AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2026 Paper 1: Question Paper with Solutions and Answer Key

All 48 questions of JEE Advanced 2026 Paper 1 solved step by step: Mathematics, Physics and Chemistry, with the official provisional answer key and the marking of each section. Every final answer is checked against the official provisional answer key.

JEE (Advanced) 2026 Paper 1: 48 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2026: Paper 2.

Mathematics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Mathematics, Question 1 (3 marks)

Application of derivatives (monotonicity, extrema) · +3 / −1
Consider the function f:(0,∞)→(−∞,∞)f: (0, \infty) \rightarrow (-\infty, \infty) given by f(x)=x log⁡e(x)−x+1f(x) = \sqrt{x}\,\log_e(x) - x + 1. Then which one of the following statements is TRUE?
  1. (A)The derivative of the function ff is decreasing in the interval (0,1)(0, 1)
  2. (B)The function ff has a local maximum at some point a∈(0,∞)a \in (0, \infty)
  3. (C)The function ff has a local minimum at some point b∈(0,∞)b \in (0, \infty)
  4. (D)The function ff has NEITHER a point of local maximum NOR a point of local minimum in the interval (0,∞)(0, \infty)

Tests: Find the sign of f′ by studying an auxiliary function, and check whether a stationary point is an extremum.

Show solution
  1. f′(x)=ln⁡x2x+xx−1=ln⁡x+2−2x2xf'(x) = \dfrac{\ln x}{2\sqrt{x}} + \dfrac{\sqrt{x}}{x} - 1 = \dfrac{\ln x + 2 - 2\sqrt{x}}{2\sqrt{x}}.
  2. Let g(x)=ln⁡x+2−2xg(x) = \ln x + 2 - 2\sqrt{x}. Then g′(x)=1x−1x=1−xxg'(x) = \dfrac{1}{x} - \dfrac{1}{\sqrt{x}} = \dfrac{1 - \sqrt{x}}{x}: positive on (0,1)(0, 1), negative on (1,∞)(1, \infty). So gg has its maximum at x=1x = 1, where g(1)=0+2−2=0g(1) = 0 + 2 - 2 = 0.
  3. Hence g(x)≤0g(x) \le 0 for all x>0x > 0, with equality only at x=1x = 1. So f′(x)≤0f'(x) \le 0 and ff is strictly decreasing on (0,∞)(0, \infty).

    Why: f′ vanishes at one point only, so f does not stop decreasing there.

  4. At x=1x = 1, f′f' is 0 but does not change sign (negative on both sides): no local maximum or minimum anywhere. (B) and (C) are false, (D) is true.
  5. (A) Differentiate f′(x)=ln⁡x2x+x−1/2−1f'(x) = \dfrac{\ln x}{2\sqrt{x}} + x^{-1/2} - 1: f′′(x)=2−ln⁡x4x3/2−12x3/2=−ln⁡x4x3/2f''(x) = \dfrac{2 - \ln x}{4x^{3/2}} - \dfrac{1}{2x^{3/2}} = -\dfrac{\ln x}{4x^{3/2}}. On (0,1)(0, 1), ln⁡x<0\ln x < 0, so f′′>0f'' > 0: f′f' is increasing there. (A) is false.
AnswerAnswer: (D) ff has neither a local maximum nor a local minimum
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Conic sections (tangents, circle through three points) · +3 / −1
Let PP be the point on the parabola y=x2y = x^2 such that the slope of the tangent to the parabola at the point PP is 4. Let QQ be the point in the first quadrant lying on the circle x2+y2=2x^2 + y^2 = 2 such that the slope of the tangent to the circle at the point QQ is −1-1. Let RR be the point in the first quadrant lying on the ellipse x2+4y2=8x^2 + 4y^2 = 8 such that the slope of the tangent to the ellipse at the point RR is −12-\dfrac{1}{2}. Then the radius of the circle passing through the points PP, QQ and RR is
  1. (A)10\sqrt{10}
  2. (B)5\sqrt{5}
  3. (C)52\sqrt{\dfrac{5}{2}}
  4. (D)252\sqrt{5}

Tests: Locate points from tangent slopes and use the right angle to get the circumradius quickly.

Show solution
  1. Parabola: dydx=2x=4\dfrac{dy}{dx} = 2x = 4, so x=2x = 2 and P=(2,4)P = (2, 4).
  2. Circle: dydx=−xy=−1\dfrac{dy}{dx} = -\dfrac{x}{y} = -1, so x=yx = y; with x2+y2=2x^2 + y^2 = 2 in the first quadrant, Q=(1,1)Q = (1, 1).
  3. Ellipse: 2x+8ydydx=02x + 8y\dfrac{dy}{dx} = 0, so dydx=−x4y=−12\dfrac{dy}{dx} = -\dfrac{x}{4y} = -\dfrac{1}{2}, giving x=2yx = 2y. Then 4y2+4y2=84y^2 + 4y^2 = 8, y=1y = 1: R=(2,1)R = (2, 1).
  4. QRQR is horizontal (y=1y = 1) and PRPR is vertical (x=2x = 2), so ∠PRQ=90∘\angle PRQ = 90^\circ.

    Why: An angle in a semicircle is a right angle, so the hypotenuse is a diameter.

  5. So PQPQ is a diameter: PQ=(2−1)2+(4−1)2=10PQ = \sqrt{(2-1)^2 + (4-1)^2} = \sqrt{10}, and the radius is 102=52\dfrac{\sqrt{10}}{2} = \sqrt{\dfrac{5}{2}}.
AnswerAnswer: (C) 52\sqrt{\dfrac{5}{2}}
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Matrices (elementary operations, invertibility) · +3 / −1
Which one of the following matrices can be obtained by performing elementary row transformations on the 3×33 \times 3 identity matrix?
  1. (A)[111111111]\begin{bmatrix} 1 & 1 & 1 \\ 1 & 1 & 1 \\ 1 & 1 & 1 \end{bmatrix}
  2. (B)[111234121]\begin{bmatrix} 1 & 1 & 1 \\ 2 & 3 & 4 \\ 1 & 2 & 1 \end{bmatrix}
  3. (C)[111234258]\begin{bmatrix} 1 & 1 & 1 \\ 2 & 3 & 4 \\ 2 & 5 & 8 \end{bmatrix}
  4. (D)[111−112023]\begin{bmatrix} 1 & 1 & 1 \\ -1 & 1 & 2 \\ 0 & 2 & 3 \end{bmatrix}

Tests: Know that row operations on I give exactly the invertible matrices, and test each option by its determinant.

Show solution
  1. Each elementary row operation multiplies the determinant by a nonzero number (swap: −1-1, scaling by k≠0k \ne 0: kk, adding a multiple of a row: 1). Starting from det⁡I=1\det I = 1, the result is always invertible.

    Why: Conversely every invertible matrix is a product of elementary matrices, so it can be reached.

  2. (A) All rows equal: determinant 0. Not reachable.
  3. (B) 1(3−8)−1(2−4)+1(4−3)=−5+2+1=−2≠01(3 - 8) - 1(2 - 4) + 1(4 - 3) = -5 + 2 + 1 = -2 \ne 0. Invertible, so reachable.
  4. (C) 1(24−20)−1(16−8)+1(10−6)=4−8+4=01(24 - 20) - 1(16 - 8) + 1(10 - 6) = 4 - 8 + 4 = 0. Not reachable.
  5. (D) 1(3−4)−1(−3−0)+1(−2−0)=−1+3−2=01(3 - 4) - 1(-3 - 0) + 1(-2 - 0) = -1 + 3 - 2 = 0 (row 3 = row 1 + row 2). Not reachable.
AnswerAnswer: (B) the matrix with rows (1,1,1)(1, 1, 1), (2,3,4)(2, 3, 4), (1,2,1)(1, 2, 1)
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Inverse trigonometric functions · +3 / −1
Considering only the principal values of the inverse trigonometric functions, the value of cot⁡−1(cot⁡(−11))+10sin⁡(2cos⁡−1(12))+10sin⁡(2tan⁡−1(2))\cot^{-1}(\cot(-11)) + 10\sin\left(2\cos^{-1}\left(\dfrac{1}{\sqrt{2}}\right)\right) + 10\sin(2\tan^{-1}(2)) is
  1. (A)3π+73\pi + 7
  2. (B)7
  3. (C)4π+74\pi + 7
  4. (D)3π−53\pi - 5

Tests: Bring an angle into the principal range of cot⁻¹ and use the double-angle formula for tan⁻¹.

Show solution
  1. The principal range of cot⁡−1\cot^{-1} is (0,π)(0, \pi), and cot⁡\cot has period π\pi. Since 4π≈12.5664\pi \approx 12.566, −11+4π≈1.566∈(0,π)-11 + 4\pi \approx 1.566 \in (0, \pi). So cot⁡−1(cot⁡(−11))=4π−11\cot^{-1}(\cot(-11)) = 4\pi - 11.

    Why: Shift −11 by a multiple of π until it lands in (0, π).

  2. cos⁡−1(12)=π4\cos^{-1}\left(\dfrac{1}{\sqrt{2}}\right) = \dfrac{\pi}{4}, so 10sin⁡(π2)=1010\sin\left(\dfrac{\pi}{2}\right) = 10.
  3. sin⁡(2tan⁡−1x)=2x1+x2\sin(2\tan^{-1} x) = \dfrac{2x}{1 + x^2}, so sin⁡(2tan⁡−12)=45\sin(2\tan^{-1} 2) = \dfrac{4}{5} and 10×45=810 \times \dfrac{4}{5} = 8.
  4. Total: (4π−11)+10+8=4π+7(4\pi - 11) + 10 + 8 = 4\pi + 7.
AnswerAnswer: (C) 4π+74\pi + 7
Ask about this question

Mathematics, Section 2: 4 questions, one or more options correct: +4 if all correct options are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −1 in all other cases

Q5

Mathematics, Question 5 (4 marks)

Probability (independent events, conditional probability) · +4 / −1
Suppose that Box I contains 6 red balls and 9 green balls, and Box II contains 8 red balls and 12 green balls. All the balls of Box I and Box II are mixed together and a ball is chosen at random from them. Let E1E_1 be the event that the ball chosen belonged to Box I and let E2E_2 be the event that the ball chosen belonged to Box II. Let F1F_1 be the event that the ball chosen is red and let F2F_2 be the event that the ball chosen is green. Then which of the following statements is (are) TRUE?
  1. (A)The events E1E_1 and F1F_1 are independent
  2. (B)The events E2E_2 and F2F_2 are dependent
  3. (C)The conditional probability P(F1∣E1)P(F_1 \mid E_1) is equal to the conditional probability P(F1∣E2)P(F_1 \mid E_2)
  4. (D)The conditional probability P(F1∣E1)P(F_1 \mid E_1) is greater than the conditional probability P(F2∣E2)P(F_2 \mid E_2)

Tests: Test independence with P(A ∩ B) = P(A)P(B) and read conditional probabilities straight off each box.

Show solution
  1. There are 15+20=3515 + 20 = 35 balls, 6+8=146 + 8 = 14 red. P(E1)=1535=37P(E_1) = \dfrac{15}{35} = \dfrac{3}{7}, P(F1)=1435=25P(F_1) = \dfrac{14}{35} = \dfrac{2}{5}, P(E1∩F1)=635P(E_1 \cap F_1) = \dfrac{6}{35}.
  2. (A) P(E1)P(F1)=37⋅25=635=P(E1∩F1)P(E_1)P(F_1) = \dfrac{3}{7} \cdot \dfrac{2}{5} = \dfrac{6}{35} = P(E_1 \cap F_1): independent. True.
  3. (B) E2=E1′E_2 = E_1' and F2=F1′F_2 = F_1'. Complements of independent events are independent, so E2E_2 and F2F_2 are independent. False.

    Why: Check: P(E₂ ∩ F₂) = 12/35 = (4/7)(3/5).

  4. (C) P(F1∣E1)=615=25P(F_1 \mid E_1) = \dfrac{6}{15} = \dfrac{2}{5} and P(F1∣E2)=820=25P(F_1 \mid E_2) = \dfrac{8}{20} = \dfrac{2}{5}. Equal: true.
  5. (D) P(F2∣E2)=1220=35>25=P(F1∣E1)P(F_2 \mid E_2) = \dfrac{12}{20} = \dfrac{3}{5} > \dfrac{2}{5} = P(F_1 \mid E_1). False.
AnswerAnswer: (A), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Three-dimensional geometry (planes) · +4 / −1
Let PP be the plane such that it contains the straight line x−12=y−33=z+21\dfrac{x-1}{2} = \dfrac{y-3}{3} = \dfrac{z+2}{1} and is perpendicular to the plane x+2y+3z=4x + 2y + 3z = 4. Let P1P_1 be the plane which passes through the point (4,2,2)(4, 2, 2) and is parallel to PP. Then which of the following statements is (are) TRUE?
  1. (A)The equation of the plane PP is 7x−5y+z=−107x - 5y + z = -10
  2. (B)The distance between the planes PP and P1P_1 is 30
  3. (C)The distance of the plane PP from the origin is 232\sqrt{3}
  4. (D)The acute angle between the plane PP and the plane 2x+2y+z=32x + 2y + z = 3 is cos⁡−1(133)\cos^{-1}\left(\dfrac{1}{3\sqrt{3}}\right)

Tests: Build a plane's normal from a cross product, then use the distance and angle formulas for planes.

Show solution
  1. The normal of PP is perpendicular to the line's direction (2,3,1)(2, 3, 1) and to the other plane's normal (1,2,3)(1, 2, 3): n⃗=(2,3,1)×(1,2,3)=(9−2, 1−6, 4−3)=(7,−5,1)\vec{n} = (2, 3, 1) \times (1, 2, 3) = (9 - 2,\ 1 - 6,\ 4 - 3) = (7, -5, 1).

    Why: P contains the line, and P ⟂ the plane means P contains that plane's normal direction.

  2. (A) Through (1,3,−2)(1, 3, -2): 7(x−1)−5(y−3)+(z+2)=07(x - 1) - 5(y - 3) + (z + 2) = 0, i.e. 7x−5y+z=−107x - 5y + z = -10. True.
  3. (B) P1P_1: 7x−5y+z=28−10+2=207x - 5y + z = 28 - 10 + 2 = 20. Distance =∣20−(−10)∣49+25+1=3053=23= \dfrac{|20 - (-10)|}{\sqrt{49 + 25 + 1}} = \dfrac{30}{5\sqrt{3}} = 2\sqrt{3}, not 30. False.
  4. (C) Distance of PP from the origin =1053=23= \dfrac{10}{5\sqrt{3}} = \dfrac{2}{\sqrt{3}}, not 232\sqrt{3}. False.
  5. (D) cos⁡θ=∣7⋅2−5⋅2+1⋅1∣53⋅3=5153=133\cos\theta = \dfrac{|7 \cdot 2 - 5 \cdot 2 + 1 \cdot 1|}{5\sqrt{3} \cdot 3} = \dfrac{5}{15\sqrt{3}} = \dfrac{1}{3\sqrt{3}}. True.
AnswerAnswer: (A), (D)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Continuity and differentiability · +4 / −1
Let R\mathbb{R} denote the set of all real numbers. Let f:R→Rf: \mathbb{R} \rightarrow \mathbb{R} be an arbitrary function and let g:R→Rg: \mathbb{R} \rightarrow \mathbb{R} be the function defined by g(x)=xf(x)g(x) = xf(x), for all x∈Rx \in \mathbb{R}. Then which of the following statements is (are) TRUE?
  1. (A)The function gg is always continuous at x=0x = 0
  2. (B)If ff is continuous at x=0x = 0, then gg is differentiable at x=0x = 0
  3. (C)If gg is differentiable at x=0x = 0, then ff is continuous at x=0x = 0
  4. (D)If gg is differentiable at x=0x = 0, then lim⁡x→0f(x)\lim\limits_{x \to 0} f(x) exists

Tests: Write g′(0) from the definition and see it is the limit of f; build counterexamples for the false options.

Show solution
  1. g(0)=0⋅f(0)=0g(0) = 0 \cdot f(0) = 0, so g(x)−g(0)x−0=f(x)\dfrac{g(x) - g(0)}{x - 0} = f(x) for x≠0x \ne 0. Hence g′(0)g'(0) exists exactly when lim⁡x→0f(x)\lim\limits_{x \to 0} f(x) exists, and then g′(0)g'(0) equals that limit.

    Why: This one identity settles B, C and D.

  2. (A) Take f(x)=1xf(x) = \dfrac{1}{x} for x≠0x \ne 0, f(0)=0f(0) = 0. Then g(x)=1g(x) = 1 for x≠0x \ne 0 but g(0)=0g(0) = 0: gg is not continuous at 0. False.

    Why: f is arbitrary, so it may be unbounded near 0.

  3. (B) If ff is continuous at 0, lim⁡x→0f(x)=f(0)\lim\limits_{x \to 0} f(x) = f(0) exists, so g′(0)=f(0)g'(0) = f(0). True.
  4. (C) Take f(x)=0f(x) = 0 for x≠0x \ne 0 and f(0)=1f(0) = 1. Then g≡0g \equiv 0 is differentiable, but ff is not continuous at 0 (the limit 0 differs from f(0)=1f(0) = 1). False.
  5. (D) If g′(0)g'(0) exists, then lim⁡x→0f(x)=g′(0)\lim\limits_{x \to 0} f(x) = g'(0) exists. True.
AnswerAnswer: (B), (D)
Ask about this question
Q8

Mathematics, Question 8 (4 marks)

Matrices (powers, similarity, systems of equations) · +4 / −1
Consider the matrix M=[2−110]M = \begin{bmatrix} 2 & -1 \\ 1 & 0 \end{bmatrix}. Let p,q,r,s,a,b,cp, q, r, s, a, b, c and dd be integers such that M26=[pqrs]M^{26} = \begin{bmatrix} p & q \\ r & s \end{bmatrix} and ∑k=126Mk=[abcd]\sum\limits_{k=1}^{26} M^k = \begin{bmatrix} a & b \\ c & d \end{bmatrix}. Then which of the following statements is (are) TRUE?
  1. (A)There exists a 2×22 \times 2 invertible matrix NN with real entries such that MN=N[1101]MN = N\begin{bmatrix} 1 & 1 \\ 0 & 1 \end{bmatrix}
  2. (B)The value of aa is 378
  3. (C)For any two given integers mm and nn, there exist unique integers xx and yy such that px+qy=mpx + qy = m and rx+sy=nrx + sy = n
  4. (D)For each positive real number tt, the system of linear equations (a+t)x+by=1(a + t)x + by = 1, cx+(d+t)y=−1cx + (d + t)y = -1 has a unique solution

Tests: Split a matrix as I + nilpotent to get its powers, and use determinants for invertibility and integer solutions.

Show solution
  1. Write M=I+KM = I + K with K=[1−11−1]K = \begin{bmatrix} 1 & -1 \\ 1 & -1 \end{bmatrix}. Then K2=OK^2 = O, so Mn=I+nK=[1+n−nn1−n]M^n = I + nK = \begin{bmatrix} 1 + n & -n \\ n & 1 - n \end{bmatrix}.

    Why: I and K commute, and every term of the binomial expansion with K² or higher vanishes.

  2. M26=[27−2626−25]M^{26} = \begin{bmatrix} 27 & -26 \\ 26 & -25 \end{bmatrix}. ∑k=126Mk=26I+(∑k=126k)K=26I+351K=[377−351351−325]\sum_{k=1}^{26} M^k = 26I + \left(\sum_{k=1}^{26} k\right)K = 26I + 351K = \begin{bmatrix} 377 & -351 \\ 351 & -325 \end{bmatrix}.
  3. (A) Take NN with columns n1=(1,1)n_1 = (1, 1) and n2=(1,0)n_2 = (1, 0). Then Mn1=n1Mn_1 = n_1 and Mn2=(2,1)=n1+n2Mn_2 = (2, 1) = n_1 + n_2, which is exactly MN=N[1101]MN = N\begin{bmatrix} 1 & 1 \\ 0 & 1 \end{bmatrix}, and det⁡N=−1≠0\det N = -1 \ne 0. True.
  4. (B) a=26+351=377a = 26 + 351 = 377, not 378. False.
  5. (C) det⁡M26=(det⁡M)26=1\det M^{26} = (\det M)^{26} = 1. So (M26)−1=[−2526−2627](M^{26})^{-1} = \begin{bmatrix} -25 & 26 \\ -26 & 27 \end{bmatrix} has integer entries, and [xy]=(M26)−1[mn]\begin{bmatrix} x \\ y \end{bmatrix} = (M^{26})^{-1}\begin{bmatrix} m \\ n \end{bmatrix} is the unique solution, in integers. True.
  6. (D) The coefficient matrix is (26+t)I+351K(26 + t)I + 351K. Its determinant: (377+t)(t−325)+3512=t2+52t−122525+123201=(t+26)2>0(377 + t)(t - 325) + 351^2 = t^2 + 52t - 122525 + 123201 = (t + 26)^2 > 0 for t>0t > 0. Unique solution: true.
AnswerAnswer: (A), (C), (D)
Ask about this question

Mathematics, Section 3: 4 questions, numerical value answer (truncate or round off to two decimal places): +4 if correct, 0 otherwise

Q9

Mathematics, Question 9 (4 marks)

Relations and permutations (equivalence relations) · +4
Let S={1,2,3,…,10}S = \{1, 2, 3, \dots, 10\}. Consider the set X={R:R is an equivalence relation on the set S such that R has exactly 42 elements}X = \{R : R \text{ is an equivalence relation on the set } S \text{ such that } R \text{ has exactly 42 elements}\}. Then the number of elements in XX is ____.

Tests: Turn equivalence relations into partitions and count partitions of a given type.

Show solution
  1. An equivalence relation is a partition of SS into classes; a class of size kk contributes k2k^2 ordered pairs. So we need class sizes with ∑ki=10\sum k_i = 10 and ∑ki2=42\sum k_i^2 = 42.
  2. Largest class 7 gives 49>4249 > 42: impossible. Largest class 4 or less gives at most 16+16+4=36<4216 + 16 + 4 = 36 < 42: impossible.
  3. Largest 6: the other 4 elements need squares summing to 6: sizes 2,1,12, 1, 1. Partition type {6,2,1,1}\{6, 2, 1, 1\}. Largest 5: the other 5 need squares summing to 17: sizes 4,14, 1. Type {5,4,1}\{5, 4, 1\}.
  4. Type {6,2,1,1}\{6, 2, 1, 1\}: 10!6! 2! 1! 1! 2!=1260\dfrac{10!}{6!\,2!\,1!\,1!\,2!} = 1260 (divide by 2!2! for the two equal singletons).
  5. Type {5,4,1}\{5, 4, 1\}: 10!5! 4! 1!=1260\dfrac{10!}{5!\,4!\,1!} = 1260.
  6. Total 1260+1260=25201260 + 1260 = 2520.
AnswerAnswer: 2520
Ask about this question
Q10

Mathematics, Question 10 (4 marks)

Continuity and differentiability (greatest integer function) · +4
Consider the function f:(−π2,π2)→(−∞,∞)f: \left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right) \rightarrow (-\infty, \infty) defined by f(x)=(∣x∣+∣x−1∣)sin⁡x+[xsin⁡x]f(x) = (|x| + |x - 1|)\sin x + [x\sin x], where [xsin⁡x][x\sin x] is the greatest integer less than or equal to xsin⁡xx\sin x. Let α\alpha be the total number of points in the interval (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right) at which ff is NOT continuous, and let β\beta be the total number of points in the interval (−π2,π2)\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right) at which ff is NOT differentiable. Then the value of α+β\alpha + \beta is ____.

Tests: Find jumps of a greatest-integer function and corners of |x − a| terms, checking each candidate point.

Show solution
  1. h(x)=xsin⁡xh(x) = x\sin x is even, h(0)=0h(0) = 0, h≥0h \ge 0 on the interval, and it increases on [0,π2)\left[0, \dfrac{\pi}{2}\right) towards π2≈1.57\dfrac{\pi}{2} \approx 1.57. So hh takes values in [0,π2)\left[0, \dfrac{\pi}{2}\right).

    Why: h′(x) = sin x + x cos x > 0 for 0 < x < π/2.

  2. [h(x)][h(x)] is 0 where h<1h < 1 and 1 where h≥1h \ge 1. h(x)=1h(x) = 1 at exactly two points x=±x0x = \pm x_0, x0≈1.114x_0 \approx 1.114. The floor jumps there. At x=0x = 0, h≥0h \ge 0 on both sides, so [h]=0[h] = 0 near 0: no jump.
  3. The first part (∣x∣+∣x−1∣)sin⁡x(|x| + |x - 1|)\sin x is continuous, so ff is discontinuous exactly at ±x0\pm x_0: α=2\alpha = 2.
  4. Non-differentiable points: ±x0\pm x_0 (not continuous). At x=0x = 0: ∣x∣sin⁡x|x|\sin x has derivative 0 there (it behaves like x∣x∣x|x|), so no corner. At x=1x = 1: ∣x−1∣sin⁡x|x - 1|\sin x has a corner because sin⁡1≠0\sin 1 \ne 0, and [h]=0[h] = 0 near 1 since h(1)=sin⁡1≈0.84<1h(1) = \sin 1 \approx 0.84 < 1.

    Why: |x − a|·u(x) is not differentiable at a when u(a) ≠ 0.

  5. So β=3\beta = 3 (at −x0-x_0, 11, x0x_0; note x0≈1.114≠1x_0 \approx 1.114 \ne 1), and α+β=2+3=5\alpha + \beta = 2 + 3 = 5.
AnswerAnswer: 5
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Permutations and combinations (distribution) · +4
The number of ways to distribute 10 identical red pens and 14 identical blue pens among four persons such that each person gets 6 pens, is ____.

Tests: Reduce a two-colour distribution to one bounded equation and count it with inclusion–exclusion.

Show solution
  1. Each person gets 6 pens and there are 4×6=24=10+144 \times 6 = 24 = 10 + 14 pens, so a distribution is fixed by the red counts r1,r2,r3,r4r_1, r_2, r_3, r_4; each person's blue count is 6−ri6 - r_i.
  2. Count r1+r2+r3+r4=10r_1 + r_2 + r_3 + r_4 = 10 with 0≤ri≤60 \le r_i \le 6. Without the upper bound: (133)=286\binom{13}{3} = 286.
  3. Subtract cases with some ri≥7r_i \ge 7: put ri′=ri−7r_i' = r_i - 7, sum 3: (63)=20\binom{6}{3} = 20 each, 4×20=804 \times 20 = 80. Two ri≥7r_i \ge 7 would need 14 red pens: impossible.
  4. 286−80=206286 - 80 = 206. (The blue counts 6−ri≤66 - r_i \le 6 and sum to 14 automatically.)
AnswerAnswer: 206
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Trigonometric identities (products of cosines) · +4
Let α=(1−2cos⁡(π11))(1−2cos⁡(3π11))(1−2cos⁡(9π11))(1−2cos⁡(27π11))(1−2cos⁡(81π11))\alpha = \left(1 - 2\cos\left(\dfrac{\pi}{11}\right)\right)\left(1 - 2\cos\left(\dfrac{3\pi}{11}\right)\right)\left(1 - 2\cos\left(\dfrac{9\pi}{11}\right)\right)\left(1 - 2\cos\left(\dfrac{27\pi}{11}\right)\right)\left(1 - 2\cos\left(\dfrac{81\pi}{11}\right)\right). Then the value of 5−α25 - \alpha^2 is ____.

Tests: Reduce angles modulo 2π and telescope a product using 1 + 2cos φ = sin(3φ/2)/sin(φ/2).

Show solution
  1. Reduce the angles: cos⁡27π11=cos⁡(2π+5π11)=cos⁡5π11\cos\dfrac{27\pi}{11} = \cos\left(2\pi + \dfrac{5\pi}{11}\right) = \cos\dfrac{5\pi}{11} and cos⁡81π11=cos⁡(7π+4π11)=−cos⁡4π11=cos⁡7π11\cos\dfrac{81\pi}{11} = \cos\left(7\pi + \dfrac{4\pi}{11}\right) = -\cos\dfrac{4\pi}{11} = \cos\dfrac{7\pi}{11}. So the angles are kπ11\dfrac{k\pi}{11} for k=1,3,5,7,9k = 1, 3, 5, 7, 9.
  2. Use 1−2cos⁡θ=1+2cos⁡(π−θ)1 - 2\cos\theta = 1 + 2\cos(\pi - \theta) and 1+2cos⁡ϕ=sin⁡(3ϕ/2)sin⁡(ϕ/2)1 + 2\cos\phi = \dfrac{\sin(3\phi/2)}{\sin(\phi/2)}. With θ=kπ11\theta = \dfrac{k\pi}{11}, π−θ=2jπ11\pi - \theta = \dfrac{2j\pi}{11} for j=5,4,3,2,1j = 5, 4, 3, 2, 1.

    Why: sin 3u = sin u (3 − 4 sin²u) = sin u (1 + 2 cos 2u).

  3. So α=∏j=15sin⁡(3jπ/11)sin⁡(jπ/11)\alpha = \prod_{j=1}^{5} \dfrac{\sin(3j\pi/11)}{\sin(j\pi/11)}. The numerators: sin⁡3π11\sin\dfrac{3\pi}{11}, sin⁡6π11=sin⁡5π11\sin\dfrac{6\pi}{11} = \sin\dfrac{5\pi}{11}, sin⁡9π11=sin⁡2π11\sin\dfrac{9\pi}{11} = \sin\dfrac{2\pi}{11}, sin⁡12π11=−sin⁡π11\sin\dfrac{12\pi}{11} = -\sin\dfrac{\pi}{11}, sin⁡15π11=−sin⁡4π11\sin\dfrac{15\pi}{11} = -\sin\dfrac{4\pi}{11}.
  4. The numerators are the denominators sin⁡jπ11\sin\dfrac{j\pi}{11}, j=1,…,5j = 1, \dots, 5, rearranged, with two minus signs. So α=(−1)2=1\alpha = (-1)^2 = 1.
  5. 5−α2=5−1=45 - \alpha^2 = 5 - 1 = 4. (A numerical check of the product gives 1.00001.0000.)
AnswerAnswer: 4
Ask about this question

Mathematics, Section 4: 4 matching list sets (List-I with four entries, List-II with five), only one option correct: +4 if correct, −1 if wrong, 0 if unanswered

Q13

Mathematics, Question 13 (4 marks)

Complex numbers and quadratic equations · +4 / −1
Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) If α\alpha and β\beta are the distinct roots of the equation x2+x+1=0x^2 + x + 1 = 0, then the quadratic equation with roots 1(α+1)2026\dfrac{1}{(\alpha+1)^{2026}} and 1(β+1)2026\dfrac{1}{(\beta+1)^{2026}} is(1) x2+x+1=0x^2 + x + 1 = 0
(Q) If α\alpha and β\beta are the distinct roots of the equation x2+x+1=0x^2 + x + 1 = 0, then the quadratic equation with roots 1(α+1)2027\dfrac{1}{(\alpha+1)^{2027}} and 1(β+1)2027\dfrac{1}{(\beta+1)^{2027}} is(2) x2−x+1=0x^2 - x + 1 = 0
(R) If γ\gamma and δ\delta are the distinct roots of the equation x2−x+1=0x^2 - x + 1 = 0, then the value of 1(γ−1)2026+1(δ−1)2026\dfrac{1}{(\gamma-1)^{2026}} + \dfrac{1}{(\delta-1)^{2026}} is(3) x2+x−1=0x^2 + x - 1 = 0
(S) If pp and rr are the distinct roots of the equation x2+x−1=0x^2 + x - 1 = 0, then the value of 1(p+1)3+1(r+1)3\dfrac{1}{(p+1)^3} + \dfrac{1}{(r+1)^3} is(4) −1-1
(5) −4-4
  1. (A)P →\rightarrow 1, Q →\rightarrow 2, R →\rightarrow 5, S →\rightarrow 4
  2. (B)P →\rightarrow 3, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 5
  3. (C)P →\rightarrow 1, Q →\rightarrow 2, R →\rightarrow 4, S →\rightarrow 5
  4. (D)P →\rightarrow 2, Q →\rightarrow 3, R →\rightarrow 5, S →\rightarrow 4

Tests: Use the cube roots of unity to reduce huge powers, and symmetric functions of roots for the last part.

Show solution
  1. The roots of x2+x+1=0x^2 + x + 1 = 0 are ω,ω2\omega, \omega^2 (ω3=1\omega^3 = 1, 1+ω+ω2=01 + \omega + \omega^2 = 0). So α+1=−α2\alpha + 1 = -\alpha^2 for α∈{ω,ω2}\alpha \in \{\omega, \omega^2\}.
  2. (P) (α+1)2026=α4052=α2(\alpha + 1)^{2026} = \alpha^{4052} = \alpha^2 (since 4052=3⋅1350+24052 = 3 \cdot 1350 + 2), so 1(α+1)2026=α−2=α\dfrac{1}{(\alpha+1)^{2026}} = \alpha^{-2} = \alpha. The new roots are ω,ω2\omega, \omega^2 again: x2+x+1=0x^2 + x + 1 = 0 →\rightarrow (1).
  3. (Q) (α+1)2027=−α4054=−α(\alpha + 1)^{2027} = -\alpha^{4054} = -\alpha (4054=3⋅1351+14054 = 3 \cdot 1351 + 1), so the new root is −α−1=−α2-\alpha^{-1} = -\alpha^2. Roots −ω2,−ω-\omega^2, -\omega: sum 11, product 11, so x2−x+1=0x^2 - x + 1 = 0 →\rightarrow (2).
  4. (R) The roots of x2−x+1=0x^2 - x + 1 = 0 are −ω,−ω2-\omega, -\omega^2. −ω−1=ω2-\omega - 1 = \omega^2 and −ω2−1=ω-\omega^2 - 1 = \omega. Since 2026=3⋅675+12026 = 3 \cdot 675 + 1: (ω2)2026=ω4052=ω2(\omega^2)^{2026} = \omega^{4052} = \omega^2 and ω2026=ω\omega^{2026} = \omega. The sum is 1ω2+1ω=ω+ω2=−1\dfrac{1}{\omega^2} + \dfrac{1}{\omega} = \omega + \omega^2 = -1 →\rightarrow (4).
  5. (S) p+r=−1p + r = -1, pr=−1pr = -1. Let u=p+1u = p + 1, v=r+1v = r + 1: u+v=1u + v = 1, uv=pr+(p+r)+1=−1uv = pr + (p + r) + 1 = -1.
  6. 1u3+1v3=u3+v3(uv)3=(u+v)3−3uv(u+v)(uv)3=1+3−1=−4\dfrac{1}{u^3} + \dfrac{1}{v^3} = \dfrac{u^3 + v^3}{(uv)^3} = \dfrac{(u + v)^3 - 3uv(u + v)}{(uv)^3} = \dfrac{1 + 3}{-1} = -4 →\rightarrow (5).
AnswerAnswer: (C) P →\rightarrow 1, Q →\rightarrow 2, R →\rightarrow 4, S →\rightarrow 5
Ask about this question
Q14

Mathematics, Question 14 (4 marks)

Trigonometric equations · +4 / −1
Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) The number of elements in the set {x∈[−π,π]:sin⁡6x+cos⁡4x=1}\{x \in [-\pi, \pi] : \sin^6 x + \cos^4 x = 1\}(1) is 1
(Q) The number of elements in the set {x∈[−π2,π2]:sin⁡2x+cos⁡6x=1}\left\{x \in \left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right] : \sin^2 x + \cos^6 x = 1\right\}(2) is 2
(R) The number of elements in the set {x∈[−π,π]:cos⁡2(x2)−sin⁡2x=12}\left\{x \in [-\pi, \pi] : \cos^2\left(\dfrac{x}{2}\right) - \sin^2 x = \dfrac{1}{2}\right\}(3) is 3
(S) The number of elements in the set {x∈[−2π,2π]:6sin⁡2(x2)−cos⁡3x=3}\left\{x \in [-2\pi, 2\pi] : 6\sin^2\left(\dfrac{x}{2}\right) - \cos 3x = 3\right\}(4) is 4
(5) is 5
  1. (A)P →\rightarrow 2, Q →\rightarrow 5, R →\rightarrow 3, S →\rightarrow 4
  2. (B)P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 4
  3. (C)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 3
  4. (D)P →\rightarrow 4, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 5

Tests: Reduce each equation to a polynomial in one trigonometric function and count solutions in the given interval.

Show solution
  1. (P) Put s=sin⁡2xs = \sin^2 x: s3+(1−s)2=1s^3 + (1 - s)^2 = 1, i.e. s3+s2−2s=s(s−1)(s+2)=0s^3 + s^2 - 2s = s(s - 1)(s + 2) = 0. So sin⁡x=0\sin x = 0 (x=−π,0,πx = -\pi, 0, \pi) or sin⁡2x=1\sin^2 x = 1 (x=±π2x = \pm\dfrac{\pi}{2}): 5 elements →\rightarrow (5).
  2. (Q) Put c=cos⁡2xc = \cos^2 x: 1−c+c3=11 - c + c^3 = 1, so c(c2−1)=0c(c^2 - 1) = 0, c=0c = 0 or 11. cos⁡x=0\cos x = 0: x=±π2x = \pm\dfrac{\pi}{2}; cos⁡2x=1\cos^2 x = 1: x=0x = 0. 3 elements →\rightarrow (3).
  3. (R) 1+cos⁡x2−(1−cos⁡2x)=12\dfrac{1 + \cos x}{2} - (1 - \cos^2 x) = \dfrac{1}{2} gives 2cos⁡2x+cos⁡x−2=02\cos^2 x + \cos x - 2 = 0, so cos⁡x=−1±174\cos x = \dfrac{-1 \pm \sqrt{17}}{4}. Only 17−14≈0.78\dfrac{\sqrt{17} - 1}{4} \approx 0.78 lies in [−1,1][-1, 1]; it gives two xx in [−π,π][-\pi, \pi] (±cos⁡−1\pm\cos^{-1} of it). 2 elements →\rightarrow (2).
  4. (S) 6sin⁡2x2=3(1−cos⁡x)6\sin^2\dfrac{x}{2} = 3(1 - \cos x), so the equation is 3−3cos⁡x−cos⁡3x=33 - 3\cos x - \cos 3x = 3, i.e. 3cos⁡x+cos⁡3x=03\cos x + \cos 3x = 0. With cos⁡3x=4cos⁡3x−3cos⁡x\cos 3x = 4\cos^3 x - 3\cos x: 4cos⁡3x=04\cos^3 x = 0, cos⁡x=0\cos x = 0.
  5. In [−2π,2π][-2\pi, 2\pi]: x=±π2,±3π2x = \pm\dfrac{\pi}{2}, \pm\dfrac{3\pi}{2}. 4 elements →\rightarrow (4).
AnswerAnswer: (B) P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 4
Ask about this question
Q15

Mathematics, Question 15 (4 marks)

Matrices and vectors (orthogonal matrices, triple products) · +4 / −1
For real numbers α,β,γ,δ\alpha, \beta, \gamma, \delta and μ\mu, consider the matrix M=[α12−1213β13γδμ]M = \begin{bmatrix} \alpha & \dfrac{1}{\sqrt{2}} & -\dfrac{1}{\sqrt{2}} \\ \dfrac{1}{\sqrt{3}} & \beta & \dfrac{1}{\sqrt{3}} \\ \gamma & \delta & \mu \end{bmatrix}. Suppose that MMT=IMM^T = I, where MTM^T is the transpose of the matrix MM, and II is the 3×33 \times 3 identity matrix. Let u⃗=αi^+13j^+γk^\vec{u} = \alpha\hat{i} + \dfrac{1}{\sqrt{3}}\hat{j} + \gamma\hat{k}, v⃗=12i^+βj^+δk^\vec{v} = \dfrac{1}{\sqrt{2}}\hat{i} + \beta\hat{j} + \delta\hat{k} and w⃗=−12i^+13j^+μk^\vec{w} = -\dfrac{1}{\sqrt{2}}\hat{i} + \dfrac{1}{\sqrt{3}}\hat{j} + \mu\hat{k}. Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) The value of γ2+δ2\gamma^2 + \delta^2 is(1) 0
(Q) If xu⃗+yv⃗+zw⃗=j^x\vec{u} + y\vec{v} + z\vec{w} = \hat{j} for some real numbers xx, yy and zz, then the value of xx is(2) 1
(R) The value of ∣u⃗⋅(v⃗×w⃗)∣|\vec{u} \cdot (\vec{v} \times \vec{w})| is(3) 12\dfrac{1}{\sqrt{2}}
(S) The value of ∣u⃗×(v⃗×w⃗)∣|\vec{u} \times (\vec{v} \times \vec{w})| is(4) 13\dfrac{1}{\sqrt{3}}
(5) 56\dfrac{5}{6}
  1. (A)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 2, S →\rightarrow 1
  2. (B)P →\rightarrow 4, Q →\rightarrow 5, R →\rightarrow 1, S →\rightarrow 2
  3. (C)P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 1
  4. (D)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 2

Tests: Use orthonormal rows and columns of an orthogonal matrix to evaluate entries, coordinates and triple products.

Show solution
  1. MMT=IMM^T = I: the rows of MM are orthonormal. Row 1: α2+12+12=1\alpha^2 + \dfrac{1}{2} + \dfrac{1}{2} = 1, so α=0\alpha = 0. Row 1 ⋅\cdot row 2 =β2−16=0= \dfrac{\beta}{\sqrt{2}} - \dfrac{1}{\sqrt{6}} = 0, so β=13\beta = \dfrac{1}{\sqrt{3}} (and then row 2 has length 1).
  2. Row 3 ⊥\perp row 1: δ−μ2=0\dfrac{\delta - \mu}{\sqrt{2}} = 0, so μ=δ\mu = \delta. Row 3 ⊥\perp row 2: γ+δ+μ=0\gamma + \delta + \mu = 0, so γ=−2δ\gamma = -2\delta. Unit length: 4δ2+δ2+δ2=14\delta^2 + \delta^2 + \delta^2 = 1, δ2=16\delta^2 = \dfrac{1}{6}.
  3. (P) γ2+δ2=46+16=56\gamma^2 + \delta^2 = \dfrac{4}{6} + \dfrac{1}{6} = \dfrac{5}{6} →\rightarrow (5).
  4. u⃗,v⃗,w⃗\vec{u}, \vec{v}, \vec{w} are the three columns of MM. For a square matrix MMT=IMM^T = I also gives MTM=IM^TM = I, so u⃗,v⃗,w⃗\vec{u}, \vec{v}, \vec{w} are orthonormal.

    Why: M^T is the inverse of M, and a left inverse is also a right inverse.

  5. (Q) Dot both sides with u⃗\vec{u}: x=u⃗⋅j^=13x = \vec{u} \cdot \hat{j} = \dfrac{1}{\sqrt{3}} →\rightarrow (4).
  6. (R) ∣u⃗⋅(v⃗×w⃗)∣=∣det⁡M∣=1|\vec{u} \cdot (\vec{v} \times \vec{w})| = |\det M| = 1 →\rightarrow (2). (S) u⃗×(v⃗×w⃗)=(u⃗⋅w⃗)v⃗−(u⃗⋅v⃗)w⃗=0⃗\vec{u} \times (\vec{v} \times \vec{w}) = (\vec{u} \cdot \vec{w})\vec{v} - (\vec{u} \cdot \vec{v})\vec{w} = \vec{0}, magnitude 0 →\rightarrow (1).
AnswerAnswer: (A) P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 2, S →\rightarrow 1
Ask about this question
Q16

Mathematics, Question 16 (4 marks)

Conic sections (circle, parabola, ellipse, hyperbola) · +4 / −1
Match each entry in List-I to the correct entry in List-II and choose the correct option.
List-IList-II
(P) The circle with centre (1,2)(1, 2) and touching the straight line 3x+4y=13x + 4y = 1, passes through(1) the point (1,1)(1, 1)
(Q) The common tangent to the circle x2+y2=2x^2 + y^2 = 2 and the parabola y2=8xy^2 = 8x with positive slope, passes through(2) the point (7,9)(7, 9)
(R) Let MM be the end point of the latus rectum of the ellipse 3x2+4y2=483x^2 + 4y^2 = 48 such that MM lies in the first quadrant. Then the normal to the ellipse drawn at MM passes through(3) the point (3,2)(3, 2)
(S) Let HH be the hyperbola whose centre is at the origin, one of the foci is at (5,0)(5, 0), and one directrix is 5x+16=05x + 16 = 0. Then HH passes through(4) the point (2,5)(2, 5)
(5) the point (8,33)(8, 3\sqrt{3})
  1. (A)P →\rightarrow 3, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 2
  2. (B)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 5
  3. (C)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 4, S →\rightarrow 5
  4. (D)P →\rightarrow 4, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 3

Tests: Apply the standard tangent, normal, focus and directrix results for each conic and test the given points.

Show solution
  1. (P) Radius =∣3+8−1∣5=2= \dfrac{|3 + 8 - 1|}{5} = 2. The circle (x−1)2+(y−2)2=4(x - 1)^2 + (y - 2)^2 = 4 passes through (3,2)(3, 2) (distance 2); (1,1)(1, 1) is at distance 1 and (2,5)(2, 5) at 10\sqrt{10}. →\rightarrow (3).
  2. (Q) Tangents to y2=8xy^2 = 8x (a=2a = 2): y=mx+2my = mx + \dfrac{2}{m}. Tangent to the circle: ∣2/m∣1+m2=2\dfrac{|2/m|}{\sqrt{1 + m^2}} = \sqrt{2}, so m4+m2−2=0m^4 + m^2 - 2 = 0, m2=1m^2 = 1, m=1m = 1. The tangent y=x+2y = x + 2 passes through (7,9)(7, 9) →\rightarrow (2).
  3. (R) x216+y212=1\dfrac{x^2}{16} + \dfrac{y^2}{12} = 1: e2=1−1216=14e^2 = 1 - \dfrac{12}{16} = \dfrac{1}{4}, focus (2,0)(2, 0), M=(2,b2a)=(2,3)M = \left(2, \dfrac{b^2}{a}\right) = (2, 3).
  4. Normal at (x1,y1)(x_1, y_1): a2xx1−b2yy1=a2−b2\dfrac{a^2 x}{x_1} - \dfrac{b^2 y}{y_1} = a^2 - b^2, i.e. 8x−4y=48x - 4y = 4, or 2x−y=12x - y = 1. It passes through (1,1)(1, 1) →\rightarrow (1).
  5. (S) Focus (ae,0)=(5,0)(ae, 0) = (5, 0) and directrix x=−ae=−165x = -\dfrac{a}{e} = -\dfrac{16}{5}. So ae=5ae = 5, ae=165\dfrac{a}{e} = \dfrac{16}{5}: a2=16a^2 = 16, e=54e = \dfrac{5}{4}, b2=a2(e2−1)=9b^2 = a^2(e^2 - 1) = 9.
  6. H:x216−y29=1H: \dfrac{x^2}{16} - \dfrac{y^2}{9} = 1. At (8,33)(8, 3\sqrt{3}): 6416−279=4−3=1\dfrac{64}{16} - \dfrac{27}{9} = 4 - 3 = 1. →\rightarrow (5).
AnswerAnswer: (B) P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 5
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Rolling motion (rolling on a curved surface) · +3 / −1
Consider a large disk of radius RR and two smaller disks, each of radius r=R/50r = R/50, lying on its circumference, as shown in the figure. The smaller disks are initially in contact with each other, with an angular separation Δθ\Delta\theta between their centers. They are made to roll without slipping in opposite directions, with constant angular velocities ω\omega and 2ω2\omega while the large disk is held stationary. The time τ\tau at which the smaller disks are again in contact is: [Use sin⁡(Δθ)=Δθ\sin(\Delta\theta) = \Delta\theta and ignore gravity.] (The figure shows the large disk of radius RR and, on the outside of its rim near the top right, the two small disks of radius rr touching each other; dashed lines from the centre of the large disk to the centres of the small disks enclose the angle Δθ\Delta\theta. One small disk spins at ω\omega and moves anticlockwise round the rim, the other spins at 2ω2\omega and moves clockwise.)
  1. (A)τ=51×(2π−451)/ω\tau = 51 \times \left(2\pi - \dfrac{4}{51}\right)/\omega
  2. (B)τ=51×(2π−251)/3ω\tau = 51 \times \left(2\pi - \dfrac{2}{51}\right)/3\omega
  3. (C)τ=51×(2π−451)/3ω\tau = 51 \times \left(2\pi - \dfrac{4}{51}\right)/3\omega
  4. (D)τ=51×(2π−251)/ω\tau = 51 \times \left(2\pi - \dfrac{2}{51}\right)/\omega

Tests: Relate a rolling disk's spin to the speed of its centre round a fixed circle, then use relative angular speed.

Show solution
  1. Rolling without slipping on the fixed disk: the contact point is at rest, so a small disk spinning at ω\omega has its centre moving at v=ωrv = \omega r.

    Why: The contact point is the instantaneous axis, so v = (spin rate) × r.

  2. The centre moves on a circle of radius R+r=51rR + r = 51r, so it goes round OO at ωr51r=ω51\dfrac{\omega r}{51 r} = \dfrac{\omega}{51}. The other disk's centre goes round at 2ω51\dfrac{2\omega}{51} the other way.
  3. Relative angular speed of the two centres about OO: ω51+2ω51=3ω51\dfrac{\omega}{51} + \dfrac{2\omega}{51} = \dfrac{3\omega}{51}.
  4. When in contact the centres are 2r2r apart: 2r=2(R+r)sin⁡Δθ2≈(R+r)Δθ2r = 2(R+r)\sin\dfrac{\Delta\theta}{2} \approx (R+r)\Delta\theta, so Δθ=2rR+r=251\Delta\theta = \dfrac{2r}{R+r} = \dfrac{2}{51}.
  5. They move apart and meet from the other side when the gap has grown from Δθ\Delta\theta to 2π−Δθ2\pi - \Delta\theta: a relative turn of 2π−2Δθ=2π−4512\pi - 2\Delta\theta = 2\pi - \dfrac{4}{51}.
  6. τ=2π−4/513ω/51=51×(2π−451)/3ω\tau = \dfrac{2\pi - 4/51}{3\omega/51} = 51 \times \left(2\pi - \dfrac{4}{51}\right)/3\omega.
AnswerAnswer: (C) τ=51×(2π−451)/3ω\tau = 51 \times \left(2\pi - \dfrac{4}{51}\right)/3\omega
Ask about this question
Q2

Physics, Question 2 (3 marks)

Mutual inductance (LC circuit with a shorted coil) · +3 / −1
Consider a circuit consisting of a capacitor of capacitance CC and a coil with NN turns per unit length, cross sectional area SS and length dd, where d2≫Sd^2 \gg S. There is another coil of length d/2d/2, cross sectional area S/2S/2 and 2N2N turns per unit length completely inside the larger coil, as shown in the figure. The ends of this smaller coil are connected with each other by an insulated conducting wire. The self-inductance of the larger coil is LL. Neglecting edge effects and all the Ohmic resistances, the resonant frequency of the circuit is: (The figure shows the large coil of length dd in series with the capacitor CC and an AC source; the small coil of length d/2d/2 sits inside it, coaxial, with its two ends joined by a wire outside.)
  1. (A)415LC\dfrac{4}{\sqrt{15LC}}
  2. (B)65LC\dfrac{6}{\sqrt{5LC}}
  3. (C)23LC\dfrac{2}{\sqrt{3LC}}
  4. (D)23LC\sqrt{\dfrac{2}{3LC}}

Tests: Find the effective inductance of a coil when a shorted coil inside it cancels part of its flux.

Show solution
  1. Large coil: L=μ0N2SdL = \mu_0N^2Sd. Small coil: L2=μ0(2N)2S2d2=μ0N2Sd=LL_2 = \mu_0(2N)^2\dfrac{S}{2}\dfrac{d}{2} = \mu_0N^2Sd = L. Mutual: M=μ0N(2N)S2d2=L2M = \mu_0 N(2N)\dfrac{S}{2}\dfrac{d}{2} = \dfrac{L}{2}.

    Why: M uses the small coil's turns and area, since the large coil's field threads all of it.

  2. The small coil is a closed loop with no resistance, so its total flux stays at its initial value, zero: L2i2+Mi1=0L_2 i_2 + M i_1 = 0, so i2=−ML2i1=−i12i_2 = -\dfrac{M}{L_2}i_1 = -\dfrac{i_1}{2}.
  3. Flux linked with the large coil: Li1+Mi2=(L−M2L2)i1=(L−L4)i1=3L4i1L i_1 + M i_2 = \left(L - \dfrac{M^2}{L_2}\right)i_1 = \left(L - \dfrac{L}{4}\right)i_1 = \dfrac{3L}{4}i_1.
  4. Check: inside the small coil B=μ0(Ni1+2Ni2)=0B = \mu_0(Ni_1 + 2Ni_2) = 0, so the large coil loses the flux through area S/2S/2 over length d/2d/2, a quarter of its total.
  5. So the circuit is an LCLC circuit with Leff=3L4L_{eff} = \dfrac{3L}{4}: ω0=134LC=23LC\omega_0 = \dfrac{1}{\sqrt{\tfrac34 LC}} = \dfrac{2}{\sqrt{3LC}} (the options give the angular frequency).
AnswerAnswer: (C) 23LC\dfrac{2}{\sqrt{3LC}}
Ask about this question
Q3

Physics, Question 3 (3 marks)

Rotational dynamics (rolling off an edge) · +3 / −1
A solid cylinder of radius RR rolls without slipping with a center of mass speed v0=gR3v_0 = \sqrt{\dfrac{gR}{3}} on a horizontal surface with a vertical edge, as shown in the figure. Here, gg is the acceleration due to the gravity. At the moment when the cylinder loses contact with the surface due to rotation around the corner, the speed of its center of mass is: (The figure shows the cylinder on top of a block, moving to the right with speed v0v_0 towards the block's right edge, where the top face meets the vertical side.)
  1. (A)00
  2. (B)5gR7\sqrt{\dfrac{5gR}{7}}
  3. (C)gR15\sqrt{\dfrac{gR}{15}}
  4. (D)3gR7\sqrt{\dfrac{3gR}{7}}

Tests: Combine energy conservation about a pivot with the condition N = 0 for leaving a surface.

Show solution
  1. At the edge the contact point is the corner, and the cylinder starts turning about it with ω=v/R\omega = v/R; its centre moves on a circle of radius RR about the corner. Let θ\theta be the angle of the line corner-to-centre from the vertical.
  2. Moment of inertia about the corner: 12mR2+mR2=32mR2\tfrac12 mR^2 + mR^2 = \tfrac32 mR^2, so KE=12⋅32mR2ω2=34mv2KE = \tfrac12\cdot\tfrac32 mR^2\omega^2 = \tfrac34 mv^2.
  3. Energy: 34mv2=34mv02+mgR(1−cos⁡θ)\tfrac34 mv^2 = \tfrac34 mv_0^2 + mgR(1 - \cos\theta).
  4. Radial equation at the moment the normal force vanishes: mgcos⁡θ=mv2Rmg\cos\theta = \dfrac{mv^2}{R}, so v2=gRcos⁡θv^2 = gR\cos\theta.

    Why: Only gravity's radial component then supplies the centripetal force.

  5. Substitute: 34gRcos⁡θ=34⋅gR3+gR−gRcos⁡θ\tfrac34 gR\cos\theta = \tfrac34\cdot\dfrac{gR}{3} + gR - gR\cos\theta, so 74cos⁡θ=54\tfrac74\cos\theta = \tfrac54 and cos⁡θ=57\cos\theta = \dfrac57.
  6. v2=gR⋅57v^2 = gR\cdot\dfrac57, so v=5gR7v = \sqrt{\dfrac{5gR}{7}}. (At θ=0\theta = 0, v02=gR/3<gRv_0^2 = gR/3 < gR, so it does not leave at once.)
AnswerAnswer: (B) 5gR7\sqrt{\dfrac{5gR}{7}}
Ask about this question
Q4

Physics, Question 4 (3 marks)

Lens maker's formula (lens in a liquid) · +3 / −1
A double convex lens made of glass of refractive index 1.5 and radii of curvature of the curved surfaces 20 cm each is immersed in a liquid of refractive index nLn_L. The correct plot showing the variation of the power, in the units of diopter (DD), as a function of nLn_L is: (Each option is a graph of power in DD against nLn_L from 1.0 to 2.0.)
  1. (A)A curve, concave upwards, falling from +5+5 at nL=1.0n_L = 1.0 through 00 at nL=1.5n_L = 1.5 to about −2.5-2.5 at nL=2.0n_L = 2.0 (vertical scale −5-5 to 55).
  2. (B)A straight line falling from +5+5 at nL=1.0n_L = 1.0 through 00 at nL=1.5n_L = 1.5 to −5-5 at nL=2.0n_L = 2.0 (vertical scale −5-5 to 55).
  3. (C)Two branches (vertical scale −40-40 to 4040): from about +20+20 at nL=1.0n_L = 1.0 rising and shooting up to +∞+\infty just before 1.51.5; past 1.51.5 coming up from −∞-\infty and levelling off near −10-10 at 2.02.0.
  4. (D)Two branches (vertical scale −40-40 to 4040): from about −10-10 at nL=1.0n_L = 1.0 falling to −∞-\infty just before 1.51.5; past 1.51.5 coming down from +∞+\infty and levelling off near +20+20 at 2.02.0.

Tests: Use the lens maker's formula with the relative refractive index of glass to liquid.

Show solution
  1. Lens maker's formula in a liquid: 1f=(1.5nL−1)(1R1−1R2)\dfrac{1}{f} = \left(\dfrac{1.5}{n_L} - 1\right)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right) with R1=+0.2R_1 = +0.2 m, R2=−0.2R_2 = -0.2 m, so 1R1−1R2=10 m−1\dfrac{1}{R_1} - \dfrac{1}{R_2} = 10\ \text{m}^{-1}.
  2. P=1f=10(1.5nL−1)=15nL−10P = \dfrac{1}{f} = 10\left(\dfrac{1.5}{n_L} - 1\right) = \dfrac{15}{n_L} - 10 diopter.
  3. Values: P=5P = 5 at nL=1n_L = 1, P=0P = 0 at nL=1.5n_L = 1.5 (no refraction), P=−2.5P = -2.5 at nL=2n_L = 2. The 1/nL1/n_L dependence makes it a curve, concave upwards: graph (A).

    Why: When n_L > 1.5 the convex lens diverges, so P turns negative.

  4. (C) and (D) blow up at nL=1.5n_L = 1.5: they plot ff (which is infinite there), not PP. They are wrong.
  5. Why the key also accepts (B): the power of a lens in a medium is sometimes defined as P=nLfP = \dfrac{n_L}{f} (optical power measured in the medium). Then P=nL⋅10(1.5nL−1)=15−10nLP = n_L\cdot 10\left(\dfrac{1.5}{n_L} - 1\right) = 15 - 10n_L, a straight line from 55 to −5-5: graph (B).
AnswerAnswer: (A) P=15nL−10P = \dfrac{15}{n_L} - 10 (the provisional key accepts A or B; B follows from the definition P=nL/fP = n_L/f)
Ask about this question

Physics, Section 2: 4 questions, one or more options correct: +4 if all correct options are chosen; +3, +2 or +1 when only some correct options are chosen and no wrong one; 0 if unanswered; −1 in all other cases

Q5

Physics, Question 5 (4 marks)

Bohr model of the hydrogen atom · +4 / −1
Consider a hydrogen atom with vkv_k, rkr_k, and KkK_k denoting the velocity, orbital radius and kinetic energy of the electron in the kthk^{\text{th}} orbit, respectively. The electron undergoes a transition from the nthn^{\text{th}} orbit, emitting radiation corresponding to the Lyman series. Considering hh to be the Planck's constant and ϵ0\epsilon_0 the permittivity of the free space, the correct statement(s) is/are:
  1. (A)Magnitude of change in kinetic energy of electron can be expressed as h4π∣nvnrn−v1r1∣\dfrac{h}{4\pi}\left|\dfrac{nv_n}{r_n} - \dfrac{v_1}{r_1}\right|.
  2. (B)Magnitude of change in de Broglie wavelength of the electron can be expressed as e24ϵ0∣1Kn−1K1∣\dfrac{e^2}{4\epsilon_0}\left|\dfrac{1}{K_n} - \dfrac{1}{K_1}\right|.
  3. (C)Frequency of the radiation emitted can be expressed as e28πϵ0h(1r1−1rn)\dfrac{e^2}{8\pi\epsilon_0 h}\left(\dfrac{1}{r_1} - \dfrac{1}{r_n}\right).
  4. (D)Magnitude of change in total energy of the electron can be expressed as h2π∣v1r1−nvnrn∣\dfrac{h}{2\pi}\left|\dfrac{v_1}{r_1} - \dfrac{nv_n}{r_n}\right|.

Tests: Express Bohr-orbit kinetic energy, total energy, wavelength and frequency in terms of v, r and K.

Show solution
  1. Lyman series: the electron goes from orbit nn to orbit 1. Bohr's rule mvkrk=kh2πmv_kr_k = \dfrac{kh}{2\pi} gives m=kh2πvkrkm = \dfrac{kh}{2\pi v_kr_k}, so Kk=12mvk2=h4π⋅kvkrkK_k = \tfrac12 mv_k^2 = \dfrac{h}{4\pi}\cdot\dfrac{kv_k}{r_k}.
  2. (A) ∣Kn−K1∣=h4π∣nvnrn−v1r1∣|K_n - K_1| = \dfrac{h}{4\pi}\left|\dfrac{nv_n}{r_n} - \dfrac{v_1}{r_1}\right|. True.
  3. (D) In a Bohr orbit Ek=−KkE_k = -K_k, so ∣ΔE∣=∣ΔK∣=h4π∣…∣|\Delta E| = |\Delta K| = \dfrac{h}{4\pi}|\ldots|, not h2π∣…∣\dfrac{h}{2\pi}|\ldots|. False (twice too large).
  4. (C) Ek=−e28πϵ0rkE_k = -\dfrac{e^2}{8\pi\epsilon_0 r_k}, so hν=En−E1=e28πϵ0(1r1−1rn)h\nu = E_n - E_1 = \dfrac{e^2}{8\pi\epsilon_0}\left(\dfrac{1}{r_1} - \dfrac{1}{r_n}\right) and ν=e28πϵ0h(1r1−1rn)\nu = \dfrac{e^2}{8\pi\epsilon_0 h}\left(\dfrac{1}{r_1} - \dfrac{1}{r_n}\right). True.
  5. (B) λk=2πrkk\lambda_k = \dfrac{2\pi r_k}{k} (k wavelengths fit the orbit) and rk=e28πϵ0Kkr_k = \dfrac{e^2}{8\pi\epsilon_0 K_k}, so λk=e24ϵ0 kKk\lambda_k = \dfrac{e^2}{4\epsilon_0\,kK_k}. Then ∣Δλ∣=e24ϵ0∣1nKn−1K1∣|\Delta\lambda| = \dfrac{e^2}{4\epsilon_0}\left|\dfrac{1}{nK_n} - \dfrac{1}{K_1}\right|; the option misses the factor nn. False.
AnswerAnswer: (A), (C)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Projectile motion · +4 / −1
A particle is thrown with a speed vv from a point OO at an angle θ\theta with the horizontal plane such that it passes through the point PP at a height of 1 m and horizontal distance of 5 m from OO, as shown in the figure. If acceleration due to gravity is gg ms−2\text{ms}^{-2}, then the correct statement(s) is/are: (The figure shows OO on level ground, the launch velocity vv at angle θ\theta, and PP 1 m above the ground at a horizontal distance of 5 m.)
  1. (A)If θ=45∘\theta = 45^\circ, then v=5g2 ms−1v = \dfrac{5\sqrt{g}}{2}\ \text{ms}^{-1}.
  2. (B)If θ=45∘\theta = 45^\circ, the particle reaches its maximum height before it reaches PP.
  3. (C)If θ=30∘\theta = 30^\circ, the particle reaches its maximum height after reaching PP.
  4. (D)If θ=tan⁡−1(15)\theta = \tan^{-1}\left(\dfrac15\right), then v=125g ms−1v = 125\sqrt{g}\ \text{ms}^{-1}.

Tests: Use the trajectory equation to find launch speed and where the peak lies.

Show solution
  1. Trajectory: y=xtan⁡θ−gx22v2cos⁡2θy = x\tan\theta - \dfrac{gx^2}{2v^2\cos^2\theta}. At PP: 1=5tan⁡θ−25g2v2cos⁡2θ1 = 5\tan\theta - \dfrac{25g}{2v^2\cos^2\theta}.
  2. (A) θ=45∘\theta = 45^\circ: 1=5−25gv21 = 5 - \dfrac{25g}{v^2}, so v2=25g4v^2 = \dfrac{25g}{4} and v=5g2v = \dfrac{5\sqrt g}{2}. True.
  3. (B) The top is at x=v2sin⁡2θ2g=25g/42g=3.125x = \dfrac{v^2\sin 2\theta}{2g} = \dfrac{25g/4}{2g} = 3.125 m <5< 5 m: it peaks before PP. True.
  4. (C) θ=30∘\theta = 30^\circ: 25g2v2(3/4)=53−1=1.887\dfrac{25g}{2v^2(3/4)} = \dfrac{5}{\sqrt3} - 1 = 1.887, so v2=8.83gv^2 = 8.83g. Top at x=8.83gsin⁡60∘2g=3.8x = \dfrac{8.83g\sin 60^\circ}{2g} = 3.8 m <5< 5 m: it peaks before PP. False.
  5. (D) tan⁡θ=15\tan\theta = \tfrac15: the launch line itself passes through PP (5tan⁡θ=15\tan\theta = 1), so y(5)=1−25g2v2cos⁡2θ<1y(5) = 1 - \dfrac{25g}{2v^2\cos^2\theta} < 1 for every finite vv. No speed works. False.

    Why: Gravity always pulls the path below the straight launch line.

AnswerAnswer: (A), (B)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Thermodynamic cycles (efficiency) · +4 / −1
A quasi-static cycle of a monoatomic ideal gas contains an isothermal process (abab), followed by an isochoric process (bcbc) and an adiabatic process (caca) as shown in the figure. The volumes of the gas are V1V_1 and V2V_2 at aa and bb, respectively. If the cycle has heat input QinQ_{in} and output QoutQ_{out}, then the efficiency of the cycle is defined as η=Qin−QoutQin\eta = \dfrac{Q_{in} - Q_{out}}{Q_{in}}. The correct statement(s) is/are: [Given: ln⁡2≈0.7\ln 2 \approx 0.7] (The PP-VV figure shows aa at volume V1V_1, an isotherm falling to bb at V2V_2, a vertical drop at V2V_2 from bb down to cc, and a steeper adiabat from cc back up to aa.)
  1. (A)If V2/V1=8V_2/V_1 = 8, the heat released in the process bcbc is smaller than the heat absorbed in the process abab.
  2. (B)For a given value of V2/V1V_2/V_1, η\eta does not depend on the temperature of the isothermal process.
  3. (C)If V2/V1=8V_2/V_1 = 8, then the temperature of the gas at aa is 4 times the temperature of the gas at cc.
  4. (D)If V2/V1=8V_2/V_1 = 8, then the pressure of the gas at aa is 4 times the pressure of the gas at bb.

Tests: Find heats and temperature ratios in a cycle built from isothermal, isochoric and adiabatic steps.

Show solution
  1. Let the isotherm be at Ta=Tb=TT_a = T_b = T. Adiabat caca with γ=53\gamma = \tfrac53: TcV22/3=TV12/3T_c V_2^{2/3} = T V_1^{2/3}, so Tc=T(V1V2)2/3T_c = T\left(\dfrac{V_1}{V_2}\right)^{2/3}.
  2. (C) With V2/V1=8V_2/V_1 = 8: T=82/3Tc=4TcT = 8^{2/3}T_c = 4T_c. True.
  3. (A) Heat absorbed in abab: nRTln⁡8=3(0.7)nRT=2.1 nRTnRT\ln 8 = 3(0.7)nRT = 2.1\,nRT. Heat released in bcbc: 32nR(T−T4)=1.125 nRT\tfrac32 nR\left(T - \tfrac{T}{4}\right) = 1.125\,nRT. Released is smaller. True.
  4. (B) η=1−32nRT[1−(V1/V2)2/3]nRTln⁡(V2/V1)\eta = 1 - \dfrac{\tfrac32 nRT\left[1 - (V_1/V_2)^{2/3}\right]}{nRT\ln(V_2/V_1)}: TT cancels. True.

    Why: Both heats are proportional to T, so their ratio depends only on the volume ratio.

  5. (D) On the isotherm PaV1=PbV2P_aV_1 = P_bV_2, so Pa=8PbP_a = 8P_b, not 4Pb4P_b. False.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q8

Physics, Question 8 (4 marks)

Electromagnetic waves · +4 / −1
The electric field associated with an electromagnetic wave travelling in vacuum is given by E0sin⁡(3y+4z+ωt)i^E_0\sin(3y + 4z + \omega t)\hat i, where ω\omega is the angular frequency. All quantities are in SI units. The correct statement(s) about this wave is/are: [Given: speed of light in vacuum c=3×108 ms−1c = 3 \times 10^8\ \text{ms}^{-1}.]
  1. (A)The wave is travelling in −15(3j^+4k^)-\dfrac15(3\hat j + 4\hat k) direction.
  2. (B)The magnitude of the wave vector is 0.5 m−10.5\ \text{m}^{-1}.
  3. (C)The value of ω\omega is 1.5×109 rad s−11.5 \times 10^9\ \text{rad s}^{-1}.
  4. (D)The magnetic field associated with this wave is given by E0csin⁡(3y+4z+ωt)(4j^−3k^)\dfrac{E_0}{c}\sin(3y + 4z + \omega t)(4\hat j - 3\hat k).

Tests: Read propagation direction, wave number, frequency and B-field from a plane-wave expression.

Show solution
  1. The phase is k⃗⋅r⃗+ωt\vec k\cdot\vec r + \omega t with k⃗=3j^+4k^\vec k = 3\hat j + 4\hat k. A "+ωt" phase travels opposite to k⃗\vec k: direction −15(3j^+4k^)-\dfrac{1}{5}(3\hat j + 4\hat k). (A) True.

    Why: Constant phase means 3y + 4z decreases as t increases.

  2. (B) ∣k⃗∣=32+42=5 m−1|\vec k| = \sqrt{3^2 + 4^2} = 5\ \text{m}^{-1}, not 0.5. False.
  3. (C) ω=c∣k⃗∣=3×108×5=1.5×109 rad s−1\omega = c|\vec k| = 3 \times 10^8 \times 5 = 1.5 \times 10^9\ \text{rad s}^{-1}. True.
  4. (D) B⃗=1cn^×E⃗\vec B = \dfrac{1}{c}\hat n \times \vec E with n^=−3j^+4k^5\hat n = -\dfrac{3\hat j + 4\hat k}{5}: n^×i^=3k^−4j^5\hat n \times \hat i = \dfrac{3\hat k - 4\hat j}{5}, so B⃗=E05csin⁡(3y+4z+ωt)(3k^−4j^)\vec B = \dfrac{E_0}{5c}\sin(3y + 4z + \omega t)(3\hat k - 4\hat j).
  5. The option has the opposite sign and is 5 times too large (its amplitude would be 5E0/c5E_0/c, but ∣B⃗∣=E0/c|\vec B| = E_0/c). False.
AnswerAnswer: (A), (C)
Ask about this question

Physics, Section 3: 4 questions, numerical value (truncate or round off to two decimal places): +4 if correct, 0 in all other cases

Q9

Physics, Question 9 (4 marks)

Oscillations (rod in liquids, buoyancy torque) · +4
A tank contains two immiscible liquids of densities 6ρ6\rho and 2ρ2\rho. The higher density liquid is filled up to a height L/2L/2 from the bottom. A thin rod of density ρ\rho and length LL is fully immersed and hinged at the bottom so that it can oscillate freely, as shown in the figure. If the rod is slightly disturbed from its equilibrium, the time period of small oscillations is 2πnLg\dfrac{2\pi}{n}\sqrt{\dfrac{L}{g}}, where gg is the acceleration due to gravity. The value of nn is: (The figure shows the rod standing vertically from the hinge at the bottom of the tank; the lower half of its length is in the denser liquid, which fills the tank to height L/2L/2, and the upper half in the lighter liquid above.)

Tests: Find the period of a hinged rod when buoyancy from two liquids provides the restoring torque.

Show solution
  1. Let the rod have cross-section AA and turn through a small angle θ\theta about the hinge. Torques about the hinge are (force) × (height of its point of action) × sin⁡θ\sin\theta.
  2. Weight ρALg\rho ALg at L/2L/2 tips it over: −ρALg⋅L2sin⁡θ=−12ρAgL2sin⁡θ-\rho ALg\cdot\dfrac{L}{2}\sin\theta = -\dfrac12\rho AgL^2\sin\theta (restoring counted positive).
  3. Buoyancy on the lower half: 6ρAL2g6\rho A\dfrac{L}{2}g at L/4L/4, torque 34ρAgL2sin⁡θ\dfrac34\rho AgL^2\sin\theta. On the upper half: 2ρAL2g2\rho A\dfrac{L}{2}g at 3L/43L/4, torque 34ρAgL2sin⁡θ\dfrac34\rho AgL^2\sin\theta.

    Why: Buoyancy acts upward at the centre of each submerged part, so it pushes the rod back to vertical.

  4. Net restoring torque: (34+34−12)ρAgL2θ=ρAgL2θ\left(\dfrac34 + \dfrac34 - \dfrac12\right)\rho AgL^2\theta = \rho AgL^2\theta.
  5. I=ρAL⋅L23I = \dfrac{\rho AL\cdot L^2}{3}, so ω2=ρAgL2ρAL3/3=3gL\omega^2 = \dfrac{\rho AgL^2}{\rho AL^3/3} = \dfrac{3g}{L} and T=2π3LgT = \dfrac{2\pi}{\sqrt3}\sqrt{\dfrac{L}{g}}.
  6. n=3=1.73n = \sqrt3 = 1.73.
AnswerAnswer: 1.73
Ask about this question
Q10

Physics, Question 10 (4 marks)

Heat engines (Carnot engines in series) · +4
As shown in the figure, five Carnot engines, each with efficiency η\eta and same number of cycles per unit time, are operating between six heat reservoirs. The amount of heat released per cycle by one engine is completely absorbed by the next engine. Consider Q0Q_0 to be the amount of heat absorbed per cycle by the first engine and WW as the amount of total work done by all the engines per cycle, then the net efficiency of the system is found to be ηnet=WQ0=211243\eta_{net} = \dfrac{W}{Q_0} = \dfrac{211}{243}. The value of η\eta is: (The figure shows six reservoirs stacked one above another; engine 1 takes Q0Q_0 from the top one, does W1W_1 and passes Q1Q_1 to the next, engine 2 takes Q1Q_1, does W2W_2 and passes Q2Q_2, and so on down to engine 5, which takes Q4Q_4, does W5W_5 and rejects Q5Q_5 to the bottom reservoir.)

Tests: Combine efficiencies of engines in series using the heat passed from one to the next.

Show solution
  1. Each engine rejects a fraction 1−η1 - \eta of what it takes in: Qk=(1−η)Qk−1Q_k = (1-\eta)Q_{k-1}, so Q5=(1−η)5Q0Q_5 = (1-\eta)^5Q_0.
  2. Total work: W=Q0−Q5=Q0[1−(1−η)5]W = Q_0 - Q_5 = Q_0\left[1 - (1-\eta)^5\right].

    Why: Energy balance for the whole chain: heat in at the top minus heat out at the bottom.

  3. 1−(1−η)5=2112431 - (1-\eta)^5 = \dfrac{211}{243}, so (1−η)5=32243=(23)5(1-\eta)^5 = \dfrac{32}{243} = \left(\dfrac23\right)^5.
  4. 1−η=231 - \eta = \dfrac23, so η=13=0.33\eta = \dfrac13 = 0.33.
AnswerAnswer: 0.33
Ask about this question
Q11

Physics, Question 11 (4 marks)

Heat conduction (Newton-type cooling between two gases) · +4
As shown in the figure, an insulated container is fitted with a thermally conducting but immovable partition (P1P_1) and a freely movable but thermally insulated piston (P2P_2). The partition P1P_1 with thermal conductivity KK, cross sectional area AA and width xx divides the container into two sections, S1S_1 and S2S_2, each containing one mole of a monoatomic gas. The piston P2P_2 moves freely such that the gas in S2S_2 is always at the atmospheric pressure. Initially, the difference between the temperatures of S1S_1 and S2S_2 is ΔT0\Delta T_0. The time it takes for the temperature difference to become ΔT02\dfrac{\Delta T_0}{2} is nxR/KAnxR/KA, where RR is the universal gas constant. The value of nn is: [Given: ln⁡2≈0.7\ln 2 \approx 0.7] (The figure shows the container with S1S_1 on the left closed by the fixed wall, the partition P1P_1 of width xx in the middle, and S2S_2 on the right closed by the movable piston P2P_2.)

Tests: Set up the rate equation for a temperature difference when one gas is at constant volume and the other at constant pressure.

Show solution
  1. Heat current through the partition: H=KAxΔTH = \dfrac{KA}{x}\Delta T with ΔT=T1−T2\Delta T = T_1 - T_2.
  2. S1S_1 has fixed volume: CVdT1dt=−HC_V\dfrac{dT_1}{dt} = -H with CV=32RC_V = \tfrac32 R. S2S_2 stays at constant pressure: CPdT2dt=HC_P\dfrac{dT_2}{dt} = H with CP=52RC_P = \tfrac52 R.

    Why: S₂ expands against the free piston, so its heat capacity is C_P.

  3. d(ΔT)dt=−KAx(23R+25R)ΔT=−1615KAxRΔT\dfrac{d(\Delta T)}{dt} = -\dfrac{KA}{x}\left(\dfrac{2}{3R} + \dfrac{2}{5R}\right)\Delta T = -\dfrac{16}{15}\dfrac{KA}{xR}\Delta T.
  4. Exponential decay: ΔT\Delta T halves in t=1516xRKAln⁡2=15×0.716xRKA=0.65625xRKAt = \dfrac{15}{16}\dfrac{xR}{KA}\ln 2 = \dfrac{15 \times 0.7}{16}\dfrac{xR}{KA} = 0.65625\dfrac{xR}{KA}.
  5. n=0.65625≈0.66n = 0.65625 \approx 0.66 (0.65 if truncated; both are in the accepted range).
AnswerAnswer: 0.66
Ask about this question
Q12

Physics, Question 12 (4 marks)

Magnetic dipole moment (rotating charged cone) · +4
A hollow, right circular cone of base radius RR and height hh, with its tip at the origin is rotating about the ZZ-axis with an angular velocity ω\omega, as shown in the figure. The cone carries a total charge QQ uniformly distributed on its curved surface. The magnitude of magnetic field at a point (0,0,z)(0, 0, z), where z≫Rz \gg R and z≫hz \gg h, is nμ04πQR2ωz3\dfrac{n\mu_0}{4\pi}\dfrac{QR^2\omega}{z^3}. The value of nn is: (The figure shows the cone with its tip at the origin and its axis along +Z+Z, opening upward to a base of radius RR at height hh, spinning about ZZ.)

Tests: Find the magnetic moment of a spinning charged surface and use the far-field dipole formula.

Show solution
  1. Far away the cone acts as a magnetic dipole: on the axis B=μ04π2mz3B = \dfrac{\mu_0}{4\pi}\dfrac{2m}{z^3}. We need its moment mm.
  2. Let the slant length be ss and σ=QπRs\sigma = \dfrac{Q}{\pi Rs}. A ring at slant distance ℓ\ell from the tip has radius r=Rℓsr = \dfrac{R\ell}{s} and charge dq=σ 2πr dℓdq = \sigma\,2\pi r\,d\ell.
  3. It carries current dI=dq ω2π=σωr dℓdI = \dfrac{dq\,\omega}{2\pi} = \sigma\omega r\,d\ell and moment dm=dI πr2=πσωR3s3ℓ3 dℓdm = dI\,\pi r^2 = \pi\sigma\omega\dfrac{R^3}{s^3}\ell^3\,d\ell.
  4. m=πσωR3s3⋅s44=πσωR3s4=QωR24m = \pi\sigma\omega\dfrac{R^3}{s^3}\cdot\dfrac{s^4}{4} = \dfrac{\pi\sigma\omega R^3s}{4} = \dfrac{Q\omega R^2}{4}.

    Why: Equivalently m = Qω⟨r²⟩/2 with ⟨r²⟩ = R²/2 on the cone's surface.

  5. B=μ04π2z3⋅QωR24=0.5 μ04πQR2ωz3B = \dfrac{\mu_0}{4\pi}\dfrac{2}{z^3}\cdot\dfrac{Q\omega R^2}{4} = \dfrac{0.5\,\mu_0}{4\pi}\dfrac{QR^2\omega}{z^3}, so n=0.5n = 0.5.
AnswerAnswer: 0.5
Ask about this question

Physics, Section 4: 4 List-I / List-II matching questions, only one option correct: +4 if correct, −1 if wrong, 0 if unanswered

Q13

Physics, Question 13 (4 marks)

Interference of sound (path difference in tubes) · +4 / −1
List-I shows four configurations made of straight and semi-circular narrow tubes containing air. A sound wave of wavelength λ=0.29\lambda = 0.29 m enters these structures at the point SS and a sound detector is placed at DD. Between the points SS and DD, the sound travels only through the tubes. List-II contains the possible smallest values of ll (refer to the figures) for which the detector DD records maximum amplitude. Ignore effects of sharp corners. [Given cos⁡(15∘)=0.97\cos(15^\circ) = 0.97] Choose the option that best describes the match between the entries in List-I to those in List-II. (In every figure a straight tube of length ll joins SS to DD along the bottom, and a second tube joins them over the top.)
List-IList-II
(P) Upper tube: a semicircle of radius 0.5l0.5l standing on SDSD(1) 1.32 m
(Q) Upper tube: up 0.5l0.5l, across ll, down 0.5l0.5l (a rectangle on SDSD)(2) 1.19 m
(R) Upper tube: straight up ll from SS, then a semicircle whose diameter is the diagonal from that top point to DD (length 2 l\sqrt2\,l), bulging outward(3) 0.51 m
(S) Upper tube: two sides of a triangle on SDSD, with angle 45∘45^\circ at SS and 105∘105^\circ at the top vertex(4) 0.29 m
(5) 0.13 m
  1. (A)P →\rightarrow 4, Q →\rightarrow 3, R →\rightarrow 5, S →\rightarrow 1
  2. (B)P →\rightarrow 4, Q →\rightarrow 3, R →\rightarrow 1, S →\rightarrow 5
  3. (C)P →\rightarrow 3, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 2
  4. (D)P →\rightarrow 3, Q →\rightarrow 4, R →\rightarrow 5, S →\rightarrow 2

Tests: Set the path difference between two tubes equal to one wavelength for constructive interference.

Show solution
  1. The two paths meet at DD; maximum amplitude needs path difference mλm\lambda. The smallest non-zero ll has path difference exactly λ=0.29\lambda = 0.29 m.
  2. (P) Upper =π(0.5l)= \pi(0.5l), lower =l= l: Δ=(π2−1)l=0.571l=0.29\Delta = (\tfrac{\pi}{2} - 1)l = 0.571l = 0.29, so l=0.51l = 0.51 m: (3).
  3. (Q) Upper =0.5l+l+0.5l=2l= 0.5l + l + 0.5l = 2l: Δ=l=0.29\Delta = l = 0.29 m: (4).
  4. (R) Upper =l+π2 l2=l+2.221l= l + \pi\dfrac{\sqrt2\,l}{2} = l + 2.221l: Δ=2.221l=0.29\Delta = 2.221l = 0.29, so l=0.13l = 0.13 m: (5).
  5. (S) The third angle is 30∘30^\circ. Sine rule with sin⁡105∘=cos⁡15∘=0.97\sin 105^\circ = \cos 15^\circ = 0.97: sides lsin⁡30∘0.97+lsin⁡45∘0.97=1.207l0.97=1.244l\dfrac{l\sin 30^\circ}{0.97} + \dfrac{l\sin 45^\circ}{0.97} = \dfrac{1.207l}{0.97} = 1.244l.
  6. So Δ=0.244l=0.29\Delta = 0.244l = 0.29, l=1.19l = 1.19 m: (2).
AnswerAnswer: (D) P →\rightarrow 3, Q →\rightarrow 4, R →\rightarrow 5, S →\rightarrow 2
Ask about this question
Q14

Physics, Question 14 (4 marks)

Wave optics and atmospheric optics · +4 / −1
In the List-I, four optical effects are mentioned. The physical phenomena of light which are essential to describe these optical effects are given in List-II. Choose the option which describes the correct match between the entries in List-I to those in List-II.
List-IList-II
(P) Colorful sky in north polar region (Aurora Borealis)(1) Dispersion and reflection
(Q) Partially polarized sun light(2) Total internal reflection
(R) Rainbow(3) Diffraction
(S) Dark and bright fringes(4) Scattering of light by molecules in the atmosphere
(5) Emission of radiation from oxygen and nitrogen atoms excited by charged particles
  1. (A)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 3
  2. (B)P →\rightarrow 4, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 3
  3. (C)P →\rightarrow 4, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 3
  4. (D)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 2

Tests: Link everyday optical effects to the physics behind them.

Show solution
  1. (P) The aurora is light emitted by oxygen and nitrogen atoms excited by charged particles from the Sun, steered in by Earth's magnetic field: (5).
  2. (Q) Skylight is partially polarised because light scattered by air molecules at about 90∘90^\circ is polarised: (4).
  3. (R) A rainbow comes from dispersion on entering a raindrop and reflection inside it: (1). (The internal reflection is not total.)
  4. (S) Dark and bright fringes are a wave effect; of the List-II entries only diffraction produces them: (3).
AnswerAnswer: (A) P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 3
Ask about this question
Q15

Physics, Question 15 (4 marks)

Electromagnetic induction (rotating loops, half-plane field) · +4 / −1
List-I contains four conducting loops lying in the XYXY plane, as shown in the figures. The loops are rotating about ZZ axis passing through the point OO with time period TT in clockwise direction. The region x>0x > 0 contains a uniform magnetic field BB in the +z+z direction. List-II contains the qualitative variation of the induced current i(t)i(t) for each of these loops. Choose the option which describes the correct match between the entries in List-I to those in List-II. (At t=0t = 0 each loop is drawn against the yy-axis with the field filling x>0x > 0; angles are measured anticlockwise from +x+x.)
List-IList-II
(P) A semicircle in x<0x < 0 with its diameter on the yy-axis, centre OO(1) ii positive and constant from 00 to T/6T/6, zero to T/2T/2, negative from T/2T/2 to 2T/32T/3, zero to TT
(Q) Two 60∘60^\circ sectors of the same circle centred at OO, between 90∘90^\circ and 150∘150^\circ and between 210∘210^\circ and 270∘270^\circ, joined at OO (a semicircle with its middle 60∘60^\circ cut out)(2) ii positive on 00 to T/6T/6 and T/3T/3 to T/2T/2, zero between; negative on T/2T/2 to 2T/32T/3 and 5T/65T/6 to TT, zero between
(R) One 60∘60^\circ sector between 90∘90^\circ and 150∘150^\circ, vertex at OO(3) ii positive and constant from 00 to T/2T/2, negative and constant from T/2T/2 to TT
(S) Two 60∘60^\circ sectors, one between 30∘30^\circ and 90∘90^\circ (in the field) and one between 210∘210^\circ and 270∘270^\circ, the wire crossing itself at OO(4) i=0i = 0 at all times
(5) ii growing linearly from 00 to T/2T/2, then jumping to a negative value and growing more negative linearly up to TT
  1. (A)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 1, S →\rightarrow 3
  2. (B)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 5, S →\rightarrow 4
  3. (C)P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 4
  4. (D)P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 2, S →\rightarrow 3

Tests: Track how the area of a rotating loop inside a half-plane field changes to get the induced current.

Show solution
  1. Flux =B×= B \times (area of the loop inside x>0x > 0). For sectors of radius aa about OO, a part of angular width ϕ\phi inside the field has area 12a2ϕ\tfrac12 a^2\phi, so while a boundary radius sweeps across the yy-axis the flux changes at a constant rate: ∣ε∣=12Ba2ω|\varepsilon| = \tfrac12 Ba^2\omega, a constant current. When nothing crosses, i=0i = 0.
  2. (P) After turning θ\theta, the part in the field is a sector of angle θ\theta (for 0<θ<π0 < \theta < \pi), then it shrinks for π<θ<2π\pi < \theta < 2\pi. Flux rises linearly then falls linearly: constant +i+i then constant −i-i: (3).
  3. (R) The sector enters in 0<t<T/60 < t < T/6 (flux rising), stays fully inside until T/2T/2, leaves in T/2<t<2T/3T/2 < t < 2T/3, then stays out: (1).
  4. (Q) The upper sector enters (00 to T/6T/6), nothing crosses (T/6T/6 to T/3T/3), the lower sector enters (T/3T/3 to T/2T/2); then the upper leaves (T/2T/2 to 2T/32T/3), a pause, the lower leaves (5T/65T/6 to TT): (2).
  5. (S) The wire crosses at OO, so both lobes are circulated in the same sense and their fluxes add. The lobes are diametrically opposite, and of any two opposite directions exactly one lies in x>0x > 0, so the area inside the field is always one 60∘60^\circ sector. Flux constant, i=0i = 0: (4).

    Why: Graph (5), a linearly growing current, would need a flux growing like t², which none of these shapes gives.

AnswerAnswer: (C) P →\rightarrow 3, Q →\rightarrow 2, R →\rightarrow 1, S →\rightarrow 4
Ask about this question
Q16

Physics, Question 16 (4 marks)

Moment of inertia (rods about an in-plane axis) · +4 / −1
List-I shows four planar structures made of uniform solid rods each of mass mm and length ll. In the List-II the possible moment of inertia of these structures about an axis OCO′OCO', which lies in the plane of the structures, are given. Choose the option that describes the correct match between the entries in List-I to those in List-II.
List-IList-II
(P) Two rods CACA and CBCB at 90∘90^\circ, joined at CC; the axis passes through CC at 45∘45^\circ to each rod(1) 54ml2\dfrac54 ml^2
(Q) An equilateral triangle ABCABC of three rods; the axis passes through vertex CC parallel to ABAB (each of CACA, CBCB makes 60∘60^\circ with it)(2) 16ml2\dfrac16 ml^2
(R) A square ABCDABCD of four rods; the axis is the diagonal through CC and AA(3) 112ml2\dfrac{1}{12} ml^2
(S) Two rods CACA and CBCB joined at CC, each at 30∘30^\circ to the axis, which passes through CC and bisects the angle between them(4) 23ml2\dfrac23 ml^2
(5) 13ml2\dfrac13 ml^2
  1. (A)P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 2
  2. (B)P →\rightarrow 1, Q →\rightarrow 3, R →\rightarrow 4, S →\rightarrow 2
  3. (C)P →\rightarrow 5, Q →\rightarrow 3, R →\rightarrow 2, S →\rightarrow 1
  4. (D)P →\rightarrow 5, Q →\rightarrow 4, R →\rightarrow 2, S →\rightarrow 1

Tests: Find the moment of inertia of a rod inclined to an axis through one end, and add rods.

Show solution
  1. A rod of length ll with one end on the axis, at angle α\alpha to it: each element at distance xx along the rod is xsin⁡αx\sin\alpha from the axis, so I=ml23sin⁡2αI = \dfrac{ml^2}{3}\sin^2\alpha.
  2. (P) Two rods at 45∘45^\circ: 2×ml23⋅12=13ml22 \times \dfrac{ml^2}{3}\cdot\dfrac12 = \dfrac13 ml^2: (5).
  3. (Q) CACA and CBCB at 60∘60^\circ: 2×ml23⋅34=12ml22 \times \dfrac{ml^2}{3}\cdot\dfrac34 = \dfrac12 ml^2. ABAB is parallel to the axis at distance lsin⁡60∘l\sin 60^\circ: m⋅34l2m\cdot\dfrac34 l^2. Total 54ml2\dfrac54 ml^2: (1).

    Why: Every point of AB is the same distance from the axis.

  4. (R) All four sides make 45∘45^\circ with the diagonal and each has one end on it (CC or AA): 4×ml26=23ml24 \times \dfrac{ml^2}{6} = \dfrac23 ml^2: (4).
  5. (S) Two rods at 30∘30^\circ: 2×ml23⋅14=16ml22 \times \dfrac{ml^2}{3}\cdot\dfrac14 = \dfrac16 ml^2: (2).
AnswerAnswer: (A) P →\rightarrow 5, Q →\rightarrow 1, R →\rightarrow 4, S →\rightarrow 2
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Thermodynamics (work in irreversible processes) · +3 / −1
An ideal gas (0.5 mol), initially at 2 bar pressure, is compressed at a constant temperature of 600 K in two steps: first, against a constant external pressure of PP bar (2<P<82 < P < 8), and then against constant external pressure of 8 bar. At each step, the compression is stopped only when the pressure of the gas becomes equal to the external pressure. The total work done on the gas in these steps is WW. Considering all possible values of PP (2<P<82 < P < 8) and taking the gas constant as RR (in J K−1 mol−1\mathrm{J\,K^{-1}\,mol^{-1}}), the minimum value of ∣W∣|W| (in J) is
  1. (A)207R207R
  2. (B)600R600R
  3. (C)630R630R
  4. (D)900R900R

Tests: Work done on an ideal gas in multi-step irreversible isothermal compression, and choosing the step pressure to minimise it.

Show solution
  1. Isothermal ideal gas: V=nRTpV = \dfrac{nRT}{p} with nRT=0.5×600 R=300RnRT = 0.5 \times 600\,R = 300R. Volumes: V1=nRT2V_1 = \dfrac{nRT}{2}, V2=nRTPV_2 = \dfrac{nRT}{P}, V3=nRT8V_3 = \dfrac{nRT}{8}.
  2. Each step is against a constant external pressure, so work on the gas =pext(Vstart−Vend)= p_{ext}(V_{start} - V_{end}). Step 1: P(nRT2−nRTP)=nRT(P2−1)P\left(\dfrac{nRT}{2} - \dfrac{nRT}{P}\right) = nRT\left(\dfrac{P}{2} - 1\right).

    Why: Pressure units cancel: only pressure ratios appear.

  3. Step 2: 8(nRTP−nRT8)=nRT(8P−1)8\left(\dfrac{nRT}{P} - \dfrac{nRT}{8}\right) = nRT\left(\dfrac{8}{P} - 1\right). Total: W=nRT(P2+8P−2)W = nRT\left(\dfrac{P}{2} + \dfrac{8}{P} - 2\right).
  4. Minimise f(P)=P2+8Pf(P) = \dfrac{P}{2} + \dfrac{8}{P}: f′(P)=12−8P2=0⇒P=4f'(P) = \dfrac{1}{2} - \dfrac{8}{P^2} = 0 \Rightarrow P = 4 bar (the geometric mean of 2 and 8), which lies in 2<P<82 < P < 8.

    Why: By AM-GM, P/2 + 8/P is least when the two terms are equal.

  5. Wmin=300R (2+2−2)=600RW_{min} = 300R\,(2 + 2 - 2) = 600R J.
AnswerAnswer: (B) 600R600R
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Chemical kinetics (reversible first-order reactions) · +3 / −1
For a reversible reaction R⇌P\mathbf{R} \rightleftharpoons \mathbf{P}, at constant temperature, both the forward and the backward reactions are first order elementary reactions with rate constants kfk_f and kbk_b, respectively. At time zero, the concentration of R is [R]0[\mathbf{R}]_0 and the concentration of P is zero. At any given time, [R][\mathbf{R}] and [P][\mathbf{P}] are the concentrations of R and P, respectively. If kb=4kfk_b = 4k_f, the correct graphical representation of the reaction is (Each option is a graph of concentration ratio, 0 to 1, against time, with [R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 dashed and [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 solid.)
  1. (A)[R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 falls from 1 and levels off at 0.5; [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 rises from 0 and levels off at 0.5.
  2. (B)[R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 falls steeply from 1 and levels off at 0.2; [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 rises steeply from 0 and levels off at 0.8.
  3. (C)[R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 falls quickly from 1 and levels off at 0.8; [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 rises quickly from 0 and levels off at 0.2.
  4. (D)[R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 keeps falling from 1 towards 0; [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 keeps rising from 0 to 1 (the curves cross near 0.4), with no plateau.

Tests: Equilibrium composition of a reversible first-order reaction from the ratio of its rate constants.

Show solution
  1. A reversible reaction does not go to completion: both curves level off at equilibrium, which rules out (D).
  2. At equilibrium the forward and backward rates are equal: kf[R]eq=kb[P]eqk_f[\mathbf{R}]_{eq} = k_b[\mathbf{P}]_{eq}, so K=[P]eq[R]eq=kfkb=14K = \dfrac{[\mathbf{P}]_{eq}}{[\mathbf{R}]_{eq}} = \dfrac{k_f}{k_b} = \dfrac{1}{4}.
  3. Mass balance: [R]+[P]=[R]0[\mathbf{R}] + [\mathbf{P}] = [\mathbf{R}]_0. With [P]eq=14[R]eq[\mathbf{P}]_{eq} = \tfrac14[\mathbf{R}]_{eq}: [R]eq=0.8[R]0[\mathbf{R}]_{eq} = 0.8[\mathbf{R}]_0 and [P]eq=0.2[R]0[\mathbf{P}]_{eq} = 0.2[\mathbf{R}]_0.
  4. So [R]/[R]0[\mathbf{R}]/[\mathbf{R}]_0 levels off at 0.8 and [P]/[R]0[\mathbf{P}]/[\mathbf{R}]_0 at 0.2, approached exponentially with rate constant kf+kbk_f + k_b. That is graph (C).

    Why: (A) would need kf = kb; (B) would need kf = 4kb.

AnswerAnswer: (C) [R]/[R]0→0.8[\mathbf{R}]/[\mathbf{R}]_0 \rightarrow 0.8, [P]/[R]0→0.2[\mathbf{P}]/[\mathbf{R}]_0 \rightarrow 0.2
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Chemical bonding (dipole moment) · +3 / −1
The correct order of dipole moments for the given species is
  1. (A)BF3=NH4+<NF3<NH3\mathrm{BF_3 = NH_4^+ < NF_3 < NH_3}
  2. (B)BF3<NH4+<NF3<NH3\mathrm{BF_3 < NH_4^+ < NF_3 < NH_3}
  3. (C)NH4+<BF3<NH3<NF3\mathrm{NH_4^+ < BF_3 < NH_3 < NF_3}
  4. (D)BF3<NH4+<NH3<NF3\mathrm{BF_3 < NH_4^+ < NH_3 < NF_3}

Tests: Compare dipole moments from molecular shape and the direction of bond and lone-pair moments.

Show solution
  1. BF3\mathrm{BF_3} is trigonal planar and NH4+\mathrm{NH_4^+} is regular tetrahedral: the bond moments cancel by symmetry, so both have zero dipole moment. Hence BF3=NH4+\mathrm{BF_3 = NH_4^+}.
  2. NH3\mathrm{NH_3} and NF3\mathrm{NF_3} are both pyramidal with one lone pair on N. In NH3\mathrm{NH_3} the N–H bond moments point towards N (N is more electronegative), the same way as the lone-pair moment: they add, μ≈1.47\mu \approx 1.47 D.
  3. In NF3\mathrm{NF_3} the N–F bond moments point away from N, opposite to the lone-pair moment: they largely cancel, μ≈0.23\mu \approx 0.23 D.

    Why: F is more electronegative than N, so the bond dipoles reverse.

  4. Order: BF3=NH4+(0)<NF3<NH3\mathrm{BF_3 = NH_4^+ (0) < NF_3 < NH_3}, option (A).
AnswerAnswer: (A) BF3=NH4+<NF3<NH3\mathrm{BF_3 = NH_4^+ < NF_3 < NH_3}
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Stereochemistry (diastereomers, chemoselective reduction) · +3 / −1
Considering LiBH4\mathrm{LiBH_4} reduces an ester group to the corresponding alcohol and does not reduce a carboxylic acid group, the correct statement about the major products P, Q, R and S is (The figure shows two starting materials. Top: a cyclobutane whose ring carbon C1 carries both a CH2CO2Et\mathrm{CH_2CO_2Et} group (wedge) and a CH2CO2H\mathrm{CH_2CO_2H} group (hashed), and whose neighbouring ring carbon C2 carries a CH3\mathrm{CH_3} (wedge). It gives P with 1. LiBH4\mathrm{LiBH_4}, 2. H+\mathrm{H^+}, and Q with 1. BH3\mathrm{BH_3}, 2. H+\mathrm{H^+}. Bottom: the same, but the CH3\mathrm{CH_3} (wedge) is on C3, the ring carbon opposite C1. It gives R with 1. LiBH4\mathrm{LiBH_4}, 2. H+\mathrm{H^+}, and S with 1. BH3\mathrm{BH_3}, 2. H+\mathrm{H^+}.)
  1. (A)P & Q are identical, and R & S are diastereomers.
  2. (B)P & Q are diastereomers, and R & S are identical.
  3. (C)P & Q are diastereomers, and R & S are diastereomers.
  4. (D)P & Q are identical, and R & S are identical.

Tests: Chemoselective reduction (LiBH4 vs BH3), lactonisation and recognising diastereomers in substituted cyclobutanes.

Show solution
  1. LiBH4\mathrm{LiBH_4} reduces only the ester: the wedge arm becomes CH2CH2OH\mathrm{CH_2CH_2OH}, the hashed arm stays CH2CO2H\mathrm{CH_2CO_2H}. BH3\mathrm{BH_3} reduces only the acid: the hashed arm becomes CH2CH2OH\mathrm{CH_2CH_2OH}, the wedge arm stays CH2CO2Et\mathrm{CH_2CO_2Et}.

    Why: BH3 reduces acids faster than esters; LiBH4 is the reverse.

  2. In each case C1 now carries a CH2CH2OH\mathrm{CH_2CH_2OH} and a CH2C(=O)X\mathrm{CH_2C(=O)X} arm. In the acid work-up the OH closes onto the acid (or, by transesterification, the ester, losing EtOH) to give a six-membered δ-lactone spiro-fused at C1: C1−CH2−C(=O)−O−CH2−CH2−C1\mathrm{C1{-}CH_2{-}C(=O){-}O{-}CH_2{-}CH_2{-}C1}. So all four products are the same spiro lactone skeleton.

    Why: A 1,5-relationship between OH and C=O closes a strain-free six-membered ring.

  3. The difference is which face the C=O arm sits on. From the LiBH4 route the C=O arm is on the hashed face; from the BH3 route it is on the wedge face. So the two products are the spiro lactone with C1 configured oppositely.
  4. P vs Q (methyl on C2): both C1 (spiro) and C2 are stereocentres. Only C1 is inverted, C2 is the same, so P and Q are stereoisomers that are not mirror images: diastereomers.
  5. R vs S (methyl on C3): the molecule has a mirror plane through C1, C3 and the lactone ring, so neither is chiral, but the lactone C=O arm is cis to the CH3\mathrm{CH_3} in one and trans in the other: cis/trans isomers, i.e. diastereomers.
  6. Both pairs are diastereomers: option (C).
AnswerAnswer: (C) P & Q are diastereomers, and R & S are diastereomers.
Ask about this question

Chemistry, Section 2: 4 questions, one or more options correct: +4 if all the correct options are chosen; +3 if all four are correct but only three are chosen; +2 if three or more are correct but only two are chosen, both correct; +1 if two or more are correct but only one is chosen and it is correct; 0 if unanswered; −1 in all other cases

Q5

Chemistry, Question 5 (4 marks)

Atomic structure (orbital energies) · +4 / −1
The 2s and the 2p orbital energies of hydrogen atom are E2s(H)E_{2s}(\mathrm{H}) and E2p(H)E_{2p}(\mathrm{H}), respectively. The 2s and the 2p orbital energies of lithium atom are E2s(Li)E_{2s}(\mathrm{Li}) and E2p(Li)E_{2p}(\mathrm{Li}), respectively. The correct option(s) about the orbital energies is(are)
  1. (A)E2s(Li)<E2p(Li)E_{2s}(\mathrm{Li}) < E_{2p}(\mathrm{Li})
  2. (B)E2s(H)=E2p(H)E_{2s}(\mathrm{H}) = E_{2p}(\mathrm{H})
  3. (C)E2p(H)<E2s(Li)E_{2p}(\mathrm{H}) < E_{2s}(\mathrm{Li})
  4. (D)E2s(H)>E2s(Li)E_{2s}(\mathrm{H}) > E_{2s}(\mathrm{Li})

Tests: How orbital energies depend on n alone in hydrogen but on n and l in many-electron atoms.

Show solution
  1. Hydrogen (one electron): energy depends only on nn: En=−13.6n2E_n = -\dfrac{13.6}{n^2} eV, so E2s(H)=E2p(H)=−3.4E_{2s}(\mathrm{H}) = E_{2p}(\mathrm{H}) = -3.4 eV. (B) true.
  2. Lithium (many electrons): the 2s electron penetrates the 1s core more than 2p, feels a larger effective nuclear charge and lies lower: E2s(Li)<E2p(Li)E_{2s}(\mathrm{Li}) < E_{2p}(\mathrm{Li}). (A) true.
  3. E2s(Li)≈−5.39E_{2s}(\mathrm{Li}) \approx -5.39 eV (minus Li's first ionisation energy), lower than E2s(H)=−3.4E_{2s}(\mathrm{H}) = -3.4 eV, because Li's 2s electron feels Zeff≈1.26>1Z_{eff} \approx 1.26 > 1. So E2s(H)>E2s(Li)E_{2s}(\mathrm{H}) > E_{2s}(\mathrm{Li}). (D) true.
  4. (C) says E2p(H)=−3.4E_{2p}(\mathrm{H}) = -3.4 eV is below E2s(Li)=−5.39E_{2s}(\mathrm{Li}) = -5.39 eV: it is above. (C) false.
AnswerAnswer: (A), (B), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

p-Block elements (halogens and interhalogens) · +4 / −1
Correct statement(s) about the compounds X, Y and Z is(are): MnO2\mathrm{MnO_2} + Conc. HCl →\rightarrow MnCl2\mathrm{MnCl_2} + X (greenish yellow gas) + H2O\mathrm{H_2O}; NH3\mathrm{NH_3} + X (excess) →\rightarrow Y + HCl; X + F2\mathrm{F_2} (excess) →573 K\xrightarrow{573\ \mathrm{K}} Z
  1. (A)X is used for sterilizing drinking water.
  2. (B)Y has a planar structure.
  3. (C)Z is used in the enrichment of 235U^{235}\mathrm{U}.
  4. (D)Y is a stronger Lewis base than ammonia.

Tests: Preparation and reactions of chlorine: NCl3 from excess chlorine and ClF3 from excess fluorine, and their uses and shapes.

Show solution
  1. MnO2+4HCl→MnCl2+Cl2+2H2O\mathrm{MnO_2 + 4HCl \rightarrow MnCl_2 + Cl_2 + 2H_2O}: X = Cl2\mathrm{Cl_2}, the greenish-yellow gas.
  2. With excess chlorine every N–H is replaced: NH3+3Cl2→NCl3+3HCl\mathrm{NH_3 + 3Cl_2 \rightarrow NCl_3 + 3HCl}, so Y = NCl3\mathrm{NCl_3}. With excess F2\mathrm{F_2} at 573 K: Cl2+3F2→2ClF3\mathrm{Cl_2 + 3F_2 \rightarrow 2ClF_3}, so Z = ClF3\mathrm{ClF_3}.

    Why: Excess NH3 would instead give N2 and NH4Cl.

  3. (A) true: chlorine is used to disinfect (sterilise) drinking water.
  4. (B) false: NCl3\mathrm{NCl_3} has N with three bond pairs and one lone pair (sp3sp^3): trigonal pyramidal, like NH3\mathrm{NH_3}.
  5. (C) true: ClF3\mathrm{ClF_3} fluorinates uranium to UF6\mathrm{UF_6} (U+3ClF3→UF6+3ClF\mathrm{U + 3ClF_3 \rightarrow UF_6 + 3ClF}), the volatile compound used to separate 235U^{235}\mathrm{U} from 238U^{238}\mathrm{U}.
  6. (D) false: the three electronegative Cl atoms pull electron density from N's lone pair, so NCl3\mathrm{NCl_3} is a much weaker Lewis base than NH3\mathrm{NH_3}.
AnswerAnswer: (A), (C)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

Noble gases and MO theory (O2+ PtF6−) · +4 / −1
Reaction of PtF6\mathrm{PtF_6} with oxygen (O2\mathrm{O_2}) gas results in the formation of an ionic compound, X+Y−\mathbf{X}^+\mathbf{Y}^-. Correct statement(s) is(are)
  1. (A)The bond order of X+\mathbf{X}^+ is 1.5.
  2. (B)Valence dd-orbitals of the metal ion in X+Y−\mathbf{X}^+\mathbf{Y}^- has 5 electrons.
  3. (C)PtF6\mathrm{PtF_6} acts as an oxidant in this reaction.
  4. (D)PtF6\mathrm{PtF_6} acts as a fluorinating agent in this reaction.

Tests: Identify the O2+[PtF6]− salt, the bond order of O2+ and the oxidation state of Pt.

Show solution
  1. O2+PtF6→O2+[PtF6]−\mathrm{O_2 + PtF_6 \rightarrow O_2^+[PtF_6]^-} (dioxygenyl hexafluoroplatinate, Bartlett's reaction that led to Xe+[PtF6]−\mathrm{Xe^+[PtF_6]^-}). So X+=O2+\mathbf{X}^+ = \mathrm{O_2^+}, Y−=[PtF6]−\mathbf{Y}^- = \mathrm{[PtF_6]^-}.
  2. (A) false: O2+\mathrm{O_2^+} has 15 electrons; removing one electron from a π∗\pi^* orbital of O2\mathrm{O_2} (bond order 2) gives bond order 10−52=2.5\dfrac{10 - 5}{2} = 2.5.
  3. (B) true: in [PtF6]−\mathrm{[PtF_6]^-}, Pt is +5. Pt is [Xe]4f145d96s1[\mathrm{Xe}]4f^{14}5d^96s^1, so Pt5+\mathrm{Pt^{5+}} is 5d55d^5: 5 valence d-electrons.
  4. (C) true: PtF6\mathrm{PtF_6} takes an electron from O2\mathrm{O_2} (Pt: +6 to +5), so it is the oxidant.
  5. (D) false: no fluorine is transferred to oxygen (no O–F bond forms); the product is a salt of O2+\mathrm{O_2^+}, so PtF6\mathrm{PtF_6} acts only as an electron acceptor here.
AnswerAnswer: (B), (C)
Ask about this question
Q8

Chemistry, Question 8 (4 marks)

Aldehydes, ketones and carboxylic acids (synthesis sequence) · +4 / −1
In the following reaction sequence, Q, R, S and T are the major products. (The scheme: sodium butanoate, CH3CH2CH2COONa\mathrm{CH_3CH_2CH_2COONa}, treated with 1. Kolbe's electrolysis, 2. V2O5\mathrm{V_2O_5}, 500 °C, 10–20 atm, gives Q; Q + phthalic anhydride →anhyd. AlCl3\xrightarrow{\text{anhyd. } \mathrm{AlCl_3}} R; R →1. PCl5; 2. H2−Pd/BaSO4\xrightarrow{\text{1. } \mathrm{PCl_5}\text{; 2. } \mathrm{H_2{-}Pd/BaSO_4}} S; S →NH2NH2, heat\xrightarrow{\mathrm{NH_2NH_2},\ \text{heat}} T.) The correct statement(s) about Q, R, S and T is(are)
  1. (A)S on warming with ammoniacal AgNO3\mathrm{AgNO_3} results in the formation of silver mirror.
  2. (B)Q on treatment with Cl2\mathrm{Cl_2}(excess)/UV gives gammaxane.
  3. (C)T is a heterocyclic compound.
  4. (D)R on acid catalyzed intramolecular cyclization followed by treatment with Zn-Hg/HCl gives 9,10-dihydroxyanthracene.

Tests: Follow a multistep sequence: Kolbe electrolysis, aromatisation, Friedel–Crafts with phthalic anhydride, Rosenmund reduction and hydrazine condensation.

Show solution
  1. Kolbe electrolysis couples two propyl radicals: 2CH3CH2CH2COO−→CH3(CH2)4CH3+2CO2\mathrm{2CH_3CH_2CH_2COO^- \rightarrow CH_3(CH_2)_4CH_3 + 2CO_2}, n-hexane. Over V2O5\mathrm{V_2O_5} at about 773 K and 10–20 atm, n-hexane is cyclised and dehydrogenated (aromatisation): Q = benzene.
  2. Friedel–Crafts acylation of benzene by phthalic anhydride opens the anhydride: R = 2-benzoylbenzoic acid, C6H5CO−C6H4−COOH\mathrm{C_6H_5CO{-}C_6H_4{-}COOH} (ortho).
  3. PCl5\mathrm{PCl_5} turns the COOH into COCl; Rosenmund reduction (H2\mathrm{H_2}, Pd/BaSO4\mathrm{BaSO_4}) gives the aldehyde: S = 2-benzoylbenzaldehyde. Hydrazine condenses with both ortho carbonyls (CHO and C=O) to close a ring with N–N: T = 1-phenylphthalazine.
  4. (A) true: S has a CHO group, so Tollens' reagent gives a silver mirror.
  5. (B) true: benzene adds 3Cl2\mathrm{3Cl_2} under UV to give benzene hexachloride, C6H6Cl6\mathrm{C_6H_6Cl_6}, whose γ-isomer is the insecticide gammaxane (lindane).
  6. (C) true: T (phthalazine ring, two N in the ring) is heterocyclic.
  7. (D) false: acid cyclisation of R gives anthraquinone; Clemmensen reduction (Zn-Hg/HCl) removes the C=O oxygens to give anthracene (via 9,10-dihydroanthracene), not 9,10-dihydroxyanthracene.

    Why: 9,10-Dihydroxyanthracene comes from mild reduction (e.g. Na2S2O4), not Clemmensen.

AnswerAnswer: (A), (B), (C)
Ask about this question

Chemistry, Section 3: 4 questions, numerical value (truncate/round off to two decimal places): +4 if correct, 0 in all other cases

Q9

Chemistry, Question 9 (4 marks)

Gaseous state (Dalton's law, ideal gas equation) · +4
Two cylinders, both fitted with frictionless pistons, are filled with mixtures of He and Ar gases. In the first cylinder, the masses of He and Ar are m1m_1 and m2m_2, respectively. In the second cylinder, the masses of He and Ar are m2m_2 and m1m_1, respectively. The molar mass of Ar is 10 times the molar mass of He. The external pressure applied by the piston on the first cylinder needs to be 5 times that on the second cylinder so that the volume of the gas mixtures in both the cylinders are equal at the same temperature. Assuming He and Ar behave like ideal gases, the value of (m1/m2)(m_1/m_2) is ____.

Tests: Relate pressure to total moles of a gas mixture at fixed volume and temperature.

Show solution
  1. Let the molar mass of He be MM, so Ar is 10M10M. Moles: cylinder 1, n1=m1M+m210Mn_1 = \dfrac{m_1}{M} + \dfrac{m_2}{10M}; cylinder 2, n2=m2M+m110Mn_2 = \dfrac{m_2}{M} + \dfrac{m_1}{10M}.
  2. Same V and T, ideal gases: p∝np \propto n, so p1p2=n1n2=5\dfrac{p_1}{p_2} = \dfrac{n_1}{n_2} = 5.

    Why: With frictionless pistons the gas pressure equals the external pressure.

  3. 10m1+m210m2+m1=5⇒10m1+m2=50m2+5m1⇒5m1=49m2\dfrac{10m_1 + m_2}{10m_2 + m_1} = 5 \Rightarrow 10m_1 + m_2 = 50m_2 + 5m_1 \Rightarrow 5m_1 = 49m_2.
  4. m1m2=495=9.80\dfrac{m_1}{m_2} = \dfrac{49}{5} = 9.80.
AnswerAnswer: 9.80
Ask about this question
Q10

Chemistry, Question 10 (4 marks)

Coordination compounds (isomerism) · +4
The total number of all possible isomers for the square planar complex with formula K[M(NCS)(NO2)(gly)]\mathrm{K[M(NCS)(NO_2)(gly)]} is ____. (M\mathrm{M} = metal ion and gly = NH2CH2COO−\mathrm{NH_2CH_2COO^-})

Tests: Count geometrical and linkage isomers of a square planar [M(AB)cd] complex.

Show solution
  1. The complex is [M(AB)cd]\mathrm{[M(AB)cd]}: glycinate is an unsymmetrical bidentate ligand (binds through N and O), and NCS and NO2\mathrm{NO_2} are two different monodentate ligands.
  2. Geometrical isomers: in a square plane the bidentate ligand spans two cis positions, so NCS is either trans to the glycinate N (and NO2\mathrm{NO_2} trans to O) or trans to O. That gives 2 geometrical isomers.
  3. Linkage isomers: thiocyanate binds through N (−NCS-\mathrm{NCS}) or S (−SCN-\mathrm{SCN}): 2 ways; nitrite binds through N (nitro) or O (nitrito): 2 ways.

    Why: Both are ambidentate ligands.

  4. Each of the 2×2=42 \times 2 = 4 linkage combinations has both geometrical forms: 2×4=82 \times 4 = 8. A square planar complex lies in its own mirror plane, so there are no optical isomers.
AnswerAnswer: 8
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Carboxylic acids (decarboxylation, anhydride formation) · +4
The sum of total number of carbonyl groups ( >C=O ) present in the major products X and Y in the following reactions is ____. (The figure shows two reactions. First: 2,4-dimethyl-3-oxopentanedioic acid, HO2C−CH(CH3)−CO−CH(CH3)−CO2H\mathrm{HO_2C{-}CH(CH_3){-}CO{-}CH(CH_3){-}CO_2H}, on heating gives X. Second: 4-oxocyclopentane-1,2-dicarboxylic acid (a cyclopentanone with CO2H groups on the two ring carbons farthest from the C=O, the two ring bonds leading to them drawn as matching bold wedges, so both CO2H are on the same face) on heating gives Y.)

Tests: Recognise β-keto acid decarboxylation and cyclic anhydride formation from cis-1,2-diacids, and count carbonyl groups.

Show solution
  1. X: each CO2H\mathrm{CO_2H} is β to the ketone C=O (β-keto acid). On heating both decarboxylate through a six-membered cyclic transition state: HO2CCH(CH3)COCH(CH3)CO2H→CH3CH2COCH2CH3+2CO2\mathrm{HO_2CCH(CH_3)COCH(CH_3)CO_2H \rightarrow CH_3CH_2COCH_2CH_3 + 2CO_2}. X = pentan-3-one: 1 carbonyl.
  2. Y: here the ring C=O is γ to each CO2H\mathrm{CO_2H} (two carbons away), so there is no easy decarboxylation.

    Why: Only a β-keto acid can form the cyclic six-membered transition state.

  3. The drawing is mirror-symmetric, so the two CO2H\mathrm{CO_2H} groups are cis (the meso diacid). A cis-1,2-diacid loses water on heating to a five-membered cyclic anhydride (like succinic anhydride): Y = the cis-fused bicyclic keto anhydride, with 2 anhydride C=O + 1 ketone C=O = 3 carbonyls.
  4. Sum = 1 + 3 = 4. (Even if Y were left as the diacid, it would still have 3 C=O: the ketone and the two COOH groups, so the sum is 4 either way.)
AnswerAnswer: 4
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Hydrocarbons (alkynes, hybridisation and geometry) · +4
Treatment of buta-1,3-diyne with NaNH2\mathrm{NaNH_2} (2 equivalents), followed by reaction with excess of trans-CH3−CH=CH−CH2−Br\mathrm{CH_3{-}CH{=}CH{-}CH_2{-}Br} gives X as the major product. The maximum number of carbon atoms that are collinear (in a straight line) in X is ____.

Tests: Alkylation of a terminal diyne via acetylide ions and counting collinear atoms around sp carbons.

Show solution
  1. NaNH2\mathrm{NaNH_2} (2 eq.) removes both terminal acidic H: HC≡C−C≡CH→NaC≡C−C≡CNa\mathrm{HC{\equiv}C{-}C{\equiv}CH \rightarrow NaC{\equiv}C{-}C{\equiv}CNa}.
  2. Each acetylide does SN2S_N2 on the allylic bromide (excess): X = CH3CH=CHCH2−C≡C−C≡C−CH2CH=CHCH3\mathrm{CH_3CH{=}CHCH_2{-}C{\equiv}C{-}C{\equiv}C{-}CH_2CH{=}CHCH_3}, (2E,10E)-dodeca-2,10-diene-5,7-diyne.
  3. The four sp carbons of the diyne are in a straight line (180° bond angles), and each sp carbon's other neighbour, the CH2\mathrm{CH_2}, lies on the same line.

    Why: An sp carbon's two bonds are collinear.

  4. The line stops at each CH2\mathrm{CH_2}: it is sp³, so the next carbon (the CH= carbon) is off the line at about 109.5°. Collinear carbons: CH2−C≡C−C≡C−CH2\mathrm{CH_2{-}C{\equiv}C{-}C{\equiv}C{-}CH_2} = 6.
AnswerAnswer: 6
Ask about this question

Chemistry, Section 4: 4 matching List-I / List-II sets, only one option correct: +4 if correct, 0 if unanswered, −1 in all other cases

Q13

Chemistry, Question 13 (4 marks)

Thermodynamics (signs of ΔH and ΔS) · +4 / −1
List-I contains various physical/chemical processes, and List-II contains combinations of changes in enthalpy (ΔH\Delta H) and entropy (ΔS\Delta S). Match each entry in List-I to the appropriate entry in List-II, and choose the correct option.
List-IList-II
(P) Physisorption(1) ΔH>0\Delta H > 0 and ΔS>0\Delta S > 0
(Q) Diamond →\rightarrow Graphite(2) ΔH<0\Delta H < 0 and ΔS<0\Delta S < 0
(R) Denaturation of protein(3) ΔH<0\Delta H < 0 and ΔS=0\Delta S = 0
(S) Propene →\rightarrow Cyclopropane(4) ΔH>0\Delta H > 0 and ΔS<0\Delta S < 0
(5) ΔH<0\Delta H < 0 and ΔS>0\Delta S > 0
  1. (A)P →\rightarrow 2; Q →\rightarrow 3; R →\rightarrow 5; S →\rightarrow 4
  2. (B)P →\rightarrow 4; Q →\rightarrow 3; R →\rightarrow 5; S →\rightarrow 1
  3. (C)P →\rightarrow 2; Q →\rightarrow 5; R →\rightarrow 1; S →\rightarrow 4
  4. (D)P →\rightarrow 2; Q →\rightarrow 5; R →\rightarrow 1; S →\rightarrow 3

Tests: Predict the signs of ΔH and ΔS for physical and chemical processes.

Show solution
  1. P, physisorption: van der Waals attraction releases heat (ΔH<0\Delta H < 0, about 20–40 kJ/mol), and gas molecules held on the surface lose freedom (ΔS<0\Delta S < 0). P →\rightarrow 2.
  2. Q, diamond → graphite: graphite is the standard state, so ΔH=−1.9\Delta H = -1.9 kJ/mol <0< 0; graphite's layered structure has more entropy (S∘S^\circ 5.7 vs 2.4 J/K/mol), so ΔS>0\Delta S > 0. Q →\rightarrow 5.

    Why: It is spontaneous but kinetically extremely slow.

  3. R, denaturation: breaking the H-bonds and other interactions that hold the folded protein absorbs heat (ΔH>0\Delta H > 0), and the unfolded chain is far more disordered (ΔS>0\Delta S > 0). R →\rightarrow 1.
  4. S, propene → cyclopropane: the strained ring is less stable (ΔfH∘\Delta_f H^\circ: about +20 vs +53 kJ/mol), so ΔH>0\Delta H > 0; closing the ring removes rotational freedom, so ΔS<0\Delta S < 0. S →\rightarrow 4.
  5. P →\rightarrow 2, Q →\rightarrow 5, R →\rightarrow 1, S →\rightarrow 4: option (C).
AnswerAnswer: (C) P →\rightarrow 2; Q →\rightarrow 5; R →\rightarrow 1; S →\rightarrow 4
Ask about this question
Q14

Chemistry, Question 14 (4 marks)

Chemical bonding (VSEPR shapes) · +4 / −1
Consider the following species: SOCl2\mathrm{SOCl_2}, XeOF4\mathrm{XeOF_4}, ClF3\mathrm{ClF_3}, ClF5\mathrm{ClF_5}, XeF5+\mathrm{XeF_5^+}, SO32−\mathrm{SO_3^{2-}}, XeF3+\mathrm{XeF_3^+}, SF4\mathrm{SF_4}. List-I contains different molecular shapes and List-II contains total number of species with the same molecular shapes from the given species. Match each entry in List-I with the appropriate entry in List-II and choose the correct option.
List-IList-II
(P) See-saw(1) one
(Q) T-Shaped(2) two
(R) Trigonal Planar(3) three
(S) Square Pyramidal(4) four
(5) zero
  1. (A)P →\rightarrow 1; Q →\rightarrow 2; R →\rightarrow 5; S →\rightarrow 3
  2. (B)P →\rightarrow 5; Q →\rightarrow 4; R →\rightarrow 2; S →\rightarrow 3
  3. (C)P →\rightarrow 3; Q →\rightarrow 2; R →\rightarrow 1; S →\rightarrow 4
  4. (D)P →\rightarrow 1; Q →\rightarrow 3; R →\rightarrow 5; S →\rightarrow 4

Tests: Predict molecular shapes with VSEPR, including cations of xenon and oxyanions.

Show solution
  1. Count bond pairs + lone pairs on the central atom (steric number). SOCl2\mathrm{SOCl_2}: 3 + 1 = 4, trigonal pyramidal. SO32−\mathrm{SO_3^{2-}}: 3 + 1 = 4, trigonal pyramidal.
  2. SF4\mathrm{SF_4}: 4 + 1 = 5, lone pair equatorial: see-saw. ClF3\mathrm{ClF_3}: 3 + 2 = 5, T-shaped. XeF3+\mathrm{XeF_3^+}: Xe has 8 − 1 = 7 electrons, 3 used in bonds, 2 lone pairs: 3 + 2 = 5, T-shaped.
  3. ClF5\mathrm{ClF_5}: 5 + 1 = 6, square pyramidal. XeF5+\mathrm{XeF_5^+}: 7 electrons, 5 bonds, 1 lone pair: 6, square pyramidal. XeOF4\mathrm{XeOF_4}: 5 σ-bonds + 1 lone pair = 6, square pyramidal.

    Why: The Xe=O π bond does not change the steric number.

  4. Tally: see-saw 1 (P →\rightarrow 1), T-shaped 2 (Q →\rightarrow 2), trigonal planar 0 (R →\rightarrow 5), square pyramidal 3 (S →\rightarrow 3): option (A).
AnswerAnswer: (A) P →\rightarrow 1; Q →\rightarrow 2; R →\rightarrow 5; S →\rightarrow 3
Ask about this question
Q15

Chemistry, Question 15 (4 marks)

Ozonolysis and intramolecular aldol condensation · +4 / −1
The List-II contains products obtained from the reaction of compounds in List-I with O3/Zn−H2O\mathrm{O_3/Zn{-}H_2O} followed by cyclization (via more stable enolate) in the presence of aqueous NaOH. Match each entry in List-I with appropriate entry in List-II and choose the correct option. (Every List-I compound is a fused bicyclic alkene with its C=C at the ring-fusion bond; every List-II product is a fused bicyclic aldol with OH on one ring-fusion carbon and CH3\mathrm{CH_3} on the other.)
List-IList-II
(P) Two fused six-membered rings, C=C at the fusion bond; one CH3\mathrm{CH_3} on the left-ring carbon next to the top fusion carbon and one CH3\mathrm{CH_3} on the right-ring carbon next to the bottom fusion carbon (1,5-dimethyl-Δ4a(8a)\Delta^{4a(8a)}-octalin)(1) Two fused six-membered rings: one fusion carbon has CH3\mathrm{CH_3}, the other OH; in the same ring, a C=O next to the CH3\mathrm{CH_3}-fusion carbon and a CH(CH3)\mathrm{CH(CH_3)} next to the OH-fusion carbon; the other ring is plain
(Q) A seven-membered ring fused to a five-membered ring, C=C at the fusion bond; one CH3\mathrm{CH_3} on the seven-ring carbon next to the top fusion carbon and one CH3\mathrm{CH_3} on the five-ring carbon next to the bottom fusion carbon(2) A five-membered ring fused to a seven-membered ring: one fusion carbon has CH3\mathrm{CH_3}, the other OH; in the seven-ring, a C=O next to the CH3\mathrm{CH_3}-fusion carbon and a CH(CH3)\mathrm{CH(CH_3)} next to the OH-fusion carbon; the five-ring is plain
(R) A seven-membered ring fused to a five-membered ring, C=C at the fusion bond; CH3\mathrm{CH_3} groups on both seven-ring carbons next to the fusion carbons; the five-ring is plain(3) A five-membered ring fused to a seven-membered ring: one fusion carbon has CH3\mathrm{CH_3}, the other OH; a C=O in the seven-ring next to the CH3\mathrm{CH_3}-fusion carbon, and a CH(CH3)\mathrm{CH(CH_3)} in the five-ring next to the OH-fusion carbon
(S) Two fused six-membered rings, C=C at the fusion bond; CH3\mathrm{CH_3} groups on both left-ring carbons next to the fusion carbons; the right ring is plain (1,4-dimethyl-Δ4a(8a)\Delta^{4a(8a)}-octalin)(4) Two fused six-membered rings: one fusion carbon has OH, the other CH3\mathrm{CH_3}; next to the OH-fusion carbon, a CH(CH3)\mathrm{CH(CH_3)} in one ring and a C=O in the other ring
(5) Two fused six-membered rings: one fusion carbon has OH, the other CH3\mathrm{CH_3}; a CH(CH3)\mathrm{CH(CH_3)} next to the OH-fusion carbon in one ring, and a C=O next to the CH3\mathrm{CH_3}-fusion carbon in the other ring
  1. (A)P →\rightarrow 2; Q →\rightarrow 4; R →\rightarrow 1; S →\rightarrow 3
  2. (B)P →\rightarrow 3; Q →\rightarrow 4; R →\rightarrow 5; S →\rightarrow 2
  3. (C)P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 5; S →\rightarrow 3
  4. (D)P →\rightarrow 3; Q →\rightarrow 5; R →\rightarrow 4; S →\rightarrow 2

Tests: Predict transannular aldol products after ozonolysis of a ring-fusion alkene, using ring size and enolate stability.

Show solution
  1. Ozonolysis of the fusion C=C (both carbons fully substituted) gives two ketones in one big ring: a 6-6 alkene gives a cyclodecane-1,6-dione; a 7-5 alkene gives a cyclononane-1,5-dione. Call the two new C=O carbons A (top) and B (bottom).
  2. Ring sizes of the transannular aldol: in the 10-ring dione, an α-carbon of A is 4 bonds from B on either side, so the new bond makes a 5-ring and a 7-ring (P, S → products 2 or 3). In the 9-ring dione, an α-carbon on the long (old 7-ring) side gives a 6-ring and a 6-ring (Q, R → products 1, 4 or 5); the short side would need a 4-ring.

    Why: The enolate carbon bonds to the other carbonyl carbon, which becomes the C–OH fusion carbon.

  3. "More stable enolate" = the more substituted one, at the CH(CH3)\mathrm{CH(CH_3)} α-carbon. That carbon becomes the fusion carbon carrying CH3\mathrm{CH_3}, and its own C=O stays next to it as the ketone.
  4. P: enolate at the CH(CH3)\mathrm{CH(CH_3)} next to A attacks B. The 7-ring holds the ketone (next to the CH3\mathrm{CH_3}-fusion carbon) and the other CH(CH3)\mathrm{CH(CH_3)}, which was next to B (next to the OH-fusion carbon); the 5-ring is plain. P →\rightarrow 2.
  5. S: enolate at the CH(CH3)\mathrm{CH(CH_3)} next to A attacks B. The 5-ring now holds the old left ring's carbons including the second CH(CH3)\mathrm{CH(CH_3)}, next to the OH-fusion carbon; the ketone is in the 7-ring next to the CH3\mathrm{CH_3}-fusion carbon. S →\rightarrow 3.
  6. Q: enolate at the seven-ring CH(CH3)\mathrm{CH(CH_3)} next to A attacks B. One new 6-ring is the plain chain of the old 7-ring; the other contains A (ketone, next to the CH3\mathrm{CH_3}-fusion carbon) and the old five-ring CH(CH3)\mathrm{CH(CH_3)} (next to the OH-fusion carbon). C=O and CH(CH3)\mathrm{CH(CH_3)} in the same ring: Q →\rightarrow 1.
  7. R: enolate at the CH(CH3)\mathrm{CH(CH_3)} next to A attacks B. The ring made from the old 7-ring keeps the other CH(CH3)\mathrm{CH(CH_3)}, next to the OH-fusion carbon; the ring made from the old 5-ring holds the ketone A next to the CH3\mathrm{CH_3}-fusion carbon. Different rings: R →\rightarrow 5. So P →\rightarrow 2, Q →\rightarrow 1, R →\rightarrow 5, S →\rightarrow 3: option (C).
AnswerAnswer: (C) P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 5; S →\rightarrow 3
Ask about this question
Q16

Chemistry, Question 16 (4 marks)

Oximes (SNAr, Kemp elimination, dehydration) · +4 / −1
Match the major products obtained in the reactions given in List-I with the corresponding structures in List-II and choose the correct option. (All List-I starting materials carry a 2-bromo-5-nitrophenyl ring: the Br is ortho and the NO2\mathrm{NO_2} is para to the Br. In P, Q and R the oxime OH is drawn on the same side as the aryl ring, towards the Br; in S the O-acetyl group is drawn on the CH3\mathrm{CH_3} side, away from the ring.)
List-IList-II
(P) 2-Bromo-5-nitrobenzaldehyde oxime, ArCH=N−OH\mathrm{ArCH{=}N{-}OH}, with aqueous NaOH(1) 2-Hydroxy-5-nitrobenzonitrile (CN and OH ortho; NO2 para to OH)
(Q) The same aldoxime with 1. (CH3CO)2O\mathrm{(CH_3CO)_2O}, 2. Na2CO3\mathrm{Na_2CO_3}(2) 2-Bromo-5-nitrobenzonitrile
(R) 1-(2-Bromo-5-nitrophenyl)ethanone oxime, Ar(CH3)C=N−OH\mathrm{Ar(CH_3)C{=}N{-}OH}, with aqueous NaOH(3) N-(2-Bromo-5-nitrophenyl)acetamide, ArNHCOCH3
(S) The O-acetyl oxime Ar(CH3)C=N−OCOCH3\mathrm{Ar(CH_3)C{=}N{-}OCOCH_3}, with aqueous Na2CO3\mathrm{Na_2CO_3}(4) 3-Methyl-5-nitro-1,2-benzisoxazole
(5) 1-(2-Bromo-5-nitrophenyl)ethanone oxime with its OH on the CH3 side (anti to the ring)
  1. (A)P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 5; S →\rightarrow 4
  2. (B)P →\rightarrow 1; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 5
  3. (C)P →\rightarrow 1; Q →\rightarrow 2; R →\rightarrow 3; S →\rightarrow 4
  4. (D)P →\rightarrow 2; Q →\rightarrow 1; R →\rightarrow 3; S →\rightarrow 5

Tests: Predict what base does to oximes and oxime acetates of an activated o-bromoarene: SNAr cyclisation, Kemp elimination, nitrile formation or simple hydrolysis.

Show solution
  1. The C–Br is activated for nucleophilic aromatic substitution by the NO2\mathrm{NO_2} para to it. An oxime O on the ring side can reach that carbon and close a five-membered ring: a 1,2-benzisoxazole.
  2. R: NaOH deprotonates the oxime; O−\mathrm{O^-} displaces Br−\mathrm{Br^-} intramolecularly (SNArS_NAr) to give 3-methyl-5-nitro-1,2-benzisoxazole. With CH3\mathrm{CH_3} at C3 the ring is stable. R →\rightarrow 4.
  3. P: the same cyclisation gives 5-nitro-1,2-benzisoxazole with H at C3. Base removes that C3–H and the weak N–O bond breaks (Kemp elimination), giving the phenoxide of 2-hydroxy-5-nitrobenzonitrile. P →\rightarrow 1.

    Why: The OH ends up where the Br was; the CN comes from the CH=N.

  4. Q: Ac2O\mathrm{Ac_2O} acetylates the oxime O, so it can no longer attack the ring. Na2CO3\mathrm{Na_2CO_3} then removes the aldehyde C–H and acetate leaves (elimination), giving the nitrile with Br intact: 2-bromo-5-nitrobenzonitrile. Q →\rightarrow 2.
  5. S: a ketoxime acetate has no C–H on the C=N carbon, so no nitrile forms, and mild aqueous Na2CO3\mathrm{Na_2CO_3} does not cause a Beckmann rearrangement (that needs acid), so (3) is ruled out. It only hydrolyses the acetate to the oxime; its O is on the CH3\mathrm{CH_3} side, away from the C–Br, so it cannot cyclise. S →\rightarrow 5.
  6. P →\rightarrow 1, Q →\rightarrow 2, R →\rightarrow 4, S →\rightarrow 5: option (B).
AnswerAnswer: (B) P →\rightarrow 1; Q →\rightarrow 2; R →\rightarrow 4; S →\rightarrow 5
Ask about this question

Questions are quoted from JEE (Advanced) 2026 Paper 1 (English); figures are described in words. Every final answer is checked against the official provisional answer key; the final key may still change an answer. Where the key accepts more than one answer, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.