AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2025 Paper 2: Question Paper with Solutions and Answer Key

All 48 questions of JEE Advanced 2025 Paper 2 solved step by step: Mathematics, Physics and Chemistry, with the official answer key and the marking of each section. Every final answer is checked against the official final answer key.

JEE (Advanced) 2025 Paper 2: 48 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2025: Paper 1.

Mathematics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Mathematics, Question 1 (3 marks)

Limits and differentiability · +3 / −1
Let x0x_0 be the real number such that ex0+x0=0e^{x_0} + x_0 = 0. For a given real number α\alpha, define g(x)=3xex+3x−αex−αx3(ex+1)g(x) = \dfrac{3xe^x + 3x - \alpha e^x - \alpha x}{3(e^x + 1)} for all real numbers xx. Then which one of the following statements is TRUE?
  1. (A)For α=2\alpha = 2, lim⁡x→x0∣g(x)+ex0x−x0∣=0\displaystyle\lim_{x \to x_0} \left| \dfrac{g(x) + e^{x_0}}{x - x_0} \right| = 0
  2. (B)For α=2\alpha = 2, lim⁡x→x0∣g(x)+ex0x−x0∣=1\displaystyle\lim_{x \to x_0} \left| \dfrac{g(x) + e^{x_0}}{x - x_0} \right| = 1
  3. (C)For α=3\alpha = 3, lim⁡x→x0∣g(x)+ex0x−x0∣=0\displaystyle\lim_{x \to x_0} \left| \dfrac{g(x) + e^{x_0}}{x - x_0} \right| = 0
  4. (D)For α=3\alpha = 3, lim⁡x→x0∣g(x)+ex0x−x0∣=23\displaystyle\lim_{x \to x_0} \left| \dfrac{g(x) + e^{x_0}}{x - x_0} \right| = \dfrac{2}{3}

Tests: Recognise a limit as a derivative and differentiate a quotient at a special point.

Show solution
  1. Split the numerator: 3xex+3x−αex−αx=3x(ex+1)−α(ex+x)3xe^x + 3x - \alpha e^x - \alpha x = 3x(e^x + 1) - \alpha(e^x + x), so g(x)=x−α3⋅ex+xex+1g(x) = x - \dfrac{\alpha}{3} \cdot \dfrac{e^x + x}{e^x + 1}.

    Why: The factor ex+xe^x + x is exactly the expression that vanishes at x0x_0.

  2. At x0x_0: ex0+x0=0e^{x_0} + x_0 = 0, so g(x0)=x0=−ex0g(x_0) = x_0 = -e^{x_0}, i.e. g(x0)+ex0=0g(x_0) + e^{x_0} = 0.
  3. Hence g(x)+ex0x−x0=g(x)−g(x0)x−x0→g′(x0)\dfrac{g(x) + e^{x_0}}{x - x_0} = \dfrac{g(x) - g(x_0)}{x - x_0} \to g'(x_0).

    Why: A 0/0 form that is the definition of the derivative.

  4. Let h(x)=ex+xex+1h(x) = \dfrac{e^x + x}{e^x + 1}. Then h′(x)=(ex+1)2−(ex+x)ex(ex+1)2h'(x) = \dfrac{(e^x + 1)^2 - (e^x + x)e^x}{(e^x + 1)^2}, and at x0x_0 the second term is 0, so h′(x0)=1h'(x_0) = 1.
  5. So g′(x0)=1−α3g'(x_0) = 1 - \dfrac{\alpha}{3} and the limit is ∣1−α3∣\left|1 - \dfrac{\alpha}{3}\right|.
  6. α=2\alpha = 2: limit =13= \dfrac{1}{3}, so (A) and (B) are false. α=3\alpha = 3: limit =0= 0, so (C) is true and (D) is false.
AnswerAnswer: (C) for α=3\alpha = 3 the limit is 0
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Area under curves · +3 / −1
Let R\mathbb{R} denote the set of all real numbers. Then the area of the region {(x,y)∈R×R:x>0, y>1x, 5x−4y−1>0, 4x+4y−17<0}\left\{(x, y) \in \mathbb{R} \times \mathbb{R} : x > 0,\ y > \dfrac{1}{x},\ 5x - 4y - 1 > 0,\ 4x + 4y - 17 < 0\right\} is
  1. (A)1716−log⁡e4\dfrac{17}{16} - \log_e 4
  2. (B)338−log⁡e4\dfrac{33}{8} - \log_e 4
  3. (C)578−log⁡e4\dfrac{57}{8} - \log_e 4
  4. (D)172−log⁡e4\dfrac{17}{2} - \log_e 4

Tests: Find the area of a region bounded by a hyperbola and two lines by splitting at the corner.

Show solution
  1. The region lies above y=1xy = \dfrac{1}{x} and below both lines y=5x−14y = \dfrac{5x - 1}{4} and y=17−4x4y = \dfrac{17 - 4x}{4}.
  2. Corners: 1x=5x−14\dfrac{1}{x} = \dfrac{5x - 1}{4} gives 5x2−x−4=05x^2 - x - 4 = 0, x=1x = 1 (with x>0x > 0). 1x=17−4x4\dfrac{1}{x} = \dfrac{17 - 4x}{4} gives 4x2−17x+4=04x^2 - 17x + 4 = 0, x=4x = 4 or 14\dfrac{1}{4}. The two lines meet at x=2x = 2, y=94y = \dfrac{9}{4}.
  3. For 1<x<21 < x < 2 the lower line is y=5x−14y = \dfrac{5x - 1}{4}; for 2<x<42 < x < 4 it is y=17−4x4y = \dfrac{17 - 4x}{4}. At x=14x = \dfrac{1}{4} the line 5x−4y−1>05x - 4y - 1 > 0 needs y<116y < \dfrac{1}{16}, below the curve, so the region is only 1<x<41 < x < 4.

    Why: The upper boundary is the smaller of the two lines.

  4. ∫125x−14 dx=14[5x22−x]12=138\displaystyle\int_1^2 \dfrac{5x - 1}{4}\,dx = \dfrac{1}{4}\left[\dfrac{5x^2}{2} - x\right]_1^2 = \dfrac{13}{8} and ∫2417−4x4 dx=14[17x−2x2]24=52\displaystyle\int_2^4 \dfrac{17 - 4x}{4}\,dx = \dfrac{1}{4}\left[17x - 2x^2\right]_2^4 = \dfrac{5}{2}.
  5. Subtract the area under the curve: ∫14dxx=log⁡e4\displaystyle\int_1^4 \dfrac{dx}{x} = \log_e 4.
  6. Area =138+208−log⁡e4=338−log⁡e4= \dfrac{13}{8} + \dfrac{20}{8} - \log_e 4 = \dfrac{33}{8} - \log_e 4.
AnswerAnswer: (B) 338−log⁡e4\dfrac{33}{8} - \log_e 4
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Inverse trigonometric functions · +3 / −1
The total number of real solutions of the equation θ=tan⁡−1(2tan⁡θ)−12sin⁡−1(6tan⁡θ9+tan⁡2θ)\theta = \tan^{-1}(2\tan\theta) - \dfrac{1}{2}\sin^{-1}\left(\dfrac{6\tan\theta}{9 + \tan^2\theta}\right) is (Here, the inverse trigonometric functions sin⁡−1x\sin^{-1}x and tan⁡−1x\tan^{-1}x assume values in [−π2,π2]\left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right] and (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right), respectively.)
  1. (A)1
  2. (B)2
  3. (C)3
  4. (D)5

Tests: Use sin⁡−12u1+u2=2tan⁡−1u\sin^{-1}\dfrac{2u}{1 + u^2} = 2\tan^{-1}u only where it holds, and bound θ\theta by the range of the right side.

Show solution
  1. Range: tan⁡−1(2tan⁡θ)∈(−π2,π2)\tan^{-1}(2\tan\theta) \in \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right) and 12sin⁡−1(⋅)∈[−π4,π4]\dfrac{1}{2}\sin^{-1}(\cdot) \in \left[-\dfrac{\pi}{4}, \dfrac{\pi}{4}\right], so any solution has ∣θ∣<3π4|\theta| < \dfrac{3\pi}{4}, θ≠±π2\theta \ne \pm\dfrac{\pi}{2}.
  2. Put t=tan⁡θt = \tan\theta, u=t3u = \dfrac{t}{3}: 6t9+t2=2u1+u2\dfrac{6t}{9 + t^2} = \dfrac{2u}{1 + u^2}, so 12sin⁡−1(⋅)=tan⁡−1t3\dfrac{1}{2}\sin^{-1}(\cdot) = \tan^{-1}\dfrac{t}{3} when ∣t∣≤3|t| \le 3, π2−tan⁡−1t3\dfrac{\pi}{2} - \tan^{-1}\dfrac{t}{3} when t>3t > 3, and −π2−tan⁡−1t3-\dfrac{\pi}{2} - \tan^{-1}\dfrac{t}{3} when t<−3t < -3.
  3. Case ∣θ∣<π2|\theta| < \dfrac{\pi}{2}, ∣t∣≤3|t| \le 3: θ=tan⁡−1t\theta = \tan^{-1}t, so tan⁡−1t+tan⁡−1t3=tan⁡−12t\tan^{-1}t + \tan^{-1}\dfrac{t}{3} = \tan^{-1}2t. Either t=0t = 0, or 4t/31−t2/3=2t\dfrac{4t/3}{1 - t^2/3} = 2t, giving t2=1t^2 = 1. So θ=0,±π4\theta = 0, \pm\dfrac{\pi}{4} (check: π4+tan⁡−113=tan⁡−12\dfrac{\pi}{4} + \tan^{-1}\dfrac{1}{3} = \tan^{-1}2).
  4. Case ∣θ∣<π2|\theta| < \dfrac{\pi}{2}, t>3t > 3: the equation becomes tan⁡−1t−tan⁡−1t3=−tan⁡−112t\tan^{-1}t - \tan^{-1}\dfrac{t}{3} = -\tan^{-1}\dfrac{1}{2t}. The left side is positive and the right side negative: no solution. t<−3t < -3 is the mirror case: none.
  5. Case π2<θ<3π4\dfrac{\pi}{2} < \theta < \dfrac{3\pi}{4}: here t<−1t < -1 and the right side is negative (for −3≤t<−1-3 \le t < -1 it is tan⁡−12t−tan⁡−1t3≤−π4\tan^{-1}2t - \tan^{-1}\dfrac{t}{3} \le -\dfrac{\pi}{4}; for t<−3t < -3 it is tan⁡−12t+π2+tan⁡−1t3<0\tan^{-1}2t + \dfrac{\pi}{2} + \tan^{-1}\dfrac{t}{3} < 0), but θ>0\theta > 0: none. The case −3π4<θ<−π2-\dfrac{3\pi}{4} < \theta < -\dfrac{\pi}{2} is the mirror image: none.
  6. Solutions: θ=−π4,0,π4\theta = -\dfrac{\pi}{4}, 0, \dfrac{\pi}{4}, three in all.
AnswerAnswer: (C) 3
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Hyperbola · +3 / −1
Let SS denote the locus of the point of intersection of the pair of lines 4x−3y=12α4x - 3y = 12\alpha, 4αx+3αy=124\alpha x + 3\alpha y = 12, where α\alpha varies over the set of non-zero real numbers. Let TT be the tangent to SS passing through the points (p,0)(p, 0) and (0,q)(0, q), q>0q > 0, and parallel to the line 4x−32y=04x - \dfrac{3}{\sqrt{2}}y = 0. Then the value of pqpq is
  1. (A)−62-6\sqrt{2}
  2. (B)−32-3\sqrt{2}
  3. (C)−92-9\sqrt{2}
  4. (D)−122-12\sqrt{2}

Tests: Find a locus by eliminating a parameter, then use the condition for a line of given slope to touch a hyperbola.

Show solution
  1. Divide the second line by α\alpha: 4x+3y=12α4x + 3y = \dfrac{12}{\alpha}. Adding and subtracting with 4x−3y=12α4x - 3y = 12\alpha: x=32(α+1α)x = \dfrac{3}{2}\left(\alpha + \dfrac{1}{\alpha}\right), y=2(1α−α)y = 2\left(\dfrac{1}{\alpha} - \alpha\right).
  2. Eliminate α\alpha: (2x3)2−(y2)2=(α+1α)2−(1α−α)2=4\left(\dfrac{2x}{3}\right)^2 - \left(\dfrac{y}{2}\right)^2 = \left(\alpha + \dfrac{1}{\alpha}\right)^2 - \left(\dfrac{1}{\alpha} - \alpha\right)^2 = 4, so S:x29−y216=1S: \dfrac{x^2}{9} - \dfrac{y^2}{16} = 1.

    Why: Equivalently, multiply the two line equations: (4x − 3y)(4x + 3y) = 144.

  3. The tangent is parallel to 4x−32y=04x - \dfrac{3}{\sqrt{2}}y = 0, so its slope is m=423m = \dfrac{4\sqrt{2}}{3}.
  4. Tangent of slope mm to x2a2−y2b2=1\dfrac{x^2}{a^2} - \dfrac{y^2}{b^2} = 1: y=mx±a2m2−b2=mx±9⋅329−16=mx±4y = mx \pm \sqrt{a^2m^2 - b^2} = mx \pm \sqrt{9 \cdot \dfrac{32}{9} - 16} = mx \pm 4.
  5. q>0q > 0 picks y=423x+4y = \dfrac{4\sqrt{2}}{3}x + 4: q=4q = 4, and y=0y = 0 gives p=−32p = -\dfrac{3}{\sqrt{2}}.
  6. pq=−122=−62pq = -\dfrac{12}{\sqrt{2}} = -6\sqrt{2}.
AnswerAnswer: (A) −62-6\sqrt{2}
Ask about this question

Mathematics, Section 2: 4 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −2 in all other cases

Q5

Mathematics, Question 5 (4 marks)

Matrices and eigenvalues · +4 / −2
Let I=(1001)I = \begin{pmatrix} 1 & 0 \\ 0 & 1 \end{pmatrix} and P=(2003)P = \begin{pmatrix} 2 & 0 \\ 0 & 3 \end{pmatrix}. Let Q=(xyz4)Q = \begin{pmatrix} x & y \\ z & 4 \end{pmatrix} for some non-zero real numbers xx, yy, and zz, for which there is a 2×22 \times 2 matrix RR with all entries being non-zero real numbers, such that QR=RPQR = RP. Then which of the following statements is (are) TRUE?
  1. (A)The determinant of Q−2IQ - 2I is zero
  2. (B)The determinant of Q−6IQ - 6I is 12
  3. (C)The determinant of Q−3IQ - 3I is 15
  4. (D)yz=2yz = 2

Tests: Read QR = RP column by column as an eigenvalue statement and use trace and determinant.

Show solution
  1. Let R=(abcd)R = \begin{pmatrix} a & b \\ c & d \end{pmatrix}. Then RP=(2a3b2c3d)RP = \begin{pmatrix} 2a & 3b \\ 2c & 3d \end{pmatrix}, so QR=RPQR = RP says Q(ac)=2(ac)Q\begin{pmatrix} a \\ c \end{pmatrix} = 2\begin{pmatrix} a \\ c \end{pmatrix} and Q(bd)=3(bd)Q\begin{pmatrix} b \\ d \end{pmatrix} = 3\begin{pmatrix} b \\ d \end{pmatrix}.

    Why: Compare the matrices column by column.

  2. Both columns are non-zero, so 2 and 3 are eigenvalues of QQ: trace x+4=5x + 4 = 5 and determinant 4x−yz=64x - yz = 6.
  3. So x=1x = 1 and yz=−2yz = -2: Q=(1yz4)Q = \begin{pmatrix} 1 & y \\ z & 4 \end{pmatrix}. (Eigenvectors such as (y,1)(y, 1) for 2 and (y,2)(y, 2) for 3 have non-zero entries, so such an RR exists.)
  4. (A) det⁡(Q−2I)=(−1)(2)−yz=−2+2=0\det(Q - 2I) = (-1)(2) - yz = -2 + 2 = 0: TRUE.
  5. (B) det⁡(Q−6I)=(−5)(−2)−yz=10+2=12\det(Q - 6I) = (-5)(-2) - yz = 10 + 2 = 12: TRUE.
  6. (C) det⁡(Q−3I)=(−2)(1)−yz=−2+2=0≠15\det(Q - 3I) = (-2)(1) - yz = -2 + 2 = 0 \ne 15: FALSE. (D) yz=−2yz = -2, not 2: FALSE.
AnswerAnswer: (A), (B)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Parabola and area · +4 / −2
Let SS denote the locus of the mid-points of those chords of the parabola y2=xy^2 = x, such that the area of the region enclosed between the parabola and the chord is 43\dfrac{4}{3}. Let R\mathcal{R} denote the region lying in the first quadrant, enclosed by the parabola y2=xy^2 = x, the curve SS, and the lines x=1x = 1 and x=4x = 4. Then which of the following statements is (are) TRUE?
  1. (A)(4,3)∈S(4, \sqrt{3}) \in S
  2. (B)(5,2)∈S(5, \sqrt{2}) \in S
  3. (C)Area of R\mathcal{R} is 143−23\dfrac{14}{3} - 2\sqrt{3}
  4. (D)Area of R\mathcal{R} is 143−3\dfrac{14}{3} - \sqrt{3}

Tests: Use the parametric chord of a parabola to find a locus of mid-points, then an area between two curves.

Show solution
  1. Take chord ends (t12,t1)(t_1^2, t_1) and (t22,t2)(t_2^2, t_2). The chord is x=(t1+t2)y−t1t2x = (t_1 + t_2)y - t_1t_2.
  2. Area between chord and parabola =∫t1t2[(t1+t2)y−t1t2−y2]dy=∣t2−t1∣36= \displaystyle\int_{t_1}^{t_2} \left[(t_1 + t_2)y - t_1t_2 - y^2\right] dy = \dfrac{|t_2 - t_1|^3}{6}. Setting this to 43\dfrac{4}{3}: ∣t2−t1∣=2|t_2 - t_1| = 2.

    Why: The integrand is (y−t1)(t2−y)(y - t_1)(t_2 - y).

  3. Mid-point (h,k)(h, k): k=t1+t22k = \dfrac{t_1 + t_2}{2}, h=t12+t222=(t1+t2)2+(t1−t2)24=k2+1h = \dfrac{t_1^2 + t_2^2}{2} = \dfrac{(t_1 + t_2)^2 + (t_1 - t_2)^2}{4} = k^2 + 1. So S:x=y2+1S: x = y^2 + 1.
  4. (A) 3+1=43 + 1 = 4: TRUE. (B) 2+1=3≠52 + 1 = 3 \ne 5: FALSE.
  5. In the first quadrant the curves are y=xy = \sqrt{x} (parabola, above) and y=x−1y = \sqrt{x - 1} (SS, below), between x=1x = 1 and x=4x = 4.
  6. Area =∫14(x−x−1)dx=23(8−1)−23(33)=143−23= \displaystyle\int_1^4 \left(\sqrt{x} - \sqrt{x - 1}\right) dx = \dfrac{2}{3}(8 - 1) - \dfrac{2}{3}(3\sqrt{3}) = \dfrac{14}{3} - 2\sqrt{3}. (C) TRUE, (D) FALSE.
AnswerAnswer: (A), (C)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Ellipse · +4 / −2
Let P(x1,y1)P(x_1, y_1) and Q(x2,y2)Q(x_2, y_2) be two distinct points on the ellipse x29+y24=1\dfrac{x^2}{9} + \dfrac{y^2}{4} = 1 such that y1>0y_1 > 0, and y2>0y_2 > 0. Let CC denote the circle x2+y2=9x^2 + y^2 = 9, and MM be the point (3,0)(3, 0). Suppose the line x=x1x = x_1 intersects CC at RR, and the line x=x2x = x_2 intersects CC at SS, such that the yy-coordinates of RR and SS are positive. Let ∠ROM=π6\angle ROM = \dfrac{\pi}{6} and ∠SOM=π3\angle SOM = \dfrac{\pi}{3}, where OO denotes the origin (0,0)(0, 0). Let ∣XY∣|XY| denote the length of the line segment XYXY. Then which of the following statements is (are) TRUE?
  1. (A)The equation of the line joining PP and QQ is 2x+3y=3(1+3)2x + 3y = 3(1 + \sqrt{3})
  2. (B)The equation of the line joining PP and QQ is 2x+y=3(1+3)2x + y = 3(1 + \sqrt{3})
  3. (C)If N2=(x2,0)N_2 = (x_2, 0), then 3∣N2Q∣=2∣N2S∣3|N_2Q| = 2|N_2S|
  4. (D)If N1=(x1,0)N_1 = (x_1, 0), then 9∣N1P∣=4∣N1R∣9|N_1P| = 4|N_1R|

Tests: Use the auxiliary circle and eccentric angles to locate points on an ellipse.

Show solution
  1. CC is the auxiliary circle of the ellipse, so RR and SS are at angles π6\dfrac{\pi}{6} and π3\dfrac{\pi}{3}: R=(332,32)R = \left(\dfrac{3\sqrt{3}}{2}, \dfrac{3}{2}\right), S=(32,332)S = \left(\dfrac{3}{2}, \dfrac{3\sqrt{3}}{2}\right).
  2. PP and QQ have eccentric angles π6\dfrac{\pi}{6} and π3\dfrac{\pi}{3}: P=(3cos⁡θ,2sin⁡θ)=(332,1)P = (3\cos\theta, 2\sin\theta) = \left(\dfrac{3\sqrt{3}}{2}, 1\right), Q=(32,3)Q = \left(\dfrac{3}{2}, \sqrt{3}\right).

    Why: A point on the ellipse and its point on the auxiliary circle share the x-coordinate; y scales by b/a = 2/3.

  3. Slope of PQ=3−132−332=−23PQ = \dfrac{\sqrt{3} - 1}{\frac{3}{2} - \frac{3\sqrt{3}}{2}} = -\dfrac{2}{3}. Line: 2x+3y=2⋅332+3⋅1=3(1+3)2x + 3y = 2 \cdot \dfrac{3\sqrt{3}}{2} + 3 \cdot 1 = 3(1 + \sqrt{3}). (A) TRUE, (B) FALSE.
  4. (C) ∣N2Q∣=3|N_2Q| = \sqrt{3}, ∣N2S∣=332|N_2S| = \dfrac{3\sqrt{3}}{2}: 33=2⋅3323\sqrt{3} = 2 \cdot \dfrac{3\sqrt{3}}{2}. TRUE.
  5. (D) ∣N1P∣=1|N_1P| = 1, ∣N1R∣=32|N_1R| = \dfrac{3}{2}: 9≠69 \ne 6. FALSE (the true relation is 3∣N1P∣=2∣N1R∣3|N_1P| = 2|N_1R|).
AnswerAnswer: (A), (C)
Ask about this question
Q8

Mathematics, Question 8 (4 marks)

Maxima and minima · +4 / −2
Let R\mathbb{R} denote the set of all real numbers. Let f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} be defined by f(x)=6x+sin⁡x2x+sin⁡xf(x) = \dfrac{6x + \sin x}{2x + \sin x} if x≠0x \ne 0, and f(x)=73f(x) = \dfrac{7}{3} if x=0x = 0. Then which of the following statements is (are) TRUE?
  1. (A)The point x=0x = 0 is a point of local maxima of ff
  2. (B)The point x=0x = 0 is a point of local minima of ff
  3. (C)Number of points of local maxima of ff in the interval [π,6π][\pi, 6\pi] is 3
  4. (D)Number of points of local minima of ff in the interval [2π,4π][2\pi, 4\pi] is 1

Tests: Find the sign of f′f' through sin⁡x−xcos⁡x\sin x - x\cos x and count the roots of tan⁡x=x\tan x = x in an interval.

Show solution
  1. ff is continuous at 0: lim⁡x→06+sin⁡xx2+sin⁡xx=73\displaystyle\lim_{x \to 0} \dfrac{6 + \frac{\sin x}{x}}{2 + \frac{\sin x}{x}} = \dfrac{7}{3}. For x≠0x \ne 0, 2x+sin⁡x≠02x + \sin x \ne 0.
  2. f′(x)=(6+cos⁡x)(2x+sin⁡x)−(6x+sin⁡x)(2+cos⁡x)(2x+sin⁡x)2=4(sin⁡x−xcos⁡x)(2x+sin⁡x)2f'(x) = \dfrac{(6 + \cos x)(2x + \sin x) - (6x + \sin x)(2 + \cos x)}{(2x + \sin x)^2} = \dfrac{4(\sin x - x\cos x)}{(2x + \sin x)^2}.

    Why: The 12x and sin x cos x terms cancel.

  3. Near 0, sin⁡x−xcos⁡x≈x33\sin x - x\cos x \approx \dfrac{x^3}{3}: f′<0f' < 0 just left of 0 and f′>0f' > 0 just right. So x=0x = 0 is a local minimum: (B) TRUE, (A) FALSE.
  4. For x>0x > 0, h(x)=sin⁡x−xcos⁡xh(x) = \sin x - x\cos x has h′(x)=xsin⁡xh'(x) = x\sin x and changes sign exactly at the roots of tan⁡x=x\tan x = x: about 4.49, 7.73, 10.90, 14.07, 17.22, 20.37 (one in each (nπ,nπ+π2)\left(n\pi, n\pi + \dfrac{\pi}{2}\right)). h>0h > 0 on (0,4.49)(0, 4.49), since h(π)=πh(\pi) = \pi, and the sign alternates after that.
  5. So ff rises to a local maximum at 4.49, falls to a local minimum at 7.73, maximum at 10.90, minimum at 14.07, maximum at 17.22, minimum at 20.37.
  6. (C) [π,6π]≈[3.14,18.85][\pi, 6\pi] \approx [3.14, 18.85] holds the maxima 4.49, 10.90, 17.22: three. TRUE.
  7. (D) [2π,4π]≈[6.28,12.57][2\pi, 4\pi] \approx [6.28, 12.57] holds the minimum 7.73 only: one. TRUE.
AnswerAnswer: (B), (C), (D)
Ask about this question

Mathematics, Section 3: 8 questions, numerical value answer (truncate or round off to two decimal places): +4 if correct, 0 in all other cases

Q9

Mathematics, Question 9 (4 marks)

Homogeneous differential equations · +4
Let y(x)y(x) be the solution of the differential equation x2dydx+xy=x2+y2x^2\dfrac{dy}{dx} + xy = x^2 + y^2, x>1ex > \dfrac{1}{e}, satisfying y(1)=0y(1) = 0. Then the value of 2(y(e))2y(e2)2\dfrac{(y(e))^2}{y(e^2)} is ______.

Tests: Solve a homogeneous first-order differential equation with y = vx.

Show solution
  1. Divide by x2x^2: dydx=1+(yx)2−yx\dfrac{dy}{dx} = 1 + \left(\dfrac{y}{x}\right)^2 - \dfrac{y}{x}, a homogeneous equation. Put y=vxy = vx.
  2. v+xdvdx=1+v2−vv + x\dfrac{dv}{dx} = 1 + v^2 - v, so xdvdx=(v−1)2x\dfrac{dv}{dx} = (v - 1)^2 and dv(v−1)2=dxx\dfrac{dv}{(v - 1)^2} = \dfrac{dx}{x}.
  3. Integrate: −1v−1=ln⁡x+C-\dfrac{1}{v - 1} = \ln x + C. At x=1x = 1, v=0v = 0: C=1C = 1.
  4. v=1−11+ln⁡x=ln⁡x1+ln⁡xv = 1 - \dfrac{1}{1 + \ln x} = \dfrac{\ln x}{1 + \ln x}, so y=xln⁡x1+ln⁡xy = \dfrac{x\ln x}{1 + \ln x} (defined for x>1ex > \dfrac{1}{e}).
  5. y(e)=e2y(e) = \dfrac{e}{2}, y(e2)=2e23y(e^2) = \dfrac{2e^2}{3}. Then 2⋅e2/42e2/3=342 \cdot \dfrac{e^2/4}{2e^2/3} = \dfrac{3}{4}.
AnswerAnswer: 0.75
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Binomial theorem · +4
Let a0,a1,…,a23a_0, a_1, \ldots, a_{23} be real numbers such that (1+25x)23=∑i=023aixi\left(1 + \dfrac{2}{5}x\right)^{23} = \displaystyle\sum_{i=0}^{23} a_ix^i for every real number xx. Let ara_r be the largest among the numbers aja_j for 0≤j≤230 \le j \le 23. Then the value of rr is ______.

Tests: Find the greatest coefficient in a binomial expansion with the ratio of consecutive coefficients.

Show solution
  1. ai=(23i)(25)ia_i = \binom{23}{i}\left(\dfrac{2}{5}\right)^i, all positive.
  2. ai+1ai=23−ii+1⋅25\dfrac{a_{i+1}}{a_i} = \dfrac{23 - i}{i + 1} \cdot \dfrac{2}{5}.
  3. ai+1>ai  ⟺  2(23−i)>5(i+1)  ⟺  7i<41  ⟺  i≤5a_{i+1} > a_i \iff 2(23 - i) > 5(i + 1) \iff 7i < 41 \iff i \le 5.

    Why: The terms increase while the ratio exceeds 1.

  4. So a0<a1<⋯<a6a_0 < a_1 < \cdots < a_6 and a6>a7>⋯a_6 > a_7 > \cdots: the largest is a6a_6.
AnswerAnswer: 6
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Probability (Bayes' theorem) · +4
A factory has a total of three manufacturing units, M1M_1, M2M_2, and M3M_3, which produce bulbs independent of each other. The units M1M_1, M2M_2, and M3M_3 produce bulbs in the proportions of 2:2:12 : 2 : 1, respectively. It is known that 20%20\% of the bulbs produced in the factory are defective. It is also known that, of all the bulbs produced by M1M_1, 15%15\% are defective. Suppose that, if a randomly chosen bulb produced in the factory is found to be defective, the probability that it was produced by M2M_2 is 25\dfrac{2}{5}. If a bulb is chosen randomly from the bulbs produced by M3M_3, then the probability that it is defective is ______.

Tests: Use total probability and Bayes' theorem to find an unknown conditional probability.

Show solution
  1. P(M1)=P(M2)=25P(M_1) = P(M_2) = \dfrac{2}{5}, P(M3)=15P(M_3) = \dfrac{1}{5}, P(D)=0.2P(D) = 0.2, P(D∣M1)=0.15P(D \mid M_1) = 0.15.
  2. P(M1∩D)=0.4×0.15=0.06P(M_1 \cap D) = 0.4 \times 0.15 = 0.06.
  3. P(M2∩D)=P(M2∣D) P(D)=25×0.2=0.08P(M_2 \cap D) = P(M_2 \mid D)\,P(D) = \dfrac{2}{5} \times 0.2 = 0.08.

    Why: Bayes' theorem read backwards.

  4. P(M3∩D)=0.2−0.06−0.08=0.06P(M_3 \cap D) = 0.2 - 0.06 - 0.08 = 0.06.
  5. P(D∣M3)=0.060.2=0.3P(D \mid M_3) = \dfrac{0.06}{0.2} = 0.3.
AnswerAnswer: 0.30
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Vectors (coplanarity) · +4
Consider the vectors x⃗=i^+2j^+3k^\vec{x} = \hat{i} + 2\hat{j} + 3\hat{k}, y⃗=2i^+3j^+k^\vec{y} = 2\hat{i} + 3\hat{j} + \hat{k}, and z⃗=3i^+j^+2k^\vec{z} = 3\hat{i} + \hat{j} + 2\hat{k}. For two distinct positive real numbers α\alpha and β\beta, define X⃗=αx⃗+βy⃗−z⃗\vec{X} = \alpha\vec{x} + \beta\vec{y} - \vec{z}, Y⃗=αy⃗+βz⃗−x⃗\vec{Y} = \alpha\vec{y} + \beta\vec{z} - \vec{x}, and Z⃗=αz⃗+βx⃗−y⃗\vec{Z} = \alpha\vec{z} + \beta\vec{x} - \vec{y}. If the vectors X⃗\vec{X}, Y⃗\vec{Y}, and Z⃗\vec{Z} lie in a plane, then the value of α+β−3\alpha + \beta - 3 is ______.

Tests: Test coplanarity with the scalar triple product and factor a circulant determinant.

Show solution
  1. [X⃗ Y⃗ Z⃗]=∣αβ−1−1αββ−1α∣[x⃗ y⃗ z⃗][\vec{X}\ \vec{Y}\ \vec{Z}] = \begin{vmatrix} \alpha & \beta & -1 \\ -1 & \alpha & \beta \\ \beta & -1 & \alpha \end{vmatrix} [\vec{x}\ \vec{y}\ \vec{z}].

    Why: The box product of combinations is the coefficient determinant times the box product of the originals.

  2. [x⃗ y⃗ z⃗]=∣123231312∣=5−2−21=−18≠0[\vec{x}\ \vec{y}\ \vec{z}] = \begin{vmatrix} 1 & 2 & 3 \\ 2 & 3 & 1 \\ 3 & 1 & 2 \end{vmatrix} = 5 - 2 - 21 = -18 \ne 0, so the coefficient determinant must be 0.
  3. It is circulant in a=αa = \alpha, b=βb = \beta, c=−1c = -1: a3+b3+c3−3abc=12(a+b+c)[(a−b)2+(b−c)2+(c−a)2]a^3 + b^3 + c^3 - 3abc = \dfrac{1}{2}(a + b + c)\left[(a - b)^2 + (b - c)^2 + (c - a)^2\right].
  4. The bracket is 0 only if α=β=−1\alpha = \beta = -1, impossible (α≠β\alpha \ne \beta, both positive). So α+β−1=0\alpha + \beta - 1 = 0.
  5. α+β−3=1−3=−2\alpha + \beta - 3 = 1 - 3 = -2.
AnswerAnswer: −2
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Complex numbers (cube roots of unity) · +4
For a non-zero complex number zz, let arg⁡(z)\arg(z) denote the principal argument of zz, with −π<arg⁡(z)≤π-\pi < \arg(z) \le \pi. Let ω\omega be the cube root of unity for which 0<arg⁡(ω)<π0 < \arg(\omega) < \pi. Let α=arg⁡(∑n=12025(−ω)n)\alpha = \arg\left(\displaystyle\sum_{n=1}^{2025} (-\omega)^n\right). Then the value of 3απ\dfrac{3\alpha}{\pi} is ______.

Tests: Sum powers of a root of unity by its period and take the principal argument.

Show solution
  1. ω=ei2π/3\omega = e^{i2\pi/3}, so −ω=e−iπ/3-\omega = e^{-i\pi/3} is a 6th root of unity and its powers repeat every 6, summing to 0 over each block of 6.
  2. 2025=6×337+32025 = 6 \times 337 + 3, so the sum is (−ω)+(−ω)2+(−ω)3=−ω+ω2−1(-\omega) + (-\omega)^2 + (-\omega)^3 = -\omega + \omega^2 - 1.
  3. With 1+ω+ω2=01 + \omega + \omega^2 = 0: −ω+ω2−1=−2−2ω=2ω2-\omega + \omega^2 - 1 = -2 - 2\omega = 2\omega^2.
  4. ω2=e−i2π/3\omega^2 = e^{-i2\pi/3}, so α=arg⁡(2ω2)=−2π3\alpha = \arg(2\omega^2) = -\dfrac{2\pi}{3}.

    Why: The principal argument lies in (−π, π], so 4π/3 becomes −2π/3.

  5. 3απ=−2\dfrac{3\alpha}{\pi} = -2.
AnswerAnswer: −2
Ask about this question
Q14

Mathematics, Question 14 (4 marks)

Derivative of inverse functions · +4
Let R\mathbb{R} denote the set of all real numbers. Let f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} and g:R→(0,4)g: \mathbb{R} \rightarrow (0, 4) be functions defined by f(x)=log⁡e(x2+2x+4)f(x) = \log_e(x^2 + 2x + 4), and g(x)=41+e−2xg(x) = \dfrac{4}{1 + e^{-2x}}. Define the composite function f∘g−1f \circ g^{-1} by (f∘g−1)(x)=f(g−1(x))(f \circ g^{-1})(x) = f(g^{-1}(x)), where g−1g^{-1} is the inverse of the function gg. Then the value of the derivative of the composite function f∘g−1f \circ g^{-1} at x=2x = 2 is ______.

Tests: Differentiate a composite with an inverse function using (g⁻¹)'(a) = 1/g'(g⁻¹(a)).

Show solution
  1. g−1(2)g^{-1}(2): 41+e−2x=2\dfrac{4}{1 + e^{-2x}} = 2 gives e−2x=1e^{-2x} = 1, x=0x = 0.
  2. Chain rule: (f∘g−1)′(2)=f′(g−1(2))⋅(g−1)′(2)=f′(0)g′(0)(f \circ g^{-1})'(2) = f'(g^{-1}(2)) \cdot (g^{-1})'(2) = \dfrac{f'(0)}{g'(0)}.

    Why: The derivative of the inverse is 1 over the derivative of g at the matching point.

  3. f′(x)=2x+2x2+2x+4f'(x) = \dfrac{2x + 2}{x^2 + 2x + 4}, so f′(0)=12f'(0) = \dfrac{1}{2}.
  4. g′(x)=8e−2x(1+e−2x)2g'(x) = \dfrac{8e^{-2x}}{(1 + e^{-2x})^2}, so g′(0)=84=2g'(0) = \dfrac{8}{4} = 2.
  5. (f∘g−1)′(2)=1/22=14=0.25(f \circ g^{-1})'(2) = \dfrac{1/2}{2} = \dfrac{1}{4} = 0.25.
AnswerAnswer: 0.25
Ask about this question
Q15

Mathematics, Question 15 (4 marks)

Trigonometric series (telescoping) · +4
Let α=1sin⁡60∘sin⁡61∘+1sin⁡62∘sin⁡63∘+⋯+1sin⁡118∘sin⁡119∘\alpha = \dfrac{1}{\sin 60^\circ \sin 61^\circ} + \dfrac{1}{\sin 62^\circ \sin 63^\circ} + \cdots + \dfrac{1}{\sin 118^\circ \sin 119^\circ}. Then the value of (cosec⁡1∘α)2\left(\dfrac{\operatorname{cosec} 1^\circ}{\alpha}\right)^2 is ______.

Tests: Split a trigonometric product with the sine of a difference and cancel terms by symmetry.

Show solution
  1. 1sin⁡Asin⁡(A+1∘)=sin⁡((A+1∘)−A)sin⁡1∘sin⁡Asin⁡(A+1∘)=cosec⁡1∘(cot⁡A−cot⁡(A+1∘))\dfrac{1}{\sin A \sin(A + 1^\circ)} = \dfrac{\sin\left((A + 1^\circ) - A\right)}{\sin 1^\circ \sin A \sin(A + 1^\circ)} = \operatorname{cosec} 1^\circ\left(\cot A - \cot(A + 1^\circ)\right).
  2. So α=cosec⁡1∘[(cot⁡60∘+cot⁡62∘+⋯+cot⁡118∘)−(cot⁡61∘+cot⁡63∘+⋯+cot⁡119∘)]\alpha = \operatorname{cosec} 1^\circ\left[(\cot 60^\circ + \cot 62^\circ + \cdots + \cot 118^\circ) - (\cot 61^\circ + \cot 63^\circ + \cdots + \cot 119^\circ)\right] (30 terms each).

    Why: Steps of 2°, so the sum does not telescope directly.

  3. Use cot⁡(180∘−θ)=−cot⁡θ\cot(180^\circ - \theta) = -\cot\theta. Odd angles: 61∘61^\circ pairs with 119∘119^\circ, ..., 89∘89^\circ with 91∘91^\circ, so that sum is 0.
  4. Even angles: 62∘62^\circ pairs with 118∘118^\circ, ..., 88∘88^\circ with 92∘92^\circ, cot⁡90∘=0\cot 90^\circ = 0, leaving cot⁡60∘=13\cot 60^\circ = \dfrac{1}{\sqrt{3}}.
  5. α=cosec⁡1∘3\alpha = \dfrac{\operatorname{cosec} 1^\circ}{\sqrt{3}}, so (cosec⁡1∘α)2=3\left(\dfrac{\operatorname{cosec} 1^\circ}{\alpha}\right)^2 = 3.
AnswerAnswer: 3
Ask about this question
Q16

Mathematics, Question 16 (4 marks)

Definite integration (properties) · +4
If α=∫1/22tan⁡−1x2x2−3x+2 dx\alpha = \displaystyle\int_{1/2}^{2} \dfrac{\tan^{-1}x}{2x^2 - 3x + 2}\,dx, then the value of 7tan⁡(2α7π)\sqrt{7}\tan\left(\dfrac{2\alpha\sqrt{7}}{\pi}\right) is ______. (Here, the inverse trigonometric function tan⁡−1x\tan^{-1}x assumes values in (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right).)

Tests: Use the substitution x→1xx \to \dfrac{1}{x} with tan⁡−1x+tan⁡−11x=π2\tan^{-1}x + \tan^{-1}\dfrac{1}{x} = \dfrac{\pi}{2} to remove the inverse tangent.

Show solution
  1. Substitute x=1ux = \dfrac{1}{u}: the limits swap, dx=−duu2dx = -\dfrac{du}{u^2} and 2x2−3x+2=2−3u+2u2u22x^2 - 3x + 2 = \dfrac{2 - 3u + 2u^2}{u^2}, so α=∫1/22tan⁡−1(1/u)2u2−3u+2 du\alpha = \displaystyle\int_{1/2}^{2} \dfrac{\tan^{-1}(1/u)}{2u^2 - 3u + 2}\,du.

    Why: The limits 1/2 and 2 are reciprocals, which points to x → 1/x.

  2. For u>0u > 0, tan⁡−11u=π2−tan⁡−1u\tan^{-1}\dfrac{1}{u} = \dfrac{\pi}{2} - \tan^{-1}u. Adding the two forms: 2α=π2I2\alpha = \dfrac{\pi}{2}I, where I=∫1/22dx2x2−3x+2I = \displaystyle\int_{1/2}^{2} \dfrac{dx}{2x^2 - 3x + 2}.
  3. 2x2−3x+2=2[(x−34)2+716]2x^2 - 3x + 2 = 2\left[\left(x - \dfrac{3}{4}\right)^2 + \dfrac{7}{16}\right], so I=27[tan⁡−14x−37]1/22=27(tan⁡−157+tan⁡−117)I = \dfrac{2}{\sqrt{7}}\left[\tan^{-1}\dfrac{4x - 3}{\sqrt{7}}\right]_{1/2}^{2} = \dfrac{2}{\sqrt{7}}\left(\tan^{-1}\dfrac{5}{\sqrt{7}} + \tan^{-1}\dfrac{1}{\sqrt{7}}\right).
  4. tan⁡−157+tan⁡−117=tan⁡−16/71−5/7=tan⁡−137\tan^{-1}\dfrac{5}{\sqrt{7}} + \tan^{-1}\dfrac{1}{\sqrt{7}} = \tan^{-1}\dfrac{6/\sqrt{7}}{1 - 5/7} = \tan^{-1}3\sqrt{7} (the product 57<1\dfrac{5}{7} < 1).
  5. α=π4⋅27tan⁡−137\alpha = \dfrac{\pi}{4} \cdot \dfrac{2}{\sqrt{7}}\tan^{-1}3\sqrt{7}, so 2α7π=tan⁡−137\dfrac{2\alpha\sqrt{7}}{\pi} = \tan^{-1}3\sqrt{7}.
  6. 7tan⁡(tan⁡−137)=7⋅37=21\sqrt{7}\tan\left(\tan^{-1}3\sqrt{7}\right) = \sqrt{7} \cdot 3\sqrt{7} = 21.
AnswerAnswer: 21
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Units and dimensions · +3 / −1
A temperature difference can generate e.m.f. in some materials. Let SS be the e.m.f. produced per unit temperature difference between the ends of a wire, σ\sigma the electrical conductivity and κ\kappa the thermal conductivity of the material of the wire. Taking M,L,T,IM, L, T, I and KK as dimensions of mass, length, time, current and temperature, respectively, the dimensional formula of the quantity Z=S2σκZ = \dfrac{S^2\sigma}{\kappa} is:
  1. (A)[M0L0T0I0K0][M^0L^0T^0I^0K^0]
  2. (B)[M0L0T0I0K−1][M^0L^0T^0I^0K^{-1}]
  3. (C)[M1L2T−2I−1K−1][M^1L^2T^{-2}I^{-1}K^{-1}]
  4. (D)[M1L2T−4I−1K−1][M^1L^2T^{-4}I^{-1}K^{-1}]

Tests: Find the dimensions of a combination of quantities by writing each in SI units and cancelling.

Show solution
  1. Work in SI units first: SS is volt per kelvin, [S]=V K−1[S] = \mathrm{V\,K^{-1}}.

    Why: Units are easier to combine than raw M, L, T, I, K powers.

  2. Electrical conductivity: J=σEJ = \sigma E, so [σ]=A m−2V m−1=A V−1 m−1[\sigma] = \dfrac{\mathrm{A\,m^{-2}}}{\mathrm{V\,m^{-1}}} = \mathrm{A\,V^{-1}\,m^{-1}}.
  3. Thermal conductivity: heat current =κA ΔTΔx= \kappa A\,\dfrac{\Delta T}{\Delta x}, so [κ]=W m−1 K−1[\kappa] = \mathrm{W\,m^{-1}\,K^{-1}}.
  4. Z=S2σκ=V2K−2⋅A V−1m−1W m−1K−1=V AW K−1Z = \dfrac{S^2\sigma}{\kappa} = \dfrac{\mathrm{V^2K^{-2}} \cdot \mathrm{A\,V^{-1}m^{-1}}}{\mathrm{W\,m^{-1}K^{-1}}} = \dfrac{\mathrm{V\,A}}{\mathrm{W}}\,\mathrm{K^{-1}}.
  5. Since V A=W\mathrm{V\,A} = \mathrm{W}, ZZ has the unit K−1\mathrm{K^{-1}}: [M0L0T0I0K−1][M^0L^0T^0I^0K^{-1}].

    Why: ZT (with T the temperature) is the dimensionless thermoelectric figure of merit.

AnswerAnswer: (B) [M0L0T0I0K−1][M^0L^0T^0I^0K^{-1}]
Ask about this question
Q2

Physics, Question 2 (3 marks)

Gauss's law and electric flux · +3 / −1
Two co-axial conducting cylinders of same length ℓ\ell with radii 2R\sqrt{2}R and 2R2R are kept, as shown in Fig. 1. The charge on the inner cylinder is QQ and the outer cylinder is grounded. The annular region between the cylinders is filled with a material of dielectric constant κ=5\kappa = 5. Consider an imaginary plane of the same length ℓ\ell at a distance RR from the common axis of the cylinders. This plane is parallel to the axis of the cylinders. The cross-sectional view of this arrangement is shown in Fig. 2. Ignoring edge effects, the flux of the electric field through the plane is (ϵ0\epsilon_0 is the permittivity of free space): (Fig. 1 shows the two cylinders with a flat plane of height ℓ\ell slicing through both, parallel to the axis; the outer cylinder is earthed. Fig. 2 is the cross-section: the inner circle of radius 2R\sqrt{2}R carries QQ, the shaded dielectric annulus runs out to radius 2R2R, and the plane appears as a straight line at perpendicular distance RR from the centre, cutting through both circles.)
  1. (A)Q30ϵ0\dfrac{Q}{30\epsilon_0}
  2. (B)Q15ϵ0\dfrac{Q}{15\epsilon_0}
  3. (C)Q60ϵ0\dfrac{Q}{60\epsilon_0}
  4. (D)Q120ϵ0\dfrac{Q}{120\epsilon_0}

Tests: Find the electric flux of a line-charge field through a flat strip using the angle it subtends.

Show solution
  1. Field: zero inside the inner conductor (r<2Rr < \sqrt{2}R) and zero outside the grounded outer cylinder (r>2Rr > 2R). In the dielectric, E=Q2πκϵ0 ℓ rE = \dfrac{Q}{2\pi\kappa\epsilon_0\,\ell\,r}, radial.

    Why: The grounded outer cylinder carries −Q on its inner face, so the net enclosed charge outside it is zero.

  2. So only the parts of the plane inside the annulus carry flux. On the line at distance RR from the axis, a point at distance yy along the line is at r=R2+y2r = \sqrt{R^2 + y^2}. It is in the annulus for 2R2≤R2+y2≤4R22R^2 \le R^2 + y^2 \le 4R^2, i.e. R≤∣y∣≤3RR \le |y| \le \sqrt{3}R.
  3. For a radial field from a line, the flux through a strip equals (charge per length / κϵ0\kappa\epsilon_0) times the fraction of the full angle 2π2\pi the strip subtends at the axis. The strip R≤y≤3RR \le y \le \sqrt{3}R subtends tan⁡−13−tan⁡−11=π3−π4=π12\tan^{-1}\sqrt{3} - \tan^{-1}1 = \dfrac{\pi}{3} - \dfrac{\pi}{4} = \dfrac{\pi}{12}.

    Why: Directly: ∫E Rr dy∝∫R dyR2+y2=tan⁡−1(y/R)\int E\,\dfrac{R}{r}\,dy \propto \int \dfrac{R\,dy}{R^2+y^2} = \tan^{-1}(y/R).

  4. Two such strips (above and below the foot of the perpendicular): total angle π6\dfrac{\pi}{6}.
  5. Φ=Qκϵ0⋅π/62π=Q5ϵ0⋅112=Q60ϵ0\Phi = \dfrac{Q}{\kappa\epsilon_0}\cdot\dfrac{\pi/6}{2\pi} = \dfrac{Q}{5\epsilon_0}\cdot\dfrac{1}{12} = \dfrac{Q}{60\epsilon_0}.
AnswerAnswer: (C) Q60ϵ0\dfrac{Q}{60\epsilon_0}
Ask about this question
Q3

Physics, Question 3 (3 marks)

Simple harmonic motion (angular) · +3 / −1
As shown in the figures, a uniform rod OO′OO' of length ll is hinged at the point OO and held in place vertically between two walls using two massless springs of same spring constant. The springs are connected at the midpoint and at the top-end (O′O') of the rod, as shown in Fig. 1 and the rod is made to oscillate by a small angular displacement. The frequency of oscillation of the rod is f1f_1. On the other hand, if both the springs are connected at the midpoint of the rod, as shown in Fig. 2 and the rod is made to oscillate by a small angular displacement, then the frequency of oscillation is f2f_2. Ignoring gravity and assuming motion only in the plane of the diagram, the value of f1f2\dfrac{f_1}{f_2} is: (Fig. 1: the rod stands on the floor hinged at O; one horizontal spring joins the left wall to the rod's midpoint (height l/2l/2), the other joins the top end O' to the right wall. Fig. 2: both springs are attached at the midpoint, one to each wall.)
  1. (A)2
  2. (B)2\sqrt{2}
  3. (C)52\sqrt{\dfrac{5}{2}}
  4. (D)25\sqrt{\dfrac{2}{5}}

Tests: Find the angular SHM frequency of a hinged rod restrained by springs at different heights.

Show solution
  1. Turn the rod by a small angle θ\theta about O. A spring attached at height hh is stretched or compressed by hθh\theta and gives a restoring torque k(hθ)h=kh2θk(h\theta)h = kh^2\theta.

    Why: Each spring force is horizontal and acts at lever arm h about O.

  2. Fig. 1: τ=k(l2)2θ+kl2θ=54kl2θ\tau = k\left(\dfrac{l}{2}\right)^2\theta + k l^2\theta = \dfrac{5}{4}kl^2\theta.
  3. Fig. 2: τ=2k(l2)2θ=12kl2θ\tau = 2k\left(\dfrac{l}{2}\right)^2\theta = \dfrac{1}{2}kl^2\theta.
  4. Same rod, same moment of inertia I=ml23I = \dfrac{ml^2}{3} about O, and f=12πCIf = \dfrac{1}{2\pi}\sqrt{\dfrac{C}{I}} with CC the torsional constant, so f1f2=5/41/2=52\dfrac{f_1}{f_2} = \sqrt{\dfrac{5/4}{1/2}} = \sqrt{\dfrac{5}{2}}.
AnswerAnswer: (C) 5/2\sqrt{5/2}
Ask about this question
Q4

Physics, Question 4 (3 marks)

Gravitation (binary stars) · +3 / −1
Consider a star of mass m2m_2 kg revolving in a circular orbit around another star of mass m1m_1 kg with m1≫m2m_1 \gg m_2. The heavier star slowly acquires mass from the lighter star at a constant rate of γ\gamma kg/s. In this transfer process, there is no other loss of mass. If the separation between the centers of the stars is rr, then its relative rate of change 1rdrdt\dfrac{1}{r}\dfrac{dr}{dt} (in s−1\mathrm{s^{-1}}) is given by:
  1. (A)−3γ2m2-\dfrac{3\gamma}{2m_2}
  2. (B)−2γm2-\dfrac{2\gamma}{m_2}
  3. (C)−2γm1-\dfrac{2\gamma}{m_1}
  4. (D)−3γ2m1-\dfrac{3\gamma}{2m_1}

Tests: Use conservation of angular momentum to find how a binary's separation changes when mass moves between the stars.

Show solution
  1. The transfer is internal and slow, so the total mass M=m1+m2M = m_1 + m_2 and the orbital angular momentum are conserved, with dm1dt=+γ\dfrac{dm_1}{dt} = +\gamma, dm2dt=−γ\dfrac{dm_2}{dt} = -\gamma.

    Why: No mass is lost from the system and no external torque acts.

  2. For a circular two-body orbit, L=μGMrL = \mu\sqrt{GMr} with μ=m1m2M\mu = \dfrac{m_1m_2}{M}. With MM fixed, m1m2rm_1m_2\sqrt{r} is constant.
  3. Take logs and differentiate: m˙1m1+m˙2m2+12r˙r=0⇒1rdrdt=2γ(1m2−1m1)\dfrac{\dot m_1}{m_1} + \dfrac{\dot m_2}{m_2} + \dfrac{1}{2}\dfrac{\dot r}{r} = 0 \Rightarrow \dfrac{1}{r}\dfrac{dr}{dt} = 2\gamma\left(\dfrac{1}{m_2} - \dfrac{1}{m_1}\right).
  4. With m1≫m2m_1 \gg m_2: 1rdrdt≈+2γm2\dfrac{1}{r}\dfrac{dr}{dt} \approx +\dfrac{2\gamma}{m_2}. The separation grows: mass flowing from the lighter to the heavier star widens the orbit.

    Why: Treating m1m_1 as fixed at the centre gives the same: m22m1rm_2^2 m_1 r constant, so r˙/r=2γ/m2−γ/m1\dot r / r = 2\gamma/m_2 - \gamma/m_1.

  5. What is wrong with the question: all four options are negative (a shrinking orbit). The correct result +2γm2+\dfrac{2\gamma}{m_2} has the size of option (B) but the opposite sign, so no option is correct. This is why the official key gave every candidate full marks.
AnswerAnswer: 1rdrdt≈+2γm2\dfrac{1}{r}\dfrac{dr}{dt} \approx +\dfrac{2\gamma}{m_2}, which matches no option ((B) has the wrong sign); the official key gave full marks to everyone.
Ask about this question

Physics, Section 2: 4 questions, one or more options correct: +4 if all the correct options (and nothing else) are chosen; partial marks +3, +2 or +1 when only some correct options are chosen and no wrong one; 0 if unanswered; −2 in all other cases

Q5

Physics, Question 5 (4 marks)

Electrostatics of conductors (earthing) · +4 / −2
A positive point charge of 10−810^{-8} C is kept at a distance of 20 cm from the center of a neutral conducting sphere of radius 10 cm. The sphere is then grounded and the charge on the sphere is measured. The grounding is then removed and subsequently the point charge is moved by a distance of 10 cm further away from the center of the sphere along the radial direction. Taking 14πϵ0=9×109 Nm2/C2\dfrac{1}{4\pi\epsilon_0} = 9 \times 10^9\ \mathrm{Nm^2/C^2} (where ϵ0\epsilon_0 is the permittivity of free space), which of the following statements is/are correct:
  1. (A)Before the grounding, the electrostatic potential of the sphere is 450 V.
  2. (B)Charge flowing from the sphere to the ground because of grounding is 5×10−95 \times 10^{-9} C.
  3. (C)After the grounding is removed, the charge on the sphere is −5×10−9-5 \times 10^{-9} C.
  4. (D)The final electrostatic potential of the sphere is 300 V.

Tests: Find a conducting sphere's potential and charge near a point charge, with and without earthing.

Show solution
  1. The sphere is an equipotential, so find its potential at the centre: point charge at distance dd plus induced charges on the surface (at distance RR).

    Why: Induced charges all sit at distance R from the centre, so their potential there is k(total charge)/R.

  2. (A) Neutral sphere (induced charges sum to zero): V=kqd=9×109×10−80.2=450V = \dfrac{kq}{d} = \dfrac{9\times10^9 \times 10^{-8}}{0.2} = 450 V. True.
  3. Grounded: kq0.2+kQ0.1=0⇒Q=−q2=−5×10−9\dfrac{kq}{0.2} + \dfrac{kQ}{0.1} = 0 \Rightarrow Q = -\dfrac{q}{2} = -5\times10^{-9} C.
  4. (B) The sphere goes from 0 to −5×10−9-5\times10^{-9} C, i.e. 5×10−95\times10^{-9} C of positive charge leaves it for the ground (electrons actually come up from the earth). True.
  5. (C) Once the earth wire is removed the charge is trapped: −5×10−9-5\times10^{-9} C, whatever happens to the point charge later. True.
  6. (D) Point charge now at 30 cm: V=9×109(10−80.3−5×10−90.1)=300−450=−150V = 9\times10^9\left(\dfrac{10^{-8}}{0.3} - \dfrac{5\times10^{-9}}{0.1}\right) = 300 - 450 = -150 V, not 300 V. False.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Ray optics (mirrors and slabs) · +4 / −2
Two identical concave mirrors each of focal length ff are facing each other as shown in the schematic diagram. The focal length ff is much larger than the size of the mirrors. A glass slab of thickness tt and refractive index n0n_0 is kept equidistant from the mirrors and perpendicular to their common principal axis. A monochromatic point light source SS is embedded at the center of the slab on the principal axis, as shown in the schematic diagram. For the image to be formed on SS itself, which of the following distances between the two mirrors is/are correct: (The diagram shows the two concave mirrors facing each other on a common horizontal axis, the slab standing vertically midway between them, and S at the slab's centre on the axis.)
  1. (A)4f+(1−1n0)t4f + \left(1 - \dfrac{1}{n_0}\right)t
  2. (B)2f+(1−1n0)t2f + \left(1 - \dfrac{1}{n_0}\right)t
  3. (C)4f+(n0−1)t4f + (n_0 - 1)t
  4. (D)2f+(n0−1)t2f + (n_0 - 1)t

Tests: Locate images formed by two facing concave mirrors when the source sits inside a glass slab.

Show solution
  1. Let each mirror be at distance xx from S. Seen from a mirror, S lies under glass of thickness t/2t/2, so it appears shifted towards that mirror by t2(1−1n0)\dfrac{t}{2}\left(1 - \dfrac{1}{n_0}\right): apparent distance x−t2(1−1n0)x - \dfrac{t}{2}\left(1 - \dfrac{1}{n_0}\right).

    Why: Normal shift by a slab of thickness s is s(1 − 1/n), towards the observer.

  2. Case 1: each mirror images S back onto itself. The apparent source must be at the centre of curvature: x−t2(1−1n0)=2fx - \dfrac{t}{2}\left(1 - \dfrac{1}{n_0}\right) = 2f. Reflected rays retrace their paths through the glass and meet at S.
  3. Distance between mirrors =2x=4f+(1−1n0)t= 2x = 4f + \left(1 - \dfrac{1}{n_0}\right)t: (A) is correct.
  4. Case 2: light goes round both mirrors. If the apparent source is at the focus of the right mirror, it reflects a parallel beam, which crosses the whole slab undeviated, hits the left mirror and converges to its focus. With the same apparent shift on that side, the focus lands on S: x−t2(1−1n0)=fx - \dfrac{t}{2}\left(1 - \dfrac{1}{n_0}\right) = f.

    Why: A parallel beam along the axis is not shifted by a slab perpendicular to it.

  5. Distance =2f+(1−1n0)t= 2f + \left(1 - \dfrac{1}{n_0}\right)t: (B) is correct.
  6. (C), (D) use (n0−1)t(n_0 - 1)t, which is the extra optical path, not the apparent shift: a slab makes an object look closer by (1−1/n0)(1 - 1/n_0) of its thickness. False.
AnswerAnswer: (A), (B)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Electric field of charged sheets · +4 / −2
Six infinitely large and thin non-conducting sheets are fixed in configurations I and II. As shown in the figure, the sheets carry uniform surface charge densities which are indicated in terms of σ0\sigma_0. The separation between any two consecutive sheets is 1 μ1\ \mum. The various regions between the sheets are denoted as 1, 2, 3, 4 and 5. If σ0=9 μC/m2\sigma_0 = 9\ \mu\mathrm{C/m^2}, then which of the following statements is/are correct: (Take permittivity of free space ϵ0=9×10−12\epsilon_0 = 9 \times 10^{-12} F/m) (The figure shows six parallel vertical sheets in each configuration, regions 1 to 5 between them from left to right. Configuration I, left to right: +σ0,−σ0,+σ0,−σ0,+σ0,−σ0+\sigma_0, -\sigma_0, +\sigma_0, -\sigma_0, +\sigma_0, -\sigma_0. Configuration II: +σ0/2,−σ0,+σ0,−σ0,+σ0,−σ0/2+\sigma_0/2, -\sigma_0, +\sigma_0, -\sigma_0, +\sigma_0, -\sigma_0/2.)
  1. (A)In region 4 of the configuration I, the magnitude of the electric field is zero.
  2. (B)In region 3 of the configuration II, the magnitude of the electric field is σ0ϵ0\dfrac{\sigma_0}{\epsilon_0}.
  3. (C)Potential difference between the first and the last sheets of the configuration I is 5 V.
  4. (D)Potential difference between the first and the last sheets of the configuration II is zero.

Tests: Superpose the fields of several charged sheets to get the field in each gap and the potential difference across them.

Show solution
  1. Each sheet gives σ2ϵ0\dfrac{\sigma}{2\epsilon_0} pointing away from it. Between sheets, E=(charge to the left)−(charge to the right)2ϵ0E = \dfrac{(\text{charge to the left}) - (\text{charge to the right})}{2\epsilon_0} per unit area, positive meaning to the right. Total charge is zero in both configurations, so E=charge to the leftϵ0E = \dfrac{\text{charge to the left}}{\epsilon_0}.
  2. Config I, charge to the left of regions 1 to 5: σ0,0,σ0,0,σ0\sigma_0, 0, \sigma_0, 0, \sigma_0. Fields: σ0ϵ0,0,σ0ϵ0,0,σ0ϵ0\dfrac{\sigma_0}{\epsilon_0}, 0, \dfrac{\sigma_0}{\epsilon_0}, 0, \dfrac{\sigma_0}{\epsilon_0}.
  3. (A) Region 4 of I has zero field. True.
  4. (C) σ0ϵ0=9×10−69×10−12=106\dfrac{\sigma_0}{\epsilon_0} = \dfrac{9\times10^{-6}}{9\times10^{-12}} = 10^6 V/m, over three regions of 1 μ1\ \mum: ΔV=3×106×10−6=3\Delta V = 3 \times 10^6 \times 10^{-6} = 3 V, not 5 V. False.
  5. Config II, charge to the left of regions 1 to 5: σ02,−σ02,σ02,−σ02,σ02\dfrac{\sigma_0}{2}, -\dfrac{\sigma_0}{2}, \dfrac{\sigma_0}{2}, -\dfrac{\sigma_0}{2}, \dfrac{\sigma_0}{2}. Every region has ∣E∣=σ02ϵ0|E| = \dfrac{\sigma_0}{2\epsilon_0}, alternating in direction.
  6. (B) Region 3 of II has σ02ϵ0\dfrac{\sigma_0}{2\epsilon_0}, not σ0ϵ0\dfrac{\sigma_0}{\epsilon_0}. False.
  7. (D) Fields +,−,+,−,++, -, +, -, + (each 0.5×1060.5\times10^6 V/m over 1 μ1\ \mum) leave one uncancelled region: ΔV=0.5\Delta V = 0.5 V, not zero. False.
AnswerAnswer: (A)
Ask about this question
Q8

Physics, Question 8 (4 marks)

Heat engines and heat pumps · +4 / −2
The efficiency of a Carnot engine operating with a hot reservoir kept at a temperature of 1000 K is 0.4. It extracts 150 J of heat per cycle from the hot reservoir. The work extracted from this engine is being fully used to run a heat pump which has a coefficient of performance 10. The hot reservoir of the heat pump is at a temperature of 300 K. Which of the following statements is/are correct:
  1. (A)Work extracted from the Carnot engine in one cycle is 60 J.
  2. (B)Temperature of the cold reservoir of the Carnot engine is 600 K.
  3. (C)Temperature of the cold reservoir of the heat pump is 270 K.
  4. (D)Heat supplied to the hot reservoir of the heat pump in one cycle is 540 J.

Tests: Link a Carnot engine's work output to a heat pump's coefficient of performance and reservoir temperatures.

Show solution
  1. (A) W=ηQH=0.4×150=60W = \eta Q_H = 0.4 \times 150 = 60 J. True.
  2. (B) Carnot: η=1−TCTH⇒TC=(1−0.4)(1000)=600\eta = 1 - \dfrac{T_C}{T_H} \Rightarrow T_C = (1 - 0.4)(1000) = 600 K. True.
  3. (D) Heat-pump COP =QhotW=10⇒Qhot=10×60=600= \dfrac{Q_{\text{hot}}}{W} = 10 \Rightarrow Q_{\text{hot}} = 10 \times 60 = 600 J delivered to the hot reservoir, not 540 J (540 J is the heat taken from the cold side). False.
  4. (C) For an ideal (Carnot) heat pump, COP=ThTh−Tc=10⇒300−Tc=30⇒Tc=270\text{COP} = \dfrac{T_h}{T_h - T_c} = 10 \Rightarrow 300 - T_c = 30 \Rightarrow T_c = 270 K. True.

    Why: The question pairs the pump with a Carnot engine; the pump is taken as reversible, as the key does.

AnswerAnswer: (A), (B), (C)
Ask about this question

Physics, Section 3: 8 questions, numerical value answer (truncate or round to two decimal places): +4 if correct, 0 otherwise

Q9

Physics, Question 9 (4 marks)

Magnetic moment of a rotating charge · +4
A conducting solid sphere of radius RR and mass MM carries a charge QQ. The sphere is rotating about an axis passing through its center with a uniform angular speed ω\omega. The ratio of the magnitudes of the magnetic dipole moment to the angular momentum about the same axis is given as αQ2M\alpha\dfrac{Q}{2M}. The value of α\alpha is ___

Tests: Find the gyromagnetic ratio of a body whose charge and mass are distributed differently.

Show solution
  1. The sphere is a conductor, so its charge Q sits on the surface: magnetically it is a spinning charged shell. Its mass is spread through the solid.

    Why: Charge and mass are distributed differently, so the ratio is not simply Q/2M.

  2. Magnetic moment of a spinning shell: μ=QωR23\mu = \dfrac{Q\omega R^2}{3}.

    Why: Rings at polar angle θ\theta carry dq=Q2sin⁡θ dθdq = \dfrac{Q}{2}\sin\theta\,d\theta and give dq ω2π πR2sin⁡2θdq\,\dfrac{\omega}{2\pi}\,\pi R^2\sin^2\theta; integrating sin⁡3θ\sin^3\theta gives 4/34/3.

  3. Angular momentum of the solid sphere: L=25MR2ωL = \dfrac{2}{5}MR^2\omega.
  4. μL=QR2ω/32MR2ω/5=5Q6M=53⋅Q2M\dfrac{\mu}{L} = \dfrac{QR^2\omega/3}{2MR^2\omega/5} = \dfrac{5Q}{6M} = \dfrac{5}{3}\cdot\dfrac{Q}{2M}.
  5. α=53=1.67\alpha = \dfrac{5}{3} = 1.67 (truncating gives 1.66; the key accepts 1.65 to 1.67).
AnswerAnswer: 1.67
Ask about this question
Q10

Physics, Question 10 (4 marks)

Bohr model and positronium · +4
A hydrogen atom, initially at rest in its ground state, absorbs a photon of frequency ν1\nu_1 and ejects the electron with a kinetic energy of 10 eV. The electron then combines with a positron at rest to form a positronium atom in its ground state and simultaneously emits a photon of frequency ν2\nu_2. The center of mass of the resulting positronium atom moves with a kinetic energy of 5 eV. It is given that positron has the same mass as that of electron and the positronium atom can be considered as a Bohr atom, in which the electron and the positron orbit around their center of mass. Considering no other energy loss during the whole process, the difference between the two photon energies (in eV) is ___

Tests: Apply energy conservation to photo-ionisation and positronium formation, using the reduced-mass Bohr energy.

Show solution
  1. Photon 1: ionise hydrogen from the ground state and give the electron 10 eV: hν1=13.6+10=23.6h\nu_1 = 13.6 + 10 = 23.6 eV.
  2. Positronium is a Bohr atom with reduced mass μ=me2\mu = \dfrac{m_e}{2}, so its ground-state energy is −13.62=−6.8-\dfrac{13.6}{2} = -6.8 eV.

    Why: Bohr energies scale with the reduced mass: En=−13.6 μme 1n2E_n = -13.6\,\dfrac{\mu}{m_e}\,\dfrac{1}{n^2} eV.

  3. The centre of mass keeps 5 eV of kinetic energy (consistent with momentum conservation: p2/(2⋅2me)p^2/(2\cdot 2m_e) is half the electron's 10 eV).
  4. Energy before = after: 10+0=5+(−6.8)+hν2⇒hν2=11.810 + 0 = 5 + (-6.8) + h\nu_2 \Rightarrow h\nu_2 = 11.8 eV.
  5. hν1−hν2=23.6−11.8=11.8h\nu_1 - h\nu_2 = 23.6 - 11.8 = 11.8 eV.
AnswerAnswer: 11.8
Ask about this question
Q11

Physics, Question 11 (4 marks)

Thermodynamic processes · +4
An ideal monatomic gas of nn moles is taken through a cycle WXYZWWXYZW consisting of consecutive adiabatic and isobaric quasi-static processes, as shown in the schematic VV-TT diagram. The volume of the gas at W,XW, X and YY points are, 64 cm364\ \mathrm{cm^3}, 125 cm3125\ \mathrm{cm^3} and 250 cm3250\ \mathrm{cm^3}, respectively. If the absolute temperature of the gas TWT_W at the point WW is such that nRTW=1nRT_W = 1 J (RR is the universal gas constant), then the amount of heat absorbed (in J) by the gas along the path XYXY is ___ (The V-T diagram shows: W to X a curve along which V rises and T falls; X to Y a straight line whose extension passes through the origin; Y to Z a curve along which V falls and T rises; Z to W a straight line whose extension passes through the origin.)

Tests: Read processes from a V-T diagram and find heat absorbed in an isobaric step after an adiabatic one.

Show solution
  1. On a V-T diagram an isobar is a straight line through the origin (V ∝ T). So XY and ZW are isobaric, and WX and YZ are adiabatic.
  2. Adiabatic WX for a monatomic gas (γ=5/3\gamma = 5/3): TV2/3=TV^{2/3} = constant, so TX=TW(64125)2/3=TW(45)2=1625TWT_X = T_W\left(\dfrac{64}{125}\right)^{2/3} = T_W\left(\dfrac{4}{5}\right)^2 = \dfrac{16}{25}T_W. Hence nRTX=0.64nRT_X = 0.64 J.
  3. Isobaric XY: VV doubles (125 to 250 cm³), so TY=2TXT_Y = 2T_X and nR(TY−TX)=0.64nR(T_Y - T_X) = 0.64 J.
  4. Heat at constant pressure: Q=nCpΔT=52nRΔT=52(0.64)=1.6Q = nC_p\Delta T = \dfrac{5}{2}nR\Delta T = \dfrac{5}{2}(0.64) = 1.6 J.
AnswerAnswer: 1.6
Ask about this question
Q12

Physics, Question 12 (4 marks)

Satellite motion and relative angular velocity · +4
A geostationary satellite above the equator is orbiting around the earth at a fixed distance r1r_1 from the center of the earth. A second satellite is orbiting in the equatorial plane in the opposite direction to the earth's rotation, at a distance r2r_2 from the center of the earth, such that r1=1.21 r2r_1 = 1.21\,r_2. The time period of the second satellite as measured from the geostationary satellite is 24p\dfrac{24}{p} hours. The value of pp is ___

Tests: Combine Kepler's third law with relative angular velocity for counter-rotating satellites.

Show solution
  1. Geostationary: T1=24T_1 = 24 h. Kepler's third law: T2=T1(r2r1)3/2=24(1.21)3/2=241.331T_2 = T_1\left(\dfrac{r_2}{r_1}\right)^{3/2} = \dfrac{24}{(1.21)^{3/2}} = \dfrac{24}{1.331} h.

    Why: (1.21)1/2=1.1(1.21)^{1/2} = 1.1, so (1.21)3/2=1.331(1.21)^{3/2} = 1.331.

  2. The satellites move in opposite senses, so their relative angular speed is the sum: ωrel=ω1+ω2\omega_{\text{rel}} = \omega_1 + \omega_2.
  3. 1Trel=1T1+1T2=124+1.33124=2.33124\dfrac{1}{T_{\text{rel}}} = \dfrac{1}{T_1} + \dfrac{1}{T_2} = \dfrac{1}{24} + \dfrac{1.331}{24} = \dfrac{2.331}{24}.
  4. Trel=242.331T_{\text{rel}} = \dfrac{24}{2.331} h, so p=2.331≈2.33p = 2.331 \approx 2.33.
AnswerAnswer: 2.33
Ask about this question
Q13

Physics, Question 13 (4 marks)

Kinetic theory and equilibrium of a piston · +4
The left and right compartments of a thermally isolated container of length LL are separated by a thermally conducting, movable piston of area AA. The left and right compartments are filled with 32\dfrac{3}{2} and 1 moles of an ideal gas, respectively. In the left compartment the piston is attached by a spring with spring constant kk and natural length 2L5\dfrac{2L}{5}. In thermodynamic equilibrium, the piston is at a distance L2\dfrac{L}{2} from the left and right edges of the container as shown in the figure. Under the above conditions, if the pressure in the right compartment is P=kLAαP = \dfrac{kL}{A}\alpha, then the value of α\alpha is ___ (The figure shows the container of length LL with the piston at its middle; the spring runs from the left wall to the piston inside the left compartment, which has length L/2L/2.)

Tests: Balance gas pressures and a spring force on a piston, using equal temperatures across a conducting wall.

Show solution
  1. The piston conducts heat, so in equilibrium both gases are at the same temperature T. Both compartments have volume AL/2.
  2. P=nRTVP = \dfrac{nRT}{V} with equal VV and TT: Pleft=32Pright=32PP_{\text{left}} = \dfrac{3}{2}P_{\text{right}} = \dfrac{3}{2}P.
  3. The spring is stretched from 2L5\dfrac{2L}{5} to L2\dfrac{L}{2}, by L10\dfrac{L}{10}, so it pulls the piston towards the left wall with force kL10\dfrac{kL}{10}.
  4. Force balance on the piston: PleftA=PA+kL10⇒12PA=kL10⇒P=kL5AP_{\text{left}}A = PA + \dfrac{kL}{10} \Rightarrow \dfrac{1}{2}PA = \dfrac{kL}{10} \Rightarrow P = \dfrac{kL}{5A}.
  5. α=15=0.2\alpha = \dfrac{1}{5} = 0.2.
AnswerAnswer: 0.2
Ask about this question
Q14

Physics, Question 14 (4 marks)

Young's double slit experiment (fringe shift) · +4
In a Young's double slit experiment, a combination of two glass wedges AA and BB, having refractive indices 1.7 and 1.5, respectively, are placed in front of the slits, as shown in the figure. The separation between the slits is d=2d = 2 mm and the shortest distance between the slits and the screen is D=2D = 2 m. Thickness of the combination of the wedges is t=12 μt = 12\ \mum. The value of ll as shown in the figure is 1 mm. Neglect any refraction effect at the slanted interface of the wedges. Due to the combination of the wedges, the central maximum shifts (in mm) with respect to O by ___ (The figure shows the two wedges together forming a rectangular slab of uniform thickness tt just in front of the slits, with a diagonal interface: wedge A is full thickness tt at the top and thins to zero at the bottom, wedge B the reverse. The slab extends a distance ll above the upper slit and ll below the lower slit. O is the point on the screen opposite the midpoint of the slits.)

Tests: Find the shift of the central fringe when the slits are covered by slabs of different optical thickness.

Show solution
  1. Height of the slab: H=l+d+l=4H = l + d + l = 4 mm. At height yy above its bottom, A's thickness is t yHt\,\dfrac{y}{H} and B's is t(1−yH)t\left(1 - \dfrac{y}{H}\right).
  2. Upper slit (y=3y = 3 mm): A =9 μ= 9\ \mum, B =3 μ= 3\ \mum. Optical path =1.7(9)+1.5(3)=19.8 μ= 1.7(9) + 1.5(3) = 19.8\ \mum.
  3. Lower slit (y=1y = 1 mm): A =3 μ= 3\ \mum, B =9 μ= 9\ \mum. Optical path =1.7(3)+1.5(9)=18.6 μ= 1.7(3) + 1.5(9) = 18.6\ \mum.
  4. Extra optical path in front of the upper slit: Δ=1.2 μ\Delta = 1.2\ \mum. The central maximum moves towards that slit by Δ Dd\dfrac{\Delta\,D}{d}.

    Why: The central maximum sits where the geometric path difference cancels the extra optical path.

  5. Shift =1.2×10−6×22×10−3=1.2×10−3= \dfrac{1.2\times10^{-6} \times 2}{2\times10^{-3}} = 1.2\times10^{-3} m =1.2= 1.2 mm (upwards, towards the upper slit).
AnswerAnswer: 1.2
Ask about this question
Q15

Physics, Question 15 (4 marks)

Motion in a resistive medium · +4
A projectile of mass 200 g is launched in a viscous medium at an angle 60∘60^\circ with the horizontal, with an initial velocity of 270 m/s. It experiences a viscous drag force F⃗=−cv⃗\vec{F} = -c\vec{v} where the drag coefficient c=0.1c = 0.1 kg/s and v⃗\vec{v} is the instantaneous velocity of the projectile. The projectile hits a vertical wall after 2 s. Taking e=2.7e = 2.7, the horizontal distance of the wall from the point of projection (in m) is ___

Tests: Solve the horizontal motion of a projectile under linear drag with an exponential decay of velocity.

Show solution
  1. Horizontally only the drag acts: mdvxdt=−cvx⇒vx=uxe−t/τm\dfrac{dv_x}{dt} = -cv_x \Rightarrow v_x = u_x e^{-t/\tau} with τ=mc=0.20.1=2\tau = \dfrac{m}{c} = \dfrac{0.2}{0.1} = 2 s.

    Why: Gravity is vertical and the linear drag acts on each component separately.

  2. ux=270cos⁡60∘=135u_x = 270\cos 60^\circ = 135 m/s.
  3. x(t)=uxτ(1−e−t/τ)x(t) = u_x\tau\left(1 - e^{-t/\tau}\right), and at t=2t = 2 s: x=135×2×(1−1e)x = 135 \times 2 \times \left(1 - \dfrac{1}{e}\right).
  4. With e=2.7e = 2.7: x=270×1.72.7=170x = 270 \times \dfrac{1.7}{2.7} = 170 m.
AnswerAnswer: 170
Ask about this question
Q16

Physics, Question 16 (4 marks)

Doppler effect with oscillating source and observer · +4
An audio transmitter (T) and a receiver (R) are hung vertically from two identical massless strings of length 8 m with their pivots well separated along the XX axis. They are pulled from the equilibrium position in opposite directions along the XX axis by a small angular amplitude θ0=cos⁡−1(0.9)\theta_0 = \cos^{-1}(0.9) and released simultaneously. If the natural frequency of the transmitter is 660 Hz and the speed of sound in air is 330 m/s, the maximum variation in the frequency (in Hz) as measured by the receiver (Take the acceleration due to gravity g=10 m/s2g = 10\ \mathrm{m/s^2}) is ___ (The figure shows the two pendulums hanging from a horizontal ceiling, T on the left pulled to the left by θ0\theta_0 and R on the right pulled to the right by θ0\theta_0, with gg along −Y-Y.)

Tests: Find the largest change in received frequency when both source and observer oscillate as pendulums.

Show solution
  1. The pendulums are identical and released together in opposite directions, so they stay mirror images: always at the same height (line joining them along X) and moving towards or away from each other with equal speeds.
  2. Maximum speed at the lowest point: v=2gL(1−cos⁡θ0)=2×10×8×0.1=4v = \sqrt{2gL(1 - \cos\theta_0)} = \sqrt{2 \times 10 \times 8 \times 0.1} = 4 m/s.
  3. Approaching (both at the bottom, moving towards each other): fmax⁡=660×330+4330−4=660×334326≈676.20f_{\max} = 660 \times \dfrac{330 + 4}{330 - 4} = 660 \times \dfrac{334}{326} \approx 676.20 Hz.
  4. Receding half a period later: fmin⁡=660×330−4330+4=660×326334≈644.19f_{\min} = 660 \times \dfrac{330 - 4}{330 + 4} = 660 \times \dfrac{326}{334} \approx 644.19 Hz.
  5. Maximum variation =fmax⁡−fmin⁡≈32.01= f_{\max} - f_{\min} \approx 32.01 Hz. To first order this is 2f0⋅2vc=322f_0 \cdot \dfrac{2v}{c} = 32 Hz; the key accepts 26 to 33.
AnswerAnswer: 32.01
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Qualitative analysis (salt analysis) · +3 / −1
During sodium nitroprusside test of sulphide ion in an aqueous solution, one of the ligands coordinated to the metal ion is converted to
  1. (A)NOS−\mathrm{NOS^-}
  2. (B)SCN−\mathrm{SCN^-}
  3. (C)SNO−\mathrm{SNO^-}
  4. (D)NCS−\mathrm{NCS^-}

Tests: Know what forms in the sodium nitroprusside test for sulphide.

Show solution
  1. Sodium nitroprusside is Na2[Fe(CN)5NO]\mathrm{Na_2[Fe(CN)_5NO]}: five cyanide ligands and one nitrosyl ligand (as NO+\mathrm{NO^+}) on iron.
  2. In alkaline solution sulphide adds to the nitrosyl nitrogen: Na2[Fe(CN)5NO]+Na2S→Na4[Fe(CN)5NOS]\mathrm{Na_2[Fe(CN)_5NO] + Na_2S \rightarrow Na_4[Fe(CN)_5NOS]}, a violet/purple complex.

    Why: The S attacks the electrophilic N of the coordinated NO+.

  3. So the nitrosyl ligand NO+\mathrm{NO^+} becomes the thionitrosyl ligand NOS−\mathrm{NOS^-} (written in the order N, O, S); the cyanides are untouched.
  4. SCN−\mathrm{SCN^-} / NCS−\mathrm{NCS^-} would need the cyanide to change (that happens in the thiocyanate test with Fe3+\mathrm{Fe^{3+}}, not here), and SNO−\mathrm{SNO^-} is not the species formed.
AnswerAnswer: (A) NOS−\mathrm{NOS^-}
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Interhalogen compounds · +3 / −1
The complete hydrolysis of ICl, ClF3\mathrm{ClF_3} and BrF5\mathrm{BrF_5}, respectively, gives
  1. (A)IO−\mathrm{IO^-}, ClO2−\mathrm{ClO_2^-} and BrO3−\mathrm{BrO_3^-}
  2. (B)IO3−\mathrm{IO_3^-}, ClO2−\mathrm{ClO_2^-} and BrO3−\mathrm{BrO_3^-}
  3. (C)IO−\mathrm{IO^-}, ClO−\mathrm{ClO^-} and BrO2−\mathrm{BrO_2^-}
  4. (D)IO3−\mathrm{IO_3^-}, ClO4−\mathrm{ClO_4^-} and BrO2−\mathrm{BrO_2^-}

Tests: Predict hydrolysis products of interhalogens from oxidation states.

Show solution
  1. In an interhalogen the more electronegative halogen (F, or Cl in ICl) ends up as halide; the central, less electronegative halogen keeps its oxidation state and becomes an oxoacid/oxoanion.

    Why: Hydrolysis is not a redox reaction: water only swaps X for OH / O.

  2. ICl: I is +1. ICl+H2O→HOI+HCl\mathrm{ICl + H_2O \rightarrow HOI + HCl}, giving IO−\mathrm{IO^-} (I +1).
  3. ClF3\mathrm{ClF_3}: Cl is +3. ClF3+2H2O→HClO2+3HF\mathrm{ClF_3 + 2H_2O \rightarrow HClO_2 + 3HF}, giving ClO2−\mathrm{ClO_2^-} (Cl +3).
  4. BrF5\mathrm{BrF_5}: Br is +5. BrF5+3H2O→HBrO3+5HF\mathrm{BrF_5 + 3H_2O \rightarrow HBrO_3 + 5HF}, giving BrO3−\mathrm{BrO_3^-} (Br +5).
  5. The set is IO−\mathrm{IO^-}, ClO2−\mathrm{ClO_2^-}, BrO3−\mathrm{BrO_3^-}: option (A). Every other option changes an oxidation state.
AnswerAnswer: (A) IO−\mathrm{IO^-}, ClO2−\mathrm{ClO_2^-} and BrO3−\mathrm{BrO_3^-}
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Organic reaction sequences (carbonyl compounds) · +3 / −1
Monocyclic compounds P, Q, R and S are the major products formed in the reaction sequences given below. (The figure shows four sequences. (1) 3-Phenylpropanoic acid, C6H5CH2CH2COOH\mathrm{C_6H_5CH_2CH_2COOH}, treated with (i) Br2\mathrm{Br_2}/red phosphorus, (ii) H2O\mathrm{H_2O} gives P. (2) Benzaldehyde + acetaldehyde (CH3CHO\mathrm{CH_3CHO}) with aq. NaOH at 293 K gives Q. (3) Phenylacetylene (C6H5C≡CH\mathrm{C_6H_5C{\equiv}CH}) treated with (i) NaNH2\mathrm{NaNH_2}, then allyl bromide (CH2=CHCH2Br\mathrm{CH_2{=}CHCH_2Br}), (ii) Hg2+\mathrm{Hg^{2+}}, H3O+\mathrm{H_3O^+} gives R. (4) 2-Methyl-1H-indene (indene with a methyl group on C2, the C2=C3 double bond in the five-membered ring) treated with (i) O3\mathrm{O_3}, Zn-H2O\mathrm{H_2O}, (ii) CH3MgBr\mathrm{CH_3MgBr} (2 equiv.), (iii) H+\mathrm{H^+}, Δ\Delta gives S.) The product having the highest number of unsaturated carbon atom(s) is
  1. (A)P
  2. (B)Q
  3. (C)R
  4. (D)S

Tests: Track products through HVZ, aldol condensation, alkyne alkylation/hydration and ozonolysis–Grignard–dehydration.

Show solution
  1. P (HVZ reaction): α\alpha-bromination of the acid gives 2-bromo-3-phenylpropanoic acid, C6H5CH2CHBrCOOH\mathrm{C_6H_5CH_2CHBrCOOH}. Unsaturated C: 6 (ring) + 1 (COOH) = 7.
  2. Q (Claisen–Schmidt / crossed aldol): the enolate of CH3CHO\mathrm{CH_3CHO} adds to PhCHO and the aldol dehydrates into conjugation: cinnamaldehyde, C6H5CH=CHCHO\mathrm{C_6H_5CH{=}CHCHO}. Unsaturated C: 6 + 2 + 1 = 9.

    Why: Even if it stopped at the aldol PhCH(OH)CH2CHO (7), the ranking below would not change.

  3. R: NaNH2\mathrm{NaNH_2} makes the acetylide, which is allylated: C6H5C≡CCH2CH=CH2\mathrm{C_6H_5C{\equiv}CCH_2CH{=}CH_2}. Hg2+/H3O+\mathrm{Hg^{2+}/H_3O^+} hydrates the alkyne (C=C untouched) to the ketone, 1-phenylpent-4-en-1-one, C6H5COCH2CH2CH=CH2\mathrm{C_6H_5COCH_2CH_2CH{=}CH_2}. Unsaturated C: 6 + 1 + 2 = 9.
  4. S: ozonolysis opens the five-membered ring at C2=C3: 2-(2-oxopropyl)benzaldehyde, o-OHC-C6H4-CH2COCH3\mathrm{o\text{-}OHC\text{-}C_6H_4\text{-}CH_2COCH_3}. Two equivalents of CH3MgBr\mathrm{CH_3MgBr} turn the CHO into CH(OH)CH3\mathrm{CH(OH)CH_3} and the ketone into CH2C(OH)(CH3)2\mathrm{CH_2C(OH)(CH_3)_2}.
  5. H+\mathrm{H^+}, Δ\Delta dehydrates both alcohols into conjugation with the ring: 1-ethenyl-2-(2-methylprop-1-en-1-yl)benzene, o-CH2=CH-C6H4-CH=C(CH3)2\mathrm{o\text{-}CH_2{=}CH\text{-}C_6H_4\text{-}CH{=}C(CH_3)_2} (monocyclic, as stated). Unsaturated C: 6 + 2 + 2 = 10.
  6. Counts: P 7, Q 9, R 9, S 10. S has the most unsaturated carbons.
AnswerAnswer: (D) S
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Carboxylic acids (preparation) · +3 / −1
The correct reaction/reaction sequence that would produce a dicarboxylic acid as the major product is
  1. (A)2-Chloroethanol, HOCH2CH2Cl\mathrm{HOCH_2CH_2Cl}, treated with (i) NaCN, (ii) HO−\mathrm{HO^-}, H2O\mathrm{H_2O}, (iii) H3O+\mathrm{H_3O^+}
  2. (B)Glucose, OHC(CHOH)4CH2OH\mathrm{OHC(CHOH)_4CH_2OH}, treated with Br2\mathrm{Br_2}, H2O\mathrm{H_2O}
  3. (C)Bromocyclohexane treated with (i) KOH, EtOH, (ii) KMnO4\mathrm{KMnO_4}, H2SO4\mathrm{H_2SO_4}, Δ\Delta
  4. (D)1-Hydroxy-2,4-dimethylpentan-3-one, (CH3)2CHCOCH(CH3)CH2OH\mathrm{(CH_3)_2CHCOCH(CH_3)CH_2OH}, treated with H2CrO4\mathrm{H_2CrO_4}

Tests: Recognise which oxidations or nitrile hydrolyses give one COOH and which give two.

Show solution
  1. (A): SN2\mathrm{S_N2} by cyanide gives HOCH2CH2CN\mathrm{HOCH_2CH_2CN}; hydrolysis and acidification give 3-hydroxypropanoic acid, HOCH2CH2COOH\mathrm{HOCH_2CH_2COOH}: one COOH. Not dicarboxylic.
  2. (B): bromine water is a mild oxidant that oxidises only the aldehyde group: gluconic acid, HOOC(CHOH)4CH2OH\mathrm{HOOC(CHOH)_4CH_2OH}: one COOH.

    Why: The CH2OH end is oxidised too only by a strong oxidant like HNO3 (glucaric/saccharic acid).

  3. (C): alcoholic KOH eliminates HBr to give cyclohexene; hot acidic KMnO4\mathrm{KMnO_4} cleaves the C=C, each CH becoming COOH: hexanedioic (adipic) acid, HOOC(CH2)4COOH\mathrm{HOOC(CH_2)_4COOH}. Dicarboxylic.
  4. (D): chromic acid oxidises the primary alcohol to COOH; the ketone stays: 2,4-dimethyl-3-oxopentanoic acid, (CH3)2CHCOCH(CH3)COOH\mathrm{(CH_3)_2CHCOCH(CH_3)COOH}, a β\beta-keto acid with one COOH.
AnswerAnswer: (C) hexanedioic (adipic) acid
Ask about this question

Chemistry, Section 2: 4 questions, one or more options correct: +4 if all correct options and nothing else are chosen; partial +3 / +2 / +1 for choosing only three / two / one correct options (when more are correct and no wrong one is chosen); 0 if unanswered; −2 in all other cases

Q5

Chemistry, Question 5 (4 marks)

Intermolecular forces · +4 / −2
The correct statement(s) about intermolecular forces is(are)
  1. (A)The potential energy between two point charges approaches zero more rapidly than the potential energy between a point dipole and a point charge as the distance between them approaches infinity.
  2. (B)The average potential energy of two rotating polar molecules that are separated by a distance rr has 1/r31/r^3 dependence.
  3. (C)The dipole-induced dipole average interaction energy is independent of temperature.
  4. (D)Nonpolar molecules attract one another even though neither has a permanent dipole moment.

Tests: Know how each type of intermolecular interaction depends on distance and temperature.

Show solution
  1. (A) False. Charge–charge: V∝1/rV \propto 1/r. Charge–dipole: V∝1/r2V \propto 1/r^2. The charge–dipole energy falls off faster, not the charge–charge one.
  2. (B) False. For two freely rotating dipoles the Boltzmann-weighted average (Keesom energy) is ⟨V⟩=−2μ12μ223(4πε0)2kT r6\langle V \rangle = -\dfrac{2\mu_1^2\mu_2^2}{3(4\pi\varepsilon_0)^2 kT\, r^6}, a 1/r61/r^6 dependence. 1/r31/r^3 is for two fixed (non-rotating) dipoles.
  3. (C) True. The induced dipole always follows the permanent one, so no thermal averaging is involved: V=−μ12α2′πε0r6V = -\dfrac{\mu_1^2\alpha_2'}{\pi\varepsilon_0 r^6}, with no TT in it.

    Why: Only the rotating dipole–dipole average carries 1/T.

  4. (D) True. London (dispersion) forces: instantaneous dipoles in one molecule induce dipoles in a neighbour, so even nonpolar molecules (He, CH4) attract.
AnswerAnswer: (C), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

Oxoacids of phosphorus · +4 / −2
The compound(s) with P–H bond(s) is(are)
  1. (A)H3PO4\mathrm{H_3PO_4}
  2. (B)H3PO3\mathrm{H_3PO_3}
  3. (C)H4P2O7\mathrm{H_4P_2O_7}
  4. (D)H3PO2\mathrm{H_3PO_2}

Tests: Draw the structures of phosphorus oxoacids and spot P–H bonds.

Show solution
  1. Every phosphorus oxoacid has P in a tetrahedron with one P=O; the remaining groups are OH (acidic H) or H directly on P (non-acidic, reducing).
  2. (A) H3PO4\mathrm{H_3PO_4}: O=P(OH)3\mathrm{O{=}P(OH)_3}, tribasic, no P–H. False.
  3. (B) H3PO3\mathrm{H_3PO_3} (phosphonic acid): O=PH(OH)2\mathrm{O{=}PH(OH)_2}, dibasic, one P–H. True.
  4. (C) H4P2O7\mathrm{H_4P_2O_7} (pyrophosphoric acid): (HO)2P(O)-O-P(O)(OH)2\mathrm{(HO)_2P(O)\text{-}O\text{-}P(O)(OH)_2}, four OH, no P–H. False.
  5. (D) H3PO2\mathrm{H_3PO_2} (phosphinic acid): O=PH2(OH)\mathrm{O{=}PH_2(OH)}, monobasic, two P–H. True.
AnswerAnswer: (B), (D)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

Amines (Gabriel phthalimide synthesis) · +4 / −2
For the reaction sequence given below, the correct statement(s) is(are). (The figure shows tetralin, 1,2,3,4-tetrahydronaphthalene, treated with (i) KMnO4\mathrm{KMnO_4}, H+\mathrm{H^+}, Δ\Delta, (ii) NH3\mathrm{NH_3}, Δ\Delta, −2H2O-2\mathrm{H_2O} to give X; X treated with (i) strong heating, (ii) ethanolic KOH, (iii) R-Br to give Y; Y with NaOH gives an aromatic compound + Z.)
  1. (A)Both X and Y are oxygen containing compounds.
  2. (B)Y on heating with CHCl3\mathrm{CHCl_3}/KOH forms isocyanide.
  3. (C)Z reacts with Hinsberg’s reagent.
  4. (D)Z is an aromatic primary amine.

Tests: Run the Gabriel phthalimide synthesis from tetralin and classify each product.

Show solution
  1. Hot acidic KMnO4 oxidises both benzylic CH2 groups of the saturated ring and cleaves it; the benzene ring survives: phthalic acid (benzene-1,2-dicarboxylic acid).
  2. With NH3\mathrm{NH_3} and heat, the ammonium salt loses water; the strong heating step completes ring closure to phthalimide. So X is phthalamide/phthalimide, C6H4(CO)2NH\mathrm{C_6H_4(CO)_2NH} after heating: it contains oxygen.
  3. Gabriel synthesis: ethanolic KOH gives potassium phthalimide, which R-Br alkylates: Y = N-alkylphthalimide, C6H4(CO)2NR\mathrm{C_6H_4(CO)_2NR} (contains oxygen). So (A) is true.
  4. NaOH hydrolyses Y to sodium phthalate (the aromatic compound) and Z = R-NH2\mathrm{R\text{-}NH_2}, a primary aliphatic amine.
  5. (B) False: Y has no N–H at all (the N carries two acyl groups and R), so it cannot give the carbylamine (isocyanide) test, which needs a primary amine.
  6. (C) True: a primary amine reacts with Hinsberg’s reagent (benzenesulphonyl chloride) to give an alkali-soluble sulphonamide. (D) False: R comes from an alkyl bromide, so Z is aliphatic.
AnswerAnswer: (A), (C)
Ask about this question
Q8

Chemistry, Question 8 (4 marks)

Alcohols, carboxylic acids and stereochemistry · +4 / −2
For the reaction sequence given below, the correct statement(s) is(are). (The figure shows a single enantiomer of 4-phenyltetrahydropyran-2-one (a six-membered lactone, δ\delta-valerolactone with Ph on the ring carbon C4, drawn with a wedge bond) reduced by LiAlH4\mathrm{LiAlH_4} to P. P with CrO3\mathrm{CrO_3}-H2SO4\mathrm{H_2SO_4} gives Q, and Q with NaOH and CaO, Δ\Delta gives R. P with H2SO4\mathrm{H_2SO_4}, 443 K gives S.)
  1. (A)P is optically active.
  2. (B)S gives Bayer’s test.
  3. (C)Q gives effervescence with aq. NaHCO3\mathrm{NaHCO_3}.
  4. (D)R is an alkyne.

Tests: Follow a lactone through reduction, oxidation, decarboxylation and dehydration, and spot loss of chirality.

Show solution
  1. LiAlH4\mathrm{LiAlH_4} reduces the lactone (ester) to two primary alcohols: P = 3-phenylpentane-1,5-diol, HOCH2CH2CH(C6H5)CH2CH2OH\mathrm{HOCH_2CH_2CH(C_6H_5)CH_2CH_2OH}.
  2. (A) False. C3 of P carries H, Ph and two identical CH2CH2OH\mathrm{CH_2CH_2OH} arms, so it is no longer a stereocentre; P has a mirror plane and is optically inactive.

    Why: The ring O and the C=O made the two arms different in the lactone; reduction makes them the same.

  3. Jones oxidation (CrO3\mathrm{CrO_3}-H2SO4\mathrm{H_2SO_4}) takes both primary alcohols to COOH: Q = 3-phenylpentanedioic (3-phenylglutaric) acid. (C) True: a carboxylic acid releases CO2\mathrm{CO_2} with NaHCO3\mathrm{NaHCO_3}.
  4. Soda lime removes both COOH groups as CO2\mathrm{CO_2}: R = CH3CH(C6H5)CH3\mathrm{CH_3CH(C_6H_5)CH_3}, isopropylbenzene (cumene). (D) False: R is an alkylbenzene, not an alkyne.
  5. Conc. H2SO4\mathrm{H_2SO_4} at 443 K dehydrates both alcohol groups: S is a phenyl-substituted pentadiene (3-phenylpenta-1,4-diene and its conjugated isomers). (B) True: its C=C bonds decolourise cold alkaline KMnO4\mathrm{KMnO_4} (Baeyer’s reagent).
AnswerAnswer: (B), (C)
Ask about this question

Chemistry, Section 3: 8 questions, numerical value (truncate/round off to two decimal places): +4 if correct, 0 in all other cases

Q9

Chemistry, Question 9 (4 marks)

Solid state (unit cell density) · +4
The density (in g cm−3\mathrm{g\,cm^{-3}}) of the metal which forms a cubic close packed (ccp) lattice with an axial distance (edge length) equal to 400 pm is ______. Use: Atomic mass of metal = 105.6 amu and Avogadro’s constant = 6×1023 mol−16 \times 10^{23}\ \mathrm{mol^{-1}}

Tests: Use ρ = ZM/(N_A a³) for an fcc lattice.

Show solution
  1. ccp = fcc: Z=4Z = 4 atoms per unit cell.
  2. a=400 pm=4×10−8 cma = 400\ \text{pm} = 4 \times 10^{-8}\ \text{cm}, so a3=64×10−24=6.4×10−23 cm3a^3 = 64 \times 10^{-24} = 6.4 \times 10^{-23}\ \mathrm{cm^3}.
  3. ρ=ZMNAa3=4×105.66×1023×6.4×10−23=422.438.4\rho = \dfrac{Z M}{N_A a^3} = \dfrac{4 \times 105.6}{6 \times 10^{23} \times 6.4 \times 10^{-23}} = \dfrac{422.4}{38.4}
  4. ρ=11.0 g cm−3\rho = 11.0\ \mathrm{g\,cm^{-3}}
AnswerAnswer: 11.00 g cm−3\mathrm{g\,cm^{-3}}
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Ionic equilibrium (solubility product, common ion) · +4
The solubility of barium iodate in an aqueous solution prepared by mixing 200 mL of 0.010 M barium nitrate with 100 mL of 0.10 M sodium iodate is X×10−6 mol dm−3X \times 10^{-6}\ \mathrm{mol\,dm^{-3}}. The value of XX is ______. Use: Solubility product constant (KspK_{sp}) of barium iodate = 1.58×10−91.58 \times 10^{-9}

Tests: Find solubility with a common ion left over after precipitation.

Show solution
  1. Moles: Ba2+\mathrm{Ba^{2+}} = 0.200×0.010=20.200 \times 0.010 = 2 mmol; IO3−\mathrm{IO_3^-} = 0.100×0.10=100.100 \times 0.10 = 10 mmol; total volume 300 mL.
  2. Ba2++2IO3−→Ba(IO3)2\mathrm{Ba^{2+} + 2IO_3^- \rightarrow Ba(IO_3)_2}: 2 mmol Ba2+\mathrm{Ba^{2+}} uses 4 mmol IO3−\mathrm{IO_3^-}, leaving 6 mmol IO3−\mathrm{IO_3^-} in 300 mL: [IO3−]=0.020[\mathrm{IO_3^-}] = 0.020 M.

    Why: Almost all Ba2+ precipitates since Q far exceeds Ksp.

  3. Solubility ss of the precipitate in this solution: Ksp=s(0.020+2s)2≈s(0.020)2K_{sp} = s(0.020 + 2s)^2 \approx s(0.020)^2.
  4. s=1.58×10−94×10−4=3.95×10−6 mol dm−3s = \dfrac{1.58 \times 10^{-9}}{4 \times 10^{-4}} = 3.95 \times 10^{-6}\ \mathrm{mol\,dm^{-3}} (2s≪0.0202s \ll 0.020, so the approximation holds).
AnswerAnswer: 3.95
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Surface chemistry (Freundlich isotherm) · +4
Adsorption of phenol from its aqueous solution on to fly ash obeys Freundlich isotherm. At a given temperature, from 10 mg g−1\mathrm{mg\,g^{-1}} and 16 mg g−1\mathrm{mg\,g^{-1}} aqueous phenol solutions, the concentrations of adsorbed phenol are measured to be 4 mg g−1\mathrm{mg\,g^{-1}} and 10 mg g−1\mathrm{mg\,g^{-1}}, respectively. At this temperature, the concentration (in mg g−1\mathrm{mg\,g^{-1}}) of adsorbed phenol from 20 mg g−1\mathrm{mg\,g^{-1}} aqueous solution of phenol will be ______. Use: log⁡102=0.3\log_{10} 2 = 0.3

Tests: Find the Freundlich constants from two data points and predict a third.

Show solution
  1. Freundlich: xm=kC1/n\dfrac{x}{m} = k C^{1/n}.
  2. Divide the two data points: 104=(1610)1/n\dfrac{10}{4} = \left(\dfrac{16}{10}\right)^{1/n}, i.e. 2.5=1.61/n2.5 = 1.6^{1/n}.
  3. Logs: log⁡2.5=1−2log⁡2=0.4\log 2.5 = 1 - 2\log 2 = 0.4; log⁡1.6=4log⁡2−1=0.2\log 1.6 = 4\log 2 - 1 = 0.2. So 1n=0.40.2=2\dfrac{1}{n} = \dfrac{0.4}{0.2} = 2.
  4. k=4102=0.04k = \dfrac{4}{10^2} = 0.04. At C=20C = 20: xm=0.04×202=16 mg g−1\dfrac{x}{m} = 0.04 \times 20^2 = 16\ \mathrm{mg\,g^{-1}}.
AnswerAnswer: 16.00 mg g−1\mathrm{mg\,g^{-1}}
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Chemical kinetics (pseudo first order) · +4
Consider a reaction A+R→ProductA + R \rightarrow \text{Product}. The rate of this reaction is measured to be k[A][R]k[A][R]. At the start of the reaction, the concentration of RR, [R]0[R]_0, is 10-times the concentration of AA, [A]0[A]_0. The reaction can be considered to be a pseudo first order reaction with assumption that k[R]=k′k[R] = k' is constant. Due to this assumption, the relative error (in %) in the rate when this reaction is 40 % complete, is ______. [kk and k′k' represent corresponding rate constants]

Tests: Quantify the error in treating a second-order reaction as pseudo first order.

Show solution
  1. At 40 % completion: [A]=0.6[A]0[A] = 0.6[A]_0; R is used 1 : 1, so [R]=10[A]0−0.4[A]0=9.6[A]0[R] = 10[A]_0 - 0.4[A]_0 = 9.6[A]_0.
  2. True rate: k[A][R]=k(0.6[A]0)(9.6[A]0)=5.76 k[A]02k[A][R] = k(0.6[A]_0)(9.6[A]_0) = 5.76\,k[A]_0^2.
  3. Pseudo-first-order rate: k′[A]=k[R]0[A]=k(10[A]0)(0.6[A]0)=6.00 k[A]02k'[A] = k[R]_0[A] = k(10[A]_0)(0.6[A]_0) = 6.00\,k[A]_0^2.
  4. Relative error =6.00−5.765.76×100=0.49.6×100=4.17 %= \dfrac{6.00 - 5.76}{5.76} \times 100 = \dfrac{0.4}{9.6} \times 100 = 4.17\ \%.
  5. The key's range [4 to 4.25] also accepts 4.00 %, the same error taken relative to the assumed rate (0.24/6.000.24/6.00).
AnswerAnswer: 4.17 (%)
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Solutions (osmotic pressure) · +4
At 300 K, an ideal dilute solution of a macromolecule exerts osmotic pressure that is expressed in terms of the height (h) of the solution (density = 1.00 g cm−31.00\ \mathrm{g\,cm^{-3}}) where h is equal to 2.00 cm. If the concentration of the dilute solution of the macromolecule is 2.00 g dm−32.00\ \mathrm{g\,dm^{-3}}, the molar mass of the macromolecule is calculated to be X×104 g mol−1X \times 10^4\ \mathrm{g\,mol^{-1}}. The value of XX is ______. Use: Universal gas constant (R) = 8.3 J K−1 mol−18.3\ \mathrm{J\,K^{-1}\,mol^{-1}} and acceleration due to gravity (gg) = 10 m s−210\ \mathrm{m\,s^{-2}}

Tests: Get molar mass of a polymer from osmotic pressure measured as a liquid height.

Show solution
  1. Osmotic pressure as a column of solution: π=hρg=0.0200 m×1000 kg m−3×10 m s−2=200 Pa\pi = h\rho g = 0.0200\ \text{m} \times 1000\ \mathrm{kg\,m^{-3}} \times 10\ \mathrm{m\,s^{-2}} = 200\ \text{Pa}.
  2. π=cRT⇒c=2008.3×300=0.0803 mol m−3\pi = cRT \Rightarrow c = \dfrac{200}{8.3 \times 300} = 0.0803\ \mathrm{mol\,m^{-3}}.

    Why: In SI units c comes out in mol per m³.

  3. Mass concentration: 2.00 g dm−3=2000 g m−32.00\ \mathrm{g\,dm^{-3}} = 2000\ \mathrm{g\,m^{-3}}.
  4. M=20000.0803=2000×2490200=2.49×104 g mol−1M = \dfrac{2000}{0.0803} = \dfrac{2000 \times 2490}{200} = 2.49 \times 10^4\ \mathrm{g\,mol^{-1}}, so X=2.49X = 2.49.
AnswerAnswer: 2.49
Ask about this question
Q14

Chemistry, Question 14 (4 marks)

Electrochemistry and thermodynamics (fuel cell) · +4
An electrochemical cell is fueled by the combustion of butane at 1 bar and 298 K. Its cell potential is XF×103\dfrac{X}{F} \times 10^3 volts, where FF is the Faraday constant. The value of XX is ______. Use: Standard Gibbs energies of formation at 298 K are: ΔfGCO2∘=−394 kJ mol−1\Delta_f G^\circ_{\mathrm{CO_2}} = -394\ \mathrm{kJ\,mol^{-1}}; ΔfGwater∘=−237 kJ mol−1\Delta_f G^\circ_{\text{water}} = -237\ \mathrm{kJ\,mol^{-1}}; ΔfGbutane∘=−18 kJ mol−1\Delta_f G^\circ_{\text{butane}} = -18\ \mathrm{kJ\,mol^{-1}}

Tests: Get a fuel cell's EMF from ΔG and the electrons transferred.

Show solution
  1. C4H10+132O2→4CO2+5H2O\mathrm{C_4H_{10} + \tfrac{13}{2}O_2 \rightarrow 4CO_2 + 5H_2O}
  2. ΔrG∘=4(−394)+5(−237)−(−18)−0=−1576−1185+18=−2743 kJ mol−1\Delta_r G^\circ = 4(-394) + 5(-237) - (-18) - 0 = -1576 - 1185 + 18 = -2743\ \mathrm{kJ\,mol^{-1}}.
  3. Electrons: C goes from −52-\tfrac{5}{2} in butane to +4 in CO2\mathrm{CO_2}, a change of 6.5 per C, so n=4×6.5=26n = 4 \times 6.5 = 26 (check: 132O2\tfrac{13}{2}\mathrm{O_2} take 13×2=2613 \times 2 = 26 e).
  4. E∘=−ΔrG∘nF=2743×10326F=105.5F×103E^\circ = -\dfrac{\Delta_r G^\circ}{nF} = \dfrac{2743 \times 10^3}{26F} = \dfrac{105.5}{F} \times 10^3 V.
AnswerAnswer: 105.50
Ask about this question
Q15

Chemistry, Question 15 (4 marks)

Coordination compounds (crystal field theory) · +4
The sum of the spin only magnetic moment values (in B.M.) of [Mn(Br)6]3−\mathrm{[Mn(Br)_6]^{3-}} and [Mn(CN)6]3−\mathrm{[Mn(CN)_6]^{3-}} is ______.

Tests: Use ligand field strength to find unpaired electrons and spin-only moments.

Show solution
  1. Both complexes have Mn3+\mathrm{Mn^{3+}} (x−6=−3x - 6 = -3 with Br⁻ or CN⁻): 3d4\mathrm{3d^4}.
  2. Br−\mathrm{Br^-} is a weak-field ligand: high spin t2g3eg1t_{2g}^3 e_g^1, 4 unpaired electrons, μ=4×6=24=4.90\mu = \sqrt{4 \times 6} = \sqrt{24} = 4.90 B.M.
  3. CN−\mathrm{CN^-} is a strong-field ligand: low spin t2g4t_{2g}^4, 2 unpaired electrons, μ=2×4=8=2.83\mu = \sqrt{2 \times 4} = \sqrt{8} = 2.83 B.M.
  4. Sum =4.90+2.83=7.73= 4.90 + 2.83 = 7.73 B.M.
AnswerAnswer: 7.73 B.M.
Ask about this question
Q16

Chemistry, Question 16 (4 marks)

Biomolecules (carbohydrates) · +4
A linear octasaccharide (molar mass = 1024 g mol−1\mathrm{g\,mol^{-1}}) on complete hydrolysis produces three monosaccharides: ribose, 2-deoxyribose and glucose. The amount of 2-deoxyribose formed is 58.26 % (w/w) of the total amount of the monosaccharides produced in the hydrolyzed products. The number of ribose unit(s) present in one molecule of octasaccharide is ______. Use: Molar mass (in g mol−1\mathrm{g\,mol^{-1}}): ribose = 150, 2-deoxyribose = 134, glucose = 180; Atomic mass (in amu): H = 1, O = 16

Tests: Use water added on hydrolysis and mass balance to count sugar units.

Show solution
  1. A linear chain of 8 units has 7 glycosidic links; complete hydrolysis adds 7 H2O\mathrm{H_2O}: mass of monosaccharides =1024+7×18=1150= 1024 + 7 \times 18 = 1150 g per mole of octasaccharide.
  2. 2-Deoxyribose: 0.5826×1150=6700.5826 \times 1150 = 670 g =670/134=5= 670/134 = 5 units.
  3. The other 3 units weigh 1150−670=4801150 - 670 = 480 g. With aa ribose and bb glucose: a+b=3a + b = 3 and 150a+180b=480150a + 180b = 480.
  4. 150a+180(3−a)=480⇒30a=60⇒a=2150a + 180(3 - a) = 480 \Rightarrow 30a = 60 \Rightarrow a = 2, b=1b = 1.
AnswerAnswer: 2
Ask about this question

Questions are quoted from JEE (Advanced) 2025 Paper 2 (English); figures are described in words. Every final answer is checked against the official final answer key. Where the official key accepts more than one answer, or gave every candidate full marks, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.