AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

NCERT Solutions for Class 10 Science Chapter 3: Metals and Non-metals

Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 3. Every equation is balanced and checked. On the reactions and bonding questions you can also try a similar question from our verified question bank.

These are complete NCERT question answers for Class 10 Science Chapter 3, Metals and Non-metals: all the intext questions and end-of-chapter exercise questions. Each one is an ideal answer written the way the CBSE marking scheme gives step marks: the rule or formula, the working, and the final answer stated clearly.

Key ideas
  • Reactivity series (most to least): K, Na, Ca, Mg, Al, Zn, Fe, Pb, H, Cu, Hg, Ag, Au. A metal displaces only a metal below it.
  • Metals above hydrogen give hydrogen gas with dilute acids; metals below hydrogen do not.
  • Metal oxides are basic (Al₂O₃ and ZnO are amphoteric); non-metal oxides are acidic or neutral.
  • Ionic compounds form by electron transfer, and have high melting points; they conduct when molten or dissolved.
  • Extraction: concentrate the ore, convert to oxide (roasting or calcination), reduce, then refine. Rusting needs air and water.

In-text questions: physical properties (after 3.1)

Q1

Section 3.1, Intext question 1

Give an example of a metal which
  1. (i)
    is a liquid at room temperature.
  2. (ii)
    can be easily cut with a knife.
  3. (iii)
    is the best conductor of heat.
  4. (iv)
    is a poor conductor of heat.

Tests: Naming the metals that are exceptions to the usual physical properties.

Show solution

(i) is a liquid at room temperature.

  1. Mercury is the only metal that is liquid at room temperature.
AnswerMercury

(ii) can be easily cut with a knife.

  1. Sodium (also lithium and potassium) is so soft it can be cut with a knife.
AnswerSodium

(iii) is the best conductor of heat.

  1. Silver is the best conductor of heat, followed by copper.
AnswerSilver

(iv) is a poor conductor of heat.

  1. Lead and mercury are comparatively poor conductors of heat.
AnswerLead (or mercury)
Ask about this question
Q2

Section 3.1, Intext question 2

Explain the meanings of malleable and ductile.

Tests: Defining malleability and ductility with examples.

Show solution
  1. Malleable: can be beaten into thin sheets without breaking. Gold and silver are the most malleable metals.
  2. Ductile: can be drawn into thin wires. Gold is the most ductile; one gram of gold can be drawn into a wire about 2 km long.
AnswerMalleable: can be beaten into thin sheets. Ductile: can be drawn into thin wires.
Ask about this question

In-text questions: chemical properties of metals (after 3.2)

Q1

Section 3.2, Intext question 1

Why is sodium kept immersed in kerosene oil?

Tests: Explaining storage of highly reactive metals from their reactions with air and water.

Show solution
  1. Sodium reacts vigorously with oxygen in air, 4Na (s)+O2 (g)→2Na2O (s)4\mathrm{Na}\,\text{(s)} + \mathrm{O_{2}}\,\text{(g)} \rightarrow 2\mathrm{Na_{2}O}\,\text{(s)}, and violently with water, 2Na (s)+2H2O (l)→2NaOH (aq)+H2 (g)2\mathrm{Na}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{NaOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. The heat can set the hydrogen on fire.
  2. Sodium does not react with kerosene, and kerosene keeps air and moisture away from it.
AnswerSodium reacts so vigorously with air and water that it can catch fire; kerosene keeps air and moisture away from it.
Ask about this question
Q2

Section 3.2, Intext question 2

Write equations for the reactions of
  1. (i)
    iron with steam
  2. (ii)
    calcium and potassium with water

Tests: Writing balanced equations for reactions of metals with water and steam.

Show solution

(i) iron with steam

  1. 3Fe (s)+4H2O (g)→Fe3O4 (s)+4H2 (g)3\mathrm{Fe}\,\text{(s)} + 4\mathrm{H_{2}O}\,\text{(g)} \rightarrow \mathrm{Fe_{3}O_{4}}\,\text{(s)} + 4\mathrm{H_{2}}\,\text{(g)}
Answer3Fe (s)+4H2O (g)→Fe3O4 (s)+4H2 (g)3\mathrm{Fe}\,\text{(s)} + 4\mathrm{H_{2}O}\,\text{(g)} \rightarrow \mathrm{Fe_{3}O_{4}}\,\text{(s)} + 4\mathrm{H_{2}}\,\text{(g)}

(ii) calcium and potassium with water

  1. Calcium: Ca (s)+2H2O (l)→Ca(OH)2 (aq)+H2 (g)\mathrm{Ca}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow \mathrm{Ca(OH)_{2}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. Less violent; the calcium floats as bubbles of hydrogen stick to it.
  2. Potassium: 2K (s)+2H2O (l)→2KOH (aq)+H2 (g)2\mathrm{K}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{KOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. So vigorous that the hydrogen catches fire.
AnswerCa (s)+2H2O (l)→Ca(OH)2 (aq)+H2 (g)\mathrm{Ca}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow \mathrm{Ca(OH)_{2}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)} and 2K (s)+2H2O (l)→2KOH (aq)+H2 (g)2\mathrm{K}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{KOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
Ask about this question
Q3

Section 3.2, Intext question 3

Samples of four metals A, B, C and D were added one by one to the following solutions. The results:
• A: no reaction with iron(II) sulphate; displaces copper from copper(II) sulphate.
• B: displaces iron from iron(II) sulphate; no reaction with zinc sulphate.
• C: no reaction with iron(II) sulphate, copper(II) sulphate or zinc sulphate; displaces silver from silver nitrate.
• D: no reaction with any of the four solutions.
  1. (i)
    Which is the most reactive metal?
  2. (ii)
    What would you observe if B is added to a solution of copper(II) sulphate?
  3. (iii)
    Arrange the metals A, B, C and D in order of decreasing reactivity.

Tests: Using displacement results to place metals in the reactivity series.

Show solution

(i) Which is the most reactive metal?

  1. A displaces copper but not iron: iron > A > copper.
  2. B displaces iron but not zinc: zinc > B > iron. So B is above A.
  3. C displaces only silver: copper > C > silver. D displaces nothing, not even silver: D is below silver.
AnswerB

(ii) What would you observe if B is added to a solution of copper(II) sulphate?

  1. B is more reactive than iron, which is more reactive than copper, so B displaces copper. The blue colour fades and reddish-brown copper deposits on B.
AnswerThe blue solution fades and a reddish-brown layer of copper forms on B.

(iii) Arrange the metals A, B, C and D in order of decreasing reactivity.

  1. From (i): zinc > B > iron > A > copper > C > silver > D.
AnswerB > A > C > D
Ask about this question
Q4

Section 3.2, Intext question 4

Which gas is produced when dilute hydrochloric acid is added to a reactive metal? Write the chemical reaction when iron reacts with dilute H₂SO₄.

Tests: Predicting the products of a metal with a dilute acid.

Show solution
  1. A reactive metal displaces hydrogen from the acid, so hydrogen gas is produced. It burns with a pop sound.
  2. Fe (s)+H2SO4 (aq)→FeSO4 (aq)+H2 (g)\mathrm{Fe}\,\text{(s)} + \mathrm{H_{2}SO_{4}}\,\text{(aq)} \rightarrow \mathrm{FeSO_{4}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
AnswerHydrogen. Fe (s)+H2SO4 (aq)→FeSO4 (aq)+H2 (g)\mathrm{Fe}\,\text{(s)} + \mathrm{H_{2}SO_{4}}\,\text{(aq)} \rightarrow \mathrm{FeSO_{4}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
Ask about this question
Q5

Section 3.2, Intext question 5

What would you observe when zinc is added to a solution of iron(II) sulphate? Write the chemical reaction that takes place.

Tests: Predicting a displacement reaction from the reactivity series and describing what you see.

Show solution
  1. Zinc is more reactive than iron, so it displaces iron from iron(II) sulphate.
  2. Zn (s)+FeSO4 (aq)→ZnSO4 (aq)+Fe (s)\mathrm{Zn}\,\text{(s)} + \mathrm{FeSO_{4}}\,\text{(aq)} \rightarrow \mathrm{ZnSO_{4}}\,\text{(aq)} + \mathrm{Fe}\,\text{(s)}
  3. The pale green solution becomes colourless (zinc sulphate), and dark grey iron deposits on the zinc.
AnswerThe pale green colour fades and iron is deposited. Zn (s)+FeSO4 (aq)→ZnSO4 (aq)+Fe (s)\mathrm{Zn}\,\text{(s)} + \mathrm{FeSO_{4}}\,\text{(aq)} \rightarrow \mathrm{ZnSO_{4}}\,\text{(aq)} + \mathrm{Fe}\,\text{(s)}
Ask about this question

In-text questions: how metals and non-metals react (after 3.3)

Q1

Section 3.3, Intext question 1

Answer the following.
  1. (i)
    Write the electron-dot structures for sodium, oxygen and magnesium.
  2. (ii)
    Show the formation of Na₂O and MgO by the transfer of electrons.
  3. (iii)
    What are the ions present in these compounds?

Tests: Showing ionic bond formation by electron transfer with electron-dot structures.

Show solution

(i) Write the electron-dot structures for sodium, oxygen and magnesium.

  1. Sodium (2,8,1): one dot, Na•
  2. Oxygen (2,6): six dots around O
  3. Magnesium (2,8,2): two dots, •Mg•
AnswerNa with 1 dot, O with 6 dots, Mg with 2 dots (one dot for each outer-shell electron).

(ii) Show the formation of Na₂O and MgO by the transfer of electrons.

  1. Na₂O: each of two sodium atoms gives its one outer electron to an oxygen atom, which needs two: 2Na+O→2Na++O2−2\mathrm{Na} + \mathrm{O} \rightarrow 2\mathrm{Na^{+}} + \mathrm{O^{2-}}, so (Na+)2O2−(\mathrm{Na^{+}})_2\mathrm{O^{2-}}.
  2. MgO: magnesium gives both its outer electrons to one oxygen atom: Mg+O→Mg2++O2−\mathrm{Mg} + \mathrm{O} \rightarrow \mathrm{Mg^{2+}} + \mathrm{O^{2-}}, so Mg2+O2−\mathrm{Mg^{2+}O^{2-}}.
AnswerNa₂O: 2 Na → 2 Na⁺ + 2e⁻, O + 2e⁻ → O²⁻. MgO: Mg → Mg²⁺ + 2e⁻, O + 2e⁻ → O²⁻.

(iii) What are the ions present in these compounds?

  1. Na₂O has sodium ions and oxide ions; MgO has magnesium ions and oxide ions.
AnswerNa₂O: Na⁺ and O²⁻. MgO: Mg²⁺ and O²⁻.
Ask about this question
Q2

Section 3.3, Intext question 2

Why do ionic compounds have high melting points?

Tests: Explaining the properties of ionic compounds from the forces between ions.

Show solution
  1. In an ionic solid, oppositely charged ions are held together by strong electrostatic forces of attraction.
  2. A large amount of energy is needed to overcome these forces, so the melting point is high.
AnswerThere are strong forces of attraction between the oppositely charged ions, and a lot of energy is needed to break them.
Ask about this question

In-text questions: occurrence and extraction of metals (after 3.4)

Q1

Section 3.4, Intext question 1

Define the following terms.
  1. (i)
    Mineral
  2. (ii)
    Ore
  3. (iii)
    Gangue

Tests: Distinguishing minerals, ores and gangue.

Show solution

(i) Mineral

  1. A naturally occurring element or compound found in the earth's crust.
AnswerAn element or compound occurring naturally in the earth's crust.

(ii) Ore

  1. A mineral that contains a high enough percentage of a metal for the metal to be extracted from it profitably.
AnswerA mineral from which a metal can be extracted profitably.

(iii) Gangue

  1. Impurities such as soil and sand mixed with the ore when it is mined.
AnswerEarthy impurities (soil, sand) in an ore.
Ask about this question
Q2

Section 3.4, Intext question 2

Name two metals which are found in nature in the free state.

Tests: Linking a metal's reactivity to how it occurs in nature.

Show solution
  1. Metals low in the reactivity series, such as gold and platinum (also silver, sometimes copper), do not react easily, so they are found free.
AnswerGold and platinum
Ask about this question
Q3

Section 3.4, Intext question 3

Which chemical process is used for obtaining a metal from its oxide?

Tests: Naming the process that turns a metal oxide into a metal.

Show solution
  1. Reduction: the oxide loses oxygen, for example with carbon: ZnO (s)+C (s)→Zn (s)+CO (g)\mathrm{ZnO}\,\text{(s)} + \mathrm{C}\,\text{(s)} \rightarrow \mathrm{Zn}\,\text{(s)} + \mathrm{CO}\,\text{(g)}.
AnswerReduction
Ask about this question

In-text questions: corrosion (after 3.5)

Q1

Section 3.5, Intext question 1

Metallic oxides of zinc, magnesium and copper were heated with the metals zinc, magnesium and copper (each oxide with each metal). In which cases will you find displacement reactions taking place?

Tests: Using the reactivity series to predict which metal can reduce which oxide.

Show solution
  1. Reactivity: magnesium > zinc > copper. A metal displaces another only from the oxide of a less reactive metal.
  2. Zinc with copper oxide: Zn (s)+CuO (s)→ZnO (s)+Cu (s)\mathrm{Zn}\,\text{(s)} + \mathrm{CuO}\,\text{(s)} \rightarrow \mathrm{ZnO}\,\text{(s)} + \mathrm{Cu}\,\text{(s)}.
  3. Magnesium with zinc oxide: Mg (s)+ZnO (s)→MgO (s)+Zn (s)\mathrm{Mg}\,\text{(s)} + \mathrm{ZnO}\,\text{(s)} \rightarrow \mathrm{MgO}\,\text{(s)} + \mathrm{Zn}\,\text{(s)}.
  4. Magnesium with copper oxide: Mg (s)+CuO (s)→MgO (s)+Cu (s)\mathrm{Mg}\,\text{(s)} + \mathrm{CuO}\,\text{(s)} \rightarrow \mathrm{MgO}\,\text{(s)} + \mathrm{Cu}\,\text{(s)}.
AnswerZinc + copper oxide, magnesium + zinc oxide, and magnesium + copper oxide.
Ask about this question
Q2

Section 3.5, Intext question 2

Which metals do not corrode easily?

Tests: Linking resistance to corrosion with low reactivity.

Show solution
  1. Metals at the bottom of the reactivity series, such as gold and platinum, do not react with air or moisture, so they do not corrode easily.
AnswerLess reactive metals such as gold and platinum.
Ask about this question
Q3

Section 3.5, Intext question 3

What are alloys?

Tests: Defining an alloy with examples.

Show solution
  1. An alloy is a homogeneous mixture of two or more metals, or of a metal and a non-metal.
  2. Examples: brass (copper and zinc), bronze (copper and tin), solder (lead and tin), steel (iron and carbon).
AnswerA homogeneous mixture of two or more metals, or a metal and a non-metal, such as brass or steel.
Ask about this question

Exercises (end of chapter)

Q1

Chapter 3 exercise, Question 1

Which of the following pairs will give displacement reactions?
(a) NaCl solution and copper metal (b) MgCl₂ solution and aluminium metal (c) FeSO₄ solution and silver metal (d) AgNO₃ solution and copper metal

Tests: Predicting displacement from the reactivity series.

Show solution
  1. A metal displaces only a less reactive metal from its salt. Copper is below sodium, aluminium is below magnesium and silver is below iron, so (a), (b) and (c) do not react. Copper is above silver.
  2. So only (d) reacts: Cu (s)+2AgNO3 (aq)→Cu(NO3)2 (aq)+2Ag (s)\mathrm{Cu}\,\text{(s)} + 2\mathrm{AgNO_{3}}\,\text{(aq)} \rightarrow \mathrm{Cu(NO_{3})_{2}}\,\text{(aq)} + 2\mathrm{Ag}\,\text{(s)}.
Answer(d) AgNO₃ solution and copper metal
Ask about this question
Q2

Chapter 3 exercise, Question 2

Which of the following methods is suitable for preventing an iron frying pan from rusting?
(a) Applying grease (b) Applying paint (c) Applying a coating of zinc (d) All of the above

Tests: Choosing a rust-prevention method that suits how the object is used.

Show solution
  1. A frying pan is heated and touches food, so grease and paint are unsuitable. A zinc coating (galvanisation) protects it.
Answer(c) Applying a coating of zinc
Ask about this question
Q3

Chapter 3 exercise, Question 3

An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be (a) calcium (b) carbon (c) silicon (d) iron.

Tests: Identifying an element from the properties of its oxide.

Show solution
  1. Calcium forms calcium oxide, CaO\mathrm{CaO}, an ionic compound: high melting point and it dissolves in water (forming calcium hydroxide). Carbon and silicon form covalent oxides; iron oxide does not dissolve.
Answer(a) calcium
Ask about this question
Q4

Chapter 3 exercise, Question 4

Food cans are coated with tin and not with zinc because (a) zinc is costlier than tin (b) zinc has a higher melting point than tin (c) zinc is more reactive than tin (d) zinc is less reactive than tin.

Tests: Using the reactivity series to explain a practical choice.

Show solution
  1. Zinc is more reactive than tin, so it would react with acids in the food and form harmful compounds. Tin is less reactive.
Answer(c) zinc is more reactive than tin
Ask about this question
Q5

Chapter 3 exercise, Question 5

You are given a hammer, a battery, a bulb, wires and a switch.
  1. (a)
    How could you use them to distinguish between samples of metals and non-metals?
  2. (b)
    Assess the usefulness of these tests in distinguishing between metals and non-metals.

Tests: Designing simple tests that tell metals from non-metals, and judging their limits.

Show solution

(a) How could you use them to distinguish between samples of metals and non-metals?

  1. Hammer: beat each sample. A metal flattens into a sheet (malleable); a non-metal breaks into pieces (brittle).
  2. Circuit: connect the sample between the wires with the battery, bulb and switch. If the bulb glows, the sample conducts: it is a metal.
AnswerMetals flatten when hammered and make the bulb glow in the circuit; non-metals break and do not conduct.

(b) Assess the usefulness of these tests in distinguishing between metals and non-metals.

  1. The tests work for most samples, but there are exceptions: graphite (a non-metal) conducts electricity, and very soft metals like sodium cannot be tested reliably with a hammer. So the tests are useful but not conclusive alone.
AnswerUseful for most elements, but not conclusive: graphite conducts electricity, and some metals behave unusually.
Ask about this question
Q6

Chapter 3 exercise, Question 6

What are amphoteric oxides? Give two examples of amphoteric oxides.

Tests: Recognising oxides that react with both acids and bases.

Show solution
  1. Amphoteric oxides react with both acids and bases to give salt and water.
  2. Al2O3+6HCl→2AlCl3+3H2O\mathrm{Al_{2}O_{3}} + 6\mathrm{HCl} \rightarrow 2\mathrm{AlCl_{3}} + 3\mathrm{H_{2}O} (with acid) and Al2O3+2NaOH→2NaAlO2+H2O\mathrm{Al_{2}O_{3}} + 2\mathrm{NaOH} \rightarrow 2\mathrm{NaAlO_{2}} + \mathrm{H_{2}O} (with base, forming sodium aluminate).
AnswerMetal oxides that react with both acids and bases to form salt and water. Examples: aluminium oxide (Al₂O₃) and zinc oxide (ZnO).
Ask about this question
Q7

Chapter 3 exercise, Question 7

Name two metals which will displace hydrogen from dilute acids, and two metals which will not.

Tests: Using the position of hydrogen in the reactivity series.

Show solution
  1. Metals above hydrogen in the reactivity series displace it, e.g. zinc and magnesium: Zn (s)+2HCl (aq)→ZnCl2 (aq)+H2 (g)\mathrm{Zn}\,\text{(s)} + 2\mathrm{HCl}\,\text{(aq)} \rightarrow \mathrm{ZnCl_{2}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}.
  2. Metals below hydrogen, such as copper and silver, do not.
AnswerWill: zinc and magnesium. Will not: copper and silver.
Ask about this question
Q8

Chapter 3 exercise, Question 8

In the electrolytic refining of a metal M, what would you take as the anode, the cathode and the electrolyte?

Tests: Naming the parts of an electrolytic refining cell.

Show solution
  1. Anode: a thick block of impure metal M.
  2. Cathode: a thin strip of pure metal M.
  3. Electrolyte: a solution of a soluble salt of M (for copper, acidified copper sulphate).
AnswerAnode: impure M. Cathode: thin strip of pure M. Electrolyte: solution of a salt of M.
Ask about this question
Q9

Chapter 3 exercise, Question 9

Pratyush heated sulphur powder on a spatula and collected the gas evolved in a test tube.
  1. (a)(i)
    What will be the action of the gas on dry litmus paper?
  2. (a)(ii)
    What will be the action of the gas on moist litmus paper?
  3. (b)
    Write a balanced chemical equation for the reaction taking place.

Tests: Predicting the nature of a non-metal oxide.

Show solution

(a)(i) What will be the action of the gas on dry litmus paper?

  1. Sulphur dioxide shows acidic behaviour only in water. On dry litmus there is no change.
AnswerNo change.

(a)(ii) What will be the action of the gas on moist litmus paper?

  1. With water it forms sulphurous acid, SO2 (g)+H2O (l)→H2SO3 (aq)\mathrm{SO_{2}}\,\text{(g)} + \mathrm{H_{2}O}\,\text{(l)} \rightarrow \mathrm{H_{2}SO_{3}}\,\text{(aq)}, which turns moist blue litmus red.
AnswerMoist blue litmus turns red.

(b) Write a balanced chemical equation for the reaction taking place.

  1. S (s)+O2 (g)→SO2 (g)\mathrm{S}\,\text{(s)} + \mathrm{O_{2}}\,\text{(g)} \rightarrow \mathrm{SO_{2}}\,\text{(g)}
AnswerS (s)+O2 (g)→SO2 (g)\mathrm{S}\,\text{(s)} + \mathrm{O_{2}}\,\text{(g)} \rightarrow \mathrm{SO_{2}}\,\text{(g)}
Ask about this question
Q10

Chapter 3 exercise, Question 10

State two ways to prevent the rusting of iron.

Tests: Naming ways to prevent rusting.

Show solution
  1. Any two: painting, oiling or greasing, galvanising (coating with zinc), chrome plating, anodising, or making alloys such as stainless steel.
AnswerPainting and galvanising (also oiling, greasing, alloying).
Ask about this question
Q11

Chapter 3 exercise, Question 11

What type of oxides are formed when non-metals combine with oxygen?

Tests: Classifying non-metal oxides as acidic or neutral.

Show solution
  1. Non-metals form acidic oxides (for example CO2\mathrm{CO_{2}}, SO2\mathrm{SO_{2}}), and a few form neutral oxides (CO\mathrm{CO}, H2O\mathrm{H_{2}O}).
AnswerAcidic oxides (some are neutral, like CO and H₂O).
Ask about this question
Q12

Chapter 3 exercise, Question 12

Give reasons.
  1. (a)
    Platinum, gold and silver are used to make jewellery.
  2. (b)
    Sodium, potassium and lithium are stored under oil.
  3. (c)
    Aluminium is a highly reactive metal, yet it is used to make utensils for cooking.
  4. (d)
    Carbonate and sulphide ores are usually converted into oxides during extraction.

Tests: Explaining uses and processes from the properties of metals.

Show solution

(a) Platinum, gold and silver are used to make jewellery.

  1. They are lustrous, malleable and ductile, and so unreactive that they do not corrode or tarnish easily.
AnswerThey are shiny, can be shaped, and do not corrode.

(b) Sodium, potassium and lithium are stored under oil.

  1. They are so reactive that they catch fire in air and react violently with water; oil keeps air and moisture away.
AnswerThey react violently with air and water; oil keeps both away.

(c) Aluminium is a highly reactive metal, yet it is used to make utensils for cooking.

  1. Aluminium quickly forms a thin, tough layer of aluminium oxide that stops further reaction. It is also light and a good conductor of heat.
AnswerA protective oxide layer stops further reaction, and it conducts heat well.

(d) Carbonate and sulphide ores are usually converted into oxides during extraction.

  1. It is easier to get a metal from its oxide (by reduction) than from a carbonate or sulphide.
  2. Calcination: ZnCO3 (s)→heatZnO (s)+CO2 (g)\mathrm{ZnCO_{3}}\,\text{(s)} \xrightarrow{\text{heat}} \mathrm{ZnO}\,\text{(s)} + \mathrm{CO_{2}}\,\text{(g)}. Roasting: 2ZnS (s)+3O2 (g)→heat2ZnO (s)+2SO2 (g)2\mathrm{ZnS}\,\text{(s)} + 3\mathrm{O_{2}}\,\text{(g)} \xrightarrow{\text{heat}} 2\mathrm{ZnO}\,\text{(s)} + 2\mathrm{SO_{2}}\,\text{(g)}.
AnswerMetals are easier to obtain from oxides by reduction, so ores are first changed to oxides.
Ask about this question
Q13

Chapter 3 exercise, Question 13

Tarnished copper vessels are cleaned with lemon or tamarind juice. Explain why these sour substances are effective.

Tests: Explaining tarnish removal as an acid-base reaction.

Show solution
  1. Copper slowly reacts with moist carbon dioxide in air to form a green coating of basic copper carbonate.
  2. Lemon and tamarind contain acids, which react with this basic coating and dissolve it, leaving the vessel shiny.
AnswerThe acid in the juice dissolves the basic copper carbonate coating.
Ask about this question
Q14

Chapter 3 exercise, Question 14

Differentiate between metals and non-metals on the basis of their chemical properties.

Tests: Comparing the chemical behaviour of metals and non-metals.

Show solution
  1. Oxides: metals form basic (some amphoteric) oxides; non-metals form acidic or neutral oxides.
  2. Dilute acids: reactive metals displace hydrogen; non-metals do not.
  3. Electrons: metals lose electrons (electropositive); non-metals gain electrons (electronegative).
  4. Chlorides: metals form ionic chlorides; non-metals form covalent chlorides.
AnswerMetals: basic oxides, displace hydrogen from acids, lose electrons, ionic chlorides. Non-metals: acidic or neutral oxides, no hydrogen from acids, gain electrons, covalent chlorides.
Ask about this question
Q15

Chapter 3 exercise, Question 15

A man posing as a goldsmith dipped a lady's dull gold bangles in a particular solution. They sparkled like new, but their weight was reduced drastically. What was the solution?

Tests: Identifying the reagent that dissolves gold.

Show solution
  1. He used aqua regia, a freshly prepared mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio 3 : 1.
  2. It dissolved the outer layer of gold, exposing shiny gold beneath, so the bangles shone but lost weight.
AnswerAqua regia (concentrated HCl and HNO₃, 3 : 1).
Ask about this question
Q16

Chapter 3 exercise, Question 16

Give reasons why copper is used to make hot water tanks and not steel (an alloy of iron).

Tests: Choosing a metal from its reactions with water.

Show solution
  1. Copper does not react with water, even hot water or steam. Iron in steel reacts with steam, 3Fe (s)+4H2O (g)→Fe3O4 (s)+4H2 (g)3\mathrm{Fe}\,\text{(s)} + 4\mathrm{H_{2}O}\,\text{(g)} \rightarrow \mathrm{Fe_{3}O_{4}}\,\text{(s)} + 4\mathrm{H_{2}}\,\text{(g)}, and rusts with moisture and air.
  2. Copper is also a good conductor of heat.
AnswerCopper does not react with hot water or steam; iron does, and corrodes.
Ask about this question

Chapter notes

Check yourself: 5 quick questions on Metals and Non-metals — Part 2

Questions are from the NCERT Class 10 Science textbook, Chapter 3; word problems are paraphrased with every number kept.

Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.

Check yourself on this chapter

Practise with fresh questions at your level, free: 10 questions a day with an account.