AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

Class 10 Science Chapter 9 Intext Questions and Answers

Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 9. Every numerical answer is recomputed with the mirror or lens formula and the sign convention, which is where most marks are lost.

NCERT solutions for the intext questions of Class 10 Science Chapter 9 Light – Reflection and Refraction: all 14 questions answered step by step, as ideal answers in the CBSE board format. Free, with a doubt chat on every question.

Key ideas
  • Sign convention: measure from the pole or optical centre; the object is on the left, so u is negative. Concave mirror and concave lens: f negative. Convex: f positive.
  • Mirror: 1v+1u=1f\dfrac{1}{v} + \dfrac{1}{u} = \dfrac{1}{f}, m=−vum = -\dfrac{v}{u}, f=R2f = \dfrac{R}{2}.
  • Lens: 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f}, m=vum = \dfrac{v}{u}, power P=1fP = \dfrac{1}{f} (f in metres, P in dioptres).
  • Refractive index n=cvn = \dfrac{c}{v}: light slows and bends towards the normal entering a denser medium.
  • Negative m: real and inverted. Positive m: virtual and erect.

In-text questions: spherical mirrors (section 9.2)

Q1

Section 9.2 (a), Intext question 1

Define the principal focus of a concave mirror.

Tests: Defining the principal focus of a concave mirror.

Show solution
  1. Rays parallel to the principal axis, after reflection from a concave mirror, meet at a point on the principal axis. That point is the principal focus (F).
AnswerThe point on the principal axis where rays parallel to the axis meet after reflection.
Ask about this question
Q2

Section 9.2 (a), Intext question 2

The radius of curvature of a spherical mirror is 20 cm. What is its focal length?

Tests: Using f = R/2.

Show solution
  1. f=R2=202=10f = \dfrac{R}{2} = \dfrac{20}{2} = 10 cm
Answer10 cm
Ask about this question
Q3

Section 9.2 (a), Intext question 3

Name a mirror that can give an erect and enlarged image of an object.

Tests: Knowing which mirror gives an enlarged virtual image.

Show solution
  1. A concave mirror, with the object between the pole and the principal focus. The image is virtual, erect and enlarged.
AnswerA concave mirror (object between P and F).
Ask about this question
Q4

Section 9.2 (a), Intext question 4

Why do we prefer a convex mirror as a rear-view mirror in vehicles?

Tests: Explaining the use of convex mirrors.

Show solution
  1. A convex mirror always forms an erect, diminished image, and because it bulges outwards it gives a much wider field of view, so the driver sees more of the traffic behind.
AnswerIt always gives an erect image and a wider field of view.
Ask about this question

In-text questions: mirror formula and magnification (section 9.2)

Q1

Section 9.2 (b), Intext question 1

Find the focal length of a convex mirror whose radius of curvature is 32 cm.

Tests: Using f = R/2 with the sign convention.

Show solution
  1. f=R2=+322=+16f = \dfrac{R}{2} = \dfrac{+32}{2} = +16 cm (behind the mirror).
Answer+16 cm
Ask about this question
Q2

Section 9.2 (b), Intext question 2

A concave mirror produces three times magnified (enlarged) real image of an object placed at 10 cm in front of it. Where is the image located?

Tests: Using magnification with the sign convention.

Show solution
  1. Real image, so inverted: m=−3m = -3. u=−10u = -10 cm.
  2. m=−vum = -\dfrac{v}{u}, so v=−mu=−(−3)(−10)=−30v = -mu = -(-3)(-10) = -30 cm.
Answer30 cm in front of the mirror (v=−30v = -30 cm).
Ask about this question

In-text questions: refraction and refractive index (section 9.3)

Q1

Section 9.3 (a), Intext question 1

A ray of light travelling in air enters obliquely into water. Does the light ray bend towards the normal or away from the normal? Why?

Tests: Predicting the direction of bending from optical density.

Show solution
  1. Towards the normal. Water is optically denser than air, so light slows down on entering it and bends towards the normal.
AnswerTowards the normal, because light slows down in the denser water.
Ask about this question
Q2

Section 9.3 (a), Intext question 2

Light enters from air to glass having refractive index 1.50. What is the speed of light in the glass? The speed of light in vacuum is 3 × 10⁸ m s⁻¹.

Tests: Using n = c/v.

Show solution
  1. v=cn=3×1081.50=2×108 m s−1v = \dfrac{c}{n} = \dfrac{3 \times 10^{8}}{1.50} = 2 \times 10^{8}\ \text{m s}^{-1}
Answer2×1082 \times 10^{8} m/s
Ask about this question
Q3

Section 9.3 (a), Intext question 3

Find out, from Table 9.3, the medium having the highest optical density. Also find the medium with the lowest optical density.

Tests: Reading optical density from refractive index.

Show solution
  1. The higher the refractive index, the higher the optical density. Highest: diamond (2.42). Lowest: air (1.0003).
AnswerHighest: diamond. Lowest: air.
Ask about this question
Q4

Section 9.3 (a), Intext question 4

You are given kerosene, turpentine and water. In which of these does the light travel fastest? Use the information given in Table 9.3.

Tests: Linking refractive index to the speed of light.

Show solution
  1. Refractive indices: kerosene 1.44, turpentine oil 1.47, water 1.33. Speed =cn= \dfrac{c}{n} is greatest for the smallest n: water.
AnswerWater
Ask about this question
Q5

Section 9.3 (a), Intext question 5

The refractive index of diamond is 2.42. What is the meaning of this statement?

Tests: Interpreting a refractive index.

Show solution
  1. The speed of light in vacuum is 2.42 times its speed in diamond: n=cv=2.42n = \dfrac{c}{v} = 2.42, so v≈1.24×108v \approx 1.24 \times 10^{8} m/s.
AnswerLight travels 2.42 times slower in diamond than in vacuum.
Ask about this question

In-text questions: lenses and power (section 9.3)

Q1

Section 9.3 (b), Intext question 1

Define 1 dioptre of power of a lens.

Tests: Defining the dioptre.

Show solution
  1. P=1fP = \dfrac{1}{f} with f in metres. 1 dioptre is the power of a lens whose focal length is 1 m.
AnswerThe power of a lens of focal length 1 metre.
Ask about this question
Q2

Section 9.3 (b), Intext question 2

A convex lens forms a real and inverted image of a needle at a distance of 50 cm from it. Where is the needle placed in front of the convex lens if the image is equal to the size of the object? Also, find the power of the lens.

Tests: Using the 2F position and the lens formula.

Show solution
  1. Real, inverted and equal in size: m=−1m = -1, so u=−v=−50u = -v = -50 cm. The needle is 50 cm in front of the lens.
  2. 1f=1v−1u=150+150=125\dfrac{1}{f} = \dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{50} + \dfrac{1}{50} = \dfrac{1}{25}, so f=25f = 25 cm =0.25= 0.25 m.
  3. P=10.25=+4P = \dfrac{1}{0.25} = +4 D
Answer50 cm in front of the lens; power +4 D.
Ask about this question
Q3

Section 9.3 (b), Intext question 3

Find the power of a concave lens of focal length 2 m.

Tests: Using P = 1/f with the sign convention.

Show solution
  1. f=−2f = -2 m, P=1f=−0.5P = \dfrac{1}{f} = -0.5 D
Answer−0.5 D
Ask about this question

Chapter notes

Questions are from the NCERT Class 10 Science textbook, Chapter 9; word problems are paraphrased with every number kept.

Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.

Check yourself on this chapter

Practise with fresh questions at your level, free: 10 questions a day with an account.