AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.
ScienceClass 10CBSE
NCERT Solutions for Class 10 Science Chapter 1: Chemical Reactions and Equations
Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 1. Every equation is balanced and checked. Open a solution one step at a time, tap a follow-up question, or ask your own doubt about any step.
These are complete NCERT question answers for Class 10 Science Chapter 1, Chemical Reactions and Equations: all the intext questions and end-of-chapter exercise questions. Each one is an ideal answer written the way the CBSE marking scheme gives step marks: the rule or formula, the working, and the final answer stated clearly.
Key ideas
A balanced equation has the same number of atoms of each element on both sides (law of conservation of mass). Change coefficients, never formulas.
State symbols: (s) solid, (l) liquid, (g) gas, (aq) dissolved in water.
Combination: two substances form one. Decomposition: one splits into two or more (by heat, light or electricity).
Displacement: a more reactive element replaces a less reactive one. Double displacement: two compounds exchange ions.
Oxidation is gain of oxygen (or loss of hydrogen); reduction is loss of oxygen (or gain of hydrogen). They happen together.
In-text questions: chemical equations (after 1.1)
Q1
Section 1.1, Intext question 1
Why should a magnesium ribbon be cleaned before burning it in air?
Tests: Explaining what has to happen before a reaction can be observed cleanly.
Show solution
Magnesium reacts slowly with oxygen in the air, so a stored ribbon is covered with a thin layer of magnesium oxide.
This layer stops oxygen reaching the metal underneath, so the ribbon is hard to light and burns poorly.
Rubbing it with sandpaper removes the oxide layer and exposes fresh magnesium, which burns with a dazzling white flame.
AnswerTo remove the layer of magnesium oxide on its surface, so that the fresh metal can react with oxygen.
Ask about this question
Q2
Section 1.1, Intext question 2
Write the balanced equation for each of the following reactions.
Why: Aluminium is +3 and sulphate is −2, so aluminium sulphate is Al₂(SO₄)₃.
Three sulphate groups on the left need 3 BaSO₄ on the right; that uses 3 Ba, so 3 BaCl₂ on the left.
3 BaCl₂ gives 6 Cl, so 2 AlCl₃ on the right, which also uses the 2 Al: 3BaCl2+Al2(SO4)3→3BaSO4+2AlCl3.
Answer3BaCl2+Al2(SO4)3→3BaSO4+2AlCl3
(iii)Sodium + Water → Sodium hydroxide + Hydrogen
Skeletal: Na+H2O→NaOH+H2. Hydrogen: 2 on the left, 3 on the right.
Use 2 H₂O and 2 NaOH (4 H on each side with H₂), then 2 Na: 2Na+2H2O→2NaOH+H2.
Answer2Na+2H2O→2NaOH+H2
Ask about this question
Q3
Section 1.1, Intext question 3
Write a balanced chemical equation, with state symbols, for each reaction.
(i)
Solutions of barium chloride and sodium sulphate in water react to give insoluble barium sulphate and a solution of sodium chloride.
(ii)
Sodium hydroxide solution reacts with hydrochloric acid solution to produce sodium chloride solution and water.
Tests: Writing balanced equations with the physical state of every substance: (s), (l), (g), (aq).
Show solution
(i)Solutions of barium chloride and sodium sulphate in water react to give insoluble barium sulphate and a solution of sodium chloride.
Both reactants are dissolved in water: (aq). Barium sulphate is insoluble: (s). Sodium chloride stays in solution: (aq).
Balance chlorine and sodium with 2 NaCl: BaCl2(aq)+Na2SO4(aq)→BaSO4(s)+2NaCl(aq).
AnswerBaCl2(aq)+Na2SO4(aq)→BaSO4(s)+2NaCl(aq)
(ii)Sodium hydroxide solution reacts with hydrochloric acid solution to produce sodium chloride solution and water.
Reactants and sodium chloride are in solution: (aq). Water formed is a liquid: (l).
The equation is already balanced: NaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l).
AnswerNaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l)
Ask about this question
In-text questions: combination and decomposition (section 1.2)
Q1
Section 1.2 (a), Intext question 1
A solution of a substance 'X' is used for white washing.
(i)
Name the substance 'X' and write its formula.
(ii)
Write the reaction of the substance 'X' with water.
Tests: Recognising a combination reaction and writing its equation.
Show solution
(i)Name the substance 'X' and write its formula.
X is calcium oxide (quicklime), CaO. It is mixed with water to make the white wash.
AnswerCalcium oxide (quicklime), CaO.
(ii)Write the reaction of the substance 'X' with water.
Calcium oxide reacts vigorously with water to form slaked lime, calcium hydroxide, giving out a lot of heat: CaO(s)+H2O(l)→Ca(OH)2(aq).
On the wall, calcium hydroxide slowly reacts with carbon dioxide in air to form a thin shiny layer of calcium carbonate: Ca(OH)2(aq)+CO2(g)→CaCO3(s)+H2O(l).
AnswerCaO(s)+H2O(l)→Ca(OH)2(aq)
Ask about this question
Q2
Section 1.2 (a), Intext question 2
In the activity on electrolysis of water, why is the amount of gas collected in one test tube double the amount in the other? Name this gas.
Tests: Reading the ratio of products from a balanced decomposition equation.
Show solution
Water decomposes on passing electricity: 2H2O(l)electricity2H2(g)+O2(g).
Two volumes of hydrogen form for every one volume of oxygen, so one tube collects twice as much gas.
AnswerWater gives hydrogen and oxygen in the ratio 2 : 1 by volume. The tube with double the gas holds hydrogen.
Ask about this question
In-text questions: displacement, double displacement and redox (section 1.2)
Q1
Section 1.2 (b), Intext question 1
Why does the colour of copper sulphate solution change when an iron nail is dipped in it?
Tests: Explaining a displacement reaction from what you observe.
Show solution
Iron is more reactive than copper, so it displaces copper from copper sulphate: Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s).
The blue copper sulphate is replaced by light green iron sulphate, and brown copper coats the nail.
AnswerIron displaces copper. Blue copper sulphate becomes light green iron sulphate, and a brown coating of copper forms on the nail.
Ask about this question
Q2
Section 1.2 (b), Intext question 2
Give an example of a double displacement reaction other than the reaction of sodium sulphate with barium chloride.
Tests: Giving a correct example of a double displacement reaction.
Show solution
Silver nitrate and sodium chloride exchange ions, forming a white precipitate of silver chloride: AgNO3(aq)+NaCl(aq)→AgCl(s)+NaNO3(aq).
AnswerAgNO3(aq)+NaCl(aq)→AgCl(s)+NaNO3(aq)
Ask about this question
Q3
Section 1.2 (b), Intext question 3
Identify the substances that are oxidised and the substances that are reduced in the following reactions.
(i)
4Na(s)+O2(g)→2Na2O(s)
(ii)
CuO(s)+H2(g)→Cu(s)+H2O(l)
Tests: Identifying what is oxidised and reduced by gain or loss of oxygen or hydrogen.
Show solution
(i)4Na(s)+O2(g)→2Na2O(s)
Sodium gains oxygen to become sodium oxide: sodium is oxidised.
Oxygen is the substance that oxidises it, so oxygen is reduced.
Which statements about the reaction 2PbO(s)+C(s)→2Pb(s)+CO2(g) are incorrect? (a) Lead is getting reduced. (b) Carbon dioxide is getting oxidised. (c) Carbon is getting oxidised. (d) Lead oxide is getting reduced. Options: (i) (a) and (b) (ii) (a) and (c) (iii) (a), (b) and (c) (iv) all
Tests: Identifying the substance oxidised and the substance reduced in a reaction.
Show solution
Lead oxide (PbO) loses oxygen, so lead oxide is reduced: (d) is correct and (a) is incorrect, because lead is the product of the reduction, not the substance reduced.
Carbon gains oxygen to form CO₂, so carbon is oxidised: (c) is correct.
Carbon dioxide is only a product; it is not being oxidised: (b) is incorrect.
Answer(i) (a) and (b)
Ask about this question
Q2
Chapter 1 exercise, Question 2
Fe2O3+2Al→Al2O3+2Fe is an example of a (a) combination reaction (b) double displacement reaction (c) decomposition reaction (d) displacement reaction.
Tests: Classifying a reaction by what swaps places.
Show solution
Aluminium, the more reactive metal, displaces iron from iron oxide. One element replacing another in a compound is a displacement reaction.
Answer(d) displacement reaction
Ask about this question
Q3
Chapter 1 exercise, Question 3
What happens when dilute hydrochloric acid is added to iron filings? (a) Hydrogen gas and iron chloride are produced. (b) Chlorine gas and iron hydroxide are produced. (c) No reaction takes place. (d) Iron salt and water are produced.
Tests: Predicting the products of a metal reacting with a dilute acid.
Show solution
Iron is above hydrogen in the reactivity series, so it displaces hydrogen from the acid: Fe(s)+2HCl(aq)→FeCl2(aq)+H2(g).
Answer(a) Hydrogen gas and iron chloride are produced.
Ask about this question
Q4
Chapter 1 exercise, Question 4
What is a balanced chemical equation? Why should chemical equations be balanced?
Tests: Linking a balanced equation to the law of conservation of mass.
Show solution
A balanced chemical equation has the same number of atoms of each element on both sides of the arrow.
Mass can neither be created nor destroyed in a chemical reaction (law of conservation of mass). Atoms are only rearranged, so their number cannot change.
Example: Zn+H2SO4→ZnSO4+H2 has one Zn, two H, one S and four O on each side.
AnswerAn equation with equal numbers of each kind of atom on both sides. It must be balanced because of the law of conservation of mass.
Ask about this question
Q5
Chapter 1 exercise, Question 5
Translate the following statements into chemical equations and then balance them.
(a)
Hydrogen gas combines with nitrogen to form ammonia.
(b)
Hydrogen sulphide gas burns in air to give water and sulphur dioxide.
(c)
Barium chloride reacts with aluminium sulphate to give aluminium chloride and a precipitate of barium sulphate.
(d)
Potassium metal reacts with water to give potassium hydroxide and hydrogen gas.
Tests: Writing a balanced chemical equation from a word statement.
Show solution
(a)Hydrogen gas combines with nitrogen to form ammonia.
H2+N2→NH3 → 2 NH₃ for nitrogen, then 3 H₂ for hydrogen: 3H2(g)+N2(g)→2NH3(g).
Answer3H2(g)+N2(g)→2NH3(g)
(b)Hydrogen sulphide gas burns in air to give water and sulphur dioxide.
Skeletal: H2S+O2→H2O+SO2.
Take 2 H₂S: that gives 2 H₂O and 2 SO₂, which need 6 O atoms, so 3 O₂: 2H2S(g)+3O2(g)→2H2O(l)+2SO2(g).
Answer2H2S(g)+3O2(g)→2H2O(l)+2SO2(g)
(c)Barium chloride reacts with aluminium sulphate to give aluminium chloride and a precipitate of barium sulphate.
Three sulphates need 3 BaSO₄ and 3 BaCl₂; 6 Cl need 2 AlCl₃: 3BaCl2(aq)+Al2(SO4)3(aq)→2AlCl3(aq)+3BaSO4(s).
Energy is released, which our body uses, so respiration is exothermic.
AnswerGlucose combines with oxygen in our cells and releases energy, so respiration is an exothermic reaction.
Ask about this question
Q11
Chapter 1 exercise, Question 11
Why are decomposition reactions called the opposite of combination reactions? Write equations for these reactions.
Tests: Comparing combination and decomposition reactions with equations.
Show solution
In a combination reaction two or more substances form one product: 2H2(g)+O2(g)→2H2O(l).
In a decomposition reaction one substance splits into two or more: 2H2O(l)electricity2H2(g)+O2(g).
One builds a product from reactants; the other breaks it back down, so they are opposite processes.
AnswerCombination joins substances into one product; decomposition splits one substance into simpler ones, the reverse process.
Ask about this question
Q12
Chapter 1 exercise, Question 12
Write one equation each for decomposition reactions where energy is supplied in the form of heat, light or electricity.
Heat
Thermal decomposition
Light
Photolytic decomposition
Electricity
Electrolytic decomposition
Tests: Naming thermal, photolytic and electrolytic decomposition with an example of each.
Show solution
HeatThermal decomposition
CaCO3(s)heatCaO(s)+CO2(g)
AnswerCaCO3(s)heatCaO(s)+CO2(g)
LightPhotolytic decomposition
2AgCl(s)sunlight2Ag(s)+Cl2(g). White silver chloride turns grey.
Answer2AgCl(s)sunlight2Ag(s)+Cl2(g)
ElectricityElectrolytic decomposition
2H2O(l)electricity2H2(g)+O2(g)
Answer2H2O(l)electricity2H2(g)+O2(g)
Ask about this question
Q13
Chapter 1 exercise, Question 13
What is the difference between displacement and double displacement reactions? Write equations for these reactions.
Tests: Distinguishing displacement from double displacement with equations.
Show solution
Displacement: a more reactive element takes the place of a less reactive one in a compound. Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)
Double displacement: two compounds exchange ions. Na2SO4(aq)+BaCl2(aq)→BaSO4(s)+2NaCl(aq)
AnswerIn displacement one element replaces another; in double displacement two compounds exchange ions.
Ask about this question
Q14
Chapter 1 exercise, Question 14
In the refining of silver, silver is recovered from silver nitrate solution by displacement with copper metal. Write down the reaction involved.
Tests: Writing a displacement reaction used in practice.
Show solution
Copper is more reactive than silver: Cu(s)+2AgNO3(aq)→Cu(NO3)2(aq)+2Ag(s).
AnswerCu(s)+2AgNO3(aq)→Cu(NO3)2(aq)+2Ag(s)
Ask about this question
Q15
Chapter 1 exercise, Question 15
What do you mean by a precipitation reaction? Explain by giving examples.
Tests: Defining a precipitation reaction and recognising the insoluble product.
Show solution
A reaction that produces an insoluble solid (a precipitate) from solutions is a precipitation reaction.
White precipitate of barium sulphate: Na2SO4(aq)+BaCl2(aq)→BaSO4(s)+2NaCl(aq).
Yellow precipitate of lead iodide: Pb(NO3)2(aq)+2KI(aq)→PbI2(s)+2KNO3(aq).
AnswerA reaction that forms an insoluble solid (precipitate), such as BaSO₄ from sodium sulphate and barium chloride, or PbI₂ from lead nitrate and potassium iodide.
Ask about this question
Q16
Chapter 1 exercise, Question 16
Explain the following in terms of gain or loss of oxygen, with two examples each.
(a)
Oxidation
(b)
Reduction
Tests: Defining oxidation and reduction by gain or loss of oxygen.
Show solution
(a)Oxidation
Oxidation is the gain of oxygen by a substance.
2Cu(s)+O2(g)heat2CuO(s) and 2Mg(s)+O2(g)→2MgO(s): copper and magnesium gain oxygen.
AnswerGain of oxygen, e.g. copper to copper oxide, magnesium to magnesium oxide.
(b)Reduction
Reduction is the loss of oxygen by a substance.
CuO(s)+H2(g)→Cu(s)+H2O(l) and ZnO(s)+C(s)→Zn(s)+CO(g): copper oxide and zinc oxide lose oxygen.
AnswerLoss of oxygen, e.g. copper oxide to copper, zinc oxide to zinc.
Ask about this question
Q17
Chapter 1 exercise, Question 17
A shiny brown-coloured element 'X' on heating in air becomes black in colour. Name the element 'X' and the black coloured compound formed.
Tests: Identifying a substance from an observed oxidation.
Show solution
X is copper. On heating it combines with oxygen to form black copper oxide: 2Cu(s)+O2(g)heat2CuO(s).
AnswerX is copper (Cu); the black compound is copper(II) oxide (CuO).
Ask about this question
Q18
Chapter 1 exercise, Question 18
Why do we apply paint on iron articles?
Tests: Explaining how a coating prevents corrosion.
Show solution
Iron rusts when it is exposed to both air (oxygen) and moisture.
Paint covers the surface and keeps air and water away from the iron, so rusting is prevented.
AnswerPaint keeps air and moisture away from iron and so prevents rusting (corrosion).
Ask about this question
Q19
Chapter 1 exercise, Question 19
Oil and fat containing food items are flushed with nitrogen. Why?
Tests: Explaining how rancidity is prevented.
Show solution
Fats and oils are oxidised by oxygen in air and become rancid: their smell and taste change.
Nitrogen is unreactive. Filling the packet with it removes the oxygen, so the food does not get oxidised.
AnswerNitrogen replaces oxygen in the packet, which stops the fats and oils from being oxidised and becoming rancid.
Ask about this question
Q20
Chapter 1 exercise, Question 20
Explain the following terms with one example each.
(a)
Corrosion
(b)
Rancidity
Tests: Explaining corrosion and rancidity as effects of oxidation.
Show solution
(a)Corrosion
Corrosion is the slow eating away of a metal by air, moisture or chemicals around it. Example: iron rusts, forming a reddish-brown flaky coating; silver turns black; copper gets a green coating.
AnswerA metal being attacked by its surroundings, e.g. rusting of iron.
(b)Rancidity
Rancidity is the oxidation of fats and oils in food, which changes their smell and taste. Example: chips or butter left open for long smell and taste bad.
AnswerOxidation of fats and oils in food, e.g. stale chips smelling bad.
Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.
Check yourself on this chapter
Practise with fresh questions at your level, free: 10 questions a day with an account.