AI-generated solutions. The solutions and explanations on this page are written by AI. We check the final answers with automated tests, but AI can still make mistakes, especially in explanations and in figures described in words. If something looks wrong, ask in the doubt chat on that question or check with your teacher.
ScienceClass 10CBSE
Class 10 Science Chapter 1 Intext Questions and Answers
Step-by-step solutions to every in-text and end-of-chapter question in NCERT Class 10 Science Chapter 1. Every equation is balanced and checked. Open a solution one step at a time, tap a follow-up question, or ask your own doubt about any step.
NCERT solutions for the intext questions of Class 10 Science Chapter 1 Chemical Reactions and Equations: all 8 questions answered step by step, as ideal answers in the CBSE board format. Free, with a doubt chat on every question.
Key ideas
A balanced equation has the same number of atoms of each element on both sides (law of conservation of mass). Change coefficients, never formulas.
State symbols: (s) solid, (l) liquid, (g) gas, (aq) dissolved in water.
Combination: two substances form one. Decomposition: one splits into two or more (by heat, light or electricity).
Displacement: a more reactive element replaces a less reactive one. Double displacement: two compounds exchange ions.
Oxidation is gain of oxygen (or loss of hydrogen); reduction is loss of oxygen (or gain of hydrogen). They happen together.
In-text questions: chemical equations (after 1.1)
Q1
Section 1.1, Intext question 1
Why should a magnesium ribbon be cleaned before burning it in air?
Tests: Explaining what has to happen before a reaction can be observed cleanly.
Show solution
Magnesium reacts slowly with oxygen in the air, so a stored ribbon is covered with a thin layer of magnesium oxide.
This layer stops oxygen reaching the metal underneath, so the ribbon is hard to light and burns poorly.
Rubbing it with sandpaper removes the oxide layer and exposes fresh magnesium, which burns with a dazzling white flame.
AnswerTo remove the layer of magnesium oxide on its surface, so that the fresh metal can react with oxygen.
Ask about this question
Q2
Section 1.1, Intext question 2
Write the balanced equation for each of the following reactions.
Why: Aluminium is +3 and sulphate is −2, so aluminium sulphate is Al₂(SO₄)₃.
Three sulphate groups on the left need 3 BaSO₄ on the right; that uses 3 Ba, so 3 BaCl₂ on the left.
3 BaCl₂ gives 6 Cl, so 2 AlCl₃ on the right, which also uses the 2 Al: 3BaCl2+Al2(SO4)3→3BaSO4+2AlCl3.
Answer3BaCl2+Al2(SO4)3→3BaSO4+2AlCl3
(iii)Sodium + Water → Sodium hydroxide + Hydrogen
Skeletal: Na+H2O→NaOH+H2. Hydrogen: 2 on the left, 3 on the right.
Use 2 H₂O and 2 NaOH (4 H on each side with H₂), then 2 Na: 2Na+2H2O→2NaOH+H2.
Answer2Na+2H2O→2NaOH+H2
Ask about this question
Q3
Section 1.1, Intext question 3
Write a balanced chemical equation, with state symbols, for each reaction.
(i)
Solutions of barium chloride and sodium sulphate in water react to give insoluble barium sulphate and a solution of sodium chloride.
(ii)
Sodium hydroxide solution reacts with hydrochloric acid solution to produce sodium chloride solution and water.
Tests: Writing balanced equations with the physical state of every substance: (s), (l), (g), (aq).
Show solution
(i)Solutions of barium chloride and sodium sulphate in water react to give insoluble barium sulphate and a solution of sodium chloride.
Both reactants are dissolved in water: (aq). Barium sulphate is insoluble: (s). Sodium chloride stays in solution: (aq).
Balance chlorine and sodium with 2 NaCl: BaCl2(aq)+Na2SO4(aq)→BaSO4(s)+2NaCl(aq).
AnswerBaCl2(aq)+Na2SO4(aq)→BaSO4(s)+2NaCl(aq)
(ii)Sodium hydroxide solution reacts with hydrochloric acid solution to produce sodium chloride solution and water.
Reactants and sodium chloride are in solution: (aq). Water formed is a liquid: (l).
The equation is already balanced: NaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l).
AnswerNaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l)
Ask about this question
In-text questions: combination and decomposition (section 1.2)
Q1
Section 1.2 (a), Intext question 1
A solution of a substance 'X' is used for white washing.
(i)
Name the substance 'X' and write its formula.
(ii)
Write the reaction of the substance 'X' with water.
Tests: Recognising a combination reaction and writing its equation.
Show solution
(i)Name the substance 'X' and write its formula.
X is calcium oxide (quicklime), CaO. It is mixed with water to make the white wash.
AnswerCalcium oxide (quicklime), CaO.
(ii)Write the reaction of the substance 'X' with water.
Calcium oxide reacts vigorously with water to form slaked lime, calcium hydroxide, giving out a lot of heat: CaO(s)+H2O(l)→Ca(OH)2(aq).
On the wall, calcium hydroxide slowly reacts with carbon dioxide in air to form a thin shiny layer of calcium carbonate: Ca(OH)2(aq)+CO2(g)→CaCO3(s)+H2O(l).
AnswerCaO(s)+H2O(l)→Ca(OH)2(aq)
Ask about this question
Q2
Section 1.2 (a), Intext question 2
In the activity on electrolysis of water, why is the amount of gas collected in one test tube double the amount in the other? Name this gas.
Tests: Reading the ratio of products from a balanced decomposition equation.
Show solution
Water decomposes on passing electricity: 2H2O(l)electricity2H2(g)+O2(g).
Two volumes of hydrogen form for every one volume of oxygen, so one tube collects twice as much gas.
AnswerWater gives hydrogen and oxygen in the ratio 2 : 1 by volume. The tube with double the gas holds hydrogen.
Ask about this question
In-text questions: displacement, double displacement and redox (section 1.2)
Q1
Section 1.2 (b), Intext question 1
Why does the colour of copper sulphate solution change when an iron nail is dipped in it?
Tests: Explaining a displacement reaction from what you observe.
Show solution
Iron is more reactive than copper, so it displaces copper from copper sulphate: Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s).
The blue copper sulphate is replaced by light green iron sulphate, and brown copper coats the nail.
AnswerIron displaces copper. Blue copper sulphate becomes light green iron sulphate, and a brown coating of copper forms on the nail.
Ask about this question
Q2
Section 1.2 (b), Intext question 2
Give an example of a double displacement reaction other than the reaction of sodium sulphate with barium chloride.
Tests: Giving a correct example of a double displacement reaction.
Show solution
Silver nitrate and sodium chloride exchange ions, forming a white precipitate of silver chloride: AgNO3(aq)+NaCl(aq)→AgCl(s)+NaNO3(aq).
AnswerAgNO3(aq)+NaCl(aq)→AgCl(s)+NaNO3(aq)
Ask about this question
Q3
Section 1.2 (b), Intext question 3
Identify the substances that are oxidised and the substances that are reduced in the following reactions.
(i)
4Na(s)+O2(g)→2Na2O(s)
(ii)
CuO(s)+H2(g)→Cu(s)+H2O(l)
Tests: Identifying what is oxidised and reduced by gain or loss of oxygen or hydrogen.
Show solution
(i)4Na(s)+O2(g)→2Na2O(s)
Sodium gains oxygen to become sodium oxide: sodium is oxidised.
Oxygen is the substance that oxidises it, so oxygen is reduced.
Questions from the NCERT textbook are reproduced for educational and review purposes only, under fair dealing. All copyrights in the questions belong to NCERT. Solutions and explanations provided here are original works by Your Abhyaasika, generated with AI, and may contain mistakes. Your Abhyaasika is not affiliated with CBSE or NCERT.
Check yourself on this chapter
Practise with fresh questions at your level, free: 10 questions a day with an account.