AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.
ScienceClass 10CBSE
NCERT Solutions for Class 10 Science Chapter 2: Acids, Bases and Salts
Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 2. Every equation is balanced and checked, and every pH answer is worked from the scale.
These are complete NCERT question answers for Class 10 Science Chapter 2, Acids, Bases and Salts: all the intext questions and end-of-chapter exercise questions. Each one is an ideal answer written the way the CBSE marking scheme gives step marks: the rule or formula, the working, and the final answer stated clearly.
Key ideas
Acids give H⁺ (H₃O⁺) ions in water; bases give OH⁻ ions. Without water there is no acidic behaviour.
Acid + metal → salt + hydrogen. Acid + metal carbonate → salt + water + carbon dioxide. Acid + base → salt + water (neutralisation).
pH below 7 is acidic, 7 is neutral, above 7 is basic. The lower the pH, the higher the H⁺ concentration.
Always add acid to water, slowly, never water to acid: the mixing is highly exothermic.
From common salt: NaOH (chlor-alkali), bleaching powder CaOCl₂, baking soda NaHCO₃, washing soda Na₂CO₃·10H₂O. Plaster of Paris CaSO₄·½H₂O sets with water into gypsum CaSO₄·2H₂O.
In-text questions: identifying acids and bases (section 2.1)
Q1
Section 2.1 (a), Intext question 1
You have been provided with three test tubes. One of them contains distilled water and the other two contain an acidic solution and a basic solution, respectively. If you are given only red litmus paper, how will you identify the contents of each test tube?
Tests: Using one indicator, step by step, to tell an acid, a base and water apart.
Show solution
Dip red litmus into each solution. The one that turns it blue is the basic solution.
Take that blue litmus paper and dip it into the other two. The one that turns it back red is the acid.
The solution that changes neither red nor blue litmus is distilled water (neutral).
AnswerRed litmus turns blue in the base. That blue paper turns red in the acid. The one with no change is distilled water.
Ask about this question
In-text questions: reactions of acids and bases (section 2.1)
Q1
Section 2.1 (b), Intext question 1
Why should curd and sour substances not be kept in brass and copper vessels?
Tests: Explaining why acids must not be stored in reactive metal containers.
Show solution
Curd and sour foods contain acids (curd has lactic acid).
These acids react with copper and with the zinc in brass, forming salts that are poisonous and spoil the food. The vessel is also corroded.
AnswerThe acids in them react with copper and brass, forming toxic compounds that make the food unsafe to eat.
Ask about this question
Q2
Section 2.1 (b), Intext question 2
Which gas is usually liberated when an acid reacts with a metal? Illustrate with an example. How will you test for the presence of this gas?
Tests: Writing the reaction of an acid with a metal and the test for hydrogen.
Show solution
Hydrogen gas is liberated.
Example: zinc with dilute sulphuric acid, Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g).
Test: bring a burning candle near the gas. It burns with a pop sound, which shows hydrogen.
AnswerHydrogen. Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g). It burns with a pop sound when a burning candle is brought near.
Ask about this question
Q3
Section 2.1 (b), Intext question 3
Metal compound A reacts with dilute hydrochloric acid to produce effervescence. The gas evolved extinguishes a burning candle. Write a balanced chemical equation for the reaction if one of the compounds formed is calcium chloride.
Tests: Identifying a metal carbonate from its reaction with an acid.
Show solution
A gas that extinguishes a burning candle is carbon dioxide, so A is a carbonate. Calcium chloride forms, so A is calcium carbonate.
CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g)
AnswerA is calcium carbonate. CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g)
Ask about this question
In-text questions: what acids and bases have in common (after 2.2)
Q1
Section 2.2, Intext question 1
Why do HCl, HNO₃, etc., show acidic characters in aqueous solutions while solutions of compounds like alcohol and glucose do not show acidic character?
Tests: Linking acidic behaviour to H⁺ ions in water.
Show solution
HCl and HNO₃ ionise in water and give H⁺ ions, which combine with water to form H₃O⁺ ions. These ions cause acidic behaviour.
Alcohol and glucose contain hydrogen, but they do not ionise in water to give H⁺ ions, so they are not acidic.
AnswerHCl and HNO₃ release H⁺ (H₃O⁺) ions in water; alcohol and glucose do not, though they contain hydrogen.
Ask about this question
Q2
Section 2.2, Intext question 2
Why does an aqueous solution of an acid conduct electricity?
Tests: Explaining conduction in acid solutions by ions.
Show solution
An acid in water forms ions, H⁺ (as H₃O⁺) and the acid's anion, such as Cl⁻. These ions carry the current.
AnswerIt contains ions (H₃O⁺ and the anion) that carry electric current.
Ask about this question
Q3
Section 2.2, Intext question 3
Why does dry HCl gas not change the colour of the dry litmus paper?
Tests: Recognising that acids need water to release H⁺ ions.
Show solution
H⁺ ions form only when HCl dissolves in water. Dry HCl gas and dry litmus have no water, so no H⁺ ions form and the colour does not change.
AnswerWithout water, HCl does not release H⁺ ions, so it shows no acidic behaviour.
Ask about this question
Q4
Section 2.2, Intext question 4
While diluting an acid, why is it recommended that the acid should be added to water and not water to the acid?
Tests: Explaining the safe way to dilute an acid.
Show solution
Mixing a concentrated acid with water is highly exothermic.
If water is added to acid, the heat can boil the small amount of water at once, splashing acid out and even breaking the container. Adding acid slowly to a lot of water, with stirring, lets the water absorb the heat.
AnswerThe process is highly exothermic; water added to acid can boil and splash the acid out. Acid added slowly to water is safe.
Ask about this question
Q5
Section 2.2, Intext question 5
How is the concentration of hydronium ions (H₃O⁺) affected when a solution of an acid is diluted?
Tests: Relating dilution to ion concentration.
Show solution
The same H₃O⁺ ions are spread through more water, so there are fewer per unit volume. The concentration decreases.
AnswerIt decreases.
Ask about this question
Q6
Section 2.2, Intext question 6
How is the concentration of hydroxide ions (OH⁻) affected when excess base is dissolved in a solution of sodium hydroxide?
Tests: Relating added base to ion concentration.
Show solution
More base in the same volume releases more OH⁻ ions per unit volume, so the concentration increases (until the solution is saturated).
AnswerIt increases.
Ask about this question
In-text questions: how strong are acid or base solutions (after 2.3)
Q1
Section 2.3, Intext question 1
You have two solutions, A and B. The pH of solution A is 6 and pH of solution B is 8. Which solution has more hydrogen ion concentration? Which of this is acidic and which one is basic?
Tests: Reading H⁺ concentration and acidity from pH.
Show solution
The lower the pH, the higher the H⁺ concentration. A (pH 6) has more H⁺ ions than B (pH 8).
pH below 7 is acidic, above 7 is basic. So A is acidic and B is basic.
AnswerA has more H⁺ ions. A is acidic, B is basic.
Ask about this question
Q2
Section 2.3, Intext question 2
What effect does the concentration of H⁺(aq) ions have on the nature of the solution?
Tests: Connecting H⁺ concentration to acidity and pH.
Show solution
The higher the H⁺ concentration, the more acidic the solution and the lower its pH. As H⁺ concentration falls, the solution becomes less acidic, then neutral, then basic.
AnswerMore H⁺ ions make the solution more acidic (lower pH); fewer make it less acidic or basic.
Ask about this question
Q3
Section 2.3, Intext question 3
Do basic solutions also have H⁺(aq) ions? If yes, then why are these basic?
Tests: Explaining that basicity depends on which ion is in excess.
Show solution
Yes. Every aqueous solution has some H⁺ ions from water. A basic solution is basic because its OH⁻ ion concentration is greater than its H⁺ ion concentration.
AnswerYes; they are basic because OH⁻ ions outnumber H⁺ ions.
Ask about this question
Q4
Section 2.3, Intext question 4
Under what soil condition do you think a farmer would treat the soil of his fields with quick lime (calcium oxide) or slaked lime (calcium hydroxide) or chalk (calcium carbonate)?
Tests: Using neutralisation to correct soil pH.
Show solution
Quick lime, slaked lime and chalk are basic. They are added when the soil is too acidic, to neutralise the excess acid.
AnswerWhen the soil is acidic.
Ask about this question
In-text questions: more about salts (after 2.4)
Q1
Section 2.4, Intext question 1
What is the common name of the compound CaOCl₂?
Tests: Naming chemicals made from common salt and lime.
Show solution
CaOCl₂ is calcium oxychloride, commonly called bleaching powder.
AnswerBleaching powder
Ask about this question
Q2
Section 2.4, Intext question 2
Name the substance which on treatment with chlorine yields bleaching powder.
Tests: Recalling the preparation of bleaching powder.
What will happen if a solution of sodium hydrogencarbonate is heated? Give the equation of the reaction involved.
Tests: Writing the decomposition of baking soda on heating.
Show solution
It decomposes, giving sodium carbonate, water and carbon dioxide: 2NaHCO3(s)heatNa2CO3(s)+H2O(l)+CO2(g).
Answer2NaHCO3(s)heatNa2CO3(s)+H2O(l)+CO2(g)
Ask about this question
Q5
Section 2.4, Intext question 5
Write an equation to show the reaction between Plaster of Paris and water.
Tests: Writing the setting of Plaster of Paris into gypsum.
Show solution
Plaster of Paris is CaSO₄·½H₂O. With water it sets into gypsum, CaSO₄·2H₂O: CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O.
Written for two formula units, so every coefficient is whole: (CaSO4)2⋅H2O(s)+3H2O(l)→2CaSO4⋅2H2O(s).
AnswerCaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O, that is (CaSO4)2⋅H2O(s)+3H2O(l)→2CaSO4⋅2H2O(s)
Ask about this question
Exercises (end of chapter)
Q1
Chapter 2 exercise, Question 1
A solution turns red litmus blue, its pH is likely to be (a) 1 (b) 4 (c) 5 (d) 10.
Tests: Linking an indicator result to a pH value.
Show solution
Red litmus turns blue in a base. A base has pH greater than 7, and the only option above 7 is 10.
Answer(d) 10
Ask about this question
Q2
Chapter 2 exercise, Question 2
A solution reacts with crushed egg-shells to give a gas that turns lime-water milky. The solution contains (a) NaCl (b) HCl (c) LiCl (d) KCl.
Tests: Recognising an acid from its reaction with a carbonate.
Show solution
Egg-shells are calcium carbonate. Only an acid releases CO₂ from it, and CO₂ turns lime water milky: CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g).
Answer(b) HCl
Ask about this question
Q3
Chapter 2 exercise, Question 3
10 mL of a solution of NaOH is found to be completely neutralised by 8 mL of a given solution of HCl. If we take 20 mL of the same solution of NaOH, the amount of HCl solution (the same solution as before) required to neutralise it will be (a) 4 mL (b) 8 mL (c) 12 mL (d) 16 mL.
Tests: Using proportion in a neutralisation.
Show solution
Twice the NaOH (20 mL instead of 10 mL) needs twice the HCl: 2×8=16 mL.
Answer(d) 16 mL
Ask about this question
Q4
Chapter 2 exercise, Question 4
Which one of the following types of medicines is used for treating indigestion? (a) Antibiotic (b) Analgesic (c) Antacid (d) Antiseptic.
Tests: Linking antacids to neutralising excess stomach acid.
Show solution
Indigestion comes from excess acid in the stomach. An antacid, a mild base such as magnesium hydroxide, neutralises it.
Answer(c) Antacid
Ask about this question
Q5
Chapter 2 exercise, Question 5
Write word equations and then balanced equations for the reaction taking place when
(a)
dilute sulphuric acid reacts with zinc granules.
(b)
dilute hydrochloric acid reacts with magnesium ribbon.
(c)
dilute sulphuric acid reacts with aluminium powder.
(d)
dilute hydrochloric acid reacts with iron filings.
Tests: Writing balanced equations for metals with dilute acids.
Show solution
(a)dilute sulphuric acid reacts with zinc granules.
Zinc + sulphuric acid → zinc sulphate + hydrogen
Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g)
AnswerZn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g)
(b)dilute hydrochloric acid reacts with magnesium ribbon.
(d)dilute hydrochloric acid reacts with iron filings.
Iron + hydrochloric acid → iron(II) chloride + hydrogen
Fe(s)+2HCl(aq)→FeCl2(aq)+H2(g)
AnswerFe(s)+2HCl(aq)→FeCl2(aq)+H2(g)
Ask about this question
Q6
Chapter 2 exercise, Question 6
Compounds such as alcohols and glucose also contain hydrogen but are not categorised as acids. Describe an activity to prove it.
Tests: Designing a conduction test that shows which solutions release ions.
Show solution
Fix two nails on a rubber cork in a beaker, and connect them through a bulb and a switch to a 6 V battery.
Pour dilute HCl into the beaker and switch on: the bulb glows. Repeat with dilute H₂SO₄: it glows.
Repeat with glucose solution and alcohol solution: the bulb does not glow.
So acids give ions (H⁺) in solution and conduct; glucose and alcohol do not give H⁺ ions, so they are not acids even though they contain hydrogen.
AnswerThe bulb glows with acid solutions but not with glucose or alcohol solutions, so only acids release H⁺ ions.
Ask about this question
Q7
Chapter 2 exercise, Question 7
Why does distilled water not conduct electricity, whereas rain water does?
Tests: Explaining conduction by dissolved ions.
Show solution
Distilled water has almost no ions. Rain water dissolves gases such as carbon dioxide from the air, forming carbonic acid, which gives ions in solution; these ions conduct electricity.
AnswerRain water has dissolved acidic gases that give ions; distilled water has almost none.
Ask about this question
Q8
Chapter 2 exercise, Question 8
Why do acids not show acidic behaviour in the absence of water?
Tests: Recognising that acids need water to release H⁺ ions.
Show solution
Acidic behaviour comes from H⁺ ions, and an acid releases H⁺ ions only when it dissolves in water. Without water, no H⁺ ions form.
AnswerH⁺ ions, the cause of acidic behaviour, form only in water.
Ask about this question
Q9
Chapter 2 exercise, Question 9
Five solutions A, B, C, D and E when tested with universal indicator showed pH as 4, 1, 11, 7 and 9, respectively. Which solution is
(a)
neutral?
(b)
strongly alkaline?
(c)
strongly acidic?
(d)
weakly acidic?
(e)
weakly alkaline?
(f)
Arrange the pH in increasing order of hydrogen-ion concentration.
Tests: Classifying solutions by pH and ordering them by H⁺ concentration.
Show solution
(a)neutral?
pH 7 is neutral: D.
AnswerD
(b)strongly alkaline?
Highest pH, 11: C.
AnswerC
(c)strongly acidic?
Lowest pH, 1: B.
AnswerB
(d)weakly acidic?
Below 7 but close to it, 4: A.
AnswerA
(e)weakly alkaline?
Above 7 but close to it, 9: E.
AnswerE
(f)Arrange the pH in increasing order of hydrogen-ion concentration.
The higher the pH, the lower the H⁺ concentration. So go from the highest pH to the lowest: 11, 9, 7, 4, 1.
AnswerC (11) < E (9) < D (7) < A (4) < B (1)
Ask about this question
Q10
Chapter 2 exercise, Question 10
Equal lengths of magnesium ribbons are taken in test tubes A and B. Hydrochloric acid (HCl) is added to test tube A, while acetic acid (CH₃COOH) is added to test tube B. Amount and concentration taken for both the acids are same. In which test tube will the fizzing occur more vigorously and why?
Tests: Comparing strong and weak acids by their reactions.
Show solution
HCl is a strong acid: it ionises almost completely, giving many H⁺ ions. Acetic acid is weak and ionises only partly.
So the reaction with magnesium is faster in A: Mg(s)+2HCl(aq)→MgCl2(aq)+H2(g).
AnswerIn A, because HCl is a strong acid and gives far more H⁺ ions than acetic acid.
Ask about this question
Q11
Chapter 2 exercise, Question 11
Fresh milk has a pH of 6. How do you think the pH will change as it turns into curd? Explain your answer.
Tests: Predicting a pH change from acid formation.
Show solution
As milk turns into curd, lactic acid forms. The solution becomes more acidic, so the pH decreases (below 6).
AnswerThe pH decreases, because lactic acid forms.
Ask about this question
Q12
Chapter 2 exercise, Question 12
A milkman adds a very small amount of baking soda to fresh milk.
(a)
Why does he shift the pH of the fresh milk from 6 to slightly alkaline?
(b)
Why does this milk take a long time to set as curd?
Tests: Explaining a practical use of a mild base.
Show solution
(a)Why does he shift the pH of the fresh milk from 6 to slightly alkaline?
A slightly alkaline milk resists turning sour: the base neutralises the lactic acid that forms, so the milk keeps longer.
AnswerSo that it does not turn sour quickly; the base neutralises acid as it forms.
(b)Why does this milk take a long time to set as curd?
The lactic acid made while setting first goes into neutralising the baking soda. Only after that can the milk become acidic enough to set, so it takes longer.
AnswerThe acid formed is first used up neutralising the baking soda.
Ask about this question
Q13
Chapter 2 exercise, Question 13
Plaster of Paris should be stored in a moisture-proof container. Explain why.
Tests: Explaining storage from the reaction of Plaster of Paris with water.
Show solution
Plaster of Paris absorbs moisture and sets into hard gypsum: (CaSO4)2⋅H2O(s)+3H2O(l)→2CaSO4⋅2H2O(s). Once set, it cannot be used for casts or moulds.
AnswerMoisture turns it into hard gypsum, so it would be useless.
Ask about this question
Q14
Chapter 2 exercise, Question 14
What is a neutralisation reaction? Give two examples.
Tests: Defining neutralisation with balanced examples.
Show solution
An acid reacts with a base to give a salt and water: neutralisation.
NaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l) and Ca(OH)2(aq)+H2SO4(aq)→CaSO4(aq)+2H2O(l).
AnswerAcid + base → salt + water.
Ask about this question
Q15
Chapter 2 exercise, Question 15
Give two important uses of washing soda and baking soda.
Tests: Recalling the uses of two sodium compounds.
Show solution
Washing soda (Na₂CO₃·10H₂O): removes permanent hardness of water; used in glass, soap and paper industries and as a cleaning agent.
Baking soda (NaHCO₃): in baking powder, to make cakes soft and spongy; as an antacid; in soda-acid fire extinguishers.
AnswerWashing soda: softening hard water, cleaning (and glass, soap, paper industries). Baking soda: baking powder, antacid (and fire extinguishers).
Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.
Check yourself on this chapter
Practise with fresh questions at your level, free: 10 questions a day with an account.