AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

JEE Advanced 2026 Paper 2: Question Paper with Solutions and Answer Key

All 54 questions of JEE Advanced 2026 Paper 2 solved step by step: Mathematics, Physics and Chemistry, with the official provisional answer key and the marking of each section. Every final answer is checked against the official provisional answer key.

JEE (Advanced) 2026 Paper 2: 54 questions, 180 marks, 3 hours. Open any question to see the steps one at a time or ask a doubt about a step. The other paper of 2026: Paper 1.

Mathematics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Mathematics, Question 1 (3 marks)

Vector algebra · +3 / −1
Let a⃗,b⃗\vec{a}, \vec{b} be two vectors, and let P,QP, Q and RR be the points with position vectors a⃗\vec{a}, b⃗\vec{b} and a⃗+b⃗\vec{a} + \vec{b}, respectively, with respect to the origin OO. If ∣a⃗+b⃗∣=21|\vec{a} + \vec{b}| = \sqrt{21}, ∣a⃗−b⃗∣=3|\vec{a} - \vec{b}| = 3, and a⃗\vec{a} and (a⃗−b⃗)(\vec{a} - \vec{b}) are perpendicular to each other, then the area of the triangle OPROPR is
  1. (A)3\sqrt{3}
  2. (B)32\dfrac{\sqrt{3}}{2}
  3. (C)332\dfrac{3\sqrt{3}}{2}
  4. (D)32\dfrac{3}{2}

Tests: Use dot products to find lengths and then the cross product for a triangle's area.

Show solution
  1. Square the two lengths: ∣a⃗∣2+∣b⃗∣2+2a⃗⋅b⃗=21|\vec{a}|^2 + |\vec{b}|^2 + 2\vec{a}\cdot\vec{b} = 21 and ∣a⃗∣2+∣b⃗∣2−2a⃗⋅b⃗=9|\vec{a}|^2 + |\vec{b}|^2 - 2\vec{a}\cdot\vec{b} = 9.
  2. Adding and subtracting: ∣a⃗∣2+∣b⃗∣2=15|\vec{a}|^2 + |\vec{b}|^2 = 15 and a⃗⋅b⃗=3\vec{a}\cdot\vec{b} = 3.
  3. Perpendicularity: a⃗⋅(a⃗−b⃗)=0\vec{a}\cdot(\vec{a} - \vec{b}) = 0, so ∣a⃗∣2=a⃗⋅b⃗=3|\vec{a}|^2 = \vec{a}\cdot\vec{b} = 3 and then ∣b⃗∣2=12|\vec{b}|^2 = 12.
  4. Area of OPR=12∣a⃗×(a⃗+b⃗)∣=12∣a⃗×b⃗∣OPR = \dfrac{1}{2}|\vec{a} \times (\vec{a} + \vec{b})| = \dfrac{1}{2}|\vec{a} \times \vec{b}|.

    Why: a⃗×a⃗=0⃗\vec{a} \times \vec{a} = \vec{0}.

  5. ∣a⃗×b⃗∣2=∣a⃗∣2∣b⃗∣2−(a⃗⋅b⃗)2=36−9=27|\vec{a} \times \vec{b}|^2 = |\vec{a}|^2|\vec{b}|^2 - (\vec{a}\cdot\vec{b})^2 = 36 - 9 = 27, so ∣a⃗×b⃗∣=33|\vec{a} \times \vec{b}| = 3\sqrt{3} and the area is 332\dfrac{3\sqrt{3}}{2}.

    Why: Lagrange's identity avoids finding the angle.

AnswerAnswer: (C) 332\dfrac{3\sqrt{3}}{2}
Ask about this question
Q2

Mathematics, Question 2 (3 marks)

Parabola · +3 / −1
Let TT be the tangent to the parabola y2=16xy^2 = 16x at the point (64,32)(64, 32). Let LL be the tangent to the same parabola at another point (x1,y1)(x_1, y_1) on the parabola. If LL and TT are perpendicular to each other, then the distance between the point (x1,y1)(x_1, y_1) and the focus of the parabola, is
  1. (A)154\dfrac{15}{4}
  2. (B)44
  3. (C)174\dfrac{17}{4}
  4. (D)55

Tests: Use the parametric form and the perpendicular-tangent condition for a parabola.

Show solution
  1. y2=16xy^2 = 16x has a=4a = 4; parametric point (4t2,8t)(4t^2, 8t), focus (4,0)(4, 0). The point (64,32)(64, 32) has t1=4t_1 = 4.
  2. The tangent at tt has slope 1t\dfrac{1}{t}, so perpendicular tangents need t1t2=−1t_1 t_2 = -1, giving t2=−14t_2 = -\dfrac{1}{4}.
  3. (x1,y1)=(4⋅116,8⋅(−14))=(14,−2)(x_1, y_1) = \left(4 \cdot \dfrac{1}{16}, 8 \cdot \left(-\dfrac{1}{4}\right)\right) = \left(\dfrac{1}{4}, -2\right).
  4. Focal distance =x1+a=14+4=174= x_1 + a = \dfrac{1}{4} + 4 = \dfrac{17}{4}.

    Why: Distance to the focus equals distance to the directrix x=−4x = -4.

AnswerAnswer: (C) 174\dfrac{17}{4}
Ask about this question
Q3

Mathematics, Question 3 (3 marks)

Differential equations · +3 / −1
Let y:(−∞,∞)→(0,∞)y : (-\infty, \infty) \to (0, \infty) be the solution of the differential equation dydx=e5xy3+y3ex+exy4\dfrac{dy}{dx} = \dfrac{e^{5x}y^3 + y^3}{e^x + e^x y^4}, satisfying y(0)=12y(0) = \dfrac{1}{\sqrt{2}}. Then the value of y(log⁡e2)y(\log_e 2) is
  1. (A)5+352\sqrt{\dfrac{5 + \sqrt{35}}{2}}
  2. (B)7+532\sqrt{\dfrac{7 + \sqrt{53}}{2}}
  3. (C)7+532\dfrac{7 + \sqrt{53}}{2}
  4. (D)5+352\dfrac{5 + \sqrt{35}}{2}

Tests: Separate variables after factoring and apply the initial condition.

Show solution
  1. Factor: dydx=y3(e5x+1)ex(1+y4)\dfrac{dy}{dx} = \dfrac{y^3(e^{5x} + 1)}{e^x(1 + y^4)}, which separates.
  2. 1+y4y3 dy=(e4x+e−x) dx\dfrac{1 + y^4}{y^3}\,dy = (e^{4x} + e^{-x})\,dx, i.e. (y−3+y) dy=(e4x+e−x) dx(y^{-3} + y)\,dy = (e^{4x} + e^{-x})\,dx.
  3. Integrate: −12y2+y22=e4x4−e−x+C-\dfrac{1}{2y^2} + \dfrac{y^2}{2} = \dfrac{e^{4x}}{4} - e^{-x} + C.
  4. At x=0x = 0, y2=12y^2 = \dfrac{1}{2}: −1+14=14−1+C-1 + \dfrac{1}{4} = \dfrac{1}{4} - 1 + C, so C=0C = 0.
  5. At x=log⁡e2x = \log_e 2: right side =164−12=72= \dfrac{16}{4} - \dfrac{1}{2} = \dfrac{7}{2}. With u=y2u = y^2: u2−12u=72\dfrac{u}{2} - \dfrac{1}{2u} = \dfrac{7}{2}, so u2−7u−1=0u^2 - 7u - 1 = 0.
  6. u=7+532u = \dfrac{7 + \sqrt{53}}{2} (positive root), and since y>0y > 0, y=7+532y = \sqrt{\dfrac{7 + \sqrt{53}}{2}}.

    Why: Option (C) is y2y^2, not yy.

AnswerAnswer: (B) 7+532\sqrt{\dfrac{7 + \sqrt{53}}{2}}
Ask about this question
Q4

Mathematics, Question 4 (3 marks)

Definite integration · +3 / −1
The value of the definite integral ∫0213x+3 dx\displaystyle\int_0^2 \dfrac{1}{3^x + 3}\,dx is
  1. (A)12\dfrac{1}{2}
  2. (B)13\dfrac{1}{3}
  3. (C)log⁡e33\dfrac{\log_e 3}{3}
  4. (D)log⁡e32\dfrac{\log_e 3}{2}

Tests: Evaluate an exponential integral by splitting it or by the King property.

Show solution
  1. Write 13x+3=13(1−3x3x+3)\dfrac{1}{3^x + 3} = \dfrac{1}{3}\left(1 - \dfrac{3^x}{3^x + 3}\right).
  2. ∫3x3x+3 dx=log⁡e(3x+3)log⁡e3\displaystyle\int \dfrac{3^x}{3^x + 3}\,dx = \dfrac{\log_e(3^x + 3)}{\log_e 3}.

    Why: The numerator is 1log⁡e3\dfrac{1}{\log_e 3} times the derivative of the denominator.

  3. So I=13[2−log⁡e12−log⁡e4log⁡e3]=13[2−log⁡e3log⁡e3]=13I = \dfrac{1}{3}\left[2 - \dfrac{\log_e 12 - \log_e 4}{\log_e 3}\right] = \dfrac{1}{3}\left[2 - \dfrac{\log_e 3}{\log_e 3}\right] = \dfrac{1}{3}.
  4. Check by symmetry: with x→2−xx \to 2 - x, 132−x+3=3x3(3+3x)\dfrac{1}{3^{2-x} + 3} = \dfrac{3^x}{3(3 + 3^x)}, and adding to the original gives 13\dfrac{1}{3}; so 2I=232I = \dfrac{2}{3}.
AnswerAnswer: (B) 13\dfrac{1}{3}
Ask about this question

Mathematics, Section 2: 5 questions, one or more options correct: +4 if all correct options and nothing else are chosen; +3 if all four are correct and three are chosen; +2 if three or more are correct and two correct ones are chosen; +1 if two or more are correct and one correct one is chosen; 0 if unanswered; −1 in all other cases

Q5

Mathematics, Question 5 (4 marks)

Polynomials and higher derivatives · +4 / −1
Let R\mathbb{R} denote the set of all real numbers. Consider the polynomial function f:R→Rf : \mathbb{R} \to \mathbb{R} defined by f(x)=d10dx10((x2−1)10)f(x) = \dfrac{d^{10}}{dx^{10}}\left((x^2 - 1)^{10}\right), for all x∈Rx \in \mathbb{R}. Here d10dx10((x2−1)10)\dfrac{d^{10}}{dx^{10}}\left((x^2 - 1)^{10}\right) is the 10th10^{\text{th}} order derivative of the function (x2−1)10(x^2 - 1)^{10}. Then which of the following statements is (are) TRUE?
  1. (A)The coefficient of x8x^8 in the polynomial f(x)f(x) is (−10)(18!8!)(-10)\left(\dfrac{18!}{8!}\right)
  2. (B)The value of f(1)+f(−1)f(1) + f(-1) is equal to 10! 21110!\,2^{11}
  3. (C)The degree of the polynomial f(x)f(x) is 10
  4. (D)The constant term of the polynomial f(x)f(x) is −(10!5!)-\left(\dfrac{10!}{5!}\right)

Tests: Find coefficients of a high-order derivative of a binomial expansion and evaluate it with Leibniz's rule.

Show solution
  1. Expand: (x2−1)10=∑j=010(10j)(−1)10−jx2j(x^2 - 1)^{10} = \displaystyle\sum_{j=0}^{10} \binom{10}{j}(-1)^{10-j}x^{2j}. The 10th derivative of x2jx^{2j} is (2j)!(2j−10)!x2j−10\dfrac{(2j)!}{(2j-10)!}x^{2j-10} for j≥5j \ge 5 and 0 for j<5j < 5.
  2. (C): the top term j=10j = 10 gives 20!10!x10\dfrac{20!}{10!}x^{10}, so the degree is 10. True.
  3. (A): x8x^8 comes from j=9j = 9: (109)(−1)118!8!=(−10)18!8!\binom{10}{9}(-1)^1\dfrac{18!}{8!} = (-10)\dfrac{18!}{8!}. True.
  4. (D): the constant comes from j=5j = 5: (105)(−1)510!0!=−252⋅10!\binom{10}{5}(-1)^5\dfrac{10!}{0!} = -252 \cdot 10!, not −10!5!-\dfrac{10!}{5!}. False.
  5. (B): write (x2−1)10=(x−1)10(x+1)10(x^2 - 1)^{10} = (x - 1)^{10}(x + 1)^{10}. By Leibniz's rule, at x=1x = 1 every term vanishes except the one with all 10 derivatives on (x−1)10(x - 1)^{10}: f(1)=10!⋅210f(1) = 10! \cdot 2^{10}.

    Why: Any fewer derivatives on (x−1)10(x - 1)^{10} leave a factor (x−1)(x - 1) that is 0 at x=1x = 1.

  6. ff is even (only even powers survive), so f(−1)=f(1)f(-1) = f(1) and f(1)+f(−1)=10! 211f(1) + f(-1) = 10!\,2^{11}. True.

    Why: Equivalently f=210 10! P10(x)f = 2^{10}\,10!\,P_{10}(x) (Rodrigues' formula) with P10(±1)=1P_{10}(\pm 1) = 1.

AnswerAnswer: (A), (B), (C)
Ask about this question
Q6

Mathematics, Question 6 (4 marks)

Quadratic equations · +4 / −1
Let a,b,ca, b, c be positive integers in arithmetic progression such that the equation ax2+bx+c=0ax^2 + bx + c = 0 has only integer solutions. Then which of the following statements is (are) TRUE?
  1. (A)c−bc - b is an integer multiple of aa
  2. (B)Both the roots of the equation ax2+bx+c=0ax^2 + bx + c = 0 are odd integers
  3. (C)If c=15c = 15, then ab=8ab = 8
  4. (D)If b=8b = 8, then x=3x = 3 is a root of the equation ax2+bx+c=0ax^2 + bx + c = 0

Tests: Turn an AP condition on coefficients into a factorable condition on integer roots.

Show solution
  1. Let the integer roots be r,sr, s: r+s=−bar + s = -\dfrac{b}{a}, rs=cars = \dfrac{c}{a}. AP: 2b=a+c2b = a + c, so −2(r+s)=1+rs-2(r + s) = 1 + rs.
  2. Rearrange: rs+2r+2s+4=3rs + 2r + 2s + 4 = 3, i.e. (r+2)(s+2)=3(r + 2)(s + 2) = 3.

    Why: Completing the product turns the condition into a factor pair of 3.

  3. Integer pairs: (1,3)(1, 3) gives r,s=−1,1r, s = -1, 1 with rs=−1<0rs = -1 < 0, impossible since ca>0\dfrac{c}{a} > 0. (−1,−3)(-1, -3) gives r,s=−3,−5r, s = -3, -5.
  4. So the roots are −3-3 and −5-5: b=8ab = 8a, c=15ac = 15a, and the equation is a(x2+8x+15)=0a(x^2 + 8x + 15) = 0.
  5. (A) c−b=7ac - b = 7a. True. (B) −3-3 and −5-5 are odd. True. (C) c=15c = 15 gives a=1a = 1, b=8b = 8, ab=8ab = 8. True. (D) b=8b = 8 gives a=1a = 1, roots −3,−5-3, -5; x=3x = 3 is not a root. False.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q7

Mathematics, Question 7 (4 marks)

Three-dimensional geometry · +4 / −1
Let LL be the straight line joining the points P(1,2,−1)P(1, 2, -1) and Q(2,3,1)Q(2, 3, 1). Let SS be the foot of the perpendicular drawn from the point R(4,−1,5)R(4, -1, 5) to the line LL. Another line passing through RR intersects LL at a point TT such that the point SS divides the line segment PTPT internally in the ratio ∣PS∣:∣ST∣=1:2|PS| : |ST| = 1 : 2, where ∣PS∣|PS| and ∣ST∣|ST| are the lengths of the line segments PSPS and STST, respectively. Then which of the following statements is (are) TRUE?
  1. (A)The orthocentre of the triangle PRTPRT is (235,−4,315)\left(\dfrac{23}{5}, -4, \dfrac{31}{5}\right)
  2. (B)The orthocentre of the triangle PRTPRT is (4,3,5)(4, 3, 5)
  3. (C)The area of the triangle PRTPRT is 656\sqrt{5}
  4. (D)The area of the triangle PRTPRT is 18518\sqrt{5}

Tests: Find a foot of perpendicular, then use two altitudes to locate the orthocentre in 3D.

Show solution
  1. LL: (1+λ,2+λ,−1+2λ)(1 + \lambda, 2 + \lambda, -1 + 2\lambda), direction (1,1,2)(1, 1, 2) (λ=0\lambda = 0 at PP).
  2. Foot SS: (3−λ,−3−λ,6−2λ)⋅(1,1,2)=12−6λ=0(3 - \lambda, -3 - \lambda, 6 - 2\lambda)\cdot(1, 1, 2) = 12 - 6\lambda = 0, so λ=2\lambda = 2 and S=(3,4,3)S = (3, 4, 3).
  3. PS:ST=1:2PS : ST = 1 : 2 with SS between PP and TT puts TT at λ=6\lambda = 6: T=(7,8,11)T = (7, 8, 11).
  4. Area: base PT=66PT = 6\sqrt{6}, height RS=∣(1,−5,2)∣=30RS = |(1, -5, 2)| = \sqrt{30}, so area =12⋅66⋅30=3180=185= \dfrac{1}{2} \cdot 6\sqrt{6} \cdot \sqrt{30} = 3\sqrt{180} = 18\sqrt{5}. (D) true, (C) false.
  5. The altitude from RR is the line RSRS, so the orthocentre is H=S+μ(R−S)=(3+μ,4−5μ,3+2μ)H = S + \mu(R - S) = (3 + \mu, 4 - 5\mu, 3 + 2\mu).
  6. HH also lies on the altitude from PP: (H−P)⋅(T−R)=0(H - P)\cdot(T - R) = 0 with T−R=(3,9,6)∥(1,3,2)T - R = (3, 9, 6) \parallel (1, 3, 2): (2+μ)+3(2−5μ)+2(4+2μ)=16−10μ=0(2 + \mu) + 3(2 - 5\mu) + 2(4 + 2\mu) = 16 - 10\mu = 0, so μ=85\mu = \dfrac{8}{5}.
  7. H=(235,−4,315)H = \left(\dfrac{23}{5}, -4, \dfrac{31}{5}\right). (A) true. (4,3,5)(4, 3, 5) is not on line RSRS (where x=4x = 4 forces μ=1\mu = 1, the point RR itself), so (B) false.
AnswerAnswer: (A), (D)
Ask about this question
Q8

Mathematics, Question 8 (4 marks)

Differential equations and monotonicity · +4 / −1
Let y=f(x)y = f(x) be the real valued function defined on the interval (0,∞)(0, \infty), satisfying y(1)=0y(1) = 0 and the differential equation xdydx=y−x3x\dfrac{dy}{dx} = y - x^3. Then which of the following statements is (are) TRUE?
  1. (A)The function ff has a local minimum at x=13x = \dfrac{1}{\sqrt{3}}
  2. (B)The function ff has a local maximum at x=13x = \dfrac{1}{\sqrt{3}}
  3. (C)The function ff is increasing in the interval (1,2)(1, 2)
  4. (D)If g(x)=4x3−5x2+32xg(x) = 4x^3 - 5x^2 + \dfrac{3}{2}x for x>0x > 0, then the number of elements in the set {x∈(0,∞):f(x)=g(x)}\{x \in (0, \infty) : f(x) = g(x)\} is 2

Tests: Solve a linear first-order equation and study the solution's extrema and intersections.

Show solution
  1. Rewrite: dydx−yx=−x2\dfrac{dy}{dx} - \dfrac{y}{x} = -x^2, i.e. ddx(yx)=−x\dfrac{d}{dx}\left(\dfrac{y}{x}\right) = -x.

    Why: Integrating factor 1x\dfrac{1}{x}.

  2. yx=−x22+C\dfrac{y}{x} = -\dfrac{x^2}{2} + C; y(1)=0y(1) = 0 gives C=12C = \dfrac{1}{2}, so f(x)=x−x32f(x) = \dfrac{x - x^3}{2}.
  3. f′(x)=1−3x22=0f'(x) = \dfrac{1 - 3x^2}{2} = 0 at x=13x = \dfrac{1}{\sqrt{3}}, and f′′(x)=−3x<0f''(x) = -3x < 0 there: local maximum. (A) false, (B) true.
  4. (C): for x>13x > \dfrac{1}{\sqrt{3}}, f′(x)<0f'(x) < 0, so ff decreases on (1,2)(1, 2). False.
  5. (D): x−x32=4x3−5x2+32x\dfrac{x - x^3}{2} = 4x^3 - 5x^2 + \dfrac{3}{2}x gives 9x3−10x2+2x=09x^3 - 10x^2 + 2x = 0, i.e. x(9x2−10x+2)=0x(9x^2 - 10x + 2) = 0.
  6. For x>0x > 0: 9x2−10x+2=09x^2 - 10x + 2 = 0 has discriminant 28>028 > 0 and roots 5±79\dfrac{5 \pm \sqrt{7}}{9}, both positive. Two elements. True.
AnswerAnswer: (B), (D)
Ask about this question
Q9

Mathematics, Question 9 (4 marks)

Matrices and complex numbers · +4 / −1
Let R\mathbb{R} denote the set of all real numbers and let i=−1i = \sqrt{-1}. Consider the matrices S=[0−110]S = \begin{bmatrix} 0 & -1 \\ 1 & 0 \end{bmatrix} and T=[1101]T = \begin{bmatrix} 1 & 1 \\ 0 & 1 \end{bmatrix}. Let a,b,c,da, b, c, d be real numbers such that ST=[abcd]ST = \begin{bmatrix} a & b \\ c & d \end{bmatrix}. Let H={x+iy:x,y∈R and y>0}H = \{x + iy : x, y \in \mathbb{R} \text{ and } y > 0\}. Then which of the following statements is (are) TRUE?
  1. (A)b+iad+ic=i\dfrac{b + ia}{d + ic} = i
  2. (B)If ω=−1+i32\omega = \dfrac{-1 + i\sqrt{3}}{2}, then aω+bcω+d=ω\dfrac{a\omega + b}{c\omega + d} = \omega
  3. (C)If mm is an integer greater than 2 such that (ST)2=(ST)m(ST)^2 = (ST)^m, then mm is an integer multiple of 8
  4. (D)If z∈Hz \in H, then az+bcz+d∈H\dfrac{az + b}{cz + d} \in H

Tests: Compute a matrix product, its powers via Cayley–Hamilton, and the Möbius map it defines.

Show solution
  1. ST=[0−111]ST = \begin{bmatrix} 0 & -1 \\ 1 & 1 \end{bmatrix}, so a=0a = 0, b=−1b = -1, c=1c = 1, d=1d = 1, and ad−bc=1ad - bc = 1.
  2. (A): −11+i=−1+i2≠i\dfrac{-1}{1 + i} = \dfrac{-1 + i}{2} \ne i. False.
  3. (B): −1ω+1=−1−ω2=1ω2=ω\dfrac{-1}{\omega + 1} = \dfrac{-1}{-\omega^2} = \dfrac{1}{\omega^2} = \omega. True.

    Why: 1+ω+ω2=01 + \omega + \omega^2 = 0 and ω3=1\omega^3 = 1.

  4. (C): STST has trace 1 and determinant 1, so (ST)2−ST+I=0(ST)^2 - ST + I = 0; then (ST)3=−I(ST)^3 = -I and (ST)6=I(ST)^6 = I.

    Why: Multiply (ST)2=ST−I(ST)^2 = ST - I by STST: (ST)3=(ST)2−ST=−I(ST)^3 = (ST)^2 - ST = -I.

  5. STST is invertible, so (ST)m=(ST)2(ST)^m = (ST)^2 exactly when (ST)m−2=I(ST)^{m-2} = I, i.e. m≡2(mod6)m \equiv 2 \pmod 6: m=8,14,20,…m = 8, 14, 20, \ldots Since 1414 is not a multiple of 8, (C) is false.
  6. (D): for w=az+bcz+dw = \dfrac{az + b}{cz + d} with real entries, Im⁡w=(ad−bc)Im⁡z∣cz+d∣2\operatorname{Im} w = \dfrac{(ad - bc)\operatorname{Im} z}{|cz + d|^2}. Here w=−1z+1w = \dfrac{-1}{z + 1} and Im⁡w=Im⁡z∣z+1∣2>0\operatorname{Im} w = \dfrac{\operatorname{Im} z}{|z + 1|^2} > 0. True.
AnswerAnswer: (B), (D)
Ask about this question

Mathematics, Section 3: 5 questions, numerical value answer (truncate or round off to two decimal places): +4 if correct, 0 in all other cases

Q10

Mathematics, Question 10 (4 marks)

Functions and counting · +4
Let N\mathbb{N} denote the set of all positive integers. Consider the sets A={1,2,3,4,5}A = \{1, 2, 3, 4, 5\} and B={1,2,3,4,5,6,7}B = \{1, 2, 3, 4, 5, 6, 7\}. Let SS be the set of all functions f:A→Bf : A \to B such that f(2)≠2f(2) \ne 2 and f(4)≠4f(4) \ne 4. Consider the set T={f∈S:there exists a function g:B→N such that g(f(x))=2x for all x∈A}T = \{f \in S : \text{there exists a function } g : B \to \mathbb{N} \text{ such that } g(f(x)) = 2^x \text{ for all } x \in A\}. Then the number of elements in the set TT is ____.

Tests: Recognise that a left-inverse-type condition forces injectivity, then count with inclusion–exclusion.

Show solution
  1. If f(x)=f(y)f(x) = f(y) then 2x=g(f(x))=g(f(y))=2y2^x = g(f(x)) = g(f(y)) = 2^y, so x=yx = y: every f∈Tf \in T is one-one.
  2. Conversely, if ff is one-one, set g(f(x))=2xg(f(x)) = 2^x on the range of ff and g=1g = 1 elsewhere on BB. So TT = one-one f∈Sf \in S.
  3. All one-one f:A→Bf : A \to B: 7⋅6⋅5⋅4⋅3=25207 \cdot 6 \cdot 5 \cdot 4 \cdot 3 = 2520.
  4. With f(2)=2f(2) = 2: 6⋅5⋅4⋅3=3606 \cdot 5 \cdot 4 \cdot 3 = 360; same for f(4)=4f(4) = 4; with both: 5⋅4⋅3=605 \cdot 4 \cdot 3 = 60.
  5. Inclusion–exclusion: 2520−360−360+60=18602520 - 360 - 360 + 60 = 1860.
AnswerAnswer: 1860
Ask about this question
Q11

Mathematics, Question 11 (4 marks)

Probability distributions · +4
A bookshelf contains 6 distinct books of Mathematics and 5 distinct books of Physics. From these 11 books, 6 books are chosen at random. Let XX be the absolute value of the difference between the number of Mathematics books chosen and the number of Physics books chosen. If α\alpha is the mean of the random variable XX, then the value of 77α77\alpha is ____.

Tests: Build a probability distribution from hypergeometric counts and find its mean.

Show solution
  1. If mm Mathematics books are chosen, 6−m6 - m are Physics, so X=∣2m−6∣X = |2m - 6| with 1≤m≤61 \le m \le 6. Total selections (116)=462\binom{11}{6} = 462.
  2. Counts (6m)(56−m)\binom{6}{m}\binom{5}{6-m}: m=1m = 1: 6 (X=4X = 4); m=2m = 2: 75 (X=2X = 2); m=3m = 3: 200 (X=0X = 0); m=4m = 4: 150 (X=2X = 2); m=5m = 5: 30 (X=4X = 4); m=6m = 6: 1 (X=6X = 6). They add to 462.
  3. α=4(6+30)+2(75+150)+6(1)462=144+450+6462=600462=10077\alpha = \dfrac{4(6 + 30) + 2(75 + 150) + 6(1)}{462} = \dfrac{144 + 450 + 6}{462} = \dfrac{600}{462} = \dfrac{100}{77}.
  4. 77α=10077\alpha = 100.
AnswerAnswer: 100
Ask about this question
Q12

Mathematics, Question 12 (4 marks)

Statistics (mean and variance) · +4
Consider a data consisting of 10 observations x1,x2,…,x10x_1, x_2, \ldots, x_{10}, whose mean is 5 and variance is 7. If the mean and the variance of the first 8 observations x1,x2,…,x8x_1, x_2, \ldots, x_8 are 4 and 3.5, respectively, and x9<x10x_9 < x_{10}, then the value of 3x9+2x103x_9 + 2x_{10} is ____.

Tests: Recover missing observations from combined and partial means and variances.

Show solution
  1. All 10: ∑xi=50\sum x_i = 50 and ∑xi2=10(7+25)=320\sum x_i^2 = 10(7 + 25) = 320.

    Why: Variance =∑x2n−xˉ2= \dfrac{\sum x^2}{n} - \bar{x}^2.

  2. First 8: ∑xi=32\sum x_i = 32 and ∑xi2=8(3.5+16)=156\sum x_i^2 = 8(3.5 + 16) = 156.
  3. So x9+x10=18x_9 + x_{10} = 18 and x92+x102=164x_9^2 + x_{10}^2 = 164, giving 2x9x10=324−164=1602x_9x_{10} = 324 - 164 = 160, x9x10=80x_9x_{10} = 80.
  4. x9,x10x_9, x_{10} are roots of u2−18u+80=0u^2 - 18u + 80 = 0: 8 and 10. With x9<x10x_9 < x_{10}: x9=8x_9 = 8, x10=10x_{10} = 10.
  5. 3x9+2x10=24+20=443x_9 + 2x_{10} = 24 + 20 = 44.
AnswerAnswer: 44
Ask about this question
Q13

Mathematics, Question 13 (4 marks)

Conic sections · +4
Consider the ellipse EE given by x218+y212=1\dfrac{x^2}{18} + \dfrac{y^2}{12} = 1. Let HH be the hyperbola whose eccentricity is the reciprocal of the eccentricity of EE and whose foci are the same as that of EE. Let PP and QQ be the points of intersection of HH and the parabola 5 y=x2\sqrt{5}\,y = x^2 in the first quadrant. Let dd be the distance between PP and QQ. If aa and bb are the integers such that d2=a+b5d^2 = a + b\sqrt{5}, then the value of a−ba - b is ____.

Tests: Build a confocal hyperbola from eccentricity data and intersect it with a parabola.

Show solution
  1. Ellipse: e2=1−1218=13e^2 = 1 - \dfrac{12}{18} = \dfrac{1}{3}, foci (±18⋅13,0)=(±6,0)(\pm\sqrt{18 \cdot \tfrac{1}{3}}, 0) = (\pm\sqrt{6}, 0).
  2. Hyperbola x2A2−y2B2=1\dfrac{x^2}{A^2} - \dfrac{y^2}{B^2} = 1 with eH=3e_H = \sqrt{3} and AeH=6Ae_H = \sqrt{6}: A2=2A^2 = 2, B2=A2(eH2−1)=4B^2 = A^2(e_H^2 - 1) = 4. So H:x22−y24=1H: \dfrac{x^2}{2} - \dfrac{y^2}{4} = 1.
  3. Put x2=5 yx^2 = \sqrt{5}\,y: 5 y2−y24=1\dfrac{\sqrt{5}\,y}{2} - \dfrac{y^2}{4} = 1, i.e. y2−25 y+4=0y^2 - 2\sqrt{5}\,y + 4 = 0, so y=5±1y = \sqrt{5} \pm 1 (both positive).
  4. P=(5+5,5+1)P = \left(\sqrt{5 + \sqrt{5}}, \sqrt{5} + 1\right), Q=(5−5,5−1)Q = \left(\sqrt{5 - \sqrt{5}}, \sqrt{5} - 1\right), using x2=5 y=5±5x^2 = \sqrt{5}\,y = 5 \pm \sqrt{5}.
  5. d2=(5+5)+(5−5)−225−5+22=14−45d^2 = (5 + \sqrt{5}) + (5 - \sqrt{5}) - 2\sqrt{25 - 5} + 2^2 = 14 - 4\sqrt{5}.
  6. a=14a = 14, b=−4b = -4, so a−b=18a - b = 18.
AnswerAnswer: 18
Ask about this question
Q14

Mathematics, Question 14 (4 marks)

Continuity · +4
For a real number α\alpha, let [α][\alpha] denote the greatest integer less than or equal to α\alpha. For a finite set SS, let ∣S∣|S| denote the number of elements in the set SS. Consider the functions f:(−3,3)→(−∞,∞)f : (-3, 3) \to (-\infty, \infty) and g:(−3,3)→(−∞,∞)g : (-3, 3) \to (-\infty, \infty) defined by f(x)=[x3]log⁡e(1+sin⁡2(π(x−[x])))f(x) = [x^3]\log_e\left(1 + \sin^2(\pi(x - [x]))\right) and g(x)=x3sin⁡2(πlog⁡e(1+x−[x]))g(x) = x^3\sin^2\left(\pi\log_e(1 + x - [x])\right). Let A={x∈(−3,3):f is discontinuous at x}A = \{x \in (-3, 3) : f \text{ is discontinuous at } x\} and B={x∈(−3,3):g is discontinuous at x}B = \{x \in (-3, 3) : g \text{ is discontinuous at } x\}. Then the value of ∣A∣+2∣B∣−∣A∩B∣|A| + 2|B| - |A \cap B| is ____.

Tests: Locate discontinuities of products involving the greatest integer function.

Show solution
  1. sin⁡2(π(x−[x]))=sin⁡2(πx−π[x])=sin⁡2(πx)\sin^2(\pi(x - [x])) = \sin^2(\pi x - \pi[x]) = \sin^2(\pi x), so the log factor log⁡e(1+sin⁡2πx)\log_e(1 + \sin^2 \pi x) is continuous and is 0 exactly at integers.

    Why: sin⁡2\sin^2 has period π\pi.

  2. [x3][x^3] jumps where x3x^3 is an integer: x3∈{−26,…,26}x^3 \in \{-26, \ldots, 26\} for x∈(−3,3)x \in (-3, 3), i.e. 53 points.
  3. At such a point ff jumps unless the log factor is 0 there, i.e. unless xx is an integer. The integers −2,−1,0,1,2-2, -1, 0, 1, 2 have integer cubes, and there f→0f \to 0 from both sides with f(x)=0f(x) = 0. So ∣A∣=53−5=48|A| = 53 - 5 = 48.
  4. For gg: 1+x−[x]∈[1,2)1 + x - [x] \in [1, 2) and is continuous except at integers. At an integer nn: g(n)=n3sin⁡20=0g(n) = n^3\sin^2 0 = 0 and the right limit is 0, but the left limit is n3sin⁡2(πlog⁡e2)≠0n^3\sin^2(\pi\log_e 2) \ne 0 unless n=0n = 0.

    Why: πlog⁡e2≈2.18\pi\log_e 2 \approx 2.18 is not a multiple of π\pi.

  5. So B={−2,−1,1,2}B = \{-2, -1, 1, 2\}, ∣B∣=4|B| = 4; these are integers, where ff is continuous, so A∩B=∅A \cap B = \emptyset.
  6. ∣A∣+2∣B∣−∣A∩B∣=48+8−0=56|A| + 2|B| - |A \cap B| = 48 + 8 - 0 = 56.
AnswerAnswer: 56
Ask about this question

Mathematics, Section 4: 2 question stems with 2 questions each, numerical value answer (truncate or round off to two decimal places): +2 if correct, 0 in all other cases

Q15

Mathematics, Question 15 (2 marks)

Trigonometric equations · +2
Paragraph: Consider the curve C1C_1 given by y=e−xy = e^{-x} for x∈[0,10π]x \in [0, 10\pi], and the curve C2C_2 given by y=e−x(sin⁡x+cos⁡x)y = e^{-x}(\sin x + \cos x) for x∈[0,10π]x \in [0, 10\pi]. Let nn be the total number of points of intersection of the curves C1C_1 and C2C_2. Suppose that α1,α2,…,αn∈[0,10π]\alpha_1, \alpha_2, \ldots, \alpha_n \in [0, 10\pi] are the xx-coordinates of the points of intersection of the curves C1C_1 and C2C_2 such that α1<α2<⋯<αn\alpha_1 < \alpha_2 < \cdots < \alpha_n. Question: The value of nn is ____.

Tests: Reduce a curve-intersection count to a trigonometric equation on a closed interval.

Show solution
  1. e−x=e−x(sin⁡x+cos⁡x)e^{-x} = e^{-x}(\sin x + \cos x) and e−x>0e^{-x} > 0, so sin⁡x+cos⁡x=1\sin x + \cos x = 1, i.e. sin⁡(x+π4)=12\sin\left(x + \dfrac{\pi}{4}\right) = \dfrac{1}{\sqrt{2}}.
  2. x+π4=π4+2kπx + \dfrac{\pi}{4} = \dfrac{\pi}{4} + 2k\pi or 3π4+2kπ\dfrac{3\pi}{4} + 2k\pi, so x=2kπx = 2k\pi or x=π2+2kπx = \dfrac{\pi}{2} + 2k\pi.
  3. In [0,10π][0, 10\pi]: x=0,2π,…,10πx = 0, 2\pi, \ldots, 10\pi gives 6 values; x=π2+2kπx = \dfrac{\pi}{2} + 2k\pi for k=0,…,4k = 0, \ldots, 4 gives 5 values.
  4. n=6+5=11n = 6 + 5 = 11.
AnswerAnswer: 11
Ask about this question
Q16

Mathematics, Question 16 (2 marks)

Area under curves · +2
Paragraph: Consider the curve C1C_1 given by y=e−xy = e^{-x} for x∈[0,10π]x \in [0, 10\pi], and the curve C2C_2 given by y=e−x(sin⁡x+cos⁡x)y = e^{-x}(\sin x + \cos x) for x∈[0,10π]x \in [0, 10\pi]. Let nn be the total number of points of intersection of the curves C1C_1 and C2C_2. Suppose that α1,α2,…,αn∈[0,10π]\alpha_1, \alpha_2, \ldots, \alpha_n \in [0, 10\pi] are the xx-coordinates of the points of intersection of the curves C1C_1 and C2C_2 such that α1<α2<⋯<αn\alpha_1 < \alpha_2 < \cdots < \alpha_n. Question: Let β\beta be the area of the region enclosed between the curves C1C_1, C2C_2, and the lines x=α1x = \alpha_1 and x=α4x = \alpha_4. Then the value of −1πlog⁡e(β−2e−π2)-\dfrac{1}{\pi}\log_e\left(\beta - 2e^{-\frac{\pi}{2}}\right) is ____.

Tests: Find the area between two crossing curves by splitting at the crossings.

Show solution
  1. From Q15 the intersections in order are α1=0\alpha_1 = 0, α2=π2\alpha_2 = \dfrac{\pi}{2}, α3=2π\alpha_3 = 2\pi, α4=5π2\alpha_4 = \dfrac{5\pi}{2}.
  2. The gap is e−x(sin⁡x+cos⁡x−1)e^{-x}(\sin x + \cos x - 1): positive on (0,π2)\left(0, \dfrac{\pi}{2}\right), negative on (π2,2π)\left(\dfrac{\pi}{2}, 2\pi\right), positive on (2π,5π2)\left(2\pi, \dfrac{5\pi}{2}\right).

    Why: 2sin⁡(x+π/4)>1\sqrt{2}\sin(x + \pi/4) > 1 only when x+π/4x + \pi/4 is in (π/4,3π/4)(\pi/4, 3\pi/4) mod 2π2\pi.

  3. Antiderivative: ddx(−e−xcos⁡x)=e−x(sin⁡x+cos⁡x)\dfrac{d}{dx}\left(-e^{-x}\cos x\right) = e^{-x}(\sin x + \cos x), so G(x)=e−x(1−cos⁡x)G(x) = e^{-x}(1 - \cos x) has G′(x)=e−x(sin⁡x+cos⁡x−1)G'(x) = e^{-x}(\sin x + \cos x - 1).
  4. G(0)=0G(0) = 0, G(π2)=e−π/2G\left(\dfrac{\pi}{2}\right) = e^{-\pi/2}, G(2π)=0G(2\pi) = 0, G(5π2)=e−5π/2G\left(\dfrac{5\pi}{2}\right) = e^{-5\pi/2}.
  5. β=(e−π/2−0)+(e−π/2−0)+(e−5π/2−0)=2e−π/2+e−5π/2\beta = \left(e^{-\pi/2} - 0\right) + \left(e^{-\pi/2} - 0\right) + \left(e^{-5\pi/2} - 0\right) = 2e^{-\pi/2} + e^{-5\pi/2}.
  6. β−2e−π/2=e−5π/2\beta - 2e^{-\pi/2} = e^{-5\pi/2}, so −1πlog⁡e(e−5π/2)=52=2.5-\dfrac{1}{\pi}\log_e\left(e^{-5\pi/2}\right) = \dfrac{5}{2} = 2.5.
AnswerAnswer: 2.5
Ask about this question
Q17

Mathematics, Question 17 (2 marks)

Ellipse (angle between curves) · +2
Paragraph: Consider the ellipses given by x2+4y2=1x^2 + 4y^2 = 1 and 4x2+y2=14x^2 + y^2 = 1. Question: Let PP be the point in the first quadrant where the given ellipses intersect. If θ\theta is the acute angle between the tangents to the given ellipses at the point PP, then the value of 4tan⁡θ4\tan\theta is ____.

Tests: Find the angle between two curves at their intersection from tangent slopes.

Show solution
  1. Subtracting the equations: 3x2−3y2=03x^2 - 3y^2 = 0, so x2=y2=15x^2 = y^2 = \dfrac{1}{5} and P=(15,15)P = \left(\dfrac{1}{\sqrt{5}}, \dfrac{1}{\sqrt{5}}\right).
  2. x2+4y2=1x^2 + 4y^2 = 1: y′=−x4y=−14y' = -\dfrac{x}{4y} = -\dfrac{1}{4} at PP. 4x2+y2=14x^2 + y^2 = 1: y′=−4xy=−4y' = -\dfrac{4x}{y} = -4 at PP.
  3. tan⁡θ=∣m1−m21+m1m2∣=∣−14+41+1∣=158\tan\theta = \left|\dfrac{m_1 - m_2}{1 + m_1m_2}\right| = \left|\dfrac{-\tfrac{1}{4} + 4}{1 + 1}\right| = \dfrac{15}{8}.
  4. 4tan⁡θ=152=7.54\tan\theta = \dfrac{15}{2} = 7.5.
AnswerAnswer: 7.5
Ask about this question
Q18

Mathematics, Question 18 (2 marks)

Area under curves · +2
Paragraph: Consider the ellipses given by x2+4y2=1x^2 + 4y^2 = 1 and 4x2+y2=14x^2 + y^2 = 1. Question: If α\alpha is the area of the common region that lies inside both the given ellipses, then the value of cot⁡α\cot\alpha is ____.

Tests: Find the area common to two ellipses by splitting at their intersection and simplifying inverse trig terms.

Show solution
  1. The common region is symmetric in both axes, so α=4×\alpha = 4 \times (first-quadrant part). There, for 0≤x≤150 \le x \le \dfrac{1}{\sqrt{5}} the region lies under x2+4y2=1x^2 + 4y^2 = 1, and for 15≤x≤12\dfrac{1}{\sqrt{5}} \le x \le \dfrac{1}{2} under 4x2+y2=14x^2 + y^2 = 1.

    Why: At x=0x = 0 the first ellipse reaches only y=12y = \tfrac{1}{2}, the second y=1y = 1.

  2. I1=∫01/51−x22 dx=14[x1−x2+sin⁡−1x]01/5=110+14sin⁡−115I_1 = \displaystyle\int_0^{1/\sqrt{5}} \dfrac{\sqrt{1 - x^2}}{2}\,dx = \dfrac{1}{4}\left[x\sqrt{1 - x^2} + \sin^{-1}x\right]_0^{1/\sqrt{5}} = \dfrac{1}{10} + \dfrac{1}{4}\sin^{-1}\dfrac{1}{\sqrt{5}}.
  3. I2=∫1/51/21−4x2 dx=14[u1−u2+sin⁡−1u]2/51=π8−110−14sin⁡−125I_2 = \displaystyle\int_{1/\sqrt{5}}^{1/2} \sqrt{1 - 4x^2}\,dx = \dfrac{1}{4}\left[u\sqrt{1 - u^2} + \sin^{-1}u\right]_{2/\sqrt{5}}^{1} = \dfrac{\pi}{8} - \dfrac{1}{10} - \dfrac{1}{4}\sin^{-1}\dfrac{2}{\sqrt{5}} (with u=2xu = 2x).
  4. Using sin⁡−125=π2−sin⁡−115\sin^{-1}\dfrac{2}{\sqrt{5}} = \dfrac{\pi}{2} - \sin^{-1}\dfrac{1}{\sqrt{5}}: I1+I2=12sin⁡−115=12tan⁡−112I_1 + I_2 = \dfrac{1}{2}\sin^{-1}\dfrac{1}{\sqrt{5}} = \dfrac{1}{2}\tan^{-1}\dfrac{1}{2}.
  5. α=4(I1+I2)=2tan⁡−112\alpha = 4(I_1 + I_2) = 2\tan^{-1}\dfrac{1}{2}, so tan⁡α=2⋅121−14=43\tan\alpha = \dfrac{2 \cdot \tfrac{1}{2}}{1 - \tfrac{1}{4}} = \dfrac{4}{3}.
  6. cot⁡α=34=0.75\cot\alpha = \dfrac{3}{4} = 0.75.
AnswerAnswer: 0.75
Ask about this question

Physics, Section 1: 4 questions, only one option correct: +3 if correct, −1 if wrong, 0 if unanswered

Q1

Physics, Question 1 (3 marks)

Current electricity (drift velocity) · +3 / −1
A metal wire of cross-sectional area 0.5 mm20.5\ \mathrm{mm^2} and length 100 m is connected across a battery of e.m.f. 2 V and internal resistance 1 Ω1\ \Omega. The density, atomic mass and electrical conductivity of the metal are 6.35×103 kg m−36.35 \times 10^3\ \mathrm{kg\,m^{-3}}, 63.5 gm/mole and 2×108 mho m−12 \times 10^8\ \mathrm{mho\,m^{-1}}, respectively. Assuming one conduction electron per atom of the metal, the drift velocity (in mm s−1\mathrm{mm\,s^{-1}}) of the electrons in the wire is: [Take Avogadro's number as 6×10236 \times 10^{23} and charge of the electron as 1.6×10−191.6 \times 10^{-19} C.]
  1. (A)0.052
  2. (B)0.104
  3. (C)0.208
  4. (D)0.156

Tests: Find the drift velocity from the circuit current and the free-electron density of the metal.

Show solution
  1. Resistance of the wire: R=LσA=1002×108×0.5×10−6=1 ΩR = \dfrac{L}{\sigma A} = \dfrac{100}{2\times10^8 \times 0.5\times10^{-6}} = 1\ \Omega.
  2. Current: I=ER+r=21+1=1I = \dfrac{E}{R + r} = \dfrac{2}{1 + 1} = 1 A.
  3. Electron density (one per atom): n=ρNAM=6.35×103×6×102363.5×10−3=6×1028 m−3n = \dfrac{\rho N_A}{M} = \dfrac{6.35\times10^3 \times 6\times10^{23}}{63.5\times10^{-3}} = 6\times10^{28}\ \mathrm{m^{-3}}.

    Why: Moles per cubic metre is density divided by molar mass in kg/mol.

  4. vd=IneA=16×1028×1.6×10−19×0.5×10−6=14800 m s−1≈2.08×10−4 m s−1v_d = \dfrac{I}{neA} = \dfrac{1}{6\times10^{28} \times 1.6\times10^{-19} \times 0.5\times10^{-6}} = \dfrac{1}{4800}\ \mathrm{m\,s^{-1}} \approx 2.08\times10^{-4}\ \mathrm{m\,s^{-1}}.
  5. That is 0.208 mm s−10.208\ \mathrm{mm\,s^{-1}}.
AnswerAnswer: (C) 0.208 mm s−10.208\ \mathrm{mm\,s^{-1}}
Ask about this question
Q2

Physics, Question 2 (3 marks)

Radioactivity (production and decay) · +3 / −1
A nuclear reactor starts producing a radioactive nuclide XX from t=0t = 0, at a constant rate of α\alpha per second. Each decay of XX produces energy E0E_0, which is utilized to heat a liquid of mass mm and specific heat ss. Assuming no heat loss from the liquid and taking λ\lambda as the decay constant of XX, the rate of increase in the temperature of the liquid is:
  1. (A)αE0m s(1−e−λt)\dfrac{\alpha E_0}{m\,s}\left(1 - e^{-\lambda t}\right)
  2. (B)αE0m s(eλt−1)\dfrac{\alpha E_0}{m\,s}\left(e^{\lambda t} - 1\right)
  3. (C)λE0m s(1−e−λt)\dfrac{\lambda E_0}{m\,s}\left(1 - e^{-\lambda t}\right)
  4. (D)E0m s(α−λe−λt)\dfrac{E_0}{m\,s}\left(\alpha - \lambda e^{-\lambda t}\right)

Tests: Set up and solve the production-decay equation and turn the activity into a heating rate.

Show solution
  1. Number of nuclei: produced at α\alpha, decaying at λN\lambda N: dNdt=α−λN\dfrac{dN}{dt} = \alpha - \lambda N, with N(0)=0N(0) = 0.
  2. Solution: N=αλ(1−e−λt)N = \dfrac{\alpha}{\lambda}\left(1 - e^{-\lambda t}\right).

    Why: N rises towards the steady value α/λ where production balances decay.

  3. Decays per second (activity): λN=α(1−e−λt)\lambda N = \alpha\left(1 - e^{-\lambda t}\right), so the heating power is P=αE0(1−e−λt)P = \alpha E_0\left(1 - e^{-\lambda t}\right).
  4. No heat loss: ms dTdt=P⇒dTdt=αE0ms(1−e−λt)m s\,\dfrac{dT}{dt} = P \Rightarrow \dfrac{dT}{dt} = \dfrac{\alpha E_0}{m s}\left(1 - e^{-\lambda t}\right).
AnswerAnswer: (A) αE0m s(1−e−λt)\dfrac{\alpha E_0}{m\,s}\left(1 - e^{-\lambda t}\right)
Ask about this question
Q3

Physics, Question 3 (3 marks)

Prism and dispersion · +3 / −1
A beam of polychromatic light passes through a thin prism of prism angle 6∘6^\circ. The refractive index of the material of the prism varies with wavelength (λ)(\lambda) as n(λ)=αλ+βλ2n(\lambda) = \alpha\lambda + \dfrac{\beta}{\lambda^2}, where α=3 μm−1\alpha = 3\ \mu\mathrm{m^{-1}} and β=0.096 μm2\beta = 0.096\ \mu\mathrm{m^2}. If λmin⁡\lambda_{\min} is the wavelength at which the angle of minimum deviation DmD_m is smallest, then the correct value of DmD_m at λmin⁡\lambda_{\min} is
  1. (A)6.4∘6.4^\circ
  2. (B)4.8∘4.8^\circ
  3. (C)3.2∘3.2^\circ
  4. (D)2.4∘2.4^\circ

Tests: Minimise the refractive index over wavelength and use the thin-prism deviation formula.

Show solution
  1. Thin prism: Dm=(n−1)AD_m = (n - 1)A, so DmD_m is smallest where n(λ)n(\lambda) is smallest.
  2. dndλ=α−2βλ3=0⇒λ3=2βα=0.1923=0.064 μm3\dfrac{dn}{d\lambda} = \alpha - \dfrac{2\beta}{\lambda^3} = 0 \Rightarrow \lambda^3 = \dfrac{2\beta}{\alpha} = \dfrac{0.192}{3} = 0.064\ \mu\mathrm{m^3}, so λmin⁡=0.4 μ\lambda_{\min} = 0.4\ \mum.

    Why: The second derivative 6β/λ⁴ is positive, so this is a minimum.

  3. n=3×0.4+0.0960.16=1.2+0.6=1.8n = 3 \times 0.4 + \dfrac{0.096}{0.16} = 1.2 + 0.6 = 1.8.
  4. Dm=(1.8−1)×6∘=4.8∘D_m = (1.8 - 1) \times 6^\circ = 4.8^\circ.
AnswerAnswer: (B) 4.8∘4.8^\circ
Ask about this question
Q4

Physics, Question 4 (3 marks)

Central forces (radial oscillation of an orbit) · +3 / −1
A particle of mass mm, and angular momentum ℓ\ell is moving in a circular orbit of radius r0r_0 under the influence of an attractive force F⃗(r)=−kr2r^\vec{F}(r) = -\dfrac{k}{r^2}\hat{r}. Keeping its angular momentum unchanged, the particle is displaced radially by a small distance δr≪r0\delta r \ll r_0, due to which its radial distance varies periodically. The corresponding time period is:
  1. (A)2πℓ3mk2\dfrac{2\pi\ell^3}{mk^2}
  2. (B)2πmk2\pi\sqrt{\dfrac{m}{k}}
  3. (C)2πℓ33mk2\dfrac{2\pi\ell^3}{3mk^2}
  4. (D)2πℓ35mk2\dfrac{2\pi\ell^3}{5mk^2}

Tests: Find the period of small radial oscillations about a circular orbit using the effective potential.

Show solution
  1. With ℓ\ell fixed, the radial motion is that of a particle in the effective potential Ueff(r)=ℓ22mr2−krU_{\text{eff}}(r) = \dfrac{\ell^2}{2mr^2} - \dfrac{k}{r}.
  2. Circular orbit at its minimum: Ueff′(r0)=−ℓ2mr03+kr02=0⇒r0=ℓ2mkU_{\text{eff}}'(r_0) = -\dfrac{\ell^2}{mr_0^3} + \dfrac{k}{r_0^2} = 0 \Rightarrow r_0 = \dfrac{\ell^2}{mk}.
  3. Stiffness: Ueff′′(r0)=3ℓ2mr04−2kr03=3kr03−2kr03=kr03U_{\text{eff}}''(r_0) = \dfrac{3\ell^2}{mr_0^4} - \dfrac{2k}{r_0^3} = \dfrac{3k}{r_0^3} - \dfrac{2k}{r_0^3} = \dfrac{k}{r_0^3} (using ℓ2=mkr0\ell^2 = mkr_0).
  4. Radial angular frequency: ωr2=Ueff′′m=kmr03\omega_r^2 = \dfrac{U_{\text{eff}}''}{m} = \dfrac{k}{mr_0^3}, the same as the orbital ω2\omega^2.

    Why: For an inverse-square force a slightly disturbed orbit is a closed ellipse: one radial oscillation per revolution.

  5. T=2πmr03kT = 2\pi\sqrt{\dfrac{mr_0^3}{k}} with r03=ℓ6m3k3r_0^3 = \dfrac{\ell^6}{m^3k^3}: T=2πℓ6m2k4=2πℓ3mk2T = 2\pi\sqrt{\dfrac{\ell^6}{m^2k^4}} = \dfrac{2\pi\ell^3}{mk^2}.
AnswerAnswer: (A) 2πℓ3mk2\dfrac{2\pi\ell^3}{mk^2}
Ask about this question

Physics, Section 2: 5 questions, one or more options correct: +4 if all the correct options (and nothing else) are chosen; partial marks +3, +2 or +1 when only some correct options are chosen and no wrong one; 0 if unanswered; −1 in all other cases

Q5

Physics, Question 5 (4 marks)

Prism (minimum deviation) and plane mirror · +4 / −1
Consider two isosceles prisms 1 and 2 with prism angles A1A_1 and A2A_2 and refractive indices n1n_1 and n2n_2, respectively, as shown in the figure. The faces a1b1a_1b_1 and a2b2a_2b_2 are parallel to each other and perpendicular to the mirror MM. If a ray of light is incident on the face a1c1a_1c_1 and emerges from the face a2c2a_2c_2, then the correct statement(s) is/are: (The figure shows a horizontal mirror MM at the bottom. Prism 1 on the left has apex a1a_1 at the top, angle A1A_1 at a1a_1, its vertical face a1b1a_1b_1 on the right and its slanted face a1c1a_1c_1 on the left; prism 2 on the right is its mirror image, apex a2a_2 with angle A2A_2, vertical face a2b2a_2b_2 on the left, slanted face a2c2a_2c_2 on the right. A horizontal ray enters face a1c1a_1c_1 at angle of incidence i1i_1, leaves face a1b1a_1b_1 at angle e1e_1 to its horizontal normal, travels down to the mirror, reflects up and enters face a2b2a_2b_2 at angle i2i_2, and leaves face a2c2a_2c_2 horizontally at angle e2e_2. Each prism's symmetry axis (the perpendicular from the apex to the base, dashed) is extended up beyond the apex; the two extended axes meet above the mirror's centre at angle θ\theta.)
  1. (A)If both the prisms are at minimum deviation condition, then n2n1=sin⁡(A12)/sin⁡(A22)\dfrac{n_2}{n_1} = \sin\left(\dfrac{A_1}{2}\right) / \sin\left(\dfrac{A_2}{2}\right).
  2. (B)If prism 2 is at minimum deviation condition, then sin⁡i1=n2sin⁡(A22)\sin i_1 = n_2\sin\left(\dfrac{A_2}{2}\right) is always true.
  3. (C)If both the prisms 1 and 2 are thin and are at minimum deviation condition with angles of deviation δm1\delta_{m1} and δm2\delta_{m2}, respectively, then θ=δm12(n1−1)+δm22(n2−1)\theta = \dfrac{\delta_{m1}}{2(n_1 - 1)} + \dfrac{\delta_{m2}}{2(n_2 - 1)}.
  4. (D)If prism 1 is at minimum deviation condition, then sin⁡i2=n1sin⁡(A12)\sin i_2 = n_1\sin\left(\dfrac{A_1}{2}\right) is always true.

Tests: Chain two prisms through a plane mirror using the minimum-deviation condition and the thin-prism formula.

Show solution
  1. Link between the prisms. The normals to a1b1a_1b_1 and a2b2a_2b_2 are horizontal and the mirror is horizontal. Reflection reverses only the vertical component of the ray, so the ray meets a2b2a_2b_2 at the same angle to the horizontal at which it left a1b1a_1b_1: i2=e1i_2 = e_1.
  2. At minimum deviation the ray inside a prism makes r=A/2r = A/2 with both faces' normals, so sin⁡i=sin⁡e=nsin⁡A2\sin i = \sin e = n\sin\dfrac{A}{2}. For prism 1: sin⁡e1=n1sin⁡A12\sin e_1 = n_1\sin\dfrac{A_1}{2}; for prism 2: sin⁡i2=n2sin⁡A22\sin i_2 = n_2\sin\dfrac{A_2}{2}.
  3. (D) Prism 1 at minimum deviation: sin⁡i2=sin⁡e1=n1sin⁡A12\sin i_2 = \sin e_1 = n_1\sin\dfrac{A_1}{2}, whatever prism 2 does. True.
  4. (A) Both at minimum deviation: n1sin⁡A12=n2sin⁡A22n_1\sin\dfrac{A_1}{2} = n_2\sin\dfrac{A_2}{2}, so n2n1=sin⁡A12/sin⁡A22\dfrac{n_2}{n_1} = \sin\dfrac{A_1}{2} \Big/ \sin\dfrac{A_2}{2}. True.
  5. (B) Prism 2 at minimum deviation fixes sin⁡i2=n2sin⁡A22\sin i_2 = n_2\sin\dfrac{A_2}{2}. But i1i_1 equals e1=i2e_1 = i_2 only if prism 1 is also at minimum deviation; otherwise i1≠e1i_1 \ne e_1. So it is not always true. False.
  6. (C) Each symmetry axis bisects the apex angle, so it makes A1/2A_1/2 (and A2/2A_2/2) with the vertical faces. The two extended axes therefore meet at θ=A12+A22\theta = \dfrac{A_1}{2} + \dfrac{A_2}{2}. Thin prisms at minimum deviation: δm=(n−1)A\delta_m = (n - 1)A, so A1=δm1n1−1A_1 = \dfrac{\delta_{m1}}{n_1 - 1}, A2=δm2n2−1A_2 = \dfrac{\delta_{m2}}{n_2 - 1} and θ=δm12(n1−1)+δm22(n2−1)\theta = \dfrac{\delta_{m1}}{2(n_1 - 1)} + \dfrac{\delta_{m2}}{2(n_2 - 1)}. True.

    Why: The dashed lines in the figure are the bisectors of the apex angles, not the extended slanted faces (those would give A1 + A2).

AnswerAnswer: (A), (C), (D)
Ask about this question
Q6

Physics, Question 6 (4 marks)

Motion in electric, magnetic and gravitational fields · +4 / −1
In a vacuum chamber, a particle of charge 1 μ1\ \muC and mass 1 mg is projected with a velocity (i^+2j^) m s−1(\hat{i} + 2\hat{j})\ \mathrm{m\,s^{-1}} from the XZXZ plane at time t=0t = 0 in an electric field of 1 i^ V m−11\,\hat{i}\ \mathrm{V\,m^{-1}}. At t=0.2t = 0.2 s, the electric field is switched off and a magnetic field of 6 j^6\,\hat{j} T is switched on. The acceleration due to gravity is −10 j^ m s−2-10\,\hat{j}\ \mathrm{m\,s^{-2}}. Correct option(s) is/are:
  1. (A)The vertical distance of the particle from the XZXZ plane at t=0.3t = 0.3 s is 15 cm.
  2. (B)The vertical distance of the particle from the XZXZ plane at t=0.4t = 0.4 s is 10 cm.
  3. (C)The radius of the trajectory of the particle for t>0.2t > 0.2 s is 20 cm.
  4. (D)The particle will be in the XZXZ plane at t=0.35t = 0.35 s.

Tests: Split the motion into components: electric and magnetic forces in the XZ directions, gravity along y.

Show solution
  1. qm=10−610−6=1 C kg−1\dfrac{q}{m} = \dfrac{10^{-6}}{10^{-6}} = 1\ \mathrm{C\,kg^{-1}}. For 0≤t≤0.20 \le t \le 0.2 s: ax=qEm=1 m s−2a_x = \dfrac{qE}{m} = 1\ \mathrm{m\,s^{-2}}, ay=−10 m s−2a_y = -10\ \mathrm{m\,s^{-2}}.
  2. At t=0.2t = 0.2 s: vx=1+0.2=1.2v_x = 1 + 0.2 = 1.2 m/s, vy=2−10(0.2)=0v_y = 2 - 10(0.2) = 0, y=2(0.2)−5(0.2)2=0.2y = 2(0.2) - 5(0.2)^2 = 0.2 m.
  3. For t>0.2t > 0.2 s the field is Bj^B\hat{j}: the magnetic force qv⃗×B⃗q\vec{v}\times\vec{B} is perpendicular to j^\hat{j}, so it only turns the velocity in the XZXZ directions. The yy-motion is free fall from rest at y=0.2y = 0.2 m: y=0.2−5(t−0.2)2y = 0.2 - 5(t - 0.2)^2.

    Why: A field along y exerts no force along y, and gravity is along y only.

  4. (A) t=0.3t = 0.3 s: y=0.2−5(0.01)=0.15y = 0.2 - 5(0.01) = 0.15 m =15= 15 cm. True.
  5. (B) t=0.4t = 0.4 s: y=0.2−5(0.04)=0y = 0.2 - 5(0.04) = 0, not 10 cm. False.
  6. (D) y=0y = 0 first at t=0.4t = 0.4 s (at 0.350.35 s, y=0.2−5(0.0225)≈0.09y = 0.2 - 5(0.0225) \approx 0.09 m). False.
  7. (C) The speed in the XZXZ plane is 1.21.2 m/s, so r=mvqB=1.21×6=0.2r = \dfrac{mv}{qB} = \dfrac{1.2}{1 \times 6} = 0.2 m =20= 20 cm (a helix about the yy direction). True.
AnswerAnswer: (A), (C)
Ask about this question
Q7

Physics, Question 7 (4 marks)

Electric potential (equipotential loci) · +4 / −1
Two charges Q1=qQ_1 = q and Q2=mqQ_2 = mq are placed at the points P1(a,b)P_1(a, b) and P2(ma,mb)P_2(ma, mb), respectively, in the XYXY plane, where a,b≠0a, b \ne 0 and m≠0,1m \ne 0, 1. If V1V_1 is the potential at a point in the XYXY plane due to charge Q1Q_1 and V2V_2 is the potential at that point due to charge Q2Q_2. Correct statement(s) for the points at which ∣V1∣=∣V2∣|V_1| = |V_2| is/are:
  1. (A)For m=−1m = -1, locus of these points is ax+by=0ax + by = 0.
  2. (B)For m=2m = 2, the locus of these points is a circle of radius 23a2+b2\dfrac{2}{3}\sqrt{a^2 + b^2} centered at (23a,23b)\left(\dfrac{2}{3}a, \dfrac{2}{3}b\right)
  3. (C)For m=−2m = -2, the locus of these points is a circle of radius 2a2+b22\sqrt{a^2 + b^2} centered at (2a,2b)(2a, 2b)
  4. (D)For m=−3m = -3, locus of these points is 3bx+3ay=03bx + 3ay = 0.

Tests: Recognise the locus of points whose distances to two fixed points are in a fixed ratio.

Show solution
  1. ∣V1∣=∣V2∣  ⟺  ∣q∣r1=∣m∣∣q∣r2  ⟺  r2=∣m∣ r1|V_1| = |V_2| \iff \dfrac{|q|}{r_1} = \dfrac{|m||q|}{r_2} \iff r_2 = |m|\,r_1, where r1,r2r_1, r_2 are distances to P1P_1, P2P_2.
  2. For ∣m∣=1|m| = 1 this is the perpendicular bisector of P1P2P_1P_2; for ∣m∣=k≠1|m| = k \ne 1 it is an Apollonius circle with centre k2P1−P2k2−1\dfrac{k^2P_1 - P_2}{k^2 - 1} and radius k ∣P1P2∣k2−1\dfrac{k\,|P_1P_2|}{k^2 - 1}.

    Why: Expand ∣X−P2∣2=k2∣X−P1∣2|X - P_2|^2 = k^2|X - P_1|^2 and complete the square.

  3. (A) m=−1m = -1: P2=(−a,−b)P_2 = (-a, -b), r1=r2r_1 = r_2. The perpendicular bisector of P1P2P_1P_2 passes through the origin perpendicular to (a,b)(a, b): ax+by=0ax + by = 0. True.
  4. (B) m=2m = 2, k=2k = 2, P2=2P1P_2 = 2P_1: centre 4P1−2P13=23(a,b)\dfrac{4P_1 - 2P_1}{3} = \dfrac{2}{3}(a, b), radius 2∣P1∣3=23a2+b2\dfrac{2|P_1|}{3} = \dfrac{2}{3}\sqrt{a^2 + b^2}. True.
  5. (C) m=−2m = -2, k=2k = 2, P2=−2P1P_2 = -2P_1: centre 4P1+2P13=(2a,2b)\dfrac{4P_1 + 2P_1}{3} = (2a, 2b), radius 2×3∣P1∣3=2a2+b2\dfrac{2 \times 3|P_1|}{3} = 2\sqrt{a^2 + b^2}. True.
  6. (D) m=−3m = -3 gives k=3≠1k = 3 \ne 1, so the locus is a circle (centre 9P1+3P18=32(a,b)\dfrac{9P_1 + 3P_1}{8} = \dfrac{3}{2}(a, b)), not a straight line. False.
AnswerAnswer: (A), (B), (C)
Ask about this question
Q8

Physics, Question 8 (4 marks)

Electric dipole in a uniform field · +4 / −1
Consider an electric dipole comprising two charges +q+q and −q-q each with mass mm, separated by a fixed distance dd and initially at rest with its dipole moment pointing along i^\hat{i}. A uniform electric field Ej^E\hat{j} is turned on at time t=0t = 0 and it is turned off at t=tft = t_f, when the dipole moment makes an angle θf\theta_f with i^\hat{i}. Neglecting any sources of energy loss, correct option(s) is/are:
  1. (A)The center of mass of the dipole is deflected towards j^\hat{j} in the presence of the field.
  2. (B)If the magnitude of the final angular velocity ωf=2qEmd\omega_f = \sqrt{\dfrac{2qE}{md}}, then θf=π6\theta_f = \dfrac{\pi}{6}.
  3. (C)If θf=π/3\theta_f = \pi/3, then the change in kinetic energy of the dipole is given by 23 qEd2\sqrt{3}\,qEd.
  4. (D)For θf=π/4\theta_f = \pi/4, the dipole rotates around its center of mass with a constant angular velocity after t>tft > t_f.

Tests: Use zero net force and energy conservation for a dipole released in a uniform field.

Show solution
  1. (A) In a uniform field the forces +qEj^+qE\hat{j} and −qEj^-qE\hat{j} cancel: no net force, so the centre of mass (at rest) stays put. False.
  2. The torque turns p⃗\vec{p} from i^\hat{i} towards j^\hat{j}. When p⃗\vec{p} makes θ\theta with i^\hat{i}, its angle with E⃗\vec{E} is π2−θ\dfrac{\pi}{2} - \theta, so U=−pEcos⁡(π2−θ)=−qEdsin⁡θU = -pE\cos\left(\dfrac{\pi}{2} - \theta\right) = -qEd\sin\theta and the kinetic energy gained is qEdsin⁡θqEd\sin\theta.
  3. Moment of inertia about the centre: I=2m(d2)2=md22I = 2m\left(\dfrac{d}{2}\right)^2 = \dfrac{md^2}{2}. So 12⋅md22 ω2=qEdsin⁡θ⇒ω2=4qEsin⁡θmd\dfrac{1}{2}\cdot\dfrac{md^2}{2}\,\omega^2 = qEd\sin\theta \Rightarrow \omega^2 = \dfrac{4qE\sin\theta}{md}.
  4. (B) ωf2=2qEmd\omega_f^2 = \dfrac{2qE}{md} gives sin⁡θf=12\sin\theta_f = \dfrac{1}{2}, θf=π6\theta_f = \dfrac{\pi}{6} (the first time, on the way to π/2\pi/2). True.
  5. (C) θf=π/3\theta_f = \pi/3: ΔK=qEdsin⁡π3=32qEd\Delta K = qEd\sin\dfrac{\pi}{3} = \dfrac{\sqrt{3}}{2}qEd, not 23 qEd2\sqrt{3}\,qEd. False.
  6. (D) After tft_f no force or torque acts, and the centre of mass is at rest, so the dipole spins about its centre of mass with constant ω\omega (here ωf2=22 qEmd\omega_f^2 = \dfrac{2\sqrt{2}\,qE}{md}). True.
AnswerAnswer: (B), (D)
Ask about this question
Q9

Physics, Question 9 (4 marks)

Thermodynamic processes · +4 / −1
Ten moles of an ideal monoatomic gas, initially in state a\boldsymbol{a} at atmospheric pressure and temperature Ta=27∘CT_a = 27^\circ\mathrm{C}, is enclosed in a metal cylinder of volume V0V_0 fitted with a frictionless piston. The gas is suddenly compressed to state b\boldsymbol{b} with volume V0/3V_0/3. Now, keeping the piston stationary, the cylinder is submerged in a water bath of temperature 11∘C11^\circ\mathrm{C} until the gas reaches the temperature of the water bath, which is denoted as state c\boldsymbol{c}. Finally, while still in the water bath, the piston is brought slowly to its initial position, which is denoted as state f\boldsymbol{f}. If RR is universal gas constant, then the correct option(s) is/are: [Given: 91/3=2.089^{1/3} = 2.08]
  1. (A)The schematic P-V diagram of the processes described above is: (a P-V graph with dashed vertical lines at V0/3V_0/3 and V0V_0: from aa at V0V_0 a curve rises steeply leftwards to bb at V0/3V_0/3; a vertical line drops from bb to cc at V0/3V_0/3; from cc a flatter curve runs right to ff at V0V_0, with ff just below aa)
  2. (B)The change in internal energy in going from state a\boldsymbol{a} to b\boldsymbol{b} is 4860R4860R.
  3. (C)The net change in the internal energy in the whole process is −240R-240R.
  4. (D)The pressure and temperature of the state b\boldsymbol{b} are 2.08 times the atmospheric pressure and 624 K, respectively.

Tests: Track temperature, pressure and internal energy through an adiabatic, an isochoric and an isothermal step.

Show solution
  1. a→ba \rightarrow b is sudden: no time for heat exchange, so it is adiabatic, with γ=53\gamma = \dfrac{5}{3} and TVγ−1TV^{\gamma - 1} constant (the given 91/39^{1/3} shows the paper means this law).
  2. Tb=Ta 32/3=300×91/3=300×2.08=624T_b = T_a\,3^{2/3} = 300 \times 9^{1/3} = 300 \times 2.08 = 624 K; Pb=Pa 35/3=3×2.08 Pa=6.24 PaP_b = P_a\,3^{5/3} = 3 \times 2.08\,P_a = 6.24\,P_a.
  3. (D) The temperature 624 K is right, but the pressure is 6.246.24 times atmospheric, not 2.082.08. False.
  4. (B) ΔUab=nCVΔT=10×32R×(624−300)=15R×324=4860R\Delta U_{ab} = nC_V\Delta T = 10 \times \dfrac{3}{2}R \times (624 - 300) = 15R \times 324 = 4860R. True.
  5. (C) UU depends only on TT: the gas ends at the bath temperature, 284 K. ΔU=15R(284−300)=−240R\Delta U = 15R(284 - 300) = -240R. True.
  6. (A) a→ba \rightarrow b: steep adiabatic curve up to V0/3V_0/3. b→cb \rightarrow c: isochoric cooling, a vertical drop at V0/3V_0/3. c→fc \rightarrow f: slow expansion in the bath, an isotherm at 284 K back to V0V_0, flatter than the adiabat. ff lies just below aa since Pf/Pa=284/300P_f/P_a = 284/300. The diagram shows exactly this. True.
AnswerAnswer: (A), (B), (C)
Ask about this question

Physics, Section 3: 5 questions, numerical value answer (truncate or round off to two decimal places): +4 if correct, 0 otherwise

Q10

Physics, Question 10 (4 marks)

Measuring instruments (screw gauge, zero error) · +4
Two thin wires, Wire-1 of diameter 0.650 mm and Wire-2 of unknown diameter dd are given. To obtain the value of dd, the diameters of the two wires are measured with a screw gauge. The screw gauge has a pitch of 0.5 mm and there are 100 divisions on the circular scale (CS). The smallest division on the linear scale (LS) is 0.5 mm. The table shows the readings of LS and CS for the measurements. The value of dd (in μ\mum) is:
LS (mm)CS
Wire-10.542
Wire-21.595

Tests: Use a wire of known diameter to find a screw gauge's zero error and correct another reading.

Show solution
  1. Least count =pitchCS divisions=0.5100=0.005= \dfrac{\text{pitch}}{\text{CS divisions}} = \dfrac{0.5}{100} = 0.005 mm.
  2. Wire-1 reading: 0.5+42×0.005=0.7100.5 + 42 \times 0.005 = 0.710 mm. Its true diameter is 0.650 mm, so the gauge has a zero error of +0.060+0.060 mm.

    Why: The known wire calibrates the gauge: reading minus true value is the zero error.

  3. Wire-2 reading: 1.5+95×0.005=1.9751.5 + 95 \times 0.005 = 1.975 mm.
  4. Corrected: d=1.975−0.060=1.915d = 1.975 - 0.060 = 1.915 mm =1915 μ= 1915\ \mum.
AnswerAnswer: 1915
Ask about this question
Q11

Physics, Question 11 (4 marks)

Errors in measurement (single-slit diffraction) · +4
In a single slit diffraction experiment, a slit of width (0.016±0.002)(0.016 \pm 0.002) mm is used to measure the wavelength of a monochromatic light source. In the diffraction pattern, the angular distance between the central maximum and first minimum is measured to be (2∘±40′)(2^\circ \pm 40'). The value of the fractional error in the measurement of wavelength is: [Given: sin⁡(2∘)=0.035\sin(2^\circ) = 0.035]

Tests: Propagate the errors in slit width and angle into the wavelength from a sin θ = λ.

Show solution
  1. First minimum: asin⁡θ=λa\sin\theta = \lambda, so Δλλ=Δaa+cos⁡θ Δθsin⁡θ\dfrac{\Delta\lambda}{\lambda} = \dfrac{\Delta a}{a} + \dfrac{\cos\theta\,\Delta\theta}{\sin\theta}.

    Why: Differentiate ln⁡λ=ln⁡a+ln⁡sin⁡θ\ln\lambda = \ln a + \ln\sin\theta and add the error magnitudes.

  2. Δaa=0.0020.016=0.125\dfrac{\Delta a}{a} = \dfrac{0.002}{0.016} = 0.125.
  3. Δθ=40′=23∘=23×π180≈0.01164\Delta\theta = 40' = \dfrac{2}{3}^\circ = \dfrac{2}{3}\times\dfrac{\pi}{180} \approx 0.01164 rad. Then cos⁡2∘×0.011640.035≈0.9994×0.011640.035≈0.332\dfrac{\cos 2^\circ \times 0.01164}{0.035} \approx \dfrac{0.9994 \times 0.01164}{0.035} \approx 0.332.

    Why: For a small angle this is just Δθ/θ=(2/3)/2=1/3\Delta\theta/\theta = (2/3)/2 = 1/3.

  4. Δλλ≈0.125+0.332=0.457≈0.46\dfrac{\Delta\lambda}{\lambda} \approx 0.125 + 0.332 = 0.457 \approx 0.46. The key's range 0.43 to 0.50 allows for the small-angle and rounding variants.
AnswerAnswer: 0.46
Ask about this question
Q12

Physics, Question 12 (4 marks)

Polarisation by reflection (Brewster's law) · +4
As shown in the figure, a ray ABAB of unpolarized light enters from water of refractive index nw=4/3n_w = 4/3 into a medium of refractive index np=4/3n_p = 4/\sqrt{3} after passing through a glass plate of refractive index ng=1.5n_g = 1.5 and a layer of water. At a particular incident angle ii the reflected ray CDCD is polarized in the direction as shown in the figure. The value of ii (in degrees) is: (The figure shows horizontal layers, from bottom to top: water (nw=4/3n_w = 4/3), a glass plate (ng=1.5n_g = 1.5), a layer of water (nw=4/3n_w = 4/3) and the medium np=4/3n_p = 4/\sqrt{3}. The ray ABAB in the bottom water, marked with dots and strokes (unpolarised), meets the glass at BB at angle ii to the normal, crosses glass and water, and at the water / npn_p interface is partly refracted up into npn_p and partly reflected back down through the water and glass, leaving at CC as the ray CDCD, marked with dots only.)

Tests: Apply Brewster's law at the right interface and carry the angle through parallel layers with n sin θ constant.

Show solution
  1. CDCD carries only dots: it is completely polarised (vibrations perpendicular to the plane of incidence). That happens when the reflection at the water / npn_p interface is at Brewster's angle.
  2. Brewster's law for light in water meeting the medium npn_p: tan⁡θB=npnw=4/34/3=3\tan\theta_B = \dfrac{n_p}{n_w} = \dfrac{4/\sqrt{3}}{4/3} = \sqrt{3}, so θB=60∘\theta_B = 60^\circ in the upper water layer.
  3. For parallel layers, nsin⁡θn\sin\theta is the same in every layer (Snell's law at each face). The bottom water and the upper water have the same nwn_w, so the angle in the bottom water equals the angle in the upper water: i=60∘i = 60^\circ.

    Why: The glass plate only shifts the ray sideways; it does not change the angle in water on either side.

  4. Check the glass: sin⁡θg=(4/3)sin⁡60∘1.5≈0.77<1\sin\theta_g = \dfrac{(4/3)\sin 60^\circ}{1.5} \approx 0.77 < 1, so the ray does get through.
AnswerAnswer: 60
Ask about this question
Q13

Physics, Question 13 (4 marks)

Galvanometer (half-deflection method) · +4
As shown in the figure, the resistance of a galvanometer GG can be found by the half-deflection method. Here the resistance R2R_2 is adjusted such that when the key KK is closed the deflection in the galvanometer becomes half of the value as compared to when KK is open. Half-deflection is obtained at R2=4 ΩR_2 = 4\ \Omega and thus the galvanometer resistance is found to be 6 Ω6\ \Omega. In this half-deflection condition the current (in mA) through the resistor R1R_1 is: (The figure shows a 10 V battery in series with the resistor R1R_1 and the galvanometer GG; the variable resistor R2R_2 in series with the key KK is connected directly across GG.)

Tests: Use the exact half-deflection condition to find the series resistance and then the main current.

Show solution
  1. KK open: Ig0=ER1+GI_{g0} = \dfrac{E}{R_1 + G}. KK closed: R2R_2 is in parallel with GG, the main current is I=ER1+GR2G+R2I = \dfrac{E}{R_1 + \dfrac{GR_2}{G + R_2}} and Ig=I R2G+R2=ER2R1(G+R2)+GR2I_g = I\,\dfrac{R_2}{G + R_2} = \dfrac{ER_2}{R_1(G + R_2) + GR_2}.
  2. Half deflection, Ig=12Ig0I_g = \dfrac{1}{2}I_{g0}: 2R2(R1+G)=R1(G+R2)+GR2⇒G=R1R2R1−R22R_2(R_1 + G) = R_1(G + R_2) + GR_2 \Rightarrow G = \dfrac{R_1R_2}{R_1 - R_2}.

    Why: Only when R1≫GR_1 \gg G does this reduce to the familiar G≈R2G \approx R_2; here G=6 Ω≠R2G = 6\ \Omega \ne R_2, so R1R_1 is not large.

  3. With G=6G = 6 and R2=4R_2 = 4: 6(R1−4)=4R1⇒R1=12 Ω6(R_1 - 4) = 4R_1 \Rightarrow R_1 = 12\ \Omega.
  4. Current through R1R_1 with KK closed: I=1012+6×410=1014.4≈0.69444I = \dfrac{10}{12 + \dfrac{6 \times 4}{10}} = \dfrac{10}{14.4} \approx 0.69444 A.
  5. I≈694.44I \approx 694.44 mA.
AnswerAnswer: 694.44
Ask about this question
Q14

Physics, Question 14 (4 marks)

Units and dimensions (change of units) · +4
In a new system of units, the units of mass, length, time and current are 5 kg, 5 m, 5 s and 5 A, respectively. If μ0\mu_0 and ϵ0\epsilon_0 are the permeability and permittivity of free space, respectively, then in this new system of units, the magnitude of one SI unit of μ0/ϵ0\sqrt{\mu_0/\epsilon_0}, is:

Tests: Convert a quantity between unit systems using its dimensional formula.

Show solution
  1. μ0/ϵ0\sqrt{\mu_0/\epsilon_0} is the impedance of free space (about 377 Ω377\ \Omega): it has the unit of resistance, the ohm.

    Why: μ0c\mu_0 c and 1/(ϵ0c)1/(\epsilon_0 c) both equal it, and μ0c\mu_0 c has the unit H s−1=Ω\mathrm{H\,s^{-1}} = \Omega.

  2. [Ω]=[V][A]=WA2=ML2T−3I−2[\Omega] = \dfrac{[V]}{[A]} = \dfrac{\mathrm{W}}{\mathrm{A^2}} = M L^2 T^{-3} I^{-2}.
  3. One new unit of resistance =5×5253×52 Ω=51+2−3−2 Ω=5−2 Ω=125 Ω= \dfrac{5 \times 5^2}{5^3 \times 5^2}\ \Omega = 5^{1 + 2 - 3 - 2}\ \Omega = 5^{-2}\ \Omega = \dfrac{1}{25}\ \Omega.
  4. So one SI ohm =25= 25 new units.
AnswerAnswer: 25
Ask about this question

Physics, Section 4: 2 question stems with 2 questions each, numerical value answer (truncate or round off to two decimal places): +2 if correct, 0 otherwise

Q15

Physics, Question 15 (2 marks)

Fluid flow (Torricelli's law, draining between tanks) · +2
Paragraph: A container of height 2 m, length 2 m and breadth 1 m is made of insulating vertical walls and two large area horizontal metal plates (M1\mathrm{M_1} and M2\mathrm{M_2}) which extend far beyond the vertical walls in all directions. The container is partitioned into two equal chambers with a thin insulating vertical wall. The partition wall contains a small hole of cross-sectional area 10 cm2\sqrt{10}\ \mathrm{cm^2} near its bottom edge. Initially the hole is closed and the left chamber of the container is completely filled with a liquid of dielectric constant ϵr=15\epsilon_r = 15 and the right chamber is empty (ϵr=1\epsilon_r = 1). At time t=0t = 0, the hole is opened and the liquid flows from the left chamber to the right chamber. In both the chambers, the space above the liquid has ϵr=1\epsilon_r = 1 and is maintained at atmospheric pressure. The schematic of the container at a time t>0t > 0 is shown in the figure. [Given: acceleration due to gravity is 10 m s−210\ \mathrm{m\,s^{-2}}.] (The figure shows plate M1\mathrm{M_1} on top and M2\mathrm{M_2} at the bottom, 2 m apart, both extending beyond the container; each chamber is 1 m wide in the figure; the left chamber holds liquid with ϵr=15\epsilon_r = 15 to some height below the top, the right chamber a shallower layer of the same liquid, with the hole at the foot of the partition.) Question: The height (in m) of the liquid in left chamber at t=500t = 500 s is:

Tests: Set up the draining equation between two connected tanks, where the flow depends on the level difference.

Show solution
  1. Each chamber has base 1×1=1 m21 \times 1 = 1\ \mathrm{m^2}. With heights h1h_1 (left) and h2h_2 (right), volume is conserved: h1+h2=2h_1 + h_2 = 2 m.
  2. The hole is at the bottom and both surfaces are at atmospheric pressure, so the efflux speed is set by the level difference x=h1−h2x = h_1 - h_2: v=2gxv = \sqrt{2gx}.

    Why: Bernoulli between the left surface and the jet, with the right side's hydrostatic pressure at the hole.

  3. dh1dt=−av\dfrac{dh_1}{dt} = -av, dh2dt=+av\dfrac{dh_2}{dt} = +av (with A=1 m2A = 1\ \mathrm{m^2}), so dxdt=−2a2g x\dfrac{dx}{dt} = -2a\sqrt{2g}\,\sqrt{x}, with a=10×10−4 m2a = \sqrt{10}\times10^{-4}\ \mathrm{m^2} and 2g=20\sqrt{2g} = \sqrt{20}: 2a2g=2×10−4200=22×10−3 m1/2s−12a\sqrt{2g} = 2\times10^{-4}\sqrt{200} = 2\sqrt{2}\times10^{-3}\ \mathrm{m^{1/2}s^{-1}}.
  4. Integrate: 2(x0−x)=22×10−3 t2\left(\sqrt{x_0} - \sqrt{x}\right) = 2\sqrt{2}\times10^{-3}\,t, with x0=2x_0 = 2 m. At t=500t = 500 s: x=2−22=12\sqrt{x} = \sqrt{2} - \dfrac{\sqrt{2}}{2} = \dfrac{1}{\sqrt{2}}, so x=0.5x = 0.5 m.
  5. h1=2+0.52=1.25h_1 = \dfrac{2 + 0.5}{2} = 1.25 m (and h2=0.75h_2 = 0.75 m).
AnswerAnswer: 1.25
Ask about this question
Q16

Physics, Question 16 (2 marks)

Capacitors with dielectrics · +2
Paragraph: A container of height 2 m, length 2 m and breadth 1 m is made of insulating vertical walls and two large area horizontal metal plates (M1\mathrm{M_1} and M2\mathrm{M_2}) which extend far beyond the vertical walls in all directions. The container is partitioned into two equal chambers with a thin insulating vertical wall. The partition wall contains a small hole of cross-sectional area 10 cm2\sqrt{10}\ \mathrm{cm^2} near its bottom edge. Initially the hole is closed and the left chamber of the container is completely filled with a liquid of dielectric constant ϵr=15\epsilon_r = 15 and the right chamber is empty (ϵr=1\epsilon_r = 1). At time t=0t = 0, the hole is opened and the liquid flows from the left chamber to the right chamber. In both the chambers, the space above the liquid has ϵr=1\epsilon_r = 1 and is maintained at atmospheric pressure. The schematic of the container at a time t>0t > 0 is shown in the figure. [Given: acceleration due to gravity is 10 m s−210\ \mathrm{m\,s^{-2}}.] (The figure shows plate M1\mathrm{M_1} on top and M2\mathrm{M_2} at the bottom, 2 m apart, both extending beyond the container; each chamber is 1 m wide in the figure; the left chamber holds liquid with ϵr=15\epsilon_r = 15 to some height below the top, the right chamber a shallower layer of the same liquid, with the hole at the foot of the partition.) Question: The difference in the capacitance (in F) between the metal plates at t=0t = 0 and that at t=500t = 500 s is (8−n)ϵ0(8 - n)\epsilon_0, where ϵ0\epsilon_0 is the permittivity of free space. The value of nn is:

Tests: Find the capacitance of plates with dielectric columns as series layers inside parallel columns.

Show solution
  1. The plates are 2 m apart. Outside the container the gap is air at all times, so that part of the capacitance does not change and cancels in the difference. Each chamber is a column of area A=1 m2A = 1\ \mathrm{m^2}: a liquid layer of height hh in series with an air layer of 2−h2 - h.

    Why: Parallel columns add; layers within a column are in series.

  2. One column: C=ϵ0A(2−h)+h/15C = \dfrac{\epsilon_0 A}{(2 - h) + h/15}.
  3. t=0t = 0: left h=2h = 2: C=ϵ02/15=7.5 ϵ0C = \dfrac{\epsilon_0}{2/15} = 7.5\,\epsilon_0; right h=0h = 0: C=0.5 ϵ0C = 0.5\,\epsilon_0. Total 8 ϵ08\,\epsilon_0.
  4. t=500t = 500 s (from Q15, h1=1.25h_1 = 1.25, h2=0.75h_2 = 0.75): left ϵ00.75+0.0833=1.2 ϵ0\dfrac{\epsilon_0}{0.75 + 0.0833} = 1.2\,\epsilon_0; right ϵ01.25+0.05=ϵ01.3≈0.769 ϵ0\dfrac{\epsilon_0}{1.25 + 0.05} = \dfrac{\epsilon_0}{1.3} \approx 0.769\,\epsilon_0. Total ≈1.969 ϵ0\approx 1.969\,\epsilon_0.
  5. Difference =(8−1.969) ϵ0= (8 - 1.969)\,\epsilon_0, so n≈1.97n \approx 1.97.
AnswerAnswer: 1.97
Ask about this question
Q17

Physics, Question 17 (2 marks)

Rotational dynamics (collision with a pivoted body) · +2
Paragraph: A uniform circular disk of radius 0.2 m and mass 1 kg is pivoted at its top point CC such that it can rotate freely around CC in the XYXY plane, as shown in the figure. Initially, when the disk is at rest, a particle of mass 20 g, travelling along negative xx direction in the XYXY plane with speed 100 m s−1100\ \mathrm{m\,s^{-1}}, hits the circumference of the disk at a point PP. After collision the particle moves along negative yy direction at a speed of 90 m s−190\ \mathrm{m\,s^{-1}}. [Given: the acceleration due to gravity (g)=−10 j^ m s−2(g) = -10\,\hat{j}\ \mathrm{m\,s^{-2}}] (The figure shows the disk hanging from CC with its centre OO directly below CC; the radius OPOP makes 45∘45^\circ with the downward vertical through OO, on the +x+x side, so PP is on the lower right of the rim; the particle mm comes in from the right along −x-x and leaves PP moving straight down.) Question: After the collision the disk starts to rotate around point CC in the XYXY plane. The maximum change in the height (in m) of its center OO is:

Tests: Conserve angular momentum about the pivot in a collision, then use energy to find how high the centre rises.

Show solution
  1. During the brief collision the pivot force acts through CC, so angular momentum about CC is conserved (gravity's impulse is negligible).
  2. Take CC as origin: O=(0,−0.2)O = (0, -0.2), P=(0.2sin⁡45∘,−0.2−0.2cos⁡45∘)=(0.1414,−0.3414)P = (0.2\sin45^\circ, -0.2 - 0.2\cos45^\circ) = (0.1414, -0.3414) m.
  3. Particle's angular momentum Lz=m(xvy−yvx)L_z = m(xv_y - yv_x). Before: 0.02×[0−(−0.3414)(−100)]=−0.68280.02 \times [0 - (-0.3414)(-100)] = -0.6828. After (vy=−90v_y = -90): 0.02×[0.1414×(−90)]=−0.2546 kg m2 s−10.02 \times [0.1414 \times (-90)] = -0.2546\ \mathrm{kg\,m^2\,s^{-1}}.
  4. The disk takes the rest: Ldisk=−0.6828+0.2546=−0.4283 kg m2 s−1L_{\text{disk}} = -0.6828 + 0.2546 = -0.4283\ \mathrm{kg\,m^2\,s^{-1}} (clockwise). IC=12MR2+MR2=1.5×1×0.04=0.06 kg m2I_C = \dfrac{1}{2}MR^2 + MR^2 = 1.5 \times 1 \times 0.04 = 0.06\ \mathrm{kg\,m^2}, so ω=0.42830.06≈7.14\omega = \dfrac{0.4283}{0.06} \approx 7.14 rad/s.

    Why: Parallel-axis theorem: the pivot is a distance R from the centre.

  5. Rotational KE =12ICω2=0.428322×0.06≈1.529= \dfrac{1}{2}I_C\omega^2 = \dfrac{0.4283^2}{2 \times 0.06} \approx 1.529 J. All of it becomes potential energy at the highest swing: Mg Δh=1.529⇒Δh≈0.153Mg\,\Delta h = 1.529 \Rightarrow \Delta h \approx 0.153 m (less than 2R=0.42R = 0.4 m, so the disk swings back).
AnswerAnswer: 0.15
Ask about this question
Q18

Physics, Question 18 (2 marks)

Rotational dynamics (energy in collisions) · +2
Paragraph: A uniform circular disk of radius 0.2 m and mass 1 kg is pivoted at its top point CC such that it can rotate freely around CC in the XYXY plane, as shown in the figure. Initially, when the disk is at rest, a particle of mass 20 g, travelling along negative xx direction in the XYXY plane with speed 100 m s−1100\ \mathrm{m\,s^{-1}}, hits the circumference of the disk at a point PP. After collision the particle moves along negative yy direction at a speed of 90 m s−190\ \mathrm{m\,s^{-1}}. [Given: the acceleration due to gravity (g)=−10 j^ m s−2(g) = -10\,\hat{j}\ \mathrm{m\,s^{-2}}] (The figure shows the disk hanging from CC with its centre OO directly below CC; the radius OPOP makes 45∘45^\circ with the downward vertical through OO, on the +x+x side, so PP is on the lower right of the rim; the particle mm comes in from the right along −x-x and leaves PP moving straight down.) Question: Amount of energy loss (in J) in the collision is:

Tests: Compare kinetic energy before and after a collision with a pivoted rigid body.

Show solution
  1. Kinetic energy before: only the particle, 12(0.02)(100)2=100\dfrac{1}{2}(0.02)(100)^2 = 100 J.
  2. After: particle 12(0.02)(90)2=81\dfrac{1}{2}(0.02)(90)^2 = 81 J; disk 12ICω2≈1.53\dfrac{1}{2}I_C\omega^2 \approx 1.53 J (from Q17: Ldisk=0.4283 kg m2 s−1L_{\text{disk}} = 0.4283\ \mathrm{kg\,m^2\,s^{-1}}, IC=0.06 kg m2I_C = 0.06\ \mathrm{kg\,m^2}).
  3. Energy lost =100−81−1.53≈17.47= 100 - 81 - 1.53 \approx 17.47 J.

    Why: The collision is inelastic: this energy goes into heat, sound and deformation.

AnswerAnswer: 17.47
Ask about this question

Chemistry, Section 1: 4 questions, only one option correct: +3 if only the correct option is chosen, 0 if unanswered, −1 in all other cases

Q1

Chemistry, Question 1 (3 marks)

Electrochemistry (Kohlrausch's law) · +3 / −1
At 300 K, the molar conductivities of the aqueous solutions of three salts at two different concentrations are given in the table. The conductivity of a saturated aqueous solution of AgCl is 1.40×10−6 S cm−11.40 \times 10^{-6}\ \mathrm{S\,cm^{-1}} at 300 K. If the solubility of AgCl in water at 300 K is X mol L−1X\ \mathrm{mol\,L^{-1}}, then log⁡10(X−1)\log_{10}(X^{-1}) is (Assume that AgCl dissolved in water ionizes completely and that the molar conductivity of saturated AgCl solution is equal to its limiting molar conductivity.)
SaltConcentration (M)Molar conductivity (S cm2 mol−1\mathrm{S\,cm^2\,mol^{-1}})
NaNO3\mathrm{NaNO_3}0.01111
NaNO3\mathrm{NaNO_3}0.04101
NaCl0.01117
NaCl0.04107
AgNO3\mathrm{AgNO_3}0.01125
AgNO3\mathrm{AgNO_3}0.04116
  1. (A)3
  2. (B)4
  3. (C)5
  4. (D)6

Tests: Extrapolate limiting molar conductivities and use Kohlrausch's law to get a solubility.

Show solution
  1. Strong electrolytes follow Λm=Λm∘−Ac\Lambda_m = \Lambda_m^\circ - A\sqrt{c}. Here 0.01=0.1\sqrt{0.01} = 0.1 and 0.04=0.2\sqrt{0.04} = 0.2, so Λm∘=2Λm(0.01)−Λm(0.04)\Lambda_m^\circ = 2\Lambda_m(0.01) - \Lambda_m(0.04).

    Why: Linear in √c: the step from √c = 0.2 to 0.1 equals the step from 0.1 to 0.

  2. Λ∘(NaNO3)=222−101=121\Lambda^\circ(\mathrm{NaNO_3}) = 222 - 101 = 121; Λ∘(NaCl)=234−107=127\Lambda^\circ(\mathrm{NaCl}) = 234 - 107 = 127; Λ∘(AgNO3)=250−116=134 S cm2 mol−1\Lambda^\circ(\mathrm{AgNO_3}) = 250 - 116 = 134\ \mathrm{S\,cm^2\,mol^{-1}}.
  3. Kohlrausch: Λ∘(AgCl)=Λ∘(AgNO3)+Λ∘(NaCl)−Λ∘(NaNO3)=134+127−121=140 S cm2 mol−1\Lambda^\circ(\mathrm{AgCl}) = \Lambda^\circ(\mathrm{AgNO_3}) + \Lambda^\circ(\mathrm{NaCl}) - \Lambda^\circ(\mathrm{NaNO_3}) = 134 + 127 - 121 = 140\ \mathrm{S\,cm^2\,mol^{-1}}.
  4. Solubility: X=κ×1000Λ∘=1.40×10−6×1000140=1.0×10−5 mol L−1X = \dfrac{\kappa \times 1000}{\Lambda^\circ} = \dfrac{1.40 \times 10^{-6} \times 1000}{140} = 1.0 \times 10^{-5}\ \mathrm{mol\,L^{-1}}.

    Why: The factor 1000 converts mol cm^-3 to mol L^-1.

  5. log⁡10(X−1)=log⁡10(105)=5\log_{10}(X^{-1}) = \log_{10}(10^5) = 5.
AnswerAnswer: (C) 5
Ask about this question
Q2

Chemistry, Question 2 (3 marks)

Chemical bonding (VSEPR, bond angles) · +3 / −1
The correct order of ONO bond angle in the given species is
  1. (A)NO2+<NO2<NO3−<NO2−\mathrm{NO_2^+ < NO_2 < NO_3^- < NO_2^-}
  2. (B)NO2−<NO3−<NO2<NO2+\mathrm{NO_2^- < NO_3^- < NO_2 < NO_2^+}
  3. (C)NO3−<NO2−<NO2<NO2+\mathrm{NO_3^- < NO_2^- < NO_2 < NO_2^+}
  4. (D)NO2−<NO3−<NO2+<NO2\mathrm{NO_2^- < NO_3^- < NO_2^+ < NO_2}

Tests: Rank bond angles using lone pairs and odd electrons on the central atom.

Show solution
  1. NO2+\mathrm{NO_2^+}: N has two σ\sigma bonds and no lone pair, sp, linear: 180∘180^\circ.
  2. NO3−\mathrm{NO_3^-}: three σ\sigma bonds, no lone pair, sp2^2, trigonal planar: 120∘120^\circ.
  3. NO2\mathrm{NO_2}: sp2^2 with a single unpaired electron on N; one electron repels less than a bond pair, so the angle opens to about 134∘134^\circ.
  4. NO2−\mathrm{NO_2^-}: sp2^2 with a full lone pair on N, which squeezes the angle to about 115∘115^\circ.

    Why: A lone pair repels more than bond pairs; a single electron repels less.

  5. Order: NO2− (115∘)<NO3− (120∘)<NO2 (134∘)<NO2+ (180∘)\mathrm{NO_2^-}\ (115^\circ) < \mathrm{NO_3^-}\ (120^\circ) < \mathrm{NO_2}\ (134^\circ) < \mathrm{NO_2^+}\ (180^\circ).
AnswerAnswer: (B) NO2−<NO3−<NO2<NO2+\mathrm{NO_2^- < NO_3^- < NO_2 < NO_2^+}
Ask about this question
Q3

Chemistry, Question 3 (3 marks)

Polymers and aldol condensation · +3 / −1
Natural rubber on complete ozonolysis (O3/Zn-H2O\mathrm{O_3/Zn\text{-}H_2O}) gives compound X as the major product. X gives positive iodoform and Tollen's tests. X on heating with aqueous NaOH gives Y as the major product. Y is (The options are drawn as structures, named here.)
  1. (A)cyclopent-2-en-1-one (a five-membered ring ketone with a C=C conjugated to the C=O, no other substituent)
  2. (B)1-(2-hydroxycyclopropyl)ethan-1-one (a cyclopropane ring carrying OH on one carbon and an acetyl group on the next)
  3. (C)1,1'-(cyclohexa-1,4-diene-1,4-diyl)diethan-1-one (a cyclohexa-1,4-diene ring with an acetyl group on C1 and on C4)
  4. (D)a bicyclic hemiacetal: a cycloheptenone ring fused to a five-membered cyclic hemiacetal (ring O and C-OH), with a methyl group on the ring-fusion carbon that carries the ring O

Tests: Get the ozonolysis product of natural rubber and predict its intramolecular aldol product.

Show solution
  1. Natural rubber is cis-1,4-polyisoprene, −[CH2−C(CH3)=CH−CH2]n−\mathrm{-[CH_2-C(CH_3)=CH-CH_2]_n-}. Ozonolysis cuts every C=C.
  2. Each repeat unit gives CH3COCH2CH2CHO\mathrm{CH_3COCH_2CH_2CHO} (4-oxopentanal, levulinaldehyde) = X: the methyl ketone gives iodoform, the aldehyde gives Tollens' silver mirror.
  3. Aqueous NaOH, heat: intramolecular aldol. The enolate of the terminal CH3\mathrm{CH_3} (C1) attacks the CHO carbon (C5), closing a five-membered ring C1–C2–C3–C4–C5.

    Why: Five-membered rings form fastest; the other enolates would close strained three-membered rings (option B).

  4. The aldol (3-hydroxycyclopentanone) dehydrates on heating to the conjugated enone, cyclopent-2-en-1-one = Y.
  5. (C) and (D) need two or three molecules of X, and (B) is the strained three-membered ring aldol; none is the major product.
AnswerAnswer: (A) cyclopent-2-en-1-one
Ask about this question
Q4

Chemistry, Question 4 (3 marks)

Carbohydrates (sucralose) · +3 / −1
A known artificial sweetener X is composed of 4-chloro-4-deoxy-α\alpha-D-galactose and 1,6-dichloro-1,6-dideoxy-β\beta-D-fructose joined by a glycosidic linkage. Structure of D-galactose is given below. (Fischer projection of D-galactose, top to bottom: CHO; C2 H on left, OH on right; C3 HO on left, H on right; C4 HO on left, H on right; C5 H on left, OH on right; CH2OH\mathrm{CH_2OH}.) The correct structure of X is (Each option is drawn as a pyranose ring joined through an O bridge to a furanose ring; they are described here.)
  1. (A)Pyranose: C4 carries Cl on the upper face (same side as the CH2OH\mathrm{CH_2OH} at C5) and H below; C1 bonds down (α) to the bridging O. Furanose: the bridging O comes up to C2 from below, C2 carries CH2Cl\mathrm{CH_2Cl} on the upper face; C5 carries H up and CH2Cl\mathrm{CH_2Cl} down
  2. (B)As (A) but at C4 of the pyranose the Cl is on the lower face and the H on the upper face; furanose part as in (A)
  3. (C)Pyranose C4 with Cl on the lower face and H on the upper face; furanose C2 has the bridging O on the upper face and CH2Cl\mathrm{CH_2Cl} on the lower face
  4. (D)Pyranose C4 with Cl on the upper face (as in A); furanose C2 has the bridging O on the upper face and CH2Cl\mathrm{CH_2Cl} on the lower face

Tests: Translate sugar names (galacto vs gluco, α vs β) into Haworth structures.

Show solution
  1. X is sucralose: 4-chloro-4-deoxy-α\alpha-D-galactopyranosyl-(1→2)-1,6-dichloro-1,6-dideoxy-β\beta-D-fructofuranoside. Check the two sugars one at a time.
  2. Galactose half: in the Fischer projection the C4 OH of D-galactose is on the left, which in the Haworth ring puts it on the upper face (same side as C6). Glucose has it on the lower face. So the Cl must be up at C4: options (A) and (D). (B) and (C) have Cl down, the gluco configuration.

    Why: Left in Fischer = up in Haworth.

  3. The α\alpha link at galactose C1 has the anomeric O on the lower face, opposite C6; all four options draw this.
  4. Fructose half: the furanose is drawn flipped (as in sucrose), so up and down are swapped. In β\beta-D-fructofuranoside drawn this way, C1 (CH2Cl\mathrm{CH_2Cl} here) is up at C2 and the glycosidic O comes from below, trans to C6 (CH2Cl\mathrm{CH_2Cl} down at C5). That is (A) and (B); (C) and (D) swap them, the α\alpha-fructoside.
  5. Only (A) has both the galacto C4–Cl and the β\beta-fructofuranoside link.
AnswerAnswer: (A) sucralose, with C4–Cl up (galacto) and a β\beta-fructofuranoside link
Ask about this question

Chemistry, Section 2: 5 questions, one or more options correct: +4 if all correct options are chosen; partial +3 if all four are correct and only three are chosen, +2 if three or more are correct and only two (both correct) are chosen, +1 if two or more are correct and only one (correct) is chosen; 0 if unanswered; −1 in all other cases

Q5

Chemistry, Question 5 (4 marks)

Chemical kinetics (first-order reactions) · +4 / −1
For a first-order reaction R→P\mathbf{R} \rightarrow \mathbf{P} at a given temperature, kk is the rate constant. For this reaction, at the given temperature, the concentrations of R and P at a time tt are [R] and [P], respectively. The correct graphical representation(s) for this reaction is(are) (The options are graphs, described here.)
  1. (A)[P] against tt: a curve starting at the origin and rising ever more steeply (concave upward)
  2. (B)d[R]dt\dfrac{d[\mathrm{R}]}{dt} against [R]: a straight line through the origin with positive slope
  3. (C)d[P]dt\dfrac{d[\mathrm{P}]}{dt} against tt: a curve starting high and decaying towards zero (exponential decay)
  4. (D)kk against tt: a horizontal straight line

Tests: Read concentration, rate and rate-constant graphs for a first-order reaction.

Show solution
  1. First order: [R]=[R]0e−kt[\mathrm{R}] = [\mathrm{R}]_0 e^{-kt} and [P]=[R]0(1−e−kt)[\mathrm{P}] = [\mathrm{R}]_0(1 - e^{-kt}).
  2. (A) [P][\mathrm{P}] rises steeply at first and levels off at [R]0[\mathrm{R}]_0 (concave down). A curve that keeps getting steeper is wrong. False.
  3. (B) d[R]dt=−k[R]\dfrac{d[\mathrm{R}]}{dt} = -k[\mathrm{R}]: a line through the origin with negative slope −k-k. The positive slope drawn fits −d[R]dt-\dfrac{d[\mathrm{R}]}{dt}, not d[R]dt\dfrac{d[\mathrm{R}]}{dt}. False.

    Why: R is being used up, so d[R]/dt is negative.

  4. (C) d[P]dt=k[R]=k[R]0e−kt\dfrac{d[\mathrm{P}]}{dt} = k[\mathrm{R}] = k[\mathrm{R}]_0 e^{-kt}: starts at k[R]0k[\mathrm{R}]_0 and decays exponentially. True.
  5. (D) kk depends on temperature only, not on time: a horizontal line. True.
AnswerAnswer: (C), (D)
Ask about this question
Q6

Chemistry, Question 6 (4 marks)

p-Block elements (xenon fluorides) · +4 / −1
Correct statement(s) about the compounds P, Q and R is(are): Xe(g)+F2(g)\mathrm{Xe(g) + F_2(g)} (1 : 5 ratio) →873 K, 7 bar\xrightarrow{873\ \text{K},\ 7\ \text{bar}} P; P + O2F2→143 K\mathrm{O_2F_2} \xrightarrow{143\ \text{K}} Q + O2\mathrm{O_2}; Q + H2O→complete hydrolysis\mathrm{H_2O} \xrightarrow{\text{complete hydrolysis}} R + HF.
  1. (A)P has two lone pairs of electrons on the central atom.
  2. (B)Q has a perfect octahedral geometry.
  3. (C)Q can act as a fluorinating agent.
  4. (D)The molecular structure of R is trigonal pyramidal.

Tests: Identify xenon fluorides from their preparation and predict their shapes and reactions.

Show solution
  1. Xe : F2\mathrm{F_2} = 1 : 5 at 873 K, 7 bar gives XeF4\mathrm{XeF_4} = P. XeF4+O2F2→143 KXeF6+O2\mathrm{XeF_4 + O_2F_2 \xrightarrow{143\ K} XeF_6 + O_2}, so Q = XeF6\mathrm{XeF_6}. XeF6+3H2O→XeO3+6HF\mathrm{XeF_6 + 3H_2O \rightarrow XeO_3 + 6HF}, so R = XeO3\mathrm{XeO_3}.
  2. (A) XeF4\mathrm{XeF_4}: 8 valence electrons on Xe, 4 used in bonds, so 2 lone pairs (square planar). True.
  3. (B) XeF6\mathrm{XeF_6} has 6 bond pairs and 1 lone pair (7 electron pairs): a distorted octahedron. False.
  4. (C) XeF6\mathrm{XeF_6} is a strong fluorinating agent (e.g. it converts SiO2\mathrm{SiO_2} to SiF4\mathrm{SiF_4} and forms XeOF4\mathrm{XeOF_4}). True.
  5. (D) XeO3\mathrm{XeO_3}: 3 bond pairs and 1 lone pair on Xe (sp3^3), trigonal pyramidal. True.
AnswerAnswer: (A), (C), (D)
Ask about this question
Q7

Chemistry, Question 7 (4 marks)

Periodic properties · +4 / −1
The correct statement(s) regarding the periodic properties of elements is(are)
  1. (A)Second ionization enthalpy of carbon atom is less than that of boron atom.
  2. (B)Increasing order of ionic radii: Al3+<Mg2+<Na+\mathrm{Al^{3+} < Mg^{2+} < Na^+}
  3. (C)Under identical conditions, in solid state, the density of potassium metal is more than density of sodium metal.
  4. (D)The H–H bond is weaker than F–F bond.

Tests: Apply ionization enthalpy, ionic radius, density and bond strength trends, including the exceptions.

Show solution
  1. (A) Second IE removes an electron from the cation. C+\mathrm{C^+} is 1s22s22p11s^2 2s^2 2p^1: a 2p electron goes. B+\mathrm{B^+} is 1s22s21s^2 2s^2: a stable, penetrating 2s electron must go. So ΔiH2(C)≈2353<ΔiH2(B)≈2427 kJ mol−1\Delta_i H_2(\mathrm{C}) \approx 2353 < \Delta_i H_2(\mathrm{B}) \approx 2427\ \mathrm{kJ\,mol^{-1}}. True.

    Why: Same pattern as IE1(Be) > IE1(B), shifted one element along.

  2. (B) Isoelectronic ions (10 electrons): more nuclear charge, smaller ion. Al3+\mathrm{Al^{3+}} (Z = 13) < Mg2+\mathrm{Mg^{2+}} (12) < Na+\mathrm{Na^+} (11). True.
  3. (C) Density of K (0.86 g cm−3^{-3}) is less than Na (0.97 g cm−3^{-3}): the anomaly in group 1, because K's atomic volume grows more than its mass. False.
  4. (D) H–H bond enthalpy is 436 kJ mol−1^{-1}, F–F only about 158 kJ mol−1^{-1} (lone-pair repulsion in small F). H–H is stronger. False.
AnswerAnswer: (A), (B)
Ask about this question
Q8

Chemistry, Question 8 (4 marks)

Amines and diazonium salts; phenols · +4 / −1
In the following reaction sequence, P, Q, S and T are the major products. (Aniline with 1. (CH3CO)2O\mathrm{(CH_3CO)_2O}, pyridine; 2. conc. HNO3\mathrm{HNO_3}, conc. H2SO4\mathrm{H_2SO_4}, 288 K gives P; P with 1. H3O+\mathrm{H_3O^+}; 2. NaNO2/HCl\mathrm{NaNO_2/HCl}, 273–278 K gives Q. Cumene (isopropylbenzene) with 1. O2/H3O+\mathrm{O_2/H_3O^+}; 2. NaOH/CO2\mathrm{NaOH/CO_2}; 3. H3O+\mathrm{H_3O^+} gives S; S with Q in aqueous NaOH gives T.) The correct statement(s) about P, Q, S and T is(are)
  1. (A)Q on treatment with ethanol generates an aromatic aldehyde.
  2. (B)S gives positive phthalein dye test.
  3. (C)P is a dinitro compound.
  4. (D)T is a coloured compound.

Tests: Track aniline and cumene through protection, nitration, diazotisation, Kolbe and azo coupling.

Show solution
  1. Acetylation protects NH2\mathrm{NH_2} as NHCOCH3\mathrm{NHCOCH_3} (moderate o/p director); nitration at 288 K gives mainly p-nitroacetanilide = P. Hydrolysis gives p-nitroaniline; diazotisation gives p-nitrobenzenediazonium chloride = Q.
  2. Cumene → cumene hydroperoxide → phenol + acetone (H3O+\mathrm{H_3O^+}); Kolbe reaction (NaOH/CO2\mathrm{NaOH/CO_2}, then acid) gives salicylic acid (2-hydroxybenzoic acid) = S.
  3. T: Q couples with the phenoxide of S in aqueous NaOH, para to the OH: 5-(4-nitrophenylazo)salicylic acid (alizarin yellow R), an azo dye.
  4. (A) Ethanol reduces ArN2+Cl−\mathrm{ArN_2^+Cl^-} to ArH\mathrm{ArH} (nitrobenzene); ethanol itself is oxidised to acetaldehyde, which is aliphatic. No aromatic aldehyde. False.
  5. (B) S has a free phenolic OH with the para position open; heated with phthalic anhydride and conc. H2SO4\mathrm{H_2SO_4}, then alkali, it gives a coloured phthalein. True (as the key takes it).
  6. (C) Acetanilide nitration at 288 K introduces one NO2\mathrm{NO_2} only (p-nitroacetanilide). False.
  7. (D) T is an azo compound with an extended conjugated Ar−N=N−Ar\mathrm{Ar-N=N-Ar} system: coloured (yellow-orange). True.
AnswerAnswer: (B), (D)
Ask about this question
Q9

Chemistry, Question 9 (4 marks)

Biomolecules (carbohydrates) · +4 / −1
The correct statement(s) regarding sugars is(are) Given: Specific rotations of L-(−)-glucose and L-(+)-fructose are −52.5∘-52.5^\circ and +92.5∘+92.5^\circ, respectively.
  1. (A)On treatment with HNO3\mathrm{HNO_3}, gluconic acid is oxidized to saccharic acid, whereas glucose is not oxidized to saccharic acid.
  2. (B)Fructose gives a positive Fehling's test because it isomerises to glucose and another aldohexose in the presence of Fehling's reagent.
  3. (C)Invert sugar is an equimolar mixture of D-glucose and D-fructose formed after hydrolysis of the corresponding disaccharide.
  4. (D)Specific rotation of invert sugar is −40∘-40^\circ.

Tests: Recall glucose oxidation, fructose's Fehling's test and the rotation of invert sugar.

Show solution
  1. (A) Nitric acid oxidises both the CHO and the terminal CH2OH\mathrm{CH_2OH} of glucose, giving saccharic (glucaric) acid directly; gluconic acid also gives it. The claim that glucose is not oxidised to saccharic acid is wrong. False.
  2. (B) In alkaline Fehling's solution fructose enolises (Lobry de Bruyn–van Ekenstein rearrangement) to an enediol that gives glucose and mannose, both aldohexoses, which reduce Cu2+\mathrm{Cu^{2+}}. True.
  3. (C) Hydrolysis of sucrose gives equal moles of D-(+)-glucose and D-(−)-fructose: invert sugar. True.
  4. (D) Enantiomers have equal and opposite rotations: D-glucose +52.5∘+52.5^\circ, D-fructose −92.5∘-92.5^\circ. Equimolar mixture: 52.5−92.52=−20∘\dfrac{52.5 - 92.5}{2} = -20^\circ, not −40∘-40^\circ. False.

    Why: The given values are for the L sugars; flip the signs for D.

AnswerAnswer: (B), (C)
Ask about this question

Chemistry, Section 3: 5 questions, numerical value (truncate/round off to two decimal places): +4 if correct, 0 in all other cases

Q10

Chemistry, Question 10 (4 marks)

Atomic structure (hydrogen-like spectra) · +4
Xa+\mathrm{X}^{a+} and Yb+\mathrm{Y}^{b+} are hydrogen-like species. The wavelength of light absorbed during the transition between the states with principal quantum numbers n=1n = 1 and n=2n = 2 of Xa+\mathrm{X}^{a+} is λ\lambda. The wavelength of light absorbed during the transition between the states with principal quantum numbers n=2n = 2 and n=4n = 4 of Yb+\mathrm{Y}^{b+} is 9λ9\lambda. The lowest possible value of (a+b)(a + b) is ______.

Tests: Use the Z² dependence of hydrogen-like spectra to identify the ions.

Show solution
  1. For a hydrogen-like ion: 1λ=RHZ2(1n12−1n22)\dfrac{1}{\lambda} = R_H Z^2\left(\dfrac{1}{n_1^2} - \dfrac{1}{n_2^2}\right).
  2. X, 1 → 2: 1λ=RHZX2⋅34\dfrac{1}{\lambda} = R_H Z_X^2 \cdot \dfrac{3}{4}. Y, 2 → 4: 19λ=RHZY2⋅316\dfrac{1}{9\lambda} = R_H Z_Y^2 \cdot \dfrac{3}{16}.
  3. Divide: 9=ZX2⋅3/4ZY2⋅3/16=4ZX2ZY29 = \dfrac{Z_X^2 \cdot 3/4}{Z_Y^2 \cdot 3/16} = \dfrac{4Z_X^2}{Z_Y^2}, so ZXZY=32\dfrac{Z_X}{Z_Y} = \dfrac{3}{2}.
  4. Smallest integers: ZX=3Z_X = 3 (Li2+\mathrm{Li^{2+}}, a=2a = 2) and ZY=2Z_Y = 2 (He+\mathrm{He^+}, b=1b = 1).

    Why: A hydrogen-like ion of atomic number Z has charge Z − 1.

  5. a+b=2+1=3a + b = 2 + 1 = 3.
AnswerAnswer: 3
Ask about this question
Q11

Chemistry, Question 11 (4 marks)

Surface chemistry (Freundlich isotherm) · +4
At a given temperature, 0.45 g of acetic acid in 50 mL of water is shaken with 1.0 g of charcoal and the pH of the resulting solution is 3.0. Assume, the adsorption of acetic acid from the aqueous solution by charcoal follows Freundlich isotherm, xm=kC1/n\dfrac{x}{m} = kC^{1/n}. If the plot of log⁡10(x/m)\log_{10}(x/m) against log⁡10C\log_{10}C gives a straight line with slope 1, the value of kk in L mol−1\mathrm{L\,mol^{-1}} is ______. Given: The molar mass of acetic acid is 60 g mol−160\ \mathrm{g\,mol^{-1}}. The acid dissociation constant of acetic acid is 1.0×10−51.0 \times 10^{-5} at the given temperature. xx is the mass (in grams) of acetic acid adsorbed. mm is the mass (in grams) of charcoal. CC is the equilibrium concentration of acetic acid in the solution after the adsorption is complete. kk and nn are constants for acetic acid–charcoal system at the given temperature.

Tests: Use pH to find the equilibrium concentration and then the Freundlich constant.

Show solution
  1. Initially: 0.4560=7.5×10−3\dfrac{0.45}{60} = 7.5 \times 10^{-3} mol in 0.050 L, i.e. 0.15 M.
  2. After adsorption, pH 3: [H+]=10−3[\mathrm{H^+}] = 10^{-3}. For a weak acid [H+]2=KaC[\mathrm{H^+}]^2 = K_a C, so C=10−610−5=0.10 MC = \dfrac{10^{-6}}{10^{-5}} = 0.10\ \mathrm{M}.
  3. Adsorbed: (0.15−0.10)×0.050=2.5×10−3(0.15 - 0.10) \times 0.050 = 2.5 \times 10^{-3} mol =0.15= 0.15 g. So xm=0.151.0=0.15\dfrac{x}{m} = \dfrac{0.15}{1.0} = 0.15.
  4. Slope 1n=1\dfrac{1}{n} = 1, so xm=kC\dfrac{x}{m} = kC: k=0.150.10=1.50 L mol−1k = \dfrac{0.15}{0.10} = 1.50\ \mathrm{L\,mol^{-1}}.
  5. If C is taken as all acetic acid (un-ionised 0.100 M plus acetate 0.001 M = 0.101 M), x = 0.147 g and k=1.46k = 1.46; the key's range [1.45 to 1.50] accepts both.
AnswerAnswer: 1.50 L mol−1\mathrm{L\,mol^{-1}}
Ask about this question
Q12

Chemistry, Question 12 (4 marks)

Solutions (elevation of boiling point, van 't Hoff factor) · +4
In a solvent S, a compound B is partially dissociated into C and D as given below: B⇌2C+2D\mathbf{B} \rightleftharpoons 2\mathbf{C} + 2\mathbf{D}. B, C and D are non-volatile in nature. The molar mass of B is 10 times the molar mass of S. The standard boiling point and the standard enthalpy of vaporization of S are 400 K and 10R J mol−110R\ \mathrm{J\,mol^{-1}}, respectively (RR is the gas constant in J K−1 mol−1\mathrm{J\,K^{-1}\,mol^{-1}}). A solution of B in S with an initial concentration of B as 0.25% (mass/mass) has a boiling point of 408 K at 1 bar pressure. In this solution, the mole percent of B that has been dissociated is ______.

Tests: Get Kb from vaporisation data and the van 't Hoff factor from a boiling point elevation.

Show solution
  1. Kb=RTb2MSΔvapH=R×4002×MS10R=16000 MSK_b = \dfrac{RT_b^2 M_S}{\Delta_{vap}H} = \dfrac{R \times 400^2 \times M_S}{10R} = 16000\,M_S with MSM_S in kg mol−1^{-1}, i.e. Kb=16 MSK_b = 16\,M_S when MSM_S is in g mol−1^{-1} (K kg mol−1^{-1}).
  2. 0.25 % (m/m): 0.25 g B in 99.75 g S. Molality m=0.25/(10MS)0.09975=0.250.9975 MSm = \dfrac{0.25/(10M_S)}{0.09975} = \dfrac{0.25}{0.9975\,M_S}.
  3. ΔTb=iKbm\Delta T_b = iK_b m: 8=i×16MS×0.250.9975 MS=4i0.99758 = i \times 16M_S \times \dfrac{0.25}{0.9975\,M_S} = \dfrac{4i}{0.9975}, so i=1.995i = 1.995.

    Why: M_S cancels, which is why it is never given.

  4. One B gives 4 particles: i=1−α+4α=1+3αi = 1 - \alpha + 4\alpha = 1 + 3\alpha, so α=0.9953=0.3317\alpha = \dfrac{0.995}{3} = 0.3317, i.e. 33.17 %.
  5. With the usual approximation 0.25 g per 100 g of solvent, i=2i = 2 and α=33.33 %\alpha = 33.33\ \%; the key's range [33.00 to 33.33] accepts both.
AnswerAnswer: 33.17 (%)
Ask about this question
Q13

Chemistry, Question 13 (4 marks)

Coordination compounds (isomerism, geometry) · +4
Consider that the coordinating atoms of the ligands in cis-[Co(NH3)4Cl2]Cl\mathrm{[Co(NH_3)_4Cl_2]Cl} and mer-[Co(NH3)3Cl3]\mathrm{[Co(NH_3)_3Cl_3]} octahedral complexes are at the vertices of an octahedron. The sum of total number of the triangular faces in both the complexes having one N atom and two Cl atoms at their corners is ______.

Tests: Count faces of an octahedron by the ligands at their corners in cis and mer isomers.

Show solution
  1. An octahedron has vertices ±x,±y,±z\pm x, \pm y, \pm z and 8 faces; each face takes one vertex from each axis pair (no two trans vertices share a face).
  2. cis-[Co(NH3)4Cl2]+\mathrm{[Co(NH_3)_4Cl_2]^+}: Cl at +x+x and +y+y, N at the other four. A face with both Cl must use +x+x and +y+y, and its third corner is +z+z or −z-z, both N. So 2 faces.
  3. mer-[Co(NH3)3Cl3]\mathrm{[Co(NH_3)_3Cl_3]}: Cl at +x,−x,+y+x, -x, +y; N at −y,+z,−z-y, +z, -z. Two Cl and one N: the z corner is always N, so the x and y corners must both be Cl: x is ±x\pm x (2 ways), y is +y+y (1 way), z is ±z\pm z (2 ways). So 2×1×2=42 \times 1 \times 2 = 4 faces.
  4. Total =2+4=6= 2 + 4 = 6.
AnswerAnswer: 6
Ask about this question
Q14

Chemistry, Question 14 (4 marks)

Polymers (condensation copolymers) · +4
In the following reaction sequence, major products X and Y are acyclic monomers. (CH3I\mathrm{CH_3I} with 1. KCN; 2. H3O+\mathrm{H_3O^+}, Δ\Delta; 3. Red P, Br2\mathrm{Br_2}; 4. NH3\mathrm{NH_3} (excess) gives X. Caprolactam with H3O+\mathrm{H_3O^+}, Δ\Delta gives Y.) 500 mol of X completely reacts with 500 mol of Y to give 1 mol of a single biodegradable acyclic copolymer Z as the only product. The amount of Z formed in grams is ______. Given: Atomic mass (in amu): H : 1, C : 12, N : 14, O : 16, Br : 80

Tests: Identify the monomers of nylon-2-nylon-6 and find the mass of one chain from condensation.

Show solution
  1. CH3I→KCNCH3CN→H3O+,ΔCH3COOH→Red P/Br2BrCH2COOH→NH3 (excess)H2NCH2COOH\mathrm{CH_3I \xrightarrow{KCN} CH_3CN \xrightarrow{H_3O^+, \Delta} CH_3COOH \xrightarrow{Red\ P/Br_2} BrCH_2COOH \xrightarrow{NH_3\ (excess)} H_2NCH_2COOH}: X = glycine, M=75M = 75.

    Why: Step 3 is the Hell–Volhard–Zelinsky α-bromination.

  2. Caprolactam hydrolyses (ring opening) to H2N(CH2)5COOH\mathrm{H_2N(CH_2)_5COOH}: Y = 6-aminohexanoic acid, M=131M = 131.
  3. Z is the biodegradable polyamide nylon-2-nylon-6. 1000 monomer units in one acyclic chain are joined by 999 amide bonds, each releasing one H2O\mathrm{H_2O}.
  4. Mass of Z =500×75+500×131−999×18=37500+65500−17982=85018= 500 \times 75 + 500 \times 131 - 999 \times 18 = 37500 + 65500 - 17982 = 85018 g.
AnswerAnswer: 85018 g
Ask about this question

Chemistry, Section 4: 2 question stems with 2 questions each, numerical value (truncate/round off to two decimal places): +2 if correct, 0 in all other cases

Q15

Chemistry, Question 15 (2 marks)

Solutions (Raoult's law) and ideal gases · +2
Question stem for Q15 and Q16: Two volatile liquids A and B form an ideal solution. Consider a 5 molal solution of B in A inside a closed container having a total vapour pressure of 100 mm Hg at 300 K. The vapour pressure of pure A at 300 K is 105 mm Hg. Assume that A and B behave as ideal gases in the vapour phase. Given: the gas constant R=0.08 L atm K−1 mol−1R = 0.08\ \mathrm{L\,atm\,K^{-1}\,mol^{-1}}; molar mass of A is 50 g mol−150\ \mathrm{g\,mol^{-1}}; molar mass of B is 57 g mol−157\ \mathrm{g\,mol^{-1}}; density of liquid B at 300 K is 0.5 g/mL0.5\ \mathrm{g/mL}; 1 atm = 760 mm Hg. Question: At 300 K, the ratio of the molar volume of pure B in vapour phase to its molar volume in liquid phase is ______.

Tests: Get a pure-component vapour pressure from Raoult's law and compare vapour and liquid molar volumes.

Show solution
  1. 5 molal: 5 mol B in 1000 g A, i.e. 100050=20\dfrac{1000}{50} = 20 mol A. So xB=525=0.2x_B = \dfrac{5}{25} = 0.2, xA=0.8x_A = 0.8.
  2. Raoult: 100=0.8×105+0.2 pB∘=84+0.2 pB∘100 = 0.8 \times 105 + 0.2\,p_B^\circ = 84 + 0.2\,p_B^\circ, so pB∘=80p_B^\circ = 80 mm Hg.
  3. Pure B vapour at 300 K is at its vapour pressure, 80 mm Hg =80760= \dfrac{80}{760} atm: Vvap=RTp=0.08×300×76080=228 L mol−1V_{\text{vap}} = \dfrac{RT}{p} = \dfrac{0.08 \times 300 \times 760}{80} = 228\ \mathrm{L\,mol^{-1}}.

    Why: Vapour in equilibrium with pure liquid B is at p°B.

  4. Liquid: Vliq=570.5=114 mL mol−1=0.114 L mol−1V_{\text{liq}} = \dfrac{57}{0.5} = 114\ \mathrm{mL\,mol^{-1}} = 0.114\ \mathrm{L\,mol^{-1}}.
  5. Ratio =2280.114=2000= \dfrac{228}{0.114} = 2000.
AnswerAnswer: 2000
Ask about this question
Q16

Chemistry, Question 16 (2 marks)

Solutions (Raoult's law, vapour composition) · +2
Question stem for Q15 and Q16: Two volatile liquids A and B form an ideal solution. Consider a 5 molal solution of B in A inside a closed container having a total vapour pressure of 100 mm Hg at 300 K. The vapour pressure of pure A at 300 K is 105 mm Hg. Assume that A and B behave as ideal gases in the vapour phase. Given: the gas constant R=0.08 L atm K−1 mol−1R = 0.08\ \mathrm{L\,atm\,K^{-1}\,mol^{-1}}; molar mass of A is 50 g mol−150\ \mathrm{g\,mol^{-1}}; molar mass of B is 57 g mol−157\ \mathrm{g\,mol^{-1}}; density of liquid B at 300 K is 0.5 g/mL0.5\ \mathrm{g/mL}; 1 atm = 760 mm Hg. Question: The mole fraction of B in vapour phase which is in equilibrium with this solution is ______.

Tests: Find the vapour-phase mole fraction from Raoult's and Dalton's laws.

Show solution
  1. From the stem: xB=0.2x_B = 0.2 (5 mol B with 20 mol A) and pB∘=80p_B^\circ = 80 mm Hg (from 100=0.8×105+0.2 pB∘100 = 0.8 \times 105 + 0.2\,p_B^\circ).
  2. Partial pressure of B: pB=xBpB∘=0.2×80=16p_B = x_B p_B^\circ = 0.2 \times 80 = 16 mm Hg.
  3. Dalton: yB=pBP=16100=0.16y_B = \dfrac{p_B}{P} = \dfrac{16}{100} = 0.16.
AnswerAnswer: 0.16
Ask about this question
Q17

Chemistry, Question 17 (2 marks)

Organic synthesis and Kjeldahl's method · +2
Question stem for Q17 and Q18: Consider the following reaction sequence in which J, K, L and M are the major products. (The scheme shows: m-xylene (1,3-dimethylbenzene) treated with 1. chloroacetyl chloride (ClCOCH2Cl\mathrm{ClCOCH_2Cl}), anhyd. AlCl3\mathrm{AlCl_3}; 2. NaI, heat; 3. sodium 3-nitrophenoxide (NaO on the ring, NO2\mathrm{NO_2} meta to it) gives J. J with 1. NaBH4\mathrm{NaBH_4}; 2. PBr3\mathrm{PBr_3} gives K (molar mass: 350 g/mol). K with NH3\mathrm{NH_3} (excess) gives L (nitrogen containing compound); K with PhSNa gives M (sulphur containing compound).) Given: atomic mass (in amu): H : 1, C : 12, N : 14, O : 16, S : 32, Br : 80, Ba : 137. Question: The volume of 1 M aqueous H2SO4\mathrm{H_2SO_4} required to completely neutralize the ammonia evolved from 5.72 g of L in Kjeldahl's method of nitrogen estimation is ______ mL.

Tests: Work out a multi-step synthesis from a given molar mass and apply Kjeldahl's limits.

Show solution
  1. Friedel–Crafts acylation of m-xylene at C4 (ortho to one CH3\mathrm{CH_3}, para to the other) gives ArCOCH2Cl\mathrm{ArCOCH_2Cl}, Ar = 2,4-dimethylphenyl. NaI (Finkelstein) gives ArCOCH2I\mathrm{ArCOCH_2I}; 3-nitrophenoxide displaces I: J = ArCOCH2OC6H4NO2\mathrm{ArCOCH_2OC_6H_4NO_2} (C16H15NO4\mathrm{C_{16}H_{15}NO_4}, 285).
  2. NaBH4\mathrm{NaBH_4} reduces the ketone to ArCH(OH)CH2OAr′\mathrm{ArCH(OH)CH_2OAr'} (287); PBr3\mathrm{PBr_3} gives K = ArCHBrCH2OAr′\mathrm{ArCHBrCH_2OAr'}, 287−17+80=350287 - 17 + 80 = 350 g/mol, as given.

    Why: The given molar mass confirms the structure.

  3. Excess NH3\mathrm{NH_3} substitutes Br: L = ArCH(NH2)CH2OC6H4NO2\mathrm{ArCH(NH_2)CH_2OC_6H_4NO_2} (C16H18N2O3\mathrm{C_{16}H_{18}N_2O_3}), M=350−80+16=286M = 350 - 80 + 16 = 286. Moles of L =5.72286=0.020= \dfrac{5.72}{286} = 0.020.
  4. Kjeldahl's method converts amino N to (NH4)2SO4\mathrm{(NH_4)_2SO_4} but does not convert nitro N. So only 1 N per L counts: 0.020 mol NH3\mathrm{NH_3}.

    Why: Nitro, azo and ring N are not estimated by Kjeldahl's method.

  5. 2NH3+H2SO4→(NH4)2SO4\mathrm{2NH_3 + H_2SO_4 \rightarrow (NH_4)_2SO_4}: 0.010 mol H2SO4\mathrm{H_2SO_4} = 10 mL of 1 M.
AnswerAnswer: 10 mL
Ask about this question
Q18

Chemistry, Question 18 (2 marks)

Organic synthesis and Carius method · +2
Question stem for Q17 and Q18: Consider the following reaction sequence in which J, K, L and M are the major products. (The scheme shows: m-xylene (1,3-dimethylbenzene) treated with 1. chloroacetyl chloride (ClCOCH2Cl\mathrm{ClCOCH_2Cl}), anhyd. AlCl3\mathrm{AlCl_3}; 2. NaI, heat; 3. sodium 3-nitrophenoxide (NaO on the ring, NO2\mathrm{NO_2} meta to it) gives J. J with 1. NaBH4\mathrm{NaBH_4}; 2. PBr3\mathrm{PBr_3} gives K (molar mass: 350 g/mol). K with NH3\mathrm{NH_3} (excess) gives L (nitrogen containing compound); K with PhSNa gives M (sulphur containing compound).) Given: atomic mass (in amu): H : 1, C : 12, N : 14, O : 16, S : 32, Br : 80, Ba : 137. Question: In sulphur estimation by Carius method, the amount of BaSO4\mathrm{BaSO_4} formed from 3.79 g of M is ______ g.

Tests: Find the product's molar mass and apply sulphur estimation by the Carius method.

Show solution
  1. From the stem: K = ArCHBrCH2OC6H4NO2\mathrm{ArCHBrCH_2OC_6H_4NO_2} (Ar = 2,4-dimethylphenyl), M=350M = 350 (Friedel–Crafts with chloroacetyl chloride, Finkelstein, Williamson with 3-nitrophenoxide, NaBH4\mathrm{NaBH_4}, PBr3\mathrm{PBr_3}).
  2. PhSNa (thiophenoxide, a strong nucleophile) substitutes Br: M = ArCH(SPh)CH2OC6H4NO2\mathrm{ArCH(SPh)CH_2OC_6H_4NO_2}, M=350−80+109=379M = 350 - 80 + 109 = 379 g/mol (C6H5S=109\mathrm{C_6H_5S} = 109).
  3. Moles of M =3.79379=0.010= \dfrac{3.79}{379} = 0.010, each with one S.
  4. Carius: all S goes to BaSO4\mathrm{BaSO_4} (M=137+32+64=233M = 137 + 32 + 64 = 233). Mass =0.010×233=2.33= 0.010 \times 233 = 2.33 g.
AnswerAnswer: 2.33 g
Ask about this question

Questions are quoted from JEE (Advanced) 2026 Paper 2 (English); figures are described in words. Every final answer is checked against the official provisional answer key; the final key may still change an answer. Where the key accepts more than one answer, the solution says so.

JEE (Advanced) question papers and answer keys are referenced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to the Joint Admission Board and the IIT that conducted the exam. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with the JAB, the IITs or NTA.