AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2025 Paper 1: Question Paper with Solutions and Answer Key

All 48 questions of JEE Advanced 2025 Paper 1 solved step by step: Mathematics, Physics and Chemistry, with the official answer key and the marking of each section. Every final answer is checked against the official final answer key.

JEE (Advanced) 2025 Paper 1: 48 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2025: Paper 2.

Mathematics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Mathematics, Question 1 (3 marks)

Polynomials and real roots · +3 / −1
Let R\mathbb{R} denote the set of all real numbers. Let ai,bi∈Ra_i, b_i \in \mathbb{R} for i∈{1,2,3}i \in \{1, 2, 3\}. Define the functions f:R→Rf: \mathbb{R} \rightarrow \mathbb{R}, g:R→Rg: \mathbb{R} \rightarrow \mathbb{R} and h:R→Rh: \mathbb{R} \rightarrow \mathbb{R} by f(x)=a1+10x+a2x2+a3x3+x4f(x) = a_1 + 10x + a_2x^2 + a_3x^3 + x^4, g(x)=b1+3x+b2x2+b3x3+x4g(x) = b_1 + 3x + b_2x^2 + b_3x^3 + x^4, h(x)=f(x+1)−g(x+2)h(x) = f(x+1) - g(x+2). If f(x)≠g(x)f(x) \ne g(x) for every x∈Rx \in \mathbb{R}, then the coefficient of x3x^3 in h(x)h(x) is
  1. (A)8
  2. (B)2
  3. (C)−4-4
  4. (D)−6-6

Tests: Use 'no real root' to force the cubic coefficients to match, then expand shifted powers.

Show solution
  1. f(x)−g(x)=(a1−b1)+7x+(a2−b2)x2+(a3−b3)x3f(x) - g(x) = (a_1 - b_1) + 7x + (a_2 - b_2)x^2 + (a_3 - b_3)x^3; the x4x^4 terms cancel.
  2. f(x)≠g(x)f(x) \ne g(x) for every real xx means f−gf - g has no real root. A real cubic always has a real root, so a3=b3a_3 = b_3.

    Why: An odd-degree polynomial goes from −∞ to +∞, so it crosses zero.

  3. (If also a2=b2a_2 = b_2, then 7x+(a1−b1)7x + (a_1 - b_1) has a root, so a2≠b2a_2 \ne b_2: f−gf - g is a quadratic with negative discriminant. Only a3=b3a_3 = b_3 is needed below.)
  4. Coefficient of x3x^3 in f(x+1)f(x+1): from (x+1)4(x+1)^4 it is (41)⋅1=4\binom{4}{1} \cdot 1 = 4, from a3(x+1)3a_3(x+1)^3 it is a3a_3. Total 4+a34 + a_3.
  5. Coefficient of x3x^3 in g(x+2)g(x+2): from (x+2)4(x+2)^4 it is (41)⋅2=8\binom{4}{1} \cdot 2 = 8, plus b3b_3. Total 8+b38 + b_3.
  6. Coefficient of x3x^3 in hh: (4+a3)−(8+b3)=−4+(a3−b3)=−4(4 + a_3) - (8 + b_3) = -4 + (a_3 - b_3) = -4.
AnswerAnswer: (C) −4-4
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Probability (conditional probability) · +3 / −1
Three students S1,S2S_1, S_2 and S3S_3 are given a problem to solve. Consider the following events: UU: At least one of S1,S2S_1, S_2 and S3S_3 can solve the problem; VV: S1S_1 can solve the problem, given that neither S2S_2 nor S3S_3 can solve the problem; WW: S2S_2 can solve the problem and S3S_3 cannot solve the problem; TT: S3S_3 can solve the problem. For any event EE, let P(E)P(E) denote the probability of EE. If P(U)=12P(U) = \dfrac{1}{2}, P(V)=110P(V) = \dfrac{1}{10} and P(W)=112P(W) = \dfrac{1}{12}, then P(T)P(T) is equal to
  1. (A)1336\dfrac{13}{36}
  2. (B)13\dfrac{1}{3}
  3. (C)1960\dfrac{19}{60}
  4. (D)14\dfrac{1}{4}

Tests: Translate worded events into intersections and use conditional probability to find a missing piece.

Show solution
  1. Let AiA_i be "SiS_i solves". P(U)=12P(U) = \dfrac{1}{2} gives P(A1′A2′A3′)=1−12=12P(A_1' A_2' A_3') = 1 - \dfrac{1}{2} = \dfrac{1}{2}.

    Why: Nobody solves is the complement of at least one solves.

  2. Let x=P(A1A2′A3′)x = P(A_1 A_2' A_3'). Then P(A2′A3′)=x+12P(A_2' A_3') = x + \dfrac{1}{2} and P(V)=xx+12=110P(V) = \dfrac{x}{x + \frac{1}{2}} = \dfrac{1}{10}, so 10x=x+1210x = x + \dfrac{1}{2}, x=118x = \dfrac{1}{18}.

    Why: V is a conditional probability: S₁ solves, given S₂ and S₃ both fail.

  3. P(A2′A3′)=118+12=1018=59P(A_2' A_3') = \dfrac{1}{18} + \dfrac{1}{2} = \dfrac{10}{18} = \dfrac{5}{9}.
  4. A3′A_3' splits into A2A3′A_2 A_3' and A2′A3′A_2' A_3': P(A3′)=112+59=336+2036=2336P(A_3') = \dfrac{1}{12} + \dfrac{5}{9} = \dfrac{3}{36} + \dfrac{20}{36} = \dfrac{23}{36}.
  5. P(T)=P(A3)=1−2336=1336P(T) = P(A_3) = 1 - \dfrac{23}{36} = \dfrac{13}{36}. No independence was assumed or needed.
AnswerAnswer: (A) 1336\dfrac{13}{36}
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Differentiability and monotonicity · +3 / −1
Let R\mathbb{R} denote the set of all real numbers. Define the function f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} by f(x)=2−2x2−x2sin⁡1xf(x) = 2 - 2x^2 - x^2 \sin\dfrac{1}{x} if x≠0x \ne 0, and f(x)=2f(x) = 2 if x=0x = 0. Then which one of the following statements is TRUE?
  1. (A)The function ff is NOT differentiable at x=0x = 0
  2. (B)There is a positive real number δ\delta, such that ff is a decreasing function on the interval (0,δ)(0, \delta)
  3. (C)For any positive real number δ\delta, the function ff is NOT an increasing function on the interval (−δ,0)(-\delta, 0)
  4. (D)x=0x = 0 is a point of local minima of ff

Tests: Check differentiability from the definition and test monotonicity when the derivative oscillates near a point.

Show solution
  1. (A) f′(0)=lim⁡x→0−2x2−x2sin⁡(1/x)x=lim⁡x→0(−2x−xsin⁡1x)=0f'(0) = \lim_{x \to 0} \dfrac{-2x^2 - x^2 \sin(1/x)}{x} = \lim_{x \to 0} \left(-2x - x\sin\dfrac{1}{x}\right) = 0. So ff is differentiable at 0: (A) is false.
  2. (D) For x≠0x \ne 0: f(x)−2=−x2(2+sin⁡1x)<0f(x) - 2 = -x^2\left(2 + \sin\dfrac{1}{x}\right) < 0, since 2+sin⁡1x≥12 + \sin\dfrac{1}{x} \ge 1. So f(x)<f(0)f(x) < f(0) near 0: x=0x = 0 is a local maximum, and (D) is false.
  3. For x≠0x \ne 0: f′(x)=−4x−2xsin⁡1x+cos⁡1x=−x(4+2sin⁡1x)+cos⁡1xf'(x) = -4x - 2x\sin\dfrac{1}{x} + \cos\dfrac{1}{x} = -x\left(4 + 2\sin\dfrac{1}{x}\right) + \cos\dfrac{1}{x}.
  4. Near 0 the first part is tiny (at most 6∣x∣6|x|) while cos⁡1x\cos\dfrac{1}{x} keeps swinging between −1-1 and 11. So in every interval (0,δ)(0, \delta) and every (−δ,0)(-\delta, 0), f′f' takes both positive and negative values.

    Why: 1/x runs through infinitely many multiples of π as x → 0.

  5. (B) At x=12kπx = \dfrac{1}{2k\pi} (inside (0,δ)(0, \delta) for large kk): f′(x)=−4x+1>0f'(x) = -4x + 1 > 0, so ff is not decreasing on any (0,δ)(0, \delta): false.
  6. (C) At x=−1(2k+1)πx = -\dfrac{1}{(2k+1)\pi} (inside (−δ,0)(-\delta, 0) for large kk): sin⁡1x=0\sin\dfrac{1}{x} = 0, cos⁡1x=−1\cos\dfrac{1}{x} = -1, so f′(x)=4∣x∣−1<0f'(x) = 4|x| - 1 < 0. So ff is not increasing on any (−δ,0)(-\delta, 0): true.
AnswerAnswer: (C) ff is not increasing on (−δ,0)(-\delta, 0) for any δ>0\delta > 0
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Matrices (orthogonal matrices) · +3 / −1
Consider the matrix P=(200020003)P = \begin{pmatrix} 2 & 0 & 0 \\ 0 & 2 & 0 \\ 0 & 0 & 3 \end{pmatrix}. Let the transpose of a matrix XX be denoted by XTX^T. Then the number of 3×33 \times 3 invertible matrices QQ with integer entries, such that Q−1=QTQ^{-1} = Q^T and PQ=QPPQ = QP, is
  1. (A)32
  2. (B)8
  3. (C)16
  4. (D)24

Tests: Integer orthogonal matrices are signed permutations; commuting with a diagonal matrix forces a block shape.

Show solution
  1. Q−1=QTQ^{-1} = Q^T means QQT=IQQ^T = I: each row of QQ is a unit vector. With integer entries, a row's squares sum to 1, so each row has one entry ±1\pm 1 and the rest 0.

    Why: Integers whose squares add to 1: one ±1, the others 0.

  2. The rows are also mutually perpendicular, so the ±1\pm 1s sit in different columns: QQ is a signed permutation matrix.
  3. PQ=QPPQ = QP with PP diagonal: (PQ)ij=piqij(PQ)_{ij} = p_i q_{ij} and (QP)ij=qijpj(QP)_{ij} = q_{ij} p_j, so qij(pi−pj)=0q_{ij}(p_i - p_j) = 0. Since p1=p2=2≠p3=3p_1 = p_2 = 2 \ne p_3 = 3: q13=q23=q31=q32=0q_{13} = q_{23} = q_{31} = q_{32} = 0.
  4. So Q=(A00±1)Q = \begin{pmatrix} A & 0 \\ 0 & \pm 1 \end{pmatrix} with AA a 2×22 \times 2 signed permutation matrix.
  5. 2×22 \times 2 signed permutations: 2 permutations ×\times 222^2 sign choices =8= 8. The corner entry: 2 choices. Total 8×2=168 \times 2 = 16.
AnswerAnswer: (C) 16
Ask about this question

Mathematics, Section 2: 3 questions, one or more options correct: +4 if all correct options are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q5

Mathematics, Question 5 (4 marks)

3D geometry (lines and planes) · +4 / −2
Let L1L_1 be the line of intersection of the planes given by the equations 2x+3y+z=42x + 3y + z = 4 and x+2y+z=5x + 2y + z = 5. Let L2L_2 be the line passing through the point P(2,−1,3)P(2, -1, 3) and parallel to L1L_1. Let MM denote the plane given by the equation 2x+y−2z=62x + y - 2z = 6. Suppose that the line L2L_2 meets the plane MM at the point QQ. Let RR be the foot of the perpendicular drawn from PP to the plane MM. Then which of the following statements is (are) TRUE?
  1. (A)The length of the line segment PQPQ is 939\sqrt{3}
  2. (B)The length of the line segment QRQR is 15
  3. (C)The area of ΔPQR\Delta PQR is 32234\dfrac{3}{2}\sqrt{234}
  4. (D)The acute angle between the line segments PQPQ and PRPR is cos⁡−1(123)\cos^{-1}\left(\dfrac{1}{2\sqrt{3}}\right)

Tests: Find a line of intersection, a line–plane meeting point and the foot of a perpendicular, then use the right triangle they make.

Show solution
  1. Direction of L1L_1: (2,3,1)×(1,2,1)=(3−2,1−2,4−3)=(1,−1,1)(2, 3, 1) \times (1, 2, 1) = (3 - 2, 1 - 2, 4 - 3) = (1, -1, 1).

    Why: The line of intersection is perpendicular to both normals.

  2. L2L_2: (2+s,−1−s,3+s)(2 + s, -1 - s, 3 + s). In MM: 2(2+s)+(−1−s)−2(3+s)=6⇒−3−s=6⇒s=−92(2 + s) + (-1 - s) - 2(3 + s) = 6 \Rightarrow -3 - s = 6 \Rightarrow s = -9. So Q=(−7,8,−6)Q = (-7, 8, -6).
  3. (A) PQ=∣s∣⋅∣(1,−1,1)∣=93PQ = |s| \cdot |(1, -1, 1)| = 9\sqrt{3}: true.
  4. Foot RR: R=P+λ(2,1,−2)R = P + \lambda(2, 1, -2) with λ=6−(4−1−6)4+1+4=99=1\lambda = \dfrac{6 - (4 - 1 - 6)}{4 + 1 + 4} = \dfrac{9}{9} = 1. So R=(4,0,1)R = (4, 0, 1) and PR=∣(2,1,−2)∣=3PR = |(2, 1, -2)| = 3.
  5. (B) RQ⃗=(−11,8,−7)\vec{RQ} = (-11, 8, -7), QR=121+64+49=234≈15.3≠15QR = \sqrt{121 + 64 + 49} = \sqrt{234} \approx 15.3 \ne 15: false. (Check: PQ2=PR2+QR2PQ^2 = PR^2 + QR^2: 243=9+234243 = 9 + 234.)
  6. (C) PRPR is perpendicular to the plane, which contains QRQR, so the right angle is at RR: area =12⋅PR⋅QR=12⋅3⋅234=32234= \dfrac{1}{2} \cdot PR \cdot QR = \dfrac{1}{2} \cdot 3 \cdot \sqrt{234} = \dfrac{3}{2}\sqrt{234}: true.
  7. (D) cos⁡∠QPR=PRPQ=393=133\cos\angle QPR = \dfrac{PR}{PQ} = \dfrac{3}{9\sqrt{3}} = \dfrac{1}{3\sqrt{3}}, not 123\dfrac{1}{2\sqrt{3}}: false.
AnswerAnswer: (A), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Functions (one-one and onto) · +4 / −2
Let N\mathbb{N} denote the set of all natural numbers, and Z\mathbb{Z} denote the set of all integers. Consider the functions f:N→Zf: \mathbb{N} \rightarrow \mathbb{Z} and g:Z→Ng: \mathbb{Z} \rightarrow \mathbb{N} defined by f(n)=(n+1)/2f(n) = (n+1)/2 if nn is odd, f(n)=(4−n)/2f(n) = (4-n)/2 if nn is even, and g(n)=3+2ng(n) = 3 + 2n if n≥0n \ge 0, g(n)=−2ng(n) = -2n if n<0n < 0. Define (g∘f)(n)=g(f(n))(g \circ f)(n) = g(f(n)) for all n∈Nn \in \mathbb{N}, and (f∘g)(n)=f(g(n))(f \circ g)(n) = f(g(n)) for all n∈Zn \in \mathbb{Z}. Then which of the following statements is (are) TRUE?
  1. (A)g∘fg \circ f is NOT one-one and g∘fg \circ f is NOT onto
  2. (B)f∘gf \circ g is NOT one-one but f∘gf \circ g is onto
  3. (C)gg is one-one and gg is onto
  4. (D)ff is NOT one-one but ff is onto

Tests: Test one-one and onto for piecewise maps between ℕ and ℤ, including compositions.

Show solution
  1. ff: odd n=1,3,5,…n = 1, 3, 5, \dots give 1,2,3,…1, 2, 3, \dots; even n=2,4,6,…n = 2, 4, 6, \dots give 1,0,−1,…1, 0, -1, \dots. So f(1)=f(2)=1f(1) = f(2) = 1 (not one-one) and every integer is reached (onto). (D) is true.
  2. gg: n≥0n \ge 0 gives 3,5,7,…3, 5, 7, \dots (odd, at least 3); n<0n < 0 gives 2,4,6,…2, 4, 6, \dots (even). No overlap, so gg is one-one; but 1 is never reached, so gg is not onto. (C) is false.
  3. (A) g∘fg \circ f: g(f(1))=g(f(2))g(f(1)) = g(f(2)), so not one-one. Its range is g(f(N))=g(Z)=N∖{1}g(f(\mathbb{N})) = g(\mathbb{Z}) = \mathbb{N} \setminus \{1\}, so not onto. (A) is true.
  4. (B) f∘gf \circ g uses ff only on g(Z)=N∖{1}g(\mathbb{Z}) = \mathbb{N} \setminus \{1\}. There, odd n≥3n \ge 3 give 2,3,4,…2, 3, 4, \dots and even n≥2n \ge 2 give 1,0,−1,…1, 0, -1, \dots: all different, so f∘gf \circ g is one-one.
  5. These values cover all of Z\mathbb{Z}, so f∘gf \circ g is one-one and onto. "f∘gf \circ g is NOT one-one" is false, so (B) is false.

    Why: Dropping n = 1 removes the only repeated value of f.

AnswerAnswer: (A), (D)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Complex numbers (locus, Apollonius circle) · +4 / −2
Let R\mathbb{R} denote the set of all real numbers. Let z1=1+2iz_1 = 1 + 2i and z2=3iz_2 = 3i be two complex numbers, where i=−1i = \sqrt{-1}. Let S={(x,y)∈R×R:∣x+iy−z1∣=2∣x+iy−z2∣}S = \{(x, y) \in \mathbb{R} \times \mathbb{R} : |x + iy - z_1| = 2|x + iy - z_2|\}. Then which of the following statements is (are) TRUE?
  1. (A)SS is a circle with centre (−13,103)\left(-\dfrac{1}{3}, \dfrac{10}{3}\right)
  2. (B)SS is a circle with centre (13,83)\left(\dfrac{1}{3}, \dfrac{8}{3}\right)
  3. (C)SS is a circle with radius 23\dfrac{\sqrt{2}}{3}
  4. (D)SS is a circle with radius 223\dfrac{2\sqrt{2}}{3}

Tests: Turn |z − z₁| = k|z − z₂| (k ≠ 1) into the equation of a circle and read off centre and radius.

Show solution
  1. Square both sides: (x−1)2+(y−2)2=4[x2+(y−3)2](x - 1)^2 + (y - 2)^2 = 4\left[x^2 + (y - 3)^2\right].
  2. Expand: x2−2x+1+y2−4y+4=4x2+4y2−24y+36x^2 - 2x + 1 + y^2 - 4y + 4 = 4x^2 + 4y^2 - 24y + 36, so 3x2+3y2+2x−20y+31=03x^2 + 3y^2 + 2x - 20y + 31 = 0.
  3. Divide by 3: x2+y2+23x−203y+313=0x^2 + y^2 + \dfrac{2}{3}x - \dfrac{20}{3}y + \dfrac{31}{3} = 0. Centre (−13,103)\left(-\dfrac{1}{3}, \dfrac{10}{3}\right): (A) true, (B) false.
  4. r2=19+1009−313=101−939=89r^2 = \dfrac{1}{9} + \dfrac{100}{9} - \dfrac{31}{3} = \dfrac{101 - 93}{9} = \dfrac{8}{9}, so r=223r = \dfrac{2\sqrt{2}}{3}: (D) true, (C) false.
AnswerAnswer: (A), (D)
Ask about this question

Mathematics, Section 3: 6 questions, numerical value answer (truncate or round off to two decimal places): +4 if correct, 0 otherwise

Q8

Mathematics, Question 8 (4 marks)

Relations (counting) · +4
Let the set of all relations RR on the set {a,b,c,d,e,f}\{a, b, c, d, e, f\}, such that RR is reflexive and symmetric, and RR contains exactly 10 elements, be denoted by S\mathcal{S}. Then the number of elements in S\mathcal{S} is ____.

Tests: Count relations with given properties by splitting into diagonal pairs and symmetric off-diagonal pairs.

Show solution
  1. Reflexive: all 6 pairs (a,a),…,(f,f)(a, a), \dots, (f, f) must be in RR. That leaves 10−6=410 - 6 = 4 more ordered pairs.
  2. Symmetric: a pair (x,y)(x, y) with x≠yx \ne y comes with (y,x)(y, x), so the 4 extra pairs are 2 unordered pairs {x,y}\{x, y\}.
  3. Unordered pairs of distinct elements: (62)=15\binom{6}{2} = 15. Choose 2 of them: (152)=105\binom{15}{2} = 105.
AnswerAnswer: 105
Ask about this question
Q9

Mathematics, Question 9 (4 marks)

Vectors (section formula) · +4
For any two points MM and NN in the XYXY-plane, let MN⃗\vec{MN} denote the vector from MM to NN, and 0⃗\vec{0} denote the zero vector. Let PP, QQ and RR be three distinct points in the XYXY-plane. Let SS be a point inside the triangle ΔPQR\Delta PQR such that SP⃗+5SQ⃗+6SR⃗=0⃗\vec{SP} + 5\vec{SQ} + 6\vec{SR} = \vec{0}. Let EE and FF be the mid-points of the sides PRPR and QRQR, respectively. Then the value of length of the line segment EFlength of the line segment ES\dfrac{\text{length of the line segment } EF}{\text{length of the line segment } ES} is ____.

Tests: Find a weighted point from a vector condition and compare lengths along parallel segments.

Show solution
  1. With position vectors, (p⃗−s⃗)+5(q⃗−s⃗)+6(r⃗−s⃗)=0⃗(\vec{p} - \vec{s}) + 5(\vec{q} - \vec{s}) + 6(\vec{r} - \vec{s}) = \vec{0}, so s⃗=p⃗+5q⃗+6r⃗12\vec{s} = \dfrac{\vec{p} + 5\vec{q} + 6\vec{r}}{12}.
  2. e⃗=p⃗+r⃗2\vec{e} = \dfrac{\vec{p} + \vec{r}}{2}, f⃗=q⃗+r⃗2\vec{f} = \dfrac{\vec{q} + \vec{r}}{2}, so EF⃗=q⃗−p⃗2\vec{EF} = \dfrac{\vec{q} - \vec{p}}{2} and EF=PQ2EF = \dfrac{PQ}{2}.

    Why: Mid-point theorem: EF is parallel to PQ and half of it.

  3. ES⃗=s⃗−e⃗=p⃗+5q⃗+6r⃗−6p⃗−6r⃗12=5(q⃗−p⃗)12\vec{ES} = \vec{s} - \vec{e} = \dfrac{\vec{p} + 5\vec{q} + 6\vec{r} - 6\vec{p} - 6\vec{r}}{12} = \dfrac{5(\vec{q} - \vec{p})}{12}, so ES=512PQES = \dfrac{5}{12}PQ.
  4. EFES=1/25/12=65=1.2\dfrac{EF}{ES} = \dfrac{1/2}{5/12} = \dfrac{6}{5} = 1.2.
AnswerAnswer: 1.20
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Permutations and combinations · +4
Let SS be the set of all seven-digit numbers that can be formed using the digits 0, 1 and 2. For example, 2210222 is in SS, but 0210222 is NOT in SS. Then the number of elements xx in SS such that at least one of the digits 0 and 1 appears exactly twice in xx, is equal to ____.

Tests: Use inclusion–exclusion on digit-count conditions with the 'no leading zero' restriction.

Show solution
  1. Let AA: exactly two 0s; BB: exactly two 1s. We need ∣A∪B∣=∣A∣+∣B∣−∣A∩B∣|A \cup B| = |A| + |B| - |A \cap B|. The first digit cannot be 0.
  2. ∣A∣|A|: the two 0s go in the last 6 places, (62)=15\binom{6}{2} = 15 ways; the other 5 places are 1 or 2, 25=322^5 = 32. ∣A∣=480|A| = 480.
  3. ∣B∣|B|: first digit 1: other 1 in (61)=6\binom{6}{1} = 6 places, rest 0 or 2: 6×25=1926 \times 2^5 = 192. First digit 2: two 1s in (62)=15\binom{6}{2} = 15 ways, rest 0 or 2: 15×24=24015 \times 2^4 = 240. ∣B∣=432|B| = 432.
  4. ∣A∩B∣|A \cap B|: two 0s, two 1s, three 2s: 7!2! 2! 3!=210\dfrac{7!}{2!\,2!\,3!} = 210 strings, minus those starting with 0: 6!1! 2! 3!=60\dfrac{6!}{1!\,2!\,3!} = 60. ∣A∩B∣=150|A \cap B| = 150.
  5. ∣A∪B∣=480+432−150=762|A \cup B| = 480 + 432 - 150 = 762.
AnswerAnswer: 762
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Limits (series expansion) · +4
Let α\alpha and β\beta be the real numbers such that lim⁡x→01x3(α2∫0x11−t2 dt+βxcos⁡x)=2\lim_{x \to 0} \dfrac{1}{x^3}\left(\dfrac{\alpha}{2}\int_0^x \dfrac{1}{1 - t^2}\,dt + \beta x \cos x\right) = 2. Then the value of α+β\alpha + \beta is ____.

Tests: Expand an integral and a product in powers of x and match coefficients to get a given limit.

Show solution
  1. For small tt: 11−t2=1+t2+t4+…\dfrac{1}{1 - t^2} = 1 + t^2 + t^4 + \dots, so ∫0xdt1−t2=x+x33+O(x5)\int_0^x \dfrac{dt}{1 - t^2} = x + \dfrac{x^3}{3} + O(x^5).
  2. βxcos⁡x=βx(1−x22+… )=βx−β2x3+O(x5)\beta x\cos x = \beta x\left(1 - \dfrac{x^2}{2} + \dots\right) = \beta x - \dfrac{\beta}{2}x^3 + O(x^5).
  3. The bracket is (α2+β)x+(α6−β2)x3+O(x5)\left(\dfrac{\alpha}{2} + \beta\right)x + \left(\dfrac{\alpha}{6} - \dfrac{\beta}{2}\right)x^3 + O(x^5).
  4. For a finite limit the xx term must vanish: α2+β=0\dfrac{\alpha}{2} + \beta = 0. The limit is then the x3x^3 coefficient: α6−β2=2\dfrac{\alpha}{6} - \dfrac{\beta}{2} = 2.
  5. β=−α2\beta = -\dfrac{\alpha}{2} gives α6+α4=5α12=2\dfrac{\alpha}{6} + \dfrac{\alpha}{4} = \dfrac{5\alpha}{12} = 2, so α=245\alpha = \dfrac{24}{5}, β=−125\beta = -\dfrac{12}{5}.
  6. α+β=125=2.4\alpha + \beta = \dfrac{12}{5} = 2.4.
AnswerAnswer: 2.40
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Functional equations and GP · +4
Let R\mathbb{R} denote the set of all real numbers. Let f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} be a function such that f(x)>0f(x) > 0 for all x∈Rx \in \mathbb{R}, and f(x+y)=f(x)f(y)f(x + y) = f(x)f(y) for all x,y∈Rx, y \in \mathbb{R}. Let the real numbers a1,a2,…,a50a_1, a_2, \dots, a_{50} be in an arithmetic progression. If f(a31)=64f(a25)f(a_{31}) = 64f(a_{25}), and ∑i=150f(ai)=3(225+1)\sum_{i=1}^{50} f(a_i) = 3(2^{25} + 1), then the value of ∑i=630f(ai)\sum_{i=6}^{30} f(a_i) is ____.

Tests: Use f(x + y) = f(x)f(y) to turn an AP of inputs into a GP of outputs, then sum the GP.

Show solution
  1. With common difference dd: f(ai+1)=f(ai+d)=f(ai)f(d)f(a_{i+1}) = f(a_i + d) = f(a_i)f(d). So f(a1),f(a2),…f(a_1), f(a_2), \dots is a GP with ratio r=f(d)>0r = f(d) > 0.
  2. f(a31)=r6f(a25)=64f(a25)f(a_{31}) = r^6 f(a_{25}) = 64 f(a_{25}), so r6=64r^6 = 64 and r=2r = 2 (positive).
  3. Let c=f(a1)c = f(a_1). ∑i=150f(ai)=c(250−1)=c(225−1)(225+1)=3(225+1)\sum_{i=1}^{50} f(a_i) = c(2^{50} - 1) = c(2^{25} - 1)(2^{25} + 1) = 3(2^{25} + 1), so c=3225−1c = \dfrac{3}{2^{25} - 1}.
  4. ∑i=630f(ai)=c(25+26+⋯+229)=c⋅25(225−1)=3×32=96\sum_{i=6}^{30} f(a_i) = c(2^5 + 2^6 + \dots + 2^{29}) = c \cdot 2^5(2^{25} - 1) = 3 \times 32 = 96.

    Why: 25 terms from 2⁵ to 2²⁹.

AnswerAnswer: 96
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Differential equations (variable separable) and limits · +4
For all x>0x > 0, let y1(x)y_1(x), y2(x)y_2(x) and y3(x)y_3(x) be the functions satisfying dy1dx−(sin⁡x)2y1=0\dfrac{dy_1}{dx} - (\sin x)^2 y_1 = 0, y1(1)=5y_1(1) = 5; dy2dx−(cos⁡x)2y2=0\dfrac{dy_2}{dx} - (\cos x)^2 y_2 = 0, y2(1)=13y_2(1) = \dfrac{1}{3}; dy3dx−(2−x3x3)y3=0\dfrac{dy_3}{dx} - \left(\dfrac{2 - x^3}{x^3}\right)y_3 = 0, y3(1)=35ey_3(1) = \dfrac{3}{5e}, respectively. Then lim⁡x→0+y1(x)y2(x)y3(x)+2xe3xsin⁡x\lim_{x \to 0^+} \dfrac{y_1(x)y_2(x)y_3(x) + 2x}{e^{3x}\sin x} is equal to ____.

Tests: Solve first-order separable equations and combine them before taking a limit.

Show solution
  1. y1=5exp⁡(∫1xsin⁡2t dt)y_1 = 5\exp\left(\int_1^x \sin^2 t\,dt\right) and y2=13exp⁡(∫1xcos⁡2t dt)y_2 = \dfrac{1}{3}\exp\left(\int_1^x \cos^2 t\,dt\right).
  2. Multiply: y1y2=53exp⁡(∫1x(sin⁡2t+cos⁡2t) dt)=53ex−1y_1y_2 = \dfrac{5}{3}\exp\left(\int_1^x (\sin^2 t + \cos^2 t)\,dt\right) = \dfrac{5}{3}e^{x - 1}.

    Why: We never need each integral separately: sin² + cos² = 1.

  3. dy3y3=(2x3−1)dx⇒ln⁡y3=−1x2−x+C\dfrac{dy_3}{y_3} = \left(\dfrac{2}{x^3} - 1\right)dx \Rightarrow \ln y_3 = -\dfrac{1}{x^2} - x + C. At x=1x = 1: y3=Ke−2=35ey_3 = Ke^{-2} = \dfrac{3}{5e}, so K=3e5K = \dfrac{3e}{5} and y3=3e5e−x−1/x2y_3 = \dfrac{3e}{5}e^{-x - 1/x^2}.
  4. y1y2y3=53⋅35⋅ex−1⋅e⋅e−x−1/x2=e−1/x2y_1y_2y_3 = \dfrac{5}{3} \cdot \dfrac{3}{5} \cdot e^{x - 1} \cdot e \cdot e^{-x - 1/x^2} = e^{-1/x^2}.
  5. Limit: e−1/x2e3xsin⁡x+2xe3xsin⁡x\dfrac{e^{-1/x^2}}{e^{3x}\sin x} + \dfrac{2x}{e^{3x}\sin x}. As x→0+x \to 0^+, e−1/x2x→0\dfrac{e^{-1/x^2}}{x} \to 0 (the exponential dies faster than any power) and 2xsin⁡x→2\dfrac{2x}{\sin x} \to 2, e3x→1e^{3x} \to 1.
  6. So the limit is 0+2=20 + 2 = 2.
AnswerAnswer: 2
Ask about this question

Mathematics, Section 4: 3 matching list sets (List-I with four entries, List-II with five), only one option correct: +4 if correct, −1 if wrong, 0 if unanswered

Q14

Mathematics, Question 14 (4 marks)

Statistics (mean deviation, variance) · +4 / −1
Consider the following frequency distribution: Value458961211Frequency5f1f22113\begin{array}{c|ccccccc} \text{Value} & 4 & 5 & 8 & 9 & 6 & 12 & 11 \\ \hline \text{Frequency} & 5 & f_1 & f_2 & 2 & 1 & 1 & 3 \end{array} Suppose that the sum of the frequencies is 19 and the median of this frequency distribution is 6. For the given frequency distribution, let α\alpha denote the mean deviation about the mean, β\beta denote the mean deviation about the median, and σ2\sigma^2 denote the variance. Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) 7f1+9f27f_1 + 9f_2 is equal to(1) 146
(Q) 19α19\alpha is equal to(2) 47
(R) 19β19\beta is equal to(3) 48
(S) 19σ219\sigma^2 is equal to(4) 145
(5) 55
  1. (A)P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 4
  2. (B)P →\rightarrow 5, Q →\rightarrow 2, R →\rightarrow 3, S →\rightarrow 1
  3. (C)P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 1
  4. (D)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 5, S →\rightarrow 4

Tests: Find missing frequencies from the total and the median, then compute mean deviations and variance.

Show solution
  1. Sum of frequencies: 5+f1+f2+2+1+1+3=195 + f_1 + f_2 + 2 + 1 + 1 + 3 = 19, so f1+f2=7f_1 + f_2 = 7.
  2. In order: 4 (5 times), 5 (f1f_1), 6 (1), 8 (f2f_2), 9 (2), 11 (3), 12 (1). With 19 values the median is the 10th. Median 6 needs 5+f1<10≤6+f15 + f_1 < 10 \le 6 + f_1, so f1=4f_1 = 4, f2=3f_2 = 3.
  3. (P) 7×4+9×3=557 \times 4 + 9 \times 3 = 55 →\rightarrow (5).
  4. Mean: 20+20+6+24+18+33+1219=13319=7\dfrac{20 + 20 + 6 + 24 + 18 + 33 + 12}{19} = \dfrac{133}{19} = 7.
  5. (Q) ∑f∣x−7∣=5(3)+4(2)+1(1)+3(1)+2(2)+3(4)+1(5)=48\sum f|x - 7| = 5(3) + 4(2) + 1(1) + 3(1) + 2(2) + 3(4) + 1(5) = 48, so 19α=4819\alpha = 48 →\rightarrow (3).
  6. (R) ∑f∣x−6∣=5(2)+4(1)+0+3(2)+2(3)+3(5)+1(6)=47\sum f|x - 6| = 5(2) + 4(1) + 0 + 3(2) + 2(3) + 3(5) + 1(6) = 47, so 19β=4719\beta = 47 →\rightarrow (2).
  7. (S) ∑f(x−7)2=5(9)+4(4)+1(1)+3(1)+2(4)+3(16)+1(25)=146\sum f(x - 7)^2 = 5(9) + 4(4) + 1(1) + 3(1) + 2(4) + 3(16) + 1(25) = 146, so 19σ2=14619\sigma^2 = 146 →\rightarrow (1).
AnswerAnswer: (C) P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 1
Ask about this question
Q15

Mathematics, Question 15 (4 marks)

Continuity, monotonicity and differentiability · +4 / −1
Let R\mathbb{R} denote the set of all real numbers. For a real number xx, let [x][x] denote the greatest integer less than or equal to xx. Let nn denote a natural number. Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) The minimum value of nn for which the function f(x)=[10x3−45x2+60x+35n]f(x) = \left[\dfrac{10x^3 - 45x^2 + 60x + 35}{n}\right] is continuous on the interval [1,2][1, 2], is(1) 8
(Q) The minimum value of nn for which g(x)=(2n2−13n−15)(x3+3x)g(x) = (2n^2 - 13n - 15)(x^3 + 3x), x∈Rx \in \mathbb{R}, is an increasing function on R\mathbb{R}, is(2) 9
(R) The smallest natural number nn which is greater than 5, such that x=3x = 3 is a point of local minima of h(x)=(x2−9)n(x2+2x+3)h(x) = (x^2 - 9)^n(x^2 + 2x + 3), is(3) 5
(S) Number of x0∈Rx_0 \in \mathbb{R} such that l(x)=∑k=04(sin⁡∣x−k∣+cos⁡∣x−k+12∣)l(x) = \sum_{k=0}^{4}\left(\sin|x - k| + \cos\left|x - k + \dfrac{1}{2}\right|\right), x∈Rx \in \mathbb{R}, is NOT differentiable at x0x_0, is(4) 6
(5) 10
  1. (A)P →\rightarrow 1, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 5
  2. (B)P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 3
  3. (C)P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 3
  4. (D)P →\rightarrow 2, Q →\rightarrow 3, R →\rightarrow 1, S →\rightarrow 5

Tests: Test continuity of a greatest-integer function, monotonicity from a sign, extrema from multiplicity, and corners of |x|.

Show solution
  1. (P) Let p(x)=10x3−45x2+60x+35p(x) = 10x^3 - 45x^2 + 60x + 35. p′(x)=30(x−1)(x−2)≤0p'(x) = 30(x - 1)(x - 2) \le 0 on [1,2][1, 2], so pp falls from p(1)=60p(1) = 60 to p(2)=55p(2) = 55.
  2. p/np/n falls from 60/n60/n to 55/n55/n. [ p/n ][\,p/n\,] jumps wherever p/np/n passes down through an integer, and also at x=1x = 1 if 60/n60/n is an integer (the value just to the right drops). So we need no integer in (55/n,60/n](55/n, 60/n].

    Why: At x = 2 an integer value 55/n is fine: from the left p/n is above it.

  3. n=1n = 1 to 44: the interval has length 5/n≥1.255/n \ge 1.25, so it holds an integer. n=5n = 5: (11,12](11, 12] holds 12. n=6n = 6: (9.17,10](9.17, 10] holds 10. n=7n = 7: (7.86,8.57](7.86, 8.57] holds 8. n=8n = 8: (6.875,7.5](6.875, 7.5] holds 7. n=9n = 9: (6.11,6.67](6.11, 6.67] holds none. So P →\rightarrow 9, (2).
  4. (Q) x3+3xx^3 + 3x is increasing (3x2+3>03x^2 + 3 > 0), so gg is increasing iff 2n2−13n−15=(2n−15)(n+1)>02n^2 - 13n - 15 = (2n - 15)(n + 1) > 0, i.e. n>7.5n > 7.5. Smallest n=8n = 8 (check: 128−104−15=9>0128 - 104 - 15 = 9 > 0). Q →\rightarrow (1).
  5. (R) x2+2x+3=(x+1)2+2>0x^2 + 2x + 3 = (x + 1)^2 + 2 > 0 and h(3)=0h(3) = 0. Near x=3x = 3, (x2−9)n=(x−3)n(x+3)n(x^2 - 9)^n = (x - 3)^n(x + 3)^n has the sign of (x−3)n(x - 3)^n: for odd nn it changes sign (no extremum), for even nn it is ≥0\ge 0 (local minimum). Smallest even n>5n > 5 is 6. R →\rightarrow (4).
  6. (S) cos⁡∣u∣=cos⁡u\cos|u| = \cos u, so every cosine term is differentiable. sin⁡∣x−k∣\sin|x - k| has a corner at x=kx = k (left slope −1-1, right slope +1+1) and is smooth elsewhere.
  7. The corners are at x=0,1,2,3,4x = 0, 1, 2, 3, 4, one from each term, and the other terms are smooth there, so nothing cancels: 5 points. S →\rightarrow (3).
AnswerAnswer: (B) P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 3
Ask about this question
Q16

Mathematics, Question 16 (4 marks)

Vectors (cross product) and linear equations · +4 / −1
Let w⃗=i^+j^−2k^\vec{w} = \hat{i} + \hat{j} - 2\hat{k}, and u⃗\vec{u} and v⃗\vec{v} be two vectors, such that u⃗×v⃗=w⃗\vec{u} \times \vec{v} = \vec{w} and v⃗×w⃗=u⃗\vec{v} \times \vec{w} = \vec{u}. Let α,β,γ\alpha, \beta, \gamma, and tt be real numbers such that u⃗=αi^+βj^+γk^\vec{u} = \alpha\hat{i} + \beta\hat{j} + \gamma\hat{k}, −tα+β+γ=0-t\alpha + \beta + \gamma = 0, α−tβ+γ=0\alpha - t\beta + \gamma = 0, and α+β−tγ=0\alpha + \beta - t\gamma = 0. Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) ∣v⃗∣2|\vec{v}|^2 is equal to(1) 0
(Q) If α=3\alpha = \sqrt{3}, then γ2\gamma^2 is equal to(2) 1
(R) If α=3\alpha = \sqrt{3}, then (β+γ)2(\beta + \gamma)^2 is equal to(3) 2
(S) If α=2\alpha = \sqrt{2}, then t+3t + 3 is equal to(4) 3
(5) 5
  1. (A)P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 5
  2. (B)P →\rightarrow 2, Q →\rightarrow 4, R →\rightarrow 3, S →\rightarrow 5
  3. (C)P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 3
  4. (D)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 3

Tests: Use perpendicularity from cross products to get magnitudes, and a zero determinant for a non-trivial solution.

Show solution
  1. w⃗=u⃗×v⃗\vec{w} = \vec{u} \times \vec{v} is perpendicular to v⃗\vec{v}, and u⃗=v⃗×w⃗\vec{u} = \vec{v} \times \vec{w} is perpendicular to v⃗\vec{v} and w⃗\vec{w}. So u⃗,v⃗,w⃗\vec{u}, \vec{v}, \vec{w} are mutually perpendicular.
  2. Then ∣w⃗∣=∣u⃗∣∣v⃗∣|\vec{w}| = |\vec{u}||\vec{v}| and ∣u⃗∣=∣v⃗∣∣w⃗∣|\vec{u}| = |\vec{v}||\vec{w}|, so ∣w⃗∣=∣v⃗∣2∣w⃗∣|\vec{w}| = |\vec{v}|^2|\vec{w}| and ∣v⃗∣2=1|\vec{v}|^2 = 1. Also ∣u⃗∣=∣w⃗∣=6|\vec{u}| = |\vec{w}| = \sqrt{6}. P →\rightarrow (2).

    Why: |a × b| = |a||b| when a ⟂ b.

  3. So α2+β2+γ2=6\alpha^2 + \beta^2 + \gamma^2 = 6 and u⃗⋅w⃗=α+β−2γ=0\vec{u} \cdot \vec{w} = \alpha + \beta - 2\gamma = 0.
  4. The three equations in α,β,γ\alpha, \beta, \gamma have a non-zero solution, so ∣−t111−t111−t∣=−(t−2)(t+1)2=0\begin{vmatrix} -t & 1 & 1 \\ 1 & -t & 1 \\ 1 & 1 & -t \end{vmatrix} = -(t - 2)(t + 1)^2 = 0: t=2t = 2 or t=−1t = -1.
  5. t=2t = 2: the equations give α=β=γ\alpha = \beta = \gamma; then 3α2=63\alpha^2 = 6, α=±2\alpha = \pm\sqrt{2}. t=−1t = -1: all three equations are α+β+γ=0\alpha + \beta + \gamma = 0; with α+β−2γ=0\alpha + \beta - 2\gamma = 0 this gives γ=0\gamma = 0, β=−α\beta = -\alpha, and 2α2=62\alpha^2 = 6, α=±3\alpha = \pm\sqrt{3}.
  6. (Q) α=3\alpha = \sqrt{3} means t=−1t = -1, γ=0\gamma = 0: γ2=0\gamma^2 = 0 →\rightarrow (1). (R) β+γ=−3\beta + \gamma = -\sqrt{3}, (β+γ)2=3(\beta + \gamma)^2 = 3 →\rightarrow (4).
  7. (S) α=2\alpha = \sqrt{2} is possible only with t=2t = 2, so t+3=5t + 3 = 5 →\rightarrow (5).
AnswerAnswer: (A) P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 5
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Simple harmonic motion (rolling with a spring) · +3 / −1
The center of a disk of radius rr and mass mm is attached to a spring of spring constant kk, inside a ring of radius R>rR > r as shown in the figure. The other end of the spring is attached on the periphery of the ring. Both the ring and the disk are in the same vertical plane. The disk can only roll along the inside periphery of the ring, without slipping. The spring can only be stretched or compressed along the periphery of the ring, following the Hooke's law. In equilibrium, the disk is at the bottom of the ring. Assuming small displacement of the disc, the time period of oscillation of center of mass of the disk is written as T=2πωT = \dfrac{2\pi}{\omega}. The correct expression for ω\omega is (gg is the acceleration due to gravity): (The figure shows a vertical ring of radius RR with the small disk of radius rr resting at its lowest point, touching the inside of the ring; the spring runs along the inside of the ring from the disk's centre, curving up the left side, to a point fixed on the ring.)
  1. (A)23(gR−r+km)\sqrt{\dfrac{2}{3}\left(\dfrac{g}{R-r}+\dfrac{k}{m}\right)}
  2. (B)2g3(R−r)+km\sqrt{\dfrac{2g}{3(R-r)}+\dfrac{k}{m}}
  3. (C)16(gR−r+km)\sqrt{\dfrac{1}{6}\left(\dfrac{g}{R-r}+\dfrac{k}{m}\right)}
  4. (D)14(gR−r+km)\sqrt{\dfrac{1}{4}\left(\dfrac{g}{R-r}+\dfrac{k}{m}\right)}

Tests: Find the angular frequency of SHM when gravity, a spring and rolling all act together.

Show solution
  1. The disk's centre moves on a circle of radius R−rR - r. Let it turn through a small angle ϕ\phi from the bottom; the centre moves an arc s=(R−r)ϕs = (R-r)\phi with speed v=(R−r)ϕ˙v = (R-r)\dot\phi.
  2. Rolling without slipping: the disk spins at v/rv/r, so KE=12mv2+12(12mr2)v2r2=34mv2KE = \tfrac12 mv^2 + \tfrac12\left(\tfrac12 mr^2\right)\dfrac{v^2}{r^2} = \tfrac34 mv^2.

    Why: Rolling adds the spin energy, which is half the translational energy for a disk.

  3. Gravity: the centre rises (R−r)(1−cos⁡ϕ)≈(R−r)ϕ22(R-r)(1-\cos\phi) \approx \dfrac{(R-r)\phi^2}{2}, so Ug≈12mgR−rs2U_g \approx \tfrac12 \dfrac{mg}{R-r}s^2.
  4. Spring: it bends along the ring and its extension is the arc moved by the disk's centre, ss, so Us=12ks2U_s = \tfrac12 ks^2.

    Why: The spring is fixed to the disk's centre and can only stretch along the periphery.

  5. Energy: 34mv2+12(mgR−r+k)s2=const\tfrac34 mv^2 + \tfrac12\left(\dfrac{mg}{R-r} + k\right)s^2 = \text{const}, so 32ms¨=−(mgR−r+k)s\tfrac32 m\ddot s = -\left(\dfrac{mg}{R-r}+k\right)s.
  6. ω2=23(gR−r+km)\omega^2 = \dfrac{2}{3}\left(\dfrac{g}{R-r}+\dfrac{k}{m}\right).
AnswerAnswer: (A) ω=23(gR−r+km)\omega = \sqrt{\dfrac{2}{3}\left(\dfrac{g}{R-r}+\dfrac{k}{m}\right)}
Ask about this question
Q2

Physics, Question 2 (3 marks)

Collisions (elastic, two dimensions) · +3 / −1
In a scattering experiment, a particle of mass 2m2m collides with another particle of mass mm, which is initially at rest. Assuming the collision to be perfectly elastic, the maximum angular deviation θ\theta of the heavier particle, as shown in the figure, in radians is: (The figure shows 2m2m moving along a horizontal line towards mm at rest; after the collision 2m2m moves off at angle θ\theta above the original line and mm moves off below it.)
  1. (A)π\pi
  2. (B)tan⁡−1(12)\tan^{-1}\left(\dfrac{1}{2}\right)
  3. (C)π3\dfrac{\pi}{3}
  4. (D)π6\dfrac{\pi}{6}

Tests: Use the centre-of-mass frame to find the largest scattering angle in an elastic collision.

Show solution
  1. Let 2m2m come in with speed uu. Centre of mass speed: V=2m u3m=2u3V = \dfrac{2m\,u}{3m} = \dfrac{2u}{3}.
  2. In the CM frame the heavy particle moves at u−V=u3u - V = \dfrac{u}{3}. An elastic collision keeps this speed and only turns its direction, which can be anything.

    Why: In the CM frame an elastic collision only rotates the velocities.

  3. Back in the lab: v⃗=V⃗+u3n^\vec v = \vec V + \dfrac{u}{3}\hat n. The tip of v⃗\vec v lies on a circle of radius u/3u/3 centred at the tip of V⃗\vec V (length 2u/32u/3).
  4. The largest angle is when v⃗\vec v is tangent to that circle: sin⁡θmax=u/32u/3=12\sin\theta_{max} = \dfrac{u/3}{2u/3} = \dfrac12, so θmax=π6\theta_{max} = \dfrac{\pi}{6}.
AnswerAnswer: (D) π6\dfrac{\pi}{6}
Ask about this question
Q3

Physics, Question 3 (3 marks)

Electromagnetic induction (rotating loop, time-varying field) · +3 / −1
A conducting square loop initially lies in the XZXZ plane with its lower edge hinged along the XX-axis. Only in the region y≥0y \ge 0, there is a time dependent magnetic field pointing along the ZZ-direction, B⃗(t)=B0(cos⁡ωt)k^\vec B(t) = B_0(\cos\omega t)\hat k, where B0B_0 is a constant. The magnetic field is zero everywhere else. At time t=0t = 0, the loop starts rotating with constant angular speed ω\omega about the XX axis in the clockwise direction as viewed from the +X+X axis (as shown in the figure). Ignoring self-inductance of the loop and gravity, which of the following plots correctly represents the induced e.m.f. (VV) in the loop as a function of time: (The figure shows the loop hinged on the XX-axis, tilted from the ZZ-axis towards the +Y+Y side by the angle ωt\omega t, with B⃗(t)\vec B(t) pointing up along ZZ in the region y≥0y \ge 0.)
  1. (A)Graph of VV against tt up to 3π/ω3\pi/\omega: VV starts at its negative minimum at t=0t = 0, rises through zero to a positive maximum and returns to the minimum at t=π/ωt = \pi/\omega; then V=0V = 0 from π/ω\pi/\omega to 2π/ω2\pi/\omega; at 2π/ω2\pi/\omega it jumps back to the minimum and the same cycle repeats up to 3π/ω3\pi/\omega.
  2. (B)Graph of VV against tt up to 2π/ω2\pi/\omega: one sine-like cycle starting at zero, negative first (minimum near π/2ω\pi/2\omega), crossing zero at π/ω\pi/\omega, positive maximum near 3π/2ω3\pi/2\omega, back to zero at 2π/ω2\pi/\omega.
  3. (C)Graph of VV against tt up to 2π/ω2\pi/\omega: one cosine-like cycle starting at its negative minimum, rising to a positive maximum at π/ω\pi/\omega, back to the minimum at 2π/ω2\pi/\omega.
  4. (D)Graph of VV against tt up to 3π/ω3\pi/\omega: VV starts at zero, goes negative, then positive, and returns to zero at π/ω\pi/\omega (one full sine-like cycle); then V=0V = 0 from π/ω\pi/\omega to 2π/ω2\pi/\omega; the same cycle repeats from 2π/ω2\pi/\omega to 3π/ω3\pi/\omega.

Tests: Find the emf when both the field and the loop's orientation change with time, and the field fills only half the space.

Show solution
  1. Let the side be aa. After time tt the loop makes angle ωt\omega t with the ZZ-axis, tilted towards +Y+Y; for 0≤ωt≤π0 \le \omega t \le \pi every point of it has y≥0y \ge 0, and for π<ωt<2π\pi < \omega t < 2\pi it lies in y<0y < 0 where B=0B = 0.
  2. The component of k^\hat k along the loop's normal is sin⁡ωt\sin\omega t (zero at t=0t = 0, when BB lies in the loop's plane). So for 0≤ωt≤π0 \le \omega t \le \pi: Φ=a2B0cos⁡ωt sin⁡ωt=a2B02sin⁡2ωt\Phi = a^2 B_0\cos\omega t\,\sin\omega t = \dfrac{a^2B_0}{2}\sin 2\omega t.

    Why: Two factors: the field itself changes as cos ωt and the loop's projected area changes as sin ωt.

  3. V=−dΦdt=−a2B0 ωcos⁡2ωtV = -\dfrac{d\Phi}{dt} = -a^2B_0\,\omega\cos 2\omega t for 0<t<π/ω0 < t < \pi/\omega: it starts at −a2B0ω-a^2B_0\omega, reaches +a2B0ω+a^2B_0\omega at t=π/2ωt = \pi/2\omega and is back at −a2B0ω-a^2B_0\omega at t=π/ωt = \pi/\omega.
  4. For π/ω<t<2π/ω\pi/\omega < t < 2\pi/\omega the loop is in the field-free region: Φ=0\Phi = 0, V=0V = 0. At t=2π/ωt = 2\pi/\omega the loop re-enters y≥0y \ge 0 and the same −cos⁡2ωt-\cos 2\omega t cycle repeats.
  5. (B) and (C) have no zero stretch, so they ignore the field-free half turn. (D) starts at V=0V = 0, but ∣V∣|V| is largest at t=0t = 0. Only (A) fits.
AnswerAnswer: (A)
Ask about this question
Q4

Physics, Question 4 (3 marks)

Vernier callipers · +3 / −1
Figure 1 shows the configuration of main scale and Vernier scale before measurement. Fig. 2 shows the configuration corresponding to the measurement of diameter DD of a tube. The measured value of DD is: (Fig. 1: the main scale runs from 0 to 1 cm in 10 equal divisions of 1 mm. The Vernier scale has 10 divisions whose total length equals 7 main-scale divisions, and its zero coincides with the main-scale zero. Fig. 2: the Vernier zero lies between the 1 mm and 2 mm marks of the main scale, and the first Vernier mark after its zero coincides with the 2 mm mark of the main scale.)
  1. (A)0.12 cm
  2. (B)0.11 cm
  3. (C)0.13 cm
  4. (D)0.14 cm

Tests: Read a Vernier scale whose divisions are not the usual 9 MSD = 10 VSD.

Show solution
  1. Fig. 1: 10 Vernier divisions = 7 main-scale divisions, so 1 VSD =0.7= 0.7 mm and the zeros coincide: no zero error.
  2. Least count =1 MSD−1 VSD=1−0.7=0.3= 1\text{ MSD} - 1\text{ VSD} = 1 - 0.7 = 0.3 mm.

    Why: This Vernier is unusual (10 VSD = 7 MSD), so read the least count off the figure, not from habit.

  3. Fig. 2: main-scale reading (last mark before the Vernier zero) =1= 1 mm; the 1st Vernier mark coincides with a main-scale mark.
  4. D=1+1×0.3=1.3D = 1 + 1 \times 0.3 = 1.3 mm =0.13= 0.13 cm. Check: the coinciding mark is at 2 mm, so the Vernier zero is at 2−0.7=1.32 - 0.7 = 1.3 mm.
AnswerAnswer: (C) 0.13 cm
Ask about this question

Physics, Section 2: 3 questions, one or more options correct: +4 if all correct options are chosen; +3, +2 or +1 when only some correct options are chosen and no wrong one; 0 if unanswered; −2 in all other cases

Q5

Physics, Question 5 (4 marks)

Electromagnetic induction (magnetic braking) · +4 / −2
A conducting square loop of side LL, mass MM and resistance RR is moving in the XYXY plane with its edges parallel to the XX and YY axes. The region y≥0y \ge 0 has a uniform magnetic field, B⃗=B0k^\vec B = B_0\hat k. The magnetic field is zero everywhere else. At time t=0t = 0, the loop starts to enter the magnetic field with an initial velocity v0j^v_0\hat j m/s, as shown in the figure. Considering the quantity K=B02L2RMK = \dfrac{B_0^2L^2}{RM} in appropriate units, ignoring self-inductance of the loop and gravity, which of the following statements is/are correct: (The figure shows the loop in y<0y < 0 with its leading edge on the XX-axis, moving in +Y+Y towards the shaded field region y≥0y \ge 0, where B⃗\vec B points along +Z+Z.)
  1. (A)If v0=1.5KLv_0 = 1.5KL, the loop will stop before it enters completely inside the region of magnetic field.
  2. (B)When the complete loop is inside the region of magnetic field, the net force acting on the loop is zero.
  3. (C)If v0=KL10v_0 = \dfrac{KL}{10}, the loop comes to rest at t=(1K)ln⁡(52)t = \left(\dfrac{1}{K}\right)\ln\left(\dfrac{5}{2}\right).
  4. (D)If v0=3KLv_0 = 3KL, the complete loop enters inside the region of magnetic field at time t=(1K)ln⁡(32)t = \left(\dfrac{1}{K}\right)\ln\left(\dfrac{3}{2}\right).

Tests: Solve the motion of a loop slowed by an induced current: v falls linearly with distance and exponentially with time.

Show solution
  1. While entering, only the leading edge is in the field: emf =B0Lv= B_0Lv, current I=B0LvRI = \dfrac{B_0Lv}{R}, retarding force F=B0IL=B02L2vRF = B_0IL = \dfrac{B_0^2L^2v}{R}.
  2. Mdvdt=−B02L2RvM\dfrac{dv}{dt} = -\dfrac{B_0^2L^2}{R}v, so dvdt=−Kv\dfrac{dv}{dt} = -Kv and v=v0e−Ktv = v_0e^{-Kt}. With dvdt=vdvdx\dfrac{dv}{dt} = v\dfrac{dv}{dx}: dvdx=−K\dfrac{dv}{dx} = -K, so v=v0−Kxv = v_0 - Kx.

    Why: The speed falls linearly with distance and exponentially with time.

  3. (A) False. The loop is fully in after x=Lx = L, where v=v0−KL=0.5KL>0v = v_0 - KL = 0.5KL > 0: it does not stop before entering completely.
  4. (B) True. Fully inside, the flux B0L2B_0L^2 is constant: no emf, no current, no force.
  5. (C) False. v0=KL/10<KLv_0 = KL/10 < KL, so the loop stops after x=v0/K=L/10x = v_0/K = L/10, but v=v0e−Ktv = v_0e^{-Kt} never becomes zero in a finite time: it comes to rest only as t→∞t \to \infty.
  6. (D) True. x=v0K(1−e−Kt)=3L(1−e−Kt)x = \dfrac{v_0}{K}(1 - e^{-Kt}) = 3L(1 - e^{-Kt}). Setting x=Lx = L: e−Kt=23e^{-Kt} = \dfrac23, t=1Kln⁡32t = \dfrac1K\ln\dfrac32.
AnswerAnswer: (B), (D)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Significant figures · +4 / −2
Length, breadth and thickness of a strip having a uniform cross section are measured to be 10.5 cm, 0.05 mm, and 6.0 μ\mum, respectively. Which of the following option(s) give(s) the volume of the strip in cm3\text{cm}^3 with correct significant figures:
  1. (A)3.2×10−53.2 \times 10^{-5}
  2. (B)32.0×10−632.0 \times 10^{-6}
  3. (C)3.0×10−53.0 \times 10^{-5}
  4. (D)3×10−53 \times 10^{-5}

Tests: Keep the right number of significant figures in a product of measurements.

Show solution
  1. In cm: l=10.5l = 10.5, b=0.05 mm=0.005b = 0.05\text{ mm} = 0.005 cm, t=6.0 μm=6.0×10−4t = 6.0\ \mu\text{m} = 6.0 \times 10^{-4} cm.
  2. V=10.5×0.005×6.0×10−4=3.15×10−5 cm3V = 10.5 \times 0.005 \times 6.0 \times 10^{-4} = 3.15 \times 10^{-5}\ \text{cm}^3.
  3. Significant figures: 10.5 has 3, 0.05 has 1 (leading zeros don't count), 6.0 has 2. A product keeps the fewest: 1.

    Why: Multiplication: the answer is only as precise as the least precise factor.

  4. So V=3×10−5 cm3V = 3 \times 10^{-5}\ \text{cm}^3. (A) and (C) have 2 significant figures and (B) has 3: all wrong.
AnswerAnswer: (D) 3×10−5 cm33 \times 10^{-5}\ \text{cm}^3
Ask about this question
Q7

Physics, Question 7 (4 marks)

Waves on strings (reflection and transmission) · +4 / −2
Consider a system of three connected strings, S1S_1, S2S_2 and S3S_3 with uniform linear mass densities μ\mu kg/m, 4μ4\mu kg/m and 16μ16\mu kg/m, respectively, as shown in the figure. S1S_1 and S2S_2 are connected at the point PP, whereas S2S_2 and S3S_3 are connected at the point QQ, and the other end of S3S_3 is connected to a wall. A wave generator O is connected to the free end of S1S_1. The wave from the generator is represented by y=y0cos⁡(ωt−kx)y = y_0\cos(\omega t - kx) cm, where y0y_0, ω\omega and kk are constants of appropriate dimensions. Which of the following statements is/are correct: (The figure shows, from left to right along +X+X: the generator O, string S1S_1 (μ\mu), joint PP, string S2S_2 (4μ4\mu), joint QQ, string S3S_3 (16μ16\mu), and the wall.)
  1. (A)When the wave reflects from PP for the first time, the reflected wave is represented by y=α1y0cos⁡(ωt+kx+π)y = \alpha_1 y_0\cos(\omega t + kx + \pi) cm, where α1\alpha_1 is a positive constant.
  2. (B)When the wave transmits through PP for the first time, the transmitted wave is represented by y=α2y0cos⁡(ωt−kx)y = \alpha_2 y_0\cos(\omega t - kx) cm, where α2\alpha_2 is a positive constant.
  3. (C)When the wave reflects from QQ for the first time, the reflected wave is represented by y=α3y0cos⁡(ωt−kx+π)y = \alpha_3 y_0\cos(\omega t - kx + \pi) cm, where α3\alpha_3 is a positive constant.
  4. (D)When the wave transmits through QQ for the first time, the transmitted wave is represented by y=α4y0cos⁡(ωt−4kx)y = \alpha_4 y_0\cos(\omega t - 4kx) cm, where α4\alpha_4 is a positive constant.

Tests: Find the direction, wave number and phase change of reflected and transmitted waves at a joint between strings.

Show solution
  1. The strings are joined in a line, so the tension TT is the same. v=T/μv = \sqrt{T/\mu}: v1=vv_1 = v, v2=v/2v_2 = v/2, v3=v/4v_3 = v/4. The frequency stays ω\omega, so k=ω/vk = \omega/v: k1=kk_1 = k, k2=2kk_2 = 2k, k3=4kk_3 = 4k.
  2. At each joint the wave goes into a denser string, so the reflected wave is inverted (phase π\pi) and the transmitted wave is not; both amplitude ratios ∣Z1−Z2∣Z1+Z2\dfrac{|Z_1 - Z_2|}{Z_1 + Z_2} and 2Z1Z1+Z2\dfrac{2Z_1}{Z_1+Z_2} (Z∝μZ \propto \sqrt\mu) are positive numbers.

    Why: A heavier string acts like a partly fixed end.

  3. (A) True. Reflected at PP: back in S1S_1 (kk), moving along −x-x, inverted: α1y0cos⁡(ωt+kx+π)\alpha_1y_0\cos(\omega t + kx + \pi) with α1=1/3\alpha_1 = 1/3.
  4. (B) False. Transmitted into S2S_2 the wave number is 2k2k: α2y0cos⁡(ωt−2kx)\alpha_2y_0\cos(\omega t - 2kx), not −kx-kx.
  5. (C) False. Reflected at QQ the wave is in S2S_2 moving along −x-x: α3y0cos⁡(ωt+2kx+π)\alpha_3y_0\cos(\omega t + 2kx + \pi). The option has −kx-kx (wrong direction and wrong wave number).
  6. (D) True. Transmitted into S3S_3: wave number 4k4k, along +x+x, no phase change: α4y0cos⁡(ωt−4kx)\alpha_4y_0\cos(\omega t - 4kx) with α4=23⋅23=49\alpha_4 = \tfrac23 \cdot \tfrac23 = \tfrac49.
AnswerAnswer: (A), (D)
Ask about this question

Physics, Section 3: 6 questions, numerical value (truncate or round off to two decimal places): +4 if correct, 0 in all other cases

Q8

Physics, Question 8 (4 marks)

Apparent weight (SHM of an elevator) · +4
A person sitting inside an elevator performs a weighing experiment with an object of mass 50 kg. Suppose that the variation of the height yy (in m) of the elevator, from the ground, with time tt (in s) is given by y=8[1+sin⁡(2πtT)]y = 8\left[1 + \sin\left(\dfrac{2\pi t}{T}\right)\right], where T=40πT = 40\pi s. Taking acceleration due to gravity, g=10 m/s2g = 10\ \text{m/s}^2, the maximum variation of the object's weight (in N) as observed in the experiment is ____

Tests: Find the apparent weight in an accelerating lift whose height varies as SHM.

Show solution
  1. The elevator moves in SHM about y=8y = 8 m with amplitude A=8A = 8 m and ω=2πT=2π40π=120 s−1\omega = \dfrac{2\pi}{T} = \dfrac{2\pi}{40\pi} = \dfrac{1}{20}\ \text{s}^{-1}.
  2. Maximum acceleration: amax=ω2A=8400=0.02 m/s2a_{max} = \omega^2 A = \dfrac{8}{400} = 0.02\ \text{m/s}^2.
  3. Apparent weight W=m(g+a)W = m(g + a), with aa (upward positive) between −0.02-0.02 and +0.02+0.02 m/s².
  4. Maximum variation =Wmax−Wmin=2mamax=2×50×0.02=2= W_{max} - W_{min} = 2ma_{max} = 2 \times 50 \times 0.02 = 2 N.

    Why: Variation means the spread from the largest to the smallest reading.

AnswerAnswer: 2
Ask about this question
Q9

Physics, Question 9 (4 marks)

Electromagnetic waves (energy density) · +4
A cube of unit volume contains 35×10735 \times 10^7 photons of frequency 101510^{15} Hz. If the energy of all the photons is viewed as the average energy being contained in the electromagnetic waves within the same volume, then the amplitude of the magnetic field is α×10−9\alpha \times 10^{-9} T. Taking permeability of free space μ0=4π×10−7\mu_0 = 4\pi \times 10^{-7} Tm/A, Planck's constant h=6×10−34h = 6 \times 10^{-34} Js and π=227\pi = \dfrac{22}{7}, the value of α\alpha is ____

Tests: Link photon number density to the field amplitude of an EM wave through energy density.

Show solution
  1. Energy density: u=Nhν=35×107×6×10−34×1015=2.1×10−10 J/m3u = Nh\nu = 35 \times 10^7 \times 6 \times 10^{-34} \times 10^{15} = 2.1 \times 10^{-10}\ \text{J/m}^3.
  2. Average energy density of an EM wave (electric and magnetic parts together): u=B022μ0u = \dfrac{B_0^2}{2\mu_0}.

    Why: Each field holds half the energy; the average of the square of a sine is one half.

  3. B02=2μ0u=2×887×10−7×2.1×10−10=52.8×10−17=5.28×10−16B_0^2 = 2\mu_0u = 2 \times \dfrac{88}{7} \times 10^{-7} \times 2.1 \times 10^{-10} = 52.8 \times 10^{-17} = 5.28 \times 10^{-16} (with 4π=88/74\pi = 88/7).
  4. B0=2.298×10−8B_0 = 2.298 \times 10^{-8} T =22.98×10−9= 22.98 \times 10^{-9} T, so α≈22.98\alpha \approx 22.98 (key range 21 to 25).
AnswerAnswer: 22.98 (accepted range 21 to 25)
Ask about this question
Q10

Physics, Question 10 (4 marks)

Thermal radiation (radiation shields) · +4
Two identical plates P and Q, radiating as perfect black bodies, are kept in vacuum at constant absolute temperatures TPT_P and TQT_Q, respectively, with TQ<TPT_Q < T_P, as shown in Fig. 1. The radiated power transferred per unit area from P to Q is W0W_0. Subsequently, two more plates, identical to P and Q, are introduced between P and Q, as shown in Fig. 2. Assume that heat transfer takes place only between adjacent plates. If the power transferred per unit area in the direction from P to Q (Fig. 2) in the steady state is WSW_S, then the ratio W0WS\dfrac{W_0}{W_S} is ____ (Fig. 1 shows the two parallel plates P and Q with W0W_0 flowing from P to Q; Fig. 2 shows four parallel plates, P, two new plates, Q, with WSW_S flowing from P to the first new plate.)

Tests: Use steady-state energy balance for black plates placed between a hot and a cold plate.

Show solution
  1. Fig. 1: W0=σ(TP4−TQ4)W_0 = \sigma(T_P^4 - T_Q^4).
  2. Fig. 2: let the new plates be at T1T_1, T2T_2. In steady state each gap carries the same flux: WS=σ(TP4−T14)=σ(T14−T24)=σ(T24−TQ4)W_S = \sigma(T_P^4 - T_1^4) = \sigma(T_1^4 - T_2^4) = \sigma(T_2^4 - T_Q^4).

    Why: A plate in steady state gains as much as it loses, so the flux through every gap is equal.

  3. Adding the three: 3WS=σ(TP4−TQ4)=W03W_S = \sigma(T_P^4 - T_Q^4) = W_0.
  4. W0WS=3\dfrac{W_0}{W_S} = 3.
AnswerAnswer: 3
Ask about this question
Q11

Physics, Question 11 (4 marks)

Polarisation by reflection (Brewster angle) and refraction · +4
A solid glass sphere of refractive index n=3n = \sqrt3 and radius RR contains a spherical air cavity of radius R2\dfrac{R}{2}, as shown in the figure. A very thin glass layer is present at the point O so that the air cavity (refractive index n=1n = 1) remains inside the glass sphere. An unpolarized, unidirectional and monochromatic light source SS emits a light ray from a point inside the glass sphere towards the periphery of the glass sphere. If the light is reflected from the point O and is fully polarized, then the angle of incidence at the inner surface of the glass sphere is θ\theta. The value of sin⁡θ\sin\theta is ____ (The figure shows the glass sphere in air with the air cavity in its lower part: the cavity's centre is R/2R/2 below the sphere's centre on the vertical diameter, so the cavity touches the sphere's surface at its lowest point O, where only a very thin glass layer separates it from the outside. S is in the glass in the upper-left part and sends its ray up to the sphere's inner surface, where the angle of incidence θ\theta is marked.)

Tests: Combine Brewster's law, Snell's law and circle geometry to trace a ray inside a sphere.

Show solution
  1. Take the sphere's centre as origin: O =(0,−R)= (0, -R), cavity centre (0,−R/2)(0, -R/2). Any ray from the glass that heads for O must cross the air cavity, so it reaches O from the air side and reflects at the thin glass layer there.
  2. Fully polarised reflection at O (air to glass): Brewster angle tan⁡θB=3\tan\theta_B = \sqrt3, θB=60∘\theta_B = 60^\circ from the vertical normal at O.
  3. A straight chord of the cavity makes equal angles with the radius at both ends, so the ray entered the cavity at C at 60∘60^\circ to the cavity's normal. The chord from O is 2⋅R2cos⁡60∘=R22 \cdot \dfrac R2 \cos 60^\circ = \dfrac R2 long, so C =(−3R4,−3R4)= \left(-\dfrac{\sqrt3R}{4}, -\dfrac{3R}{4}\right).
  4. Snell at C (glass to air): 3sin⁡β=sin⁡60∘\sqrt3\sin\beta = \sin 60^\circ, so β=30∘\beta = 30^\circ. The cavity normal at C is 30∘30^\circ above the horizontal and the air ray 30∘30^\circ below it, so the glass ray, 30∘30^\circ from the normal on the same side, is horizontal: the line y=−3R4y = -\dfrac{3R}{4}.

    Why: The refracted and incident rays lie on the same side of the normal's tangent direction.

  5. A straight line at distance dd from the centre meets the sphere at incidence sin⁡θ=d/R\sin\theta = d/R, and reflection keeps dd. Here d=3R4d = \dfrac{3R}{4}: sin⁡θ=0.75\sin\theta = 0.75. Since 0.75>1/30.75 > 1/\sqrt3, the reflection at the inner surface is total, as the question says.
  6. Why the key also accepts 0.5: if the cavity is ignored and the ray goes straight through glass to O, Brewster for glass to air gives tan⁡θB=1/3\tan\theta_B = 1/\sqrt3, 30∘30^\circ, and the chord property gives θ=30∘\theta = 30^\circ, sin⁡θ=0.5\sin\theta = 0.5 (the path the figure sketches). That chord passes through the cavity, so the strict answer is 0.75; the key accepts both.
AnswerAnswer: 0.75 (the key accepts 0.5 OR 0.75)
Ask about this question
Q12

Physics, Question 12 (4 marks)

Errors in measurement (single-slit diffraction) · +4
A single slit diffraction experiment is performed to determine the slit width using the equation, bdD=mλ\dfrac{bd}{D} = m\lambda, where bb is the slit width, DD the shortest distance between the slit and the screen, dd the distance between the mthm^{\text{th}} diffraction maximum and the central maximum, and λ\lambda is the wavelength. DD and dd are measured with scales of least count of 1 cm and 1 mm, respectively. The values of λ\lambda and mm are known precisely to be 600 nm and 3, respectively. The absolute error (in μ\mum) in the value of bb estimated using the diffraction maximum that occurs for m=3m = 3 with d=5d = 5 mm and D=1D = 1 m is ____

Tests: Propagate least-count errors through a formula with a quotient.

Show solution
  1. b=mλDd=3×600×10−9×15×10−3=3.6×10−4b = \dfrac{m\lambda D}{d} = \dfrac{3 \times 600 \times 10^{-9} \times 1}{5 \times 10^{-3}} = 3.6 \times 10^{-4} m =360 μ= 360\ \mum.
  2. Errors: ΔD=1\Delta D = 1 cm =0.01= 0.01 m, Δd=1\Delta d = 1 mm (one least count each); λ\lambda and mm are exact.
  3. Δbb=ΔDD+Δdd=0.01+0.2=0.21\dfrac{\Delta b}{b} = \dfrac{\Delta D}{D} + \dfrac{\Delta d}{d} = 0.01 + 0.2 = 0.21.

    Why: For a product or quotient, fractional errors add.

  4. Δb=0.21×360=75.6 μ\Delta b = 0.21 \times 360 = 75.6\ \mum.
  5. Why the key also accepts 94 to 95: taking the largest possible value instead, bmax=mλ(D+ΔD)d−Δd=1.8×10−6×1.014×10−3=454.5 μb_{max} = \dfrac{m\lambda(D + \Delta D)}{d - \Delta d} = \dfrac{1.8 \times 10^{-6} \times 1.01}{4 \times 10^{-3}} = 454.5\ \mum, which is 94.5 μ94.5\ \mum above 360. The question names no method, so both are accepted.
AnswerAnswer: 75.60 (the key accepts 75 to 79 OR 94 to 95)
Ask about this question
Q13

Physics, Question 13 (4 marks)

Bohr model and de Broglie wavelength · +4
Consider an electron in the n=3n = 3 orbit of a hydrogen-like atom with atomic number ZZ. At absolute temperature TT, a neutron having thermal energy kBTk_BT has the same de Broglie wavelength as that of this electron. If this temperature is given by T=Z2h2απ2a02mNkBT = \dfrac{Z^2h^2}{\alpha\pi^2a_0^2m_Nk_B}, (where hh is the Planck's constant, kBk_B is the Boltzmann constant, mNm_N is the mass of the neutron and a0a_0 is the first Bohr radius of hydrogen atom) then the value of α\alpha is ____

Tests: Equate the de Broglie wavelength of a Bohr-orbit electron and a thermal neutron.

Show solution
  1. Bohr: 2πrn=nλe2\pi r_n = n\lambda_e with rn=n2a0Zr_n = \dfrac{n^2a_0}{Z}, so λe=2πrnn=2πna0Z=6πa0Z\lambda_e = \dfrac{2\pi r_n}{n} = \dfrac{2\pi na_0}{Z} = \dfrac{6\pi a_0}{Z} for n=3n = 3.

    Why: A whole number of de Broglie wavelengths fits around a Bohr orbit.

  2. Neutron with kinetic energy kBTk_BT: p=2mNkBTp = \sqrt{2m_Nk_BT}, λN=h2mNkBT\lambda_N = \dfrac{h}{\sqrt{2m_Nk_BT}}.
  3. Equal wavelengths: h22mNkBT=36π2a02Z2\dfrac{h^2}{2m_Nk_BT} = \dfrac{36\pi^2a_0^2}{Z^2}, so T=Z2h272π2a02mNkBT = \dfrac{Z^2h^2}{72\pi^2a_0^2m_Nk_B}.
  4. α=72\alpha = 72.
AnswerAnswer: 72
Ask about this question

Physics, Section 4: 3 List-I / List-II matching questions, only one option correct: +4 if correct, −1 if wrong, 0 if unanswered

Q14

Physics, Question 14 (4 marks)

Electric dipoles (field of a dipole pair) · +4 / −1
List-I shows four configurations, each consisting of a pair of ideal electric dipoles. Each dipole has a dipole moment of magnitude pp, oriented as marked by arrows in the figures. In all the configurations the dipoles are fixed such that they are at a distance 2r2r apart along the xx direction. The midpoint of the line joining the two dipoles is XX. The possible resultant electric fields E⃗\vec E at XX are given in List-II. Choose the option that describes the correct match between the entries in List-I to those in List-II. (In each figure the left dipole is at distance rr to the left of X and the right dipole at distance rr to its right, with axes i^\hat i to the right and j^\hat j up.)
List-IList-II
(P) Both dipoles point along +j^+\hat j(1) E⃗=0\vec E = 0
(Q) Left dipole along +j^+\hat j, right dipole along −j^-\hat j(2) E⃗=−p2πϵ0r3j^\vec E = -\dfrac{p}{2\pi\epsilon_0r^3}\hat j
(R) Left dipole along +j^+\hat j, right dipole along +i^+\hat i(3) E⃗=−p4πϵ0r3(i^−j^)\vec E = -\dfrac{p}{4\pi\epsilon_0r^3}(\hat i - \hat j)
(S) Both dipoles point along +i^+\hat i(4) E⃗=p4πϵ0r3(2i^−j^)\vec E = \dfrac{p}{4\pi\epsilon_0r^3}(2\hat i - \hat j)
(5) E⃗=pπϵ0r3i^\vec E = \dfrac{p}{\pi\epsilon_0r^3}\hat i
  1. (A)P →\rightarrow 3, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 4
  2. (B)P →\rightarrow 4, Q →\rightarrow 5, R →\rightarrow 3, S →\rightarrow 1
  3. (C)P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 5
  4. (D)P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 3, S →\rightarrow 5

Tests: Add axial and equatorial dipole fields as vectors.

Show solution
  1. Let E0=p4πϵ0r3E_0 = \dfrac{p}{4\pi\epsilon_0r^3}. A dipole along ±j^\pm\hat j has X on its equatorial line: field E0E_0 opposite to p⃗\vec p. A dipole along i^\hat i has X on its axis: field 2E02E_0 along p⃗\vec p.
  2. (P) −E0j^−E0j^=−2E0j^=−p2πϵ0r3j^-E_0\hat j - E_0\hat j = -2E_0\hat j = -\dfrac{p}{2\pi\epsilon_0r^3}\hat j: (2).
  3. (Q) −E0j^+E0j^=0-E_0\hat j + E_0\hat j = 0: (1).
  4. (R) −E0j^+2E0i^=p4πϵ0r3(2i^−j^)-E_0\hat j + 2E_0\hat i = \dfrac{p}{4\pi\epsilon_0r^3}(2\hat i - \hat j): (4).
  5. (S) 2E0i^+2E0i^=4E0i^=pπϵ0r3i^2E_0\hat i + 2E_0\hat i = 4E_0\hat i = \dfrac{p}{\pi\epsilon_0r^3}\hat i: (5).

    Why: On the axis the field points along p on both sides of the dipole.

AnswerAnswer: (C) P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 5
Ask about this question
Q15

Physics, Question 15 (4 marks)

Alternating current (series LCR circuits) · +4 / −1
A circuit with an electrical load having impedance ZZ is connected with an AC source as shown in the diagram. The source voltage varies in time as V(t)=300sin⁡(400t)V(t) = 300\sin(400t) V, where tt is time in s. List-I shows various options for the load. The possible currents i(t)i(t) in the circuit as a function of time are given in List-II. Choose the option that describes the correct match between the entries in List-I to those in List-II. (The diagram shows the load Z in series with the AC source V(t)V(t). Each List-II entry is a graph of i(t)i(t) against 400t400t from 0 to 2π2\pi.)
List-IList-II
(P) a 30 Ω\Omega resistor(1) amplitude 5, starts at 0, maximum at 400t=π/2400t = \pi/2, minimum at 3π/23\pi/2
(Q) 30 Ω\Omega in series with 100 mH(2) amplitude about 6, positive (near 5) at t=0t = 0, maximum shortly after 0, minimum a little after π\pi
(R) 50 μ\muF, 30 Ω\Omega and 25 mH in series(3) amplitude 10, starts at 0, maximum at 400t=π/2400t = \pi/2, minimum at 3π/23\pi/2
(S) 50 μ\muF, 60 Ω\Omega and 125 mH in series(4) amplitude 20, minimum (−20-20) at t=0t = 0, maximum at 400t=π400t = \pi
(5) amplitude about 6, negative (near −5-5) at t=0t = 0, maximum a little before π\pi, minimum a little before 2π2\pi
  1. (A)P →\rightarrow 3, Q →\rightarrow 5, R →\rightarrow 2, S →\rightarrow 1
  2. (B)P →\rightarrow 1, Q →\rightarrow 5, R →\rightarrow 2, S →\rightarrow 3
  3. (C)P →\rightarrow 3, Q →\rightarrow 4, R →\rightarrow 2, S →\rightarrow 1
  4. (D)P →\rightarrow 1, Q →\rightarrow 4, R →\rightarrow 2, S →\rightarrow 5

Tests: Find the amplitude and phase of the current in series RL, RC-like and resonant LCR circuits.

Show solution
  1. ω=400\omega = 400 rad/s. Reactances: 100 mH gives XL=40 ΩX_L = 40\ \Omega; 25 mH gives 10 Ω10\ \Omega; 125 mH gives 50 Ω50\ \Omega; 50 μ\muF gives XC=1400×50×10−6=50 ΩX_C = \dfrac{1}{400 \times 50 \times 10^{-6}} = 50\ \Omega.
  2. (P) i=30030sin⁡400t=10sin⁡400ti = \dfrac{300}{30}\sin 400t = 10\sin 400t, in phase: (3).
  3. (Q) Z=302+402=50 ΩZ = \sqrt{30^2 + 40^2} = 50\ \Omega, i0=6i_0 = 6 A, lagging by tan⁡−143=53∘\tan^{-1}\tfrac43 = 53^\circ: i=6sin⁡(400t−53∘)i = 6\sin(400t - 53^\circ), negative at t=0t = 0 (−4.8-4.8), peak at 400t≈0.8π400t \approx 0.8\pi: (5).
  4. (R) XL−XC=10−50=−40X_L - X_C = 10 - 50 = -40, Z=50 ΩZ = 50\ \Omega, i0=6i_0 = 6 A, leading by 53∘53^\circ: i=6sin⁡(400t+53∘)i = 6\sin(400t + 53^\circ), +4.8+4.8 at t=0t = 0, peak at 400t≈0.2π400t \approx 0.2\pi: (2).

    Why: A net capacitive circuit makes the current lead.

  5. (S) XL=XC=50 ΩX_L = X_C = 50\ \Omega: resonance, Z=R=60 ΩZ = R = 60\ \Omega, i=5sin⁡400ti = 5\sin 400t: (1).
AnswerAnswer: (A) P →\rightarrow 3, Q →\rightarrow 5, R →\rightarrow 2, S →\rightarrow 1
Ask about this question
Q16

Physics, Question 16 (4 marks)

Atoms, X-rays and nuclei (dependence on Z) · +4 / −1
List-I shows various functional dependencies of energy (E) on the atomic number (Z). Energies associated with certain phenomena are given in List-II. Choose the option that describes the correct match between the entries in List-I to those in List-II.
List-IList-II
(P) E∝Z2E \propto Z^2(1) energy of characteristic x-rays
(Q) E∝(Z−1)2E \propto (Z-1)^2(2) electrostatic part of the nuclear binding energy for stable nuclei with mass numbers in the range 30 to 170
(R) E∝Z(Z−1)E \propto Z(Z-1)(3) energy of continuous x-rays
(S) EE is practically independent of ZZ(4) average nuclear binding energy per nucleon for stable nuclei with mass number in the range 30 to 170
(5) energy of radiation due to electronic transitions from hydrogen-like atoms
  1. (A)P →\rightarrow 4, Q →\rightarrow 3, R →\rightarrow 1, S →\rightarrow 2
  2. (B)P →\rightarrow 5, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 4
  3. (C)P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 4
  4. (D)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 5

Tests: Recall how atomic, X-ray and nuclear energies scale with atomic number.

Show solution
  1. (P) Hydrogen-like atom: En=−13.6Z2n2E_n = -\dfrac{13.6Z^2}{n^2} eV, so the photon energy ∝Z2\propto Z^2: (5).
  2. (Q) Moseley's law for characteristic X-rays: EKα=34×13.6(Z−1)2E_{K\alpha} = \tfrac34 \times 13.6(Z-1)^2 eV, the other K electron screening one unit of charge: (1).

    Why: Each K-shell electron sees the nucleus screened by the one other K electron.

  3. (R) The Coulomb term of the binding energy counts the repulsion between every pair of the ZZ protons: EC=aCZ(Z−1)A1/3E_C = a_C\dfrac{Z(Z-1)}{A^{1/3}}: (2).
  4. (S) Binding energy per nucleon stays close to 8 to 8.8 MeV for AA from 30 to 170, practically independent of ZZ: (4).
  5. Continuous X-rays (3) are set by the accelerating voltage (cut-off eVeV), so (3) is left over. That gives P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 4.
AnswerAnswer: (C) P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 4
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Chemistry, Question 1 (3 marks)

Nitrogen family (p-block) · +3 / −1
The heating of NH4NO2\mathrm{NH_4NO_2} at 60–70 °C and NH4NO3\mathrm{NH_4NO_3} at 200–250 °C is associated with the formation of nitrogen containing compounds X and Y, respectively. X and Y, respectively, are
  1. (A)N2\mathrm{N_2} and N2O\mathrm{N_2O}
  2. (B)NH3\mathrm{NH_3} and NO2\mathrm{NO_2}
  3. (C)NO\mathrm{NO} and N2O\mathrm{N_2O}
  4. (D)N2\mathrm{N_2} and NH3\mathrm{NH_3}

Tests: Thermal decomposition products of ammonium nitrite and ammonium nitrate.

Show solution
  1. Both salts decompose by an internal redox: the ammonium N (−3) is oxidised and the anion's N is reduced, and the two N atoms meet in the product.

    Why: Ammonium salts of oxidising anions do not give back NH3 on heating.

  2. Ammonium nitrite (N: −3 and +3) meets at 0: NH4NO2→ΔN2+2H2O\mathrm{NH_4NO_2 \xrightarrow{\Delta} N_2 + 2H_2O}. So X = N2\mathrm{N_2} (the lab preparation of nitrogen).
  3. Ammonium nitrate (N: −3 and +5) meets at +1: NH4NO3→ΔN2O+2H2O\mathrm{NH_4NO_3 \xrightarrow{\Delta} N_2O + 2H_2O}. So Y = N2O\mathrm{N_2O} (laughing gas).
AnswerAnswer: (A) N2\mathrm{N_2} and N2O\mathrm{N_2O}
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Coordination compounds (crystal field theory) · +3 / −1
The correct order of the wavelength maxima of the absorption band in the ultraviolet-visible region for the given complexes is
  1. (A)[Co(CN)6]3−<[Co(NH3)6]3+<[Co(NH3)5(H2O)]3+<[Co(NH3)5(Cl)]2+\mathrm{[Co(CN)_6]^{3-} < [Co(NH_3)_6]^{3+} < [Co(NH_3)_5(H_2O)]^{3+} < [Co(NH_3)_5(Cl)]^{2+}}
  2. (B)[Co(NH3)5(Cl)]2+<[Co(NH3)5(H2O)]3+<[Co(NH3)6]3+<[Co(CN)6]3−\mathrm{[Co(NH_3)_5(Cl)]^{2+} < [Co(NH_3)_5(H_2O)]^{3+} < [Co(NH_3)_6]^{3+} < [Co(CN)_6]^{3-}}
  3. (C)[Co(CN)6]3−<[Co(NH3)5(Cl)]2+<[Co(NH3)5(H2O)]3+<[Co(NH3)6]3+\mathrm{[Co(CN)_6]^{3-} < [Co(NH_3)_5(Cl)]^{2+} < [Co(NH_3)_5(H_2O)]^{3+} < [Co(NH_3)_6]^{3+}}
  4. (D)[Co(NH3)6]3+<[Co(CN)6]3−<[Co(NH3)5(Cl)]2+<[Co(NH3)5(H2O)]3+\mathrm{[Co(NH_3)_6]^{3+} < [Co(CN)_6]^{3-} < [Co(NH_3)_5(Cl)]^{2+} < [Co(NH_3)_5(H_2O)]^{3+}}

Tests: Use the spectrochemical series to order the absorption wavelength of complexes.

Show solution
  1. All four are Co(III), d6d^6, octahedral. The absorption is the d–d transition, with energy Δo=hcλmax\Delta_o = \dfrac{hc}{\lambda_{max}}: the larger the splitting, the shorter the wavelength.
  2. Spectrochemical series: CN−>NH3>H2O>Cl−\mathrm{CN^- > NH_3 > H_2O > Cl^-}. So Δo\Delta_o: [Co(CN)6]3−>[Co(NH3)6]3+>[Co(NH3)5(H2O)]3+>[Co(NH3)5Cl]2+\mathrm{[Co(CN)_6]^{3-} > [Co(NH_3)_6]^{3+} > [Co(NH_3)_5(H_2O)]^{3+} > [Co(NH_3)_5Cl]^{2+}}.

    Why: Replacing one NH3 by a weaker-field ligand lowers the average field.

  3. Reverse it for λmax\lambda_{max}: [Co(CN)6]3−<[Co(NH3)6]3+<[Co(NH3)5(H2O)]3+<[Co(NH3)5Cl]2+\mathrm{[Co(CN)_6]^{3-} < [Co(NH_3)_6]^{3+} < [Co(NH_3)_5(H_2O)]^{3+} < [Co(NH_3)_5Cl]^{2+}}, which is option (A).
AnswerAnswer: (A)
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

d-block (potassium permanganate) · +3 / −1
One of the products formed from the reaction of permanganate ion with iodide ion in neutral aqueous medium is
  1. (A)I2\mathrm{I_2}
  2. (B)IO3−\mathrm{IO_3^-}
  3. (C)IO4−\mathrm{IO_4^-}
  4. (D)IO2−\mathrm{IO_2^-}

Tests: Products of permanganate oxidations in neutral versus acidic medium.

Show solution
  1. In neutral or faintly alkaline solution MnO4−\mathrm{MnO_4^-} takes 3 electrons: MnO4−+2H2O+3e−→MnO2+4OH−\mathrm{MnO_4^- + 2H_2O + 3e^- \rightarrow MnO_2 + 4OH^-}.
  2. Under these conditions iodide is oxidised all the way to iodate: I−+6OH−→IO3−+3H2O+6e−\mathrm{I^- + 6OH^- \rightarrow IO_3^- + 3H_2O + 6e^-}.

    Why: In acid, iodide stops at I2; in neutral/alkaline medium it goes to iodate (textbook reaction).

  3. Overall: 2MnO4−+I−+H2O→2MnO2+IO3−+2OH−\mathrm{2MnO_4^- + I^- + H_2O \rightarrow 2MnO_2 + IO_3^- + 2OH^-}. The iodine-containing product is IO3−\mathrm{IO_3^-}.
AnswerAnswer: (B) IO3−\mathrm{IO_3^-}
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Acidity of hydrocarbons (aromaticity) · +3 / −1
Consider the depicted hydrogen (H) in the hydrocarbons given below. The most acidic hydrogen (H) is (Each option is a drawn structure; the marked H is given in words.)
  1. (A)5-Methylidenecyclopenta-1,3-diene (fulvene) carrying an isopropyl group on ring C-2 (the ring carbon not next to the =CH2\mathrm{=CH_2} carbon); the marked H is the isopropyl C–H.
  2. (B)2-Methyl-5-(propan-2-ylidene)cyclopenta-1,3-diene (6,6-dimethylfulvene with a ring methyl); the marked H is on one methyl of the exocyclic =C(CH3)2\mathrm{=C(CH_3)_2} group.
  3. (C)Fulvene carrying an isopropyl group on ring C-1 (the ring carbon next to the =CH2\mathrm{=CH_2} carbon); the marked H is the isopropyl C–H.
  4. (D)3-Methylidene-5-(propan-2-ylidene)cyclopentene (a ring with one C=C, one ring CH2\mathrm{CH_2} and two exocyclic C=C); the marked H is on one methyl of the =C(CH3)2\mathrm{=C(CH_3)_2} group.

Tests: Judge C–H acidity by whether the conjugate base is an aromatic cyclopentadienyl anion.

Show solution
  1. A C–H is acidic when its conjugate base (the carbanion) is strongly stabilised. The biggest stabilisation available here is aromaticity: the cyclopentadienyl anion (5 ring carbons, 6 π electrons).
  2. (B): removing the methyl H gives −CH2−C(CH3)=C5\mathrm{^-CH_2{-}C(CH_3){=}C_5}(ring). The exocyclic C=C swings into the ring: CH2=C(CH3)−C5−\mathrm{CH_2{=}C(CH_3){-}C_5^-}, and the ring now has two C=C plus a carbanion on all five sp2sp^2 carbons: an aromatic cyclopentadienyl anion.

    Why: This is why the exocyclic alkyl H of fulvenes is unusually acidic.

  3. (D): the same kind of methyl H, but the ring has an sp3sp^3 CH2\mathrm{CH_2}. The charge spreads over an open chain CH2=C(CH3)−C=C−C=CH2\mathrm{CH_2{=}C(CH_3){-}C{=}C{-}C{=}CH_2} and can never be a closed 6π ring: conjugated, not aromatic.
  4. (A) and (C): the H is on an isopropyl carbon attached to a ring C=C. The anion is delocalised into the ring, but the exocyclic =CH2\mathrm{=CH_2} and the new exocyclic carbanion carbon cannot both become single bonds to give a 6π ring (8 π electrons on 7 atoms): again only open-chain (pentadienyl / heptatrienyl) delocalisation.
  5. Only (B) gives an aromatic conjugate base, so its marked H is the most acidic.
AnswerAnswer: (B)
Ask about this question

Chemistry, Section 2: 3 questions, one or more options correct: +4 if all the correct options are chosen; +3, +2 or +1 if only some of the correct options are chosen and no wrong one (three of four, two of three or more, one of two or more); −2 in all other cases; 0 if unanswered

Q5

Chemistry, Question 5 (4 marks)

Chemical bonding (molecular orbital theory) · +4 / −2
Regarding the molecular orbital (MO) energy levels for homonuclear diatomic molecules, the INCORRECT statement(s) is(are)
  1. (A)Bond order of Ne2\mathrm{Ne_2} is zero.
  2. (B)The highest occupied molecular orbital (HOMO) of F2\mathrm{F_2} is σ\sigma-type.
  3. (C)Bond energy of O2+\mathrm{O_2^+} is smaller than the bond energy of O2\mathrm{O_2}.
  4. (D)Bond length of Li2\mathrm{Li_2} is larger than the bond length of B2\mathrm{B_2}.

Tests: Fill MO diagrams of second-period diatomics and read off HOMO, bond order and bond strength.

Show solution
  1. (A) Ne2\mathrm{Ne_2} (16 valence electrons) fills every bonding and antibonding MO: bond order =8−82=0= \dfrac{8 - 8}{2} = 0. The statement is correct, so (A) is not chosen.
  2. (B) F2\mathrm{F_2}: σ2s2 σ2s∗2 σ2pz2 π2p4 π2p∗4\sigma_{2s}^2\,\sigma_{2s}^{*2}\,\sigma_{2p_z}^2\,\pi_{2p}^4\,\pi_{2p}^{*4}. The HOMO is π2p∗\pi^*_{2p}, a π\pi-type orbital. The statement is incorrect: (B) is chosen.
  3. (C) O2\mathrm{O_2} has bond order 2; O2+\mathrm{O_2^+} loses one electron from π∗\pi^*, bond order 2.5. Higher bond order, stronger bond: the bond energy of O2+\mathrm{O_2^+} is larger. The statement is incorrect: (C) is chosen.
  4. (D) Li2\mathrm{Li_2} (bond order 1, large 2s orbitals) has bond length about 267 pm; B2\mathrm{B_2} (bond order 1, smaller atoms) about 159 pm. Li2_2 is longer: the statement is correct, so (D) is not chosen.

    Why: Same bond order, so atomic size decides; Li is much larger than B.

AnswerAnswer: (B), (C)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

f-block (lanthanoids, magnetic properties) · +4 / −2
The pair(s) of diamagnetic ions is(are)
  1. (A)La3+\mathrm{La^{3+}}, Ce4+\mathrm{Ce^{4+}}
  2. (B)Yb2+\mathrm{Yb^{2+}}, Lu3+\mathrm{Lu^{3+}}
  3. (C)La2+\mathrm{La^{2+}}, Ce3+\mathrm{Ce^{3+}}
  4. (D)Yb3+\mathrm{Yb^{3+}}, Lu2+\mathrm{Lu^{2+}}

Tests: Write lanthanoid ion configurations and decide unpaired electrons.

Show solution
  1. Ground states: La [Xe]5d16s2[\mathrm{Xe}]5d^1 6s^2 (57), Ce [Xe]4f15d16s2[\mathrm{Xe}]4f^1 5d^1 6s^2 (58), Yb [Xe]4f146s2[\mathrm{Xe}]4f^{14} 6s^2 (70), Lu [Xe]4f145d16s2[\mathrm{Xe}]4f^{14} 5d^1 6s^2 (71). An ion is diamagnetic only if every electron is paired.
  2. (A) La3+\mathrm{La^{3+}} and Ce4+\mathrm{Ce^{4+}} are both [Xe][\mathrm{Xe}] (4f04f^0): both diamagnetic. Correct.
  3. (B) Yb2+\mathrm{Yb^{2+}} and Lu3+\mathrm{Lu^{3+}} are both [Xe]4f14[\mathrm{Xe}]4f^{14}: both diamagnetic. Correct.
  4. (C) La2+\mathrm{La^{2+}} is 5d15d^1 and Ce3+\mathrm{Ce^{3+}} is 4f14f^1: one unpaired electron each, paramagnetic. Wrong.
  5. (D) Yb3+\mathrm{Yb^{3+}} is 4f134f^{13} and Lu2+\mathrm{Lu^{2+}} is 4f145d14f^{14}5d^1: each has an unpaired electron, paramagnetic. Wrong.
AnswerAnswer: (A), (B)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

Haloalkanes (named reactions) · +4 / −2
For the reaction sequence given below, the correct statement(s) is(are) (The scheme: cyclohexene reacts with HBr to give P. P undergoes Finkelstein reaction to give Q, and P undergoes Swarts reaction to give R.) (In the options, X is any atom other than carbon and hydrogen, and it is different in P, Q and R)
  1. (A)C–X bond length in P, Q and R follows the order Q > R > P.
  2. (B)C–X bond enthalpy in P, Q and R follows the order R > P > Q.
  3. (C)Relative reactivity toward SN2\mathrm{S_N2} reaction in P, Q and R follows the order P > R > Q.
  4. (D)pKa\mathrm{p}K_a value of the conjugate acids of the leaving groups in P, Q and R follows the order R > Q > P.

Tests: Identify the halide-exchange products and compare C–X bond length, strength, SN2 reactivity and leaving-group acidity.

Show solution
  1. P: HBr adds to cyclohexene to give bromocyclohexane, C6H11Br\mathrm{C_6H_{11}Br}. Finkelstein (NaI in dry acetone) swaps Br for I: Q = iodocyclohexane. Swarts (AgF\mathrm{AgF} / Hg2F2\mathrm{Hg_2F_2}) swaps Br for F: R = fluorocyclohexane.
  2. (A) Bond length grows with halogen size: C–I > C–Br > C–F, i.e. Q > P > R, not Q > R > P. False.
  3. (B) Bond enthalpy falls as the bond lengthens: C–F > C–Br > C–I, i.e. R > P > Q. True.
  4. (C) SN2\mathrm{S_N2} rate follows leaving-group ability, I−>Br−>F−\mathrm{I^- > Br^- > F^-}: Q > P > R, not P > R > Q. False.
  5. (D) Conjugate acids: HF (pKa≈3.2\mathrm{p}K_a \approx 3.2), HBr (≈−9\approx -9), HI (≈−10\approx -10). So pKa\mathrm{p}K_a: R > P > Q, not R > Q > P. False.

    Why: The weakest conjugate acid (HF) gives the poorest leaving group.

AnswerAnswer: (B)
Ask about this question

Chemistry, Section 3: 6 questions, numerical value (truncate/round off to two decimal places): +4 if correct, 0 in all other cases

Q8

Chemistry, Question 8 (4 marks)

Electrochemistry (Faraday's laws) · +4
In an electrochemical cell, dichromate ions in aqueous acidic medium are reduced to Cr3+\mathrm{Cr^{3+}}. The current (in amperes) that flows through the cell for 48.25 minutes to produce 1 mole of Cr3+\mathrm{Cr^{3+}} is ______. Use: 1 Faraday =96500 C mol−1= 96500\ \mathrm{C\ mol^{-1}}

Tests: Use electrons per ion and Q = It to find the current for a given amount of product.

Show solution
  1. Half-reaction: Cr2O72−+14H++6e−→2Cr3++7H2O\mathrm{Cr_2O_7^{2-} + 14H^+ + 6e^- \rightarrow 2Cr^{3+} + 7H_2O}. Cr goes from +6 to +3: 3 electrons per Cr3+\mathrm{Cr^{3+}}.
  2. Charge for 1 mol Cr3+\mathrm{Cr^{3+}}: Q=3F=3×96500=289500 CQ = 3F = 3 \times 96500 = 289500\ \mathrm{C}.
  3. Time: t=48.25×60=2895 st = 48.25 \times 60 = 2895\ \mathrm{s}.
  4. I=Qt=2895002895=100 AI = \dfrac{Q}{t} = \dfrac{289500}{2895} = 100\ \mathrm{A}.
AnswerAnswer: 100 (A)
Ask about this question
Q9

Chemistry, Question 9 (4 marks)

Ionic equilibrium (very weak acids) · +4
At 25 °C, the concentration of H+\mathrm{H^+} ions in 1.00×10−31.00 \times 10^{-3} M aqueous solution of a weak monobasic acid having acid dissociation constant (Ka)(K_a) of 4.00×10−114.00 \times 10^{-11} is X×10−7X \times 10^{-7} M. The value of XX is ______. Use: Ionic product of water (Kw)=1.00×10−14(K_w) = 1.00 \times 10^{-14} at 25 °C

Tests: Find [H+] of a very weak acid when water's ionisation is comparable.

Show solution
  1. Check: KaC=4.00×10−11×1.00×10−3=4.00×10−14K_a C = 4.00 \times 10^{-11} \times 1.00 \times 10^{-3} = 4.00 \times 10^{-14}, the same order as KwK_w. Water's own H+\mathrm{H^+} cannot be ignored.

    Why: When KaC is near Kw, both sources of H+ count.

  2. Charge balance: [H+]=[A−]+[OH−]=KaC[H+]+Kw[H+][\mathrm{H^+}] = [\mathrm{A^-}] + [\mathrm{OH^-}] = \dfrac{K_a C}{[\mathrm{H^+}]} + \dfrac{K_w}{[\mathrm{H^+}]}, with [HA]≈C[\mathrm{HA}] \approx C since the acid barely ionises.
  3. So [H+]2=KaC+Kw=4.00×10−14+1.00×10−14=5.00×10−14[\mathrm{H^+}]^2 = K_a C + K_w = 4.00 \times 10^{-14} + 1.00 \times 10^{-14} = 5.00 \times 10^{-14}.
  4. [H+]=5.00×10−14=2.236×10−7 M[\mathrm{H^+}] = \sqrt{5.00 \times 10^{-14}} = 2.236 \times 10^{-7}\ \mathrm{M}, so X=2.24X = 2.24 (2.23 if truncated; the key accepts 2.2 to 2.3).
AnswerAnswer: 2.24
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

States of matter (van der Waals equation) · +4
Molar volume (Vm)(V_m) of a van der Waals gas can be calculated by expressing the van der Waals equation as a cubic equation with VmV_m as the variable. The ratio (in mol dm−3\mathrm{mol\ dm^{-3}}) of the coefficient of Vm2V_m^2 to the coefficient of VmV_m for a gas having van der Waals constants a=6.0 dm6 atm mol−2a = 6.0\ \mathrm{dm^6\ atm\ mol^{-2}} and b=0.060 dm3 mol−1b = 0.060\ \mathrm{dm^3\ mol^{-1}} at 300 K and 300 atm is ______. Use: Universal gas constant (R)=0.082 dm3 atm mol−1 K−1(R) = 0.082\ \mathrm{dm^3\ atm\ mol^{-1}\ K^{-1}}

Tests: Expand the van der Waals equation into a cubic in Vm and read its coefficients.

Show solution
  1. Start from (P+aVm2)(Vm−b)=RT\left(P + \dfrac{a}{V_m^2}\right)(V_m - b) = RT and multiply by Vm2V_m^2: PVm3−(Pb+RT)Vm2+aVm−ab=0PV_m^3 - (Pb + RT)V_m^2 + aV_m - ab = 0.
  2. Coefficient of Vm2V_m^2: −(Pb+RT)-(Pb + RT). Coefficient of VmV_m: aa. Ratio =−Pb+RTa= -\dfrac{Pb + RT}{a} (the same if the cubic is first divided by P).
  3. Pb=300×0.060=18.0Pb = 300 \times 0.060 = 18.0; RT=0.082×300=24.6RT = 0.082 \times 300 = 24.6; sum =42.6 dm3 atm mol−1= 42.6\ \mathrm{dm^3\ atm\ mol^{-1}}.
  4. Ratio =−42.66.0=−7.10 mol dm−3= -\dfrac{42.6}{6.0} = -7.10\ \mathrm{mol\ dm^{-3}}.
AnswerAnswer: −7.10
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Thermodynamics (pressure-volume work) · +4
Considering ideal gas behavior, the expansion work done (in kJ) when 144 g of water is electrolyzed completely under constant pressure at 300 K is ______. Use: Universal gas constant (R)=8.3 J K−1 mol−1(R) = 8.3\ \mathrm{J\ K^{-1}\ mol^{-1}}; Atomic mass (in amu): H = 1, O = 16

Tests: Find PV work from the change in moles of gas at constant pressure.

Show solution
  1. Moles of water: 14418=8 mol\dfrac{144}{18} = 8\ \mathrm{mol}. Electrolysis: 2H2O(l)→2H2(g)+O2(g)\mathrm{2H_2O(l) \rightarrow 2H_2(g) + O_2(g)} gives 8 mol H2\mathrm{H_2} and 4 mol O2\mathrm{O_2}.
  2. Gas formed: Δng=8+4=12 mol\Delta n_g = 8 + 4 = 12\ \mathrm{mol}. The volume of the liquid water consumed is negligible next to the gases.
  3. At constant pressure, w=−PΔV=−ΔngRT=−12×8.3×300=−29880 J=−29.88 kJw = -P\Delta V = -\Delta n_g RT = -12 \times 8.3 \times 300 = -29880\ \mathrm{J} = -29.88\ \mathrm{kJ}.
  4. Sign: with the IUPAC convention (work done on the system positive) the system does expansion work, so w=−29.88w = -29.88 kJ. Read as "work done by the system" the same quantity is +29.88+29.88 kJ, so the key accepts either sign.

    Why: The question says "expansion work done" without saying by or on the system.

AnswerAnswer: −29.88 kJ (the key also accepts +29.88)
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Polymers and amines (Dumas method) · +4
The monomer (X) involved in the synthesis of Nylon 6,6 gives positive carbylamine test. If 10 moles of X are analyzed using Dumas method, the amount (in grams) of nitrogen gas evolved is ______. Use: Atomic mass of N (in amu) = 14

Tests: Identify the amine monomer of Nylon 6,6 and apply Dumas nitrogen estimation.

Show solution
  1. Nylon 6,6 is made from adipic acid HOOC(CH2)4COOH\mathrm{HOOC(CH_2)_4COOH} and hexamethylenediamine H2N(CH2)6NH2\mathrm{H_2N(CH_2)_6NH_2}. Only a primary amine gives the carbylamine (isocyanide) test, so X is hexamethylenediamine, C6H16N2\mathrm{C_6H_{16}N_2}.
  2. Dumas method converts all the nitrogen of the compound into N2\mathrm{N_2} gas. Each molecule of X has 2 N atoms, so 1 mol X gives 1 mol N2\mathrm{N_2}.
  3. 10 mol X gives 10 mol N2\mathrm{N_2} =10×28=280 g= 10 \times 28 = 280\ \mathrm{g}.
AnswerAnswer: 280 g
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Aldehydes, alcohols and ethers (reaction sequence) · +4
The reaction sequence given below is carried out with 16 moles of X. The yield of the major product in each step is given below the product in parentheses. The amount (in grams) of S produced is ______. (The scheme: X is 2-(2-bromophenyl)-1,3-dioxolane, the ethylene acetal of 2-bromobenzaldehyde. X with (i) Na, dry ether, (ii) H3O+\mathrm{H_3O^+} gives P (molar mass 210, 100 %). P with (i) NaOH, Δ\Delta, (ii) H3O+\mathrm{H_3O^+} gives Q (50 %). Q with (i) NaOH, CaO, (ii) Δ\Delta gives R (50 %). R with PBr3\mathrm{PBr_3}, (C2H5)2O\mathrm{(C_2H_5)_2O} gives T (50 %). T with R and NaH, (C2H5)2O\mathrm{(C_2H_5)_2O} gives S (50 %).) Use: Atomic mass (in amu): H = 1, C = 12, O = 16, Br = 80

Tests: Follow a multistep sequence (Fittig, Cannizzaro, decarboxylation, Williamson) with yields and stoichiometry.

Show solution
  1. X → P: Na in dry ether couples two aryl bromides (Fittig reaction); the acetals survive, and H3O+\mathrm{H_3O^+} then frees the aldehydes. P = biphenyl-2,2'-dicarbaldehyde, C14H10O2\mathrm{C_{14}H_{10}O_2} = 168 + 10 + 32 = 210, matching the given molar mass. Two X make one P: 16 mol X → 8 mol P (100 %).
  2. P → Q: hot NaOH on a dialdehyde with no α-H is an intramolecular Cannizzaro reaction: one CHO becomes COO−\mathrm{COO^-}, the other CH2OH\mathrm{CH_2OH}. After acid, Q = 2'-(hydroxymethyl)biphenyl-2-carboxylic acid. 50 %: 4 mol.
  3. Q → R: soda lime (NaOH/CaO) with heat decarboxylates the acid. R = (biphenyl-2-yl)methanol, C6H5C6H4CH2OH\mathrm{C_6H_5C_6H_4CH_2OH}. 50 %: 2 mol.
  4. R → T: PBr3\mathrm{PBr_3} turns the alcohol into 2-(bromomethyl)biphenyl, C6H5C6H4CH2Br\mathrm{C_6H_5C_6H_4CH_2Br}. 50 %: 1 mol.
  5. T → S: NaH makes the alkoxide of R, which displaces Br from T (Williamson synthesis). S = bis(biphenyl-2-ylmethyl) ether, (C6H5C6H4CH2)2O\mathrm{(C_6H_5C_6H_4CH_2)_2O}, C26H22O\mathrm{C_{26}H_{22}O} = 312 + 22 + 16 = 350. The 50 % yield is on T (the R for this step is taken as supplied): 0.5 mol.

    Why: The key's 175 g follows the yields straight down the chain from T.

  6. Mass of S =0.5×350=175 g= 0.5 \times 350 = 175\ \mathrm{g}.
AnswerAnswer: 175 g
Ask about this question

Chemistry, Section 4: 3 matching List-I / List-II sets, only one option correct: +4 if correct, −1 if wrong, 0 if unanswered

Q14

Chemistry, Question 14 (4 marks)

Qualitative analysis (group reagents) · +4 / −1
The correct match of the group reagents in List-I for precipitating the metal ion given in List-II from solutions, is
List-IList-II
(P) Passing H2S\mathrm{H_2S} in the presence of NH4OH\mathrm{NH_4OH}(1) Cu2+\mathrm{Cu^{2+}}
(Q) (NH4)2CO3\mathrm{(NH_4)_2CO_3} in the presence of NH4OH\mathrm{NH_4OH}(2) Al3+\mathrm{Al^{3+}}
(R) NH4OH\mathrm{NH_4OH} in the presence of NH4Cl\mathrm{NH_4Cl}(3) Mn2+\mathrm{Mn^{2+}}
(S) Passing H2S\mathrm{H_2S} in the presence of dilute HCl(4) Ba2+\mathrm{Ba^{2+}}
(5) Mg2+\mathrm{Mg^{2+}}
  1. (A)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 1
  2. (B)P →\rightarrow 4; Q →\rightarrow 2; R →\rightarrow 3; S →\rightarrow 1
  3. (C)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 1; S →\rightarrow 5
  4. (D)P →\rightarrow 5; Q →\rightarrow 3; R →\rightarrow 2; S →\rightarrow 4

Tests: Match cation group reagents to the ions they precipitate.

Show solution
  1. (S) H2S\mathrm{H_2S} in dilute HCl is the group II reagent: low [S2−]\mathrm{[S^{2-}]} precipitates only sulfides of very low KspK_{sp}, such as CuS. S → 1.

    Why: Common-ion effect of HCl suppresses H2S ionisation.

  2. (R) NH4OH\mathrm{NH_4OH} with NH4Cl\mathrm{NH_4Cl} is the group III reagent: it precipitates Al(OH)3\mathrm{Al(OH)_3} while NH4Cl\mathrm{NH_4Cl} keeps [OH−]\mathrm{[OH^-]} too low for Mg(OH)2\mathrm{Mg(OH)_2} or Mn(OH)2\mathrm{Mn(OH)_2}. R → 2.
  3. (P) H2S\mathrm{H_2S} in ammoniacal solution is the group IV reagent: high [S2−]\mathrm{[S^{2-}]} precipitates MnS (buff/pink). P → 3.
  4. (Q) (NH4)2CO3\mathrm{(NH_4)_2CO_3} with NH4OH\mathrm{NH_4OH} is the group V reagent: it precipitates BaCO3\mathrm{BaCO_3}. Q → 4. Mg2+\mathrm{Mg^{2+}} (group VI) is left unmatched.
  5. P → 3, Q → 4, R → 2, S → 1 is option (A).
AnswerAnswer: (A) P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 1
Ask about this question
Q15

Chemistry, Question 15 (4 marks)

Named reactions (aromatic compounds) · +4 / −1
The major products obtained from the reactions in List-II are the reactants for the named reactions mentioned in List-I. Match each entry in List-I with the appropriate entry in List-II and choose the correct option.
List-IList-II
(P) Stephen reaction(1) Toluene treated with (i) CrO2Cl2/CS2\mathrm{CrO_2Cl_2/CS_2}, (ii) H3O+\mathrm{H_3O^+}
(Q) Sandmeyer reaction(2) Benzoic acid treated with (i) PCl5\mathrm{PCl_5}, (ii) NH3\mathrm{NH_3}, (iii) P4O10\mathrm{P_4O_{10}}, Δ\Delta
(R) Hoffmann bromamide degradation reaction(3) Nitrobenzene treated with (i) Fe, HCl, (ii) HCl, NaNO2\mathrm{NaNO_2} (273–278 K), H2O\mathrm{H_2O}
(S) Cannizzaro reaction(4) Toluene treated with (i) Cl2/hν\mathrm{Cl_2}/h\nu, H2O\mathrm{H_2O}, (ii) Tollen's reagent, (iii) SO2Cl2\mathrm{SO_2Cl_2}, (iv) NH3\mathrm{NH_3}
(5) Aniline treated with (i) (CH3CO)2O\mathrm{(CH_3CO)_2O}, pyridine, (ii) HNO3\mathrm{HNO_3}, H2SO4\mathrm{H_2SO_4}, 288 K, (iii) aq. NaOH
  1. (A)P →\rightarrow 2; Q →\rightarrow 4; R →\rightarrow 1; S →\rightarrow 3
  2. (B)P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 4; S →\rightarrow 1
  3. (C)P →\rightarrow 5; Q →\rightarrow 3; R →\rightarrow 4; S →\rightarrow 2
  4. (D)P →\rightarrow 5; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 1

Tests: Recognise the reactant each named reaction needs and trace the reagent sequences that make it.

Show solution
  1. (1) Étard reaction: toluene → benzaldehyde C6H5CHO\mathrm{C_6H_5CHO}. An aldehyde with no α-H is the reactant for Cannizzaro: S → 1.
  2. (2) Benzoic acid → benzoyl chloride → benzamide → (dehydration by P4O10\mathrm{P_4O_{10}}) benzonitrile C6H5CN\mathrm{C_6H_5CN}. Nitriles are reduced to aldehydes by SnCl2/HCl\mathrm{SnCl_2/HCl} in the Stephen reaction: P → 2.
  3. (3) Nitrobenzene → aniline (Fe/HCl) → benzenediazonium chloride (cold NaNO2\mathrm{NaNO_2}/HCl). Diazonium salts are the reactants for Sandmeyer (CuCl, CuBr, CuCN): Q → 3.
  4. (4) Side-chain chlorination and hydrolysis give benzaldehyde (via C6H5CHCl2\mathrm{C_6H_5CHCl_2}); Tollens' oxidises it to benzoic acid; SO2Cl2\mathrm{SO_2Cl_2} gives benzoyl chloride; NH3\mathrm{NH_3} gives benzamide C6H5CONH2\mathrm{C_6H_5CONH_2}, the reactant for Hoffmann bromamide degradation: R → 4.
  5. (5) gives p-nitroaniline (protect, nitrate, deprotect), not needed for any named reaction here. P → 2, Q → 3, R → 4, S → 1 is option (B).
AnswerAnswer: (B) P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 4; S →\rightarrow 1
Ask about this question
Q16

Chemistry, Question 16 (4 marks)

Tests for functional groups (amines, phenols, amino acids) · +4 / −1
Match the compounds in List-I with the appropriate observations in List-II and choose the correct option. (List-I structures are given in words.)
List-IList-II
(P) HO−C6H4−CH(NH2)−CO−NH−CH2−COOCH3\mathrm{HO{-}C_6H_4{-}CH(NH_2){-}CO{-}NH{-}CH_2{-}COOCH_3} (para-OH): the methyl ester of the dipeptide (4-hydroxyphenyl)glycyl-glycine(1) Reaction with phenyl diazonium salt gives yellow dye.
(Q) CH3CO−NH−CH(C6H5)−CO−NH−CH(CH(CH3)2)−COOCH3\mathrm{CH_3CO{-}NH{-}CH(C_6H_5){-}CO{-}NH{-}CH(CH(CH_3)_2){-}COOCH_3}: N-acetyl-phenylglycyl-valine methyl ester(2) Reaction with ninhydrin gives purple color and it also reacts with FeCl3\mathrm{FeCl_3} to give violet color.
(R) Anilinium chloride, C6H5NH3+Cl−\mathrm{C_6H_5NH_3^+Cl^-}(3) Reaction with glucose will give corresponding hydrazone.
(S) (2,4,6-Trimethylphenyl)hydrazine (mesitylhydrazine), (CH3)3C6H2NHNH2\mathrm{(CH_3)_3C_6H_2NHNH_2}(4) Lassiagne extract of the compound treated with dilute HCl followed by addition of aqueous FeCl3\mathrm{FeCl_3} gives blood red color.
(5) After complete hydrolysis, it will give ninhydrin test and it DOES NOT give positive phthalein dye test.
  1. (A)P →\rightarrow 1; Q →\rightarrow 5; R →\rightarrow 4; S →\rightarrow 2
  2. (B)P →\rightarrow 2; Q →\rightarrow 5; R →\rightarrow 1; S →\rightarrow 3
  3. (C)P →\rightarrow 5; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 4
  4. (D)P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 5; S →\rightarrow 3

Tests: Match structures to classic tests: ninhydrin, FeCl3, azo coupling, hydrazone formation, Lassaigne's test.

Show solution
  1. (P) has a free α-NH2\mathrm{NH_2} (ninhydrin gives Ruhemann's purple) and a phenolic OH (neutral FeCl3\mathrm{FeCl_3} gives a violet complex). P → 2.
  2. (Q) has no free NH2 (it is acetylated) and no phenol, so it gives neither test as it is. Complete hydrolysis frees the amino acids phenylglycine and valine, which give ninhydrin; with no phenol it gives no phthalein dye test. Q → 5.
  3. (R) Anilinium chloride releases aniline, which couples with benzenediazonium chloride to give p-aminobenzene azo dye (4-aminoazobenzene, yellow). R → 1.

    Why: Aniline couples at the para position in weakly acidic solution.

  4. (S) An arylhydrazine ArNHNH2\mathrm{ArNHNH_2} condenses with the aldehyde group of glucose to give the glucose arylhydrazone. S → 3.
  5. Observation (4) needs both N and S in the compound (Lassaigne extract gives SCN−\mathrm{SCN^-}, which turns Fe3+\mathrm{Fe^{3+}} blood red); none of P–S has sulfur, so (4) is unused. P → 2, Q → 5, R → 1, S → 3 is option (B).
AnswerAnswer: (B) P →\rightarrow 2; Q →\rightarrow 5; R →\rightarrow 1; S →\rightarrow 3
Ask about this question

Questions are quoted from JEE (Advanced) 2025 Paper 1 (English); figures are described in words. Every final answer is checked against the official final answer key. Where the official key accepts more than one answer, or gave every candidate full marks, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.