AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.
ScienceClass 10CBSE
Class 10 Science Chapter 2 Intext Questions and Answers
Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 2. Every equation is balanced and checked, and every pH answer is worked from the scale.
NCERT solutions for the intext questions of Class 10 Science Chapter 2 Acids, Bases and Salts: all 19 questions answered step by step, as ideal answers in the CBSE board format. Free, with a doubt chat on every question.
Key ideas
Acids give H⁺ (H₃O⁺) ions in water; bases give OH⁻ ions. Without water there is no acidic behaviour.
Acid + metal → salt + hydrogen. Acid + metal carbonate → salt + water + carbon dioxide. Acid + base → salt + water (neutralisation).
pH below 7 is acidic, 7 is neutral, above 7 is basic. The lower the pH, the higher the H⁺ concentration.
Always add acid to water, slowly, never water to acid: the mixing is highly exothermic.
From common salt: NaOH (chlor-alkali), bleaching powder CaOCl₂, baking soda NaHCO₃, washing soda Na₂CO₃·10H₂O. Plaster of Paris CaSO₄·½H₂O sets with water into gypsum CaSO₄·2H₂O.
In-text questions: identifying acids and bases (section 2.1)
Q1
Section 2.1 (a), Intext question 1
You have been provided with three test tubes. One of them contains distilled water and the other two contain an acidic solution and a basic solution, respectively. If you are given only red litmus paper, how will you identify the contents of each test tube?
Tests: Using one indicator, step by step, to tell an acid, a base and water apart.
Show solution
Dip red litmus into each solution. The one that turns it blue is the basic solution.
Take that blue litmus paper and dip it into the other two. The one that turns it back red is the acid.
The solution that changes neither red nor blue litmus is distilled water (neutral).
AnswerRed litmus turns blue in the base. That blue paper turns red in the acid. The one with no change is distilled water.
Ask about this question
In-text questions: reactions of acids and bases (section 2.1)
Q1
Section 2.1 (b), Intext question 1
Why should curd and sour substances not be kept in brass and copper vessels?
Tests: Explaining why acids must not be stored in reactive metal containers.
Show solution
Curd and sour foods contain acids (curd has lactic acid).
These acids react with copper and with the zinc in brass, forming salts that are poisonous and spoil the food. The vessel is also corroded.
AnswerThe acids in them react with copper and brass, forming toxic compounds that make the food unsafe to eat.
Ask about this question
Q2
Section 2.1 (b), Intext question 2
Which gas is usually liberated when an acid reacts with a metal? Illustrate with an example. How will you test for the presence of this gas?
Tests: Writing the reaction of an acid with a metal and the test for hydrogen.
Show solution
Hydrogen gas is liberated.
Example: zinc with dilute sulphuric acid, Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g).
Test: bring a burning candle near the gas. It burns with a pop sound, which shows hydrogen.
AnswerHydrogen. Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g). It burns with a pop sound when a burning candle is brought near.
Ask about this question
Q3
Section 2.1 (b), Intext question 3
Metal compound A reacts with dilute hydrochloric acid to produce effervescence. The gas evolved extinguishes a burning candle. Write a balanced chemical equation for the reaction if one of the compounds formed is calcium chloride.
Tests: Identifying a metal carbonate from its reaction with an acid.
Show solution
A gas that extinguishes a burning candle is carbon dioxide, so A is a carbonate. Calcium chloride forms, so A is calcium carbonate.
CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g)
AnswerA is calcium carbonate. CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g)
Ask about this question
In-text questions: what acids and bases have in common (after 2.2)
Q1
Section 2.2, Intext question 1
Why do HCl, HNO₃, etc., show acidic characters in aqueous solutions while solutions of compounds like alcohol and glucose do not show acidic character?
Tests: Linking acidic behaviour to H⁺ ions in water.
Show solution
HCl and HNO₃ ionise in water and give H⁺ ions, which combine with water to form H₃O⁺ ions. These ions cause acidic behaviour.
Alcohol and glucose contain hydrogen, but they do not ionise in water to give H⁺ ions, so they are not acidic.
AnswerHCl and HNO₃ release H⁺ (H₃O⁺) ions in water; alcohol and glucose do not, though they contain hydrogen.
Ask about this question
Q2
Section 2.2, Intext question 2
Why does an aqueous solution of an acid conduct electricity?
Tests: Explaining conduction in acid solutions by ions.
Show solution
An acid in water forms ions, H⁺ (as H₃O⁺) and the acid's anion, such as Cl⁻. These ions carry the current.
AnswerIt contains ions (H₃O⁺ and the anion) that carry electric current.
Ask about this question
Q3
Section 2.2, Intext question 3
Why does dry HCl gas not change the colour of the dry litmus paper?
Tests: Recognising that acids need water to release H⁺ ions.
Show solution
H⁺ ions form only when HCl dissolves in water. Dry HCl gas and dry litmus have no water, so no H⁺ ions form and the colour does not change.
AnswerWithout water, HCl does not release H⁺ ions, so it shows no acidic behaviour.
Ask about this question
Q4
Section 2.2, Intext question 4
While diluting an acid, why is it recommended that the acid should be added to water and not water to the acid?
Tests: Explaining the safe way to dilute an acid.
Show solution
Mixing a concentrated acid with water is highly exothermic.
If water is added to acid, the heat can boil the small amount of water at once, splashing acid out and even breaking the container. Adding acid slowly to a lot of water, with stirring, lets the water absorb the heat.
AnswerThe process is highly exothermic; water added to acid can boil and splash the acid out. Acid added slowly to water is safe.
Ask about this question
Q5
Section 2.2, Intext question 5
How is the concentration of hydronium ions (H₃O⁺) affected when a solution of an acid is diluted?
Tests: Relating dilution to ion concentration.
Show solution
The same H₃O⁺ ions are spread through more water, so there are fewer per unit volume. The concentration decreases.
AnswerIt decreases.
Ask about this question
Q6
Section 2.2, Intext question 6
How is the concentration of hydroxide ions (OH⁻) affected when excess base is dissolved in a solution of sodium hydroxide?
Tests: Relating added base to ion concentration.
Show solution
More base in the same volume releases more OH⁻ ions per unit volume, so the concentration increases (until the solution is saturated).
AnswerIt increases.
Ask about this question
In-text questions: how strong are acid or base solutions (after 2.3)
Q1
Section 2.3, Intext question 1
You have two solutions, A and B. The pH of solution A is 6 and pH of solution B is 8. Which solution has more hydrogen ion concentration? Which of this is acidic and which one is basic?
Tests: Reading H⁺ concentration and acidity from pH.
Show solution
The lower the pH, the higher the H⁺ concentration. A (pH 6) has more H⁺ ions than B (pH 8).
pH below 7 is acidic, above 7 is basic. So A is acidic and B is basic.
AnswerA has more H⁺ ions. A is acidic, B is basic.
Ask about this question
Q2
Section 2.3, Intext question 2
What effect does the concentration of H⁺(aq) ions have on the nature of the solution?
Tests: Connecting H⁺ concentration to acidity and pH.
Show solution
The higher the H⁺ concentration, the more acidic the solution and the lower its pH. As H⁺ concentration falls, the solution becomes less acidic, then neutral, then basic.
AnswerMore H⁺ ions make the solution more acidic (lower pH); fewer make it less acidic or basic.
Ask about this question
Q3
Section 2.3, Intext question 3
Do basic solutions also have H⁺(aq) ions? If yes, then why are these basic?
Tests: Explaining that basicity depends on which ion is in excess.
Show solution
Yes. Every aqueous solution has some H⁺ ions from water. A basic solution is basic because its OH⁻ ion concentration is greater than its H⁺ ion concentration.
AnswerYes; they are basic because OH⁻ ions outnumber H⁺ ions.
Ask about this question
Q4
Section 2.3, Intext question 4
Under what soil condition do you think a farmer would treat the soil of his fields with quick lime (calcium oxide) or slaked lime (calcium hydroxide) or chalk (calcium carbonate)?
Tests: Using neutralisation to correct soil pH.
Show solution
Quick lime, slaked lime and chalk are basic. They are added when the soil is too acidic, to neutralise the excess acid.
AnswerWhen the soil is acidic.
Ask about this question
In-text questions: more about salts (after 2.4)
Q1
Section 2.4, Intext question 1
What is the common name of the compound CaOCl₂?
Tests: Naming chemicals made from common salt and lime.
Show solution
CaOCl₂ is calcium oxychloride, commonly called bleaching powder.
AnswerBleaching powder
Ask about this question
Q2
Section 2.4, Intext question 2
Name the substance which on treatment with chlorine yields bleaching powder.
Tests: Recalling the preparation of bleaching powder.
Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.
Check yourself on this chapter
Practise with fresh questions at your level, free: 10 questions a day with an account.