AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

NCERT Solutions for Class 10 Science Chapter 9: Light – Reflection and Refraction

Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 9. Every numerical answer is recomputed with the mirror or lens formula and the sign convention, which is where most marks are lost.

These are complete NCERT question answers for Class 10 Science Chapter 9, Light – Reflection and Refraction: all the intext questions and end-of-chapter exercise questions. Each one is an ideal answer written the way the CBSE marking scheme gives step marks: the rule or formula, the working, and the final answer stated clearly.

Key ideas
  • Sign convention: measure from the pole or optical centre; the object is on the left, so u is negative. Concave mirror and concave lens: f negative. Convex: f positive.
  • Mirror: 1v+1u=1f\dfrac{1}{v} + \dfrac{1}{u} = \dfrac{1}{f}, m=−vum = -\dfrac{v}{u}, f=R2f = \dfrac{R}{2}.
  • Lens: 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f}, m=vum = \dfrac{v}{u}, power P=1fP = \dfrac{1}{f} (f in metres, P in dioptres).
  • Refractive index n=cvn = \dfrac{c}{v}: light slows and bends towards the normal entering a denser medium.
  • Negative m: real and inverted. Positive m: virtual and erect.

In-text questions: spherical mirrors (section 9.2)

Q1

Section 9.2 (a), Intext question 1

Define the principal focus of a concave mirror.

Tests: Defining the principal focus of a concave mirror.

Show solution
  1. Rays parallel to the principal axis, after reflection from a concave mirror, meet at a point on the principal axis. That point is the principal focus (F).
AnswerThe point on the principal axis where rays parallel to the axis meet after reflection.
Ask about this question
Q2

Section 9.2 (a), Intext question 2

The radius of curvature of a spherical mirror is 20 cm. What is its focal length?

Tests: Using f = R/2.

Show solution
  1. f=R2=202=10f = \dfrac{R}{2} = \dfrac{20}{2} = 10 cm
Answer10 cm
Ask about this question
Q3

Section 9.2 (a), Intext question 3

Name a mirror that can give an erect and enlarged image of an object.

Tests: Knowing which mirror gives an enlarged virtual image.

Show solution
  1. A concave mirror, with the object between the pole and the principal focus. The image is virtual, erect and enlarged.
AnswerA concave mirror (object between P and F).
Ask about this question
Q4

Section 9.2 (a), Intext question 4

Why do we prefer a convex mirror as a rear-view mirror in vehicles?

Tests: Explaining the use of convex mirrors.

Show solution
  1. A convex mirror always forms an erect, diminished image, and because it bulges outwards it gives a much wider field of view, so the driver sees more of the traffic behind.
AnswerIt always gives an erect image and a wider field of view.
Ask about this question

In-text questions: mirror formula and magnification (section 9.2)

Q1

Section 9.2 (b), Intext question 1

Find the focal length of a convex mirror whose radius of curvature is 32 cm.

Tests: Using f = R/2 with the sign convention.

Show solution
  1. f=R2=+322=+16f = \dfrac{R}{2} = \dfrac{+32}{2} = +16 cm (behind the mirror).
Answer+16 cm
Ask about this question
Q2

Section 9.2 (b), Intext question 2

A concave mirror produces three times magnified (enlarged) real image of an object placed at 10 cm in front of it. Where is the image located?

Tests: Using magnification with the sign convention.

Show solution
  1. Real image, so inverted: m=−3m = -3. u=−10u = -10 cm.
  2. m=−vum = -\dfrac{v}{u}, so v=−mu=−(−3)(−10)=−30v = -mu = -(-3)(-10) = -30 cm.
Answer30 cm in front of the mirror (v=−30v = -30 cm).
Ask about this question

In-text questions: refraction and refractive index (section 9.3)

Q1

Section 9.3 (a), Intext question 1

A ray of light travelling in air enters obliquely into water. Does the light ray bend towards the normal or away from the normal? Why?

Tests: Predicting the direction of bending from optical density.

Show solution
  1. Towards the normal. Water is optically denser than air, so light slows down on entering it and bends towards the normal.
AnswerTowards the normal, because light slows down in the denser water.
Ask about this question
Q2

Section 9.3 (a), Intext question 2

Light enters from air to glass having refractive index 1.50. What is the speed of light in the glass? The speed of light in vacuum is 3 × 10⁸ m s⁻¹.

Tests: Using n = c/v.

Show solution
  1. v=cn=3×1081.50=2×108 m s−1v = \dfrac{c}{n} = \dfrac{3 \times 10^{8}}{1.50} = 2 \times 10^{8}\ \text{m s}^{-1}
Answer2×1082 \times 10^{8} m/s
Ask about this question
Q3

Section 9.3 (a), Intext question 3

Find out, from Table 9.3, the medium having the highest optical density. Also find the medium with the lowest optical density.

Tests: Reading optical density from refractive index.

Show solution
  1. The higher the refractive index, the higher the optical density. Highest: diamond (2.42). Lowest: air (1.0003).
AnswerHighest: diamond. Lowest: air.
Ask about this question
Q4

Section 9.3 (a), Intext question 4

You are given kerosene, turpentine and water. In which of these does the light travel fastest? Use the information given in Table 9.3.

Tests: Linking refractive index to the speed of light.

Show solution
  1. Refractive indices: kerosene 1.44, turpentine oil 1.47, water 1.33. Speed =cn= \dfrac{c}{n} is greatest for the smallest n: water.
AnswerWater
Ask about this question
Q5

Section 9.3 (a), Intext question 5

The refractive index of diamond is 2.42. What is the meaning of this statement?

Tests: Interpreting a refractive index.

Show solution
  1. The speed of light in vacuum is 2.42 times its speed in diamond: n=cv=2.42n = \dfrac{c}{v} = 2.42, so v≈1.24×108v \approx 1.24 \times 10^{8} m/s.
AnswerLight travels 2.42 times slower in diamond than in vacuum.
Ask about this question

In-text questions: lenses and power (section 9.3)

Q1

Section 9.3 (b), Intext question 1

Define 1 dioptre of power of a lens.

Tests: Defining the dioptre.

Show solution
  1. P=1fP = \dfrac{1}{f} with f in metres. 1 dioptre is the power of a lens whose focal length is 1 m.
AnswerThe power of a lens of focal length 1 metre.
Ask about this question
Q2

Section 9.3 (b), Intext question 2

A convex lens forms a real and inverted image of a needle at a distance of 50 cm from it. Where is the needle placed in front of the convex lens if the image is equal to the size of the object? Also, find the power of the lens.

Tests: Using the 2F position and the lens formula.

Show solution
  1. Real, inverted and equal in size: m=−1m = -1, so u=−v=−50u = -v = -50 cm. The needle is 50 cm in front of the lens.
  2. 1f=1v−1u=150+150=125\dfrac{1}{f} = \dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{50} + \dfrac{1}{50} = \dfrac{1}{25}, so f=25f = 25 cm =0.25= 0.25 m.
  3. P=10.25=+4P = \dfrac{1}{0.25} = +4 D
Answer50 cm in front of the lens; power +4 D.
Ask about this question
Q3

Section 9.3 (b), Intext question 3

Find the power of a concave lens of focal length 2 m.

Tests: Using P = 1/f with the sign convention.

Show solution
  1. f=−2f = -2 m, P=1f=−0.5P = \dfrac{1}{f} = -0.5 D
Answer−0.5 D
Ask about this question

Exercises (end of chapter)

Q1

Chapter 9 exercise, Question 1

Which one of the following materials cannot be used to make a lens? (a) Water (b) Glass (c) Plastic (d) Clay

Tests: Knowing a lens must be transparent.

Show solution
  1. A lens must let light through. Clay is opaque.
Answer(d) Clay
Ask about this question
Q2

Chapter 9 exercise, Question 2

The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should the position of the object be? (a) Between the principal focus and the centre of curvature (b) At the centre of curvature (c) Beyond the centre of curvature (d) Between the pole of the mirror and its principal focus.

Tests: Linking object position to image nature for a concave mirror.

Show solution
  1. A concave mirror forms a virtual, erect, enlarged image only when the object is between P and F.
Answer(d) Between the pole and the principal focus
Ask about this question
Q3

Chapter 9 exercise, Question 3

Where should an object be placed in front of a convex lens to get a real image of the size of the object? (a) At the principal focus of the lens (b) At twice the focal length (c) At infinity (d) Between the optical centre of the lens and its principal focus.

Tests: Locating the object for a same-size real image.

Show solution
  1. At 2F12F_1 (u=−2fu = -2f), the lens formula gives v=+2fv = +2f and m=−1m = -1: a real, inverted image of the same size.
Answer(b) At twice the focal length
Ask about this question
Q4

Chapter 9 exercise, Question 4

A spherical mirror and a thin spherical lens have each a focal length of −15 cm. The mirror and the lens are likely to be (a) both concave (b) both convex (c) the mirror is concave and the lens is convex (d) the mirror is convex, but the lens is concave.

Tests: Reading mirror and lens type from the sign of f.

Show solution
  1. Negative focal length: concave mirror (focus in front) and concave lens (diverging).
Answer(a) both concave
Ask about this question
Q5

Chapter 9 exercise, Question 5

No matter how far you stand from a mirror, your image appears erect. The mirror is likely to be (a) only plane (b) only concave (c) only convex (d) either plane or convex.

Tests: Knowing which mirrors always give erect images.

Show solution
  1. Plane and convex mirrors always form erect (virtual) images. A concave mirror gives inverted images once you are beyond F.
Answer(d) either plane or convex
Ask about this question
Q6

Chapter 9 exercise, Question 6

Which of the following lenses would you prefer to use while reading small letters found in a dictionary? (a) A convex lens of focal length 50 cm (b) A concave lens of focal length 50 cm (c) A convex lens of focal length 5 cm (d) A concave lens of focal length 5 cm.

Tests: Choosing a magnifying lens.

Show solution
  1. A convex lens with the object inside F gives a virtual, enlarged image. The shorter the focal length, the greater the magnification.
Answer(c) A convex lens of focal length 5 cm
Ask about this question
Q7

Chapter 9 exercise, Question 7

We wish to obtain an erect image of an object, using a concave mirror of focal length 15 cm. What should be the range of distance of the object from the mirror? What is the nature of the image? Is the image larger or smaller than the object? Draw a ray diagram to show the image formation in this case.

Tests: Using the object range for a virtual image in a concave mirror.

Show solution
  1. Between the pole and the focus: more than 0 and less than 15 cm from the mirror.
  2. The image is virtual, erect and larger than the object, behind the mirror.
  3. Ray diagram: a ray parallel to the axis reflects through F; a ray towards C (or through P) reflects back; produce both reflected rays backwards behind the mirror, where they meet at the image.
AnswerObject between 0 and 15 cm from the mirror; image virtual, erect and larger.
Ask about this question
Q8

Chapter 9 exercise, Question 8

Name the type of mirror used in the following situations. Support your answer with reason.
  1. (a)
    Headlights of a car
  2. (b)
    Side/rear-view mirror of a vehicle
  3. (c)
    Solar furnace

Tests: Matching mirror types to uses.

Show solution

(a) Headlights of a car

  1. Concave: with the bulb at the focus, it sends out a strong parallel beam.
AnswerConcave

(b) Side/rear-view mirror of a vehicle

  1. Convex: always gives an erect, diminished image and a wide field of view.
AnswerConvex

(c) Solar furnace

  1. Concave: it concentrates sunlight at its focus, producing high temperature.
AnswerConcave
Ask about this question
Q9

Chapter 9 exercise, Question 9

One-half of a convex lens is covered with a black paper. Will this lens produce a complete image of the object? Verify your answer experimentally. Explain your observations.

Tests: Understanding that every part of a lens forms the whole image.

Show solution
  1. Yes. Rays from every point of the object still pass through the uncovered half and meet at the image, so the complete image forms. It is less bright because less light passes. Try it with a candle, a lens half covered with paper, and a screen.
AnswerYes, a complete image forms, but it is dimmer.
Ask about this question
Q10

Chapter 9 exercise, Question 10

An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and the nature of the image formed.

Tests: Using the lens formula and magnification.

Show solution
  1. u=−25u = -25 cm, f=+10f = +10 cm. 1v=1f+1u=110−125=350\dfrac{1}{v} = \dfrac{1}{f} + \dfrac{1}{u} = \dfrac{1}{10} - \dfrac{1}{25} = \dfrac{3}{50}, so v≈+16.7v \approx +16.7 cm.
  2. m=vu=16.7−25≈−0.67m = \dfrac{v}{u} = \dfrac{16.7}{-25} \approx -0.67; h′=mh≈−3.3h' = mh \approx -3.3 cm.
  3. The image is 16.7 cm behind the lens, real, inverted and diminished (3.3 cm).
Answer16.7 cm on the other side; 3.3 cm tall; real, inverted, diminished.
Ask about this question
Q11

Chapter 9 exercise, Question 11

A concave lens of focal length 15 cm forms an image 10 cm from the lens. How far is the object placed from the lens? Draw the ray diagram.

Tests: Using the lens formula for a diverging lens.

Show solution
  1. f=−15f = -15 cm, v=−10v = -10 cm (virtual image, same side).
  2. 1u=1v−1f=−110+115=−130\dfrac{1}{u} = \dfrac{1}{v} - \dfrac{1}{f} = -\dfrac{1}{10} + \dfrac{1}{15} = -\dfrac{1}{30}, so u=−30u = -30 cm.
Answer30 cm in front of the lens.
Ask about this question
Q12

Chapter 9 exercise, Question 12

An object is placed at a distance of 10 cm from a convex mirror of focal length 15 cm. Find the position and nature of the image.

Tests: Using the mirror formula for a convex mirror.

Show solution
  1. u=−10u = -10 cm, f=+15f = +15 cm. 1v=1f−1u=115+110=16\dfrac{1}{v} = \dfrac{1}{f} - \dfrac{1}{u} = \dfrac{1}{15} + \dfrac{1}{10} = \dfrac{1}{6}, so v=+6v = +6 cm.
  2. m=−vu=−6−10=+0.6m = -\dfrac{v}{u} = -\dfrac{6}{-10} = +0.6: virtual, erect, diminished, 6 cm behind the mirror.
Answer6 cm behind the mirror; virtual, erect, diminished.
Ask about this question
Q13

Chapter 9 exercise, Question 13

The magnification produced by a plane mirror is +1. What does this mean?

Tests: Reading the size and sign of magnification.

Show solution
  1. Size 1: the image is the same size as the object. Sign +: the image is erect (and virtual).
AnswerThe image is the same size as the object and erect.
Ask about this question
Q14

Chapter 9 exercise, Question 14

An object 5.0 cm in length is placed at a distance of 20 cm in front of a convex mirror of radius of curvature 30 cm. Find the position of the image, its nature and size.

Tests: Using R, the mirror formula and magnification together.

Show solution
  1. f=R2=+15f = \dfrac{R}{2} = +15 cm, u=−20u = -20 cm. 1v=115+120=760\dfrac{1}{v} = \dfrac{1}{15} + \dfrac{1}{20} = \dfrac{7}{60}, so v≈+8.6v \approx +8.6 cm.
  2. m=−vu≈0.43m = -\dfrac{v}{u} \approx 0.43; h′=0.43×5≈2.1h' = 0.43 \times 5 \approx 2.1 cm.
  3. Virtual, erect and diminished, 8.6 cm behind the mirror.
Answer8.6 cm behind the mirror; virtual, erect, 2.1 cm tall.
Ask about this question
Q15

Chapter 9 exercise, Question 15

An object of size 7.0 cm is placed at 27 cm in front of a concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed, so that a sharp focussed image can be obtained? Find the size and the nature of the image.

Tests: Locating a real image on a screen with the mirror formula.

Show solution
  1. u=−27u = -27 cm, f=−18f = -18 cm. 1v=1f−1u=−118+127=−154\dfrac{1}{v} = \dfrac{1}{f} - \dfrac{1}{u} = -\dfrac{1}{18} + \dfrac{1}{27} = -\dfrac{1}{54}, so v=−54v = -54 cm.
  2. m=−vu=−−54−27=−2m = -\dfrac{v}{u} = -\dfrac{-54}{-27} = -2; h′=−2×7=−14h' = -2 \times 7 = -14 cm.
  3. Place the screen 54 cm in front of the mirror. The image is real, inverted and enlarged, 14 cm tall.
AnswerScreen 54 cm in front of the mirror; image 14 cm, real, inverted, enlarged.
Ask about this question
Q16

Chapter 9 exercise, Question 16

Find the focal length of a lens of power −2.0 D. What type of lens is this?

Tests: Converting power to focal length.

Show solution
  1. f=1P=1−2=−0.5f = \dfrac{1}{P} = \dfrac{1}{-2} = -0.5 m =−50= -50 cm. Negative focal length: a concave (diverging) lens.
Answer−50 cm; a concave lens.
Ask about this question
Q17

Chapter 9 exercise, Question 17

A doctor has prescribed a corrective lens of power +1.5 D. Find the focal length of the lens. Is the prescribed lens diverging or converging?

Tests: Converting power to focal length and type.

Show solution
  1. f=11.5≈0.667f = \dfrac{1}{1.5} \approx 0.667 m ≈66.7\approx 66.7 cm. Positive: a converging (convex) lens.
AnswerAbout 66.7 cm; converging.
Ask about this question

Chapter notes

Questions are from the NCERT Class 10 Science textbook, Chapter 9; word problems are paraphrased with every number kept.

Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.

Check yourself on this chapter

Practise with fresh questions at your level, free: 10 questions a day with an account.