AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.

Class 10 Science Chapter 3 Intext Questions and Answers

Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 3. Every equation is balanced and checked. On the reactions and bonding questions you can also try a similar question from our verified question bank.

NCERT solutions for the intext questions of Class 10 Science Chapter 3 Metals and Non-metals: all 15 questions answered step by step, as ideal answers in the CBSE board format. Free, with a doubt chat on every question.

Key ideas
  • Reactivity series (most to least): K, Na, Ca, Mg, Al, Zn, Fe, Pb, H, Cu, Hg, Ag, Au. A metal displaces only a metal below it.
  • Metals above hydrogen give hydrogen gas with dilute acids; metals below hydrogen do not.
  • Metal oxides are basic (Al₂O₃ and ZnO are amphoteric); non-metal oxides are acidic or neutral.
  • Ionic compounds form by electron transfer, and have high melting points; they conduct when molten or dissolved.
  • Extraction: concentrate the ore, convert to oxide (roasting or calcination), reduce, then refine. Rusting needs air and water.

In-text questions: physical properties (after 3.1)

Q1

Section 3.1, Intext question 1

Give an example of a metal which
  1. (i)
    is a liquid at room temperature.
  2. (ii)
    can be easily cut with a knife.
  3. (iii)
    is the best conductor of heat.
  4. (iv)
    is a poor conductor of heat.

Tests: Naming the metals that are exceptions to the usual physical properties.

Show solution

(i) is a liquid at room temperature.

  1. Mercury is the only metal that is liquid at room temperature.
AnswerMercury

(ii) can be easily cut with a knife.

  1. Sodium (also lithium and potassium) is so soft it can be cut with a knife.
AnswerSodium

(iii) is the best conductor of heat.

  1. Silver is the best conductor of heat, followed by copper.
AnswerSilver

(iv) is a poor conductor of heat.

  1. Lead and mercury are comparatively poor conductors of heat.
AnswerLead (or mercury)
Ask about this question
Q2

Section 3.1, Intext question 2

Explain the meanings of malleable and ductile.

Tests: Defining malleability and ductility with examples.

Show solution
  1. Malleable: can be beaten into thin sheets without breaking. Gold and silver are the most malleable metals.
  2. Ductile: can be drawn into thin wires. Gold is the most ductile; one gram of gold can be drawn into a wire about 2 km long.
AnswerMalleable: can be beaten into thin sheets. Ductile: can be drawn into thin wires.
Ask about this question

In-text questions: chemical properties of metals (after 3.2)

Q1

Section 3.2, Intext question 1

Why is sodium kept immersed in kerosene oil?

Tests: Explaining storage of highly reactive metals from their reactions with air and water.

Show solution
  1. Sodium reacts vigorously with oxygen in air, 4Na (s)+O2 (g)→2Na2O (s)4\mathrm{Na}\,\text{(s)} + \mathrm{O_{2}}\,\text{(g)} \rightarrow 2\mathrm{Na_{2}O}\,\text{(s)}, and violently with water, 2Na (s)+2H2O (l)→2NaOH (aq)+H2 (g)2\mathrm{Na}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{NaOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. The heat can set the hydrogen on fire.
  2. Sodium does not react with kerosene, and kerosene keeps air and moisture away from it.
AnswerSodium reacts so vigorously with air and water that it can catch fire; kerosene keeps air and moisture away from it.
Ask about this question
Q2

Section 3.2, Intext question 2

Write equations for the reactions of
  1. (i)
    iron with steam
  2. (ii)
    calcium and potassium with water

Tests: Writing balanced equations for reactions of metals with water and steam.

Show solution

(i) iron with steam

  1. 3Fe (s)+4H2O (g)→Fe3O4 (s)+4H2 (g)3\mathrm{Fe}\,\text{(s)} + 4\mathrm{H_{2}O}\,\text{(g)} \rightarrow \mathrm{Fe_{3}O_{4}}\,\text{(s)} + 4\mathrm{H_{2}}\,\text{(g)}
Answer3Fe (s)+4H2O (g)→Fe3O4 (s)+4H2 (g)3\mathrm{Fe}\,\text{(s)} + 4\mathrm{H_{2}O}\,\text{(g)} \rightarrow \mathrm{Fe_{3}O_{4}}\,\text{(s)} + 4\mathrm{H_{2}}\,\text{(g)}

(ii) calcium and potassium with water

  1. Calcium: Ca (s)+2H2O (l)→Ca(OH)2 (aq)+H2 (g)\mathrm{Ca}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow \mathrm{Ca(OH)_{2}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. Less violent; the calcium floats as bubbles of hydrogen stick to it.
  2. Potassium: 2K (s)+2H2O (l)→2KOH (aq)+H2 (g)2\mathrm{K}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{KOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}. So vigorous that the hydrogen catches fire.
AnswerCa (s)+2H2O (l)→Ca(OH)2 (aq)+H2 (g)\mathrm{Ca}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow \mathrm{Ca(OH)_{2}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)} and 2K (s)+2H2O (l)→2KOH (aq)+H2 (g)2\mathrm{K}\,\text{(s)} + 2\mathrm{H_{2}O}\,\text{(l)} \rightarrow 2\mathrm{KOH}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
Ask about this question
Q3

Section 3.2, Intext question 3

Samples of four metals A, B, C and D were added one by one to the following solutions. The results:
• A: no reaction with iron(II) sulphate; displaces copper from copper(II) sulphate.
• B: displaces iron from iron(II) sulphate; no reaction with zinc sulphate.
• C: no reaction with iron(II) sulphate, copper(II) sulphate or zinc sulphate; displaces silver from silver nitrate.
• D: no reaction with any of the four solutions.
  1. (i)
    Which is the most reactive metal?
  2. (ii)
    What would you observe if B is added to a solution of copper(II) sulphate?
  3. (iii)
    Arrange the metals A, B, C and D in order of decreasing reactivity.

Tests: Using displacement results to place metals in the reactivity series.

Show solution

(i) Which is the most reactive metal?

  1. A displaces copper but not iron: iron > A > copper.
  2. B displaces iron but not zinc: zinc > B > iron. So B is above A.
  3. C displaces only silver: copper > C > silver. D displaces nothing, not even silver: D is below silver.
AnswerB

(ii) What would you observe if B is added to a solution of copper(II) sulphate?

  1. B is more reactive than iron, which is more reactive than copper, so B displaces copper. The blue colour fades and reddish-brown copper deposits on B.
AnswerThe blue solution fades and a reddish-brown layer of copper forms on B.

(iii) Arrange the metals A, B, C and D in order of decreasing reactivity.

  1. From (i): zinc > B > iron > A > copper > C > silver > D.
AnswerB > A > C > D
Ask about this question
Q4

Section 3.2, Intext question 4

Which gas is produced when dilute hydrochloric acid is added to a reactive metal? Write the chemical reaction when iron reacts with dilute H₂SO₄.

Tests: Predicting the products of a metal with a dilute acid.

Show solution
  1. A reactive metal displaces hydrogen from the acid, so hydrogen gas is produced. It burns with a pop sound.
  2. Fe (s)+H2SO4 (aq)→FeSO4 (aq)+H2 (g)\mathrm{Fe}\,\text{(s)} + \mathrm{H_{2}SO_{4}}\,\text{(aq)} \rightarrow \mathrm{FeSO_{4}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
AnswerHydrogen. Fe (s)+H2SO4 (aq)→FeSO4 (aq)+H2 (g)\mathrm{Fe}\,\text{(s)} + \mathrm{H_{2}SO_{4}}\,\text{(aq)} \rightarrow \mathrm{FeSO_{4}}\,\text{(aq)} + \mathrm{H_{2}}\,\text{(g)}
Ask about this question
Q5

Section 3.2, Intext question 5

What would you observe when zinc is added to a solution of iron(II) sulphate? Write the chemical reaction that takes place.

Tests: Predicting a displacement reaction from the reactivity series and describing what you see.

Show solution
  1. Zinc is more reactive than iron, so it displaces iron from iron(II) sulphate.
  2. Zn (s)+FeSO4 (aq)→ZnSO4 (aq)+Fe (s)\mathrm{Zn}\,\text{(s)} + \mathrm{FeSO_{4}}\,\text{(aq)} \rightarrow \mathrm{ZnSO_{4}}\,\text{(aq)} + \mathrm{Fe}\,\text{(s)}
  3. The pale green solution becomes colourless (zinc sulphate), and dark grey iron deposits on the zinc.
AnswerThe pale green colour fades and iron is deposited. Zn (s)+FeSO4 (aq)→ZnSO4 (aq)+Fe (s)\mathrm{Zn}\,\text{(s)} + \mathrm{FeSO_{4}}\,\text{(aq)} \rightarrow \mathrm{ZnSO_{4}}\,\text{(aq)} + \mathrm{Fe}\,\text{(s)}
Ask about this question

In-text questions: how metals and non-metals react (after 3.3)

Q1

Section 3.3, Intext question 1

Answer the following.
  1. (i)
    Write the electron-dot structures for sodium, oxygen and magnesium.
  2. (ii)
    Show the formation of Na₂O and MgO by the transfer of electrons.
  3. (iii)
    What are the ions present in these compounds?

Tests: Showing ionic bond formation by electron transfer with electron-dot structures.

Show solution

(i) Write the electron-dot structures for sodium, oxygen and magnesium.

  1. Sodium (2,8,1): one dot, Na•
  2. Oxygen (2,6): six dots around O
  3. Magnesium (2,8,2): two dots, •Mg•
AnswerNa with 1 dot, O with 6 dots, Mg with 2 dots (one dot for each outer-shell electron).

(ii) Show the formation of Na₂O and MgO by the transfer of electrons.

  1. Na₂O: each of two sodium atoms gives its one outer electron to an oxygen atom, which needs two: 2Na+O→2Na++O2−2\mathrm{Na} + \mathrm{O} \rightarrow 2\mathrm{Na^{+}} + \mathrm{O^{2-}}, so (Na+)2O2−(\mathrm{Na^{+}})_2\mathrm{O^{2-}}.
  2. MgO: magnesium gives both its outer electrons to one oxygen atom: Mg+O→Mg2++O2−\mathrm{Mg} + \mathrm{O} \rightarrow \mathrm{Mg^{2+}} + \mathrm{O^{2-}}, so Mg2+O2−\mathrm{Mg^{2+}O^{2-}}.
AnswerNa₂O: 2 Na → 2 Na⁺ + 2e⁻, O + 2e⁻ → O²⁻. MgO: Mg → Mg²⁺ + 2e⁻, O + 2e⁻ → O²⁻.

(iii) What are the ions present in these compounds?

  1. Na₂O has sodium ions and oxide ions; MgO has magnesium ions and oxide ions.
AnswerNa₂O: Na⁺ and O²⁻. MgO: Mg²⁺ and O²⁻.
Ask about this question
Q2

Section 3.3, Intext question 2

Why do ionic compounds have high melting points?

Tests: Explaining the properties of ionic compounds from the forces between ions.

Show solution
  1. In an ionic solid, oppositely charged ions are held together by strong electrostatic forces of attraction.
  2. A large amount of energy is needed to overcome these forces, so the melting point is high.
AnswerThere are strong forces of attraction between the oppositely charged ions, and a lot of energy is needed to break them.
Ask about this question

In-text questions: occurrence and extraction of metals (after 3.4)

Q1

Section 3.4, Intext question 1

Define the following terms.
  1. (i)
    Mineral
  2. (ii)
    Ore
  3. (iii)
    Gangue

Tests: Distinguishing minerals, ores and gangue.

Show solution

(i) Mineral

  1. A naturally occurring element or compound found in the earth's crust.
AnswerAn element or compound occurring naturally in the earth's crust.

(ii) Ore

  1. A mineral that contains a high enough percentage of a metal for the metal to be extracted from it profitably.
AnswerA mineral from which a metal can be extracted profitably.

(iii) Gangue

  1. Impurities such as soil and sand mixed with the ore when it is mined.
AnswerEarthy impurities (soil, sand) in an ore.
Ask about this question
Q2

Section 3.4, Intext question 2

Name two metals which are found in nature in the free state.

Tests: Linking a metal's reactivity to how it occurs in nature.

Show solution
  1. Metals low in the reactivity series, such as gold and platinum (also silver, sometimes copper), do not react easily, so they are found free.
AnswerGold and platinum
Ask about this question
Q3

Section 3.4, Intext question 3

Which chemical process is used for obtaining a metal from its oxide?

Tests: Naming the process that turns a metal oxide into a metal.

Show solution
  1. Reduction: the oxide loses oxygen, for example with carbon: ZnO (s)+C (s)→Zn (s)+CO (g)\mathrm{ZnO}\,\text{(s)} + \mathrm{C}\,\text{(s)} \rightarrow \mathrm{Zn}\,\text{(s)} + \mathrm{CO}\,\text{(g)}.
AnswerReduction
Ask about this question

In-text questions: corrosion (after 3.5)

Q1

Section 3.5, Intext question 1

Metallic oxides of zinc, magnesium and copper were heated with the metals zinc, magnesium and copper (each oxide with each metal). In which cases will you find displacement reactions taking place?

Tests: Using the reactivity series to predict which metal can reduce which oxide.

Show solution
  1. Reactivity: magnesium > zinc > copper. A metal displaces another only from the oxide of a less reactive metal.
  2. Zinc with copper oxide: Zn (s)+CuO (s)→ZnO (s)+Cu (s)\mathrm{Zn}\,\text{(s)} + \mathrm{CuO}\,\text{(s)} \rightarrow \mathrm{ZnO}\,\text{(s)} + \mathrm{Cu}\,\text{(s)}.
  3. Magnesium with zinc oxide: Mg (s)+ZnO (s)→MgO (s)+Zn (s)\mathrm{Mg}\,\text{(s)} + \mathrm{ZnO}\,\text{(s)} \rightarrow \mathrm{MgO}\,\text{(s)} + \mathrm{Zn}\,\text{(s)}.
  4. Magnesium with copper oxide: Mg (s)+CuO (s)→MgO (s)+Cu (s)\mathrm{Mg}\,\text{(s)} + \mathrm{CuO}\,\text{(s)} \rightarrow \mathrm{MgO}\,\text{(s)} + \mathrm{Cu}\,\text{(s)}.
AnswerZinc + copper oxide, magnesium + zinc oxide, and magnesium + copper oxide.
Ask about this question
Q2

Section 3.5, Intext question 2

Which metals do not corrode easily?

Tests: Linking resistance to corrosion with low reactivity.

Show solution
  1. Metals at the bottom of the reactivity series, such as gold and platinum, do not react with air or moisture, so they do not corrode easily.
AnswerLess reactive metals such as gold and platinum.
Ask about this question
Q3

Section 3.5, Intext question 3

What are alloys?

Tests: Defining an alloy with examples.

Show solution
  1. An alloy is a homogeneous mixture of two or more metals, or of a metal and a non-metal.
  2. Examples: brass (copper and zinc), bronze (copper and tin), solder (lead and tin), steel (iron and carbon).
AnswerA homogeneous mixture of two or more metals, or a metal and a non-metal, such as brass or steel.
Ask about this question

Chapter notes

Check yourself: 5 quick questions on Metals and Non-metals — Part 2

Questions are from the NCERT Class 10 Science textbook, Chapter 3; word problems are paraphrased with every number kept.

Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.

Check yourself on this chapter

Practise with fresh questions at your level, free: 10 questions a day with an account.