition of HCl of appropriate concentration. The dissolution of the precipitate is due to the formation of
  1. (A)PbCl2\mathrm{PbCl_2}
  2. (B)PbCl4\mathrm{PbCl_4}
  3. (C)[PbCl4]2−\mathrm{[PbCl_4]^{2-}}
  4. (D)[PbCl6]2−\mathrm{[PbCl_6]^{2-}}

Tests: Explain why PbCl2 dissolves in excess chloride through complex formation.

Show solution
  1. Pb(NO3)2+2NaCl→PbCl2↓+2NaNO3\mathrm{Pb(NO_3)_2 + 2NaCl \rightarrow PbCl_2\downarrow + 2NaNO_3}: the white precipitate is PbCl2\mathrm{PbCl_2}.
  2. In concentrated HCl the excess chloride forms a soluble chloro complex of Pb(II): PbCl2+2Cl−→[PbCl4]2−\mathrm{PbCl_2 + 2Cl^- \rightarrow [PbCl_4]^{2-}}.
  3. (A) is the precipitate itself; (B) PbCl4\mathrm{PbCl_4} and (D) [PbCl6]2−\mathrm{[PbCl_6]^{2-}} contain Pb(IV), but HCl is not an oxidant and lead stays +2.
AnswerAnswer: (C) [PbCl4]2−\mathrm{[PbCl_4]^{2-}}
Ask about this question
Q18

Chemistry, Question 18 (3 marks)

Biomolecules (carbohydrates) · +3 / −1
Treatment of D-glucose with aqueous NaOH results in a mixture of monosaccharides, which are (Each option shows three open-chain Fischer projections with CH2OH\mathrm{CH_2OH} at the bottom; for an aldose the OH positions at C2, C3, C4, C5 are given as left (L) or right (R); a ketose has CH2OH\mathrm{CH_2OH} at C1, C=O at C2 and the OH positions at C3, C4, C5.)
  1. (A)aldose (L, L, R, R); aldose (R, L, L, R); aldose (L, L, L, R)
  2. (B)ketose (C3 L, C4 R, C5 R); aldose (L, R, R, R); aldose (L, L, L, R)
  3. (C)aldose (R, L, R, R); ketose (C3 L, C4 R, C5 R); aldose (L, L, R, R)
  4. (D)aldose (R, L, L, R); aldose (R, L, R, R); aldose (L, L, R, R)

Tests: Use the enediol mechanism to see which sugars glucose equilibrates with in base.

Show solution
  1. Dilute base enolises D-glucose to a 1,2-enediol (Lobry de Bruyn–van Ekenstein rearrangement). Reprotonation gives back D-glucose or its C2 epimer D-mannose, and tautomerisation to the C2 ketone gives D-fructose. C3, C4 and C5 are not touched.
  2. So the mixture keeps C3 L, C4 R, C5 R: D-glucose (R, L, R, R), D-mannose (L, L, R, R) and D-fructose (ketose, C3 L, C4 R, C5 R).
  3. (C) matches: glucose, fructose and mannose.
  4. (A) has D-mannose, D-galactose (R, L, L, R) and D-talose (L, L, L, R); (B) has fructose but D-altrose and D-talose; (D) has D-galactose with glucose and mannose. Galactose, talose and altrose need a change at C3 or C4, which the enediol cannot make.
AnswerAnswer: (C) D-glucose, D-fructose and D-mannose
Ask about this question

Questions are quoted from JEE (Advanced) 2022 Paper 2 (English); figures are described in words. No official answer key is in our sources for this paper, so every final answer is checked against the answer key coaching institutes (FIITJEE, Resonance) published after the exam, and worked out independently. Where they disagree, the solution follows the correct working and says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.